«WAVE 2» v.1.2а User manual in brief «WAVE-2
Contents
1. WAVE 2 v 1 2a User manual in brief WAVE 2 is a low distance and compact version of WAVE 1 makes a bridge between the car and its key Answer signal to the car comes directly from the key distance can vary from 15m to 100m and depends on key type and battery condition inside the key and allows you to open a doors and start a car Mode selector One of the selector switched ON all of the others must be switched off Working mode must be switched ON in the small box CAR only big box KEY must always be switched on FIRST 1 position Position of switches 1 Automatic mode 2 New MERCEDES X166 X164 W222 etc and AUDI also 3 BMW MERCEDES 221 old ML W164 n GL W166 NISSAN INFINITY PORSCHE MAZDA RENAULT HYNDAI KIA and others 4 TOYOTA and SUBARU only both old and new models 5 RANGE ROVER LAND ROVER JAGUAR only In the first mode the device selects the working algorithm automatically Small box CAR flashes the number of times corresponding to the mode activated 1 2 3 etc and keeps selected mode within 10 seconds If within 10 seconds there were no more request signal from the car the device goes into standby mode and the green LED flashes slowly The new request signal from the car will re launch automatic mode selection If the mode on a small box CAR is selected manually big box KEY will select required mode automatically and the white LED will show the current mode Mo2. des can be switched on the fly not necessary to restart devices LEDs WHITE Indication of the algorithm indication of interference instead of queries If you change the mode the mode number YELLOW On big box KEY shows link between Permanently lit on small box CAR RED Indicates request signal from the car Once switched on the mode number GREEN blinks slowly standby mode blinks fast working mode Long RED led battery low Switch OFF and charge devices DEVICE MUST BE SWITCHED OFF WHEN CHARGING Lithium polymer battery consists of three separate cells which corresponds three indicators on the charger CU Charge until all of the three LEDs light up in green Always monitor the charging process Never leave the device connected to the charger without supervision Spontaneous combustion possible When connecting the charging is necessary to observe the correct position of the connector The device uses powerful batteries an incorrect connection of the charging lead to smoke and a possible fire hazard be careful and attentive
Download Pdf Manuals
Related Search