Instruction Manual
Contents
1. LCD TV DVD COMBO TFIV2250DT USER S MANUAL Table of Contents Important Safety Instructions 2 UID see cecct eem tabe ALERTE 4 DISE ee tee 7 REMOTE c E 8 System CONNCGCUONS demie eod ve eddie oen eua soos eee 13 Connecang to A ds 13 Connecting to an External AV Signal Source Composite S Video 13 Connecting to an External AV Signal Source YPbPr 14 Connecting to an HDMI Signal Source 14 Contmnecung to a Po Queue Leu M reuse di 15 Connecting to an External AV Signal Source AV Output 16 Connecting to a TV Antenna sesssesssesssesseseseee ener rna nsns r narrans nnns 16 Connecting DVB T Antena seio egeat e D Rat E a ci Ead 17 IR me etm 18 Preparato 18 Video Setting EEEEEEEEEEEEEEEEEEEEEEEEEEEMM 18 AUGIO MAD QUE 20 MISC ins 21 E 21 Geometric Setting mode only 25 t O 27 TELETEXT FUNCUON Ea eo Resa Tue 282. DV Bal PUNGCUON Dents 29 DYD Playback OpGratiOl 22 5 eoe teste Pose od eode 39 USB and SD MS MMC Card Function 1 ee esee ree ee eee 44 SySte M SEUD E E 45 Genyen c RUE 52 SO SCITIGC AE ONS 53 Important Safety Instructions This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance CLASS1 Caution Laser radiation when open Do not stare into beam Caution use of any controls adjustments or procedures other than those specified herein may result in hazardous radiation exposure Caution 1 The product contains a low power device In order to ensure the safety of the laser device do not remove any cover and attempt to repair the unit If any service is needed please contact the distributor or its authorised service centre 2 To reduce the risk of electric shock do not remove the cover back No user serviceable parts inside Refer servicing to qualified service personnel Unplug the product from the wall outlet before servicing or when it is unused for a long period of time 3 The manufacturer will not be held responsible for the damage caused by any substitutions and modification of the product without authorisation from the manufacturer
3. or User Note Color Temp R Color Temp G and Color Temp B are only available when Load From is set to User 26 NICAM Function The unit support NICAM function under TV mode Under NICAM TV broadcast 1 When receiving stereo audio signals press the STEREO AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will show the corresponding display as shown below Nicam Stereo Mono 2 When receiving bilingual audio signals press the STEREO AUDIO button on the remote control repeatedly to shift the sound tracks among Nicam I Nicam Il and Mono and the screen will show the corresponding display as shown below Nicam Nicam Il Nicam 1 1 Mono 3 When receiving mono audio signals press the STEREO button on the remote control repeatedly to shift the sound tracks between Nicam Mono and Mono and the screen will show the corresponding display as shown below Nicam Mono Mono Under A2 TV broadcast 1 When receiving stereo audio signals press the STEREO button on the remote control repeatedly to shift the sound tracks between Stereo and Mono and the screen will show the corresponding display as shown below Stereo 2 When receiving bilingual audio signals press the STEREO button on the remote control repeatedly to shift the sound tracks between and Il and the screen will show the corresponding display as shown below gt GENS gt
4. A V direction buttons to select the desired item Press the SETUP button to return to the previous menu Press AUDIO EXIT button to exit 30 DVB T Functions 1 Change Pin Code 2 CensorShip Select Change Pin Code and press the OK button to enter The screen will display as shown on the left Use the number buttons to input the old pin code The default pin code is 888888 User the direction buttons and the number buttons to enter the new code Press the OK button to confirm Select CensorShip and press the OK button to enter the setup Press the direction button to display the different options Press the A W buttons to select the desired item Press the OK button to confirm AN Setting Press the A V button to select A V Setting press the OK button to enter the A V Setting menu the screen will display as below A V Setting Factory Setting In the menu press the direction button to display different TV shape ratio and press the A V direction buttons to select desired item Press the OK button to confirm Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit Press the A V buttons to select Factory Setting press the OK button to enter the Factory Setting menu the screen will display as below In the menu press the A V direction buttons to select the desired item Press the SETUP button to return to the previous menu Press the AUDIO
5. Preparation 1 After connection press the POWER button to turn on the unit 2 Press the INPUT button on the remote control or the SOURCE button on the TV set repeatedly to select TV mode Then you can go on with the following setup Video Setting Press the MENU button once to enter the main setup menu Press the 4 gt button to mne select Video and the screen will display as Brightness shown on the right Saturation Press the OK or W button to enter the Video setting menu Press the A V button to select olm Middk an item Advanced Picture Adjust amp Press the EXIT button to exit the menu Note the items in the Video Setting menu can be set when there is signal input Contrast Press the A V button to select Contrast and press the lt P button to adjust the value Press the MENU button to return to the previous menu Brightness Press the A V button to select Brightness and press the 4 gt button to adjust the value Press the MENU button to return to the previous menu Saturation Press the A W button to select Saturation and press the 4 gt button to adjust the value Press the MENU button to return to the previous menu Hue Press the A WV button to select Hue and press the 4 gt button to adjust the value Press the MENU button to return to the previous menu NOTE This item is only available under NTSC TV signal mode 18 TV Function Sharpness Press the A V button to select Sharpness and
6. direction buttons to select Once Daily or Weekly Press the OK button to confirm and return 4 Start Time Select Start Time and use the number buttons to enter the start time 5 Start date Select Start date and use the number buttons to enter the start date 6 Duration Select Duration and use the number buttons to enter the duration 7 Status Select Status and press the direction button to enter Press the V direction buttons to select ON to book this program or select OFF to cancel Press the OK button to confirm your selection NOTE The items in the Event List page are only available when Status is set to ON Channel Setting Press the SETUP button to enter the setup menu Press the direction buttons to select Channel Setting and press the OK button to enter the screen will display as below In the menu press the A V direction buttons to select the desire items Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit 33 DVB T Functions Channel Search Press the A V button to select Channel Search in the Channel Setting menu press the OK button to enter the Channel Search menu the screen will display as below In the menu press the A V direction buttons to select desire item Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit 1 Search Type Select Search Type and press the direction button t
7. lt gt direction buttons to adjust the level Press the OK button again to confirm setting and return Press the A V direction buttons to select Contrast Press the OK button to enter the setup Use the lt gt direction buttons to adjust the level 4 Press the OK button again to confirm setting and return Select DivX VOD press the OK button to enter the menu as shown 2Mideo SatupPage Oualtvy VOD CH Go Divs Regestraion Code Note Your registration code is XXXXXX Use this code to register with the DivX R video On Demand Service This will allow you to rent and purchase videos using the DivX R Video On Demand format To learn more go to www divx com vod 49 DVD System Setup Preference Setup Press the SETUP button to enter the General setup menu then use the 4 P direction buttons to select Preference Page the screen will display as the below Pralerence Page ENG Ene Qn On the menu Use the A V direction buttons to select the desired item Press the OK button to enter the item Press the 4 button to return Goa Preleranca Page Audio Preterence Page 1 Press the A V direction buttons to select Audio ENG Audio Sao 2 Press the OK button to enter the setup Deleni hinese Press the A V direction buttons to select audio is language lussimn 4 Press the OK button again to confirm setting is and return Fre gprraa
8. m rier z a I After connection turn on the unit and the PC Press the INPUT button on the remote control or the SOURCE button on the TV set to select VGA mode 15 Svstem Connections Connecting to an External Signal Source AV Output Use the AV cables to connect the external AV input device to the AV output jacks on the side panel of the unit Note the unit can output TV COMPOSITE and S Video signals After connection turn on the power to the television and the external AV signal source Use the INPUT button on the remote control or the SOURCE button on the TV set to select corresponding mode Connecting to TV Antenna Connect TV signal source from the aerial to the antenna socket on the rear nanel of the unit TV SIGNAL INPUT After connection turn on the power of the unit Then press the INPUT button on the remote control or the SOURCE button on the TV set to select TV mode and conduct program selection 16 Svstem Connections Connecting to DVB T Antenna Connect the DVB T antenna to the DVB T input Jacks on the rear panel of the unit TV SIGNAL INPUT COMPONENT IN 4 al lop lt 8 Ld E Afa After connection turn on the power to the unit Then press the INPUT button on the remote control or the SOURCE button on the TV set to select DVB mode 17 TV Function NOTE In other mode you can refer to the following instructions in TV mode to go on with some settings
9. press the lt gt button to enter the menu as shown within the menu press the 4 gt button to adjust the value Press the MENU button to return to the previous menu Colour Temperature Press the A V button to select Color Temperature and press the 4 gt button to select Middle Cool or Warm Press the MENU button to return to the previous menu Advanced Picture Adjust Press the A V button to select Advanced Picture Adjust Press the OK or button to DNE enter the setup as show on the right In the menu press the V button to select Flash Tone desired items Press the 4 button to enter Adaptive Luma Control the setup Press the EXIT button to exit the menu DNR Digital Noise Reduction Press the V button to select DNR and press the 4 button to select Low Middle Strong or Off Press the MENU button to return to the previous menu Black Level Extender Press the A V button to select Black Level Extender and press the 4 gt button to select or Off Press the MENU button to return to the previous menu CTI Color Transient Intensity Press the A V button to select CTI and press the gt button to select On or Off Press the MENU button to return to the previous menu Flesh Tone Press the A button to select Flesh Tone and press the 4 button to select On or Off Press the MENU button to return to the previous menu Adaptive Luma Control Press the A V button to select Adaptive Luma Control a
10. the reading mode The screen displays the root menu Use the A buttons to select desired item and press the OK button to play Stop During playback press the B STOP button to stop playback and return to root menu and press gt PLAY button to play the file from the beginning Pause During playback press the PAUSE button once to pause the playback and press the P PLAY button to resume normal playback Previous and Next pi Press the button to go the previous file press the button to play the next file Fast Playback During playback press the 4 9 button to activate fast backward or forward playback During fast playback press the PLAY button to resume normal playback Repeat During playback press the REPEAT TVR button repeatedly to select repeat mode 43 USB and SD MS MMC Card Function Preparation In DVD mode connect USB device to the USB port or insert SD MS MMC card into the SD MS MMC card slot on the right side of the unit Make sure that files are stored in the USB and SD MS MMC card before connection 1 Press the CARD AUDIO button to shift between Disc playback USB playback and SD MS MMC playback The default state is disc playback Please see the figure below 00 00 00 00 001 002 BAK JPEG 2 Press the A V buttons to select the folder Press the OK button to enter 3 Press the A V buttons to select the desired track Then press the PLAY button to start playb
11. up or name down the searched channel Channel list Press the SETUP button to enter the setup menu Press the 4 gt direction buttons to select Channel List and press the OK button to enter the screen will display as below For the first time setting you should search programs and add them into the channel list Lisi T In this menu press the A V button to select the desired program and press the OK button to play Press the red button on the remote control to select TV channel list or Radio program list Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit Within this menu press the A V direction buttons to select desired item Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit 35 DVB T Functions Add a Channel Select Add and press the OK button to enter The screen will display as shown Press the direction buttons to select desired items press the button to enter or use the number buttons to input press the yellow button to open the softboard and press the direction buttons to select character or number press the 4 direction button to remove the incorrect input press the OK button to confirm your input press the SETUP button to return In the channel list the added program will be displayed with the name and Index LT new program Modify Select Modify and press the OK button to enter Use
12. Aucdcso Language Subtitle SS Tana 1 Press the A V direction buttons to select nid Subtitle 2 Press the OK button to enter the setup VIRES ee 3 Press the A V direction buttons to select Subtitle language 4 Press the OK button again to confirm setting and return Fretereo L angunga 51 DVD System Setup Disc Menu Prelerente Pags 1 Press the A V direction buttons to select Disc Sibi 2 Mee Menu Dine Manu ENG Spa 2 Press the OK button to enter the setup spine Hay 3 Press the A V direction buttons to select Menu language 4 Press the OK button again to confirm the setting and return Engpuisn Freferrea Menu Language Default 2szPnelarence Pags 1 Press the A VW direction buttons to select Default 2 Press the OK button to select Reset 3 Press the OK button all the settings will return to the default status Disc Menu EHI nasal Load Factory Setting 51 Troubleshootinc Take steps described in the tables below to solve simple problems before contacting customer service If you suspect something wrong with this unit immediately turn the power off and disconnect the power connector from the unit Never try to repair the unit yourself because it is dangerous to do SO SYMPTOM CHECK ITEM There is no display on the Make sure the unit is turned on and all connections screen correct Make sure the unit is turned on and all connections are correct The
13. EXIT button to exit 31 DVB T Functions 1 Restore Default Select Restore Default and press the OK button to display the confirm information on the screen Press the OK button to reset all the settings to the default status Press the AUDIO EXIT button to exit 2 Clear Channels Select Clear Channels and press the OK button to display the confirm information on the screen Press the OK button to clear all the channels Press the AUDIO EXIT button to exit Booking List Press the V button to select Booking List and press the OK button to enter the menu as shown below Booking Miem In the menu press the OK button to enter the Event List as shown below Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit IET In the menu press the A V direction buttons to select the desired items Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit 1 Event Id Select Event Id and press the P direction button to enter Press the A V direction buttons to select the desired item Press the OK button to confirm and return 32 DVB T Functions 2 Service Select Service and press the OK button to enter the Select Service menu Press the A V direction buttons to select the desired item Press the OK button to confirm and return 3 Event Type Select Event Type and press the direction button to enter Press the A V
14. Gi 3 When receiving mono audio signals press the STEREO button on the remote control to display sound track Mono on the screen Mono 26 TELETEXT Function Teletext is an optional function therefore only the sets with the teletext system can receive the teletext broadcast Teletext is a free service broadcast by most TV stations which provides up to the minute information on news weather television programs stock prices and many other topics The teletext decoder of this TV can support the SIMPLE and FASTEXT systems SIMPLE standard teletext consists of a number of pages which are selected by directly entering the corresponding page number FASTEXT is a more modern method allowing quick and easy selection of teletext information Because the teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button on the remote control 1 Red Green button Press to select the red green option 2 button Press this button to enter or exit teletext 3 button Press this button to enter or exit the UM E e Berea oi AUCI teletext display mixed mode 5 4 button Press this button to display the index page 5 button Press this button once to display the concealed information such as solution of riddlesor puzzles press again to remove the riddles answers from the display 6 Yell
15. Press the A V button to select Auto Adjust and press the 4 button or OK to auto setting Phase Press the A V button to select Phase and press 4 gt button to adjust the value Manual Clock Press the A V button to select Manual Clock and press the 4 gt button to adjust the value 25 TV Function Display Adjustment Press the A V button to select Display Adjustment Press the OK or button to enter the menu as shown on the right In the menu press the A V button to select H Position or V Position and press the lt gt button to adjust the value Press the MENU button to return to the previous menu Press the EXIT button to exit Color Temperature Press the A V button to select Color Temperature Press the OK or button to enter the menu as shown on the right In the menu press the A V button to select items Press the MENU button to return to the previous menu Press the EXIT button to exit Color Temp R v Position Color Temp Color Tang G Calor Tama B Press the A V button to select Color Temp and press the 4 gt button to adjust the value Color Temp G Press the A V button to select Color Temp G and press the 4 gt button to adjust the value Color Temp B Press the A V button to select Color Temp B and press the 4 gt button to adjust the value Load From Press the A V button to select Load From and press the 4 gt button to select Middle Warm Cool
16. ST button In VGA mode press to start auto adjusting In DVB mode press th display the information about the current program Remote Control 15 16 17 18 19 20 II PAUSE button In DVD mode press to pause the playback press the PLAY button to resume normal playback gt PLAY button In DVD mode press to play the disc button In teletext TV mode they are colour buttons In the setup menu use the red button to swap program and the green button to insert program in TV mode Please see P23 for details In DVB mode they re operation indicator buttons In DVD mode press to search fast forward or backward MENU EPG button In TV Composite or S Video mode press to display or close the teletext In DVB mode press the display the EPG Electronic Program Guide In DVD mode press to enter or exit the disc menu SETUP button In TV mode press to display or close the teletext display mixed In DVB or DVD mode press to enter or exit the DVB or DVD setup menu TITLE TEXT button In teletext TV mode press to display the index page In DVB mode press to display the teletext In DVD mode during a DVD disc playback press to enter or exit the title menu if the disc contains 21 22 23 24 25 26 AUDIO EXIT button In teletext TV mode press once to display the concealed information such as solution of riddles or puzzles press again to remove the riddle
17. System Setup OSD Lang Setup Page V Displas N ark I OSD Lang ENG English Can fuz S21 OSC Language Captions Setup Paga Lilosed Caption Screen Saver Setup Paga Display Mari OSD Lang Captian Screen Saver On Dn ist rq Sayn Last Memory Setup Paga Breen Save mal y m Set Last Mamory State C2 C2 4 Press the A V direction buttons to select OSD Lang Press the OK button to enter the setup Use the A V direction buttons to select items Press the OK button again to confirm selection and return Press the A V direction buttons to select Captions Press the OK button to enter the setup Use the A V direction buttons to select items Press the OK button again to confirm selection and return Press the A V direction buttons to select Screen Saver Press the OK button to enter the setup Use the A V direction buttons to select On or Off Press the OK button again to confirm selection and to return Press the A V direction buttons to select Last Memory Press the OK button to enter the setup Use the A V direction buttons to select On or Off Press the OK button again to confirm selection and return 46 DVD System Setup Audio Setup Page Press the SETUP button to enter t
18. ack 4 Press the STOP button to stop playback Press the 4 button to return to the folder menu Note The screen display will vary from disc to disc Pull out the USB or SD MS MMC card directly after the files are played The unit will now return to disc playback mode 44 DVD System Setup Preparation 1 In DVD mode press the SETUP button to enter the DVD setup menu 2 Press the button to select setup menu 3 Press the SETUP button again to exit DVD setup menu General Setup Page Press the SETUP button to enter the General Setup Page The screen will display as below Setup Paga Angie M m Dr On the menu use the A V direction buttons to S select the desired item Press the OK button to enter the item Press the 4 button to return TV Display General Setup Page TV Display PS 4 3JPs 1 Press the A V direction buttons to select TV ea Display Capone Wide Squeez 2 Press the OK button to enter the setup GRUSS OE 3 Use the A V direction buttons to select items 4 Press the OK button again to confirm selection and return sat TV Display Mode Angle Mark General Setup Paga Ns m Press the A V direction buttons to select Angle Angie Mark On On Mark nent sh 2 2 Press the OK button to enter the setup 3 Use the A V direction buttons to select On or Off 4 Press the OK button again to confirm selection Sat Angle Mark and return 45 DVD
19. arching Remote Control Remote Control Drawing 09 Tu De ECT EET CARS JHE GEH E BR 22 ry Pi MEF BL Ar Ci L 24 o O O o O O O00 FETARE Tiii 8 E mo 27 9 2H MUTT 19 2 a 25 FOL DH w 2 o ther yaplan Y t Lll IR T AUN 14 d 19 21 1 POWER button Press to enter or exit the standby mode 2 TV button Press to enter TV mode 10 11 12 13 14 DVD button Press to enter DVD mode ASPECT button Press to select the picture size choose from Auto Full and 4 3 SLEEP button Press repeatedly to select the sleep time and Off 0 9 Number buttons Press to select numbers CO button In TV mode press to return to the channel last viewed PICTURE button Press to select the video display mode choose from User Cinema Normal Vivid and Hi Bright VOL button Press to increase or decrease the volume MUTE button Press to turn on or off the speaker output INPUT button Press repeatedly to select the input source choose from TV Composite S Video YPbPr VGA HDMI DVD and DVB Direction buttons A V 4 In the setup menu press the A V button to select the desired items press the lt gt button to adjust or set OK button Press to confirm selection in setup menu In DVB mode press to display the channel list AUTO ADJU
20. buttons to select Delete Press the OK button to display the confirm information on the screen Press the OK button to delete the channel and the AUDIO EXIT button to exit System Info Press the SETUP button to enter the setup menu Press the lt gt direction buttons to select System Info and press the OK button to enter the screen will display as below In the menu press the A V direction buttons to select the desired item Press the OK button to enter Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit Note System information will change after firmware updates 37 DVB T Functions EPG Press the SETUP button to enter the setup menu Press the 4 buttons to select EPG and press the OK button to enter the screen will display as below Exit Use the A V button to select the channel press the OK button to book the channel press the AUDIO EXIT button to return 38 DVD Plavback Operation Preparation 1 Connect the unit to the power supply and press the POWER button to turn on the unit 2 Press the INPUT button on the remote control or the SOURCE button on the TV set to select DVD mode and press the OK button to enter 3 Gently insert the disc with the label side toward the front of the television into the disc tray slot until about half of the disc is in the tray and then the disc will drawn into the disc tray and loaded automat
21. ction Menu Normally there is a selecting menu for DVD discs You can press the MENU button under DVD mode to enter the disc menu and use the direction buttons to highlight an item Then press the OK button to confirm Title amp Chapter Normally there are several titles in a DVD disc and several chapters sections in a title You can select any title or chapter quickly by entering the relevant number e Some discs do not support the function by inputting the number buttons but the A V 4 direction buttons Language Audio There can be up to 8 audio languages on a DVD disc When you play a multi language DVD disc you can press the AUDIO EXIT button on the remote control to select a language Subtitle The DVD player can support multiple kinds of subtitles When you play a multi subtitle disc you can press the SUBTITLE button on the remote control to select different subtitles e Some discs do not support the shifting subtitle function Various Camera Angles The movies on some disc have been recorded from various camera positions which make you enjoy the same scene form different perspectives When playing a disc containing various camera angle the camera symbol appears on the screen Press the ANGLE AUDIO button repeatedly until the desired perspective is shown The picture will be adjusted in 1 2 seconds e Some discs do not support this function 40 DVD Plavback Operation CD Playback The player will play all track
22. e Setting press the OK button to enter the menu as shown below In the menu press the A V direction buttons to select the desired item Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit 1 TimeZone Setting Select TimeZone Setting and press the OK button to enter Press the direction button to display different options Press the A W direction buttons to select the desired item Press the OK button to confirm and return 29 DVB T Functions 2 Banner Time Setting Select Banner Time Setting and press the OK button to enter Press the direction button to display different options Press the A V direction buttons to select the desired item Press the OK button to confirm Language Setting Press the A V button to select Language Setting press the OK button to enter the menu as shown below In the menu press the direction button to display a different menu languages and press the A buttons to select the desired language Press the OK button to confirm Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit Parental Setting Press the A V button to select Parental Setting press the OK button to enter the screen will display as below Use the number buttons to enter the correct pin code and press the OK button to confirm The default pin code is 888888 The screen will display the menu as shown below Within the menu press the
23. figure 1 Antenna Socket Connect external TV or DVB T signal source 2 Composite AV Output Jacks Connect to output the audio video signals in composite mode 3 VIDEO S VIDEO and L R audio Input Jacks Connect an audio and video S Video signal in Composite S Video mode Video and S Video share L R audio jacks and S Video is the priority 4 Y Pr Cr Pb Cb and L R audio Input Jacks Connect Y Pr Cr Pb Cb signal source in YPbPr mode 5 Power Supply Cord Connect the power supply 6 VGA Input Jack Connect a VGA signal source in VGA mode 7 HDMI Jack Connect an HDMI signal source Disc Information Discs Supported DISCLOGO CONTENTS se p wanna Te MAXIMUM TIME 133min 133min SS SL SL Audio Video 242min SS DL pe EE active picture 484min DS DL PACT MISE Audio 12cm 74min DIGITAL AUDIO Operating systems and features of individual DVD discs is specified by the software maker Please refer to the instructions accompanying the disc Disc Terms Titles A DVD disc is often divided into TITLES A title can be a separate item or a segment of a film on many disc the ROOT menu and the TITLE menu are the same Chapters Each TITLE is subdivided into CHAPTERS and each chapter is numbered for easy searching So by knowing the right command you can play the whole disc or any part of the disc Tracks Picture and music CDs are divided into TRACKS Each track is numbered for se
24. he General setup menu then use the lt P direction buttons to select Audio Setup Page the screen will display as shown below Setup Page HDCD On the menu Use the A V direction buttons to select the desired item Press the OK button to enter the item Press the 4 button to return Go Audi Setup Page Dolby Digital Setup Dalby Digital Page lt 1 Press A V direction buttons to select Hong STA cmm Dolby Digital POMA 2 Press the OK button to enter the setup Use the A V direction buttons to select items 4 Press the OK button to enter the setup Press the lt button to return C2 Monod 1 1 5o0tup Dual Mono Dalby Digital Page l 1 Press the A V direction buttons to select Duni Hong STA Dual Mono 2 Press the OK button to enter the setup Use the A Wdirection buttons to select items 4 Press the OK button again to confirm selection and return C2 Dual Monai Te 1 Dynamic cooper Fags 1 Press the A VW direction buttons to select STR 27 Dynamic 2 Press the OK button to enter Use the A Wdirection buttons to adjust 4 Press the OK button again to confirm setting and return 5 Press the 4 button to return IT E3 T E3 TI TE za al DH OH 47 DVD System Setup HDCD Setup In the Audio Setup Page use the A V direction buttons
25. ically 4 Press the EJECT button to eject the disc but the disc can not be drawn into the disc tray by pressing EJECT button again Please push the disc until it can be drawn into the disc tray automatically Warning Use of poor quality discs could result in damage to the television DVD Playback Region Code DVD players and discs are coded by region These regional codes must match the played discs If the codes don t match the disc cannot be played This player s default code is region 4 Play Press the PLAY button to start playback Stop During playback press the STOP button once to stop playback and press the PLAY button to resume normal playback Press the STOP button twice to stop playback completely Pause During playback press the PAUSE button once to pause the playback press it repeatedly to start step by step playback Press the PLAY button to resume normal playback 39 DVD Plavback Operation Previous Next Press the button to go to the next chapter Press the 4 button once to return to the beginning of the current chapter or track press it twice to go to the previous chapter or track Fast Playback During playback press the button to activate fast forward or backward playback During fast playback press the PLAY button to resume normal playback Repeat Use the REPEAT TVR button repeatedly to repeat a chapter title or all e Some discs do not support the repeat fun
26. ll be stored automatically and it will return to the first searched channel During searching press the MENU button to stop searching and return to the previous menu Manual Scan Press the A W button to select Manual Scan Press the OK or button to enter the manual scan menu as shown right Press the A V button to select PR Start or Start From Press the lt gt button to set the start program number or the start frequency Select Start Search and press the OK button to begin searching When a program is searched it will stop searching automatically Press the MENU button to store and return Update Search When some program is deleted you can use Update Search to search it again Press the A V button to select Update Search Press the or OK button to start update searching and the search progress will display on the screen as below Press the MENU button to stop searching and store the searched program to the channel list 22 TV Function Program Edit Press the A V button to select Program Edit press the OK button to enter the menu as shown Use the four colour buttons on the remote control to swap insert copy or delete program Use the A V buttons to select a program you want to swap insert copy or delete Press a colour button you want and use the A V button to select the program you want to swap to insert before or copy to Press the OK button to confirm In the menu Press the V button t
27. m setup menu 31 EXIT button Press to exit the system setup menu e 32 B STOP button e In DVD mode press once to stop playback and then press the PLAY button to resume normal playback Press this button twice repeatedly to stop completely 33 4 EJECT button In DVD mode press to eject the disc es 34 M button In teletext TV mode they are colour buttons In TV Program Edit menu use the yellow ET 36 button to copy program and the blue button 5 to delete program in TV mode Please see P23 for details In DVB mode they re operation indicator buttons In DVD mode press to skip to the previous or next chapter track For some discs press the kd button once to skip to the beginning of the current chapter track Li d 20 ED v press twice repeatedly to skip to the previous chapter track 10 Remote Control Remote Control Drawing 35 SUBTITLE button 1 a In teletext TV mode press to hold the ee M current page and press again to resume 2 GEB GN NE 22 In DVB mode press to select desired 3 ASPECT SLEEP mro ed 4 am amm m ES subtitle language during a multiple subtitle 5 25 languages program playback a amp In DVD mode press to select different a 28 subtitle languages during a multiple language DVD disc playback o 36 REPEAT TVR button Inteletext TV mode press the button first 26 time to d
28. nd Notes e Do not point bright lights directly at the remote control sensor e Do not place objects between the remote e Under normal use the battery will last for control unit and the remote control sensor six months e Do use this remote control unit while e out battery when the remote is not in simultaneously operating the remote use for a long time control unit of any other equipment 12 Svstem Connections e Do not connect the power cord until all other connections have been made Ensure that you observe the colour cord when connecting audio and video cables e Before connecting open the cover on the right side of the unit s rear panel Connecting to Power Supply Plug the power supply cord to the wall AC outlet To Wall AC Outlet Connecting to an External AV Signal Source Composite S Video Use audio cables to connect an external signal source to the audio input jacks on the jack panel of the unit Use either composite video or S Video cables for the video connection to the input jack on the jack panel of the unit After connection turn on the power of the unit and the external AV signal source Press the INPUT button on the remote control or the SOURCE button on the TV set to select the Composite or S video mode Note S Video signals typically provide better image quality than composite video signals 13 Svstem Connections Connecting to an External AV Signal Sou
29. nd press the 4 gt button to select On or Off Press the MENU button to return to the previous menu 19 TV Function Audio Setting Press the MENU button once to enter the main setup menu Press the 4 gt button to Bass select Audio and the screen will display as Treble the figured right OMM In the menu press the OK or button to Surround Reverh enter the menu Press the A V button to select desired items Press the EXIT button to exit the menu Note the items in the Audio Setting menu can be set when there is signal input Bass Press the V button to select Bass and press the lt P button to adjust the level Press the MENU button to return to the previous menu Treble Press the A V button to select Treble and press the 4 button to adjust the level Press the MENU button to return to the previous menu Balance Press the A V button to select Balance and press the 4 button to adjust the level Press the MENU button to return to the previous menu Surround Press the V button to select Surround and press the 4 button to select On or Off Press the MENU button to return to the previous menu Reverb Press the A V button to select Reverb and press the lt P button to select Concert Living Room Hall Arena or Off Press the MENU button to return to the previous menu 20 TV Function Misc Setting Press the MENU button once to enter the main setup menu Press the 4 button to select Misc a
30. nd the screen will display as the figure right In the menu press the OK or V button to enter the menu Press the A V button to select item Press the EXIT button to exit the menu Language Language English Blue Mute On Default E Press the A V button to select Language Press the 4 gt button to select the desired language Press the MENU button to return to the previous menu Blue Mute Press the A V button to select Blue Mute Press the 4 P button to select On or Off Press the MENU button to return to the previous menu Default Press the A V button to select Default Press the OK or button all the settings will return to their original default status TV Setting Press the MENU button once to enter the main setup menu Press the 4 gt button to select TV and the screen will display as the right figure In the menu press the OK or button to enter the menu Press the V button to select item Press the MENU button to return to the previous menu Press the EXIT button to exit the menu Region Selection Searching Manual Scan Search Program Edit 21 TV Function Region Selection Press the A V button to select Region Selection Press the 4 button to select the desired region Searching Press the A V button to select Searching Press the OK or button to start auto searching and the screen will display When auto searching is over all searched programs wi
31. o enter Press the A V direction buttons to select Auto Scan or Manual Scan and press the OK button to confirm 2 Channel No Select Channel No and use the number buttons to input the channel number Press the direction buttons to remove the incorrect input Note this item is only available when Search Type is set to Manual Scan 3 BandWidth Select BandWidth and press the gt direction button to enter Press the A V direction buttons to select the proper one and press the OK button to confirm 4 Encrypted Select Encrypted and press the direction button to enter Press the A V direction buttons to select the proper one and press OK button to confirm 5 Update Mode Select Update Mode and press the direction button to enter Press the A W direction buttons to select the desired item and press OK button to confirm 6 Start Search After setting the items above use the A V direction buttons to highlight the Start Search and press the OK button to start searching During searching press the SETUP button to stop searching and return 34 DVB T Functions Sort Channel Press the A V button to select Sort Channel in the Channel Setting menu press the OK button to enter the menu as shown below In the menu press the A V buttons to select the desired item and press the OK button to confirm Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit This item is used to name
32. o select the program you want to edit and press the OK button to enter the edit menu Press the lt gt button to go to the previous next page of the program list Press the EXIT button to exit the menu Program Edit Menu In the menu Press the A W button to select Press the MENU button to return to the previous menu Press the EXIT button to exit the menu PR Name In the program Edit Menu press the A V button to select PR Name and press the OK button to enter the channel name edit menu See the figure on the right 1 uivwixY zwe Uuivwixivizisioie 24 ria BBBBEHBBEBM s Ix zi rli i7 7 TV Function In the menu 24 press the A 4 gt buttons to select characters or numbers and press the OK button to confirm You can enter 6 characters at most After entering characters select Cancel and press the OK button to cancel select OK and press OK button to confirm Press the EXIT button to return to the previous menu Sound System In the program Edit Menu press the A V button to select Sound System Press the 4 gt button to select the desired item Frequency In the program Edit Menu press the A V button to select Frequency Press the 4 gt button to select frequency forward or backward and press the OK butt
33. on to confirm Fine Tuning When the effect of the picture and the accompanied sound are not in the best you can setup the fine tuning to improve In the program Edit Menu press the A WV button to select Fine Tuning and press the OK button to enter Fine Tuning progress Press the lt gt button to Tune forward or backward Press the OK button to again to return Skip In the program Edit Menu press the A V button to select Skip Press the 4 gt button to select On or Off 24 TV Function Store In the program Edit Menu press the A V button to select Store Press the OK button to store the settings and return to the previous menu Geometric Setting VGA mode Press the MENU button once to enter the main setup menu Press the gt button to select Geometric and the screen will display Contrast as the figure right Srighinesa Aula Auai In the menu press the OK or W button to Phata enter the menu Press the A V button to Manual Glock select an item Press the MENU button to BERTA return to the previous menu Press the EXIT button to exit the menu Seino Color Tamperature Note the items in the Geometric Setting menu can be set when there is VGA signal Contrast Press the A V button to select Contrast and press the 4 gt button to adjust the whole screen brighter or darker Brightness Press the A V button to select Brightness and press the 4 gt button to adjust the value Auto Adjust
34. ouble the size of teletext letters in the upper half of the screen second to Jm Ta moi In DVB mode press to select TV or Radio In DVD mode press to repeat a chapter 8 E 21 double the size of teletext letters in the i 2H j 9 m lower half of the screen and third to 10 E e resume normal status TOL CH Pur d 3j track title or all content 37 CARD AUDIO button In TV Composite S Video mode press to show hide the teletext list In DVB mode press to select audio track M In DVD mode press to enter SD or 18 35 MS MMC mode It is priority for the Ei USB memory input 20 En 38 ANGLE LANG button Inteletext TV mode press to display the subpage of teletext In DVB mode press to select audio language In DVD mode press to access various camera angles if the DVD disc contains multiple camera angles 11 Remote Control Preparation of Remote Control Using of Remote control softly push the back cover to open the battery Point the remote control unit from no more than compartment about 7m from the remote control sensor and within about 60 degrees of the front of the unit Insert two batteries 1 5V size AAA please make sure the polarity matches the marks inside the compartment ooftly press the back cover to close it e The operating distance may vary depending to the brightness arou
35. ow Blue button Press to select the yellow blue option button Press this button to hold the current page and press again to resume button Press this button the first time to double the size of teletext letters in the upper half of the screen a second time to double the size of teletext letters in the lower half of the screen and a third time to resume normal status 9 button Press this button to show or hide the teletext list 10 button Press this button to display the subpage of teletext 28 DVB T Functions Preparation 1 After connection press the POWER button to turn on the unit 2 Press the INPUT button on the remote control or the button on the TV set to select DVB mode 3 Press the SETUP on the remote control to display set up menu 4 Press the 4 P gt direction buttons on the remote control to select a category All the items in the category will appear on the screen 5 Press the AUDIO EXIT button to exit DVB setup menu System Setting Press the SETUP button to enter the setup menu Press the 4 gt direction buttons to select System Setting and press the OK button to enter the screen will display as below In the menu press the A V direction buttons to select the desired item Press the SETUP button to return to the previous menu Press the AUDIO EXIT button to exit Time Setting You can set the TimeZone Setting and the Banner Timer Setting Press the A V buttons to select Tim
36. rce YPbPr Use the audio and video cables to connect the Y PbCb PrCr input Jacks on the right side of the unit s rear panel to the external AV signal source COMPONENT IN al 5 8 e nj AV SIGNAL SOURCE After connection turn on the power of the unit and the external AV signal source Press the INPUT button on the remote control or the SOURCE button on the TV set to select YPbPr mode Connecting an HDMI Signal Source Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit 3OI 3d LAdLNO After connection turn on the power of the television and the external HDMI device and use the Input button on the remote control or the SOURCE button on the TV set to select HDMI mode Note HDMI provides both audio and video signals and typically provides superior image quality to component S Video or composite Svstem Connections Connecting to a PC The unit can be connected to PC personal computer via the VGA cable Follow the steps and the figure below to connect 1 Connect one end of the VGA cable to the VGA input jack on the right side of the unit s rear panel and the other end to the PC 2 Connect one end of the audio cables to the PC audio input jack on the right side of the unit s rear panel and the other end to the PC audio output jack 3 You had better set the PC s resolution at 1440x900 and the refresh frequency at 60Hz
37. re is no sound Make sure the volume is not turned down or muted Make sure the sound setup is correct In DVD mode make sure disc is not dirty or warped There is no picture or picture Make sure all connections are correct moves up and down Make sure the unit is in correct video mode Make sure disc is loaded in correctly Make sure disc is not dirty or warped Make sure the region code is the same as region code of DVD disc Make sure water condensation has not occurred If it occurs take out the disc and leave the unit on for at least one hour The unit can t play discs The unit does not continue to play discs or plays the same section repeatedly Make sure disc is not dirty or damaged Make sure the unit is not any repeat status Make sure there are no obstructions between remote control and the unit The remote control does not Make sure the remote control is pointing at the unit Work Make sure the battery is installed into the remote control correctly Make sure battery is not too weak Other Notes Static or other external interference may cause the unit to behave abnormally In this occurrence unplug the power supply cord from the outlet and plug it in again to reset the unit If the problem persists then please disconnect the power and consult a qualified technician 52 Specifications TFT LCD Resolution 1680 x 1050 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured
38. rs that produce heat 9 Read heed and follow all instructions to ensure correct and safe installation and inter connection of the apparatus 10 The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 11 The mains socket outlet shall be installed near the apparatus and the mains plug shall remain readily operable 12 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 13 Only use attachments accessories specified by the manufacturer 14 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 15 Unplug this apparatus during lightning storms or when unused for long periods of time 16 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 17 The apparatus shall be connected to a mains socket outlet with a protective earthing connection Note Do not touch the colour TFT LCD screen by hand directly The image
39. s answers from the display In DVB mode press to exit the DVB setup menu In DVD mode press to select the audio language or audio track SET CALL button In TV mode press to select your favourite channels In DVB mode press to enter the favourite list and press the A V buttons to select your favourite channel and then press the OK button to enter SET FAV button In TV mode press to set the current channel as your favourite channel In DVB mode press to enter the favourite list and add a favourite channel to the list see P37 for details INFO button Press to display the reference information in TV mode SAVE button Press to close the screen display but not the sound It can economize power Press again to resume 10 button In TV mode press this button select one digit channel number two digit channel number or three digit channel number Then press the number buttons to select the desired channel In DVD mode press to select number greater than 10 Remote Control Remote Control Drawing 27 SOUND button e PORA Press repeatedly to select the sound mode wea cere choose from User Normal News Cinema 2 m am am ES 22 2c lt 28 CH A Y button 5 25 In TV or DVB mode press to select n rs channels 29 STEREO button Press to select sound track in TV mode O O O 3 please see P27 for details 30 MENU button 26 Press to enter the syste
40. s in this manual are for reference only and may differ from your model View of Unit Front and Right View 1 Colour TFT screen Colour TFT screen clearly show the data 2 Disc Tray Slot Insert disc into this slot 3 USB Port Connect external USB device 4 SD MS MMC card port Insert SD MS MMC card into this slot 5 gt PLAY button In DVD mode press to play the disc 6 B STOP button In DVD mode press once to stop playback and then press the PLAY button to resume normal playback Press this button twice repeatedly to stop completely 7 4 EJECT button In DVD mode press to eject the disc 8 CHA V button In TV mode press to select channels In setup menu the same function as A W direction buttons View of Unit Front and Right View 9 VOL A V button Press to decrease or increase the volume In setup menu the same function as 4 P direction buttons 10 POWER button Press to enter or exit the standby mode 11 MENU button Press to enter or exit system setup menu 12 SOURCE button Press repeatedly to select the input mode choose from TV Composite S Video YPbPr VGA HDMI DVD and DVB 13 Remote Sensor 14 Power Indicator Lights is blue while the system is active and red while the system is in standby 15 Speakers View of Unit Rear View Open the back cover on the right side of the unit s rear panel and all the connecting jacks will appear as shown on the below
41. s on a CD disc by default You can use the m4 buttons or number buttons to select a track Stop Press the m STOP button once to stop playback and press the PLAY button to resume normal playback Press the m STOP button twice to stop playback completely Pause Press the PAUSE button to pause playback and then press the PAUSE button again or PLAY button to resume normal playback Previous and Next Press the m4 button to go the beginning of the current track Press twice repeatedly to go the previous track Press the button to play from the beginning of the next track Fast Playback Press the 9 button on the remote control to activate fast backward or forward playback Repeat Press the REPEAT TVR button repeatedly to repeat a single track all tracks or to exit repeat mode e Some discs do not support the repeat function Audio During playback press the AUDIO EXIT button to toggle audio output between Mono Left Mono Right Mix Mono or Stereo 41 DVD Plavback Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution Hundreds of pictures can be stored on a disc in this format In order to view JPEG photo albums you can ask your film development company to make a PICTURE CD when they develop your film Normal Playback Load a JPEG disc in For JPEG disc there will be a root menu displayed on the screen Use the OK button and
42. s or authorised service agent WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus NON ANALOG OUTPUT MANUFACTURER LICENSE AGREEMENT This product incorporates copy protection technology that is protected by U S and foreign patents including patent numbers 5 315 448 and 6 836 549 and other intellectual property rights The use of Macrovision s copy protection technology in the product must be authorized by Macrovision Reserve engineering or disassembly is prohibited 22 Important Safety Instructions Note 1 Read these instructions IMPORTANT FOR LASER PRODUCTS 2 Keepthese instructions 1 CLASS 1 LASER PRODUCT 3 Heed all warnings 2 DANGER Visible laser radiation when open and interlock 4 Follow all instructions failed or defeated Avoid direct exposure to beam 5 Do not use this apparatus 3 CAUTION Do not open the top cover There are no user serviceable parts inside the unit Leave all servicing to near water qualified service personnel 6 Clean only with a dry cloth 7 Do not block any ventilation openings Maintain well ventilated conditions around the product Do not put product on bed sofa or anything that blocks ventilation Install in according to the manufacturer s instructions 8 Do notinstall near any heat sources such as radiators heat registers stoves or other apparatus including amplifie
43. the direction button to select a submenu and then use the A V lt gt direction button to select the contents Many discs have other contents besides pictures For a Picture CD disc it will display the pictures automatically During playback press the KK buttons to select picture e Many discs have other contents besides pictures Stop Press the m STOP button to preview the pictures behind currently playing picture in the way of small pictures Press the PLAY button to resume normal playback Pause Press the PAUSE button to pause playback press the PAUSE button again or PLAY button to resume playback Repeat During playback press the REPEAT TVR button repeatedly and the repeat modes are Shuffle Random Single Repeat One Repeat All and Repeat Off Previous and Next During playback press the button to select picture Menu Press the MENU EPG button once to stop playback and return to the root menu Picture Rotation During playback press the 4 gt button to rotate the currently displayed picture This function only activate for the current picture once another picture is displayed rotation will be cancelled automatically e Note Some JPEG discs may not support the rotation function 42 DVD Plavback Operation DIVX Playback DIVX is the name of a revolutionary new video code which is based on the new DIVX compression standard for video 1 Load a DIVX disc in the disc tray the player will enter
44. the direction buttons and the number buttons to input press the K yellow button to open the softboard and the direction buttons to select numbers or characters Press the OK button to confirm input press the SETUP button to return Delete Select Delete and press the OK button to display the delete confirm information Press the OK button to delete the selected channel or the AUDIO EXIT button to cancel Lock amp Unlock Select Lock amp Unlock and press the OK button to enter Enter the pin code by pressing the number buttons to lock or unlock the channel Move Select Move and press the OK button to enter Enter the channel number by pressing the number buttons to move the current channel to the channel you input 36 DVB T Functions Favorites List Press the SETUP button to enter the setup menu Press the 4 gt direction buttons to select Favorites List and press the OK button to enter the screen will display as below Favorites List In the menu press 4 red button repeatedly to select different Fav Group Add Favorite Channel Press the direction button to enter PopUp menu and press the A V direction buttons to select Add Press the OK button to display the channel list and press the A V direction buttons to select channels Press the OK button to add the channel you selected to the favorite list Delete Favorite Channel Press the direction button to enter the PopUp menu and press the A V direction
45. to select HDCD Setup Press the OK button to enter the menu as shown below Setup Page 1 On the menu press the OK button to enter the setup 2 Use the A V direction buttons to select items 3 Press the OK button again to confirm selection and return 4 Press the 4 button to return Video Setup Press the SETUP button to enter the General setup menu then use the 4 gt direction buttons to select Video Setup Page the screen will display as shown below Video Setup Page On the menu Use the A V direction buttons to select the desired item Press the OK button to enter the item Press the lt button to return Ga Vidoo Quality Setup Page Video Quality Setup Select Quality press the OK button to enter the menu as below Video Quality Setup Sharprirns MID Higi Brighinas Sir per 48 DVD System Setup Sharpness Quality Setup MID Hini Birightni Medium Ser per Brightness Brightness HEB n Contrast Contrast HH DivX VOD Setup 2 3 Press the A V direction buttons to select Sharpness Press the OK button to enter the setup Use the A V direction buttons to select High Medium or Low Press the OK button again to confirm selection and return Press the A V direction buttons to select Brightness Press the OK button to enter the setup Use the
46. under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works 1992 1997 Dolby Laboratories Inc All rights reserved If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste Please recycle where facilities exit Check with your Local Authority or retailer for recycling advice Waste Electrical and Electronic Equipment Directive 53 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 www palsonic com au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888
Download Pdf Manuals
Related Search