User`s manual
Contents
1. gloss rear side dedicated for projection with LCD and DLP projectors Fabrics with slightly directional characteristics dedicated for business presentations Fabrics of screens bigger than 200cm in height is welded with 2 parts welding line remains invisible during projection Gain 1 2 viewing angle 120 degrees thickness 0 4mm New Coral NC Rear projection white vinyl mono foil gloss front side projection matt rear side dedicated for rear projection with LCD and DLP projectors Recommended for business presentations due to directional optical characteristics of the fabrics Fabrics of screens bigger than 200cm in height is welded with 2 parts welding line remains invisible during projection Gain 3 2 viewing angle 90 degrees thickness 0 6mm grubo 0 4mm Dimensions of projection screens Screen width Viewing area size Screen Screen case size Projection fabrics Top belt Version Net cm cm aspect W x H x D cm max length width cm weigth ratio cm 170 x 95 6 106 3 16 9 16 10 130 6 141 3 35 BT 7 7 170 x 127 5 4 3 137 5 8 BB 7 8 re 170 x 95 6 106 3 16 9 16 10 493 423x12 8 105 6 116 3 8 BB 7 5 180 x 101 3 112 5 16 9 16 10 101 3 112 5 7 9 180 x 135 4 3 135 7 8 180 x 180 1 1 180 8 0 2002. Silver coating allows 3D projection in Active shutter glasses and Passive polarized glasses Surface directional reflection characteristics determines positioning viewers in front of the screenn Gain 2 8 thickness 0 7mm Matt White P MWP a special screen dedicated polyester fabric double side covered with vinyl black back surface and white front projection surface recommended for application with DLP and LCD multimedia projectors Neutral color of the surface enables projection from any directions Gain 1 0 viewing angle 150 degrees thickness 0 7 mm Matt White MW a special screen dedicated polyester fabric double side covered with vinyl black back surface and white front projection surface recommended for application with DLP and LCD multimedia projectors Neutral color of the surface enables projection from any directions Gain 1 0 viewing angle 150 degrees thickness 0 35 mm Matt Grey MG a special screen dedicated polyester fabric double side covered with vinyl black back surface and grey front projection surface recommended for application with high brightness DLP and LCD multimedia projectors The surface offers deeper level of black and more realistic rich dark colors recognized as a feeling of higher image contrast Recommended for home cinema applications Gain 0 8 viewing angle 150 degrees thickness 0 35 mm White Ice WI White color vinyl mono foil matt front size projection
3. places where it will be exposed to contact with mild or water Do not ever touch or operate charger with wet hands Do not cover working charger with blanket or any other cloth It would cause charger overheating and fire Do not try disassembling or any modifications of charger It would cause electric shock or serious accident Charger should be operated within power supply conditions recommended by it s manufacturer Burns electric shock charger overheating smoke emission explosion or fire would happen when charger will be connected to power supply different than recommended Safety rules for rechargeable battery operation Keep rechargeable battery out of reach of children Do not expose rechargeable battery nor to fire nor high temperatures as it could result in explosion or fire Do not use nor store rechargeable battery at places characterizing with increased temperature i e near heating devices to avoid battery ignition or explosion Do not solder directly change shape modify nor disassemble rechargeable battery it could result in damage of terminals or battery leakage Do not touch plus and minus battery terminals with any metal objects Pay attention to prevent any metal objects from contact with plus and minus terminals during battery transportation or storage In case eyes would have contact with liquid leacked from the battery wash eyes with pure water but do not rub eyes Immediately contact doctor f
4. x 112 5 125 16 9 16 10 147 5 160 35 BT 9 7 200 x 150 4 3 160 8 BB 9 8 240 200 x 112 5 125 16 9 16 10 222x123x128 1225 135 8 BB 9 5 210 x 118 2 131 3 116 9 16 10 118 2 131 3 9 5 210 x 157 5 4 3 157 5 9 8 210 x 210 1 1 210 10 0 230 x 129 5 143 8 116 9 16 10 164 5 178 8 35 BT 11 6 230 x 172 5 4 3 182 5 8 BB 11 7 240 230 x 129 5 143 8 116 9 16 10 257 x 12 3 x 12 8 139 5 153 8 8 BB 11 3 240 x 135 150 16 9 16 10 135 150 11 3 240 x 180 4 3 180 11 7 240 x 240 1 4 240 260 x 146 3 162 5 16 9 16 10 181 3 197 5 35 BT 13 8 260 x 195 4 3 205 8 BB 14 0 270 260 x 146 3 162 5 16 9 16 10 285 x 12 3 x 12 8 156 3 172 5 8 BB 13 5 270 x 151 9 168 8 16 9 16 10 151 9 168 8 13 5 270 x 202 5 4 3 202 5 14 0 270 x 270 1 1 270 14 0 290 x 163 1 181 3 16 9 16 10 198 1 216 3 35 BT 15 8 290 x 217 5 4 3 227 5 8 BB 15 6 300 290 x 163 1 181 3 16 9 16 10 349x123x128 1731 191 3 8 BB 14 0 300 x 168 8 187 5 116 9 16 10 168 8 187 5 z 14 0 300 x 225 4 3 225 15 6 300 x 300 1 1 300 16 0 BT and BB versions are available with MW or MG fabrics only approximate value for the screen with Matt White fabrics Version BB 5 cm width black border surrounding the viewing area Version BT 5 cm width black border surrounding the viewing area and additional black top 30 cm above the top black border Motor Rechargeable Battery Electric t
5. Electric projection screen Avers Akustratus 2 User s manual Read these instructions carefully before operating the screen Dear Customer Thank you very much for the purchase of our product The manual booklet contains all operation information you may require to install properly and operate the screen We hope it will help you to get the most performance and enjoyment of yournew screen Enjoytime with the AversScreens product SAFETY INFORMATION NOTICE Important safety information Follow the instructions described in the operating manual for safety reasons After reading the manual please store it in a safe place just in case you need it in the future NOTICE THE DEVICE HAVE TO BE EARTHED WARNING 1 Disconnect the device from the power supply if it will not be used within longer period of time 2 Do not open the casing of the device in order to avoid possible electric shock There are not any user operated parts inside the case of the screen All service work can be done by Avers Authorized Service Center personnel only 3 Do not remove the Ground pin from the power outlet neither connect the device to the socket without the Ground pin If you can t put the plug to the power outlet please ask electrician for assistance Table of contents 1 Safety rules 1 1 Declaration of Conformity CE 2 Product specification 2 1 Contents of package 2 2 Technical data 3 Screen installation 3 1 Installation dir
6. IGGER PILOT Only projectors equipped with remote control dedicated TRIGGER OUTPUT can provide 12V DC control signal essential for automatic operation Akustratus will roll out automatic when the projector will be powered on and the screen will roll in as soon as projector will be powered off 4 3 Screen maintenance Pojection screen Avers do not require periodical service maintenance Clean dust from the screen case and fabrics with dry soft cloths If needed use moisturized cloth with soft detergent to remove stains After stain removal dry the cleaned surface with cloth carefully 4 4 Before calling the service Symptoms Reasons Remedy No reaction for commands Power failure Check transmitter s battery then connect from RF transmitter screen s battery charger to charge it Erased control unit s memory Program transmitter s at control unit s memory Screen do not operate Disconnected trigger transmitter Connect trigger transmitter to projecotr s automatically exchausted battery at trigger transmitter Trigger out or exchange battery at trigger transmitter The screen fabrics does not The screen was not installed properly in Check if the screen case is properly leveled roll down smoothly horizontal position Reinstall the screen correctly The screen stops in the There are some objects on the bottom bar Remove the objects which can block the middle position way proper work of the screen or are at the botto
7. ator a h Red charging Green battery fully charged o Picture 10 Battery chargering indication Screen s left side plastic cap removed 1 Screen Front m 2 1 O A 2 S 3 wat 4 1 Battery a 2 RF Control Board tou 5 3 P1 switch 2 or 4 Programming indicator I 6 5 Charging Board 6 Internal Charging Outlet Screen back Picture 11 Screen s bottom bar programming Picture 12 Control system programming 3 5 Screen programming I I NOTICE The screen was programmed properly at the factory and there is no need to reprogram it without any important reason Setting of screen extreme positions was made by manufacturer If you need to change the screen extreme position follow the instructions described below Programing the length of the rolled out screen screen bottom bar position Roll up the screen until it will stop automatically in the upper position Disassemble screen s left plastic cap it is fixed with screw Insert regulation wrench included in the screen set into the regulation slot see picture 11 located at the top of shorter screen s left side slot Regulation knob 2 located closer to the back of the screen enables setting of the lower extreme position of the screen bottom bar t means increasing the lenght of the fabrics is rolled down w
8. cribed at section A We recommend to mark primary transmitter so it would be recognized in the future without problem among other transmitters Disconnect battery connector from control unit for 10 seconds disconnect 4 pin battery connector Press twice P2 button at primary RF transmitter Within next 4 seconds press once button P2 located at newly assigned RF transmitter s battery compartment Programming indicator will blink several times confirming new RF transmitter s individual code was stored at control unit s memory 4 Screen operation Projection screen AVERS Akustratus 2 can be operated manually or automatically It is possible to use paralel both methods of screen operation UWAGA Nieuzywany ekran projekcyjny powinien pozostwac zwini ty Pozostawianie ekranu rozwini tego przez d u szy okres czasu mo e doprowadzi do jego uszkodzenia 4 1 Manual operation Manual screen operation is possible with RF remote transmitter or with optional wireless wall switch ALFA RADIO SWITCH Push button the screen will begin to roll down and stop automatically at the bottom position after rolling down Push Stop button of the remote transmitter screen rolling operation will be stopped Push button 4 the screen will begin to roll up and stop automatically in the upper position after rolling up 4 2 Automatic operation Automatic screen operation can be performed with optional RF transmitter ALFA TR
9. ections 3 2 Ceiling installation 3 3 Wall installation 3 4 Electric installation 3 5 Screen programming 3 6 Wireless remote control system programming 4 Screen operation 4 1 Manual operation 4 2 Automatic operation 4 3 Screen maintenance 4 4 Before asking for service 5 Warranty conditions 1 SAFETY RULES SAFETY INFORMATION NOTICE Important safety information It is important for the safety of persons to follow these instructions After reading the manual please save it just in case of need in the future Safety rules for screen operation Do not allow children to play with the fixed controls remote control Keep the remote control unit out of reach of children Frequently examine the screen installation for imbalance Do not use screen if repair or adjustment is necessary Watch the moving screen and keep the people away until the screen is completely rolled in out It will help to avoid injuries caused with moving screen Do not attach any objects to the screen s bottom bar Screen damage and or person injury danger All installation work should be carried out by the qualified technician Improper installation of the screen can cause device damage or health breakdown Ceiling wall installation can be done with the originally supplied mounting brackets dedicated for this model only Always follow the instructions described in the operating manual Safety rules for charger operation Do not use charger at
10. h screws Slide screen fixing bolts into the casette chanels see Picture 2 Twist the screen casette and slide the chanel onto the ceiling brackets front hinge see Picture 3 Twist the screen casette back to the horizontal position see Picture 4 Slide locking bolts to the lock position see Picture 4 SSS D 3 4W 55 W 6 W screen width in milimeters Picture 1 Fixing screen ceiling brackets Picture 2 Screen ceiling installation phase 1 Picture 3 Screen ceiling installation phase 2 Picture 4 Screen ceiling installation phase 3 Check the screen case leveling before first unrolling the screen Do not use the screen if it is not properly installed leveled 3 3 Wall installation Appoint the location of the ceiling mount brackets fixing points Drill holes for anchors fixing the screen brackets to the ceiling Fix the screen wall brackets to the wall with anchors see Picture 5 The mounting screws diameter should be not smaller than 8 mm In case of the cartboard plaster walls installation use cartboard plaster dedicated steel anchors with 11mm diameter screws D 3 4W 55 W 6 W screen width in milimeters Picture 5 Fixing screen wall brackets Picture 6 Screen wall installation phase 1 Fix the ceiling brackets and the wall brackets with the screws supplied with the screen Slide screen fixing bolts into the casette chanels see Picture 6 Twist
11. hen the screen is rolled out Means decreasing the length of the fabrics is rolled down when the screen is rolled out I I IMPORTANT Do not decrease tuning knob 1 the range of the rolled down surface It can damage the screen Do not increase regulation 2 the range of the surface which was rolled down behind the STOP mark placed in the upper right corner of the screen Rolling down the screen behind the mark can damage the screen 3 6 Wireless remote control system programing Akustratus 2 screens are supplied with integrated remote control system and RF remote transmitter which is programmed at control system s memory Programming procedures described below at this section are to be used if the supplied transmitter was lost or damaged or there is need to program additional transmitters purchased separately to be used with the screen If you intend to operate several Akustratus screens at the same area their transmitters should have programmed different individual codes All remote transmitters intended to control the screen must be programmed at screen s control unit memory A Assigning first transmitter to the control unit Control unit integrated at the screen can memorize 10 individual codes of compatible RF remote transmitters Power on screen connect battery charge battery if it was disconnected for a longer period of time before Press P1 button located at battery charging board installed under left screen s pla
12. m bar way Power failure Check the propriety of electric installation and the state of the power wires At other cases please contact service 10 5 Warranty conditions 1 Avers screens warranty period is 24 months from the date of purchase confirmed with the original purchase invoice 2 Extended warranty period for electric engine is 60 month 3 Surety commits to fix free of charge any failures Component or production defects of the product which appear during warranty period 4 Warranty exclusions a the failures caused by the usage of the screen against the rules described in operation manual b the failures caused by improper storage or transportation c mechanical defects of the screen other than mentioned at point 3 d damages caused with overvoltage at power network e deinstallation and reinstallation of the screen 5 Avers Screens Service department will remove all defects within 21 days after receiving the demaged product 6 Warranty claims should be passed to the screen supplier dealer 11 Manufactured after 13 08 2005 This symbol on the products and or accompanying documents means that used electrical and electronic products should not be mixed with general household waste Disposing of this product correctly will help to save valuable resources and prevent any potentialnegative effects on human health and the environment which could otherwise arise from inappropriate waste handling Plea
13. or medical assistance to prevent potential visual impairment Do not expose rechargeable battery to direct contact with water avoid immersing battery in water Prevent rechargeable battery from extreme shock and casing damage Immediately stop use of rechargeable battery if any unusual symptoms happened like leakage color change deformation Liquid leaking from the rechargeable battery is highly corrosive Wash your skin or clothes with pure water in case they had any contact with liquid leaked from the rechargeable 1 1 Declaration of Conformity CE AVERS SCREENS Manufacturer s Declaration of Conformity CE AVERS Screens Sp z 0 0 Under it s own responsibility declares All screensand accessories mentioned below are manufactured in Polandaccording to the essential safety requirements of Council Directive 98 79 WE Projection screens Akustratus 2 Stratus 2 Focus Cumulus X Solar Solaris Contour Altus Cirrus CL Cirrus X Cirrus X Crank Projector mount brackets Alumount Promount SimpleMount Prolif Simliftt The above mentioned products are in conformity with the European Directives and especially with the norms PN EN 55014 1 2007 U PN EN 50082 1 1997 PN EN 60335 1 2004 PN EN 61000 3 2 2007 PN EN 61000 3 3 1997 IEC 60335 2 97 2007 2 Product specification Electrically rolled projection screen designed for fixed installation at projection systems for b
14. se contact your local authority for further details of your nearest designated Wersja 15 01 2015 collection point
15. stic cap Keep switch pressed until programming indicator located near the switch will blink red Press twice button P2 located at battery compartment of your RF remote transmitter Withint 4 seconds from pressing button P2 press button 4 at your RF remote transmitter Programming indicator will blink several times confirming remote transmitter individual code was memorized by the control unit B Erasing control unit s memory Power on screen connect battery charge battery if it was disconnected for a longer period of time before Press P2 button located at battery compartment of your RF remote transmitter once programming indicator will blink once Press STOP button at the RF remote transmitter within 4 seconds from the programing indicator blink Within next 4 seconds press again button P2 located at transmitter s battery compartment Programming indicator will blink several times confirming all data stored at control unit s memory were erased C Assigning next RF remote control transmitter This procedure must be performed in 2 steps One transmitter must be programmed at control s unit memory as primary transmitter as first step Other transmitters can be programmed as additional transmitters as second step RF remote transmitter supplied with Akustratus screen as is factory programmed as primary transmitter Repeat step 2 to program more transmitters at screen s control unit Program primary transmitter following procedure des
16. the screen casette and slide the chanel onto the ceiling brackets front hinge see Picture 7 Twist the screen casette back to the horizontal position see Picture 8 Slide locking bolts to the lock position see Picture 8 Check the screen case leveling before first unrolling the screen Do not use the screen if it is not properly installed leveled Picture 7 Screen wall installation phase 2 Picture 8 Screen wall installation phase 3 3 4 Electric installation Electric projection screen Akustratus 2 do not need permanent connection to electric power network for operation charge integrated screen s battery before first operation Connect charger s connector to the charging outlet located at screen s left plastic cap and plug charger into power outlet directly or with any power extension cord Battery charging is indicated with red color light of charging indicator When the battery is fully charged charging indicator lights permanent green Manual wall steering switch should be installed at the place meeting the following conditions a installation150 180 cm above the floor level b the screen should be visible by the wall switch operator during the screen operation c wall switch operator cannot stay in reach of any of the screen s moving parts during the screen operation d the wall switch must be visible from the each part of the room irrespective of the screen position a a A Charging indic
17. ubular engine AC Capacity 2000mAh Voltage 12V DC 40W Voltage 12V Power consumption 3 35A Type Li lon with integrated charging control unit Rotation speed 20 obr min Torque 10 Nm Max operation time 4 min Engine single cycle operation time operation cycle can be repeated in 20 minutes intervals RF remote control transmitter Dimensions 110 x 58 x 20 mm Power supply 1 x battery 12V type 23A Operating Range up to 100m at open space 3 Screen installation 3 1 Installation precautions Installation work should be carried out by a qualified technician in accordance with the instructions described below Fixed installation of the screen should be done with use of the screws and anchors suitable for the walls ceilings materials at the installation place and the genuine installation brackets delivered with the screen Check carefully after installation if the screen is perfectly leveled Do not roll out the screen not installed in horizontal position In case the screen leveling is not perfect correct the installation 3 2 Ceiling installation Appoint the location of the ceiling mount brackets fixing points Drill holes for anchors fixing the screen brackets to the ceiling Fix the ceiling brackets with anchors see picture 1 The mounting anchors diameter should be not smaller than 8 mm In case of the cartboard plaster ceiling installation use cartboard plaster dedicated 11mm diameter steel anchors wit
18. usiness presentations and or home cinema applications Screen s DC electric motor is supplied with rechargeable battery integrated inside screen casing battery have to be charged periodically Screen case made with aluminium alloy decorative elements at the screen main body available optionally in many colours but white is a standard Dustproof bottom door secure projection fabrics of rolled screen from pollutions Bottom door operate automatically during screen operation Screen can be installed at wall or at the ceiling as a standard Best picture quality can be reached when the selection of the type of projection surface and size will be optimal for the projection device projector and projection conditions at the planed installation place Built in wireless remote control system allows comfortable screen operation 2 1 Contents of packaging Please check carefully if any physical damage of the screen has not happen during transportation Inspect the package for all accessories presented below D m x2 Ss 43 lt x2 M6x20 x2 SS Screen unit x 1 Battery charger x 1 Installation brackets Installation accessories RF remote transmitter x 1 Programming wrench x 1 Operation manual x 1 2 2 Technical Data Projection fabrics characteristics Silver Professional SP a special screen dedicated polyester fiberglass fabrics double side covered with vinyl black back surface and silver front projection surface
Download Pdf Manuals
Related Search