AT-500 AT-100 ASH TRAY SCALE
Contents
1. AWS mein Weigh Scales Inc ASH TRAY SCALE Digital Pocket Scale AT 500 User Manual AT 100 Ash Tray Scale Manual Thank you for purchasing the American Weigh Ash Tray Scale digital pocket scale Please read all operating instructions carefully before use Scales are precision instruments and should always be handled with proper care To ensure years of reliable service keep these simple tips in mind Do not exceed the scales maximum capacity Overloading your scale can permanently damage it e Avoid exposure to extreme heat or cold Scales perform best at normal room temperature If temperatures have changed dramatically recalibration may be necessary Allow your scale to warm up for 30 60 seconds before performing calibration if available e Store your scale in a clean dry location Dust dirt and moisture can accumulate on the weighing sensors and electronics causing innacuracy or malfunction e Avoid using your scale in close proximity to strong radio wave emitting devices such as computers cash registers and cordless phones e Always weigh on a flat and level surface free from vibrations and drafts The corner of a room is usually the most stable Gently apply all items to be weighed Do not drop items onto the weighing platform e Avoid dropping your scale The warranty does not cover damage due to rough treatment or overload I OPERATION Place Scale on a horizontal flat surface and remove the2. Remove the excessive load immediately UNST Use the scale in a more stable position Specifications Model AT 500 AT 100 500g 17 640z 16 080zt 100g 3 530z 3 220zt 321 5dwt 64 30dwt Resolution 0 1g 0 0050z 0 0050zt 0 01g 0 0010z 0 0010zt 0 1dwt 0 01dwt Weighing Units g oz ozt dwt g oz ct gn Calibration Weight not Included 200g 100g Platform Dimensions inches 25x15 Scale Dimensions inches 3 8x3 8x13 Power 2 x AAA Batteries included
3. metal ash tray cover before weighing 1 Press the ON OFF key 2 Wait until 0 0 or 0 00 is displayed 3 Place the object s on the weighing platform 4 Using the MODE key you can switch between weighing units Il TARE WEIGHING 1 Turn on scale as described above 2 Place the tare item such as a tray on the platform 3 Press TARE and wait until 0 0g is displayed 4 Add the net weight item Ill CALIBRATION Calibration is NOT required before first use Only calibrate if scale is not weighing properly 1 Turn the scale ON and wait for the display to show zero 2 Press and hold the CAL key until the display shows CAL Now release the key 3 The display will flash 0 0g Ensure that no weight is on the scale and press the CAL button to calibrate the zero point of the scale 4 The display will now flash the required calibration weight Place the calibration weight not included onto the center of the platform and press the CAL key once more 5 The display will show PASS Calibration is complete V TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries incorrect calibration overload or operating on an unstable surface Please keep this in mind and maintain and operate your scale properly This scale is a precise instrument and must be handled with the utmost care and caution Display Elimination of errors Err You are overloading the scale
Download Pdf Manuals
Related Search