FM/AM Clock Radio - CNET Content Solutions
Contents
1.2. back to the previous laa track Locate a point while listening to the sound PPI forward or FE backward while playing and hold it until you find the point Locate a point while PPI forward or observing the display HE backward in pause and hold it until you find the point Go back to the previous MENU menu Select a menu item or a t y track for playback Execute the selected menu ENTER or begin playback During playback this operation goes back to the beginning of the current track To go back to the previous track press twice These operations are available only when using the supplied remote commander Notes When placing or removing the iPod hold the iPod at the same angle as that of the connector on this unit and do not twist or bend the iPod as connector damage may result Do not carry the unit with an iPod set on the connector Doing so may cause a malfunction When placing or removing the iPod hold the Docking Tray securely with one hand and take care not to press the controls of the iPod by mistake Before disconnecting the iPod pause playback To use the unit as a battery charger You can use the unit as a battery charger Charging begins when the iPod is connected to the unit Charging status appears in the iPod display For details see the user s guide of your iPod 1 Perform steps 1 to 8 in To set the alarm 2 Press ALARM TIME SET A or B
3. by pressing BRIGHTNESS TIME ZONE High default Middle gt Low 1 Playing the radio Manual tuning 1 Press RADIO BAND to turn on the radio and select the AM or FM band 2 Press TUNING or to tune in toa desired frequency 3 Adjust the volume using VOLUME or Tuning in to a station The unit automatically scan AM or FM stations 1 Press RADIO BAND to turn on the radio to select the AM or FM band 2 Press and hold TUNING or scans upward through the frequency bands scans downwards through the frequency bands Scanning starts from the currently tuned frequency When a station is received scanning stops 3 Adjust the volume using VOLUME or Preset tuning You can preset 20 stations for FM and 10 stations for AM Presetting a station 1 Follow steps 1 and 2 in Manual tuning to tune the frequency you wish to preset 2 Press and hold DISPLAY MEMORY for at least 2 seconds 3 Press PRESET or to select the preset number then press DISPLAY MEMORY The frequency is stored with the selected preset number Example The following display appears when you preset FM 105 8 MHz to preset number 1 for FM VA Sly LIENT Qa ANN W TT LI J RADIO FM The display shows the frequency for about 10 seconds and then returns to the current time To preset another station repeat these steps Note If you try to store another station with the same pr
4. 8 MHz 0 1 MHz AM 530 1710kHz 10kHz General Speaker Approx 3 8 cm 1 2 inches dia 8 Q Input AUDIO IN jack 3 5 mm stereo minijack Power output 0 8 W at 10 harmonic distortion Power requirements 120 V AC 60 Hz For clock back up 3V DC one CR2032 battery Dimensions Approx 115 x 124 7 x 97 1 mm w h d 4 is x 4 16 X 3 7 s inches not including projecting parts and controls Mass Approx 910 g 2 lb 0 09 oz including power supply unit Supplied accessories Remote commander 1 AM loop antenna 1 Audio connecting cable 1 Universal dock adapter for iPhone 1 Universal dock adapter for iPhone 3G 1 Design and specifications are subject to change without notice Compatible iPod models The compatible iPod models are as follows Update your iPod to use the latest software before you use it iPod nano 4th generation video iPod touch iPhone 3G 2nd generation iPod nano 3rd generation video iPod touch iPod classic iPod nano 2nd generation iPod 5th iPhone aluminum generation video iPod nano 1st generation iPod 4th generation iPod 4th color display generation iPod mini Notes In these Operating Instructions iPod is used as a general reference to iPod functions on an iPod or iPhone unless otherwise specified by the text or illustrations e The connector of the unit is for sole use with an iPod If you use devices that do not match with the connector connect to th
5. Control High Mid Low Extendable Snooze system from 10 to 60 min Precautions e Play the unit on the power source specified in Specifications e To disconnect the AC power cord mains lead pull it out by the plug not the cord e The unit is not disconnected from the AC power source mains as long as it is connected to the wall outlet even if the unit itself has been turned off e Since a strong magnet is used for the speaker keep personal credit cards using magnetic coding or spring wound watches away from the unit to prevent possible damage from the magnet Do not leave the unit in a location near a heat source such as a radiator or airduct or ina place subject to direct sunlight excessive dust mechanical vibration or shock e Allow adequate air circulation to prevent internal heat build up Do not place the unit on a surface a rug a blanket etc or near materials a curtain which might block the ventilation holes Should any solid object or liquid fall into the unit unplug the unit and have it checked by qualified personnel before operating it any further To clean the casing use a soft cloth dampened with a mild detergent solution Never touch the wire of the external FM antenna during a thunderstorm Furthermore immediately disconnect the AC power cord from the radio NOTES ON LITHIUM BATTERY e Wipe the battery with a dry cloth to assure a good contact Be sure to observe the co
6. EP OFF or OFF ALARM RESET To change the sleep timer setting You can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has been activated To deactivate the sleep timer Press SLEEP repeatedly to set the sleep timer to OFF in step 2 Connecting external equipment To listen to sound 1 Connect the AUDIO IN jack of the unit to the line out jack or headphone jack of the external equipment using the audio connecting cable supplied yOO00 omililo AM ANTENNA AUDIO IN Audio connecting cable supplied To external lt 4 equipment 2 Press AUDIO IN to display AUDIO IN 3 Play the equipment connected to the AUDIO IN jack 4 Adjust the volume using VOLUME or To return to the radio Press RADIO BAND The frequency is shown in the display To return to the iPod Press iPod amp iPhone Pl To stop listening Press OFF and stop playback on the connected unit Notes Refer also to the connected equipment s manual The supplied audio connecting cable may not be used with some external equipment In this case use a cord suitable for the external equipment you are using e When you listen to the radio with external equipment connected turn off the connected equipment to prevent noise If noise occurs even when the equipment is turned off disconnect and place the external equipment away from the unit
7. RATION TO THE DURATION OF THIS WARRANTY us SOR BK wees Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state Sh ZS We X RK R DR PSA SBR z5 e S K S e K Bh NE IAD NEY ERIK Bx a X gt P KR EERE SHER 4 139 836 11 1 N sed es 8 pr Bee LZ R Xz RZ SKE Seow oS BOP S 7 OK z Bo S 2 res ee x Se Z SK S BCs Rene Se 2 By r Rd SES SER Se K RR RSN BEN zg S RRR RRR RR IERIE REEERE EEN EDEA EAV EAE PE X zy Co OE S a x SRC Sarees SNe ean RS BRS IRC ERRER EIKI R eon sy K Re X D455714503 This unit includes a preinstalled Sony Lithium battery CR2032 as back up power source for the clock which is preset to EST Eastern Standard Time at the factory And this battery is considered part of the product Owner s Record The model number and the serial number are located on the bottom Record the serial number in the space provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No ICF C7iP Serial No For customers who purchased this product in the
8. SONY FM AM Clock Radio Operating Instructions ICF C7iP DREAM MACHINE Dream Machine is a trademark of Sony Corporation O Made for Works with a iPod E iPhone NO POWER NO PROBLEM No Power No Problem is a trademark of Sony Corporation http www sony net 2009 Sony Corporation Printed in China ZERIKA EINE Ir IE I DIXIE I I BX RnR re Are RE Sox K SONY E ZZ Portable Audio Ro Z Be es U S Only ea Sed e u j B3 Sony Electronics Inc Sony warrants this product against defects in material or workmanship for the time SK periods and as set forth below Pursuant to this Limited Warranty Sony will at its option i repair the product L ax SoD using new or refurbished parts or ii replace the product with a new or refurbished product For purposes of this Limited Warranty refurbished means a product or part that has been returned to its original specifications In the event of a defect these are your exclusive remedies ris BSE ERE BX a X Marae L Labor For a period of one 1 year from the original date of purchase of the product Labor Warranty Sony will at its option repair or replace with new or refurbished product product determined to be defective If Sony elects to replace the product after this Labor Warranty has expired but while the Parts Warranty below is still in effect it will do so for the applicable labo
9. USA Please register this product on line at http www sony com productregistration Proper registration will enable us to send you periodic mailings about new products services and other important announcements Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification Thank you WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To reduce the risk of fire do not cover the ventilation of the apparatus with newspapers tablecloths curtains etc And do not place lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus Do not install the appliance in a confined space such as a bookcase or built in cabinet Do not expose the batteries battery pack or batteries installed to excessive heat such as sunshine fire or the like for a long time As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment CAUTION Danger of explosion if
10. battery is incorrectly replaced Replace only with the same or equivalent type CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to AN the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment
11. cessory or part not available from your authorized dealer call 1 800 488 SONY 7669 Repair Replacement Warranty This Limited Warranty shall apply to any repair replacement part or replace ment product for the remainder of the original Limited Warranty period or for ninety 90 days whichever is z E longer Any parts or product replaced under this Limited Warranty will become the property of Sony 3 Z This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary RE consumer use it does not cover product issues caused by any other reason including but not limited to product issues due to commercial use acts of God misuse limitations of technology or modification of or to any part of the Sony product This Limited Warranty does not cover Sony products sold AS IS or WITH ALL FAULTS or consumables such as fuses or batteries This Limited Warranty is invalid if the factory applied serial number has been altered or removed from the product This Limited Warranty is valid only in the United States R BEL Re sean v TE PRE LIMITATION ON DAMAGES SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT Xe K N DURATION OF IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IZ IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DU
12. d set the DST display manually as necessary Customers living in a country region that do not use daylight saving time summer time must cancel Automatic DST Summer Time adjustment before using the unit To activate Automatic DST Summer Time adjustment again press and hold CLOCK and SNOOZE DATE SLEEP OFF at the same time at least 2 seconds and On appear in the display to show that Automatic DST Summer Time adjustment has been activated The display returns to the clock Setting the clock manually 1 Plug in the unit 2 Press and hold CLOCK for at least 2 seconds The year starts to flash in the display 3 Press ALARM TIME SET or repeatedly to set the year 4 Press CLOCK 5 Repeat steps 3 and 4 to set the month day hour and minute and then press CLOCK The seconds start incrementing from zero Notes If you do not press any button for about 1 minute while setting the clock the clock setting will be canceled A calendar is installed in this unit When the date is set the day of the week is automatically displayed SUN Sunday MON Monday TUE Tuesday WED Wednesday THU Thursday FRI Friday SAT Saturday To display the year and date Press SNOOZE DATE SLEEP OFF once for the date and press it again for the year After a while the display will change back to the current time automatically Setting the brightness of the display Three levels of brightness are available
13. des and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over AC 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped For the state of california USA only Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Perchlorate Material Lithium battery contains perchlorate Features Wake or sleep to iPod Radio Dual Alarm FM AM 2 band digital synthesized tuner 30 Station Presets 20 FM 10 AM Brightness
14. e When you replace the battery do not disconnect the plug from the AC outlet Otherwise the calendar current time alarm and station presets will be initialized CR2032 If the time in the display is incorrect after the battery is changed Reset Press the Reset button with a pointed device The Reset button is in the small hole located near the battery holder e VOLUME o o o o o o SNOOZE DATE SLEEP OFF ALARM TIME SET Al QO iPod RADIO AUDIO IN BUZZER FM AM WAKE UP SLEEP XJ DREAM MACHINE oo0o00 o0o0oo ALARM RESET FM wire antenna ooo o Ooo o To fe ore O 00 BRIGHTNESS DISPLAY TUNING AUDIO IN CLOCK TIMEZONE MEMORY PRESET Setting the clock for the first time This unit is preset to the current EST Eastern Standard Time at the factory and is powered by a backup battery All you need to do the first time is just plug it in and select your time zone 1 Plug in the unit The current EST Eastern Standard Time appears in the display 2 Press and hold BRIGHTNESS TIME ZONE for at least 2 seconds Area number 2 flashes in the display 3 Press ALARM TIME SET or repeatedly to select the number as follows Area number Time zone 1 Atlantic standard Time 2 Eastern standard Time default setting 3 Central standard Time 4 Mountain sta
15. e AUDIO IN terminal of this unit with the supplied audio connecting cable Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using an iPod connected to this unit Connecting the antenna To connect the AM loop antenna The shape and the length of the antenna is designed to receive AM signals Do not dismantle or roll up the antenna 1 Remove only the loop part from the plastic stand 2 Set up the AM loop antenna 3 Connect the cords to the AM antenna terminals Cord A or cord B can be connected to either terminal Insert the cord while pushing down the terminal clamp Only insert up to here 4 Make sure the AM loop antenna is connected firmly by pulling softly Adjusting the AM loop antenna Find a place and an orientation that provide good reception Do not place the AM loop antenna near the unit or other AV equipment as noise may result Tip Adjust the direction of the AM loop antenna for best AM broadcast sound Preparing the remote commander Before using the card remote commander for the first time remove the insulation film See Fig FN DISPLAY MEMORY The Pll and VOL buttons have a tactile dot CR2025 When to replace the battery With normal use the battery CR2025 should last for about six months When the remote commander no longer operates the unit replace the battery wit
16. eset number the previously stored station will be replaced Tuning in to a preset station 1 Press RADIO BAND to turn on the radio and select the AM or FM band 2 Press PRESET or to select the desired preset number 3 Adjust the volume using VOLUME or Auto preset tuning 1 Press RADIO BAND to turn on the radio and select the AM or FM band 2 Press and hold RADIO BAND until AP appears in the display 3 Press DISPLAY MEMORY The unit automatically presets the available channels in order Improving the reception FM Extend the FM wire antenna fully to increase reception sensitivity AM Connect the supplied AM loop antenna to the unit Rotate the antenna horizontally for optimum reception Notes on radio reception Keep digital music players or mobile phones away from the AM loop antenna or the FM antenna as this may lead to reception interference e When you are listening to the radio with an iPhone connected to the unit interference with radio reception may occur When you are listening to the radio while charging an iPod interference with radio reception may occur Playing an iPod You can enjoy iPod audio by connecting to this unit To use an iPod refer to the user s guide of your iPod If you are using an iPhone or iPhone 3G attach the supplied universal dock adapter for iPhone or iPhone 3G before inserting into the connector The adapter number 2 or 49 is shown on the bott
17. h a new one See Fig FN Notes Do not attempt to charge the battery e If you are not going to use the remote commander for a long time remove the battery to avoid any damage that may be caused by leakage and corrosion About the backup battery To keep accurate time this unit contains a CR2032 battery inside of the unit as a backup power source The battery keeps the clock operating in the event of a power interruption Knowing when to replace the battery When the battery becomes weak CX appears in the display If a power interruption occurs while the battery is weak the current time and alarm will be initialized Replace the battery with a Sony CR2032 lithium battery Use of another battery may cause a fire or explosion Note If AM 12 00 flashes in the display when the unit is connected to AC outlet for the first time the battery may be weak In this case consult your Sony dealer Replacing the battery 1 Keep the AC plug connected to the AC outlet remove the screw that secures the battery holder at the bottom of the unit using a screwdriver and remove the battery holder See Fig E 2 Replace a new battery in the battery holder with the side facing up See Fig E 3 Insert the battery holder back into the unit and secure it with the screw See Fig E 4 Press iPod amp iPhone RADIO BAND AUDIO IN or SNOOZE DATE SLEEP OFF to turn c off in the display Not
18. ing the Buzzer Alarm 1 Perform steps 1 to 8 in To set the alarm 2 Press ALARM TIME SET A or B to select BUZZER alarm mode The setting is entered 3 If A or B does not appear in the display press ALARM TIME SET A or B again The buzzer will sound at the set time Note The volume cannot be set for the buzzer alarm To confirm an alarm time setting Press ALARM TIME SET or The setting will be displayed for about 4 seconds To change an alarm setting Press and hold ALARM TIME SET for at least 2 seconds to move the alarm time forwards Press and hold ALARM TIME SET for at least 2 seconds to move the alarm time back When you release the button the changed time will be displayed for about 2 seconds To change the alarm time again press ALARM TIME SET or within these 2 seconds otherwise the setting change will be fixed as displayed To doze for a few more minutes Press SNOOZE DATE SLEEP OFF The sound turns off but will automatically come on again after about 10 minutes You can change the snooze time by pressing SNOOZE DATE SLEEP OFF repeatedly within 4 seconds The maximum length of the snooze time is 60 minutes To stop the alarm Press OFF ALARM RESET to turn off the alarm The alarm will sound again at the same time the next day To deactivate the alarm Press ALARM TIME SET A or B to turn off the ALARM A or B indicator from the display Note on the alarm in the eve
19. into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation WARNING Replace the battery for the clock backup with a Sony CR2032 lithium battery and the battery for the remote commander with a Sony CR2025 lithium battery Use of another battery may present a risk of fire or explosion e Battery may explode if mistreated Do not recharge disassemble or dispose of in fire Dispose of used battery promptly Keep away from children Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two bla
20. ndard Time 5 Pacific standard Time 6 Yukon standard Time 7 Hawaiian standard Time 4 Press BRIGHTNESS TIME ZONE to set Note Though the clock is correctly set at the factory discrepancies may arise during transport or storage If necessary set the clock to the correct time by referring to Setting the clock manually When daylight saving time summer time begins This model automatically adjusts for daylight saving time summer time is displayed from the beginning of daylight saving time summer time and disappears at the end of daylight saving time summer time automatically Daylight saving time summer time begins at 2 00 AM on the second Sunday of March Standard time begins at 2 00 AM on the first Sunday of November To cancel Automatic DST Summer Time adjustment during the daylight saving time summer time period The Automatic DST Summer Time adjustment can be canceled Press and hold CLOCK and SNOOZE DATE SLEEP OFF at the same time at least 2 seconds while the clock is displayed and OFF appear in the display to show that Automatic DST Summer Time adjustment has been canceled The display returns to the clock Notes The change timing of Automatic DST Summer Time adjustment employed by the unit see above is subjected to variation by circumstances and the law in each country region In such a case cancel the Automatic DST Summer Time adjustment an
21. nt of a power interruption In the event of a power interruption the alarm will work until the battery is totally discharged However certain functions will be affected as follows The backlight will not light up e If the alarm mode is set to iPod or radio it will change to BUZZER automatically e Ifa power interruption occurs while the alarm is sounding the alarm will stop e If OFF ALARM RESET is not pressed the alarm will sound for about 5 minutes If appears in the display the alarm will not sound in the event of power interruption Replace the battery if X appears e The snooze function will not work During a power interruption the alarm will sound at the set time only once Setting the sleep timer You can fall asleep to the music etc using the built in sleep timer that turns off the unit automatically after a preset duration 1 Press SLEEP while the unit is turned on SLEEP appears and the sleep time flashes in the display 2 Press SLEEP to set the sleep timer duration Each time you press SLEEP the duration in minutes changes as follows 90 gt 60 gt 30 gt 15 OFF The display returns to clock mode for about 4 seconds after you have finished the duration setting and released SLEEP and then the sleep timer starts The unit will play for the duration you set and then shut off To turn off the unit before the preset time Press SNOOZE DATE SLE
22. om rear of the supplied universal dock adapters is for the iPhone and is for the iPhone 3G Check the adapter number before use Universal dock adapter Notes When inserting an iPod into the unit be sure to use the universal dock adapter supplied with your iPod or commercially available from Apple Inc The connector of the unit is exclusively for use with an iPod If you use a device that does not match the connector connect it to the AUDIO IN terminal of this unit with the supplied audio connecting cable Sony cannot accept responsibility in the event that data recorded on an iPod is lost or damaged when using an iPod connected to this unit e For details of environmental conditions for operating your iPod check the website of Apple Inc 1 Press PUSH OPEN The Docking Tray is ejected halfway 3 Attach the adapter for your iPod iPhone 4 Insert your iPod iPhone into the connector of the unit 5 Press iPod amp iPhone Pl The iPod begins to play automatically You can operate the connected iPod by this unit or the iPod buttons 6 Adjust the volume using VOLUME or To Press On copyrights iPod is a trademark of Apple Inc registered in the U S and other countries e iPhone is trademark of Apple Inc e All other trademarks and registered trademarks are of their respective holders In this manual and marks are not specified Setting the alarm This clock radio is eq
23. r charge Parts For a period of one 1 year from the original date of purchase of product Parts Warranty Sony will supply new or refurbished replacement parts in exchange for parts determined to be defective This Limited Warranty covers only the hardware components packaged with the Product It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product any such software is provided AS IS unless expressly provided for in any enclosed software Limited Warranty Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software Instructions To obtain warranty service you must deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection to the Sony authorized service facility specified It is your responsibility to backup any data software or other materials you may have stored or pre served on your unit It is likely that such data software or other materials will be lost or reformatted during service and Sony will not be responsible for any such damage or loss A dated purchase receipt is required For specific instructions on how to obtain warranty service for your product Visit Sony s Web Site www sony com service Or call the Sony Customer Information Service Center 1 800 222 SONY 7669 For an ac
24. rrect polarity when installing the battery Do not hold the battery with metallic tweezers otherwise a short circuit may occur If you have any questions or problems concerning your unit please consult your nearest Sony dealer Troubleshooting Should any problem persist after you have made the following checks consult your nearest Sony dealer The clock flashes AM 12 00 due to a power interruption The battery is low Replace the battery Remove the old battery and install a new one The radio iPod or buzzer alarm does not sound at the preset alarm time Check that alarm A or alarm B is properly displayed The radio or iPod alarm is activated but no sound comes on at the preset alarm time Check the alarm volume setting There is no sound from the iPod Make sure the iPod is securely connected e Adjust the VOLUME The iPod cannot be operated with this unit e Make sure the iPod is securely connected The iPod cannot be charged Make sure the iPod is securely connected When daylight saving time begins the clock does not employ the daylight saving time automatically Make sure the clock is set correctly Press and hold CLOCK and SNOOZE DATE SLEEP OFF simultaneously for at least 2 seconds to activate the Automatic DST function Specifications iPod section DC out 5V MAX 500mA Radio section Frequency range Band Frequency Channel step FM 87 5 10
25. to select jPod alarm mode VOL appears in the display 3 Press ALARM TIME SET or to adjust the volume 4 Press ALARM TIME SET A or B The setting is entered 5 If A or B does not appear in the display press ALARM TIME SET A or B again The iPod will sound at the set time When using an iPod touch iPhone e To wake up to music stored in an iPod touch iPhone connect the iPod touch iPhone to the unit first follow the steps above to set alarm time and then select the music function e Even if the iPod alarm setting is complete if you turn the iPod touch iPhone power off before the unit the iPod alarm will not work B Setting the radio alarm 1 Perform steps 1 to 8 in To set the alarm 2 Press ALARM TIME SET A or B to select RADIO alarm mode VO appears in the display 3 Press ALARM TIME SET or to adjust the volume 4 Press ALARM TIME SET A or B Band FM or AM or flashes _ _ is the last station received 5 Press ALARM TIME SET or to select gt the desired band or If you select jump to step 8 6 Press ALARM TIME SET A or B The preset number flashes 7 Press ALARM TIME SET or to select the desired preset number The setting is entered 8 If A or B does not appear in the display press ALARM TIME SET A or B again The radio will turn on at the set time C Sett
26. uipped with 3 alarm modes iPod radio and buzzer Before setting the alarm make sure to set the clock see Setting the clock for the first time To Set the alarm 1 Press and hold ALARM TIME SET A or B for at least 2 seconds WAKE UP appears and the hour flashes in the display 2 Press ALARM TIME SET or repeatedly until the desired hour appears To cycle the hour rapidly press and hold ALARM TIME SET or Press ALARM TIME SET A or B The minute flashes Repeat step 2 to set the minute Press ALARM TIME SET A or B The days of the week flash Repeat step 2 to set the days of the week You can select the days from the following three options Every day SUN MON TUE WED THU FRI SAT Week day MON TUE WED THU FRI Week end SUN SAT 7 Press ALARM TIME SET A or B The alarm mode setting is entered 8 Press ALARM TIME SET or repeatedly until the desired alarm mode flashes You can choose one of 3 settings iPod RADIO or BUZZER Set the alarm mode as follows iPod see A Setting the iPod alarm RADIO see B Setting the radio alarm BUZZER see C Setting the buzzer alarm a uh W A Setting the iPod alarm Turn off the iPod OFF or press and hold iPod amp iPhone Pll iPod amp iPhone Pil To resume play press it again Pause playback Go to the next track gt gt Go
Download Pdf Manuals
Related Search