user`s manual
Contents
1. the antenna or cable system during a lightning storm or when itis left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges 11 OVERLOADING Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 12 HEAT The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 13 DAMAGE REQUIRING SERVICE The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled onto the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally 14 SERVICING The user should not attempt to service the unit beyond those methods described in the user s manual Opening or removing covers will expose you to dangerous voltage and other hazards Service methods not covered in the user s manual should be referred to qualified service personnel 15 SAFETY CHECK Upon completion of any service or repair to the unit ask the service technician to perform safety checks to determine that the product is in proper working condition 16 BUILT IN BATTERY CARE This device contains a2. unstable table stand tripod or bracket This may result in serious personal injuries and damage tothe unit 5 VENTILATION The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 6 PERIODS OF NON USE If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion 7 OBJECTS AND LIQUID ENTRY Care should be taken so that external objects do not fall into and liquids are not spilled onto any openings or vents located on the product 8 POWER SOURCE The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit If you are not sure please consult the dealer or local power company 9 POWER CORD PROTECTION Power supply cord should be routed so that itis not likely to be walked on or pinched by items placed upon or against them It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet Page 6 Safety Information 10 LIGHTNING Unplug the unit from the wall outlet and disconnect
3. you hear an ascending audible tone and the Bluetooth LED light starts blinking Topower the speaker off press and hold the button for 3 seconds until you hear a descending audible tone The Bluetooth LED will shut off Power Saving Mode The Upbeat will automatically enter power saving mode if no audio is played for 30 minutes Press and hold power button 3 seconds to wake the speaker up Page 9 Operational Instructions Bluetooth Operation Bluetooth Device Compatibility Upbeat connects with most Bluetooth devices that support the A2DP profile including iPad iPhone iPod touch devices and most smartphones laptops and tablets Setting Up Your Upbeat for Pairing 1 Power on the Upbeat speaker 2 TheblueLED light will start to flash indicating that Upbeat is now ready to be paired with your Bluetooth device Pairing a Bluetooth Device for the First Time 1 Navigate to the Bluetooth manager on your Bluetooth device 2 Search Bluetooth devices and select Upbeat to start connecting 3 Once paired Upbeat will beep and the Bluetooth LED light will turn solid blue 4 Your Bluetooth device is now paired connected and ready to stream audio to the speaker system 5 Although Upbeat can only stream audio from one device ata time it is capable of being paired with multiple devices Note If your device asks for a PIN code enter OOOO Connecting a Paired Bluetooth Device 1 You will only need to
4. ICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE WARRANTY Page 16 Warranty Information Some states do not allow the exclusion or limitations of incidental or consequential damages or limitations on how long the warranty lasts In these cases the above exclusions or limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Obtaining Service To obtain service product literature supplies or accessories please call 1888 920 8680 or visit our website www att com electronics to create a ticket for exchange repair Please make sure to provide the date of purchase model number anda brief description of the problem Our customer service representative will contact you or send detailed return instructions Concept 101 LLC does not warrant that the docking station will work properly in allenvironmental conditions and makes no warranty and representation either impliedor expressed withrespect tothe quality performance merchantability or fitness for a particular purpose other than the purpose identified within this user s manual Concept 101 LLC has made every effort to ensure that this user s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred Information in this user s manual is subject to change without notice and does not represent a commitment on the part of Concept 101 LLC Co
5. at amp t user s manual Upbeat model BTS100 Portable Bluetooth Speaker System What s Included Unpack the speaker system and make sure all accessories are put aside so they will not be lost AC Adapter 3 5mm Audio Cable Thank you for purchasing Upbeat BTS100 Portable Bluetooth Speaker System Features High powered Bluetooth speaker Easy pairing Bluetooth 4 0 with stereo A2DP APTX compatible HD stereo Auxiliary input to play music from any device witha headphone jack USB charging port to charge your media devices Long lasting rechargeable battery Bluetooth Speaker The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc Page 2 Pages Introduction 2 What s Included 3 Safety Information 5 Getting Started Location of Main Unit Controls 8 Power Supply 9 Powering ON OFF 9 Power Saving Mode 9 Operational Instructions Bluetooth Operation 10 Using the Audio Line in Connection Te Using Upbeat to Charge Your Device 13 Troubleshooting 14 Compliance with FCC Regulations 15 Warranty Information 16 Specifications 18 Page 4 Safety Information Warning TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash WARNING To reduce The exclamation and arrowhead the risk of electric po
6. d select Upbeat You will not be asked to enter the PIN code again Out of Range or Lost Signal If the music device is out of range of Upbeat or if there is something blocking the Bluetooth signal the Bluetooth LED light will flash to indicate that the Bluetooth connection with Upbeat has been lost To avoid alost connection 1 Move the music device back into range and or make sure there s a clear line of sight between Upbeat and the Bluetooth device 2 If the connection is lost the connection will need to be reestablished Follow the directions under Reconnecting Your Device Page 11 Operational Instructions Operational Instructions Using the Audio Line in Connection aux input Using Upbeat to Charge Your Device You can connect the audio output of an external device such as a MP3 player Upbeat includes a USB port on the back to allow you to charge your media or smartphone to Upbeat for listening to the audio of that device through the device Plug Upbeat into a wall outlet and then connect your device to the high quality amplifier of the speaker system speaker using a USB cable not included Note Power output of the USB port is 500 mA Media devices that require more power may not charge through this USB port Useastandard stereo headphone 3 5mm cable to connect the hneadphone out or audio line out of the device to the aux in jack of this Speaker system Turnonthe speaker system and the external
7. device eg MP3 player or Smartphone Makesure the speaker system is not connected to any Bluetooth devices Start playback of the external device and adjust the volume of the docking Station to the desired level Remember to switch off the speaker system when you are finished using the external device Note The volume controls on your media device work separately from the volume controls on Upbeat Page 12 Page 13 Troubleshooting Symptom Solution Music is not streaming Make sure your Bluetooth device has A2DP profile over Bluetooth Check if both devices are paired and connected over Bluetooth Make sure there isn t a 3 5mm cable connected to the aux input on the back of the speaker Restart the BTS100 to auto connect with your Bluetooth device No power Verify BTS100 is plugged in properly and into a proper power source Battery is not charging VerifyBTS100 is plugged in properly and into a proper power source My mobile device is Make sure the BTS100 is plugged into a wall outlet not charging when The USB port will not charge your mobile device connected to the USB unless the BTS100 is plugged in port on the BTS100 Thebuiltin USB port supports up to 500mA output power Some larger devices ie tablets may require more output power in order to charge Remarks If troubleshooting does not eliminate the problem disconnect the DC IN plug from the back of un
8. int within the Symbol within the shock do not remove triangle isa warning triangle is a warning cover or back No sign alerting you sign alerting you of user serviceable parts of important dangerous voltage inside Refer servicing instructions inside the product to qualified service accompanying the personnel product NOTES Caution symbols are printed on rear of unit Please refer to user s manual This device complies with Part 15 of the FCC Rules Operation is subject to the condition that this device does not cause harmful interference Page 5 Safety Information Important Safety Instructions When used inthe directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read allsafety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in this user s manual and onthe unit 1 CLEANING Unplug the unit from the wall outlet before cleaning Clean the unit using adamp cloth do not use liquid or aerosol cleaners 2 ATTACHMENTS Donot use attachments not recommended by the manufacturer 3 WATERAND MOISTURE The unit should not be used near water For example near a bathtub washbowI kitchen sink laundry tub swimming pool or in a wet basement 4 PLACEMENT Donot place the unit on an
9. it and reconnect it after a few seconds This resets the unit to it s factory default settings and results in the deletion of all previous settings In case the problem still exists see warranty information on pages 16 and 17 to obtain service Page 14 Compliance with FCC Regulations aAution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment The equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate Radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to Radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to Radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet ona circuit different from that to which the receiver is c
10. ncept 101 LLC reserves the right to make improvements to this user s manual and or to the products described in this user s manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete please contact us through our website Page 1 Powersupply DC 16V 1 8Amps through built in DC jack External AC power adapter 1OOV 240V 50 60Hz Speaker Impedance 8 Q 2 0 Speaker x2 Bluetooth version 4 0 Bluetooth compatibility Bluetooth 2 0 or above device with A2DP AVRCP _J ZF atat www att com electronics purchase date place of purchase 2014 Concept101LLc All Rights Reserved AT amp T andthe AT amp T logo are trademarks of AT amp T Intellectual Property licensed to Concept 101LLC New York New York 10018 Issue 1 AT amp T 12 2014 Page 18
11. onnected Consult the dealer or an experienced Radio television technician for assistance This equipment complies with FCC s RF radiation exposure limits set forth for an uncontrolled environment The antenna s used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter Installers must ensure that 20 cm separation distance will be maintained between the device excluding its handset and users THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE If at any time in the future you should need to dispose of this product please note that waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your local authority or retailer for recycling advice Page 15 Warranty Information Limited Warranty The AT amp T brands are used under license Any repair replacement or warranty service and all questions about this product should be directed to Concept 101 LLC at www att com electronics or call 1 888 920 8680 from the USA or Canada Concept 101 LLC warrants to the original purchaser that the product will be free from defects in material parts and workmanship for the period designated for this product The warranty commences the day the productis purcha
12. pair your Bluetooth device with Upbeat one time 2 Thenext time your Bluetooth device and Upbeat are in range of each other and the Bluetooth feature is turned on they will automatically connect 3 The speaker system will only automatically connect to the last Bluetooth device it was connected to 4 If your paired device does not automatically connect navigate to the Bluetooth menu on your device and select Upbeat from the list iPad iPhone and iPod are registered trademarks of Apple Inc Page 10 Operational Instructions Playing Audio from Your Bluetooth Device 1 Once your Bluetooth device is connected to Upbeat simply start playing your music movie or game and all audio will automatically be played through Upbeat 2 Press to play pause the audio 3 Press or to adjust the volume level of the audio 4 Keep in mind that Upbeat has up to a 30 foot Bluetooth wireless range Note The volume controls on your media device work separately from the volume controls on Upbeat Disconnect your Bluetooth device To disconnect your Bluetooth device from the speaker turn off the Bluetooth feature of your connected device or press and at the same time The Bluetooth LED indicator will start to flash Reconnecting Your Device If youmove out of range or turn off the Bluetooth feature on your device the speaker system will disconnect from your device To reconnect simply access the Bluetooth Manager on your device an
13. rechargeable Lithium ion battery The battery can be charged and discharged hundreds of times Unplug the charger from the electrical outlet and product when not in use Do not leave a fully charged battery connected to a charger since overcharging may shorten its lifetime Leaving the product in hot or cold places will reduce the capacity and lifetime of the battery Page Getting Started Location of Main Unit Controls POWER ON OFF PLAY PAUSE Button VOLUME Button VOLUME Button Battery LED Indicator Bluetooth LED Indicator USB Port AUX IN Jack DCIN Jack oom s ON Page 8 Getting Started Power Supply Charging Upbeat 1 Connect the supplied AC adapter to the back of Upbeat 2 Plug the supplied AC adapter into a wall power outlet to begin charging Upbeat s internal battery 3 Thebattery LED indicator light will turn orange while charging and will turn green when the battery is fully charged Note Full charge time is approx 4 hours LED Status Indicator BluetoothLED Indicator Blinking Blue LED Bluetooth on with no connection Ready to pair Solid Blue LED Bluetooth paired and connected Battery LED Indicator Orange LED Charging When plugged into a wall outlet Green LED Fully charged When plugged into a wall outlet Red LED Low battery When running on the built in battery Powering ON OFF To power the speaker on press and hold the button for 3 seconds until
14. sed and covers upto a period of one 1 year 90 day Labor and 1 year Parts Concept 101 LLC agrees that it will at its option replace the defective product with either a new or remanufactured docking station equivalent to your original purchase during the warranty period Should the Parts warranty period exceed the Labor warranty period Concept 101 LLC will supply at no charge for the remainder of the Parts warranty any new or remanufactured replacement parts as required by the product During this period all labor and service charges will become the responsibility of the customer Exclusions This warranty does not apply to the appearance or exterior of the product which may have been damaged or defaced altered or modified in design or construction This warranty does not apply if the serial number is altered or removed or if there is any damage due to power line surge user damage to the AC power cord connection to improper voltage source general misuse accidents or repair attempts by unauthorized service agents Other exclusions include ear pads rechargeable and non rechargeable batteries REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER Concept 101 LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PART
Download Pdf Manuals
Related Search