USER MANUAL - Home Health and Fitness
Contents
1. In radio on mode to turn sleep function on Wave your hand over the IR SENSOR 16 for about 2 seconds to turn on the sleep function the sleep icon will flash in the LED display Sleep time can only be set for a maximum 90 minutes Press the SLEEP BUTTON 8 to change the sleep time as described before Press the ON OFF BUTTON 5 to cancel the sleep function 3 While the alarm is sounding to turn snooze function on Wave your hand over the IR SENSOR 16 once to activate the snooze for 9 minutes 4 in radio on mode to display the radio frequency and in door temperature Wave your hand over the IR SENSOR 16 Wave your hand over the IR SENSOR 16 to show the indoor temperature again within 1 second to show the radio frequenc a a s ail e i HjU2uUI EE RER kh te mot Wave your hand over the IR SENSOR 16 Wave your hand over the IR SENSOR 16 again within 1 second to show the ALARM1 again within 1 second to show the ALARM 2 time time 5 In radio off mode with the Display Dimmer Switch set to AUTO OFF the time display will automatically turn off in 15 seconds Use the IR Sensor to turn it on again Wave your hand over the IR SENSOR 16 to turn the display on DIMMER CONTROL The display DIMMER SWITCH 12 is located on the back of the unit Select either AUTO HIGH LOW to change the brightness of the LED DISPLAY 102. AM FM DUAL ALARM CLOCK RADIO WITH WAVE SENSOR MODEL JCR 275A CF 2 3 gt gt amp ALA 2 2 9 SARMI 9 FNE 2 Y SETS ia i i MP i M D 3 z BAND 3 TIME ZONE USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE WARNINGS WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions In the literature accompanying the appliance IMPORTANT SAFETY INSTRUCTIONS 1 Read these Instructions 2 Keep these Instructions 3 Heed all Warnings 4 Follow all Instructions 5 Do not use this apparatus near water 6 Clean only with a
3. NIGHT LIGHT The night light can be turned on or off using the LIGHT ON OFF button located on the back of the unit RESETTING THE UNIT After you have installed the backup batteries and connect the unit to an AC power source for the first time we recommend you to press the RESET Button 11 located on the bottom of the unit to correctly initialize it In case of an erroneous display or prolonged abnormal behavior during normal use you can also safely restore the unit to its factory preset condition by pressing the RESET Button 11 Please note that all personal settings including current time alarm time and sleep session will be cleared and will need to be reset so be sure to set up the clock again according to previous sections above Note In very rare instances such as an electrostatic discharge on a dry cold winter day if the unit still fails to reset after pressing the RESET Button you should unplug it from the AC power source and then remove the backup batteries from the battery compartment at the bottom of the unit for at least 10 minutes After 10 minutes reinsert the batteries plug the unit back in and press the RESET button again E 10 SPECIFICATIONS Frequency Range AM 530 1720 KHz FM 87 5 108 5 MHz AC Power Source 120V 60Hz 5W Backup Battery 1x 3V type CR2032 Lithium battery not included Clock Accuracy up to 60 seconds per month Temperature Sensor Range 32 F to 122 F 0 C to 50 C
4. the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped ys 810 00000S 190 15 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus 16 Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the mains plug should be disconnected form the mains socket outlet completely 17 Battery shall not be exposed to excessive heat such as sunshine fire or the like 18 The marking information is located at the bottom of apparatus 19 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type ZX CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF AC PLUG TO WIDE SLOT FULLY INSERT S AC Outlet AC Plug SAVE THESE INSTRUCTIONS COMPLIANCE WITH FCC REGULATIONS E 2 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonab
5. minute snooze duration during beep or radio alarm During the Snooze delay the alarm icon or amp will flash The Snooze function can be repeated within the alarm duration If you set the DISPLAY DIMMER SWITCH 12 to the Auto OFF Mode the LED DISPLAY 10 will turn off automatically after the snooze function is activated and then light again when the snooze duration has expired LISTENING TO RADIO 1 Choose between AM and FM bands by using the BAND SELECTOR BUTTON 1 2 Press the ON OFF BUTTON 5 to turn radio on 3 Rotate the TUNING CONTROL 19 to your desired radio station according to the dial scale on the unit 4 Rotate the VOLUME CONTROL 18 to adjust to the desired output level 5 To turn off the radio press the ON OFF BUTTON 5 TIPS FOR BEST RECEPTION AM The AM antenna is located inside the cabinet of the unit If AM reception is weak change the position of unit until the internal antenna picks up the strongest signal FM During FM reception always keep the FM WIRE ANTENNA 15 fully extended for best performance However if FM reception is weak try repositioning the unit until you get the best reception SLEEP TIMER OPERATIONS Setting sleep time while listening to radio 1 Press the SLEEP BUTTON 8 to activate the Sleep function The default sleep time is 90 minutes and will flash for 5 seconds unless you change it 2 Press the SLEEP BUTTON 3 repeatedly to decrease the s
6. the BUTTON 6 to change to the time zone number 1 6 as shown above that corresponds to your area 3 Press the TIME SET BUTTON 9 to confirm 2 Note Above time zones are not covering Alaska and Hawaii If you plan to use this model in these zones you can still manually set the time regardless what position of time zone switch is However time zones program above will not match the list under such setting DST DAYLIGHT SAVING TIME The DST function allows you to add one hour to the current time in Spring and subtract an hour from the current time in Fall if DST is observed in your area Press and hold DST BUTTON 2 for 3 seconds to toggle the DST function on and off A icon will appear in the top left corner of the display when adding an hour and the icon will go off when an hour is subtracted CALENDAR AND TEMPERATURE DISPLAY Selecting Calendar and Temperature display in normal time or radio mode e Press the TEMP BUTTON 6 to display the ambient indoor temperature momentarily for 5 seconds Note The temperature display is default to display Celsius readings To display Fahrenheit readings press and hold the C F BUTTON 6 to change Fahrenheit e Press the Y M D BUTTON 2 to display the current Year momentarily 5 seconds While the Year is displayed press the Y M D BUTTON 2 again to change to show the current Month and Date momentarily 5 seconds SETTING UP THE ALARMS Setting up Alarm 1 and Alar
7. CARE AND MAINTENANCE 1 Children should be supervised when using this appliance 2 Never wrap the ac power cord around any animal or person Special care should be taken with long wire 3 Clean your unit with a dry cloth Solvent or detergent should never be used 4 Avoid leaving your unit in direct sunlight or in hot humid or dusty places 5 Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors TROUBLESHOOTING GUIDE Symptom Possible Cause The Sensor has been The unit is too close to a wall or Relocate the clock radio to keep it accidentally triggered there is a barrier e g shelf a minimum 3 6 inches from a above or behind that is too close wall and make sure there is no to the clock radio barrier e g shelf above the clock radio less than the minimum 9 12 inches Noise or distorted Station not tuned properly for Retune the AM or FM broadcast sound on AM or FM AM or FM Station broadcast FM FM wire antenna is not FM Fully extend FM wire extended antenna AM The unit is not placed in AM Reposition the unit until the best reception point best reception is obtained AM or FM no sound Unit not in RADIO function Press On Off Button until radio is mode on Volume set at minimum Increase Volume An external non playing digital Unplug the Aux In cord audio player is connected to the Aux In jack Sound appears Volume
8. ce the radio on a surface with a no obstructions 9 12 inches above or 3 6 inches behind the unit This will help maximize the area for recognizing the motion of your hand and also reduce the chances of the unit false triggering If the unit begins beeping and the display functions erratically it may be either too close to an object above or behind the unit If this happens please make sure there are 9 12 inches of clearance above and 3 6 inches behind the unit to avoid the false triggering Ul gt SHELF MIN 9 12 INCHES 22 9 30 4 GM WALL ii MIN 3 6 INCHES i 7 6 15 2 CM SETTING UP THE CALENDAR AND CLOCK Setting up the Calendar and Clock in normal time or radio mode 1 Press and hold the TIME SET BUTTON 9 for 2 seconds to enter calendar setting mode 2 Press the BUTTON 2 or BUTTON 6 to increase or decrease the Year digits are flashing setting 3 Press the TIME SET BUTTON 9 to confirm and cycle through other settings as follow Normal gt Year gt Month gt Day gt 12 24H gt Hour gt Min gt Normal SETTING UP THE TIME ZONE There are 6 time zones programmed into your unit Zone 1 Newfoundland time Zone 2 Atlantic time Zone 3 Eastern time factory preset Zone 4 Central time Zone 5 Mountain time Zone 6 Pacific time 1 In standby mode press and hold the TIME ZONE BUTTON 8 until the current time zone number shows and is flashing Press the BUTTON 2 or
9. control of this unit is set Adjust Volume Control to a lower distorted at high to maximum comfortable level volume setting dim mode At Spectra environmental and social responsibility is a core value SPECT RA of our business We are dedicated to continuous implementation of b responsible initiatives with an aim to conserve and maintain the YM environment through responsible recycling Please visit us at hitp www spectraintl com green htm for more information on Spectra s green initiatives or to find a recycler in your area E 11 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U S A ONLY SPECTRA MERCHANDISING INTERNATIONAL INC warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U S A This warranty is not assignable or transferable Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof except batteries when it is returned to the SPECTRA Service Department accompanied by proof of the date of original consumer purchase such as a duplicate copy of a sales receipt You must pay all shipping charges required to ship the product to SPECTRA for warranty service If the product is repaired or replaced under warranty the return charges will be at SPECTRA s expense There are no other express warranties other than those stated h
10. dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer E 1 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long PORTABLE CART wanna symbol provided by HETAC periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into
11. ective A customer service representative may need to contact you regarding the status of your repair so please include your name address phone number and email address to expedite the process IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD please include a check for 12 00 to cover the cost of repair handling and return postage All out of warranty returns must be sent prepaid It is recommended that you contact SPECTRA first at 1 800 777 5331 or by email at custserv spectraintl com for updated information on the unit requiring service In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement SPECTRA MERCHANDISING INTERNATIONAL INC 4230 North Normandy Avenue Chicago IL60634 USA 1 800 777 5331 To register your product visit the link on the website below to enter your information http www spectraintl com wform htm 0812 Printed in China
12. erein This warranty is valid only in accordance with the conditions set forth below 1 The warranty applies to the SPECTRA product only while a It remains in the possession of the original purchaser and proof of purchase is demonstrated b It has not been subjected to accident misuse abuse improper service usage outside the descriptions and warnings covered within the user manual or non SPECTRA approved modifications c Claims are made within the warranty period 2 This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications or failure to provide reasonable care and necessary maintenance as outlined in the user manual 3 Warranty of all SPECTRA products applies to residential use only and is void when products are used ina nonresidential environment or installed outside the United States This warranty gives you specific legal rights and you may also have other rights which vary from state to state TO OBTAIN SERVICE please remove all batteries if any and pack the unit carefully and send it freight prepaid to SPECTRA at the address shown below IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above please include a proof of purchase dated cash register receipt so that we may establish your eligibility for warranty service and repair of the unit without cost Also include a note with a description explaining how the unit is def
13. ing damage or loss in the future After all we want you listening for a lifetime We Want You Listening For a Lifetime Used wisely your new sound equipment will provide a lifetime of fun and enjoyment Since hearing damage from loud noise is often undetectable until it is too late this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise Customer s Record The serial number of this product is found on its bottom You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss Model Number JCR 275A Serial Number LOCATION OF CONTROLS 191213141 L L ZS 6 Temp C F Button 12 Auto Off High Low Dimmer Switch 13 AC Power Cord 14 Temperature Sensor For indoor use POWER REQUIREMENTS This unit operates on 120V 60Hz and requires 1 x CR2032 Lithium battery not included for clock backup during power outage Do not attempt to operate the radio on any other power source You could cause damage to the unit and void your warranty REPLACING BACKUP BATTERY 1 Remove the screw from the BATTERY COMPARTMENT COVER and remove the compartment 2 Install 1 brand new CR2032 Lithium 3V battery according to the polarity markings on the BATTERY COMPARTMENT COVER 3 Replace the BATTERY COMPARTMENT COVER and tighten the sc
14. le protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment PROTECT YOUR FURNITURE This model is equipped with non skid rubber feet to prevent the product from moving when you operate the controls These feet are made from non migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture However certain types of oil based furniture polishes wood preservatives or cleaning sprays may cause the rubber feet to soften and leave
15. leep time to 60 30 15 minutes or OFF USING THE AUX IN TO LISTEN TO EXTERNAL AUDIO PLAYER You can playback your favorite music from your iPod or portable digital audio player using the Aux in function 1 Connect the headphone jack of your external device to the AUX IN JACK 17 located on the back of the unit using a stereo cord with a 3 5mm phone plug on either ends Note the stereo cord is not included 2 Press the ON OFF BUTTON 5 to turn on the radio It will automatically switch to Aux In mode when a Suitable stereo cord is correctly connected 3 Start playing your external audio device 4 Slowly increase the volume control of the unit until the desired level is obtained To avoid output sound distortion due to overloading you may need to lower the volume output of your audio device Note the stereo music from your audio device will be converted to a monaural audio output 5 Turn off your external audio device first when you finish listening 6 Then unplug the stereo cord from the AUX IN JACK 17 and normal radio reception will resume INFRARED SENSOR FUNCTION 1 In radio off mode to display indoor temperature and alarm time settings teres E Wave your hand over the IR Wave your hand over the IR Wave your hand over the IR SENSOR 16 once to show SENSOR 16 again within 1 SENSOR 16 again within 1 the indoor temperature second to show the ALARM 1 second to show the ALARM 2 time time
16. m 2 in normal time or radio mode 1 Press and hold the ALARM SET BUTTON 4 for 2 seconds to enter the alarm set mode 2 Press the BUTTON 2 or the BUTTON 6 to increase or decrease the Hour digits are flashing setting Press the TIME SET BUTTON 9 to confirm and cycle through other settings as follow Normal gt ALARM1 Hour ALARM1 Minute gt Alarm1 Weekdays ALARM 2 Hour gt ALARM 2 Minute gt Alarm 2 Weekdays gt Normal Note for Weekday Alarms 1 7 means alarm will sound from Monday to Sunday W E 1 6 means alarm will sound from Monday to Saturday only e 1 5 means alarm will sound from Monday to Friday only Changing the alarm output source 1 Press the ALARM 1 7 or ALARM 2 8 BUTTON to select the Music option 2 for wake to radio 2 Press the same button again to change to the Alarm option amp for wake to alarm 3 Press the same button again to disable the corresponding ALARM 1 or 2 Turning Off_ the Alarm The alarm or radio will sound for 30 minutes unless interrupted by pressing the corresponding ALARM 1 or ALARM 2 BUTTONS or ON OFF BUTTON 5 It will repeat the chosen alarm again at the same time on the following day according to the weekday alarm settings described above SNOOZE FUNCTION When the preset alarm time is reached the chosen alarm will sound You can momentarily stop the alarm sound for 9 minutes by using the snooze function e Press the SNOOZE BUTTON 3 for a 9
17. marks or a rubber residue on the furniture To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture DEAR JENSEN CUSTOMER Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment Now it s time to consider how you can maximize the fun and excitement your equipment offers This manufacturer and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts To establish a safe level e Start your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level e Set the dial and leave it there Taking a minute to do this now will help to prevent hear
18. rew to secure the compartment NOTE The unit will operate without a battery installed but your time and alarm settings will be lost and will have to be reset in the event of a power interruption or failure IMPORTANT Be sure that the battery is installed correctly Wrong polarity may damage the unit and void the warranty For best performance and longer operating time we recommend the use of good quality batteries AN CAUTIONS 1 Do not mix old and new batteries 2 Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries 3 Ifthe unit is not to be used for an extended period of time remove the batteries Old or leaking batteries can cause damage to the unit and may void the warranty Do not dispose of batteries in fire batteries may explode or leak Replace all the batteries at the same time no matter exhausted or not every 2 years at the same time to avoid possible battery leakage GETTING STARTED Please be sure the outlet you plug this unit into is working and provides uninterrupted power 1 Insert the plug of the AC power cord into a 120V 60Hz outlet 2 Press the RESET BUTTON 11 on the bottom of the unit with a pointed object e g a straighten paper clip to initialize After a brief self test the unit enters the clock mode at 12 00AM IMPORTANT There is a sensor located on top of the unit that picks up any movement or objects near the top or back of the unit Please be sure to pla
Download Pdf Manuals
Related Search