User`s Manual - Data Loggers
Contents
1. 2222 nn nn nnen en nn en nnn nn nnnnnnnnnnenenen On Back Important Notices and Disclaimers In order to properly use this product please carefully read this manual before using T amp D Corporation accepts no responsibility for any malfunction of and or trouble with this product or with your computer that is caused by the improper handling of this product and will deem such trouble or malfunction as falling outside the conditions for free repair outlined in the attached warranty All rights of this manual belong to T amp D Corporation It is prohibited to use duplicate and or arrange a part or whole of this User s Manual without the permission of T amp D Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation USA and are binding in the USA Japan and all other countries Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States Japan and or other countries All registered trademarks company names product names and logos mentioned herein or for products being used are the property of T amp D Corporation or of their respective owners Specifications design and other contents outlined in this manual are subject to change without notice Please follow the safety precautions outlined in the Manual carefully We cannot guarantee nor are we responsible for safety if this product is used in any manner other than was intended On scre2. Ic o L IMPORTANT By starting a new recording session all data currently saved in the Unit will be erased Even if the Unit is waiting for a programmed start by pressing the lt REC STOP gt button until the REC mark appears you can start a new recording session immediately Stopping Recording You can stop a recording session by pressing the lt REC STOP gt button until the REC mark disappears from the LCD display When it has disappeared recording has stopped DATA COM ENDLESS rir REC Mark disappears L LILI c 25 26 Setting Recording Interval lt INTERVAL gt Button You can make or change recording interval settings from the lt INTERVAL gt button on the front of the TR 71Ui 72Ui Unit IMPORTANT During recording or while waiting for a programmed recording to start you cannot make recording interval settings 1 Press in the lt INTERVAL gt button on the front of the Unit until the recording interval appears in the display 2 With each pressing of the lt INTERVAL gt button the recording interval time will change Press until the desired setting appears DATA ENDLESS DATA ENDLESS M 1 io D iC 1 fot 15 seconds 15 minutes 3 When the desired recording interval appears stop pressing the lt INTERVAL gt button Within a few seconds the current measurement readings will return to the display and the setting will be finished By pressing the lt INTE
3. Water Resistance IP67 TR 1106 meets IP68 Temperature Measuring Accuracy Avg 0 5 C 40 to 80 C Avg 1 0 C 60 to 40 C 80 to 100 C Avg 2 0 C 100 to 155 C Temperature Sensor for TR 71Ui 72Ui Unit mm TR 0106 TPE Resin Shielded Sensor Cable Length 0 6m a 7 Time to Thermal Constant In air about I 75 sec L 4 TR 0206 Screw down Sensor Cable Length 0 6m Time to Thermal Constant In air about 75 sec d TR 0306 Stainless Protection Sensor Cable Length 0 6m th Time to Thermal Constant In water EEE o o about 18 sec TR 0406 Stainless Protection Sensor Cable Length 0 6m ar si p Time to Thermal Constant In water a about 20 sec AN p TR 0506 Stainless Protection Sensor Cable Length 0 6m qo or Time to Thermal Constant In water _ I do 6 T 293 600 about 20 sec TR 0706 Stainless Protection Sensor 14 56 600 Cable Length 0 6m DL Time to Thermal Constant In water lt bd 6 6 about 18 sec Materials D Thermistor TPE resin TPE resin shielded wire M3 Crimp Terminal Compaction tube Stainless pipe SUS304 Stainless pipe SUS316 Temperature Measurement Range 40 to 110 C Sensor Temperature Durability 50 to 115 C Water Resistance Only the Stainless Pipe is Waterproof Temperature Measuring Accuracy Avg 0 3 C 20 to 80 C Avg 0 5 C 40 to 20 C 80 to 100 C 31 Temperatu
4. electrocution This device is designed exclusively to measure and record temperature and humidity Do not use it for any other purpose than to measure and record temperature and humidity 9 FORBIDDEN 9 FORBIDDEN gt CAUTION gt CAUTION gt CAUTION A CAUTION STRICTLY FOLLOW STRICTLY FOLLOW A CAUTION This Unit is not waterproof If the Unit gets dirty wipe it with a clean cloth and a mild detergent Harmful gases or chemicals may cause corrosion and or other danger to the Unit Also by coming in contact with hazardous substances harm may occur to the people handling the Unit Therefore do not use or store it in any environment that is exposed to chemicals and harmful gases Battery life varies depending upon the type of battery the battery performance and the ambient temperature in which it is used Battery terminals may provide insufficient contact due to age or vibration Condensation may occur when a Unit is moved from one environment to another where there is a great difference in temperature Use the Unit in an environment where the ambient temperature is from 10 to 60 C and the humidity is 90 RH no condensation or less To prevent damage to the Unit from static electricity remove static electricity from your body by touching metal around you door knob window frame before touching the Unit Static electricity may cause not only damage to the Unit but may cause break
5. recording in ONETIME mode will this be displayed Sensor Error This will be displayed when a sensor has not been connected has not been completely inserted or the wire has been broken Measurement and recording will continue so battery power will be consumed DATA Em ONETIME SLP Sleep Mode If the battery power becomes extremely low this message will appear on the LCD display When this appears recording has been stopped in order to save the already recorded data See Changing the Battery on page 22 and change the battery Nothing Appears If after going into sleep mode above the battery is further left unchanged the display will automatically shut off If that occurs all recorded data will be lost See Changing the Battery on page 22 and change the battery 20 Installing the Battery 1 Remove the battery cover form the back of the Unit 2 Insert one AA alkaline battery making sure that the and are in the correct direction Always use a new battery 3 Replace and close the battery cover 21 22 Changing a Battery IMPORTANT When using the TR 57DCi Data Collector to download recorded data via infrared communication while a battery life warning mark is on display infrared communication may be broken or may be impossible Besides the Unit s LCD display the battery level can be displayed on the computer screen via the software if a Unit is connected to the computer with
6. way a guarantee of your actual battery life When infrared communication function is enabled the estimated battery life will be about 7 months Battery Life Warning Display When the battery power becomes low a battery life warning mark will appear in the Unit s LCD display 13 Data Protection Function If the battery power becomes even lower after a battery life warning mark appears in the Unit s LCD display the Unit will automatically go into sleep mode in order to protect the data In sleep mode all normal operations will stop and it will become impossible to switch on the power of the Unit IMPORTANT If the Unit remains in sleep mode for about 2 months without a change of battery or if the battery is left out of the Unit for more than 2 minutes all recorded data will be lost Infrared Communication Function By placing the infrared port of the TR 57DCi and the TR 71Ui 72Ui Unit face to face it is possible to download the recorded data from the TR 71Ui 72Ui and store the downloaded data Current Readings Monitoring Display With our exclusive software you cannot only monitor the current measurements at a set interval but can view those measurements in a continually changing graph You can simultaneously display the current measurements and corresponding graphs for the number of Units you have connected 15 Recording Intervals Select from 15 recording intervals from 1 second to 1 hour to meet your needs Also there are tw
7. Length 1m 1000 _ CE if Materials D Vinyl Coated Electrical Wire IMPORTANT The extension cable cannot be used with the temperature humidity sensor TR 3110 Only one cable per sensor 33 34 Serial Communication Cable for TR 71Ui 72Ui TR 07C Serial Communication Cable Specialized Connector D sub9pin for communication with PC lt ame Cable Length 1 5m TR 4C10 Serial Communication Cable For communication with TR 57C RTR 57C Cable Length 1 0m ME TR 6C10 Serial Communication Cable For communication with TR 57DCi 57U and RTR 57U Cable Length 1 0m CC i aT Wall Attachment for TR 71Ui 72Ui TR 07K2 Wall Attachment Included Screw x 2 and Double sided Tape x 1 Compatible Devices TR 71Ui 72Ui Materials Polycarbonate 52 Unit mm 35 For product information or questions contact us at T amp D coRPORATION 817 1 Shimadachi Matsumoto Nagano JAPAN 390 0852 Fax 81 263 40 3152 E mail support tandd com Website http www tandd com We have opened an English Website for your convenience Here you can find information about our company news products upcoming events software and users manual downloads as well as other support Please stop by and see what we have to offer Thermo Recorder TR 71Ui 72Ui User s Manual Published by T amp D Corporation 3rd Edition Copyright T amp D Corporation All rights reserved This is printed on recyc
8. Manual x 1 16 Appearance Diagram and Part Names FRONT Infrared Port Thermo Recorder TR 71U A o 5 u o r D H3MOd A lt DISPLAY gt lt INTERVAL gt lt REC STOP gt Button Button Button DISPLAY Pressing this button will change the LCD display mode See p 27 INTERVAL Pressing this button enables you to make or change recording interval settings or view the currently set recording interval See p 26 REC STOP Pressing this button will start or stop recording See p 25 BACK S Battery Cover 17 18 LEFT SIDE RIGHT SIDE Sensor Jack Channel 1 USB Communication Cable Jack 1 Sensor Jack Channel 2 Only for TR 71Ui Serial Communication Cable Jack 2 lt POWER gt Button 1 Enable communication by connecting the data logger to the computer with a USB cable Before communicating via USB it is necessary to install the USB device driver After installing your computer will be able to detect and recognize any TR 71Ui 72Ui that has been connected with a USB cable For details about how to install the USB device driver see Installing the USB Driver in the Software T amp D Recorder for Windows TR 5 7xU User s Manual 2 The serial communication cable is optional LCD Display ENDLI SS coM ONETIME 1 Channel Mark The channel number of the measurement being displayed will appear 2 REC M
9. RVAL gt button during recording or while waiting for a programmed recording to start the currently set recording interval will be displayed During recording or while waiting for a programmed recording to start you cannot make recording interval settings Changing the LCD Display Mode lt DISPLAY gt Button The factory default setting is an Alternating Display There are two LCD display modes for current readings Alternating Display and Fixed Display Alternating Display The LCD display shows Ch 1 and Ch 2 alternately in the following order Ch 1 gt gt Ch 2 gt gt Ch 1 gt gt Fixed Display The LCD display shows one channel specified by pressing the lt DISPLAY gt button EX For TR 71Ui 1 During an Alternating Display Both Ch 1 and Ch 2 will be alternately displayed GZJ2ATA EnpLEss By pressing the button when D mnm the Unit has been set to an L LIL c Alternating Display the LCD 417 display mode will change to a Lie Fixed Display Press the button 2 Fixed Display Only Ch 1 will be displayed C3 BATA ENDLESS O 1121 With each pressing of the Lh LIL lt button the item for the Fixed Display will change 4 Press the button Fixed Display Only Ch 2 will be displayed 4 Press the button 3 Alternating Display The LCD display mode will return to an Alternating Display 07 28 Opening the Application and Help After software installation has been completed T
10. Thermo Recorder TR 71U TR 72U4 User s Manual CE Copyright T amp D Corporation All rights reserved 2011 08 16504650005 3rd Edition Table of Contents Safety Precautions and Instructions 4 Before Using this Product 0 0 0 0 12 Basic ProcedureS 2 0 020sseseensnsencesenen 13 About Thermo Recorder TR 71Ui 72Ui 14 Selecting a Method for Downloading Data 16 Package Contents lt 0 2 0 022scssesencssnsenens 17 Appearance Diagram and Part Names 18 LCD Display 2 222202nsnenenenenennncnnenenen 20 Installing the Battery 22 22ss2ssssessens 22 Changing a Battery 23 Turn ON the Power mmmnennmmnnnnnnnnnmnnmnnns 24 Connecting the Sensors 25 Starting Recording lt REC STOP gt Button 26 Setting Recording Interval mms 27 Changing the LCD Display Mode 28 How to Open the Application and Help 29 Specifications 2 222 en nena nn nnnen ene nenenensnsen 30 OPTIONS 22222222n ence ene nn cenennneeneneneneseseseesssssssesens 31 Warranty
11. a USB communication cable If a Unit is left without a battery for some time all data may be lost so please work quickly when changing the battery When a battery life warning mark appears try to replace the battery with a new one as soon as possible When itis time for the battery to be replaced a battery life warning signal will appear If at this time you change the battery recording will continue uninterrupted 1 DR p and all data will be saved for Ja LI C downloading 2 If the battery is not changed but it remains in use SLP will appear in the LCD display Recording will stop in order to protect already recorded data If you change the battery at this point it is still possible to download all saved recorded data 3 If the battery is further left unchanged the display will automatically shut off and all previously recorded data will be lost About Battery Life A TR 71Ui 72Ui Unit can be used continuously for about one year with one AA Alkaline Battery Battery life varies depending upon the type of battery the measuring environment and the frequency of infrared communication Turning ON the Power By holding in the lt POWER gt button at the left side the Unit will turn on lt POWER gt Button Turning OFF the Power By holding in the lt POWER gt button OFF will appear in the LCD display and the Unit will turn off IMPORTANT During recording the power canno
12. acy polic Can Windows connect to Windows Update to search for software O Yes this time only Yes now and every time connect a device Oo not this time Click Next to continue Cancel Button 11 Basic Procedures The following outline shows the basic procedures for getting ready making settings and using the product 1 Getting Ready 1 Install the software T amp D Recorder for Windows See the User s Manual that accompanies the software 2 Get Ready the TR 71Ui 72Ui Data Logger See this Manual 3 Install the USB Device Drivers See the User s Manual that accompa nies the software 2 Making the TR 71Ui 72Ui Unit Settings using supplied software and Starting Recording 1 Make Settings for Device Names Recording Intervals and Recording Modes 2 Start Recording 3 Downloading Data and Displaying Graphs Via Computer Via Data Collector TR 57DCi 1 Connect the TR 71Ui 72Ui sold separately with a USB communication 1 Download data via Infrared cable to a computer Communication 2 Download data via Software 2 Display graphs via Data 3 Display graphs via Software Collector For details about making TR 71Ui 72Ui Unit Settings or about Downloading Data see the explanation in the Software User s Manual and or the Software Help 12 About Thermo Recorder TR 71Ui 72Ui Outline TR 71Ui TR 72Ui Thermo Recorders are data loggers capable of measuring displaying and record
13. amp D Recorder for Windows will be registered in the Windows Start Menu Click as follows to open Windows Start gt gt All Programs gt gt T amp D Recorder for Windows TR 5 7xU gt gt T amp D Recorder for Windows application fan Accessories Prt CA AU EAL i Quick Start AllPrograms D Hoy T amp D Recorder for Windows A Log Off Disconnect 3 start T amp D Recorder for Windows is made up of two applications T amp D Recorder for Windows and Quick Start To get any necessary help go to the Help menu in T amp D Recorder for Windows as opened above click on Search by Topic to show the top window in which all of related topics are listed Contents Tab Contents Tab Index Tab By clicking on one of the topics Search Tab listed you can find detailed E 12D Recorde for Winde ws Help information for that subject Index Tab By selecting a keyword in the keyword list and clicking the Display button at the bottom a detailed explanation will appear E Menu Window Others E Copyrights and others afes Launcher Main Q Outline Q Start Menu Q Date Displa Q Help Menu Search Tab Enter the keyword you wish to search for and click the List Topics button All topics that contain the keyword will be displayed By selecting a topic from the list and clicking the Display button at the bottom a detailed explanation window will app
14. an important warning or caution Inside or near the symbol will appear another symbol giving details EX CAUTION AGAINST ELECTRIC SHOCK Denotes a forbidden action Inside or near the symbol will appear another symbol giving details EX DO NOT DISASSEMBLE Denotes an action that must be taken Inside or near the symbol will appear another symbol giving details EX UNPLUG POWER PLUG FROM OUTLET DO NOT DISASSEMBLE FORBIDDEN DO NOT USE IN WET AREAS STRICTLY FOLLOW FORBIDDEN FORBIDDEN DANGER Do not take apart repair or modify the Unit Doing so may cause fire or electrocution If water or a foreign object enters into the Unit immediately turn OFF the power remove batteries and stop using Continued use may cause fire or electrocution Do not use this Unit in wet or humid places such as a bathroom Doing so may cause fire electrocution and or malfunction Store the Unit batteries and communication cables out of the reach of children Touching them may cause injury and swallowing batteries is extremely dangerous If any smoke or strange smells are emitted from the Unit immediately turn OFF the power remove batteries and stop using Continued use may cause fire or electrocution Do not drop or expose the Unit to a strong impact If that happens to the Unit immediately turn OFF the power remove batteries and stop using Continued use may cause fire or
15. ark The recording status will appear ON Recording in progress BLINKING Waiting for programmed start OFF Recording has been stopped 3 Data Capacity Scale After every 2 000 readings the scale will be marked from left to right Storage capacity is 8 000 readings 4 COM Mark Normally this mark will not be displayed When a Unit is connected to the computer with a USB cable this will appear Also this mark will blink rapidly when a Unit is in communication with the computer via USB or Infrared communication 5 Recording Mode ENDLESS Upon reaching the storage capacity of 8 000 readings the oldest data will be overwritten and recording will continue ONETIME Upon reaching capacity of 8 000 readings recording will automatically stop Battery Life Warning _ If there is ample battery power this will not appear Mark When it is time for the battery to be replaced this mark will appear See p 22 Unit of Measurement Humidity C F Temperature Current Readings and Normally the current readings will appear Messages Area Depending on the Unit s status operational messages will be displayed See the next page 19 Main Display Messages The following are the main display messages that appear on the LCD display FULL Storage Capacity FULL Upon reaching storage capacity of 8 000 readings FULL will appear on the LCD display When this message appears recording has been stopped Only when
16. e Data Collector TR 57DCi make necessary settings for infrared communication function in the TR 71Ui 72Ui and set to Permit For more details see the User s Manual that comes with the software 2 With the Unit and the TR 57DCi face to face and with about 10 to 20 cm of space between them download the recorded data from the TR 71Ui 72Ui to the TR 57DCi within 15 degrees from side to side and top to bottom For detailed information about the operation and functions of the Data Collector TR 57DCi see the TR 57DCi User s Manual TR 71Ui 72Ui ie PC TR 57DCi IMPORTANT Infrared communication is a function limited to the downloading of recorded data Other functions such as making Unit settings cannot be carried out For downloading one TR 71Ui 72Ui Unit at full storage capacity it takes about 60 seconds 15 Package Contents The following items are included in the package TR 71Ui Es TR 71Ui Unit x 1 Temperature USB Communica Sensor tion Cable TR 0106 x 2 US 15C x 1 AA Alkaline User s Manual Software User s battery x 1 Warranty x 1 Manual x 1 TR 72Ui TR 72Ui Unit x 1 Temperature Software CD ROM USB Communica Humidity Sensor x 1 tion Cable TR 3100 x 1 US 15C x 1 AA Alkaline User s Manual Software User s battery x 1 Warranty x 1
17. ear Specifications Device Type TR 71Ui TR 72Ui Number of Channels 2 Ch Select from Ch 1 internal Ch 2 external 2 Ch ch for Temperature 1ch for Humidity Measurement Items Temperature Temperature Humidity Internal Temperature 10 to 60 C 10 to 60 C _ Sensor Attached Sensor 40 to 110 C 0 to 50 C 10 to 95 RH Se PIE os asec 40 to 110 C ensor Measuring Accuracy Avg 0 3 C 20 to 80 C 5 RH with Attached Sensor Avg 0 5 C 40 to 20 80 to 110 C at 25 C 50 RH Measurement Display 0 1 C 1 RH Resolution Sensor Thermistor a we Humidity Sensor Recording Intervals Storage Capacity Select from 15 choices 1 2 5 10 15 20 and 30 sec 1 2 5 10 15 20 30 and 60 min 8 000 readings One reading is a set of data which includes measurements for that unit type s number of channels Recording Modes ENDLESS ONETIME LCD Displayed Items Measurements Ch1 only Ch2 only alternating display Measurement and Recording Status Battery Life Warning Amount of Recorded Data Unit of Measurement Power AA Alkaline Battery LR6 x 1 Battery Life 2 About 1 year About 7 months if recorded data is downloaded via infrared communication once a day Communication Interfaces USB Serial RS 232C Infrared Communication USB Communication Time About 8 sec when downloading a Unit at full storage capacity Inf
18. en messages in this document may vary slightly from the actual messages Please notify the shop where you purchased this product or T amp D Corporation of any mistakes errors or unclear explanations in this manual T amp D Corporation accepts no responsibility for any damage or loss of income caused by the use of our product This product has been designed for private and or industrial use only It is not for use in situations where strict safety precautions are necessary such as in connection with medical equipment whether directly or indirectly We are not responsible for any malfunction or trouble caused by the use of our product or by any problem caused by the use of measurement results of our product Please be fully aware of this before using our product This manual cannot be reissued so please keep it in a safe place Please read the warranty and provisions for free repair carefully Radio EMC and Safety Regulations This device complies with Part 15 of the Federal Communications Commission FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protec
19. er or near areas where high pressure water is flowing Cautions about using the Temperature Humidity Sensor When using the Temperature Humidity Sensor TR 3100 please take note of the following Use the sensor in an environment where the ambient temperature is from 0 to 50 C and the humidity is 95 RH no condensation or less If extremely severe temperature changes occur the humidity measurements may appear abnormal Once the sensor s temperature becomes stable the measurements will return to normal This sensor is not waterproof Only use in an environment where there is no condensation or possibility of becoming wet Do not use in water or near areas where high pressure water is flowing Do not use in any environment that is exposed to corrosive gas and organic solvents Also do not use in areas near fire or exposed to excessive heat When using the temperature humidity sensor in environments where the temperature is 0 to 15 C and humidity under 30 RH there may occur changes in measurement readings This is not a malfunction During use the surface of the temperature humidity sensor will accumulate impurities dirt causing a decrease in the sensor s accuracy and sensitivity The service life of humidity sensors can vary greatly depending on operating environment Periodic calibration may be required Moreover it may be necessary to replace the sensor if the sensor is being used in an environment where smoke a
20. his product to a computer with a USB commu nication cable it is necessary to first install the software and the USB device driver If you connect a TR 71Ui 72Ui to the computer before installing the USB device driver may not be installed properly If you have connected a TR 71Ui 72Ui to your computer before installing the USB device driver make sure to click the Cancel button in the Wizard window when it pops up on the computer display Then disconnect the USB communication cable from the TR 71Ui 72Ui For more details about the proper installation procedure see the User s Manual for the provided software T amp D Recorder for Windows For Windows 7 Windows Vista 7 Found New Hardware Windows needs to install driver software for your Unknown Device Locate and install driver software recommended Windows will guide you through the process of installing driver software for your device Ask me again later Windows will ask again the next time you plug in your device or log on Don t show this message again for this device Your device will not function until you install driver software cance Cancel Button For Windows XP Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission Read our priv
21. ields This may cause damage including malfunction Areas exposed to water leakage This may cause electrocution or other damage including malfunction Areas exposed to excessive vibration This may cause injury malfunction damage or loss of proper electrical contact Areas near fire or exposed to excessive heat This may cause damage including malfunction and deformation Areas exposed to excessive dust dirt and smoke This may cause damage including malfunction Notices about Wireless Communication Devices This Unit is an infrared equipped device Do not place the Unit in areas exposed to direct sunlight or incandescent light or near other infrared devices Infrared communication may not work properly when in direct incandescent light or when other infrared devices are nearby Proper communication may not be possible if the Infrared Port accumulates impurities dirt If the Infrared Port gets dirty wipe it with a soft cloth Don t touch the Infrared Port with your finger during infrared communication A Cautions about using the Temperature Sensor When using the Temperature Sensor TR 0106 please take note of the following Use the sensor in an environment where the ambient temperature is from 40 to 110 C It is possible to use just one extension cable per temperature sensor This sensor is not waterproof Only use in an environment where there is no condensation or possibility of becoming wet Do not use in wat
22. ing temperature and humidity data TR 71Ui has two temperature channels and TR 72Ui has one tempera ture and one humidity channel Temperature Measurement Range 60 to 155 C TR 71Ui The TR 71Ui with the sensor included in this package can measure and record in a range of 40 to 110 C but by purchasing one of our optional sensors it is possible to measure and record in the wider range of 60 to 155 C Please take a look at our full range of optional sensors to find one to match your application Humidity Measurement Range 10 to 95 RH TR 72Ui The TR 72Ui with the sensor included in this package can simultaneously measure and record temperature in a range of 0 to 50 C and humidity in a range of 10 to 95 RH Storage Capacity 8 000 Readings One reading is a set of data which includes measurements for that unit type s number of chan nels At the longest recording interval of 60 minutes recording can continue consecutively for one year One Year of Operation with just One AA Alkaline Battery Our low energy consumption design gives you one year of continuous operation with only one AA alkaline battery This enables measuring and recording over long periods of time IMPORTANT Battery life varies depending upon the type of battery the battery performance the measuring environment and the frequency of communication Specifications and explanations used in this manual are based on operations carried out with a new battery and are in no
23. led paper
24. nd dust are in over abundance or where the temperature and humidity exceed the operational range When the sensor is not being used please place it in the attached vinyl bag with the drying agent included and store it in a cool dark place with a temperature of between 5 to 25 C and a humidity of below 30 RH Attached to the temperature humidity sensor are two stickers a wetness detection sticker and a temperature detection sticker If either of the stickers shows abnormality you should change the old sensor to a new one immediately Wetness Detection Sticker D 4 Temperature Detection Sticker RS D CRE RS L Wetness Detection Sticker Informs you that the sensor has been wet Under normal conditions black dots Under abnormal conditions it will will appear on a white background turn to red Normal Abnormal Temperature Detection Sticker Informs you that the sensor measured a temperature measurement over 60 C Under normal conditions the Under abnormal conditions the number 60 will lightly appear on a number 60 will clearly appear on a Normal white pink background Abnormal red background 10 Before Using this Product Please be careful about the procedures for Installation For USB communication between your computer and a TR 71Ui 72Ui In order to use a USB connection to communicate between this product and a PC it is necessary to install the application and the USB driver Before connecting t
25. o types of recording modes to choose from One Time Upon reaching the storage capacity of 8 000 readings FULL will appear on the LCD display and recording will automatically stop Endless Upon reaching the storage capacity of 8 000 readings the oldest data will be overwritten and recording will continue Adjustment Function By entering the adjustment values beforehand it is possible to view and record the adjusted measurement values There are two methods of adjustment adjusting by one point or adjusting by two points Adjustment for differences will be based upon the following simple equation Y aX b X equals the measured value and Y equals the value after adjustment If you remove a sensor that was connected when adjustment was carried out and then connect a different sensor make sure to make new adjustment settings to reflect the actual situation 14 Selecting a Method for Downloading Data Via USB Cable Connect a TR 71Ui 72Ui Unit directly to your computer with a USB cable to download recorded data TR 71Ui 72Ui PC Via Data Collector TR 57DCi sold separately Use the infrared communication function in the TR 57DCi to collect recorded data from a TR 71Ui 72Ui Unit The collected data can then be downloaded to your computer by connecting the TR 57DCi to a PC with a USB cable Getting Ready and Downloading Data 1 Using the software T amp D Recorder for Windows which comes with th
26. rared Communication IrPHY 1 2 low power Dimensions Weight H55 x W78 x D18mm About 62g Including one AA battery Operating Environment Temperature 10 to 60 C Humidity 90 RH or less no condensation Attached Sensor TR 0106 x 2 TR 3100 x 1 Accessories AA Alkaline Battery LR6 x 1 USB Communication Cable x 1 US 15C length 1 5m Software CD ROM Users Manual Warranty x 1 1 Measurement range varies depending upon the type of temperature sensor For details see Options on the next page 2 Battery life varies depending upon the measuring environment frequency of communication recording interval and quality of the battery being used 29 Options Temperature Sensor for TR 71Ui 30 Unit mm Fluoropolymer Coated Sensor TR 1106 Cable Length 0 6m a m j Time to Thermal Constant pp atl In air about 30 sec 4 In water about 4 sec Stainless Protection Sensor TR 1220 Cable Length 2m 15 2000 7 Time to Thermal Constant H In air about 36 sec aN In water about 7 sec Stainless Protection Sensor TR 1320 Cable Length 2m a E ER Time to Thermal Constant m In air about 12 sec O In water about 2 sec Materials D Thermistor Stainless pipe SUS316 Fluoropolymer Compaction Tube Fluoropolymer Coated Electrical Wire Temperature Measurement Range 60 to 155 C Sensor Temperature Durability 70 to 180 C
27. re Humidity Sensor for TR 72Ui 32 Unit mm TR 3100 Temperature Humidity Sensor TR 3110 Temperature Humidity Sensor Cable Length 1m 52 1000 CE ju L ue E Materials Temperature Humidity Sensor 2 Polypropylene Resin Vinyl Chloride Coated Electrical Wire Humidity Measurement Range 10 to 95 RH Temperature Measurement Range 0 to 50 C Humidity Measuring Accuracy 5 RH at 25 C 10 to 50 RH Sensor Temperature Durability 10 to 55 C Conditions for Use Without dew condensation water leakage or effect from corrosive gas or organic solvents The service life of humidity sensors can vary greatly depending on operating environment Periodic calibration may be required IMPORTANT The extension cable cannot be used with the TR 3110 Sensor Extension Cable Unit mm TR 1C30 Sensor Extension Cable Temperature Sensor Only Cable Length 3m 3000 n a Materials D Vinyl Coated Electrical Wire IMPORTANT Only one extension cable per sensor When using the extension cable there will be a 0 3 C at normal temperature and at 50 C a gap of 0 5 C may occur If a sensor extension cable TR 1C30 is being used with the data logger connected by USB to your computer electromagnetic waves may cause large errors in measurements Do not use this extension cable with the temperature humidity sensor TR 5C10 Sensor Extension Cable Temperature Humidity Sensor TR 3100 Only Cable
28. s in or a loss of data If the Unit is not to be used for a long period of time for safety reasons please remove the battery If left in the Unit the battery may leak and lead to malfunctioning If the Unit is not to be used for a long period of time store it in a place where it is not exposed to high temperature and high humidity with other items included Use the Unit in an environment where the ambient temperature is from 0 to 50 C and the humidity is 90 RH no condensation or less gt CAUTION STRICTLY FOLLOW FORBIDDEN FORBIDDEN Please take extra caution when plugging in and pulling out the USB plug while another USB device such as CDD or HDD is in operation It may cause problems to your CD RW or other device We shall not guarantee the operation of the Unit if you have connected it to your computer using a USB hub or a USB extension cable Please do not insert your fingers or any foreign objects into any of the Units jacks Do not use any other batteries than those that are specified in this Manual Doing so may cause fire or malfunction Do not use or store the Unit in any of the following places Doing so may cause electrocution fire and or other adverse effects to the device and or your computer Areas exposed to direct sunlight This will cause the inside of the Unit to become overheated and may cause fire deformation and or other damage including malfunction Areas exposed to strong magnetic f
29. t be turned off Please stop recording first and then press the lt POWER gt button to turn off the power Even if the power has been turned off the recorded data will be saved However if the battery power is totally lost all data will be lost so please download data as soon as possible to avoid losing any necessary data 23 Connecting the Sensors Connect the sensors to the sensor jacks on the TR 71Ui 72Ui Unit TR 71Ui If a temperature sensor is connected to only the Ch 2 jack the internal sensor will be used to measure for Ch 1 To ensure a proper connection make sure that the sensor connector is completely inserted IMPORTANT If a sensor extension cable is being used with the data logger connected by USB to your computer electromagnetic waves may cause large errors in measurements TR 72Ui To ensure a proper connection make sure that the sensor connector is completely inserted 24 Starting Recording lt REC STOP gt Button By pressing the lt REC STOP gt button on the TR 71Ui 72Ui Unit you can start a recording session immediately The Device Name Channel Name Recording Mode and all other recording condition settings must be made first via the computer using the software Starting Recording Pressing the lt REC STOP gt button on the TR 71Ui 72Ui Unit until the REC mark appears will start a new recording session REC Mark lights up TA DATA com ENPLESS T1 11
30. tion against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Safety Precautions and Instructions To ensure safety obey all of the following warnings The following items should be strictly obeyed for the safe usage of this Unit and for protecting yourself and other people from bodily harm and or damage to property Before using this Unit please read the following carefully and fully under stand the contents Explanation of Symbols Explanation of Warning Symbols These entries are actions that absolutely under no circumstance should be taken These entries are A DANGER actions that absolutely under no circumstance should be taken The taking of such an action may cause serious personal physical damage or death A CAUTION These entries are actions that if taken may lead to physical injury or damage to persons or things Explanation of Picture Symbols Denotes
Download Pdf Manuals
Related Search