AD-8527 Quick USB Adapter Instruction Manual
Contents
1. 6 Setting the Date and Time Note The date and time were set to the Japanese standard time at the factory when shipped Before use set the date and time to your local time Change the date and time as follows 1 Refer to 5 Displaying the Date and Time to display the date and time When the year date or time is displayed press and hold the SET key for 2 seconds or more The display flashes and the AD 8527 enters the setting mode Using the following keys to set the date and time key Increase the value by one CANCEL key Decrease the value by one When the above keys are held pressed the value is increased or decreased continuously SET key Confirm the setting and go to the next item 2 After setting the year month day hour and minute press the SET key to return to the standby display DATE DAE DATE pang e Lee Leh F SET Sets Venu OK jaya ee 7 Transmitting the Weighing Data Transmitting data from a weighing instrument to a personal computer 1 Connect the AD 8527 to the USB port of a personal computer and connect the AD 8527 to a weighing instrument using the RS 232C cable Note Use the cable appropriate to the RS 232C connector of the weighing instrument Power is supplied to the AD 8527 OK and the standby display appears Standby display If either USB or RS 232C is not connected2. appears See re 2 Press the PRINT key of the weighing instrument to transmit the data to the AD 8527 Then the AD 8527 transmits the data to the personal computer as keyboard input OK signals When transmitted a buzzer sounds Ou E and out appears for about 2 seconds Note If data is not input into Excel correctly refer to 10 2 If the Data Fails to be Input into Excel Correctly When transmitting GLP output and statistical results set the weighing instrument Data output pause PUSE to Pause 1 6 seconds 3 Repeat step 2 as necessary 4 Disconnect the weighing instrument from the AD 8527 5 Disconnect the personal computer from the AD 8527 Continued to the reverse side 3 From the front 8 Function Settings In the function setting mode settings of the AD 8527 performance and communication can be changed Each function has parameters By changing the parameter specify the performance of the function The set parameters are maintained in memory even if the AD 8527 is disconnected from the weighing instrument or personal computer 8 1 Setting Procedure 1 At the standby display press and hold the SET key for 2 seconds or more OK Press and hold SET 2 The function display appears Refer to 8 2 Function List Press the key to select a bPS function and press the SET key to Press SE
3. e When connected to the RS 232C interface of a weighing instrument and to a personal computer using USB simultaneously the AD 8527 can transmit the weighing data that the weighing instrument outputs in real time to the personal computer This enables a personal computer without COM ports to receive data e The AD 8527 functions similar to a USB keyboard Thus no software installation such as a driver is not necessary Once connected as described above the weighing data can be transmitted to the personal computer Note that Command transmission from the personal computer to the weighing instrument is not available e The AD 8527 can transmit the data to any application such as Excel Word and Notepad for Windows e As power is supplied to the AD 8527 from the weighing instrument or USB no special power source is required e The AD 8527 has no data storage function To store data without using a personal computer use the AD 1688 Weighing Data Logger Note The AD 8527 is supplied power and is turned on only when it is connected to a weighing instrument or the USB of a personal computer 3 Unpacking When unpacking confirm that everything is contained AD 8527 Quick USB Adapter USB extension cable 0 5 m RS 232C cable with a D Sub 9 pin connector 1 m RS 232C cable with a D Sub 25 pin connector 1 m RS 232C cable with a 7 pin DIN connector 1 m Instruction manual this document Cap RS 232C c
4. 3 102 4 ld 4 gt MN Sheet1 Sheet2 Sheet3 B When the number of data on a line is 3 the ID number of samples and weight are input on one line X Microsoft Excel Book1 File Edit View Insert Format Tools Data Window Help A2 gt A B Cc D 6110 2009 10 41 24 123 56 ID Numberof Weight samples 9 Interval Mode e Inthe interval mode the weighing data is transmitted at a certain interval e Available intervals are 1 2 5 10 15 20 30 seconds 1 2 5 10 15 30 minutes 1 hour 1 Connect the AD 8527 to a personal computer using USB 2 Connect the AD 8527 to a weighing instrument using the RS 232C cable 3 Select the interval mode int for the out data transmission mode out of the function setting and set the interval int time 120 seconds in the example l msec Ic Uo Press the CANCEL key to return to the standby display OK In the interval mode the B mark turns gt on at the lower right 4 Set the data output mode of the weighing instrument to the stream mode For details on the setting procedure refer to the instruction manual of the weighing instrument 5 Press and hold the key for 2 seconds or more The AD 8527 starts to transmit the data Sr ven at a set interval out is displayed and the gt O ut gt mark flashes while the data is
5. AD 8527 Quick USB Adapter Instruction Manual 2009 A amp D Company Limited All rights reserved No part of this publication may be reproduced transmitted transcribed or translated into any language in any form by any means without the written permission of A amp D Company Limited The contents of this manual and the specifications of the instrument covered by this manual are subject to change for improvement without notice A amp D Company Limited 1WMPD4001958 Using the AD 8527 When operating this instrument be sure to observe the following A Caution e Do not open the case to repair the AD 8527 Only qualified personnel can do that Attempting repairs yourself may cause damage to the AD 8527 Damage caused by attempting to do the repair yourself will void the warranty Precautions on Usage AN Caution e With the cap attached over the connectors the AD 8527 is protected against water splashing equivalent to IP65 Please note that it will not endure immersion in water or high pressure running water e The AD 8527 is supplied power and is turned on only when it is connected to a weighing instrument or the USB of a personal computer 1 Introduction This manual describes how the AD 8527 works and how to get the most out of it in terms of performance Please read this manual completely before using the AD 8527 2 Features
6. T display the parameters When the CANCEL key is pressed or after 10 seconds of non operation the AD 8527 returns to the standby display 3 The parameter of the selected function appears The current setting has the gt mark at the lower right The flashing parameter can be changed e400 Current setting 4 Using the following keys to change the parameter key Display the parameters one by one CANCEL key Go to the next function without changes SET key Confirm the setting and go to the next function Virus After changes a buzzer sounds the parameter and the gt mark 102 appear for 1 second and then the next function appears gt 5 Press the CANCEL key to return to the standby display OK 8 2 Function List Function Description Baud rate bPS Parameter 600 1200 2400 4800 9600 19200 bps nn uuy e400 Data bit parity Parameter 7bit Even 7bit Odd 8bit None Number of data on a line This function is useful for storing data with different contents or items at the same time for example ID and number of samples in a counting scale When the number is set lt CR gt s of up to the setting are converted into commas Once the number of lt CR gt s is reached the setting a new line starts For example the ID number of samples and
7. able with a D Sub 9 pin connector RS 232C cable with a D Sub 25 pin connector RS 232C cable with a 7 pin DIN connector AD 8527 When the AD 8527 is in use the cap can be attached on the bottom Each side has an opening Use the openings as follows A Attach a strap to carry B Connect the cap and the main unit so that the cap will not be lost 4 Connection and Key Operations USB cable Personal computer C ie wW Q fe 5 D 2 fa S Weighing instrument connector AD 8527 When pressed Key To press and release immediately When pressed and held To keep pressing for 2 seconds or more Displays the date and Displays the function setting SET A time menus Starts or stops data transmission None at a set interval Only in the interval mode CANCEL None None 5 Displaying the Date and Time At the standby display press the SET key to display the year date and time 1 Standby display OK Press SET 2 The display indicates the year and date for 2 seconds each and then indicates the time DATE DATE H icib iB 48 3 Press any key to return to the standby display
8. ght are separated by tabs e g 6 10 2009 lt Tab gt 10 41 24 lt Tab gt 00123 45 lt Enter gt Example below is when the data is transmitted to Excel X Microsoft Excel Book4 File Edit View Insert Format Tools Data Window Help AG l A B Cc D 6 10 2009 10 41 24 123 45 6 10 2009 10 41 45 124 22 6 10 2009 10 42 11 123 25 6 10 2009 10 42 50 124 33 6 10 2009 10 43 34 123 54 H MI 4 A Sheet1 Sheet2 Sheet3 Selecting data to transmit Two ways of transmitting data are available weight values only or all data Transmitting weight values only is convenient when performing statistical calculations using Excel When performing GLP output transmitting all data is required For example the received data is ST 00123 45 g When transmitting weight values only is selected 00123 45 will be transmitted When transmitting all data is selected ST 00123 45 g will be transmitted 5 placed on one line as shown in B Example data received to transmit to Excel ID 000123 lt CR gt lt LF gt QT 00000056 PC lt CR gt lt LF gt ST 0003 102 g lt CR gt lt LF gt A When the number of data on a line is 1 the ID number of samples and weight are input on separate lines X Microsoft Excel Book ball File Edit Wew Insert Format Tools Data Window Help AS gt A B 5 D 1 6 10 2009 10 41 24 123 2 6110 2009 10 41 24 56 3 6 10 2009 10 41 24
9. s box d text service pi cause Ihis closes the 11 Specifications Devices Balances and scales with an to be connected RS 232C connector manufactured by A amp D Applicable OS Windows 2000 XP Vista Clock error 1 minute month Dedicated power supply Not required Power is supplied from a weighing instrument or a personal computer Operating temperature 5 C to 40 C Operating humidity 85 RH or less no condensation Dimensions 55x103x16 5 mm Mass Approximately 60 g Windows Explorer Excel Word and Notepad are registered trademarks of Microsoft Corporation 7
10. transmitted CER 6 To stop transmitting the data press and hold the key The mark stops flashing and turns on 6 10 Errors 10 1 Error Display Error Description Remedy y The supplied voltage Confirm that the USB is BA is low connected correctly The baud rate and Set the same values Er F n parity of the received for both the AD 8527 I data is different from and the weighing the set values instrument Internal clock error Err9 such as low backup Ask for repair battery 10 2 If the Data Fails to be Input into Excel Correctly If data is not input into Excel correctly when using Windows XP do as follows 1 Open Control Panel and then Regional and Language Options Control Panel File Edit view Favorites Tools Help T jl search Folders E cides Control Panel Bo a a i i gt ad E Phone and Power Options Printers afd Regional and Modem Faxes Language A Scannersand Scheduled Security Sounds and Cameras Tasks Center Audio Devices Options 2 Select the Languages tab and click on the Details button spot lod by deta To ital addtional languages box below d sight4e tl languages including E Instal fies lor East Asian languages ox Cancel 3 Select the Advanced tab and check the Tum off advanced text servise
11. weight are sent individually Using this function these three data items can be ALE nl po bt Pr I E e F o B n Number of data on a line Parameter 1 2 3 4 5 6 7 J es Me SS L inf sant ll patie Buzzer Parameter Sounds the buzzer Does not sound bEEP on gt of F Data transmission mode Parameter Standard mode All data Interval mode Bid Vite oul ALE rln When the interval mode is selected Interval time Parameter 1 2 5 10 15 20 30 60 120 300 600 900 1200 1800 3600 SEC vt psec d gt bd Data to transmit Parameter Weight values only All data with a header and unit Gn ay tYPE nubr ALL Date and time data Parameter Adds the date and time Does not add DATE DATE DATE p SEG Sa SEC Date format Note1 Parameter YMD MDY DMY DATE DATE DATE DATE ordr Yad ady dod Note 1 Set this function according to the setting of the personal computer used Factory setting About the number of data on a line interval mode data to transmit date and time data refer to the following sections 8 3 Data to Transmit Adding the date and time The date and time when the AD 8527 receives the data can be transmitted to a personal computer The date time and wei
Download Pdf Manuals
Related Search