User Manual for KVM-08WS
Contents
1. Enter will show the all the port names USER SECURITY There are two types of user levels SUPERVISOR and USER There is one SUPERVISOR and up to eight USERs can be configured o o o o o o Ba J A LA y on Press the Enter key or right button of mouse for editing The left top S means SUPERVISOR and 1 2 3 8 mean USERs The maximum length of NAME and PASSWORD is eight characters A Z and 0 9 14 ACCESS LIST Only SUPERVISOR can configure the ACCESS LIST The first column is the port number following the server computer name list The last 8 columns are the access right of each user Use the Enter key or left button of mouse to active deactivate the access right of each port X means to disable access and O means to enable access HOTKEY gt Some keyboards may not equip with all the special keys Making sure the key you select is available in you keyboard TIME SETTINGS When the Auto Scan function is activated the LCD KVM switch will auto scan the host ports one by one in the interval as setting Notice that the port without connecting to a computer server will be skipped over on the scan The interval range is 5 99 seconds and the default interval is 10 seconds Press Enter key to save the SCAN TIME setting 15 OSD MOUSE You can change the moving speed of mouse cursor2. 16 port mixed connection KVM You can access multiple hosts using the LCD console while saving money and efforts A single KVM 1508WS KVM 1516WS LCD KVM can control up to 8 hosts or up to 16 hosts In addition both have independent cascade connection port so KVM 1508WS consoles can be connected in series to control 512 hosts and KVM 1516WS consoles can be connected in series to control 2048 hosts Since LCD KVM series supports hosts of both PS 2 and USB port KVM cable of PS 2 or USB connector can be selected for hosts depending on cables connecting the switcher and host Major features include OSD menu password security mechanism hotkey control and auto scanning Keyboard and mouse simulation can boot computers at the same time All hosts connected can be accessed conveniently via OSD On Screen Display activated by keyboard or through hotkey combination input The auto scanning feature can automatically scan and monitor operation status of each host connected It is simple and convenient to install the LCD KVM just inserting cables to corresponding ports No installation disk or complicated installation program is needed and no compatibility problem exists LCD KVM series is the best choice to save time and efforts Since all hosts can be controlled from a single main control terminal using the LCD KVM console 1 avoids the cost of keyboard mouse and monitor of each host 2 saves work space 3 saves power 4 saves the trouble of m
3. 8 Daisy Chaining Support Daisy chain 8 layer amp Cascade 2 layer function Computer port selection On Screen Display OSD Menu Hot Key Push Button Hotkey Provide various Hotkey Scroll Lock Cap Lock Num Lock Alt a oo Win LEDs i sts Power on amp Power on amp Selection 0 Security Provide ACL Access control List security function store up 8 independent controllable computers list Multilingual OSD on 8 Languages English German Spanish Italian Russian screen display control Japanese Simplified Chinese France 5 99 Sec PS 2 or USB PS 2 or USB Max PC connection 19 Rack mount 1U S Mechanical 19 Rack mount 1U Dimension W x H x D 446 4 x 44 x 406 4 mm LCD Drawer Front VIEW EES EP ae t 4 O lz Mm t gt asese OAE p nae wN gt se CG dma dae dem lee dam ee Kam E Daisy chain PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 8 port LCD Drawer Rear VIEW 100 240Vac 50 60Hz Daisy chain 16 port LCD Drawer Rear VIEW PC 1 PC2 PC3 PC4 PC5 PC6 PC7 PC 8 for PS 2 PC view Pe Pee n for USB PC ZF Diagram 16 port LCD Drawer PC1 PC2 PC3 PC4 PC5 PC6 PC7 E 2 ee INSTALLATION On the back of the KVM Switch each of the 8 16 PC ports has a HDB15 type connector Each cable that comes with the Switch has a 3 in 1 connector at one end and a single HDB15 male connecto
4. AN TIME This is the time interval for auto scan function When auto scan function is activated the KVM switch will auto scan the host port one by one in the interval as setting Notice that the port without connecting to a computer server will be skipped over on the scan The numeric keypad is not supported while in OSD screen the arrow keys PgUp PgDn and Enter keys are supported Main Menu There are eight menus to choose from E C T O P L A N G U AG E LANGUAGE The OSD supports eight languages English French German Italian Spanish Simplified Chinese Japanese and Russian The default language is ENGLISH Moving the cursor by keyboard Up Arrow key or the Down Arrow key or mouse to select the language you like C H OO SE A L A N G U AGE 0 EN GL I S i aie PORT NAME EDIT S S T E M 0 1 The first line bar 1s Bank number following lines are port name list Use keyboard Up Arrow key Down Arrow key or mouse to select the port After select the port you can either press the Enter Key or move the cursor to port name and double click left button of mouse to switch the port immediately Press PgUp key or PgDn key for selecting the previous or next Bank Press Enter key for editing port name Press Ese key to cancel the editing without any change or press Enter key to complete the editing PORT SEARCH gt Search the computer by port name
5. LCD Drawer User Manual LCD Monitor OS Support 15 6 OW P Linuxn Mac Co m DO COS Unix This manual covering various aspects of the equipment such as installation setup and cascade will help you make full use of this LCD KVM Drawer Please read this manual carefully and install and operate the equipment according to the manual to avoid damage to this product its accessories Product package includes following items 1 15 6 LCD KVM Drawer 1 AC Power Cord 1 Rack installation bracket one pair 1 CD USER S manual Please check items above If any item is missing or damaged please contact your dealer promptly BRIEF INTRODUCTION FEATURES SPECIFICATIONS INSTALLATION Table of contents USAGE Hotkey Commands and OSD Operations CERTIFICATIONS BRIEF INTRODUCTION KVM 1508WS KVM 1516WS LCD KVM console control panel integrates keyboard Widescreen LCD display and touch pad in a drawer type worktable and provides a convenient space saving operation mode for KVM switch technology The cover is an widescreen LCD display while the base is keyboard and touchpad buckles on the left and right are moved aside to open the cover It can be operated once the KVM module is pulled out Once the operation is completed push the KVM module back to the rack KVM 1508WS KVM 1516WS console is a control device integrating 15 6 LCD 86 key keyboard touchpad mouse and 8 port or
6. ery the daisy chained Slaves every 30 seconds You can also cascade through computer port This cascade can work with other brand of KVM switch but you need to change the Hotkey of slave KVM switches so that the master and slave KVM switches do not use the same Hotkey t gt e wae EDO i EB Ep ie is Daisy chain Figure 6 Cascade through Computer Port Usage Hotkey Commands and OSD Operations Buttons The push Buttons 1 16 You can simply switch to a port by pressing the corresponding button For 16 ports LCD Drawer please press button 1 16 directly to select the port you want Hotkey You can conveniently command LCD Drawer through a simple hot key sequence To send commands to Drawer you must press the hotkey default Caps Lock twice within 2 seconds You will hear a beep sound confirming entering Hotkey mode If you do not press any key during Hotkey mode over 2 seconds the Hotkey mode will be escaped and back to Normal state The default hotkey is Caps Lock but you can change hotkey as your application convenience If you prefer to use other hotkey please go to OSD menu and change the default hotkey to the other The table blow lists all supported hotkey commands The default hotkey starts from Caps Lock Caps Lock then the keys on the table list Brings up the OSD overlay screen Switches to the previous port Switches to following port 1 2 8 bank The first digit is the Switch ba
7. hold the right button of the mouse and hit the Esc key to bring up the Main Menu 10 OSD On Screen Display OSD Menu provides a menu driven interface to control the LCD KVM switch This OSD Menu has four types of display screens 1 Login Window When powering on this LCD KVM switch it will prompt a login window and ask for user name and password This OSD function can setup one SUPERVISOR and eight USERs SUPERVISOR can access to all OSD functions USER can access to port name and port search only 2 Status screen after the log in the Status screen will show up to display the current port settings and Hotkey type 3 Port Name this menu displays port status and you can switch to other port right here 4 Main Menu there are eight menus to operate They are listed as below Modify OSD MOUSE speed Login Window Power on the local console monitor and power on the KVM Switch by plug in the power adapter If the Security function is enabled default is disabled the Login window will show up waiting for user name and password The Login window The default is SUPERVISOR and default user name is eight zeros 00000000 The default password is eight zeros 00000000 There are case insensitive while OSD display fixed in upper case After login or port switch by panel button OSD or Hotkey the Status screen will show up to display the information of current settings one digit BANK NUMBER tw
8. in this item There are three levels to choose from The fastest moving speed is FAST the second is MIDDLE and the slowest is SLOW Using and key on keyboard to move highlight bar to the wished speed Press the Enter key to go into effect a TG Certifications FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received Include interference that may cause undesired operation CE This equipment is in compliance with the requirements of the following regulations EN 55 022 CLASS B RoHS All contents of this package including products packing materials and documentation comply with RoHS ce Fe Trademarks All the companies brand names and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companie 1G
9. nk number starting 01 02 32 port with 1 The KVM switch on the daisy chain line is on bank 1 the Master A standalone KVM switch is also on bank 1 The second amp third digits are port numbers starting with 01 PgUp Switches to the previous bank PgDn Switches to next bank B Turns the beep sound on off For SUPERVISORS that will set the OSD back to the factory default value except the User Security For SUPERVISORS that activates the Auto Scan function For SUPERVISORS that turns the Security function on off Default is off Log out that s only valid when the security is on Example 1 To bring up the OSD overlay window press Caps Lock Caps Lock and the Space Bar Immediately the OSD overlay screen will appear The superimposed menu screen is generated by the LCD Drawer and does not affect your computers or software function in any way Le Example 2 To switch to Bank 1 Portl press Caps Lock Caps Lock and 1 0 1 please enter next key in 2 seconds in the Hotkey sequence please enter next key in 2 seconds in the Hotkey sequence Actually there are two methods to bring up the OSD overlay window 1 Activate OSD by press Hotkey press Hotkey twice then press Space bar 2 Activate OSD by Mouse Press and hold the left button of the mouse and hit the Esc key to show the Status screen Press and
10. o digit PORT NUMBER PORT NAME and current Hotkey settings Pressing any key or moving mouse will let the Status screen disappeared The selected bank no The selected port no 1 The Status screen The selected Hotkey 11 Auto LOGOUT function In Login window if no input for username and password over 1 minute the screen will disappear Hit any key to bring up the Login window again At normal operation if no input from the console keyboard or mouse over 10 minutes the LCD KVM switch will turn off the screen display and show up Login window asking for user name and password One more minute of keyboard mouse inactivity the monitor will be turned off gt The first page shows the current port name and the selected port and the operation hint The selected bank The selected port Operation Hint Auto Scan Interval Go to the Main Menu E To log out the OSD If Security is enabled it will show up the Login window waiting for username and password If Security is disabled it will show up the Status window O B _ Switch to the selected port C SSCS o on gt a Show ports 09 16 Show ports 17 24 il Zoe Fl F2 F3 Select the port press Enter to switch Esc l 2 3 4 USER There are two types of user levels SUPERVISOR and USER The default is SUPERVISOR SUPERVISOR can setup and change the OSD settings at Main Menu USER can only do the port switch and port search SC
11. oving from one computer to another For Mac and Sun hosts USB cable must be used for connection FEATURES The console with 15 6 LCD display is integrated to a drawer type worktable of 1U height to facilitate rack installation Support combo PS 2 amp USB interface for connecting to computer ports conveniently Support MS windows Netware Unix and Linux Support iMAC Power MAC and Sun Micro Systems with USB connection No Software Required easy computer selection via On Screen Display OSD Menu Push Buttons and Hotkeys Provide various Hotkey Scroll Lock Cap Lock Num Lock L Alt L Ctrl L Win R Alt R Ctrl R Win for switching computer port and other control functions so Hotkey function can be used in various types of keyboards and to avoid Hotkey duplicate problem Provide ACL Access Control List security function Store up to 8 independent user accounts Hot Plug add or remove connected computers without powering off the LCD Drawer Support two user layers and search computer server name Keyboard status restored when switching computer Support Daisy chain 8 layer amp Cascade 2 layer function SPECIFICATIONS Feature Specification PC Type Combo ae amp USB Connector Support ae m Port Connector fps PC Ports Ports 816 16 Meomeneoro eem O LCD Drawer to PC 16 feet 5m LCD Resolution Resolution 15 6 15 6 LCD 1366 768 1366 15 6 LCD 1366 768 76
12. r at the other end Plug the single connector end of the cable into the KVM PC port and then plug the other end of cable to a PC VGA port Figure 1 3 in 1 DB15 PS2 cable a PS 2 computer Plug in the PS 2 mouse connector to the computer mouse port then the PS 2 keyboard connector to computer keyboard port Figure 2 2 in 1 DB15 USB Cable b USB computer Plug in the USB connector to the computer USB port This single USB port can handle both keyboard and mouse data Daisy Chain Connection Use one end of daisy chain cable to connect to the Daisy Chain port of Master KVM switch and connect the other end of daisy chain cable to the Local Console port of the next Slave KVM switch Please repeat the connection procedures for next Slave KVM switch You can daisy chain up to eight banks in maximum gt 2A ly 100 240Vac 50 60Hz Daisy chain gt oe he ee Pe he Figure 5 Daisy Chain Connection The console OSD menu will show only the port information of the master KVM switch When the master unit starts up it will query all daisy chained Slave units and automatically set up the Bank ID for each Slave unit So the 7 seg LED on the Master unit will display 1 Slave 1 will display 2 Slave 2 will display 3 and so on If not so please reset press BANK and port button the Master unit to update the Bank ID immediately Hot Plug function is supported in daisy chain connection The Master unit will auto qu
Download Pdf Manuals
Related Search