SatinSheet 2Direction
Contents
1. Etac we strive to improve our products all the time and therefore we reserve the right to make changes to prod ucts without prior warning All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects The information given in this manual including recom mendations combinations and sizing does not apply to special orders and modifications If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided If in doubt please contact Etac Warranty Two year warranty on material and manufac turing defects provided that the product is used correctly For further information on the Etac transfer range see www etac com The product can be scrapped in accordance with national regulations Symbols Washing Iron Handwash Do nat dryclean Wipe off Do not bleach Tumbledry Risk of sliding down Keep out of the sun User mass limit maximum rated load Never leave on the floor The product can be scrapped in accordance with national regulations Warning Read the User Manual Manufacturer Class 1 European Council Directive MDD 93 42 EEC on medical devices Batch no Lot no Intended use SatinSheet is a glide sheet that reduces friction when turning and positioning users in bed and makes work easier for the assistant SatinSheet is positioned in the bed like an ord2. friction no sliding moving Check always Manual transfer aids with handles straps and buckles Manual transfer aids for sitting and lying transfer Manual transfer aids with high or low friction The product can be AT scrapped in accordance k with national regulations Read the User Manual If in doubt please contact Etac Customer Service or local distributor for more information and guidance For more information about training and the use of these products contact the Etac transfer experts www etac com Class 1 European Council Directive MDD 93 42 EEC on medical devices Manufacture Etac Immedia A S Egeskowej 12 DK 8700 Horsens Denmark etac immedia etac com m xport ac Immedia A S geskovvej 12 K 8700 Horsens ac immedia etac com www etac com exp 0 Om m Etac Sverige AB Box 203 334 24 Anderstorp S Tel 46 371 58 73 00 Fax 46 371 58 73 90 info etac se www etac se Etac AS Pb 249 1501 Moss N Tel 47 815 69 469 Fax 47 69 27 09 11 hovedkontor etac no www etac no Etac A S Egeskowej 12 8700 Horsens DK Tel 45 79 68 58 33 Fax 45 75 68 58 40 info etac dk www etac dk Etac GMBH BahnhofstraBe 131 45770 Marl D Tel 49 236 598 710 Fax 49 236 598 6115 info etac de www etac de Etac Holland BV Fluorietweg 16a 1812RR Alkmaar NL Tel 31 72 547 04 39 Fax 431 72 547 13 05 info holland etac com www etac com R82 UK Ltd Unit D4A Coombswood Business Park East Coo
3. SatinSheet 2Direction media Instruction for Use a part of Etac IMM1024_IFU_GB Version 5 2015 Illustrations Positioning different sizes of SatinSheet 2Direction on a mattress A B C A B C 100 x 200 cm 140 x 200 cm 200 x 200 cm Illustration 1 Illustration 2 f F RS EA Fe fa NV Y pal c j T 9 ze v sies SE a A j de Illustration 3 Illustration 4 y P Fr Y d L A 7 L f j 7 M S d A A Contents Enn Page General Symbols Intended use Intended enviromeNt ee ee r 4 Practical hanalitig mace t ER ide BE tia 5 NECE 6 Articles Combinations ee uei dette let 7 Service nto matter Lee cte sde fos s dut ete tnb 8 General Thank you for choosing an Etac product To avoid accidents and injury when moving and handling the products read the manual carefully The person described as the user in this user manual is the person who is lying or sitting on the product The assistant or assistants are the people who manoeuvre the product This symbol appears alongside the text in the manual It draws the reader s attention to points at which there may be a risk to the health and safety of the user or assistant The products comply with the standards applicable for Class 1 products in the European Council Directive MDD 93 42 EEC on medical devices Lot no Batch no x x x Xx X Xx x Xx x X Production year Running number At
4. in W600 x L1400 mm W2000 x 11400 1M41225 SatinSheet 2Direction satin W600 x L2000 mm with extra width W2800 x L2000 1M41335 SatinSheet 2Direction satin W600 x L1050 mm W1950 x L1050 1M41805 SatinSheet 2Direction satin W960 x L2000 mm W2300 x L2000 Combinations SatinSheet2Direction DrawSheet ADirection In2Sheet4 Set Direction 1M41335 SatinSheet IM4116S IM4110S 2Direction IM4108S SatinSheet IM4116S IM4110S M4201S 2Direction IM4108S IM41 16S IM4119S SatinSheet M4118S IM4115S IM4110S IM42055 2Direction IM4119S IM4118S IM4113S SatinSheet M4118S IM4115S IM4110S IM42005 2Direction IM41135 1M41185 IM42045 IM41155 1M41135 IM4114S SatinSheet M4118S IM4115 M4121S IM4110S IM42025 2Direction Ed IM41145 1M41185 IM41805 SatinSheet a M4118S IM4115 M4121S 2Direction IM41075 SatinSheet M4118S IM4115 M4121S IM4110S 2Direction IM4112S SatinSheet M4118S IM4115 M4121S IM41105 IM42035 2Direction FIT IM4112S IM4115S IM4122S SatinSheet M4118S IM4115 M4121S 2Direction Double a Service Information Thank you for choosing an Etac product If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided Warranty Two year warranty on material and manufacturing defects provided that the product is used correctly Before taking a product in service always make a risk assesment according to national and or local legislati
5. inary sheet and can be combined with draw sheets or SatinSheet 4Direction The SatinSheet range comprises different models of glide sheets with low friction material and draw sheets The choice of model or combination is made with reference to the users functions and needs and the assistants working environment Intended enviroment Acute care Long term care Home care Practical handling Positioning Position SatinSheet with the low friction material upper most in the middle of the bed see Illustrations A B and C All SatinSheet models have a this side up label to help ensure that the correct side faces upwards in the bed Use A SatinSheet can be very beneficial where the user is able to turn him herself but needs to reduce friction Using SatinSheet the user can turn him herself without slid ing down in the bed even if the head end is raised see Illustration 1 If the user needs help to turn SatinSheet can be benefi cial when used with a draw sheet Illustration 2 A SatinSheet 4Direction IM4115 can be used to help move the user up and down in the bed and from one side to the other Illustration 3 Turning is achieved by grasping the sheet at the users hips and shoulders To achieve a better ergonomic grip the assistant should grasp as much fabric as possible An information label describing the correct use of the product is sewn into all SatinSheet models products Always work with flat
6. k the glide system when you have com pleted the transfer Encourage the client to assist where possible To ensure that the client feels safe and that every manual handling is smooth always plan the manual handling in If in any doubt please contact Etac advance There is a risk that the user may slide off Never leave the user alone on the edge of the bed Never leave the product on the floor Materials Polycotton 66 cotton 34 polyester Satin 10096 polyester Cleaning The product should be checked regularly preferably each Washing instructions time it is used and especially after wash Ironing improves the glide effect Do not use fabric softener Check that there is no damage to seams or fabric Never try to repair a product yourself Never use a defective product Articles Article no Description Size mm IM4107S SatinSheet 2Direction satin W650 x L2000 mm with elastic at corners W850 x L2000 1M41085 SatinSheet 2Direction satin W1950 x L1050 mm W1950 x L1050 IM4112S SatinSheet 2Direction satin W700 900 x L2000 mm FIT W900 x L2000 1M41135 SatinSheet 2Direction satin W700 x L1400 mm W2000 x L1400 1M41145 SatinSheet 2Direction satin W700 x L2000 mm W2000 x L2000 1M41175 Pillow case handles satin on one side W600 x L600 1M41195 SatinSheet 2Direction sat
7. mbswood Way Halesowen West Midlands B62 8BH UK Tel 0121 561 2222 Fax 0121 559 5437 R82uk r82 com www r82 co uk Snug Seat Inc 12801 E Independence Blvd P O Box 1739 Matthews NC 28106 US Tel 1 800 336 7684 Fax 704 882 0751 information snugseat com www snugseat com cetac Creating possibilities
8. on First inspection e sthe packaging intact e Read the label on the packaging and check the article no and product description e Check that Short Instruction is enclosed updated User Manual Instruction for use can be downloaded from www etac com or contact your Etac Customer Service or the local distributor e Check the label on the product does it include article no product description lot batch no cleaning instructions and supplier name Periodic Inspection e Make sure that your Manual transfer system always is in a perfect condition After wash always check materials stitching handles buckles e Ifthe product shows signs of wear and tear it must be removed from service immediately Lot no Batch no A F E 7 7 Production year Running number N Visual inspection Check the product Stability test I Ensure that the materials seams stitching KG Try to bend the product verify that it feels firm handles buckles are intact faultless stable and solid Mechanical load or stress Test handles Test low high friction Draw hard in the handles in opposite directions Place the product on a firm surface or a bed and control the material seams and stitching i place your hands on the material and test the Test buckles friction by pushing your hands down into the Lock the buckle and draw in opposite directions product control the buckle and the stitching Low friction slides effortlessly High
9. wrists and weight transference Turning with SatinSheet can also be done by two assis tants The assistants work together One assistant helps pull on SatinSheet while the other assistant pulls down on the mattress at the level of the users hips and shoulders pushing gently Turn the user see Illustration 2 To lock the glide system after turning Fold the excess material from the draw sheet in under the mattress on both sides of the bed Before locking the glide system under the mattress any unevenness creases should be smoothed to avoid decu bitus The assistants pull simultaneously and diagonally from both sides Notice Special features Always check the product before use and after washing Always make a risk assessment and secure that the assistive product can be used at the individual user Never use a defective product If the product shows signs and in combination with other devices that it is safe of wear and tear it must be scrapped for the user and caregivers Read these instructions carefully It is recommended that the guard rail is in place when the user is left on the glide system unless It is important that assistants receive instruction in manual a risk assessment has found that the user can be handling Etac offers advice and training for assistants For safely left on the glide system without the need of further information contact Etac guard rails Always use the correct manual handling techniques Always loc
Download Pdf Manuals
Related Search