Home

1-888-628-1730 • XRT Pro Installation Manual 1

image

Contents

1. rr _ DIESEL DOWNLOADER B FORD GM DODGE Rev 01 09 13 Revision Date These instructions are current as of 01 09 13 Revisions may apply and are available at www hsperformance com THIS IS A HIGH PERFORMANCE PRODUCT TO BE USED AT YOUR OWN RISK Do not install this product until you have read and fully understand the following disclaimer of liability The fol lowing disclaimer of liability sets forth the terms and conditions for the installation and or use of this product By installing this high performance product the buyer acknowledges that they have read and fully understand this disclaimer and accepts its terms and conditions DISCLAIMER OF LIABILITY H amp S Performance LLC and their successors distributors jobbers dealers and retailers SELLER shall in no way be respon sible for any direct indirect or consequential damage resulting from improper installation and or use of this product The BUYER USER assumes all responsibility for any damage resulting from the use or misuse of this product The buyer hereby waives all liability claims for the use of this product The BUYER acknowledges that he she is not relying on the SELLER s skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description herein and the BUYER hereby waives all remedies or liabilities expressed or implied arising by law or otherwise
2. scsscccssssessscesssccsssecsssscsssscesseeees 35 2007 5 2010 6 6L LMM Duramax cccssccccssssccssssssccsssssecccsssssscsssscseees 37 2011 2013 6 6L LML DuramaX vcrisisciciririnzinirivacnaniizinianieninicnicicaninicnic 38 XRT Pro Installation Manual www hsperformance com BILL OF MATERIALS The list below includes by name the major parts included in your XRT Pro package 1 XRT Pro 2 OBDII Adapter Harness Micro SD Card 3 USB Adapter in XRT Pro 1 i ae a Ai _ DIESEL DOWHLOADER 1 888 628 1730 XRT Pro Installation Manual PARTS DESCRIPTION This section describes each of the parts in the Bill of Materials the descriptions provide a physical set of attributes and a purpose for each part The parts descriptions also list everything that is included in each assembly The XRT Pro Head Unit The main component is the XRT Pro Head Unit The Head Unit is the interface in which you control vehicle performance pa rameters Notice that the head unit has seven total buttons five on the left side and two on the right a large color screen and an electronic plug for docking on the back Note XRT Pro includes a micro SD card inserted in the side of the Head Unit OBD Il Adapter Harness The OBD Il Adapter is a communication hub for the XRT Pro The OBD Il Adaptor plugs directly into the vehicle OBD Il port and connects to the XRT Pro USB to Micro SD Adapter The
3. Tire Size Calibration Not currently available for the 2003 2007 6 0L Powerstroke This may change so be sure to visit www hsperformance com for product updates This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In addition using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while en tering a smaller tire size will cause the factory speedometer to read lower Tire size can be adjusted from 25 to 40 This option can only be adjusted during the Install Download process XRT Pro Installation Manual www hsperformance com 2008 2010 6 4L FORD POWERSTROKE USA ULSD CALIBRATION Power Levels Power Levels can be adjusted on the fly at the touch of a button POWER LEVELS after Installing the Download to the vehicle To adjust the Power Stock OHP Level select Change Power Level from the Main Menu e n if di OW NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning S n 80 HP devices are shipped with Any custom downloads may result in different rat Performance 120 HP ings and can be found at www h
4. LA n T PA k ee i o JB a loss of power limp mode When running High Sulfur tuning it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses These sensors can also be re moved completely with the factory exhaust if desired On the 2007 5 2009 6 7L Cummins there are usually 3 EGT Sensors 2 02 Sensors and 1 Pressure Sensor EGR Emissions Equipment If you are installing H amp S High Sulfur tuning you must unplug the EGR system on your 2007 5 2009 6 7L Cummins if not installing an EGR delete Failing to do so may result in erratic engine operation and loss of power Please follow these instructions carefully to unplug and disable the EGR system 1 Locate the EGR Throttle Control Valve Assembly Fig 1 Assembly is located between the inter cooler and intake manifold on the drivers side of the engine compartment 2 Unplug the EGR Throttle Control Valve wiring harness The harness is LIGHT GRAY in color and is located on the back side of the Throttle Control Valve Assembly It is not directly visible when looking at the assembly from above On some vehicles it may be easier to see and unplug the harness from underneath the vehicle Note There is a red locking tab that must be moved Sideways on the harness in order for it to be unplugged 3 Locate the EGR solenoid on top of the intake manifold Fig 2 It is directly visible when
5. on Ti J When running High Sulfur tuning it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses These sensors can also be removed completely with the factory exhaust if desired On the 6 6L LMM Duramax there are usually 3 EGT Sensors and 1 Pressure Sensor EGR Emissions Equipment When running H amp S High Sulfur tuning it is not required to unplug or block off the EGR system on your 6 6L LMM Duramax to disable it The EGR system is already disabled in the tuning and will not function under any conditions If desired the entire EGR system can be unplugged blocked off or completely removed when running H amp S High Sulfur tuning 1 888 628 1730 Mini Maxx Installation Manual oc LA I 7 x JB a 57 CALIBRATIONS 2011 2013 6 6L LML DURAMAX HIGH SULFUR CALIBRATION Power Levels Power levels are not currently shift on the fly for the 2011 2013 6 6L LML Duramax To adjust the Power Level select Change Power Level from the Main Menu and follow the on screen instructions this may change so be sure to visit www hsperformance com for product updates NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning devices are shipped with Any custom downloads may result in different rat ings and can be found at www hsperform
6. with the added horsepower The transmission will eventually learn over time on its own but the relearn procedure gives a good baseline for the adaptive learning and helps to speed up the learning process To perform the relearn procedure please follow these instructions When re training the transmission ALWAYS follow posted speed limits Do NOT at tempt runs in adverse weather conditions such as snow ice rain wind or any other conditions that may affect your vehicles traction or impair your visibility 1 After you have installed the H amp S tuning turn the key to the ON position From the Main Menu scroll down until you see the Reset Transmission option Select Reset Transmis sion and follow the on screen instructions to reset the transmission adaptive memory 2 After the transmission reset is complete it is recommended to perform each of the follow ing 0 80 MPH runs while in the Performance power level 0 80 MPH 25 throttle position then slow down and come to a complete stop 0 80 MPH 50 throttle position then slow down and come to a complete stop 0 80 MPH 100 throttle position then slow down and come to a complete stop The Transmission Relearn procedure is complete NOTE On any vehicle using 3 or larger lift blocks under the rear leaf pack it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower 1 888 628 1730 e XRT Pro Installation Manual SECTION 7 HIGH SULFUR
7. 3 Default 4 Firm 5 Most firm NOTE An additional unlock fee may apply click here for details Overdrive Transmission Software is not available on Cab amp Chassis models 1 888 628 1730 e XRT Pro Installation Manual 2010 2012 6 7L DODGE CUMMINS USA ULSD CALIBRATION _ Power Levels To adjust the Power Level select Change Power Level from 7 the Main Menu and follow the on screen instructions 2010 2012 PICKUP NOTE The Power Level ratings listed may not be exact for your particular POWER LEVELS vehicle The listed ratings apply to the out of the box tuning that H amp S tuning Tow 40 HP devices are shipped with Any custom downloads may result in differentrat onnenn ings and can be found at www hsperformance com update instructions Street 80 HP Speed Limiter m This option allows for the adjustment of the factory speed limiter Most 2010 2012 6 7L Cummins trucks have a 106 MPH speed POWER LEVELS limiter from the factory The limiter can be adjusted from 20 MPH to 200 MPH This option can only be adjusted during the Install TOW 20 HP Download process a 40 HP Torque Management Manual Transmission Only This option allows for the disabling of the vehicles torque management for those equipped with manual transmissions This option increases pedal sensitivity and throttle response when REMOVED Tire Size Calibration This option allows for the re calibration of the factory speedom
8. MPH runs while in the Performance power level e 0 80 MPH 25 throttle position then slow down and come to a complete stop e 0 80 MPH 50 throttle position then slow down and come to a complete stop 0 80 MPH 100 throttle position then slow down and come to a complete stop The Transmission Relearn procedure is complete NOTE On any vehicle using 3 or larger lift blocks under the rear leaf pack it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower 2011 2013 6 6L LML DURAMAX USA ULSD CALIBRATION Power Levels Power levels are not currently shift on the fly for the D 2011 2013 6 6L LML Duramax To adjust the Power Level POWER LEVELS select Change Power Level from the Main Menu and follow Te 40 HP the on screen instructions this may change so be sure to visit Street 80 HP www hsperformance com for product updates NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning devices are shipped with Any custom downloads may result in different ratings and can be found at www hsperformance com update instructions Speed Limiter This option allows for the removal of the factory speed limiter Most 6 6L LML Duramax trucks have a 98 MPH speed limiter from the factory The limiter may be removed complete ly but WILL result in a loss of cruise control and exhaust brake
9. accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In additon using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower The tire size can be adjusted from 24 to 42 This option only takes a few seconds to change and can be adjusted at any time from the Tire Size Calibration menu Overdrive Transmission Software Did you know that your H amp S tuning device also has the capability of tuning your transmission If your 5 9L Cummins is equipped with the 48RFE automatic transmission you may want to check out our Overdrive Transmission Software Custom tailored to mate with H amp S engine tuning the 5 9L Overdrive software includes modified torque converter lock unlock strategies that will command the IC to lock in 3rd gear under wide open throttle and hold it locked through 4th gear Light throttle torque converter strategies have also been changed to lock up sooner keeping more power directed to the road instead of wasted in heat and friction Shift points are modified to take advantage of the available horsepower and torque output On a 2006 Cummins with a stock A8RFE we have seen 0 2 to 0 3 second quicker 1 4 mile times JUST from the addition of the H amp S Ove
10. be found at www hsperformance com update instructions Performance 175 HP Injection Timing This option allows for the adjustment of the maximum al lowed injection timing There are 5 different settings for the Injection Timing 1 24 degrees 2 26 degrees 3 28 degrees Default 4 30 degrees 5 32 degrees dN37NS HOIH SNOMWHSITO AGI NOTE The injection timing adjustment will affect ALL power levels This option can only be adjusted during the Install Download process Adjustable Throttle Response This option allows for the adjustment of the throttle response There are 3 different settings for the Throttle Response 1 Stock Response 2 Default Response 3 High Response Emissions Selection Most 2007 2009 6 7L Cummins are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the exhaust system stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even 1 888 628 1730 Mini Maxx Installation Manual oc
11. to read higher while entering a smaller tire size will cause the factory speedometer to read lower The tire size can be adjusted from 25 5 to 45 This option only takes a few seconds to change and can be adjusted at any time from the Tire Pressure Calibration menu Special Functions Features Your H amp S tuning device has the capability of Enabling Disabling factory vehicle features These features can be found in the Special Functions Menu Below is a short description of each feature NOTE fany special feature is already listed as Enabled but is not functioning correctly you may need to disable the feature cycle the key and re enable the feature to make it function properly If it still does not work your vehicle may not be equipped with the hardware required for the special feature The previous selection will NOT be saved If the Special Functions Features Menu is exited and returned into it will not display your previous selection This is normal and the Enable Disable function is still working properly TPMS Enable Disable the Tire Pressure Monitoring System Optical Chirp on Lock Enable Disable the parking lights flashing when locking the vehicle Horn Chirp on Lock Enable Disable the horn chirp when locking the vehicle Set Head Lamp Delay Enable Disable the head lamp delay Accessory Delay Enable Disable the shut off delay of your radio and accessory system after the key has 1 888 628 1730 XRT Pro In
12. to the description quality merchantability fitness for any prod uct s purpose or any other matter of SELLER s product sold herewith The SELLER shall be in no way responsible for the prod uct s use and service and the BUYER hereby waives all rights other than those expressly written herein This Warranty shall not be varied except by a written agreement signed and dated by SELLER and BUYER The Warranty is Limited to one 1 year from the date of sale and limited solely to the parts contained within the product s original packaging All products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated proof of purchase receipt All Warranty claims are subject to approval by H amp S Performance LLC Under no circumstances shall the SELLER be liable for any labor charges incurred or travel time incurred in diagnosis for defects removal or re installation of this product or any other contingent expenses Any product deemed defective and consequently repaired or replaced by SELLER shall retain the remainder of the warranty period from date of purchase as the warranty period shall not be extended due to repair or replacement Under no circumstances will the SELLER be liable for any damage or expenses incurred by reason of the use or sale of any such product This warranty is null and void after 90 days for an unregistered product www hsperformance com product registration This warr
13. 8 2010 6 4L Powerstroke has what is called Adaptive Memory and is constantly learning and adapting to different horsepower levels temperatures driving habits etc After completing the Install Download process on the 6 4L Powerstroke the Transmission Adaptive Memory is automatically reset We highly recom mend performing a Transmission Relearn procedure after installing H amp S tuning to help the transmission perform correctly with the added horsepower The 5R110 automatic trans mission will eventually learn over time on its own but the relearn procedure gives a good baseline for the adaptive learning and helps to speed up the learning process To perform the relearn procedure please follow these instructions When re training the transmission ALWAYS follow posted speed limits Do NOT at tempt runs in adverse weather conditions such as snow ice rain wind or any other conditions that may affect your vehicles traction or impair your visibility 1 After H amp S tuning is installed perform each of the following 0 80 MPH runs while in the Performance power level During this relearn process you may experience hesitation during shifts hard shifts or defuel patterns all of which are normal 0 80 MPH 25 throttle position then slow down and come to a complete stop 0 80 MPH 50 throttle position then slow down and come to a complete stop 0 80 MPH 100 throttle position then slow down and come to a complete stop The Transmissio
14. CALIBRATION VEHICLE SPECIFIC FEATURES Ja HIGH SULFUR ly CALIBRATIONS The remaining pages in this manual are intended for those running a High Sulfur calibration from H amp S Performance More information can be found at www hsperformance com highsulfur oc LA I n 2 AB _l59 CALIBRATIONS All vehicle specific information prior to this section still applies to those using High Sulfur calibrations When the High Sulfur calibration is used the features listed below are ADDITIONAL to all other features contained in this manual Disclaimer Illegal usage of the High Sulfur calibration is NOT allowed by H amp S Performance Any altera tion of an H amp S device in an attempt to obtain High Sulfur capabilities will be cause for H amp S Warranty termination More information about the design and correct use of the H amp S High Sulfur calibration can be found at www hsperformance com highsulfur Mini Maxx Installation Manual e www hsperformance com 2007 5 2009 6 7L DODGE CUMMINS HIGH SULFUR CALIBRATION Power Levels To adjust the Power Level select Change Power Level from the POWER LEVELS Main Menu and follow the on screen instructions NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning devices are shipped with Any custom downloads may result in different rat Street 120 HP ings and can
15. T Pro from the vehicle Tuners can only be installed on ONE vehicle at a time 1 888 628 1730 XRT Pro Installation Manual SECTION 4 EXPLORING THE MENU SYSTEM The diagram below shows all of the Main Menu items and explains the Main Menu navigation Navigation through the main menu Use the large Up 4 Down w Buttons to page up and page down through all the Main Menu options XRT PRO Change Vehicle gt Install Download gt Special Functions gt Tire Size Calibration C Diagnostics gt Show Settings Update Firmware These buttons are used to enter into the sub menus from the main menu and may also be used to select additional items when in the sub menus XRT Pro Installation Manual www hsperformance com SECTION 5 OTHER XRT PRO FEATURES DIAGNOSTICS This functions allows you to check vehicle diagnostics codes Some models you will have an option to check Engine or Transmission diagnostics Please select the desired module Upon entering this menu the XRT Pro will automatically begin to check the vehicle for DTCs and it will then display those DICs on the XRT Pro screen Once it displays the DICs value and description on the screen it will allow you to erase the DICs from the vehicle L m al Ta 3 Diagnostic Trouble Codes DI Establishing communication with the vehicle E S i _ I x e _ 0ua_ L u ee PY DIESEL DOWNLOADER E I
16. USB to Micro SD Adapter is what you will use to update your XRT Pro You will take the Micro SD card out of the XRT Pro and insert it into the adapter then insert the adapter into your personal computer XRT Pro Installation Manual e www hsperformance com XRT PRO OPERATING INSTRUCTIONS a These operating instructions are split into sections e SECTION 1 Button Navigation e SECTION 2 Install Download e SECTION 3 Changing Power Levels e SECTION 4 Exploring the Menu System e SECTION 5 Other XRT Pro Features e SECTION 6 Vehicle Specific Features SECTION 1 BUTTON NAVIGATION a i DIESEL DOWNLOADER Press any of the five buttons on the left to In general these buttons work as up and down select items on the screen that are adjacent to buttons they may also be used to select items the button position on the screen adjacent to these buttons 1 888 628 1730 XRT Pro Installation Manual SECTION 2 INSTALL DOWNLOAD The Install Download option is used to install tuning onto a vehicle or return a vehicle to stock 1 Plug in XRT Pro 2 Select Vehicle to Be Tuned Tuners can only be installed on ONE vehicle at a time 3 Select Install Download If the vehicle is stock and you enter the install download menu simply follow the screen prompts to install a download on the vehicle This is the point in which you may come across the tire size calibration menu and the vehicle speed limiter menu XRT PRO gt Change Veh
17. ad to the vehicle To adjust a I the Power Level select Change Power Level from the Main Menu TOW 40 HP cc 80 HP NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning Performance 120 HP devices are shipped with Any custom downloads may result in different rat ings and can be found at www hsperformance com update instructions Speed Limiter This option allows for the adjustment of the factory speed limiter Most 6 6L LMM Duramax trucks have a 98 MPH speed limiter from the factory The limiter can be adjusted from 50 MPH to 95 MPH or removed completely This option can only be adjusted during the Install Download process Tire Size Calibration This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In additon using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower The tire size can be adjust ed from 25 to 60 This option can only be adjusted during the Install Download process NOTE On some vehic
18. already disabled in the tuning and will not function under any conditions If desired the entire EGR system can be unplugged blocked off or completely removed when running H amp S High Sulfur tuning Tune Selection This option allows you to pick from 3 tuning options To change this selection you must repeat the install download process 1 888 628 1730 mm Mini Maxx Installation Manual 1 EasyPowerlevelsare stock 60hp 120hp and 175hp 2 Mild Power levels are stock 80hp 160hp and 250hp 3 Hot Damn 300 Power levels are 50hp 125hp 225hp 300hp Low Boost Fueling Adjustment This adjustment allows you to limit the amount of fuel delivered based upon turbo boost levels 0 will have the least smoke output 5 will have the most By skipping this feature the tuning will default to level 2 Shift Schedule This option allows you to change the shift logic of your automatic transmission There are 2 options To change these options you must repeat the install download process 1 Schedule 1 This option will lock the torque converter in 4th gear under normal driving and keep it locked through 5th gear 2 Schedule 2 This option will not lock the torque converter until 5th gear under normal driving NOTE The Easy Power Tuning also has Easy shift schedule It is NOT adjustable PA k ee i o AB Shift Point This option will allow you to modify shift points for the 3 4 and 4 5 shifts There are 3 options t
19. ance com update instructions Emissions Selection POWER LEVELS Stock 0 HP OW S 50 HP Street 100 HP Performance 150 HP Most 2011 2013 6 6L LML Duramax s are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the exhaust system stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even a loss of power limp mode When running High Sulfur tuning it is required that all sensors located in the factory exhaust system be unplugged from the electrical harnesses EXCEPT FOR THE PRESSURE SENSOR WHICH MUST REMAIN PLUGGED IN All sensors other than the Pressure Sensor can be removed completely with the factory exhaust if desired On the 6 6L LML Duramax there are usually 3 EGT Sensors 1 NOx Sensor 1 UREA Injector and 1 Pressure Sensor ES or de The DPF Pressure Sensor is located under the bed in ts front of the axle on the inside of the passenger side frame rail You may pull the two rubber lines o
20. and part throttle shift firmness modified torque management tables and much more All changes are designed to keep more power directed to the road instead of wasted in heat and friction On our test trucks we have seen 0 2 to 0 3 second quicker 1 4 mile times JUST from the addition of the H amp S Overdrive tuning An additional unlock fee may apply see www hsperformance com for details 1 888 628 1730 e XRT Pro Installation Manual 2003 2007 6 0L FORD POWERSTROKE USA ULSD CALIBRATION Power Levels A Power Levels can be adjusted on the fly at the touch of a POWER LEVELS button after Installing the Download to the vehicle To adjust the Power Level select Change Power Level from the Main ME snom 0HP Menu OW Seo 40 HP NOTE The Power Level ratings listed may not be exact for your particular Street 80 HP vehicle The listed ratings apply to the out of the box tuning that H amp S tuning devices are shipped with Any custom downloads may result in different rat Performance 120 HP ings and can be found at www hsperformance com update instructions la m Speed Limiter This option allows for the removal of the factory speed limiter Most 6 0L Powerstroke trucks have a 95 MPH speed limiter from the factory The limiter can be removed completely or left stock this may change so be sure to visit www hsperformance com for product updates This option can only be changed during the Install Download process
21. anty is null and void for any new products purchased through unauthorized dealers www hsperformance com unauthorized dealers This warranty is null and void for any products sold as USED or REFURBISHED This warranty is null and void for any products purchased below the H amp S UNILATERAL PRICING POLICY www hsperformance com pricing policies This warranty is null and void for any products that have been altered by a 3rd party If the buyer does not agree to the terms of this limited warranty or the disclaimer of liability the buyer may return this product to the SELLER in a new and unused condition along with dated proof of purchase within 30 days of purchase for a full refund Register your product To register your product online visit www hsperformance com register or scan the QR code Benefits to registering your product include e Guarantee full warranty coverage e Get entered into drawings for free H amp S products and prizes e Get notified of software updates and upcoming features 1 888 628 1730 XRT Pro Installation Manual TABLE OF CONTENTS BILL OF MATERIAL an 5 PARTSDESCRIPIION ani 6 ART FRO OPERATI iaia 7 Section 1 Button Navigation seeesssecesssccesssccesssccesssccessoocessscccessoccessoccessocees 7 Section 2 Install Download seesseesscesseesocesocssoeesecesoessoesseesccessoesseesocesocesoeesoe 8 Section 3 Changing Power Levels cssccssscsssscesssccsssscsssscsssscs
22. cking tab see pictures for locations oc LAL all 7 27 CALIBRATIONS Mini Maxx Installation Manual e www hsperformance com To register your product online visit www hsperformance com register or scan the QR code Guarantee full warranty coverage Dali area La Get entered into drawings for free H amp S products and prizes a I DE F r Get notified of software updates and upcoming features Monthly Product Updates Monthly Tech Tips New Web Site Features And More Visit www hsperformance com to sign up LIKE Us on facebook For chances to win free products from H amp S Performance We do monthly contests for items like LEADING THE INDUSTRY IN LATE MODEL facebook com hsperformance SRI w H amp S Performance LLC 4160 South River Road St George UT 84790 435 628 1730 WWW HSPERFORMANCE COM
23. e 250 HP ings and can be found at www hsperformance com update instructions Emissions Selection Most 2008 2010 6 4L Powerstrokes are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel fe Sy ep pn an dr a mal A a Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the exhaust system stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even a loss of power limp mode When running High Sulfur tuning it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses These sensors can also be removed completely with the factory exhaust if desired On the 6 4L Powerstroke there are usually 3 EGT Sensors and 1 Pressure Sensor NOTE The vehicle will not run with sensors removed unless High Sulfur tuning is installed EGR Emissions Equipment When running H amp S High Sulfur tuning it is not required to unplug or block off the EGR system on your 6 4L Powerstroke to disable it The EGR system is
24. e com in the downloads section for product updates Please find your product application and follow the posted instructions there to update your XRT Pro XRT Pro Installation Manual www hsperformance com SECTION 6 USA ULSD CALIBRATION VEHICLE SPECIFIC FEATURES 2006 2007 5 9L DODGE CUMMINS USA ULSD CALIBRATION Power Levels Power Levels can be adjusted on the fly at the touch of a POWER LEVELS button after Installing the Download to the vehicle To adjust Stock OHP the Power Level select Change Power Level from the Main Menu low 60 HP NOTE The Power Level ratings listed may not be exact for your particular SITE 120 HP vehicle The listed ratings apply to the out of the box tuning that H amp S tuning Performance 200 HP devices are shipped with Any custom downloads may result in different rat ings and can be found at www hsperformance com update instructions Low Boost Fueling This option allows for adjustment of the amount of fuel injected under low boost conditions There are 5 different settings for Low Boost Fueling 0 Lowest Fueling Default 1 Low Fueling 2 Medium Fueling 3 Moderate Fueling 4 High Fueling NOTE The low boost fueling adjustment will affect ALL power levels This option can only be adjusted during the Install Download process Injection Timing This option allows for the adjustment of the maximum allowed injection timing There are 5 different settings for
25. e the diameter of the tire using a tape measure rather than going by the printed tire size In additon using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while enter ing a smaller tire size will cause the factory speedometer to read lower The tire size can be adjusted from 31 to 34 this may change so be sure to visit www hsperformance com for product updates This option only takes a few seconds to change and can be adjusted at any time from the Tire Size Calibration menu TPMS Adjustability Disable Many 2011 2012 6 7L Powerstrokes are equipped with a TPMS or Tire Pressure Monitoring System from the factory This system is designed to alert the driver of a problem with the vehicles tire pressures but is often a nagging inconvenience for those individuals wanting to run lower pressures or get rid of the TPMS sensors altogether With your H amp S tuning device you have full control of the TPMS Front and rear tire pressures are independently adjustable from 0 120 PSI as well as the option to disable the TPMS com pletely ifremoving the TPMS sensors from the vehicle This option only takes a few seconds to change and can be adjusted at any time from the Tire Pressure Calibration menu NOTE TPMS adjustments will not take full effect on a stationary vehicle Once adjustments have been made it can take up to 5 miles of driving before changes take ef
26. essory system after the key has been turned off Fog Lights W High Enable Disable the fog lights staying on when high beams are being used Daytime Lights Enable Disable the daytime running lights Seat Belt Minder Enable Disable the chime for the drivers seat belt system This feature will not dis able the seat belt light NOTE fany special feature is already listed as Enabled but is not functioning correctly you may need to disable the feature cycle the key and re enable the feature to make it function properly If it still does not work your vehicle may not be equipped with the hardware required for the special feature Stationary Idle Adjust The Stationary Idle Adjust Menu will allow you to adjust the idle speed of your vehicle while in Park or Neutral using your H amp S tuning device Choose the desired idle speed and select Set to set the idle speed to the chosen RPM Idle speed can be adjusted from 700 RPM to 1500 RPM Overdrive Transmission Software Did you know that your H amp S tuning device also has the capability of tuning your transmission If your 6 7L Cummins is equipped with the 68RFE Automatic Transmission you may want to check out our Overdrive Transmission Software Custom tailored to mate with H amp S engine tuning the 6 7L Overdrive software includes boosted line pressures modified full and part throttle torque converter lock unlock strategies adjusted full and part throttle shift points adjusted full
27. eter to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In addition using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower The tire size can be adjusted from 25 5 to 45 This option can only be seen changed after the Download is Installed to the vehicle This option only takes a few seconds to change and can be adjusted at any time from the Tire Size Calibration menu Special Functions Features Your H amp S tuning device has the capability of Enabling Disabling factory vehicle features These features can be found in the Special Functions Menu These features can only be seen changed after the Download is Installed to the vehicle Below is a short description of each feature TPMS Enable Disable the Tire Pressure Monitoring System Optical Chirp on Lock Enable Disable the parking lights flashing when locking the vehicle Horn Chirp on Lock Enable Disable the horn chirp when locking the vehicle XRT Pro Installation Manual www hsperformance com Set Head Lamp Delay Enable Disable the head lamp delay Accessory Delay Enable Disable the shut off delay of your radio and acc
28. f no DICs are displayed you can simply press the Go Back button to return to the main menu For a complete list of DTC descriptions please visit the Tech section of our website www hsperformance com o Hi pro eo EE EE o j i i rE Di 4 Go Back DTC Diagnostic Trouble Codes There are no DTCs Detected A i dr al i coe SS __ E Y DIESEL DOWNLOADER sio 1 888 628 1730 e XRT Pro Installation Manual SHOW SETTINGS The Show Settings menu will allow you to see Vehicle Information and System Information 1 GoBack SETTINGS Vehicle 08 10 Ford 6 4L VIN 123456789101112131415 ECM P N TCM P N Serial N A MEM C216 HW 1 3b Version SW 1 03 0 TV 6 4 20 6 4 Power Stroke Tune Status Installed Application 08 10 Ford 6 4L PowerStroke T V This number is the Tuning Version It will change as H amp S updates the tuner software To see the latest tuner ver sion on your XRT Pro go to Show Settings and scroll down MICRO SD CARD The Micro SD card should only be taken out of the XRT Pro to perform internet upgrades It is the primary means of performing internet upgrades for the XRT Pro In case a Micro SD Card is lost or broken a new Micro SD Card can be purchased from H amp S Performance WEB UPDATES Remove the Micro SD from your XRT Pro Connect your Micro SD to your personal computer with the included Micro SD to USB adapter to install software updates Visit www hsperformanc
29. fect 1 888 628 1730 e XRT Pro Installation Manual 2011 2012 6 7L Ford Powerstroke Specific Features Continued gt gt Transmission Tuning Did you know that your H amp S tuning device also has the capability of tuning your transmis sion Our transmission tuning for the 6R140 automatic transmission is custom tailored to mate with H amp S engine tuning Some features include boosted line pressures modified full and part throttle lock unlock strategies adjusted full and part throttle shift points adjusted full and part throttle shift firmness and modified torque management tables All changes are designed to keep more power directed to the road instead of wasted in heat and friction On our test trucks we have seen 0 2 to 0 3 second quicker 1 4 mile times JUST from the ad dition of H amp S transmission tuning An additional unlock fee may apply see www hsperformance com for details Transmission Relearn The 6R140 automatic transmission on the 2011 2012 6 7L Powerstroke has what is called Adaptive Memory and is constantly learning and adapting to different horsepower levels temperatures driving habits etc If you selected to tune the transmission during the Install Download process the Transmission Adaptive Memory is automatically reset when the download completes We highly recommend performing a Transmission Relearn procedure after installing H amp S transmission tuning to help the transmission perform correctly with the added
30. ff of the sensor but DO NOT UNPLUG THIS SENSOR Un plugging of the Pressure Sensor may result in erratic engine operation and loss of power Mini Maxx Installation Manual e www hsperformance com UREA SCR System On the 2011 2013 6 6L LML Duramax there is a UREA system that needs to be unplugged when running High Sulfur tuning The UREA system must at least be unplugged but can be completely removed from the vehicle if desired Failure to unplug the UREA system may result in a check engine light and or dash messages erratic engine operation and loss of power Follow these instructions to unplug the UREA system 1 The urea injector is located between the CAT and DPF above the torsion bar cross member Unplug the electrical connection and the urea line SNOLWUSITYD AS a ui and1NS HOIH 2 The main urea harness is the large black harness located near the urea injector above the urea tank Flip the large gray locking tab to disconnect the harness EGR Emissions Equipment If you are installing H amp S High Sulfur tuning you must unplug the EGR system on your 6 6L LML Duramax if not installing a complete EGR delete Failing to do so may result in erratic engine operation and loss of power Please follow these instructions carefully to unplug and disable the EGR system 1 888 628 1730 mm Mini Maxx Installation Manual 1 Unplug 3 EGR harnesses two are brown with a yellow locking tab one is black with a red lo
31. function this may change so be sure to visit www hsperformance com for product updates This option can only be changed during the Install Download process Tire Size Calibration Not currently available for the 2011 2013 6 6L LML Duramax This may change so be sure to visit www hsperformance com for product updates This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer XRT Pro Installation Manual www hsperformance com reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In addition using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speed ometer to read lower This option can only be adjusted during the Install Download process NOTE On some vehicles entering a tire size larger than 35 may cause the ABS light to illuminate Transmission Reset Relearn The automatic transmission on the 2011 2013 6 6L LML Duramax has what is called Adaptive Memory and is constantly learning and adapting to different horsepower levels temperatures driving habits etc We highly recommend performing a Transmission Reset Relearn procedure after installing H amp S tuning to help the transmission perform correctly
32. ges are de signed to keep more power directed to the road instead of wasted in heat and friction On our test trucks we have seen 0 2 to 0 3 second quicker 1 4 mile times JUST from the addition of the H amp S Overdrive tuning An additional unlock fee may apply see www hsperformance com for details Overdrive Tuning Options 4 5th gear shift point adjustable up or down Light to medium throttle WOT is NOT adjustable 5 levels 1 Lowest 2 Stock shift point 3 Medium 4 Default 5 Highest 5 6th gear shift point adjustable up or down Light to medium throttle WOT is NOT adjustable 5 levels 1 Lowest 2 Stock shift point 3 Medium 4 Default XRT Pro Installation Manual www hsperformance com 5 Highest Line pressure WARNING only designed for built transmissions The factory transmission pump is NOT designed to be run more than 165 170 psi of pressure Our current overdrive tune sets these values to 170psi the pump mechanically will not supply more pressure and will build excess heat and waste energy If they have a modified pump they can use this adjustment to increase clutch holding pressure We have tested up to 250 psi with great results 5 levels 1 Stock 160 psi 2 Default 170 psi 3 200 psi 4 225 psi 5 250 psi Shift Firmness This adjustment will modify the acceleration rate between gear shifts Making them softer or firmer 5 levels 1 Stock 2 Light firm
33. horsepower The 6R140 automatic transmission will eventually learn over time on its own but the relearn procedure gives a good baseline for the adaptive learning and helps to speed up the learning process To perform the relearn procedure please follow these instructions When re training the transmission ALWAYS follow posted speed limits Do NOT at tempt runs in adverse weather conditions such as snow ice rain wind or any other conditions that may affect your vehicles traction or impair your visibility 1 After H amp S tuning is installed perform each of the following 0 80 MPH runs while in the Performance power level During this relearn process you may experience hesitation during shifts hard shifts or defuel patterns all of which are normal 0 80 MPH 25 throttle position then slow down and come to a complete stop 0 80 MPH 50 throttle position then slow down and come to a complete stop 0 80 MPH 100 throttle position then slow down and come to a complete stop The Transmission Relearn procedure is complete NOTE On any vehicle using 3 or larger lift blocks under the rear leaf pack it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower XRT Pro Installation Manual www hsperformance com 2007 5 2010 6 6L LMM DURAMAX USA ULSD CALIBRATION I Power Levels M y Power Levels can be adjusted on the fly at the touch of a POWER LEVELS button after Installing the Downlo
34. icle Install Download gt Special Functions gt Tire Size Calibration Ma Hi Diagnostics gt Show Settings l te gt Update Firmware Before installing the download e Make sure that the XRT Pro is properly plugged in e Make sure that the harness is properly installed e The vehicle battery is fully charged The vehicle iswarmed up to operating temperature XRT Pro Installation Manual www hsperformance com SECTION 3 CHANGING POWER LEVELS Dodge Vehicles Select Change Power Level from the main menu and follow the on screen prompts You will get to a screen as pictured below with two options Ford and GM vehicles Select Change Power Level from the main screen Follow the on screen prompts to change your power level this should only take a few seconds To return to stock select Install download from the main screen Select Return to Stock when prompt ed to return to factory settings and unlock the XRT Pro from the truck GoBack DOWNLOAD MENU 4 Download H amp S Tuning lt Import Export MCC Tuning 4 Return to Stock OEM Tune ah Change Settings This will install the new tuning onto the truck for times when your H amp S Product has been updated on the H amp S website This is also how you can adjust the speed limiter tire size and other options Return to Stock This function will completely return your truck computer to stock This is required to unlock the XR
35. including without any obligations of the SELLER with respect to fitness merchantability and consequential damages or whether or not occasioned by the SELLER s negligence The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages The BUYER acknowl edges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify the SELLER and to hold the SELLER harmless from any claim related to the product purchased Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale of any such products The SELLER assumes no liability regarding the improper installation misuse or misapplication of its products It is the buyer and or installer s responsibility to check for proper installation INTERNET UPDATES H amp S Performance regularly issues free internet updates and custom tunes for the Mini Maxx Please check to see if there are any available for your truck by going to the updates section at www hsperformance com TROUBLESHOOTING Please read and understand all installation instructions before proceeding with the installation If you have questions during the installation of this product please call H amp S Performance support at 1 888 628 1730 XRT Pro Installation Manual e www hsperformance com LIMITATION OF WARRANTY H amp S Performance LLC SELLER gives Limited Warranty as
36. les entering a tire size larger than 35 may cause the ABS light to illuminate Transmission Reset Relearn The automatic transmission on the 2007 5 2010 6 6L LMM Duramax has what is called Adaptive Memory and is constantly learning and adapting to different horsepower levels temperatures driving habits etc We highly recommend performing a Transmission Reset Relearn procedure after installing H amp S tuning to help the transmission perform correctly with the added horsepower The transmission will eventually learn over time on its own but the relearn procedure gives a good baseline for the adaptive learning and helps to speed up the learning process To perform the relearn procedure please follow these instructions 1 888 628 1730 e XRT Pro Installation Manual 2007 5 2010 6 6L LMM Duramax Specific Features Continued gt gt When re training the transmission ALWAYS follow posted speed limits Do NOT at tempt runs in adverse weather conditions such as snow ice rain wind or any other conditions that may affect your vehicles traction or impair your visibility 1 After you have installed the H amp S tuning turn the key to the ON position From the Main Menu scroll down until you see the Reset Transmission option Select Reset Trans mission and follow the on screen instructions to reset the transmission adaptive memory 2 After the transmission reset is complete it is recommended to perform each of the follow ing 0 80
37. looking at the intake manifold and faces towards the front of the vehicle 4 Unplug the EGR solenoid wiring harness The connector is BROWN in color Mini Maxx Installation Manual e www hsperformance com 2010 2012 6 7L DODGE CUMMINS HIGH SULFUR CALIBRATION Power Levels Change Power Level from the POWER LEVELS POWER LEVELS Main Menu and follow the on Stock 0 HP Stock 0 HP SSE TUL IO TOW 60 HP TOW 25 HP NOTE The Power Level ratings listed may not be exact for your particular Street 120 HP Street 50 HP vehicle The listed ratings apply to the Performance 175 HP Performance 75 HP out of the box tuning that H amp S tuning devices are shipped with Any custom downloads may result in different ratings and can be found at www hsperformance com update instructions Emissions Selection Most 2010 2012 6 7L Cummins are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the e
38. n Relearn procedure is complete NOTE On any vehicle using 3 or larger lift blocks under the rear leaf pack it is HIGHLY RECOMMENDED to install traction bars With any added horsepower failure to do so may result in harsh shifting and may cause premature transmission and or driveline damage XRT Pro Installation Manual www hsperformance com 2011 2012 6 7L FORD POWERSTROKE USA ULSD CALIBRATION Power Levels 7 gt To adjust the Power Level select Change Power Level from POWER LEVELS the Main Menu and follow the on screen instructions NOTE The Power Level ratings listed may not be exact for your particular SWE Sessoms Uli vehicle The listed ratings apply to the out of the box tuning that H amp S tuning TOW 40 HP devices are shipped with Any custom downloads may result in different rat Streel 80 HP SUI M ings and can be found at www hsperformance com update instructions Performance 120 HP Speed Limiter _ d This option allows for the adjustment of the factory speed limiter Most 6 7L Powerstroke trucks have a 98 MPH speed limiter from the factory The limiter can be adjusted from 55 MPH to 200 MPH This option can only be changed during the Install Download process Tire Size Calibration This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measur
39. ni Maxx Installation Manual e www hsperformance com 2007 5 2010 6 6L LMM DURAMAX HIGH SULFUR CALIBRATION Power Levels Power Levels can be adjusted on the fly at the touch of a POWER LEVELS button after Installing the Download to the vehicle To adjust Stock OHP the Power Level select Change Power Level from the Main Menu TOW eaae 60 HP SEE e 120 HP NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning Performance 175 HP devices are shipped with Any custom downloads may result in different rat ings and can be found at www hsperformance com update instructions Emissions Selection Most 2007 5 2010 6 6L LMM Duramax s are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the exhaust system stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even a loss of power limp mode Ge A E a n
40. ns Equipment Unlike the previous years it is no longer mandatory to unplug the EGR system when installing H amp S High Sulfur tuning You may still unplug the EGR system if desired or the EGR system may be left plugged in without any ill effects The entire EGR system can also be completely removed with an H amp S EGR Delete Kit when running H amp S High Sulfur tuning Injection Timing This option allows adjustment of the Injection Timing Calibration tables There are 5 different settings you can choose from If you skip this adjustment option you will be defaulted to level 3 1 Least Aggressive Stock Setting 2 Less Aggressive 3 Default 4 More Aggressive 5 Most Aggressive NOTE The injection timing adjustment will affect ALL power levels This option can only be adjusted during the Install Download process Mini Maxx Installation Manual e www hsperformance com 2008 2010 6 4L FORD POWERSTROKE HIGH SULFUR CALIBRATION Power Levels Power Levels can be adjusted on the fly at the touch ofa button POWER LEVELS after Installing the Download to the vehicle To adjust the Power StOGK eee eta 0 HP Level select Change Power Level from the Main Menu NOTE The Power Level ratings listed may not be exact for your particular n Ul vehicle The listed ratings apply to the out of the box tuning that H amp S tuning Street 160 HP devices are shipped with Any custom downloads may result in different rat Performanc
41. o choose from To change these options you must repeat the install download process 1 Low This option will shift into high gears at the lowest possible road speed 2 Med This option is the middle range of shift points 3 High This option will shift into high gears at the highest possible road speed Mini Maxx Installation Manual e www hsperformance com Power Levels To adjust the Power Level select Change Power Level from POWER LEVELS the Main Menu and follow the on screen instructions HO 0 HP NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning WOW cece ta 50 HP devices are shipped with Any custom downloads may result in different rat Street 100 HP ings and can be found at www hsperformance com update instructions Performance 150 HP Emissions Selection Most 2011 2012 6 7L Powerstrokes are equipped with an emissions system designed to run Ultra Low Sulfur Diesel ULSD Fuel If you have removed or modified this emissions system or plan to immediately after installing this device proper tuning must be installed or the vehicle will not operate correctly Select REMOVED at this option for a modified emissions system and high sulfur fuel use Select PRESENT if your emissions system requires ULSD fuel Exhaust Emissions Equipment When running ULSD tuning it is required that all sensors located in the exhaust system
42. rdrive tuning An additional unlock fee may apply see www hsperformance com for details XRT Pro Installation Manual e www hsperformance com 2007 5 2009 6 7L DODGE CUMMINS USA ULSD CALIBRATION Power Levels Pa To adjust the Power Level select Change Power Level fromthe POWERLEVELS Main Menu and follow the on screen instructions Stock 0 HP NOTE The Power Level ratings listed may not be exact for your particular vehicle The listed ratings apply to the out of the box tuning that H amp S tuning l 40 HP devices are shipped with Any custom downloads may result in different rat Street 80 HP ings and can be found at www hsperformance com update instructions Performance 120 HP Speed Limiter C This option allows for the adjustment of the factory speed limiter Most 6 7L Cummins trucks have a 106 MPH speed limiter from the factory The limiter can be adjusted from 20 MPH to 200 MPH This option can only be adjusted during the Install Download process Tire Size Calibration This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In additon using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer
43. sperformance com update instructions Speed Limiter This option allows for the adjustment of the factory speed limiter Most 6 4L Powerstroke trucks have a 95 MPH speed limiter from the factory The limiter can be adjusted from 55 MPH to 200 MPH This option can only be adjusted during the Install Download process Tire Size Calibration This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most accurate speedometer reading when using non stock sized tires it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size In additon using a GPS is a great way to dial in your factory speedometer Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower The tire size can be adjust ed from 25 to 45 This option can only be adjusted during the Install Download process Shift Schedule This option allows you to change the shift logic of your automatic transmission There are 2 options To change these options you must repeat the install download process 1 Schedule1 This option will lock the torque converter in 4th gear under normal driving and keep it locked through 5th gear 2 Schedule 2 This option will not lock the torque converter until 5th gear under normal driving NOTE The Easy Power Tuning also has Easy shift schedule I
44. ssscesssesees 9 Section 4 Exploring the Menu SysteM scsscsssccsssesscsssssssssssssssscssesees 10 Section 5 Other XRT Pro Features 11 Boe Elgo E E R E E E A T E E 11 SSA AA E E EAN E E E 12 Niki 12 Mero O CI eiae 12 WED UPAESI a 12 Section 6 USA ULSD Calibration Vehicle Specific Features 13 2006 2007 5 9L Dodge CUMMINS esssessessscessoesseesscesscesscesccesocesseesocesoeeso 13 2007 5 2009 6 7L Dodge CUMMINS esseesseessoesseesscessoesscesocesocesseesocesoceso 15 2010 2012 6 7L Dodge CUMMINS sesssesseessocssoesseesscessoesseesocesocesseesocesoeeso 18 2003 2007 6 0L Ford Powerstroke csssccsssscssscesssccsssccessscessecessseeees 20 2008 2010 6 4L Ford Powerstroke csscccsssscssssesssccsssscessscessecessseeees 21 2011 2012 6 7L Ford Powerstroke csscccssscssscesssecssscccssscessecesseeeees 23 2007 5 2010 6 6L LMM DUuramad ccsssscccssssccssssssccessssscccssssscsssssesseees 25 2011 2013 6 6L LML Duramax ccssccoccssssscssssssecsssssscsscssssccsssssecesess 26 Section 7 High Sulfur Calibration Vehicle Specific Features 28 2007 5 2009 6 7L Dodge CUMMIDNG sssccsssscssscessrccsssscsssscsssseessseeees 29 2010 2012 6 7L Dodge CUMMINS sesseesseessocssoesseesscesscesscesocesocesseesocesoesso 31 2008 2010 6 4L Ford Powerstroke csscccsssscssscesssccsssscessscessecesseceees 33 2011 2012 6 7L Ford Powerstroke
45. stallation Manual 2007 5 2009 6 7L Dodge Cummins Specific Features Continued gt gt been turned off Fog Lights W High Enable Disable the fog lights staying on when high beams are being used Daytime Lights Enable Disable the daytime running lights Seat Belt Minder Enable Disable the chime for the drivers seat belt system This feature will not dis able the seat belt light Auto Door Lock Enable Disable the automatic door locking when the vehicle reaches certain speeds Unlock Driver Door Enable Disable unlocking only the driver door when pushing the unlock button the key fob When enabled the unlock button on the key fob will need to be pressed twice in order to unlock all doors Idle Up Auto Only Enable Disable the use of the cruise control buttons to control idle RPM Follow your vehicle owners manual to use this feature Overdrive Transmission Software Did you know that your H amp S tuning device also has the capability of tuning your transmission If your 6 7L Cummins is equipped with the 68RFE automatic transmission you may want to check out our Overdrive Transmission Software Custom tailored to mate with H amp S engine tuning the 6 7L Overdrive software includes boosted line pressures modified full and part throttle torque converter lock unlock strategies adjusted full and part throttle shift points adjusted full and part throttle shift firmness modified torque management tables and much more All chan
46. stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even a loss of power limp mode When running High Sulfur tuning it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses These sensors can also be removed completely with the factory exhaust if desired On the 6 7L Powerstroke there are usually 3 EGT Sensors 1 NOX Sensor 1 UREA Injector and 1 Pressure Sensor NOTE The vehicle will not run with sensors removed unless High Sulfur tuning is installed UREA SCR System On the 2011 2012 6 7L Powerstroke there is a UREA system that can be unplugged or removed completely when running High Sulfur tuning The UREA system may also be left plugged in with no ill effects EGR Emissions Equipment If you are installing H amp S High Sulfur tuning you must unplug the EGR system on your 2011 2012 6 7L Powerstroke if not installing an EGR delete Failing to do so may result in damage to your EGR parts 1 888 628 1730 mm Mini Maxx Installation Manual 2011 2012 6 7L FORD POWERSTROKE HIGH SULFUR CALIBRATION f Ve ep _ dr a mal Y E a Please follow these instructions carefully to unplug and disable the EGR system 1 Unplug Orange EGR harness found on top of the EGR cooler assembly The yellow lock tab must be slid out before the harness can be unplugged Si HIGH SULFUR Mi
47. t is NOT adjustable Shift Point This option will allow you to modify shift points for the 3 4 and 4 5 shifts There are 3 options to choose from To change these options you must repeat the install download process 1 888 628 1730 e XRT Pro Installation Manual 1 Low This option will shift into high gears at the lowest possible road speed 2 Med Thisoption is the middle range of shift points 3 High This option will shift into high gears at the highest possible road speed TPMS Adjustability Disable Many 2008 2010 6 4L Powerstrokes are equipped with a TPMS or Tire Pressure Monitoring System from the factory This system is designed to alert the driver of a problem with the vehicles tire pressures but is often a nagging inconvenience for those individuals wanting to run lower pressures or get rid of the TPMS sensors altogether H amp S Performance has a designed solution for those individuals By using your H amp S tuning device and a 6 4L Powerstroke TPMS Adapter Part 709913 you will have full control of the TPMS Front and rear tire pressures will be independently adjustable from 0 100 PSI as well as the option to Disable the TPMS completely if removing the TPMS sensors from the vehicle All changes to the TPMS must be done with the 6 4L Powerstroke TPMS Adapter in place and the Adapter must be removed after changes are made to resume normal tuner function Transmission Relearn The 5R110 automatic transmission on the 200
48. the Injection Timing 0 18 degrees 1 24 degrees 2 26 degrees Default 3 28 degrees 4 32 degrees NOTE The injection timing adjustment will affect ALL power levels This option can only be adjusted during the Install Download process 1 888 628 1730 e XRT Pro Installation Manual 2006 2007 5 9L Dodge Cummins Specific Features Continued gt gt Speed Limiter This option allows for the adjustment of the factory speed limiter Most 5 9L Cummins trucks have a 106 MPH speed limiter from the factory The limiter can be adjusted from 50 MPH to 200 MPH This option can only be adjusted during the Install Download process Rev Limiter This option allows for the adjustment of the factory rev limiter Most 5 9L Cummins trucks have a 3500 RPM rev limiter from the factory The limiter can be adjusted from 3000 RPM to 5000 RPM This option can only be adjusted during the Install Download process Torque Management Automatic Transmission Only This option allows for the disabling of the vehicles torque management for those equipped with automatic transmissions This is recommend for those running standalone aftermarket TCM trans mission packages but will also slightly improve throttle response on a stock truck NOTE By turning the torque management OFF the PRNDL display will be lost Tire Size Calibration This option allows for the re calibration of the factory speedometer to adjust for non stock sized tires For the most
49. xhaust system stay in place and plugged in otherwise you may experience a Check Engine Light CEL and even a loss of power limp mode When running High Sulfur tuning it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses These sensors can also be removed completely with the factory exhaust if desired On the 2010 2011 Pickup there are usually 3 EGT Sensors 2 02 Sensors and 1 Pressure Sensor 2011 Cab amp Chassis UREA System On the 2011 Cab amp Chassis there is usually an additional NOX sensor as well as a UREA sys tem that needs to be unplugged when running High Sulfur tuning The UREA system must at least be unplugged but can be completely removed from the vehicle if desired Failure to unplug the UREA system may result in a check engine light and or dash messages Follow these instructions to unplug the UREA system 1 888 628 1730 Mini Maxx Installation Manual y Pai f vela 7 e nol N on Ti J 1 Locate the wiring harness with the YELLOW sliding lock tab on the Urea pump assembly The pump assembly is located near the bottom of the filler neck support a 2 Slide the yellow lock tab DOWN to dis engage the lock and unplug the harness For complete UREA System Removal instruc pi tions visit www hsperformance com tech CCUrea pdf HIGH SULFUR _ 157 CALIBRATIONS EGR Emissio

Download Pdf Manuals

image

Related Search

Related Contents

SERVICE MANUAL  Stamina Products RECUMBENT BIKE User's Manual  Getting Started with WTK 5.2 An Employee Guide for Power Users  Faits divers sur les produits chimiques pour faire  取扱説明書  Mithras - Phenix Research Products  Friedrich ZQ10 Air Conditioner User Manual  D10 conc  IPSiO NX51 PDFダウンロード  

Copyright © All rights reserved.
Failed to retrieve file