- Afrihost
Contents
1. 12 2 Before You Begin You can connect directly to a DSL line or to a fiber cable modem Note If you are connecting to a DSL line make sure that your DSL service is active before you install the modem router You need the information listed here to install your DSL modem and connect to the Internet Locate it and have it on hand before you start the installation procedure DSL user name and password This information is included in the welcome letter your DSL ISP sent you when you signed up for your service Record your DSL Internet service account user name and password here User name Password Your telephone number or DSL account number If you do not have voice service you can use your DSL account number in place of a phone number If you do not know or cannot locate your user name and password call your DSL Internet service provider The table on the next page lists the contact information for some of the primary DSL providers Be specific when speaking with your DSL Internet service provider For example you could say I need my DSL service user name and password Can you help me Note If your provider says that they do not support NETGEAR services tell them you need only your DSL user name and password you do not need support DSL Internet Service Provider Phone Number AT amp T DSL not AT amp T U Verse 877 722 3755 AT amp T BellSouth DSL not AT amp T U Verse2. 888 321 2375 CenturyLink 800 809 1410 CenturyLink Qwest 800 247 7285 Covad DSL 888 642 6823 EarthLink 888 829 8466 SureWest 888 639 1611 TDS DSL Support 866 571 6662 US Family 800 300 4256 Verizon 800 567 6789 Windstream 877 901 4692 3 4 Install Your Modem Router A microfilter filters DSL interference out of standard phone equipment that shares the line with DSL service Examples of devices are telephones fax machines answering machines and caller ID displays 1 Connect to the Internet You can use a DSL connection or a cable fiber Internet connection To connect ADSL Install an ADSL microfilter between the phone line and the phone Connect the ADSL port of the modem router to the ADSL port of the microfilter Use an ADSL microfilter for every phone line in the house if your modem router and telephone connect to the same phone line ADSL Phone Line 5 To connect cable fiber modem Use an Ethernet cable to connect the cable fiber modem to the Ethernet WAN port labeled 4 WAN on the rear panel of the modem router 2 Add power to the modem router To DSL Internet or To cable fiber Internet a Connect the power adapter to the router and plug the power adapter into an outlet b Wait for the WiFi LED on the front panel to light If no LEDs are lit press the Power On Off button on the rear panel of the modem router 6 3 Connect
3. a computer To DSL Internet or To cable fiber Internet You can use an Ethernet cable or connect wirelessly For a wired connection use an Ethernet cable to connect your computer to an unused yellow Ethernet LAN port on your modem router To connect wirelessly use the preset wireless security settings on the label on the bottom of the router 4 Launch a browser The first time that you connect to the modem router the genie screen displays Follow the genie steps to connect to the Internet If the genie screen does not display close and reopen the browser and enter http routerlogin net in the address bar See Troubleshooting on page 10 Preset Wireless Security This product has a unique WiFi network name SSID and network key password The default SSID and password are uniquely generated for every device like a serial number to protect and maximize your wireless security This information is on the label on the bottom of the product 7 NETGEAR recommends that you do not change the preset WiFi SSID or password If you do change the settings the SSID and password on the label no longer apply WiFi network name Network key password SSID Wireless Network Settings Record the default preset wireless settings that are printed on the label in the spaces for easy reference WiFi network name SSID Network key password If you change the default settings record them here for easy refe
4. and enter readyshare in the address bar On Mac systems follow this procedure 1 Select Go gt Connect to Server 2 Enter smb readyshare as the server address 3 Click Connect Other Features For more features including Live Parental Controls traffic metering ReadySHARE guest access and more log in to your router at http routerlogin net 2012 NETGEAR Inc All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means without the written permission of NETGEAR Inc DO NOT stack equipment or place equipment in tight spaces or in drawers Be sure that your equipment is surrounded by at least 2 inches 5 cm of air space Trademarks NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice Other brand and product names are registered trademarks or trademarks of their respective holders 2012 NETGEAR Inc All rights reserved
5. name and password as the password You can use an Ethernet cable or connect wirelessly modem router NETGEAR genie displays Power On Off Compliance Declarations of Conformity For the complete EU Declarations of Conformity visit support netgear com app answers detail a_id 11621 This symbol is placed in accordance with the European Union Directive 2002 96 on the Waste Electrical and Electronic Equipment the WEEE Directive If disposed of within the European Union this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive Intended for indoor use only in all EU member states EFTA states and Switzerland 1 Contents Before You Begin 2 Install Your Modem Router 4 Preset Wireless Security 6 Wireless Network Settings 7 Join the Wireless Network 8 Access the Modem Router to Make Changes 9 Troubleshooting 10 ReadySHARE Access 11 Other Features
6. NETGEAR Inc 350 East Plumeria Drive San Jose CA 95134 USA December 2012 Technical Support Thank you for selecting NETGEAR products NETGEAR recommends that you use only the official NETGEAR support resources After installing your device locate the serial number on the label of your product and use it to register your product at NETGEAR com register Registration is required before you can use NETGEAR telephone support service Registration through the NETGEAR website is strongly recommended Visit support netgear com for product updates and web support N300 Wireless ADSL2 Modem Router DGN2200v4 Installation Guide Package Contents The box should contain the following items If any items are incorrect missing or damaged contact your NETGEAR dealer ADSL Phone Line Note Your package might contain more items The filter or splitter provided depends on the region and in some locations a CD is included N300 Modem Router Ethernet cable Phone cable Power adapter Filter splitter ADSL Phone Line You can follow this diagram to connect your modem router or follow the instructions in this booklet 3 Connect a computer 2 Power on the 4 Launch a browser Wait for the WiFi LED to light 1 Connect to the Internet Use either a DSL or a cable fiber connection DSL Internet Cable fiber Internet OR If you do not see genie type www routerlogin net Type admin for the user
7. dem router 1 Launch a web browser from a computer or wireless device that is connected to the modem router 2 Type www routerlogin net or www routerlogin com in the address field of the browser A login screen displays 3 Enter admin for the user name and password for the password The Basic Home screen displays See the user manual for more information about the modem router screens The user manual is available on the web at the NETGEAR support page http support netgear com 10 To change the password for the modem router user name 1 Log in to the modem router 2 Select Advanced gt Administration gt Set Password 3 Type your old password 4 Type the new password twice 5 Click Apply Troubleshooting If the browser does not display the web page Make sure that the computer is connected to one of the available LAN Ethernet ports or wirelessly to the modem router Make sure that the modem router has power and that the WiFi LED is lit If the computer is set to a static or fixed IP address this is uncommon change it to obtain an IP address automatically from the router If the modem router does not power on 1 Check your cables Disconnect and reconnect each cable See if the telephone cable connecting your DSL modem router to the wall jack is plugged into a filter A filter is not required if you do not have telephone voice service A filter installed where i
8. rence and store this booklet in a safe place WiFi network name SSID Network key password To retrieve or update your wireless password type http www routerlogin net in a web browser and log in using the user name admin and default password password Then select Wireless 8 Join the Wireless Network You can use either the Wi Fi Protected Setup WPS method or the manual method to join your wireless network To join the network using WPS 1 Press the WPS button on the modem router 2 Within 2 minutes press the WPS button on your wireless computer or device or follow the WPS instructions that came with your wireless device to complete the WPS process Note Some older wireless computers or devices cannot use WPS To join the network manually 1 On your computer or wireless device open the software that manages its wireless connections This software scans for all wireless networks in your area 2 Look for the WiFi network name SSID and select it The SSID is on the label on the bottom of the modem router If you changed the name of your network during the setup process look for that network name 3 Enter the preset password or your custom password if you changed it and click Connect 9 Access the Modem Router to Make Changes After you use NETGEAR genie to set up the modem router you can log in to the modem router to view or change its settings To log in to the mo
9. t is not needed might eliminate your ADSL signal 2 Power down your modem router and power it up again 11 a Turn off the modem router b Unplug the power adapter and all other cables from the back of the modem router c Wait 30 seconds then reconnect the cables and adapter to your modem router and turn it on d Make sure that the Power LED is lit If the LED is off try plugging the power adapter into another power outlet e Wait for the LEDs to light green 3 Open a web browser and try to access the Internet If steps 1 3 do not resolve the problem 4 Reset your modem router To reset your modem router use a pin or paper clip to press in and hold the Reset button accessed through a small hole ReadySHARE Access After installation and setup insert a USB storage device into the USB port on the modem router to share its contents with other network users If your USB device has special drivers it is not compatible If your USB device requires a power supply use it when connecting your USB device to the modem router It takes up to 2 minutes before the USB drive is ready for sharing For more about ReadySHARE visit www netgear com readyshare 12 To access your USB device On Windows systems use any of these methods Select Start gt Run and enter readyshare in the dialog box Click OK Open a browser and enter readyshare in the address bar Open My Network Places
Download Pdf Manuals
Related Search