electronic punching- and timing system
Contents
1. Emt Product information Ecards 1 1 JAM Electronic Punching and Timing system Product information sheet EPT 3Printer Return e Printer for MTR 3 e The Mini time recorder printer is a standard thermal printer Prints split times from e cards Chargeable Will print about 1000 e cards with an average of 15 controls e Facts e Easy handled and easy carried printer for connecting to MTR 3 e Print split times and control codes from e cards Charge for 4 5 hours Possible to print on multi copy papers Serial connection Battery warning Easy paper and battery change EPR connected to a MTR3 Read more Manual and Fag Zipped world file EPR 3 Printer for MTR 3l Printout example Options 8390 EPR 3 Thermal printer 8391 Extra battery package for EPR 3 8392 Y cable Pc Martel printer All information subject to change Copyright 1999 Emit as http www emit no ept ntrprinter3 htm 2004 10 25 Timer RTR 2 1 2 EMIT TIME RECORDER RTR 2 The Time Recorder RTR 2 is one of the most advanced timimg equipment at the market but still it is easy to use Its price is also very competitive Due to its user friendliness and its capacity the RTR 2 is suited for small as well as for large competitions Emit Time Recorder RTR 2 is a timing device meant to be used in a variety of sports The most common use is time taking combined with the registration of start numbers It is possible to connect the R2. withstand temperatures down to minus 20 degrees Celcius Start unit electronic unit with light signal placed at the start which resets and activates the e card When the e card is lifted from the start unit the timer in the e card will start Control unit electronic unit at the control which transfers it s identity code to the e card http wwwv emit no ekt epts htm 2005 03 18 Electronic Punching and Timing System 2 50 when the e card is placed on the control unit Control codes from 31 to 176 exept 66 68 86 89 98 99 exist As part of the back up system each control unit is equipped whith a small spike which will leave a hole in the back up label 140 spike positions exist each corresponding to the electronic code This way it is also possible manually to check that the runner has been to all the right controls The control unit as well as the start unit has a sealed in battery with a capasity to last 8 10 years Back up label thin plastic coated label which is attached to the backside of the e card serving as a part of the manual back up system Reading unit electronic unit placed near the finish for reading the e cards after the runner has crossed the finish line The reading unit is connected to the Time Recorder or directly to a PC if using electronic timing i e the time is taken by the timer in each e card Time Recorder Emit Time Recorder RTR2 modified version which registers finish tim
3. EPT it is impossible to cheat by taking the controls in wrong order disqualified This fact makes the system ideal for instance when using small areas with crossing courses If punching on the wrong control a runner will be automatically disqualified The PC program offers automatic printout on every runner that is disqualified This printout together with the runner s back up label will normally eliminate all discussions as to whether a runner should be disqualified or not If a runner has neither electronic record nor the manual punch mark from the control one must conclude that he has not been to the control or not done the punching properly Consequently he must be disqualified Punching several times on a certain control or punching on to many controls will not cause problems and of course no disqualification For instance if a runner has punched on a wrong control discovers this and afterwards punches on the right control it will be approved MTR with thermal printer This is the ideal solution for smaller events where there is no access to electricity and for organizers who do not have or want to use computers and software MTR is always used together with electronic timing as described above The MTR automatically assumes the last control to be the finish line and calculates both total time and split times from this When reading the e card the thermal printer automatically prints out the e card number total time split times an
4. after leaving the control by observing the display display cards e Lowest cost electronic punching system Comparable purchasing cost but lower operating cost than main competitor e 10 12 years expected lifetime and 5 years limited guarantee orienteering model e Completely sealed no maintenance on neither e cards or controls e Integrated mechanical backup system ensures backup punch without time loss e Reset and start in one operation at start e Ready for multi sport usage User manual All information as per 10 04 2003 and subject to change Copyright 2003 Emit as http wwwv emit no ept ecard3 htm 2004 10 25 Emt Product information Start unit 1 1 Return Electronic Punching and Timing system Product information sheet Start unit e Start unit electronic unit with light signal placed at the start which resets and activates the e card When the e card Is lifted from the start unit the timer in the e card will start e Facts e Resets old information in an e card Starts the internal timer in e card when the e card is removed from the start unit Expected lifetime 8 10 years 5 years limited guarantee Integrated backup system Two start spikes Start unit allways have code 0 Same design as a control unit Temperature range for usage 20 to 50C Battery warning All information subject to change Copyright 1999 Emit as http www emtt no ept startunit htm 2004 10 25 Emt
5. to 176 exept 66 68 86 89 98 99 exist As part of the back up system each control unit 1s equipped hith a small spike which will place a mark in the back up label 140 spike positions exist each corresponding to the electronic code his way it is also possible manually to check that the runner has been to all the right controls The control unit has a sealed in battery with a capasity to last 8 10 years e Facts e 5 years limited guarantee e 8 10 years expected life time e Battery warning if remaining lifetime is less that 14 days e Control code range 31 176 e Extra control code range 177 276 Except 186 189 198 and 199 e Integrated backup system with no time loss for a runner in case of any failure e No preprogramming neccesary before a race e No batterry changing Control last for 8 10 years with the same battery e Can be used in permanent courses e Can be set into the forrest without any preparations e Optional light signal shows that the unit is working and that an e card is activated e Operational temperature range 20 to 50C e Must be mounted 10mm from magnetic metal All information subject to change Copyright 1999 Emit as http wwv emtt no ept controlunit htm 2004 10 25 Emt Product information Ecards 1 1 Return Electronic Punching and Timing system Product information sheet Online control unit e Online control unit e The online control unit is a normal control unit
6. 00000 EMT pod p00000 0000 00 00 0 HOU EMTODO ODO DO O DD DD ODO OD DDD ODEMITODDDODDo0o0Do DOBO DO DD OO DDD DDD DDD OA C E ea EE EEN N UUUOUUUUO Amado E BO a E E AAN A AAA a AID An DO000000000 Control Unit Aline Control Unit Page2 3 AA AAN NA ANO AN AA AAN AS AB BB DO OOOO DD O DO DO DO DO DO 0D 0000 DAop0000000000 0000 Touch Free Control Un t Page4 5 MEA ata atada arado aaa aaa aaa taa Eee DOBODO DO DDD D0D0 00 00000 e card Ver2 Ver3 Page6 8 AAA AAA OA AA AAA AO Aa E HOUUOUUUUUO Ve3o 00000000000 00000 HOUUUUUUO Page9 DODOD DO DDD ODO OD E e EE E O DOdODooooOo Pagel0 DOBO BDO ODO ODO ODO OD OD DO DDODDODDO dooo000000 vedd Mx 000000000000 ERI Pagell DADO BDO ODO ODO ODO ODO ODO ODO L EEE T E pad d00000000000 Joker control Pagell DOBO BD DO DO ODO ODO ODO ODO ODO DDD DODO0 oo pad dado o000000 0 Radio control Pagell DADO BDO O DD O DO ODO ODO OD DODDODO pad 808000000000 EPT 3Printerf Pagel2 AAA Na a O aaa RR ppopo000000 00 O RIRA Pagels 14 DADO DO DDD ODO ODO ODO DDODD oo DODOoDoooo Pagel5 canta 01400010 141110444000 aa E E e N E OE E daa DODODEMITOOO DO DD ODO DO OO DDD OOO DD 0000000 Emt Product information Control Units 1 1 Return Electronic Punching and Timing system Product information sheet Control units Control unit electronic unit at the control which transfers it s identity code to the e card when the e card is placed on the control nit Control codes from 31
7. 1999 Emit as http www emit no ept backup htm 2004 10 25 Electronic Punching and Timing System 1 5 ELECTRONIC PUNCHING AND TIMING SYSTEM EPTS The Emit Electronic Punching and Timing system EPT is an Electronic Punching and Timing system for use in orienteering The system 1s developed by Emit AS formerly Regnly Timetech AS in cooperation with the Norwegian and Swedish Orienteering Federations The main intention of EPT was to eliminate the organizer s manual checking of the control cards which with a traditional manual punching system often is a time consuming and difficult operation It turns out however that EPT also makes the punching both simpler and faster In addition the runner can get his split times immediately after having crossed the finish line These features have all made the system very popular 1 PRODUCT SPESIFICA TION 2nd generation equipment in sale from Sep 98 The system consists of the following components all with a five year guarantee E card electronic card tag which the runner carries with him for punching at the controls The e card registers the control unit s electronic code up to 50 controls and the elapsed time This information is stored in the e card until it is reset by the start unit at the next event The e card contains a sealed in battery which when properly stored should last for 8 to 10 years depending on how often it is used The e card is both waterproof and can
8. Product information 250 reader 1 1 Return CU Electronic Punching and Timing system Product information sheet 250 unit e 250 reading unit e The 250 reading unit is a normal control unit but equipped with a 250 RS232 cabel This unit is used to read data from an e card into a clock or a PC e Facts Reads information from e card into a RTR2 or a pc 5 year limited guarantee 8 10 years expected life time Equipped with an RS232 port Battery check Always code 250 No backup spikes All information subject to change Copyright 1999 Emit as http www emit no ept 250 htm 2004 10 25 Emit as Tollbugt 6 0152 Oslo Tel 47 22 91 03 00 fax 47 22 91 03 01 E mail emit emit no web www emit no New products from Emit Emit is continuously developing our Electronic Punching and Timing system EPT to make life easier both for the organizers of orienteering events and for the orineteerers themselves We can now introduce three new products especially designed for the clubs and organizers MINI TIME RECORDER MTR 4 The new Mini Time Recorder MTR 4 1s a reading and storage unit made specially for the Emit Electronic Punching and Timing EPT system MTR 4 can be connected to the EPR3 printer and a PC USB or serial and has storage capacity for more than 2 000 e cards with up to 50 controls each The data stored in MTR 4 may be transferred immediately or at a later time This makes the MTR 4
9. SION The Emit Time Recorder RTR2 is the most used time recorder finish clock in Norway It can be used in most sports and features 13 different programs The EPT version includes 2 special EPT programs Price NOK 13 400 If you already have the RTR2 you can upgrade it to the EPT version The upgrading includes the PC program Tracy Price NOK 2 400 PC PROGRAMS Emit supplies two PC programs which can be used against EPT Tracy which is ideal for individual events only when using a PC stand alone solution with electronic timing Price NOK 2 000 English or norwegian version X Sport formerly Axess X sport which is ideal for all major events with speaker support relay program etc Norwegian version only Finnish version hopefully soon available Etiming is Emit s new Windows based software for complete event administration Price NOK 2 000 http wwwv emit no ekt epts htm 2005 03 18 Electronic Punching and Timing System 9 5 MTR2 complete with Thermal printer Back to Emit Homepage Emit AS Phone 47 22 42 30 50 Bank 6011 05 80439 Tollbugt 6 Fax 47 22 42 55 53 Post 0807 33 65806 N 0152 Oslo E mail emitO emit no F nr NO 930127686 MVA http wwv emt no ekt epts htm 2005 03 18
10. TR 2 with various extra equipment used to handle competitions where times start numbers points etc are to be registered Description The Time Recorder RTR 2 has a key board used to register start numbers There are two displays that present information The first one displays start numbers with large characters The other display four lines gives information in both the programming and the user mode The built in printer prints all registrations The RTR 2 has got two gates connections for external equipment Among these is one connection for a PC and another for a barcode reader Equipment that comes with the RTR 2 Y Finishline button with 3 meter cable W Battery recharger to charge the built in batteries W Several language modules available Built in programs The Time Recorder RTR 2 has 13 programs located in its PROM The user decides which program that is to be used and then he answers the questions associated with this particular sport programming Thereafter the RTR 2 is put into user mode Choices of programs Output of the finish line times Output of the start numbers and the finish line times Interval start Output of the start numbers the used times and the finish line times Alpin program no 2 advanced alpin that makes use of some extra equipment RAC assembly box and RKP key pads Both the start numbers and the times are recorded at all places where the used times are to be taken Alpin program no 1 s
11. but equipped with an RS232 cabel This unit is used to read data from an e card into a clock radiotrasmitter or a PC e Facts e Reads information from e card into a RTR2 or a pc or a transmitter 5 year limited guarantee 8 10 years expected life time Equipped with an RS232 port Battery check Codes as normal control Backup spikes as for a control Can be equipped with a light signal All information subject to change Copyright 1999 Emit as http www emit no ept onlinecontrol htm 2004 10 25 Touch free punching 1 2 Return VY Electronic Punching and Timing system Product information Touch free control general ouch free punching is a new way of approve right control visit for orienteering and related sports A control unit is placed on the control site and runners had to near touch or run close beside the control Range is app 1 0 meter Runner ill see in the e card display that they have punched successfully If no registration runner must either try again or punch at the designed area at the control plate for getting a backup punch A light signal verifies proper backup punch Touch free punching in This system is a mixture of our traditional orienteering system being used for 10 years and our e line system used for almost 3 years Both systems are build into the control unit The system has been used in races since 2002 and more than 20000 times has been taken Usage includ
12. ce our hands free controls have everything integrated it is very easy to put out just one 500 gram item per control site Backup Integrated backup system secures that runners with a broken e card or a version 2 e card also get a approved punch Time delay using the backup feature is same or less than competitive systems Usage E Runner should near touch the control with the e card H and later check on the display to verify proper registration On the e card control code is showed as soon the e card reach the range of the control A scroll bar continues to scroll for at least 5 seconds For ski orienteering version of e cards for 15 seconds If the e card failed to register the control runner should fl punch on the designed field at the control unit getting a backup registration or use another unit or manually punch pin A special designed e card holder can be bought making http www emit no ept handsfree htm 2004 10 25 Touch free punching 2 2 it easier to carry the e card Development Ready for sale January 2004 Main features 8 advantages World leading punching system with over 130 000 units sold version 1 8 2 amp 3 Worlds fastest punching system Data transfer between control and e card is done within 1 20th of a second Control of proper punching can be done after leaving the control by observing the display e Lowest cost electronic punching system Comparable purchasing cost but lower ope
13. control to visit is then shown after start P1 after first control P2 along with the elapsed time from start Immediate split times after a race After finishing a race the runner can immediately scroll though all split times and accumulated times to every control by pressing the red scroll button Increased lifetime New technology has improved the expected lifetime of the display e card by approx 20 to 10 to 12 years of normal use i e 12 years and 600 races For the ski model the expected life time is 4 years This model is active all the time compared to the Orienteering model with time out after each race and therefore has to be activated on start before use e line receiver The e card also comes in with an e line receiver This allows the runner to finish a race by crossing a wire without punching at an control This will also enable the runner to use the e card in other kind of sports such as cycling running where Emit s e line technology is used The receiver can also be used for start and intermediate split times and will have a resolution of up to 1 10 of a second Main features amp advantages http wwwv emit no ept ecard3 htm 2004 10 25 Usage E cards version 3 2 2 e World leading punching system with over 120 000 units sold version 18 2 48 3 e Worlds fastest punching system Data transfer between control and e card is done within 1 8th of a second Control of proper punching can be done
14. d competitions with interval start Capacity for people in funnel 255 255 times can be taken before any start numbers are registered Display for presenting start numbers Display 4 lines for message in the programming mode and the user mode Built in printer with output of all events RS 232 series output to a PC RS 232 series output to a PC CANAAN W 5 extra inputs for various extra equipment Y Size 22x28cm W Weight 1 8 kg Y Developed and produced in Norway by Emit AS Emit as Tollbugt 6 0152 Oslo Norway Phone 47 2242 3050 Fax 47 2242 5553 Email emit emit no http wwv emit no ski rtr2e htm 2004 10 25 Emit Product information backup 1 1 Return DA LAN Electronic Punching and Timing system Product information sheet Backup labels e Backup label e Is attached to the e card serving as an extra feature for the runner e Facts Made of plastic coated paper Receives a mark unique for each control code Comes in rolls of 550 Can be printed directly on by thermal printers Ovation2 1s a well designed printer for such printing e Yellow color on Out page withe inside e Our integrated backup system gives a runner confidence of having a visible and valid proof from punching at a control even 1f a control unit or an e card should fail Backup 1s automatically taken without any time loss or distractions for a runner All information subject to change Copyright
15. d the control codes registered by the e card Since the MTR is not programmed it will not know the runner s name or class or whether the runner has been to the correct controls in correct order The result list and the punching control hence has to be done manually by checking the printout After checking the printout and written the total time on the result board the runner keeps the printout If organizing a regular event back up timing should be obligatory The runners must then be given a start time and a seperate clock should be kept next to the MTR in order to be able to calculate the runner s time if a runner has not activated the e card properly or the e card does not work 3 REFERENCES Testing of the EPT started in 1993 and continued in 1994 when 2000 e cards and 400 control units were made and used by all classes at 11 events in Norway Sweden and Denmark After these test events NOF made a report which concluded that the system had worked satisfactory This report is available at NOF in both English and Norwegian In 1995 EPT equipment was offered for hire and important events like WOC in Germany the open Nordic championships in Sweden the Norwegian and the Swedish championships Tio mila Smalandskavlen and the elite classes at the Swedish 5 days used EPT Altogether more than 40 events and more than 42 000 runners used EPT during 1995 In 1996 the first major event to use the system was the SKI O World Championship at Lilleham
16. e start Place the start unit on the start line Place a control unit on each control one unit is normally enough Control units must not be attatched directly to metal keep a distance of 1cm Use a control unit with the same electronic code as the control s visual code in order to limit misunderstandings Place a normal control on the finish line and define this control as finish in the PC program The e card 1s handed to the runner a few minutes before start The runner should fasten the e card on a finger on the opposite hand of the compass hand with the back up label facing down The runner places the e card in the start unit a few seconds before the start time At the start signal the e card is lifted from the start unit as the runner starts The timer in the e card is thus activated and the time is running To obtain a record at each control the e card is placed in the control unit with the back up label down and given a firm push with the thumb This in order to also obtain a manual back up punching record from the spike at the control unit in addition to the electronic record The total time finish time will be taken when the e card is placed in the control unit placed on the finish line After obtaining a record at the finish control the runner walks on to the reading unit places his e card and immidiately gets his individual printout showing split times total time which controls he has been to and whether the race is approved or not With
17. ectronic card tag which the runner carries with him for punching at the controls The e card registers the control unit s electronic code up to 50 controls and the elapsed time This information is stored in the e card until it is reset by the start unit at the next event The e card contains a sealed in battery which when properly stored should last for 8 to 10 years depending on how often it is used The e card is both waterproof and can withstand temperatures down to minus 20 degrees Celcius Facts E cards are sold with a 5 years limited guarantee 8 10 years expected life time Internal counter count races Compleately sealed Integrated backup system gives backup punch without any time loss Very fast punching Data transfers between controls and e card is done faster than 1 8th of a second Reset and start in one operation at start More than 50 000 units sold Sutiable also for Skiorienteering Temperature range for usage 20 to 50 C All information subject to change Copyright 1999 Emit as http wwwv emit no ept ecard htm 2004 10 25 Usage E cards version 3 1 2 Return A A Electronic Punching and Timing system Product information E card Version 3 E card s in general version 1 2 and 3 Emit e card also named electronic card or tag is a small card that a orienteering runner carries along for punching at the controls When punching at a control by placing the card on top of a control w
18. es and pairs these with the information from the e card for transmission to the PC PC program PC program especially made for checking the information from the e card against the correct course and for printout of results with split times The program also offers the usual functions found in ordinary event administration programs Mint Time Recorder MTR with thermal printer The MTR is a reading unit with replacable battery and storage capacity for up to 2500 e cards The MTR can be connected to a PC when using the PC stand alone alternative or directly to a special thermal printer with rechargeable battery for print out of total time split times and control codes 2 HOW TO USE The easiest way to use EPT is to use or the PC stand alone alternative and electronic timing or the MTR with the thermal printer PC stand alone solution Enter the names of the runners and e card number if the runner has his own e card classes clubs and courses with the electronic conrol codes in the PC program Make the drawing in order to get a start list Use the start list to allocate an e card e card code to runners who do not have their own e card Print or write the runner s name class start time and e card code on the back up label and attach it to the e card Keep the e cards sorted in starting http wwwv emit no ekt epts htm 2005 03 18 Electronic Punching and Timing System 3 5 order for handing out to the runners at th
19. es the Nordic Ski orienteering championship 2004 Main difference from our orienteering system is the fact that runner get responsible for verifying that a proper punch has been done Since each runner gets their own punch verification where will not be any situations where they are in doubt whom of them getting the verification Features of touch free punching control Integrated control panel 29x29 cm and control unit Battery powered Expected lifetime is 2000 race hours for battery Control unit s starts with a punch on the control by ecard Once started Control unit remains active for 10 hours Weight is about 550 gram The control unit will normally be mounted on a orienteering flag Unit is complete sealed and waterproof Low weight and easy set up makes this system ideal for all kind of orienteering races but the system is also well suited for multi sport extreme races and other competitions where a control point is desired Range Controls have a range of app 1 meter Strongest in front and behind and weakest around the sides The range is selected based on the fact that for orienteering purposes it still should be a control point to find making no changes in the way of doing the sport Faster punching Emit hands free punching allows much faster punching that any other punching system and it is very suitable for ski orienteering mountain bike orienteering and sprint orienteering Easier organization of orienteering races Sin
20. ideal for all orienteering events small or large MTR 4 has an integrated keyboard which makes it easy to enter e cards manually and or setting the internal clock It is also possible to set the MTR 4 to only print e card number and time using it as a backup clock The built in batteries have an expected lifetime of 10 years and may be replaced JOKER CONTROL The new Joker Control from Emit makes it possible to manually set the code number for a control This makes it possible for organizers of orienteering events to manage without having to buy unnecessary many control codes The control code for the Joker Control is set by using a special e card from Emit The Joker Control s spike is placed at a spot previously unused by control units RADIO CONTROL The new radio control set from Emit consists of online control units transceiver radios and a receiver radio Up to 8 online controls may be connected to each transceiver and it is possible to have as many as 7 transceivers simultaneously sending data to the receiver in the finish area The range between the transceivers and the receiver depends upon the topographic situation but may be improved by using one of the transceivers as an amplifier The radio controls are compatible with the speaker module in eTiming and the controls may be used for intermediate times The system uses approved radio frequencies and is based upon standard industrial products
21. imple alpin where the startgate and the photocell s are coupled directly to the RTR 2 e Cross country special program with a startgate intermediate times and photocells at the finish line e Biathlon special program with the same possibilities as in program 6 In addition misses can be registered at the place where the shooting takes place with RKP keypads e Parallel slalom Time taking in mass running competitions The time is taken at the same time as the start number is registered usually with a bar code reader Track 8 Field time taking in heats one lane Track amp Field time taking in heats multiply lanes Orienteering EPT manually timing Orienteering EPT Electronic timing http wwv emit no ski rtr2e htm 2004 10 25 Timer RTR 2 2 2 Extra equipment The most common equipment extra equipment is e A special case for storage and transportation e Photocell alpin cross country etc e A synchronizing box with 25 m cable orienteering road e Barcode reader reads start numbers written in races etc barcodes e Datacable between RTR 2 anda PC e RAC assembly box with 10 inputs e Start gate alpin cross country etc e EPT reading unit e RKP keypads alpin biathlon etc Specifications Battery driven built in rechargeable batteries that can be uses for at least 10 hours Remembers stores 5 000 pairs of start numbers times Contents of 200 e cards 125 different classes may be programme
22. ithin a few centimeters the e card stores the controls electronic code along with the elapsed time since start The e cards hold until 48 control codes and times in its memory that remains until reset by a start unit at the next event The e card contains a sealed in battery that supplies the e card with energy for 8 to 12 years of normal use The e card is waterproof and can operate in temperatures from minus 20 to plus 50 degrees Celsius Features of Emit Display card version 3 LCD display Emit display cards are fitted with a display giving information such as used time controls and split times Faster punching When a runner punches at a control the display shows the control code split time and a vividly scrolling vertical bar to announce that proper punching at the control has been accomplished The runner can verify this after leaving the control without having to wait at the control for any feedback from the control i e a light signal This enables much faster and securer punching than any other manual or electronic punching system Progress indication during a race The e card can hold the control codes to visit in its memory and show the next control to punch at when the card has uploaded this on a preprogrammed start unit The punching at the correct control can then be verified immediately from the display If the e card has not uploaded these controls it still will show race progress by sequence numbers The next
23. mer in February Most world cup events also used EPT Altogether 100 events and about 80 000 runners used the hire equipment in 1996 In 1997 EPT was made an obligatory system for organizers of IOF E events and national events in Norway Emit EPT system was also used at WOC NOM JWOC Tiomila etc In 1998 Finland also chose Emit EPT and intend to use it on a large scale from 1999 http www emit no ekt epts htm 2005 03 18 Electronic Punching and Timing System A 5 WOC 99 in Scotland will also use Emit EPT system 4 PRICES 2nd GENERATION EPT EQUIPMENT All prices in NOK ex VAT and transport costs START KIT All you need to get started Ideal for club training and for the organizer to get acquainted with EPT Special introduction price NOK 20 000 You save NOK 4 000 on ordinary sales prices Consists of MTR and printer 20 e cards 1 roll of 550 back up labels start unit reading unit 20 control units and PC program Etiming Ordinary prices for additional items per unit volume discount not included e card NOK 250 control unit NOK 350 start unit NOK 450 reading unit NOK 750 1 roll of back up labels NOK 209 MTR NOK 3 333 Thermal printer NOK 4 667 Start kits and additional EPT items will be in stock from September 1998 Assuming the organizer at least has bought a start kit it is also possible to hire additional equipment when using EPT at an event Contact us for an offer TIME RECORDER RTR2 EPT VER
24. rating cost than main competitor Completely sealed no maintenance on controls Battery last for 2000 race hours Integrated electronic backup system ensures backup punch with only minor time loss Reset and start in one operation at start Battery warning and power control Backup system and possible to use also with version 2 e cards Control codes can be programmed Unit can be stopped manually References Orienteering and Multi sport Norwegian championship ski orienteering relay 2003 Stoltzekleiven opp Running 2000 runners 4 races Norwegian cup ski orienteering 2002 and 2003 Postgirobygget opp Running NWR Skio race V l dalen Sweden 2002 Rondane extreme Multisport Stavernsprinten Larvik OK July 2003 VesterGyllen Asker sk Sept 2003 Sprint o Idre Sweden June 2003 Fana il Okt 2003 Sals s Grand Prix Larvik Sept 2003 Samnanger il Okt 2003 NOM Ski orienteering 2004 World rank races ski o Sweden 2003 2004 Norges Idrettsh yskole Several races 2004 Lillomarka o lag Test race October 2003 Several test races Japan 2004 Test races Sweden May 2004 MTBO Peel adventure 31 5 04 UK Mountain Bike Nydalten 06 06 04 Norway 500 orienteering Action pictures All information as per 14 04 2004 and subject to change Copyright 2004 Emit as http www emit no ept handsfree htm 2004 10 25 Emt Product information Ecards 1 1 Return CM Electronic Punching and Timing system Product information sheet E cards E card el
Download Pdf Manuals
Related Search