DCN Next Generation System Installation
Contents
1. Cancel push button closes the dialogue box without carrying out any instructions specified in that dialogue box This applies to all dialogue boxes in System Installation Resetting the Installed list If you click on the Continue push button and there are already units with seat numbers the Reset Seat Numbers dialogue box appears This allows you to reset the Ynstalled list Doing so removes all seat numbers assigned to units so all seat numbers will have to be re assigned en 9 Reset Seat Numbers a xX Do you want the seat number list to be reset Figure 5 The Reset Seat Numbers dialogue box To reset the Installed list e Click on the Yes push button The seat numbers assigned to every unit on the list will be removed and the Installed list will be empty The Select Unit push button is enabled The Number of Unit s without seat numbers will be updated If you do not want to reset the Installed list e Click on the Vo push button Installation will continue When you exit the Reset Seat Numbers dialogue box you will be in install mode and can therefore proceed with assigning seat numbers Assigning seat numbers to numberless units To assign seat numbers to all numberless units in the hall you do not have to specify which unit you wish to a assign a seat number to e Click on the Select Unit push button i Note2. Keyboard Options Save Commands Channel Save As Tests Procedures Delete Glossary Print Using Help Exit About 3 2 Assignment seat numbers From the main window of System Installation you can assign seat numbers to delegate and chairman units The System Installation software checks for the physical presence of such units and compiles a list of all units present The number of units without seat numbers will be displayed in front of the text Unit s without Seat Numbers If you are working with a new installation file then all units will be without seat numbers i Note It is also possible to manually assign and change contribution unit seat numbers by means of the microphone button on the units The number of units without seat numbers is automatically updated under the following conditions e When the seat list is reset e When the Insert push button is pressed e When the number of delegate or chairman units physically connected to the system is altered Seat numbers can be assigned to units with or without existing numbers Seat numbers are always assigned from install mode i Caution If seat numbers are being assigned during a conference all active modules except System Installation and Delegate Database will stop functioning and no new modules may be started from the Startup main menu 3 2 1 Accessing install mode The main window has two possible states e
3. dialogue box Channel assignments are carried out from this window The breakdown of channels is as follows e Channel 0 is permanently assigned to floor e Channels 1 to 22 can be assigned to interpretation e Channels 23 to 26 can be assigned to intercom or interpretation e Channels 29 can be assigned to delegate loudspeakers or interpretation e Channel 30 can be assigned to intercom or interpretation e Channel 31 can be assigned to ring and busy tones and interpretation Channels are assigned by moving the slider control on the right of each scroll bar Channel assignments are mutually dependant and should be carried out from left to right To assign channels Bosch Security Systems B V 2005 January 9922 141 70462 e Drag the Ynterpret slider control to the required position e Repeat for Intercom The text occupying the lines assigned to interpretations will change to Interpret Once all channel assignments have been carried out e Click on the OX push button The program returns to the main window Any changes made to channel assignments will only be saved when you exit install mode by clicking on the Stop push button 3 3 2 External Contact In system installation the function of the external contact of the Concentus and the DDI can be defined This contact is the same contact as used for the intercom handset Refer to the User and Installation manual how to connect th
4. The select unit button is only enabled when there are still units connected to the system without seat numbers or when a selection has been made in the Installed list box oog1 i Figure 6 The Select Unit button and Seat text box Seat The program selects a unit in the hall without a seat number The LEDs and microphone of the selected unit become active Bosch Security Systems B V 2005 January 9922 141 70462 i Note This selection is based on the installation code of the units As this code is not visible the selection may appear random In the Seat text box below the Select Unit push button a number will appear This number consists of four alphanumeric characters numbers or letters This is the next available free seat number i Note If you are using a new installation file this number will always be 0007 A You can also select a unit to receive a seat number without using the Select Unit push button This is done from the conference hall itself by pressing the microphone button on the numberless unit Under normal conditions there is no need to change the system proposed seat number It is however possible to do so Changing newly assigned seat numbers This option allows you to change the seat number proposed by the system e Type the desired seat number over the existing one e Click on the arrow shaped nsert button i Note You can u
5. 3 8 Exiting system installation 16 Temporarily exiting System Installation 16 Permanently exiting System Installation 16 Bosch Security Systems B V 2005 January 9922 141 70462 en 4 1 System Installation 1 1 About system installation 1 1 1 What is System Installation The System Installation software module is one of a family of modules designed for controlling and monitoring conferences and discussions using the contribution equipment The System Installation program registers the physical presence of microphones and delegate units in a conference hall and supply this information to the system This information is vital for certain other modules e g Synoptic Microphone Control Without the installation information these modules cannot function properly System Installation is basically a preparation program Once all contribution units have been initialized from the system for more information refer to the DCN Next Generation Installation and User Instructions and assigned seat numbers and the audio channels configured and tested there will be no need to use System Installation for day to day monitoring and controlling of a conference However if the physical layout changes in the conference hall delegate units are removed or added for example then the data in System Installation must be updated System Installation offers the following possibilities e Assigning seat numbers to units w
6. Permanently exiting System Installation If you wish to exit System Installation completely e Select the File menu and click on Exit If you have requested to exit before saving an installation file that has changed a warning message with the following text is displayed Changes have been made to lt filename gt Do you want to save e Click on the Yes push button to save the changed installation file and exit the program e Click on the Vo push button to exit without saving the changed installation file e Click on the Cancel push button to return to the main window without exiting You can also exit the System Installation program by clicking on the close button in the far top right corner of the window Note By closing the Startup program all applications including System Installation will close Bosch Security Systems B V 2005 January 9922 141 70462 DCN Next Generation System Installation Bosch Security Systems B V 2005 January 9922 141 70462 DCN Next Generation System Installation Bosch Security Systems B V 2005 January 9922 141 70462 For more information please visit www boschsecuritysystems com 2005 Bosch Security Systems B V Data subject to change without notice January 2005 9922 141 70462
7. facility itself plus an index and a glossary of terms All information contained in this user manual is also found in the Help facility The Help facility contains the following options e Index e Keyboard e Commands e Procedures e Glossary e Using Help e About System Installation 2 2 2 Index To access the index e Select the Help menu and click on Index Bosch Security Systems B V 2005 January 9922 141 70462 A full list of subjects covered by the help facility is given in alphabetical order For more information on any subject contained in the index e Click on the required subject in the index An on screen page with the requested information will appear 2 2 3 Keyboard This gives information on which keys on your keyboard can be used with the software This includes using keys to activate menu items to move around in dialogue boxes for short cuts and to select options from the main window To access the Keyboard help facility e Select the Help menu and click on Keyboard A list of different key types is given For more information on any key type contained in the list e Click on the required key type in the list An on screen page with the requested information will appear 2 2 4 Commands This gives information on all menu options covering the File Edit View Settings and Help menus To access the Commands help fac
8. file under a different name By doing so the original file remains unaltered and the modified file is saved under the new name To do so e Select the File menu and click on Save As Bosch Security Systems B V 2005 January 9922 141 70462 The following dialogue box aude Current Name Room 50 1 New Name Figure 13 The Save As dialogue box This dialogue box contains a text line giving the current name of the file and a text box for entering the installation file name When the Save As dialogue box opens a text insertion point is already in the text box and you can type a name up to 12 characters long e Type the new file name in the text box e Click on the OX push button If a valid file name has been typed in it appears in the title bar at the top of the window If you have typed an invalid filename illegal characters a warning message with the following text is displayed Invalid filename e Click on the OX push button The dialogue box returns and a valid name can be typed in If you have typed a filename that already exists in a warning message with the following text is displayed A file already exists with this name e Click on the OX push button The dialogue box returns and a valid name can be typed in Deleting an installation file If you wish to delete a redundant installation file e Select the File menu and click on D
9. units cannot be initialized using System Installation For details of initialization please refer to the DCN Next Generation Installation and User Instructions E Installation Room 50 1 a o File Settings System Config Download Font Help Install mode Installed stop Delete 0 Units without Seat Numbers Select Unit Seat Figure 3 The System Installation main window In the title bar at the top of this window the installation file name is displayed If an installation file was selected from the main menu of the Startup program this file will be opened and the name of this file will appear in the title bar If no file was specified in Startup only the word Installation will appear in the title bar and no file will be open The main window contains the following elements e Install Mode push button and text Unit s without seat numbers text and number e Select Unit push button e Seat text box e Delete and Insert push buttons e List box of installed seats The menu bar All menu options referred to in this user manual are contained within the menu bar located underneath the title bar at the top of the main window Access to drop down menus is gained by clicking on the menu title displayed in the menu bar en 8 The full list of menu options is as follows File Settings System Download Help Config Font New Channel Index Assignment Open
10. Channel Tests Generator into Channel ro 16 On oi scar 2 18 ee r3 19 4 m 20 45 21 6 2 7 23 8 24 BE 25 10 26 mi fe 12 m 26 m13 C29 14 T 30 Cancel Figure 9 The Channel Tests dialogue box Mis Fs Bosch Security Systems B V 2005 January 9922 141 70462 i Note Channels assigned to intercom cannot be tested are therefore not active in the Channel Tests dialogue box The numbers and check boxes of these channels are grayed There is a box containing 32 check boxes one for each channel To specify which channels have to receive a test tone e Click on the box es of the channel s to receive a test tone A Vwill appear in each selected box indicating that channel is to be tested Once all channels have been selected e Click on the On radio button situated under the text Generator A test tone is sent to all selected channels To stop the test tone e Click on the Off radio button situated under the text Generator To save the settings in this dialogue box e Click on the OK command button 3 4 Accessing System Configuration information This function provides you with a list of the number and type of every unit connected to the Central Control Unit CCU To access the list e Select the System Config option from the main menu bar The following dialogue box appears xi Delegate Un
11. DCN Next Generation VAN System Installation The DCN Security Systems en Software User Manual LBB 4185 00 BOSCH About this manual This user manual is divided into three chapters Chapters 1 and 2 provide background information and chapters 3 provides detailed user information as follows e Chapter 1 System Installation containing a brief overview of the Digital Congress Network Next Generation a summary of the application modules available and an overview of the functionality of the System Installation application e Chapter 2 Getting Started containing details of how to start the System Installation application from the Startup screen and a description of the Help facility e Chapter 3 Using System Installation containing details about assigning and working with seat numbers configuring channels printing working with installation files and how to exit System Installation Manual conventions For clarity this user manual uses consistent styles symbols and typographical conventions They are i General notes are contained within rules and indicated with this symbol at the left margin Notes are used to draw attention to special actions or information Caution A caution is contained within rules and indicated with this symbol at the left margin Cautions are used to draw attention to actions or commands that could lead to a loss of information or damage to equipment Tip A tip is cont
12. Ifthe program is in install mode the push button beneath the Ynstall Mode text will say Stop While in this mode all conferencing activities are suspended You can select units without seat Bosch Security Systems B V 2005 January 9922 141 70462 numbers and insert them into the Ynstalled list and remove seat numbers from the Ynstalled list You can also carry our channel assignments and access the System Configuration window and Help menu Clicking on the Stop push button restarts conferencing activities offers the option of saving changes to the current installation file and causes the program to exit install mode e Ifthe program is not in install mode the push button beneath the Ynstall Mode text will say Start You can create retrieve save delete and print installation files and access the System Configuration window and Help menu You can also enable the Download Font function Assigning seat numbers can only be carried out in install mode If you are not already in install mode e Click on the Start push button The following dialogue box appears x All conference activities will be stopped and reset when Install Mode is initiated Figure 4 The Warning dialogue box e Click on the Continue push button to proceed e Click on the Cancel push button if you do not wish to enter install mode i Note Clicking on the
13. To print all seat numbers e Click on the Seat Numbers check box A V will appear in the box indicating this function is enabled To print all channel assignments e Click on the Channel Assignment check box A V will appear in the box indicating this function is enabled Note These functions are not mutually exclusive so it is possible to specify both Seat Numbers and Channel Assignments If neither of the above options are selected the information printed consists of the installation file name and the system configuration data To define the number of copies e Select the Number of Copies field and type in the required number i Note The up and down arrow buttons on the right hand side of this field can be used to scroll to the required number The maximum number of copies that can be printed Is nine When you have specified all print parameters e Click on the Print push button The selected information will be printed en 16 3 8 Exiting system installation Temporarily exiting System Installation It is possible to temporarily leave System Installation without closing it down completely To do so e Click on the minimize button situated at the top right of the application window The System Installation program will become iconized in the Windows taskbar To re enter System Installation e Click on the System Installation module in the taskbar
14. Type the desired installation file name in the text box e Click on the OX push button If a valid file name has been typed in a new installation file opens whose name appears in the bar at the top of the window If you have typed in a file name that already exists a warning message with the following text is displayed A file already exists with this name e Click on the OX push button The dialogue box returns and a valid name can be typed in Opening an existing installation file To open an existing installation file e Select the File menu and click on Open The following dialogue box appears Current Name Name Cancel Figure 12 The Open dialogue box This dialogue box contains a list box for selecting the installation file name The name of the installation file currently open is also displayed When the Open dialogue box opens a list box appears with all installation files currently available If the list contains more names than can be displayed a scroll bar is provided To open an installation file e Click on the name in the list e Click on the OX push button Saving an installation file This allows you to save the current installation file To do so e Select the File menu and click on Save The current installation file will be saved Saving an installation file under a new name This allows you to save the current installation
15. ained within a box and indicated with this symbol at the left margin Tips are used to provide supplementary information that may make an action quicker or easier to carry out e An action to be carried out by the user is shown with a larger round bullet mark Typographical conventions The following typographical conventions text styles are used in this manual e Typed input information to be typed in using the keyboard is shown as Filename e Single key input via a single key or keys on the keyboard is shown as lt enter gt lt shift gt etc e Multiple keys input via a combination of keys pressed together is shown as lt ctri gt lt p gt lt alt gt lt f4 gt Screen text information that appears on screen is shown as Choose Startup Modules Hyperlinks This manual is also available as a digital document in the Adobe Portable Document Format PDF All references to pages figures tables etc in this digital document contain hyperlinks to the referenced location en 3 Table of contents 1 System Installation ssssssnsusnunnununnunnnnnnnunnnnnnnnnnnnnenans 4 1 1 About system installation eect 4 1 1 1 What is System Installation sses 4 2 Getting Started ssssussunnusnunnuonunnuonunnuonunnunnunnnnnunnnnnnns 5 2 1 Starting System Installation sesser 5 2 1 1 The Startup screen ou eeesseesseesseeeseeesseseneeeees 5 Selecting an installation and a names file 5 The Sys
16. details of participating delegates Names files are created using the Delegate Database software LBB 4180 The software modules may be started up from the Startup main window without specifying either an installation or names file However some software en 5 modules will not run without the appropriate installation or names file You can specify an installation file from the Startup main window or from the System Installation program If an installation file has been specified from Startup it is still possible to work on other installation files once in System Installation System Installation does not make use of the information in the names file i Note If system installation is in install mode all conference activities are suspended refer to paragraph 3 2 1 Selecting an installation and a names file For details on selecting an installation and a names file please refer to the Startup user manual LBB 4190 acl The System Installation icon For details on the System Installation icon and how to start System Installation from Startup please refer to the Startup user manual LBB 4190 2 2 Using Help 2 2 1 The Help menu The Help menu in the title bar contains commands for an on screen help facility This help facility contains information on all commands in the ile menu on which keyboard keys are functional a description of how to use the software information on how to use the help
17. e external contact lil Note The external contact can only be setup from install mode To setup the external contact functionality e Select the Settings menu and click on Option The following window appears TA Ss External contact No function C Present C Fraud Figure 8 External contact Dialog Cancel No Function The external contact has no function Present The external contact replaces the present key of the delegate unit For example a fingerprint reader can than be connected to the external contact to register present All delegates have to activate the external contact before actually casing a vote Only delegates that activated the external contact will count en 12 Fraud All delegates have to press both the present key at the delegate unit and simultaneously the fraud switch before actually casting a vote Only delegates that pressed both keys simultaneously will count The function of fraud is that one delegate needs both hands to cast a vote and therefore cannot vote simultaneously at two delegate units 3 3 3 Testing channels This option allows you to send a test tone to one or more channels i Note Testing channels is not possible in install mode Note To test channels no other application module should be open To do so e Select the Settings menu and click on Channel Tests The following dialogue box will be displayed E xl
18. elete Bosch Security Systems B V 2005 January 9922 141 en 15 The following dialogue box aude Room SO 1 alll E Room S0 Delete Cancel Figure 14 The Delete dialogue box This dialogue box contains a list box for selecting the installation file to be deleted If the list contains more names than can be displayed a scroll bar is provided To delete an installation file e Click on the name in the list e Click on the Delete push button Another dialogue box will appear with the text Are you sure you want to delete file lt filename gt If you still want to continue e Click on the OA push button The file is deleted and you return to the main window i Note You cannot delete the currently active installation file 3 7 Printing It is possible to print a hard copy of the current installation file You can also specify certain parameters relating to the printing of the dialogue boxes Note Printing is only possible when the system is not in install mode To do so e Select the File menu and click on Print 70462 The following dialogue box appears Print l Seat Numbers Zl Channel Assignment Number of copies iF Cancel Figure 15 The Print dialogue box This dialogue box contains check boxes for printing seat numbers and or channel assignments and a field for entering the number of copies required
19. he following warning message appears All conference activities will be stopped and reset when downloading is started e Click on Continue to download fonts Downloading may take several minutes for large font sets such as Chinese 3 6 Working with installation files If you wish to use an existing installation file or open a new one the File menu includes commands for doing so Note Only the Exit option in the File menu is active when the system is in install mode Bosch Security Systems B V 2005 January 9922 141 70462 The File menu has commands for e Opening a new installation file e Opening an existing installation file e Saving an installation file under its current name e Saving an installation file under a different name e Deleting an installation file e Printing e Exiting the System Installation program i Note Exiting the System Installation program is covered in Exiting System Installation in paragraph 3 8 Printing is covered in paragraph 3 7 Creating a new installation file To create a new installation file e Select the File menu and click on New The following dialogue box appears Cancel Figure 11 The New dialogue box This dialogue box contains a text box for entering the file name When the New dialogue box opens there is a text insertion point in the text box You can type a name up to 12 characters e
20. ility e Select the Help menu and click on Commands A list of menu groups is given For more information on any menu group contained in the list e Click on the required menu group in the list A list of options in the selected menu group is given For more information on any option contained in the list e Click on the required option in the list An on screen page with the requested information will appear 2 2 5 Procedures This gives information on how to use the software To access the Procedures help facility e Select the Help menu and click on Procedures A list of topics is given For more information on any topic contained in the list e Click on the required topic in the list A list of options for the selected topic is given For more information on any option contained in the list en 6 e Click on the required option in the list An on screen page with the requested information will appear 2 2 6 Glossary To access the glossary e Select the Help menu and click on Glossary A list of terms used in the help facility is given in alphabetical order For more information on any term contained in the glossary e Click on the required subject in the index A window with the requested information will appear 2 2 Using Help This gives information on how to use the help facility To access the Using Help facility e Select the Help menu and c
21. it Interpreter Desk Figure 10 The System Configuration dialogue box The dialogue box contains a scrollable list of all units connected to the system Each unit is represented by a number and a description of the type of unit The en 13 different types of units are e Delegate Unit e Delegate Unit with LCD e Chairman Unit e DDI Dual Delegate Unit e DDI Single Delegate Unit e DDI Chairman Unit e Ambient Microphone e Entrance Unit e Exit Unit e Interpreter desk e Voting unit e Data Distribution Board e Audio Expander e Transmitter 4 channels e Transmitter 8 channels e Transmitter 16 channels e Transmitter 32 channels If any of these units are not present in the system they will not be included in the list 3 5 Downloading font sets The Download Font option downloads font sets used by the Windows operating system on the control PC to correctly display texts on the LCD screens of contribution units that have a graphic display This is only necessary for languages that do not use the standard Western European and U S alphabet It must be done once for new systems Contribution units connected afterwards will need a new download when not already equipped with the new font set You will be asked to download immediately or later A new font download is also required if the font set of the control PC is changed To download the PC font set e Select the Download Font menu bar option T
22. ithout numbers e Changing already assigned seat numbers e Configuring the audio channels e Configuring the external contact e Opening closing saving editing and deleting installation files e Sending test signals down the audio channels e Printing information concerning System Installation Bosch Security Systems B V 2005 January 9922 141 70462 2 Getting Started 2 1 Starting System Installation 2 1 1 The Startup screen The System Installation program is started from the Startup screen shown below Bosch DCN Next Generation Startup loj x File Global Settings System Config Help Room 50 1 Finance Current Installation File Current Names File o B Synoptic Interpret Databaze a Instal 1 A Parliarn Multi Attendance Intercom Message A Display Video CamControl Figure 1 The Startup screen i Note For starting the Startup program from an icon in the desktop refer to the Startup user manual The software uses two user created files that contain important information about the installed hardware configuration and about delegates names These files are e Installation file containing information about channel assignment and the numbers that have been assigned to all microphones connected to thesystem These seat numbers are assigned using this software module e Names file containing information about the name seat number and other conference and personal
23. licate seat number in the Seat box is highlighted and can be altered If the new seat number is both valid and unique then it will be inserted into the list box in the appropriate place all items in the list box are displayed in numerical order from 0001 to ZZZZ The Insert push button will be disabled Deleting an item on the Installed list This option allows you to remove an item from the Installed list Each item on this list is represented by the four character alphanumeric seat number assigned to a unit Deleting an item on this list removes the seat number assigned to that unit To do SO e Click on the item in the list you wish to delete e Click on the Delete push button The item will be deleted the unit seat number removed and the Number of Unit s without seat numbers increased by one Bosch Security Systems B V 2005 January 9922 141 70462 Changing the seat numbers of already assigned units To do so e Inthe Ynstalled list box click on the name of the unit whose number you wish to change e Click on the Select Unit push button i Tip You can also select a unit for seat number changing without using the Select Unit push button This is done from the conference hall itself by pressing the microphone button on the appropriate unit In the Seat text box the seat number of the selected unit will appear To edit this number e Type the new
24. lick on Using Help A list of topics is given For more information on any topic contained in the list e Click on the required topic in the list A list of options for the selected topic is given For more information on any option contained in the list e Click on the required option in the list An on screen page with the requested information will appear Bosch Security Systems B V 2005 January 9922 141 70462 DCN Next Generation System Installation 2 2 8 About This provides software release information To display the About window e Select the Help menu and click on About System Installation The following window appears About x BOSCH system Installation LEB4185 Se Digital Congress Network Next Generation Helease x x This software package iz distributed by Bosch Security Systeme B W Copyright Robert Bosch GmbH 200 All rights are reserved Reproduction in whole orin part i prohibited without the prior written consent of the copyright ovwner Figure 2 The About window To remove this window Click on the OK push button Bosch Security Systems B V 2005 January 9922 141 70462 3 Using System Installation 3 1 The system installation main windows The System Installation main window is used to assign seat numbers and to provide access to the other dialogue boxes of the System Installation program i Note The contribution
25. se the up and down arrows to the right of the Seat text box to scroll through the available seat numbers Note This number must be both valid and unique otherwise you will not be able to insert the seat number into the Installed list Inserting new seat numbers Once the required seat number has been specified you must insert it into the Installed list e Click on the arrow shaped Ynsert push button en 10 Tip This button is only enabled when there is a seat number to insert The system performs two checks on the new seat number Validity The seat number must consist of four alphanumeric characters If not the following message appears Invalid seat number e Click on the OX push button The message disappears Highlight the invalid seat number by dragging the cursor across it and then type in a new seat number Uniqueness If the seat number already exists the following message appears The seat number entered is already assigned to another unit Do you want to replace the seat number e Click on the Yes push button to replace the seat number The message disappears When you next select a unit the seat number you wish to replace will be removed from the Ynstalled list and will appear in the Seat box Clicking on Ynsert assigns this seat number to a new unit e Click on the No push button to continue without replacing the seat number The dup
26. seat number over the old one e Click on the arrow shaped Ynsert button If you have completed seat number assignments and do not wish to configure audio channels e Click on the Stop button If you have made changes to the current installation file a warning message with the following text is displayed Changes have been made to lt filename gt Do you want to save e Click on the Yes push button to save the changes to the current installation file before exiting install mode e Click on the No push button to exit install mode without saving changes to the current installation file e Click on the Cancel push button to remain in install mode 3 3 Configuring channels and external contact 3 3 1 Channel assignment The System Installation program also allows you to assign functions to the audio channels in the system There are a total of 32 audio channels numbered 0 31 with the first channel always reserved for floor These channels can be divided up en 11 Note Channel assignments can only be carried out from install mode To access the channel assignments window from install mode e Select the Settings menu and click on Channel Assignments The following dialogue box appears x Distribution Contribution Channels intercom O Delegate Loudspeakers Ring amp Busy Tones Cancel w M Figure 7 The Channel Assignments
27. tem Installation ICON 5 2 2 USME TC Pessano 5 221 The Help Men nressennreni ennnen enana 5 DZD OCK o A E NE 5 223 Keyboard cne at 6 DD COMMAS ciuu aa 6 22 9 Proced re S necia 6 220 OSSA iana aan ass 6 22 7 Usno Hel rsa 6 2 2 8 ADOUl a E a 7 3 Using System Installation cesses 8 3 1 The system installation main windows 00 8 3 2 Assignment seat NUMbETSS c cette 8 3 2 1 Accessing install MOC eee 8 Resetting the Installed list eseese 9 Assigning seat numbers to numberless units 9 Changing newly assigned seat numbers 10 Inserting new Seat NUMDEFNS ceeeeeeeeeee 10 Deleting an item on the Installed list 10 Changing the seat numbers of already assigned UNITS ustactusnnenairan anain aa 11 3 3 Configuring channels and external contact 11 3 3 1 Channel assignment sessssssssesessrsrensrrrrsrrrenrnsnns 11 39 2 External CONLAC tinsi iar 12 INO TUN CW Ol caran N 12 PSG lil essere are Nee aes eee tte 12 Frada O eats 12 3 3 3 Testing channels ssssssessssssssssnsnsnsnsnsnsnsnenennnrnennnnas 12 3 4 Accessing System Configuration information 13 3 5 Downloading font Sets cesses 13 3 6 Working with installation files eee 13 Creating a new installation file eee 14 Opening an existing installation file 14 Saving an installation file eee 14 Saving an installation file under a new name 14 Deleting an installation file eect 15 Bil PINUNO iiser ee E 15
Download Pdf Manuals
Related Search