Touchmonitor User Manual - Leadingtouch Technology Co., Ltd.
Contents
1. ouch LeadingTouch Technology Co Ltd 2 3 Touchscreen setting Adjust we Touchscreen Setting Calibration Adjust Border Adjust A 0 Flease Set Touch Mode Touch Mode Normal mod Click On Touch User can ust Click On Release object Click On Touch No Move Click On Release No Move RR Border adjust adjust screen border scale border to fit current touchscreen as touchscreen may have abnormal action caused by installation or non linear problem Touch mode Click On Touch indicates the response when your finger touches on the panel Click On Release indicates the response when your finger leaves the touchs panel Click On Touch No Move indicates the response when your finger touches on the panel can t draw line and drag Click On Release No Move indicates the response when your finger leaves the panel can t draw line and drag 2 4 Touchscreen setting Buttom www leadingtouch com 12 27 Leading ouch LeadingTouch Technology Co Ltd dh TouchScreen Setting Calibration Adjust Button Button Switch Please Set Button Switch Mode P Enable Auto Right Button Switch Auto Ranges 10 MM Auto Time 1000 Msec Explain Click SwitchTool when hold touch a while auto switch button once A Please use Switch Tool to switch button there is only input parameter Double Click Setting Ran2. ouch LeadingTouch Technology Co Ltd CHAPTER TROUBLESHOOTING If you are experiencing trouble with your touchmonitor refer to the following table If the problem persists please contact your local dealer or our service center Solutions to Common Problems Problem Suggestion s No image appears on screen Check that all the I O and power connectors are properly connected as described in Chapter 2 Make sure the pins of the connectors are not crooked or broken Test power supply by trying different cables a different wall outlet or plug another appliance into the outlet Make certain the video cable is properly connected and that it is not damaged Check for bent pins on the cable connectors Ensure that your computer and video card are properly configured Consult video card documentation Out of Range display Check to see if the resolution of your computer is higher than that of the LCD display Reconfigure the resolution of your computer to make it less than or equal tol1024x768 See Appendix A for more information on resolution OSD Power buttons don t respond See page 3 21 for OSD enable disable Image has vertical flickering line bars Use Phase to make an adjustment Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display Image is unstable and flickering Use CLOCK to make an adj
3. ouch LeadingTouch Technology Co Ltd Touch Interface Connection Note Before connecting the cables to your touchmonitor and PC be sure that the computer and touchmonitor are turned off For size lower than 22 touchmonitor including 22 AUDIO DVI VGA IN E REMOTE 232 USB OSD 1 Connect one end of the power adapter to the monitor and the other end to the connector of the power cord 2 Connect one end of either the touchscreen serial RS232 cable or the touchscreen USB cable but not both to the rear side of the computer and the other end to the LCD monitor Tighten by turning the two thumb screws clockwise to ensure proper grounding optional module USB cable does not have thumb screws 3 Connect one end of the video cable VGA or DVI but not both to the rear side of computer and the other to the LCD monitor Tighten by turning the two thumb screws clockwise to ensure proper grounding 4 Press the power button on OSD to turn the monitor power on For size larger than 26 touchmonitor including 26 REMOTE DC IN DMI GA AV tT S_VIDEO AV2 PC AUDIO AR PHONE TV OSD RS232 SB 220V AC Power 1 Connect one end of the power cable to the monitor and the other end to the connector of the power cord 2 Connect one end of either the touchscreen serial RS232 cable or the touchscreen USB cable but not both to the rear side of the computer and the other end to the LCD
4. monitor Tighten by turning the two thumb screws clockwise to ensure proper grounding optional module USB cable does not have thumb screws 3 Connect one end of the video cable VGA or DVI but not both to the rear side of computer and the other to the LCD monitor www leadingtouch com 5 2 Leading ouch LeadingTouch Technology Co Ltd Tighten by turning the two thumb screws clockwise to ensure proper grounding 4 Press the power button on OSD to turn the monitor power on Installing the Driver Software Leadingtouch TouchSystems provides driver software that allows your touchmonitor to work with your computer Drivers are located on the enclosed CD ROM for the following operating systems e Windows XP e Windows 2000 Windows Me e Windows 98 e Windows 95 e Windows NT 4 0 Additional drivers and driver information for other operating systems are available on the Leadingtouch web site at www Leadingtouch com Your Leadingtouch touchmonitor is plug and play compliant Information on the video capabilities of yourtouchmonitor is sent to your video display adapter when Windows starts If Windows detects your touchmonitor follow the instructions on the screen to install a generic plug and play monitor Refer to the appropriate section for driver installation instructions Depending upon whether you connected the serial communication cable or the USB communication cable you
5. 56 Hz 800 x 600 60 Hz 800 x 600 72 Hz 800 x 600 75 Hz XGA 1024 x 768 60 Hz 1024 x 768 70 Hz 1024 x 768 75 Hz 1024 x 768 72 Hz www leadingtouch com 24 27 Leading ouch LeadingTouch Technology Co Ltd As an example a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically Input video is also represented by the same terms XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically When the input pixels contained in the video input format match the native resolution of the panel there is a one to one correspondence of mapping of input video pixels to LCD pixels As an example the pixel in column 45 and row 26 of the input video is in column 45 and row 26 of the LCD For the case when the input video is at a lower resolution than the native resolution of the LCD the direct correspondence between the video pixels and the LCD pixels is lost The LCD controller can compute the correspondence between video pixels and LCD pixels using algorithms contained on its controller The accuracy of the algorithms determines the fidelity of conversion of video pixels to LCD pixels Poor fidelity conversion can result in artifacts in the LCD displayed image such as varying width characters www leadingtouch com 25 27 Leading ouch LeadingTouch Technology Co Ltd APPENDIX TOUCHMON
6. All rights reserved http www LeadingTouch com 2 2 Touchscreen setting iB TouchScreen Setting Calibration Adjust Button Function Sound Information Calibrate Ki Please select monitor which be used with touchscreen 3 Name RADEON 9550 Microsoft Corporation WODM gt Resolution 1152x864 Identify 1 Custom M Ei Calibration type See 4 Points CC 9 Points CC 25 Points Ce Calibrate show monitor and resolution information recognized by system Identify show monitor information to current touchscreen www leadingtouch com 9 27 Leading O uch LeadingTouch Technology Co Ltd a TouchScreen Setting Calibration Adjust Button Information Calibrate Eh Please select monitor wh sed with touchscreen GT Name NVIDIA Quadro NYS 1 ThinkPad Display Resolution 1440x900 i 1 CustamimM ay Calibration type Sie 4 Points a 9 Paints CS 25 Points DrawLine Can Custom to define custom calibration area by changing drag Left Top and Right Bottom coordinate to set calibration area keng I e Custom Calibrate Range Left Top Coordinate Rihgt Bottom Coordinate Please darg the ico to setting Please darg the ico to setting coordinate or input coordinate direct coordinate or input coordinate direct cE EJ 4 points calibration calibrate by 4 points for SAW and Infrared touc
7. ITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor Before setting up and powering on your new touchmonitor read through this manual especially Chapter 2 Installation and Chapter 3 Operation 1 To reduce the risk of electric shock follow all safety notices and never open the touchmonitor case 2 Turn off the product before cleaning 3 Your new touchmonitor is equipped with a 3 wire grounding power cord The power cord plug will only fit into a grounded outlet Do not attempt to fit the plug into an outlet that has not been configured for this purpose Do not use a damaged power cord Use only the power cord that comes with your Leadingtouch TouchSystems Touchmonitor Use of an unauthorized power cord may invalidate your warranty 4 The slots located on the sides and top of the touchmonitor case are for ventilation Do not block or insert anything inside the ventilation slots 5 It is important that your touchmonitor remains dry Do not pour liquid into or onto your touchmonitor If your touchmonitor becomes wet do not attempt to repair it yourself Care and Handling of Your Touchmonitor The following tips will help keep your touchmonitor functioning at the optimal level e To avoid risk of electric shock do not disassemble the brick supply or display unit cabinet The unit is not user serviceable Remember to unplug the display unit from the power outlet before clean
8. Leading ouch LeadingTouch Technology Co Ltd Touchmonitor User Manual Version 1 01 Copyright 2009 2010 by Leadingtouch Technology Co Ltd HuiLongGuan LongXiang industrial center ChangPing Beijing China Tel 86 51090978 http www leadingtouch com Fax 86 51090979 E mail info leadingtouch com www leadingtouch com 1 27 Leading ouch LeadingTouch Technology Co Ltd INDEX INTRODUC TION Serer E NEE E NEEE E EE E EE E 3 Down 3 TU 3 About the Product Ne 3 NT 4 Unpacking Your Touchmonitor 9 4 TOUCH Interface ONMCC HOM ER 9 lnstaline the Driver SOL W are secen pou ETER 6 RN 17 About Touchmonitor Adjustments ee 17 Using the On Screen Display OSD Menus pe 17 OSD Menu Function pt 18 PE we 20 Power Minagement Syse essa snatosacneatad cousacnncasaatadccas atasaacnetadcgunaiubcosecke 20 TROUBLESHOOTING erer E E EE IEEE OAE 22 Solutions to Common Problenmngs pe 22 IR A ERSAT EIER RL E 24 TOUCHMONITOR SAFETY ee 26 Care and Handling of Your Touchmonitor ee 26 www leadingtouch com 2 27 Leading ouch LeadingTouch Technology Co Ltd CHAPTER INTRODUCTION Product Description Congratulations on your purchase of a Leadingtouch touchmonitor Your new touchmonitor combines the reliable performance of Leadingtouch touch technology with the latest advances in LCD
9. Sound Beep On Touch Frequency 3000 HZ Duration 50 Msec Release Sound Beep On Release Frequency k Gu bi if Duration 50 Msec Beep on touch the speaker on the computer will generate voice when touch on the touchscreen Beep on release the speaker on the computer will generate voice when leave off the touchscreen 2 1 Touchscreen setting Information www leadingtouch com 14 27 Leading ouch LeadingTouch Technology Co Ltd e TouchScreen Setting Cx Calibration Adjust Information Screen Information Model Touch screen model used to calculate the size of monitor Default value according to 17 inch A screen If screen size greater than 19 inch or less than 15 inch please select correct screen model Control Card Information Model E a LeadingTouch USB Compatible Device Protoace LeadingTouch Compatible Protocol Screen information Select Click to select current touch panel size and model to amending function if mouse cursor not overlap with your finger after calibration Default size is from 3 5inch to 42 inch Custom Click to input a custom touch panel size Control Card information Indicate Control Card information Uninstall Leadingtouch drivers Enter Touchscreen Uninstall program through the following programmer 1 Click Start programmer Leadingtouch Uninstall m Leading ouch
10. aphic mode Ka Tools Enter to adjust OSD Reset sharpness dos or language OSD OSD parameter adjustment Ep OSD Time Determines how long in seconds the OSD menu waits before closing automatically after no action has been performed OSD H Position Moves the OSD position horizontally on the screen When the button is pressed the OSD control menu will move to the right side of the screen Likewise when the button is pressed the OSD control menu will move to the left side OSD V Position Moves the OSD position vertically on the screen When the button is pressed the OSD control menu will move to the top side of the screen Likewise when the button is pressed the OSD control menu will move to the lower side Reset factory settings of the image parameters Sharpness The sharpness can be adjustable Adjusts screen position under dos Selection of the OSD menu language English Chinese www leadingtouch com 19 27 Leading ouch LeadingTouch Technology Co Ltd Chinese Selection of the OSD menu language as Chinese Q Audio Selection of speaker mode KO Volume Selection of speaker volume SA Mute Selection of speaker mute mode al Exit Exit the menu e OK Yes Confirmation of a right operation J Error No Reminder of a wrong setting Preset Modes To reduce the need for adjustment for different modes the monitor has default setting modes that are most commonly used as
11. display design This combination of features creates a natural flow of information between a user and your touchmonitor Precautions Follow all warnings precautions and maintenance as recommended in this user s manual to maximize the life of your unit See Appendix B for more information on touchmonitor safety About the Product Your Touchmonitor is a TFT color display with the following features e Direct analog RGB or Digital RGB input e 16 2M color e XGA SVGA VGA VESA compatible e Auto adjustment capability e High quality full screen re scaling e Multilingual OSD menus in both languages English Chinese e Serial USB or Comb touch interface e Superior touch technology of Leadingtouch TouchS ystems e VESA flat panel monitor physical mounting interface e Cable strain reliefs for all cables For full Product Specifications refer to Appendix www leadingtouch com 3 27 Leading ouch LeadingTouch Technology Co Ltd CHAPTER INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Leadingtouch TouchSystems driver software Unpacking Your Touchmonitor Check that the following 10 items are present and in good condition Video cable Senal cable European power cable Power cable US Canada CD and Quick Install Guide Brick power supply Power cable www leadingtouch com 4 27 Leading
12. ge LU 30 Pixel Time 600 Msec Button Switch Enable Auto Right Button Switch Auto range Click effectual in 10mm area Auto time Click effectual in 1000mMsec Auto right button effects only when above two items effectual Double Click Setting Range Clicks in range of 10 mm are determined to be a touch point Time Clicks in 500 msec are determined to be a touch point If any icon or program can t open normally please drag the two rules above to right side a little 2 5 Touchscreen setting Advanced se TouchScreen Setting est Calibration Adjust Function Ey Enable Touch Advanced Function Enable Const Touch Function Range Eanble Line Continue Function Range Time C Enable Line Smooth Function Range Points www leadingtouch com 13 27 Leading ouch LeadingTouch Technology Co Ltd Enable Touch Enable or disable touch function of touch panel Advanced Function Enable Const Touch Function The range of 10 mm are determined to be a touch point Enable Line Continue Function Settings for handwriting input or drawing Range Disconnected line in range of 20mm will be amended by algorithm Time Disconnected line in range of 100msec will be amended by algorithm Enable Line Smooth Function Line can be smoothed by algorithm to insert Spoints in 15mm range 2 6 Touchscreen setting Sound e TouchScreen Setting a Information Touch
13. given in the table below If any of these display modes are detected the monitor automatically adjusts the picture size and centering When none of the mode is matched the user can store their preferred modes in the user modes The monitor is capable of storing up to 7 user modes The only condition to store as a user mode is the new display information must have 1 KHz difference for horizontal frequency or Hz for vertical frequency or the sync signal polarities are different from the default modes Default modes is as following VGA 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 75 Hz 640 x 350 70 Hz 720 x 400 70 Hz SVGA 800 x 600 56 Hz 800 x 600 60 Hz 800 x 600 72 Hz 800 x 600 75 Hz XGA 1024 x 768 60 Hz 1024 x 768 70 Hz 1024 x 768 75 Hz 1024 x 768 72 Hz Power Management System The monitor is equipped with the power management function which automatically reduces the power www leadingtouch com 20 27 Leading ouch LeadingTouch Technology Co Ltd consumption when not in use Mode PowerConsumption On lt 30W Sleep lt 4W Off lt 2W We recommend switching the monitor off when it is not In use for a long time NOTE The monitor automatically goes through the Power Management System PMS steps when it is idle To activate the monitor press any key on the keyboard or move the mouse www leadingtouch com 21 27 Leading
14. hscreens 9 points calibration calibrate by 9 points for 4W 5W and capacitive touchscreen 25 points calibration calibrate by 25 points for AW 5W and capacitive touchscreen Select 4 points 9 points 25 points or custom and click calibrate to start calibration www leadingtouch com 10 27 Leading ouch LeadingTouch Technology Co Ltd eging calibrate please touch and hold the tenget entil you litten second beep sound Of grees ESC ieey te iceminaic calibration Press the center of red point for about 2 3 seconds Don t release your finger until the red point shaft to next position or hearing beep sound Repeat for all red point to finish calibration Calibration succeed please louch seen to check result of calibration Press Esc lo Esil CSpncE3 io calibarte again tE min fo Drew Line Test ReCalibrate Space Drasel pelt oatrwl After calibration you can choose Recalibrate If mouse cursor can t overlap with your touch finger please select this item to calibrate touchscreen again DrawLine Select to enter draw line test for more details refer to next chapter Multi touch Function Touchscreen that support multi touch can test multi touch function after calibration Touch screen by two fingers at different point synchronously a solid rectangle appears in screen and indicate the current touchscreen can support multi touch www leadingtouch com 11 27 Leading
15. ing e Do not use alcohol methyl ethyl or isopropyl or any strong dissolvent Do not use thinner or benzene abrasive cleaners or compressed air e To clean the display unit cabinet use a cloth lightly dampened with a mild detergent e Avoid getting liquids inside your touchmonitor If liquid does get inside have a qualified service technician check it before you power it on again Do not wipe the screen with a cloth or sponge that could scratch the surface e To clean the touchscreen use window or glass cleaner Put the cleaner on the rag and wipe the touchscreen Never apply the cleaner directly on the touchscreen www leadingtouch com 26 27 Leading ouch LeadingTouch Technology Co Ltd www leadingtouch com 27727
16. ministration interface www leadingtouch com 7 27 Leading ouch LeadingTouch Technology Co Ltd se TouchScreenManage ax Language di Please Select Langugae English ha TouchScreen Please Choose TouchScreen No 5 USB1 CoM COM Port P Setting S Version V Pai Language can choose interface language now has two choice Chinese and English language Touchscreen All touchscreen can be recognized is shown in the box choose the right one calibrate and click Setting S to continue your setting COM Port P For serial interface touchscreen please select the right COM port for your touchscreen to continue setting Note COM interface touchscreen can t not be recognized autoly user need to select COM port manually and click Add to add touchscreen into computer as following picture shows Di TouchScreenManage TS Language di Please Select Langugae English TouchScreen Please Choose TouchScreen No 6 COM1 COM COM Port P Setting Setting S Version v ExitfE Driver version information www leadingtouch com 8 27 Leading ouch LeadingTouch Technology Co Ltd se Version Information x Leadin Tesh LeadingTouch TouchScreen Setup Program Ver 6 00 0004 for Windows 2000 P 2003 Vista Support USB amp COM interface LeadingTouch Technology Co Ltd Copyright 2006 2009
17. oF SwitchTool B Touchsetup jo Uninstall 2 Open control panel and select Leadingtouch Driver for Window delete www leadingtouch com 15 27 Leading O uch LeadingTouch Technology Co Ltd O ENR ET O Sagar E MIS Windows SB A Leadinglouch Driver for TVindors ja g er Bab Bor Bk MER Tei McAfee AntiSpyware Enterprise Module H McAfee VirusScan Enterprise re Microsoft HEI Compact Framework 1 0 SP3 Developer rei Microsoft ET Compact Framework 2 0 iP gt aro Et WRT Re cm omencle 2 D 3 Run setup program and select uninstall www leadingtouch com HEDRO KAS 9 TSME SS 2009 4 22 E Rap de B4MB 45 44MB 9 87WB eo QTMB oe armi 16 27 Leading ouch LeadingTouch Technology Co Ltd CHAPTER OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display For best performance your touchmonitor should be opera
18. should install only the serial driver or the USB driver Start installation Double click setup exe file to start installation Firstly install resource kit for driver InstallShield fizard i Leading Touch Driver for Windows requires that the following requirements be installed op pour computer prior to installing this application Click Install to begin installing these requirements Status e Pending Kernel Mode Driver Framework Version 1 7 Install Package KB 950051 Choose a installation path the default path 1s C Program files Leadingtouch www leadingtouch com 6 27 Leading ouch LeadingTouch Technology Co Ltd iz LeadingIouch Driver for Windows InstallShield Wizard EN Destination Folder Click Next bo install to this Folder or click Change to install to a different F Jer 1 Install LeadingTouch Driver For windows to C Program Files LeadingTouch InstallShield Setup Type Choose the setup type that best suits your needs Please select a setup type Al program Features will be installed Requires the most disk space Choose which program Features you want installed and where they will be installed Recommended for advanced users Installshield After installation double click LeadingTouchSetup on desktop to enter calibration program Leading ouc hSetup Introduction to driver setup and function 2 1 Touchscreen ad
19. ting in native resolution that is 1024x768 Use the Display control panel in Windows to choose 1024x768 resolution Operating in other resolutions will degrade video performance For further information please refer to Appendix A All adjustments you make to the controls are automatically memorized This feature saves you from having to reset your choices every time you unplug or power your touchmonitor off and on If there is a power failure your touchmonitor settings will not default to the factory specifications OSD Controls 5 2O Using the On Screen Display OSD Menus All adjustments are made by using the on screen display OSD menus All menu items can be selected by using the buttons LEFT or RIGHT www leadingtouch com 17 27 Leading ouch LeadingTouch Technology Co Ltd NOTE OSD menu default is enabled Control Function 1 Menu Exit Display exits the OSD menus 2 LEFT 1 Enter contrast of the OSD 2 Increase value of the adjustment item 3 Select item counter clockwise 3 RIGHT 1 Enter brightness adjustment 2 Decrease value of the adjustment item 3 Select item counter clockwise 4 Select Selects the adjustment items from the OSD menus 5 Power Switch Switches the power of the monitor OSD Menu Function To Display and Select the OSD Functions Press the Menu key to activate the OSD menu 2 Use LEFT or RIGHT to move counter clockwise through the men
20. u Press the Enter key the parameter will be highlighted when selected 3 To quit the OSD screen at any time during the operation press the Menu key If no keys are pressed for a short time period the OSD automatically disappears NOTE The OSD screen will disappear if no input activities are detected for 45 seconds Control Description Contrast Increases or decreases contrast Brightness Increases or decreases brightness Color RGB color adjustment Auto color Automatically adjust RGB color sRGB Select sRGB standard color Color Temperature In this menu you can select one of the default color temperatures 9300K 7500K 6500K 5000K 4200K User Press the OSD button Up and Down or set color values individually using the USER option To define the color values individually select the USER option You can switch between the setting options for www leadingtouch com 18 27 Leading ouch LeadingTouch Technology Co Ltd R G B red green and blue foreground using the OSD direction button Select and specify the desired value by using the OSD button W Phase Controls the vertical and horizontal fine tuning Width Q H Position Moves the screen left or right V Position Moves the screen up or down A Auto Adjust Automatically selects the optional settings for image parameters brightness contrast image position phase etc Display the current gr
21. ustment Image is scrolling Make sure the VGA signal cable or adapter is well connected www leadingtouch com 22777 Leading ouch LeadingTouch Technology Co Ltd Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display Touch doesn t work Make sure cable is securely attached at both ends www leadingtouch com 23727 Leading ouch LeadingTouch Technology Co Ltd APPENDIX NATIVE RESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best For the Leadingtouch LCD touchmonitor the native resolution is 1024 x 768 for the 15 inch size In almost all cases screen images look best when viewed at their native resolution You can lower the resolution setting of a monitor but not increase it Input Video 15 LCD 640 x 480 VGA Transforms input format to 1024 x 768 800 x 600 SVGA Transforms input format to 1024 x 768 1024 x 768 XGA Displays in Native Resolution The native resolution of an LCD is the actual number of pixels horizontally in the LCD by the number of pixels vertically in the LCD LCD resolution is usually represented by the following symbols VGA 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 75 Hz 640 x 350 70 Hz 720 x 400 70 Hz SVGA 800 x 600
Download Pdf Manuals
Related Search