Quick Reference Guide
Contents
1. Press or to change the graph to the highs and lows for the current and last 25 hours days months or years Press HI LOW to switch between highs and lows The time and date change as you move backward and forward in time NOTE Not all highs and lows are available for all weather variables See Vantage Vue Console Manual for details Press DONE to exit the Graph Mode 16 WAU Highs amp Lows To view highs and lows 1 Press HI LOW The time and date of the DAY HIGH for the currently selected weather variable along with a graph showing the highs for the last 25 hours days months or years is displayed 2 Select a variable 3 Press HI LOW or or to scroll between Day Highs e Day Lows Month Highs e Month Lows Year Highs e Year Lows The time and date changes as you move between the various highs and lows NOTE Not all highs and lows are available for all weather variables See Vantage Vue Console Manual for details 4 Press lt or gt to scroll through the dots on the graph The time and date will change and the corresponding dot on the graph will flash Press DONE to exit the HIGH LOW mode 17 eV Time Date Sunrise Sunset TIME Press TIME to toggle between e Current Time amp Date e Times of Sunrise amp Sunset vone OD Press DONE to Accept an alarm setting e Silence an alarm Exit the alarm screen e Exit the graph screen Exit the high low screen e Accept a calibratio2. RECEIVING FROM Displays the transmitter IDs the console is currently receiving It may take several minutes to display all IDs Setup Mode ACTIVE TRANSMITTERS Press lt or gt to select ID use or to set to ON to receive from that station or OFF Press GRAPH to change station type ISS VP2 WIND RETRANSMIT Press or to set the retransmit function ON or OFF LATITUDE amp LONGITUDE Press lt or gt to move between segments Press or to change the value of the flashing segment Press 2ND and UNITS to toggle between NORTH and SOUTH for latitude or EAST and WEST for longitude ELEVATION Press lt or gt to move between segments Press or to change the value of the flashing segment Press 2ND and UNITS to toggle between FEET and METERS BAROMETRIC REDUCTION Press or to change barometric setting types NOAA default ALT SETTING Altimeter or NONE Setup Mode e WIND CUP Change only if you are using a Vantage Pro2 ISS or an anemometer transmitter kit Press or to change wind cup option SMALL LARGE or OTHER e RAIN COLLECTOR Used at factory for calibration e RAIN SEASON BEGINS Press or to change the month e COOLING HEATING DEGREE DAY BASE Press lt or gt to move between segments Press or to change the value of the flashing segment To clear press 2ND and CLEAR Default is dashed COMMENTARY Press or to toggle between t
3. or mb 1 5 mm Hg or more 11 ee Second Press 2ND to select the second key function The second key function is printed above the top keys and below the bottom keys The BD icon vill appear near the time and date After you press another key the icon will disappear If you wish to select another second key function you must press 2ND again The icon will also time out and disappear from the screen if you do not press another key within a few seconds Whenever you see Press 2ND and Another Key Press and release 2ND and then immediately press the other key Press 2nd and or to Change the console s contrast lighter or darker The changes are subtle and may require several presses ee 12 HEAT iz Heat Index DEW EID vew roint CHILL cD Wind Chill Press 2ND and HEAT to Display Heat Index Press 2ND and DEW to Display Dew Point Press 2ND and CHILL to Display Wind Chill Press 2ND and UNITS to change unit of measure There are two different units of measure 0 F 0 C All temperature related readings outside and inside temperature wind chill heat index and dew point will read in the same unit of measure Changing one from F to C or vice versa changes all others 13 ET Evapotranspiration CD ET Optional Evapotranspiration measurements can only be accessed if the Vantage Vue Console is listening to a Vantage Pro2 Plus ISS or Vantage Pro2 with solar radiation sen
4. Vantage VUE J Console Za Quick Reference Guide For more detailed information see your Vantage Vue Console manual 3465 Diablo Ave Hayward CA 94545 USA DAVISE willl 510 732 9229 www davisnet com Davis In Current Weather Mode Moon phase alarm amp forecast icons Time amp Date Sunrise Sunset Arrow shows which variable is selected Inside amp Outside Temperature 1 Wind Rose Compass Antenna icon shows active transmission Graph of selected variable ET optional available only when used with a Vantage Pro2 Plus or Vantage Pro2 ISS with Solar Radiation sensor T Iam 7 I pad paii a D ia 931 Ve o But l Tra _ INSIDE OUTSIDE nside amp Outside nw 9 Humidit oN o a 7 idity f a id Barometric go 1 e L pressure amp trend te J CHILL Rain data amp T IF m4 ETS Oe sA o Bi LAI Lafin WIND Wind Chill Dew beer AR OT f v Point Heat Index d Weather Center T g with additional a Si i information Icons Forecast Icons tt Ed lt gt gt 8 Mostly Clear Partly Cloudy Mostly Cloudy Rain Snow See the Vantage Vue Console Manual for a list of all the forecast icons Moon Phase Icons OOOOOVId90 0 New Waxing First Waxing Full Waning Last Waning New Moon Crescent Quarter Gibbous Moon Gibbous Quarte
5. gle between e Wind Speed e Wind Direction degrees Press 2ND and UNITS to change unit of measure There are four different units of measure for wind speed 0 mph 0 0 m s 0 km h 0 knots On the compass rose amp Current Wind Direction gt Dominant Wind Direction for a ten minute period within the last hour If dominant wind direction varies up to six arrows representing six ten minute periods may be shown gt Current wind direction is the same as one of the dominant wind directions Press RAIN to toggle between e Rain Rate current rate e Rain Day rain accumulated since midnight e Rain Month rain accumulated month to date e Rain Year rain accumulated year to date Press 2ND and UNITS to change unit of measure There are two different units of measure for rain values 0 00 in 0 0 mm Changing the unit of measure for rain changes ET units as well See ET for more information 10 E Barometer Press BAR to select e Barometric Pressure Press 2ND and UNITS to change unit of measure There are four units of measure for barometric pressure 0 00 in 0 0 mm 0 0 hPa and 0 0 mb Barometric Trend Arrow shows change over the last three hours Increase of 0 06 Hg 2 0 hPa or mb 1 5 mm Hg or more Increase of 0 02 Hg 0 7 hPa or mb 0 5 mm Hg or more Change of less than 0 02 Hg 0 7 hPa or mb 0 5 mm Hg Decrease of 0 02 Hg 0 7 hPa or mb 0 5 mm Hg or more Decrease of 0 06 Hg 2 0 hPa
6. he OFF and ON setting KEY BEEP Press or to toggle between the OFF and ON setting Press lt or gt to change the volume tone of sound BAUD RATE Optional displays with WeatherLink Data logger Press or to set the available baud rate values Default of 19200 is fine for most applications To Exit Setup Mode Press and hold DONE LIGHT Light Press LIGHT to toggle between e Backlight on e Backlight off If the console is running on AC power The backlight will remain on until you turn it off If the console is running on battery power The backlight will remain on as long as you continue pressing various keys If you press any key while the light is on it will stay on for 60 sec onds Otherwise it will stay on for 15 seconds The backlight will not come on when battery power is low Temperature TEMP Press TEMP to toggle between e Outside Temperature e Inside Temperature Press 2ND and UNITS to change unit of measure There are four different units of measure 0 F 0 0 F 0 C 0 0 C All temperature related readings outside and inside temperature wind chill heat index and dew point will read in the same unit of measure Changing one from F to C or vice versa changes all others Only outside and inside temperature can be displayed in tenths of a degree Humidity cD Press HUM to toggle between Outside Humidity Inside Humidity OD ma Press WIND to tog
7. ill appear in the Weather Center Press DONE to silence the alarm To clear all alarm settings Press 2ND then ALARM to enter the alarm mode Press 2ND then press and hold ALARM until dashes appear in all the fields Press DONE to exit the alarm screen To clear a single alarm see page 22 eeeeene sss RRR eee eee ee reece eee 20 Enter or Change sin Alarm or Calibration Press 2ND and SET to Enter or change an alarm or calibration setting Choose Alarm Mode or a weather variable 1 Use and to change the digit within a field Use lt or gt to move to the next field 21 CLEAR To clear daily monthly or yearly HIGH LOW data 1 Press HI LOW 2 Select the variable you wish to clear 3 Press 2ND then CLEAR holding CLEAR down until the digits stop flashing and zeroes or dashes appear in the field To clear a single alarm setting 1 Press 2ND then ALARM 2 Select the alarm reading you wish to clear 3 Press 2ND then CLEAR holding CLEAR down until the digits stop flashing and dashes appear in the fields 4 Press DONE to return to the current weather screen To Clear All 1 To clear all highs and lows and all alarms press WIND then 2ND then CLEAR holding CLEAR down for the entire 6 second countdown until you see CLEARING NOW in the Weather Center 22 TIME Change Units of Measure UNITS Press 2ND and UNITS to Change the unit of measure for a selected variable All temperatu
8. n setting Go to the next screen in the Setup Mode Press and hold DONE to e Exit Setup Mode 1 18 di Set Alarms ALARM To set an alarm 1 Press 2NP then ALARM to enter Alarm Mode The alarm bell icon will appear on the screen In each field you will either see the alarm setting or if no alarm has been set a series of dashes Press a weather variable key or use lt or gt to move between weather variables Except for the time alarm the arrow icon displays next to the variable you have selected Press HI LOW to switch between high and low alarms Note Not all alarms are available for all weather variables See Vantage Vue Console Manual for details Press 2ND then SET to enter or change an alarm setting Use or to change the digit within a field Use lt or gt to move to the next field Press DONE to accept the alarm setting Repeat steps 2 4 to set another alarm or press DONE again to exit the alarm screen 19 eeV Silence amp Clear ga Alarms ALARM When an alarm is triggered you will hear an audible alarm Until conditions change i e they rise above or fall below the alarm thresholds you have set or you clear the alarm if the console is being run on AC power For two minutes if the console is running on battery power For one minute for a time alarm And you will see visible alarms e The alarm bell icon will blink on and off A message w
9. ns cD CHILL Press and hold TEMP then press HUM to display the Statistical Diagnostic Screen Press 2ND and CHILL to toggle between the Statistical and Reception Diagnostic Screens Press DONE to exit Diagnostic screens Reception Diagnostic Screen 437 Wel o ii o n Ga uy seeeeeefe HH eo Wy bas NO OARW N gt 8 bit timer value Radio frequency error of last packet Frequency correction factor Signal strength of last packet Times Phase Lock Loop did not lock Good packets Frequency index of next packet Background noise level Console battery voltage Used by Davis engineers Please see your Vantage Vue Console Manual for more information on console diagnostic screens 26 DAVIS k PTH I Davis Instruments 3465 Diablo Avenue Hayward CA 94545 2778 U S A 510 732 9229 Fax 510 732 9188 E mail info davisnet com www davisnet com Vantage Vue Console Quick Reference Guide Part Number 7395 260 Rev A 6 18 09 2009 Davis Instrument Corp All Rights Reserved Vantage Vue is a trademark of Davis Instruments Corp
10. r Crescent Moon Moon phase icons are for Northern Hemisphere Icon order is reversed in the Southern Hemisphere Icons GRAPH P ai Alarm Bell Appears when setting an alarm Blinks on and off when an alarm is triggered Graph Indicates that graph mode is currently being displayed 2ND Indicates that 2ND was pressed and all the alternate key functions printed above or below each key can be used Antenna Displays the current status of the console s reception Antenna with waves indicates signal from a station Antenna with no waves indicates resynchronization No antenna means loss of signal Arrow Indicates the current variable selected or the variable currently being graphed if in graph mode Umbrella Appears when it is currently raining Setup Mode To enter Setup Mode 1 Press and release 2ND and then press SETUP 2 Press DONE to advance or BAR to step back through setup screens TIME AND DATE Press lt and gt to move between segments Press and to change the value of the flashing segment Press 2nd and UNITS to change from 12 hour to 24 hour clock TIME ZONE Press and to cycle through time zones Press 2ND then and to set UTC offset DAYLIGHT SAVING SETTINGS Press or to choose MANUAL or AUTO DAYLIGHT SAVING STATUS If daylight savings setting AUTO displays current status If daylight savings setting MAN press or to turn DST on or off
11. re related readings inside and outside temperature wind chill heat index and dew point will read in the same unit of measure Changing one from F to C or vice versa changes all the others All RAIN and ET readings will read in the same unit of measure if ET is available for viewing Press 2ND and UNITS in Setup Mode to Change from 12 to 24 hour clock and from month day to day month Change latitude from north to south Change longitude from west to east Change elevation from feet to meters 23 SETUP Enter setup 0 CID Setup 2ND Press 2ND and SETUP to Enter Setup Mode 24 GD Cy Diagnostic Screens CHILL To Display the Console Diagnostic Screens Press and hold TEMP then press HUM to display the Statistical Diagnostic Screen Statistical Diagnostic Screen a vet 17 I oo ggl eo 15 9 ri 1c D 3 g u ta Poceoshe ST 15 REP A aa 25 SODNDARW 11 12 13 14 15 Time or number of closed anemometer reed switch Date or number of open anemometer reed switch CRC errors Firmware version Longest streak of bad packets Console resynchs Good packets Total bad packets Current streak of bad packets Current streak of good packets Station number Transmitter domain Repeater ID Total good packets received Longest streak of good packets Diagnostic o Scree
12. sor If you press 2ND and ET while listening to a Vantage Vue ISS the console will not display ET readings and you will hear an error beep Press 2ND and ET to toggle between ET Day ET Month ET Year Press 2ND and UNITS to change unit of measure There are two different units of measure for ET values 0 00 in 0 0 mm Changing the unit of measure for ET changes RAIN units as well eee eee 14 Weather Center Press WXCEN for any Weather Variable to Toggle between multiple screens of weather information for each variable displayed in the Weather Center section of the console Each variable may have one or multiple screens displayed in the Weather Center Press a variable key and then press WxCen multiple times to scroll through the available screens See the Vantage Vue Console Manual for more information on all the screens available in the Weather Center 15 Graphs GRAPH To view Graph Mode i Press a variable and then press GRAPH The graph and the minimum and maximum readings for the selected weather variable display The reading in the weather variable field corresponds to the flashing dot on the graph Press the key or key combination for any variable to view that variable in Graph Mode Press lt or gt to move right or left on the graph The selected data point flashes and the reading in the weather variable field changes The time and or date will also change as you move backward and forward
Download Pdf Manuals
Related Search