ST201, ST401 & ST601
Contents
1. av link ST201 ST401 amp ST601 Tilt TV Wall Bracket Item ref 129 550UK 129 551UK amp 129 552UK User Manual These brackets are constructed from reinforced steel to allow a screen to be mounted on a wall safely Designed to be easily installed and supplied with all required installation hardware Model ST201 ST401 ST601 17 42 26 pes 50 32 65 Screensize Max weight load 30kg Caution Please read this manual thoroughly to avoid damage to property or personnel If unsure of any part of this manual please refer to professional installer for help e This product contains small components that could pose a choking hazard if swallowed please keep out of reach of children e This product is designed for mounting on wall studs or concrete wall Always ensure the mounting surface will be capable of withstanding the combined weight of the TV bracket and TV reinforcement may be required for aged or weak walls e Safety gear such as gloves and safety goggles must be worn during the installation A minimum of two people are required throughout the installation failure to do so may result in injury or damage e This product is design for indoor use only The bracket must be inspected at least every two months for loose joints or aged parts Contents Please check all contents listed below are included inside the box If anything is missing please return to the retailer or dealer TV Mount N2. Screen Fixing Screen Fixin Screw M4 M5 5 6 Screw M4 M5 5 6 Without Spacer With Spacer Step 3 Hook the TV bracket on to the wall mount and gently rest the TV against the wall as shown below Use a screw driver to fix the locking screw in until the TV is completely fixed to the bracket Errors and omissions excepted Copyright 2015 AVSL Group Ltd 129 550UK 129 551UK amp 129 552UK User Manual
3. Wall Bracket ya M4 25mm x 4 M5 25mm x 4 M6 25mm x 4 5 M8 25mm x 4 6 Plastic Spacer x 4 7 Washer x 8 8 Y P i I tL Wall Plug x 4 9 Fi Wall Mounting Screw x 4 10 I A Magnetic Spirit Level For this installation you will also require a pencil tape measure electric drill stud finder and a Philips cross screw driver Step 1 Fixing wall bracket For concrete wall installation first of all work out the height of the installation and ensure it is level using the spirit level Use a pencil to mark where the mounting holes will be and use an electric drill to drill a hole that is around 10mm in diameter and 50mm deep Insert the wall plugs into the holes and install the wall bracket as follows a gt x E T o Concrete Wall J ee g Wall Mounting Plug 9 j Magnetic Spirit Leveler 3 8 10mm avlink avsi con n EnA voup av link For plaster wall installation first of all find out where the wood stud is behind the wall using a stud finder Then work out the height of the installation and ensure it is level using the spirit level Use a pencil to mark where the mounting holes will be and use an electric drill to drill a hole that is around 5mm in diameter and 50mm deep Install the wall bracket as follows ps f i Magnetic Spirit t Stud Finder 2 50mm 3 16 5mm Washer 8 Plastic Spacer 7
Download Pdf Manuals
Related Search