Home

Workstation User`s Manual

Contents

1. Memory Hard Disk SCSI 0 0 CD ROM 1 IDE 1 0 Floppy 1 W Ethernet 1 QUSB Controller Sound Adapter D Mouse Processors Glinux Mandrake Linux 160MB Compact Using drive dev edrom Using drive devitdo Bridged Present Using device devidsp Auto detect 1 The Workstation window Linux host 73 VMware Workstation 5 User s Manual 74 Overview of the VMware Workstation Window A VMware Workstation virtual machine is like a separate computer that runs ina window on your physical computer However VI than the screen of a physical computer From the Workstation window you can access and run your virtual machines and teams and sw This section shows you how to navigate and use and how to set up a list of favorites virtual machines and teams that you use often and want to access quickly The Home Page Summary View and Conso The Toolbar on page 79 The Favorites List on page 83 ware Workstation displays more itch easily from one to another he VMware Workstation window e View on page 76 To open the Workstation application see Launching VMware Workstation on page 72 To create a new virtual machine and install a guest operating system see Creating a New Virtual Machine on page 113 One Window or Many Your Choice In VMware Workstation 5 you can open multiple virtual machines in the same Workstation window Or you can launch multi
2. Virtual Machine Settings iE Hardware Options Device Summary Device status BWrremory 224 MB at E Hard Disk 1 IDE 0 0 Kel corns at power ori oco Rom1 IDE 1 0 Auto detect Connection Floppy 1 Using drive A O Use physical serial port nc Bridged Quse Controller Present audo Default adapter O Use output file serial Using pipe pipeco Use named pipe pipe com_1 This endis the server The other end is a vitual me 120 mode Z Yield CPU on poll Allow the guest operating system to use this serial port in polled mode ae opposed to interrupt mode To restore performance for applications on the host in the virtual machine settings editor select the virtual serial port and check the Yield CPU on poll check box This configuration option forces the affected virtual machine to yield processor time if the only task it is trying to do is poll the virtual serial port 405 VMware Workstation 5 User s Manual 406 Changing the Input Speed of the Serial Connection To use the second option power off the virtual machine and close the VMware Workstation window then use a text editor to add the following line to your virtual machine s configuration file serial lt n gt pipe charTimePercent lt x gt This option is useful if you want to squeeze every possible bit of speed from your serial connection over a pipe to the virtual machine In principle there is no limit on the output speed the s
3. e The guest operating system e The virtual machine name and the location of the virtual machine s files e The network connection type e Whether to allocate all the space for a virtual disk at the time you create it e Whether to split a virtual disk into 2GB files If you select Custom you also can specify how to set up your disk create a new virtual disk use an existing virtual disk or use a physical disk and specify the settings needed for the type of disk you select There is also an option to create a legacy virtual disk for use in environments with other VMware products Select Custom if you want to e Make a legacy virtual machine that is compatible with Workstation 4 x GSX Server 3 x ESX Server 2 x and VMware ACE 1 x e Store your virtual disk s files in a particular location e Use an IDE virtual disk for a guest operating system that would otherwise have a SCSI virtual disk created by default e Use a physical disk rather than a virtual disk for expert users e Set memory options that are different from the defaults e Assign more than one virtual processor to the virtual machine www vmware com 116 CHAPTER 5 Creating a New Virtual Machine 6 Ifyou selected Typical as your configuration path skip to step 7 If you selected Custom as your configuration path you may create a virtual machine that fully supports all Workstation 5 features or a legacy virtual machine compatible with specific VMware pro
4. 1 If it is not already running Start gt Programs gt VMw launch VMware Workstation are gt VMware Workstation Open the virtual machine in which you want to use the generic SCSI device Make sure the virtual machine is powered off From the VMware Workstation window choose VM gt Settings The virtual machine settings editor opens Click Add to start the Add Hardware Wizard Click Next Select Generic SCSI Device then click Next 423 VMware Workstation 5 User s Manual 424 6 Choose the name of the physical device you want to use Then choose the virtual device node where you want this device to appear in the virtual machine A check box under Device status allows you to specify whether the device should be connected each time the virtual machine is powered on 7 Click Finish to install the new device 8 Click OK to save the configuration and close the virtual machine settings editor To remove this device launch the virtual machine settings editor select the generic SCSI device then click Remove Adding a Generic SCSI Device Not Detected by Workstation Advanced Users When you want to add a generic SCSI device to a virtual machine if Workstation does not display the device you want to add for example scanners on a Windows 2000 host or some tape backup devices you need to add the device manually to the virtual machine s configuration file vmx Reasons Workstation cannot detect a d
5. Each virtual machine should have its own folder All associated files such as the configuration file and the disk file are placed in this folder Windows hosts On Windows 2000 Windows XP and Windows Server 2003 the default folder for this Windows XP Professional virtual machine is C Documents and Settings lt username gt My Documents My Virtual Machines Windows XP Professional On Windows NT the default folderis C WINNT Profiles lt username gt Personal My Virtual Machines Windows XP Professional Linux hosts The default location for this Windows XP Professional virtual machine is lt homedir gt vmware winXPPro where lt homedir gt is the home directory of the user who is currently logged on Virtual machine performance may be slower if your virtual hard disk is on a network drive For best performance be sure the virtual machine s folder is on a www vmware com CHAPTER 5 Creating a New Virtual Machine local drive However if other users need to access this virtual machine you should consider placing the virtual machine files in a location that is accessible to them For more information see Sharing Virtual Machines with Other Users on page 203 9 Specify the number of processors for the virtual machine The setting Two is supported only for host machines with at least two logical processors Note The following are all considered to have two logical processors e Asingle processor host with hyperthread
6. Resuming a Team To resume a team of virtual machines 1 Select the team to resume select the team from the Favorites list or click the summary tab for the team 2 Click the Power On button on the toolbar A progress indicator appears The time to complete the operation varies with the size of the virtual machines The startup sequence determines the order in which virtual machines are suspended and resumed and the time Workstation delays after each team member is resumed before resuming the next team member See Changing the Start Up Sequence for a Team on page 320 Note If you attempt to close VMware Workstation while the team suspend resume operation is still in progress a warning dialog appears Power Operations for Individual Members of a Team To perform power operations for a single virtual machine in a team 1 Select the virtual machine from the teams console 2 Choose the appropriate command from the VM gt Power menu e Power On see Starting a Virtual Machine on page 159 for a description This command starts the active virtual machine just as a power switch starts a physical PC e Power Off see Shutting Down a Virtual Machine on page 162 for a description This command turns off the active virtual machine just as a power switch turns off a physical PC 311 VMware Workstation 5 User s Manual 312 Caution If a virtual machine is writing to disk when it receives a Power Off command da
7. go vmware toolbox amp Note You may run VMware Tools as root or as a normal user To shrink virtual disks you must run VMware Tools as root su Note In a FreeBSD 4 5 guest operating system sometimes VMware Tools does not start after you install VMware Tools reboot the guest operating system or start VMware Tools on the command line in the guest An error message appears Shared object libc so 3 not found The required library was not installed This does not happen with full installations of FreeBSD 4 5 but does occur for minimal installations To fix the problem of the missing library take the following steps 1 Insert and mount the FreeBSD 4 5 installation CD or access the ISO image file 2 Change directories and run the installation script cd cdrom compat3x install sh Installing VMware Tools in a NetWare Virtual Machine 1 Power on the virtual machine 2 Select VM gt Install VMware Tools The remaining steps take place inside the virtual machine 3 Load the CD ROM driver so the CD ROM device mounts the ISO image as a volume Do one of the following e Inthe system console for a NetWare 6 5 virtual machine type LOAD CDDVD e Inthe system console for a NetWare 6 0 or NetWare 5 1 virtual machine type LOAD CD9660 NSS 4 When the driver finishes loading you can begin installing VMware Tools In the system console type vmwtools setup ncf 147 VMware Workstation 5 User s Manual
8. When the installation finishes the message VMware Tools for NetWare are now running appears in the Logger Screen NetWare 6 5 and NetWare 6 0 guests or the Console Screen NetWare 5 1 guests 5 Restart the guest operating system In the system console type restart server After you install VMware Tools make sure the VMware Tools virtual CD ROM image netware iso is not attached to the virtual machine If it is disconnect it Right click the CD ROM icon in the status bar of the console window and select Disconnect www vmware com 148 CHAPTER 5 Creating a New Virtual Machine VMware Tools Configuration Options This section discusses VMware Tools configuration options in the following topics e Using the Control Panel to Configure VMware Tools on page 149 e Using the System Console to Configure VMware Tools in a NetWare Guest Operating System on page 153 Using the Control Panel to Configure VMware Tools This section shows the options available in a Windows XP guest operating system Similar configuration options are available in VMware Tools for other guest operating systems When VMware Tools is running an icon with the VMware boxes logo appears in the guest operating system s system tray To open the VMware Tools control panel double click the VMware Tools icon in the system tray If the VMware Tools icon does not appear in the system tray go to Start gt Control Panel Locate the VMware Tools icon and double cli
9. msg autoAnswer TRUE www vmware com CHAPTER 4 Learning VMware Workstation Basics Keyboard Shortcuts If you prefer to work from the keyboard as much as possible you may find the following keyboard shortcuts handy If you have changed the Preferences setting for the hot key combination substitute your new setting for Ctrl Alt as needed in the shortcuts listed here Shortcut Action Ctrl B Power on Ctrl E Power off Ctrl R Reset the power Ctrl Z Suspend Ctrl N Create a new virtual machine Ctrl O Open a virtual machine Ctrl F4 Close the summary console view for the selected virtual machine A confirmation dialog appears only if the virtual machine is powered on Ctrl D Edit the virtual machine s configuration Ctrl G Grab input from keyboard and mouse Ctrl P Edit preferences Ctrl Alt Enter Go to full screen mode Ctrl Alt Return to normal windowed mode Ctrl Alt Tab Switch among open virtual machines while mouse and keyboard input are grabbed Ctrl Tab Switch among open virtual machines while mouse and keyboard input are not grabbed VMware Workstation must be the active application Ctrl Shift Tab Switch among open virtual machines while mouse and keyboard input are not grabbed VMware Workstation must be the active application 107 VMware Workstation 5 User s Manual 108 What Files Make Up a Virtual Machine You may neve
10. A VMware Workstation virtual machine can use up to four virtual serial ports The virtual serial ports can be configured in several ways e Youcan connect a virtual serial port to a physical serial port on the host computer e You can connect a virtual serial port to a file on the host computer e You can make a direct connection between two virtual machines or between a virtual machine and an application running on the host computer You can also select whether to connect the virtual serial port when you power on the virtual machine Using a Serial Port on the Host Computer You can set up the virtual serial port in a virtual machine to use a physical serial port on the host computer This is useful for example if you want to use an external modem or a hand held device in your virtual machine To install a virtual serial port that connects to a physical serial port on the host computer take the following steps 1 Open the virtual machine settings editor VM gt Settings 2 Click Add to start the Add Hardware Wizard 3 Select Serial Port then click Next Add Hardware Wizard amp Serial Port Type What media should this vitual serial port access Serial port Use physical serial port on the host O Output to fle Output to named pipe 397 VMware Workstation 5 User s Manual 4 Select Use physical serial port on the host then click Next 6 7 Select a Physical Serial Port Which physical drive shou
11. Bad Yams T Hep GoTo x Close The snapshot manager Windows host left and Linux host right Selecting a Snapshot In the snapshot manager select a snapshot by clicking it To select more than one snapshot hold down the Ctrl key while clicking snapshots one by one Double clicking a snapshot is the same as selecting that snapshot and clicking Go To Snapshot Going to a Snapshot Use the Go To button to restore the virtual machine to the currently selected snapshot 1 Choose VM gt Snapshot gt Snapshot Manager 2 Select the desired snapshot 3 Click Go to 4 Click Yes in the confirmation dialog box Making a Clone from a Snapshot In the snapshot manager you can clone a virtual machine from any snapshot taken while the virtual machine is powered off See Making a Clone from a Snapshot on page 286 www vmware com CHAPTER 9 Preserving the State of a Virtual Machine Deleting Snapshots Use the Delete button to permanently remove snapshots from Workstation 1 Choose VM gt Snapshot gt Snapshot Manager 2 Select one or more snapshots 3 Click Delete 4 Click OK in the confirmation dialog box Editing Snapshot Name and Description You can edit the name and description of a snapshot by typing in the appropriate field 1 Choose VM gt Snapshot gt Snapshot Manager 2 Select the desired snapshot 3 Click within the Name or Description field to change that fi
12. FF Vitware Virtual Machine Importer Select the Appropriate Configuration How would you prefer to import this vitual machine Creates a new virtual machine compatible with the VMware virtual machine software installed on your computer The Importer makes a copy of the disks in your source virtual machine or image Choose this option if you want to create a virtual machine for a specific version of VMware Workstation or GSX Server or if you want to link directly to the hard disks of the source virtual machine or image Typical This configuration is appropriate for most use Custom Custom configurations are useful if CHAPTER 5 Creating a New Virtual Machine If you are importing a Virtual PC virtual machine make sure the virtual machine is powered off Choose File gt Import to launch the VMware Virtual Machine Importer Wizard From the opening panel click Next e You run Workstation 5 but you need to create a legacy virtual machine for use with VMware Workstation 4 GSX 3 x ESX 2 x or VMware ACE1 x e You run Workstation 5 and you prefer not to make a copy of the virtual disks of the source virtual machine or system image You might make this choice to save disk space The migrated VMware virtual machine uses the virtual disks of the source virtual machine or system image 129 VMware Workstation 5 User s Manual 130 Browse or type the path to the source virtual machine or system image Click Ne
13. Network Virtual Machines panel Linux host Select a network connection for each virtual machine Ethernet adapter Each virtual machine can have one network connection per virtual Ethernet adapter e Ifyou are running Workstation on a Linux host you can add and remove virtual Ethernet adapters using the Add Adapter and Remove Adapter buttons e Ifyou are running Workstation on a Windows host you can add or remove virtual Ethernet adapters later See Network Adapter on page 313 e You can change connections later See Connecting to or Changing a LAN Segment on page 314 9 Click Finish to exit the New Team Wizard 304 www vmware com Opening a Team To open a team in VMware Workstation 1 Choose File gt Open 2 Browse to the location of the vmtm file for the desired team 3 Select the file and click Open The selected team appears as a tabbed item in the summary window To add the team to the Favorites list see Adding an Item to the Favorites List on page 84 Closing a Team Closing a team removes its summary window The team and virtual machine members can no longer be seen in VMware Workstation but you can open the team from the File menu The team and virtual machine files remain on the host file system To delete a team permanently see Deleting a Team on page 306 To close a team 1 Make sure the team is powered off 2 Select the team to close Click the summary console tab for the desired team or se
14. VMware Workstation 5 User s Manual 186 www vmware com CHAPTER Moving and Sharing Virtual Machines The following sections provide information on how to move your virtual machines from one host to another or elsewhere on the same host plus recommendations on how to share virtual machines with other users e Virtual Machine Identifier UUID on page 188 e Moving a VMware Workstation 5 Virtual Machine on page 191 e Moving a VMware Workstation 4 Virtual Machine on page 195 e Moving an Older Virtual Machine on page 198 e Sharing Virtual Machines with Other Users on page 203 e Moving Linked Clones on page 204 e Sharing Virtual Machines with VMware Player on page 205 Note When you move a virtual machine to a new host computer or to a different directory on the same host computer or when you rename a directory in the path to the virtual machine s configuration file VMware Workstation generates a different MAC address for the virtual Ethernet adapter For additional information see Maintaining and Changing the MAC Address of a Virtual Machine on page 352 187 VMware Workstation 5 User s Manual Virtual Machine Identifier UUID To ensure all virtual machines are identified properly each virtual machine is automatically assigned a universal unique identifier UUID If you move or copy a virtual machine Workstation offers the choice of creating a new UUID the first time you power on the vir
15. VMware Workstation 5 User s Manual 388 Helping VMware with Experimental Support VMware offers only experimental support for Direct3D acceleration VMware may not respond personally to all support requests regarding Direct3D acceleration VMware is interested in e Catastrophic failures such as bluescreening the guest or 3 D applications that crash VMware Workstation e Testing reports about ATI 8500 and later video cards whether or not they work e Testing reports about Linux host operating systems whether or not they work e Testing reports about specific DirectX8 and DX9 applications you are using whether or not they work e Specific problems you are having when running 3 D e Specific directions you want to see VMware 3 D technology evolve Specific and detailed reports can help speed this feature from experimental support to full functionality Please include as many details about your configuration 3 D applications and hardware as you can www vmware com CHAPTER 13 Configuring Video and Sound Configuring Sound VMware Workstation provides a sound device compatible with the Sound Blaster AudioPCl and supports sound in Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows Server 2003 and Linux guest operating systems The VMware Workstation sound device is enabled by default Sound support includes PCM pulse code modulation output and input For example you can play wav
16. Z Connect at power on aco rom ave 1 0 Network connection Bridged Connected directly to the physical network ONAT Used to share the host s IP address O Host oniy A private network shared with the host O Custom Specific virtual network To add a new virtual Ethernet adapter follow these steps 1 Be sure the virtual machine to which you want to add the adapter is powered off Open the virtual machine settings editor VM gt Settings Click Add The Add Hardware Wizard starts Select Network Adapter Click Next Select the network type you want to use Bridged NAT Host only or Custom OY a Be Wh If you select Custom choose the VMnet network you want to use from the drop down list Note Although VMnet0 VMnet1 and VMnet8 are available in this list they are normally used for bridged host only and NAT configurations respectively Special steps are required to make them available for use in custom configurations You should choose one of the other switches 7 Click Finish The new adapter is added 8 Click OK to save your configuration and close the virtual machine settings editor www vmware com CHAPTER 12 Configuring a Virtual Network To change the configuration of an existing virtual network adapter follow these steps 1 2 3 4 wn Open the virtual machine settings editor VM gt Settings Select the adapter you want to modify Select the network type you
17. gt 0x034 0x035 Shift right 0x036 numeric pad 0x037 Alt left 0x038 Space bar 0x039 Caps Lock 0x03a F1 0x03b F2 0x03c 414 www vmware com Symbol Shifted symbol Location V scan code F3 0x03d F4 0x03e F5 0x03f F6 0x040 F7 0x041 F8 0x042 F9 0x043 F10 0x044 um Lock numeric pad 0x045 Scroll Lock 0x046 Home 7 numeric pad 0x047 Up arrow 8 numeric pad 0x048 PgUp 9 numeric pad 0x049 numeric pad 0x04a Left arrow 4 numeric pad 0x04b 5 numeric pad 0x04c Right arrow 6 numeric pad 0x04d numeric pad 0x04e End 1 numeric pad 0x04f Down arrow 2 numeric pad 0x050 PgDn 3 numeric pad 0x051 ns 0 numeric pad 0x052 Del numeric pad 0x053 F11 0x057 F12 0x058 Break Pause 0x100 Enter numeric pad 0x11c Ctrl right 0x11d I numeric pad 0x135 SysRq Print Scrn 0x137 Alt right 0x138 CHAPTER 14 Connecting Devices 415 VMware Workstation 5 User s Manual 416 Symbol Shifted symbol Location V scan code Home function pad 0x147 Up arrow unction pad 0x148 Page Up unction pad 0x149 Left arrow function pad 0x14b Right arrow unction pad 0x14d End unction pad 0x14f Down arrow unction pad 0x150 Page Down unction pad 0x151 nsert unction pad 0x152 Delete unction pad 0x153 Wi
18. 6 Install the VMware Workstation software as described in Installing Workstation on a Windows Host on page 48 Start VMware Workstation and enter your serial number You need to do this only once during the installation process when prompted or through Help gt Enter Serial Number If you don t already have a serial number from a previous installation the installer prompts you for the serial number during installation If you choose not to enter the serial number during installation you can enter it later by going to Help gt Enter Serial Number Create a virtual machine using the New Virtual Machine Wizard See Creating a New Virtual Machine on page 113 nstall a guest operating system in the new virtual machine You need the nstallation media CD ROM or floppy disks for your guest operating system See Installing a Guest Operating System and VMware Tools on page 137 Install the VMware Tools package in your virtual machine for enhanced performance See Installing VMware Tools on page 140 Start using your virtual machine Before you begin be sure you have A computer and host operating system that meet the system requirements for running VMware Workstation See Host System Requirements on page 30 The VMware Workstation installation software If you bought the packaged distribution of VMware Workstation the installation software is on the CD in your package If you bought the electronic distribution the insta
19. GSX Server ESX Server Vitual SMP VMotion and VMware ACE are trademarks of VMware Inc Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation The VMware Tools Service is running Cancel pl Help The About tab displays version and copyright information In Windows guests this tab also shows the status of the VMware Tools Service 152 www vmware com CHAPTER 5 Creating a New Virtual Machine Using the System Console to Configure VMware Tools ina NetWare Guest Operating System You can configure certain virtual machine options such as time synchronization CPU idling and device configuration with VMware Tools in a NetWare virtual machine using the system console The VMware Tools command line program is called vmwtool To see the options associated with this command at the system console type vmwtool help Summary of VMware Tools Commands for a NetWare Guest Each command in the following table must be entered into the system console after the VMware Tools command vmwt ool Use the following format vmwtool lt command gt vmwtool Command Definition help Displays a summary of VMware Tools commands and options in a NetWare guest partitonlist Displays a list of all disk partitions in the virtual disk and whether or not a partition can be shrunk shrink lt partition gt Shrinks the listed partitions If no partitions are specified then all partitions in the virtual
20. See Configuring Teams on page 299 21 VMware Workstation 5 User s Manual 22 Clones Clones simplify the process of copying a virtual machine Clones facilitate collaborative testing and debugging and let colleagues share virtual machines more easily You can duplicate a virtual machine as a linked clone or a full clone Linked clones make it easy to set up a library of baseline virtual machines on a shared drive to be accessed and shared by you and others without using unnecessary disk space on local machines e A full clone a complete copy is also available when you need an identical virtual machine without the need to locate files within the host file system or to tediously install everything required to duplicate an existing guest configuration See Cloning a Virtual Machine on page 289 VMware Player New in v5 5 VMware Player is an application that opens and plays virtual machines created with VMware Workstation 4 and Workstation 5 GSX Server and ESX Server On Windows hosts the player also opens and plays Microsoft Virtual PC and Virtual Server virtual machines and Symantec LiveState Recovery system images VMware Player makes your VMware virtual machines accessible to colleagues partners customers and clients who do not own VMware products VMware Player is included with Workstation version 5 5 VMware Player gives software developers and vendors great flexibility in marketing and distributing p
21. See also Display support in virtual machine 34 380 Graphics card 134 Guest autofit 170 defined 20 fit 170 Guest operating system defined 472 installing 137 www vmware com installing on physical disk 263 support for 64 bit 37 supported 37 supported FreeBSD 32 bit 40 supported FreeBSD 64 bit 40 supported Linux 32 bit 39 supported Linux 64 bit 39 supported MS DOS 38 supported Solaris 32 bit 40 supported Solaris 64 bit 40 supported Windows 32 bit 38 supported Windows 64 bit 38 H Hardware profiles 247 Help configuring Web browser for on Linux host 58 Host defined 20 virtual adapter enabling disabling adding and removing 343 Host computer 473 system requirements 30 Host operating system 473 Host virtual adapter adding 343 defined 328 disabling 343 enabling 343 removing 343 Host virtual network mapping 340 Host only networking basic configuration 332 defined 472 selecting IP addresses 347 Hot key for full screen switch mode 464 465 Hot keys 89 for full screen switch mode 464 l ICMP 367 IDE drives in virtual machine 34 Image file floppy 35 229 ISO 35 226 229 Importer see Virtual Machine Importer importing a virtual machine or system image 129 Independent disk 216 279 Input capturing from keyboard and mouse 89 Install guest operating system 137 on Linux host 54 on Windows host 47 software in a virtual machine 174 VMware Tools 140 VMware Workstation 45 Intel EM64T 24 30 Xeon 30 Int
22. Shrink About Your shared folders are at host Shated Folders You can map a dive letter to this path using Windows Explorer gt Tools gt Map Network ive You can also access your shared folders from Windows Explorer under My Network Places See the user s manual for more details Cancel a Help The Shared Folders tab provides information on where to find your shared folders For more information on shared folders see Using Shared Folders on page 176 The Shrink Tab VMware Tools Properties x Options Devices Scripts Shared Folders Shiink About f Unsupported partitions Select the partitions you wish to prepare for shrinking Mount Point Mics Prepare to shrink Cancel i Help Shrink disk enabled supported partitions The Shrink tab gives you access to controls that reclaim unused space in a virtual disk However some configurations do not allow you to shrink a virtual disk For more information see Shrinking Virtual Disks on page 215 The About Tab VMware Tools Properties Options Devices Scripts Shared Folders Shrink A VMware Tools for Windows Build build 12749 Copyright C 1998 2005 VMware Inc AN rights reserved Protected by one or more U S Patent Nos 6 397 242 6 436 847 6 704 925 6 711 672 6 725 289 6 735 601 6 785 986 6 789 156 and 6 795 966 patents pending VMware is a registered trademark and the VMware boxes logo
23. These four interfaces should have different IP address on separate subnets Setting Up the Virtual Machines Now you have two host only network adapters on the host computer Each is connected to its own virtual switch VMnet1 and VMnet2 You are ready to create and configure your virtual machines and connect them to the appropriate virtual switches Virtual Machine 1 Connected to the Default Host only Interface 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine Launch VMware Workstation and open the virtual machine Edit the configuration using the virtual machine settings editor VM gt Settings Select Network Adapter and select Host only VMnet1 from the drop down ist on the right f no network adapter is shown in the list of devices click Add then use the Add Hardware Wizard to add an adapter 361 VMware Workstation 5 User s Manual Virtual Machine 2 Connected to the Newly Created Host Only Interface 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine 2 Launch VMware Workstation and open the virtual machine 3 Edit the configuration using the virtual machine settings editor VM gt Settings Select Network Adapter and choose Custom VMnetz2 from the drop down list on the right If no network adapter is shown in the list of devices click Add then use the Add Hardware Wizard to add an adapter If
24. This section discusses the following topics e Using NAT on page 366 e The Host Computer and the NAT Network on page 366 e DHCP on the NAT Network on page 366 e DNS on the NAT Network on page 367 e External Access from the NAT Network on page 367 e Advanced NAT Configuration on page 368 e Custom NAT and DHCP Configuration on a Windows Host on page 372 e Considerations for Using NAT on page 373 e Using NAT with NetLogon on page 373 e Sample Linux vmnetnat conf File on page 375 365 VMware Workstation 5 User s Manual 366 Using NAT he NAT device is connected to the VMnet8 virtual switch Virtual machines connected to the NAT network also use the VMnet8 virtual switch The NAT device waits for packets coming from virtual machines on the VMnet8 virtual network When a packet arrives the NAT device translates the address of the virtual machine to that of the host before forwarding the packet to the external network When data arrives from the external network for the virtual machine on the private network the NAT device receives the data replaces the network address with that of the virtual machine and forwards the data to the virtual machine on the virtual network This translation occurs automatically and requires minimal configuration on the guest and the host The Host Computer and the NAT Network The host computer has a host virtual adapter on the NAT network identical to the host virtual adapter on the host
25. button to send a shut down signal to the guest operating system An operating system that recognizes this signal shuts down gracefully Note Not all guest operating systems respond to a shut down signal from this button If your operating system does not respond to a shut down signal shut down from within the operating system as you would with a physical machine e i The suspend button is not configurable e p The power on or resume button is not configurable e amp You can configure this button to reset a virtual machine or restart a guest operating system Select Reset if you want this button to work as a reset switch The virtual machine is abruptly reset with no consideration for work in progress Select Restart Guest if you want this button to send a restart signal to the guest operating system An operating system that recognizes this signal shuts down gracefully and restarts Note Not all guest operating systems respond to a restart signal from this button If your operating system does not respond to a restart signal restart from within the operating system as you would with a physical machine Run VMware Tools Scripts This option allows you to run scripts when you power ona virtual machine See Command Line Reference on page 102 for help with scripting 97 VMware Workstation 5 User s Manual Shared Folders Virtual Machine Settings Hardware Options Settings Summary E General Windows XP Pro SP2
26. device allows you to connect your virtual machines to an external network when you have only one IP network address on the physical network and that address is used by the host computer You can for example use NAT to connect your virtual machines to the Internet through a dial up connection on the host computer through the host computer s Ethernet adapter or through a wireless Ethernet adapter NAT is also useful when you need to connect to a non Ethernet network such as Token Ring or ATM The NAT device is set up automatically when you install VMware Workstation On a Linux host you must choose to make NAT available to your virtual machines DHCP Server The DHCP dynamic host configuration protocol server provides IP network addresses to virtual machines in configurations that are not bridged to an external network for example host only and NAT configurations Network Adapter One virtual network adapter is set up for your virtual machine when you create it with the New Virtual Machine Wizard using any type of networking It appears to the guest operating system as an AMD PCNET PCI adapter You can create and configure up to three virtual network adapters in each virtual machine using the virtual machine settings editor www vmware com CHAPTER 12 Configuring a Virtual Network Common Networking Configurations The following sections illustrate the networking configurations that are set up for you automatical
27. eg minutes NBNS retries 2 S minutes NBDS timeout 2 minutes cE lt Change any NAT settings you wish Click the appropriate button to set up or change port forwarding or to specify DNS servers the virtual NAT device should use Linux Host Use the NAT configuration file on the host to configure the NAT device This file is etc vmware vmnet8 nat nat conf The configuration file is divided into sections Each section configures a part of the NAT device Text surrounded by square brackets such as host marks the beginning of a section In each section is a configuration parameter that can be set The configuration parameters take the form ip 192 168 27 1 24 For an example of a NAT configuration file see Sample Linux vmnetnat conf File on page 375 The configuration file variables are described below The host Section ip The IP address that the NAT device should use It can optionally be followed by a slash and the number of bits in the subnet netmask The subnet mask to use for the NAT network DHCP addresses are allocated from this range of addresses configport A port that can be used to access status information about the NAT device device The VMnet device to use Windows devices are of the form VMnet lt x gt where lt x gt is the number of the VMnet Linux devices are of the form dev vmnet lt x gt 369 VMware Workstation 5 User s Manual 370 activeFTP Flag to indicate if act
28. gt Open 2 In the File name field enter the name of the configuration vmx vmc or v2 i file for the virtual machine or system image to convert You can use the field Files of type to filter the files displayed by file extension so you can browse to the configuration file 3 Click Open Workstation automatically creates a VMware virtual machine with a VMware configuration file vmx for the converted virtual machine or system image The converted virtual machine links to the virtual disks of the original virtual machine or system image The original Virtual PC or LiveState Recovery configuration vme or sv21 file is unchanged www vmware com Converting a Virtual Machine or System Image Using the Import Command To convert a virtual machine or system image using the Import command 1 2 3 Select the configuration and click Next Note You cannot import a virtual machine while it is operating SF VMware Virtual Machine Importer Welcome to the VMware Virtual Machine Importer This wizard guides you through the steps of importing a virtual machine or system image for use with VMware Workstation You can import a virtual machine created with Microsoft Virtual PC or Virtual Server or an image created by Symantec LiveState Recovery The wizard makes a copy of your vittual machine or image and prepares it for use with VMware Workstation Your existing virtual machine or image is not changed
29. machine using the full installation CD Before installing the operating system be sure that you have already created a new virtual machine and configured it using the New Virtual Machine Wizard See Setting Up a New Virtual Machine on page 114 Note To use SCSI disks in a Windows XP virtual machine you need a special SCSI driver available from the download section of the VMware Web site Follow the instructions on the Web site to use the driver with a fresh installation of Windows XP Installation Steps 1 Insert the Windows XP CD in the CD ROM drive If you prefer you can connect to an ISO image of an installation disk See Connecting a CD ROM or Floppy Drive to an Image File on page 229 Note If you plan to use a PXE server to install the guest operating system over a network connection you do not need the operating system installation media When you power on the virtual machine in the next step the virtual machine detects the PXE server ISI WinXPPro7 VMware Workstation File Edt View VM Team Windows Help windows i px cfg Ail EB Longhorn experiments d cfg BA1L E Windows 2000 Professional 3 Windows XP Home Edition c d px a i Windows xP Professional Gi Windows xP Pro SP1 Ei Windows xP Pro SP2 s not D linux E nesas g a eric Multi RHELS W59 t Automatic Boot ooting on the Corporate Network going to b a to you Jent Server tier Private Network e Gi vm0o1170a 3 i C itude D488 D688 G
30. machines on the same network at the same time You can resolve the duplicate ID problem by using additional tools such as the Windows 2000 System Preparation Tool Sysprep For example if you use Virtual Machine Importer to test the viability of running a Virtual PC virtual machine as a VMware virtual machine without first decommissioning the original Virtual PC machine you need to resolve the duplicate ID problem Refer to Changes to Virtual Hardware on page 134 for a discussion of possible migration issues Opening and Importing a Virtual Machine or System Image Workstation provides two ways to convert a virtual machine or system image e Use the File gt Open command to convert and open a virtual machine or system image quickly Workstation uses default settings to make the conversion automatically with no input required from you Use the File gt Import command to specify a number of options for the converted virtual machine the converted virtual machine s location whether or not the converted virtual machine shares virtual disks with the original virtual machine or system image and whether the converted virtual machine is to be compatible with Workstation 5 or a legacy virtual machine that is compatible with Workstation 4 ESX 2 x GSX Server 3 x or VMware ACE 1 x Converting a Virtual Machine or System Image Using the Open Command To convert a virtual machine or system image using the Open command 1 Choose File
31. take a new snapshot and make a clone from a snapshot For more on the snapshot manager see The Snapshot Manager Window on page 282 Full Screen This button enlarges the virtual machine display to cover the entire host monitor The virtual machine no longer appears in a window Note Workstation menus and toolbar are not visible in full screen mode Press Ctrl Alt to restore the Workstation window Note Ifyou are unable to enter fullscreen mode when the guest s display mode is smaller than the host s display mode try adding the following line to the virtual machine s configuration vmx file mks maxRefreshRate 1000 See What Files Make Up a Virtual Machine for a description of this file Quick Switch This button enlarges the Workstation console to cover the entire host monitor Console tabs are visible allowing you to switch between your virtual machines and teams with a single click Note Workstation menus and toolbar are not visible in quick switch mode Move your cursor to the top of the screen to show the menu and toolbar momentarily 80 www vmware com CHAPTER 4 Learning VMware Workstation Basics Summary This button displays the summary view See Displaying the Summary View on page 76 for a description of this view Console This button displays the console view See Displaying the Console View on page 78 for a description of this view Customizing the Toolbar You can customize the Workstation
32. then browse to the virtual machine s configuration vmx file See What Files Make Up a Virtual Machine on page 108 for a description of the files that you are moving www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Moving a VMware Workstation 4 Virtual Machine Note This section discusses virtual machines created with Workstation 4 However the discussion applies equally to virtual machines created with all these VMware products e Workstation 4 x e GSX Server 3 x e ESX Server 2 x e VMware ACE 1 x See Legacy Virtual Disks on from older VMware produc page 268 for more information on virtual machine formats ts If you want to move a virtual machine created with Workstation 4 you may prefer to upgrade it for full compatib power on the virtual machi lity with VMware Workstation 5 before moving it To do so ne under VMware Workstation 5 and choose VM gt Upgrade Virtual Machine You can then follow the instructions in Moving a VMware Workstation 5 Virtual Machine on page 191 If you upgrade the virtual machine you can no longer run it under VMware Workstation 4 If you need to run the virtual machine under both VMware Workstation 4 and VMware Workstation 5 do not upgrade the virtual machine Follow the instructions in this section These instructions assume that you are using a virtual disk stored in a set of vmdk files on your host computer Caution It s always safest
33. 2000 host use Disk Management Start gt Settings gt Control Panel gt Administrative Tools gt Computer Management gt Storage gt Disk Management Select the partition you want to unmap then from the Action menu select All Tasks gt Change Drive Letter and Path Click the Remove button Use the virtual machine settings editor VM gt Settings if you want to change any configuration options from the wizard defaults for example to change the amount of memory allocated to the guest operating system If you have multiple IDE drives configured on a system the VMware BIOS normally attempts to boot them in this sequence a Primary master b Primary slave c Secondary master d Secondary slave If you have multiple SCSI drives configured on a system the VMware BIOS normally attempts to boot them in the order of the SCSI device number If you have both SCSI and IDE drives configured the VMware BIOS normally attempts to boot SCSI drives followed by IDE drives in the order described above The boot sequence can be changed in the Boot menu of the virtual machine s Phoenix BIOS After powering on the virtual machine press F2 during the BIOS boot in the virtual machine to enter the BIOS setup menu 243 VMware Workstation 5 User s Manual 244 8 Power on the virtual machine Click the Power On button The virtual machine 10 starts runs the Phoenix BIOS then boots from the master boot record MBR Choose
34. 380 Screen modes full screen 168 quick switch 169 Screen resolution 172 Screenshot capture 183 capturing 183 Scripts enabling disabling and running 151 Scripts tab tools 151 SCSI adding a generic SCSI device 423 428 485 adding a generic SCSI device not detected by Workstation 424 and dual boot configurations 257 avoiding concurrent access on a Linux host 427 connecting to generic SCSI device 422 devices in virtual machine 35 disk geometry 260 driver for Windows NT guest 423 driver for Windows Server 2003 guest 258 422 driver for Windows XP guest 258 422 drivers 121 257 261 422 427 generic SCSI on a Linux host 426 generic SCSI on a Windows host 422 permissions for a generic SCSI device on a Linux host 427 Sempron 24 30 Sempron processor supported for 64 bit guest 37 Serial connection between host application and vir tual machine 400 between two virtual machines 402 to a serial port on the host 397 Serial number 47 54 115 Serial port installing and using 397 Server DHCP 328 335 341 348 355 366 373 DNS 356 366 367 369 WINS 368 Settings 94 Settings editor virtual machine 182 475 Share drag and drop 472 files on a Linux host with Samba 378 Shared folder adding on a Linux host 179 adding on a Windows host 177 and Linux symbolic link 180 and Windows shortcut 180 defined 474 enable and disable 178 enabling and disabling 179 linux 180 settings not migrated by importer 13
35. 5 5 you no onger need the separate VMware Virtual Machine Importer application to convert a icrosoft Virtual PC virtual machine or Symantec LiveState Recovery system image to a VMware virtual machine you can now open and convert virtual machines and system images directly from Workstation See Importing Virtual Machines and System mages from Other Formats on page 125 Virtual Machine Importer Imports LiveState Recovery System Images New in v5 5 In Workstation release version 5 5 the importer is enhanced with the ability to create VMware virtual machines from system images created with Symantec LiveState Recovery See Importing Virtual Machines and System Images from Other Formats on page 125 www vmware com CHAPTER 1 Introduction and System Requirements Toolbar Customization New in v5 5 On Windows hosts you can now customize Workstation toolbars by adding removing and rearranging toolbar buttons See Customizing the Toolbar on page 81 Disable Memory Page Trimming in the User Interface New in v5 5 To improve performance you can now disable memory page trimming from the user interface in VM gt Settings gt Options gt Advanced See Advanced on page 100 Support on Linux Hosts for Wireless Ethernet Adapters Used in Bridged Networking New in v5 5 Workstation 5 5 adds support on Linux hosts for wireless Ethernet adapters used in bridged networking Support for wireless Ethernet adapters is already present
36. A DHCP server is not automatically provided for a virtual LAN segment You must provide a DHCP server on the LAN segment or reconfigure the virtual machine to use a static IP address See Configuring a Virtual Network on page 325 313 VMware Workstation 5 User s Manual Creating a Team LAN Segment To create a virtual network for a team 1 Choose Team gt Add gt LAN Segment 2 Enter a name for the private network The LAN segment is added to the team Connecting to or Changing a LAN Segment To connect a virtual machine to a LAN segment 1 Choose Team gt Settings The team settings editor opens to the Connections tab Each virtual Ethernet adapter is displayed in a separate row Team Settings Connections Virtual Machines LAN Segments Options virtual Machine Adapter Data Clent Bridged Bo m w im o o B cient 001 amp cient 002 2 For each virtual Ethernet adapter select a LAN segment Check one box on each row to set the type of network connection for that virtual Ethernet adapter 3 Click OK The virtual machine is now connected to the selected LAN segment 31 4 www ymware com Renaming aLA To rename an existin N Segment g LAN segment 1 Choose Team gt Settings 2 Click LAN Segments Team Settings Connections Virtual Machines LAN Segments Options LAN Segment Summary Settings client 56 Kbps 0 3 loss Name clien
37. Are Here position www vmware com 98 CHAPTER 4 Learning VMware Workstation Basics in the Snapshot Manager window so the virtual machine always starts in the state it was in when the parent snapshot was taken e Take anew snapshot takes a new snapshot of the virtual machine state after it is powered off e Askme always asks what you want to do with snapshots when you power off See Using Snapshots on page 273 for more information on setting these options Guest Isolation Windows only Virtual Machine Settings Hardware Options Settings Summary Guest isolation General TechPubsT ools2_FM7WW Enta drag and drop to and from this virtual D Power machine Shared Folders Enabled Enable copy and paste to and from this virtual chine Enabled Enabled Normal Normal Enable drag and drop to and from this virtual machine Select this option if you want to drag and drop files from the host to the virtual machine and vice versa One reason to leave the drag and drop feature disabled is to prevent files from accidentally being transferred between the virtual machine and the host Enable copy and paste to and from the virtual machine Select this option if you want to copy and paste files from the host to the virtual machine and vice versa 99 VMware Workstation 5 User s Manual Virtual Machine Settings ea Hardware Options Settings cna Process priorities E General TechPubsT ools2_FM7WW
38. Choose Edit gt Preferences b Click Input c Deselect Ungrab when cursor leaves window 386 www vmware com CHAPTER 13 Configuring Video and Sound Enabling Accelerated 3 D for a Guest Operating System To enable the guest operating system for accelerated 3 D 1 2 4 Power on the virtual machine Install VMware Tools Note It is critical for stability that you install the version of VMware Tools that matches the version of VMware Workstation you are running Install DirectX 9 0c End User Runtime This download is available from Microsoft at www microsoft com downloads search aspx displaylang en amp categoryid 2 Install and run your 3 D applications Known Issues Common problems for Direct3 D experimental support include the following Switching tabs in the VMware Workstation console does not work while 3 D applications are running Switching between full screen and windowed mode does not work while 3 D applications are running Running multiple 3 D applications simultaneously may crash the Workstation application When a 3 D application is running you cannot suspend or resume the virtual machine and you cannot take snapshots Graphical corruption occurs such as e Screenshot or movie capture displays graphical corruption for the 3 D area of the screen e The guest cursor occasionally has a halo of corruption usually white when mousing over 3 D regions in the guest operating system 387
39. Clones on page 291 e Full Clones and Snapshots of the Parent on page 291 Creating Clones on page 292 e The Clone Virtual Machine Wizard on page 292 aking a Linked Clone of a Linked Clone on page 295 aking a Full Clone of a Linked Clone on page 295 Working with Clones on page 295 etwork Identity for a Clone on page 295 e The Linked Clone Snapshot on page 296 Linked Clones and Access to the Parent Virtual Machine on page 296 289 VMware Workstation 5 User s Manual Understanding Clones A clone is a copy of an existing virtual machine The existing virtual machine is called the parent of the clone When the cloning operation is complete the clone is a separate virtual machine though it may share virtual disks with the parent virtual machine see Full and Linked Clones on page 291 e Changes made to a clone do not affect the parent virtual machine Changes made to the parent virtual machine do not appear in a clone e Aclone s MAC address and UUID are different from those of the parent virtual machine If you want to save the current state of the virtual machine so you can revert to that state in case you make a mistake take a snapshot If you want to make a copy of a virtual machine for separate use create a clone Why Make a Clone Installing a guest operating system and applications can be time consuming With clones you can make many copies of a virtual machine from a single installation and c
40. Devices tab allows you to enable or disable removable devices You can also enable or disable removable devices in VM gt Removable Devices The Scripts Tab VMware Tools Properties K Options Devices Scripts Shared Folders Shrink About Script Event Suspend Guest Operating System Use Script Bun Now Cancel Help Use the Scripts tab to enable disable and run scripts for the Suspend Resume Power On and Power Off buttons Windows hosts If the virtual machine is configured to use DHCP the script executed when suspending a virtual machine releases the IP address of the virtual machine The script executed when resuming a virtual machine renews the IP address of the virtual machine Linux hosts The script executed when suspending a virtual machine stops networking for the virtual machine The script executed when resuming a virtual machine starts networking for the virtual machine To run one of these scripts at some other time select the script you want from the drop down menu then click Run Now To disable all scripts deselect Use Scripts Note Scripts cannot be run in Windows 95 NetWare and FreeBSD guest operating systems Note Scripts in Windows NT and Windows Me guest operating systems do not release and renew the IP address 151 VMware Workstation 5 User s Manual The Shared Folders Tab VMware Tools Properties E Options Devices Scripts SI S
41. Ethernet Bridged Quse Controller Present W Audio Default adaoter M Notes Type here to enter notes For this virtual machine Summary view for a virtual machine Windows host You can examine settings in the Summary view at any time by clicking the Summary toolbar button However some settings can be changed only when the virtual machine or team is powered off not running or suspended See Adding Configuring and Removing Devices in a Virtual Machine on page 182 or Editing Team Settings on page 319 for information about editing settings www ymware com CHAPTER 4 Learning VMware Workstation Basics Note Summary tabs are displayed only for virtual machines that are currently open To open a virtual machine that is not displayed choose File gt Open gt Virtual Machine navigate to the virtual machine s vmx file and select Open The summary console tab remains visible as long as the virtual machine remains open The Status Bar In the Summary view messages from VMware Workstation appear in the status bar at the bottom left of the summary window awu do not have VMware Tools installed The status bar For example the status bar displays an alert if the version of VMware Tools in a virtual machine does not match your version of Workstation The status bar displays an icon for each removable device On a Windows host you can right click an icon to disconnect it or edit its configuration 77 VMware Wo
42. If you want to connect a physical device to a virtual device always use the autodetect option when configuring the virtual machine The autodetect option allows the virtual machine to adapt to the user s system and works whether the host operating system is Windows or Linux Note that users who actually have no physical device at all will receive a warning message If you want to connect a CD ROM or floppy to an image file that you ship with the virtual machine make sure the image file is in the same directory as the virtual machine and that the virtual machine uses a relative path to access the image file Absolute paths will probably not work on a user s machine and vary depending on the host operating system If you want both a physical CD ROM and an image you should provide two virtual CD ROM devices in the virtual machine VMware Player does not provide a way in the user interface to switch a single CD ROM device between a physical CD ROM and an image This also means that in the unlikely case that you want to ship multiple images the user will not be able to switch between them 207 VMware Workstation 5 User s Manual 208 Choose a reasonable amount of memory to allocate to the virtual machine If the user s host machine does not have enough physical memory to support the memory allocation the player cannot power on the virtual machine Be sure to install VMware Tools in the virtual machine VMware Tools significantly i
43. Network 366 DHCP on the NAT Network 366 DNS on the NAT Network 367 External Access from the NAT Network 367 Advanced NAT Configuration 368 Custom NAT and DHCP Configuration on a Windows Host 372 Considerations for Using NAT 373 Using NAT with NetLogon 373 Sample Linux vmnetnat conf File 375 Using Samba with Workstation 378 Modifying Your Samba Configuration 378 Using a Samba Server for Both Bridged and Host Only Networks 378 Using Samba without Network Access 378 12 www vmware com Configuring Video and Sound Setting Changing Screen Color Depth on the Host Screen Color Depth Changing Screen Color Depth in the Virtual Machine Using Full Screen Mode on a Linux Host Experimental Support for Direct3D Audience for Direct3D Experimental Support Accelerated 3 D Limitations Enabling Accelerated 3 D Known Issues Helping VMware with Experimental Support Configuring Sound 379 380 380 381 382 383 383 384 384 387 388 389 Installing Sound Drivers in Windows 9x and Windows NT Guest Operating Systems Connecting Devices Using Parallel Ports Para Installation in Guest Operating Systems Con Special Notes for the lomega Zip Drive Using Serial Ports Usin lel Ports figuring a Parallel Port on a Linux Host g a Serial Port on the Host Computer Usin g a File on the Host Computer Connecting an Application on the H
44. Open the virtual machine settings editor VM gt Settings 2 Click Add to start the Add Hardware Wizard 3 Select Serial Port then click Next Serial Port Type What media should this virtual serial port access Serial port Use physical serial port on the host Output to fle Output to named pipe 4 Select Output to named pipe then click Next Specify Named Pipe Which named pipe should this serial port connect to Named pipe Apipe com 1 This end is the server v The other end is an application v Device status Connect at power on 5 Use the default pipe name or enter another pipe name of your choice The pipe name must follow the form pipe lt namedpipe gt that is it must begin with pipe 6 Select This end is the server or This end is the client In general select This end is the server if you plan to start this end of the connection first 7 Select The other end is an application www vmware com CHAPTER 14 Connecting Devices 8 By default the device status setting is Connect at power on You may deselect 11 this setting if you wish Click Advanced if you want to con option is of interest primarily to de communicate over a serial connec figure this serial port to use polled mode This velopers who are using debugging tools that tion For more information see Special Configuration Options for Advanced Users on page 405 Click Finish then click OK
45. REDO files to the new host computer 5 Start VMware Workstation 5 again and open the new virtual machine you just created Choose VM gt Settings 6 Be sure the virtual machine is configured to use the virtual disk files you moved from the original host You need to confirm that the new disk s settings IDE or SCSI and the file name for the first vmdk file match those that were used on the original host machine The device listing for the hard drive shows whether it is SCSI or IDE If that setting does not match the virtual disk you are moving select the hard disk and click Remove Then click Add and use the Add Hardware Wizard to add an IDE or SCSI disk as appropriate To specify IDE or SCSI when you reach the Disk File screen in the wizard click the Advanced button Be sure the filename and path for the virtual disk match the actual filename and location for the first vmdk file used by the virtual machine you are moving Moving VMware Workstation 2 x Virtual Machines If you have created a virtual machine using VMware Workstation 2 x you must upgrade it under VMware Workstation 3 or 4 VMware Workstation 5 does not support VMware Workstation 2 virtual machines 200 www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Considerations for Moving Workstation Disks in Undoable Mode Once you commit or discard changes made to a disk in undoable mode you can move your disk between Linux and Windows
46. Teams on page 310 for a description of this feature Suspend This button stops a virtual machine or team in a manner that allows you to resume your work later as if you never left You may be familiar with the concept of suspending your work on a laptop See Using Suspend and Resume on page 272 for a description of this feature Power On or Resume This button powers on a selected virtual machine or team that is powered off or resumes a virtual machine or team that is suspended e Power on See Starting a Virtual Machine on page 159 or Starting and Stopping Teams on page 310 for a description e Resume See Using Suspend and Resume on page 272 for a description 79 VMware Workstation 5 User s Manual Reset This button resets a virtual machine or team like the reset button on a physical PC Snapshot This button allows you to save the state of a virtual machine in the same manner you might save a word processing document You can come back later to that state if you make a mistake with the Revert button See Using Snapshots on page 273 for a description of this feature Revert This button allows you to return a virtual machine to the parent state a state previously preserved by taking a snapshot See Using Snapshots on page 273 for a description of this feature Manage Snapshots This button opens the snapshot manager where you can view the virtual machine s existing snapshots revert to a snapshot
47. Telephone Support Support Offeri Reporting Problems Experimental Support Bit Bit Resources pport ngs Where to Go Next Installing VMware Workstation Selecting Your Host System Upgrading from Previous Versions Workstation Cannot Share a Host with Other VMware Products Installing VMware Workstation 5 on a Windows Host nstalling Workstation on a Windows Host nstalling VMware Workstation Silently Uninstalling VMware Workstation 5 on a Windows Host Installing VMware Workstation 5 on a Linux Host Before Installin nstalling Workstation on a Linux Host Configuring with vmware config pl Web Browser Required Uninstalling VMware Workstation 5 on a Linux Host g ona Linux Host Where to Go Next Upgrading VMware Workstation Preparing for the Upgrade Before You Install VMware Workstation 5 Upgrading on a Windows Host Upgrading from Version 4 or an Earlier Version 5 Release Upgrading from Version 3 to Version 5 Upgrading on a Linux Host Using Workstation 4 Virtual Machines in Workstation 5 Create Everyth ing New from the Start Ww Ko fi p e a S E S E D E O E E T FaWUAAAN 61 62 62 65 65 65 66 67 67 Use a Legacy Virtual Machine without Upgrading Use a Legacy Virtual Machine with Upgrade Where to Go Next Learning VMware Workstation Basics Launching VMware
48. The new snapshot manager displays thumbnails of all your snapshots on a single screen making it easy for you to track and revert to a previously saved snapshot Also when reverting to a previously saved snapshot Workstation creates a new branch automatically so other snapshots continue to be available See Using Snapshots on page 273 Enhanced Snapshot Management New in v5 5 In the snapshot manager you can now select and delete multiple snapshots at once See Selecting a Snapshot on page 280 Workstation 5 5 also enhances the command line interface vmrun so you can manage snapshots of virtual machines more easily With simple vmrun commands you can now quickly create delete list and go to specific snapshots See Command Line Application on page 104 Teams Teams functionality makes it easier to manage connected virtual machines and simulate real world multitier configurations A team is your designated group of virtual machines and the private networks that connect them Teams allow you to configure power operations such as powering on and off and suspending or resuming virtual machines in the exact sequence you desire You determine network characteristics between the virtual machines in a team including network bandwidth and packet loss percentages The console view displays active thumbnails of all the virtual machines in a team allowing you to easily identify and switch between any of the virtual machines on your team
49. This can happen regardless of the host operating system As part of booting a physical PC or a virtual machine the BIOS passes control to code located in the master boot record MBR of the boot device LILO begins running from the MBR and in order to finish running correctly it needs access to the native Linux partition where the rest of LILO is located usually the partition with the boot directory If LILO can t access the rest of itself an error message like the one above appears To avoid the problem follow the configuration steps below and be sure to select the native Linux partition where the rest of LILO is located The next time the virtual machine tries to boot the LILO code in the MBR should be able to access the rest of LILO and display the normal LILO prompt Configuring a Windows Host Use the following steps to run a guest operating system from a physical disk Note Ifyou use a Windows host s IDE disk in a physical disk configuration you must not configure it as the slave on the secondary IDE channel if the master on that channel is a CD ROM drive 1 Ifyou are running a Windows guest operating system read Setting Up Hardware Profiles in Virtual Machines on page 247 You should boot the guest operating system natively on the computer and create a hardware profile for the virtual machine before proceeding 2 Create a separate configuration for each guest operating system To configure a virtual machine to run from a
50. USE Linux 10 linux 7 0 Enterprise Server 8 Workstation 8 Linux Desktop 9 Experi mental support for Novell Linux Desktop 9 SP2 beta Sun Java Desktop System JDS 2 Turbo Ubun Ubun inux Desktop 10 u Linux 5 10 u Linux 5 04 Linux 64 Bit Red Red H Red SUSE SUSE SUSE SUSE SUSE Experi Experi at Enterprise Linux 4 at Enterprise Linux 4 0 update 2 beta ot at Enterprise Linux 3 Linux 10 Linux Enterprise Server 9 Linux Pro 9 3 Linux Pro 9 2 Linux Pro 9 1 mental support for Ubuntu Linux 5 10 mental support for Ubuntu Linux 5 04 CHAPTER 1 Introduction and System Requirements 39 VMware Workstation 5 User s Manual Novell Netware e Netware Server 5 1 SP8 6 0 SP4 6 5 SP3 FreeBSD 32 Bit e FreeBSD 4 0 4 1 4 2 4 3 4 4 4 5 4 6 2 4 8 5 0 5 1 5 2 5 3 5 4 Note If you use SCSI virtual disks larger than 2GB with FreeBSD 4 0 4 3 there are known problems and the guest operating system does not boot To work around this issue see the VMware Guest Operating System Installation Guide available from the VMware Web site or from the Help menu FreeBSD 64 Bit e Experimental support for FreeBSD 5 3 5 4 Sun Solaris 32 Bit e Experimental support for Solaris x86 Platform Edition 9 10 beta Sun Solaris 64 Bit e Experimental support for Solaris 10 www vmware com 40 CHAPTER 1 Introduction and System Requirements Technical
51. VMware Tools from the Command Line with the Tar Installer on page 143 Installing VMware Tools from the Command Line with the RPM Installer on page 144 Installing VMware Tools within X You can install VMware Tools within X using the tar installer in a terminal window See Installing VMware Tools from the Command Line with the Tar Installer on page 143 To install VMware Tools from X with the RPM installer 1 Choose VM gt Install VMware Tools The guest operating system mounts the VMware Tools installation virtual CD Double click the VMware Tools CD icon on the desktop Note In some Linux distributions the VMware Tools CD icon may fail to appear when you install VMware Tools within an X windows session on a guest In this case you should continue installing VMware Tools as described in Installing VMware Tools from the Command Line with the Tar Installer on page 143 beginning with step 3 Double click the RPM installer in the root of the CD ROM Enter the root password Click Continue The installer prepares the packages Click Continue when the installer presents a dialog box saying Completed System Preparation A dialog appears for Updating system with a progress bar When the installer is done VMware Tools are installed There is no confirmation or finish button In an X terminal as root su configure VMware Tools vmware config tools pl Respond to the questions the installer displays on the screen Pre
52. Workstation Launching VMware Workstation on a Windows Host Launching VMware Workstation on a Linux Host Overview of the VMware Workstation Window The Home Page Summary View and Console View The Toolbar The Favorites List Checking for Product Updates Setting Preferences for VMware Workstation Workspace nput Hot Keys Display emory Priority Lockout Windows Hosts Only Virtual Machine Settings Hardware Options Command Line Reference Startup Options on a Linux Host Startup Options on a Windows Host Command Line Application Keyboard Shortcuts What Files Make Up a Virtual Machine Where to Go Next Creating a New Virtual Machine Setting Up a New Virtual Machine Importing Virtual Machines and System Images from Other Formats Virtual Machine Importer Overview Importer Requirements How Virtual Machine and System Image Settings Are Affected Opening and Importing a Virtual Machine or System Image 67 68 70 13 14 25 26 26 28 www vmware com Troubleshooting the Importer 34 Installing a Guest Operating System and VMware Tools 37 Example Installing Windows XP as a Guest Operating System 38 Installing VMware Tools 40 Upgrading VMware
53. Workstation Cloning a Virtual Machine A clone is a copy of a virtual machine You can do anything with a clone that you could with the original virtual machine Installing a guest operating system and applications can be time consuming By cloning a virtual machine you can easily deploy many copies of a fully configured virtual machine without the need to install the same operating system and applications in each copy Clones may be linked or full e A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation Ongoing operation of a full clone is entirely separate from the parent virtual machine e Alinked clone is a copy of a virtual machine that shares virtual disks with the parent virtual machine in an ongoing manner This conserves disk space and allows multiple virtual machines to use the same software installation The Clone Virtual Machine Wizard automatically copies everything required for a duplicate virtual machine You don t have to locate the original virtual machine files identify the files needed and copy them manually The Clone Virtual Machine Wizard automatically creates a new MAC address and other unique identifiers for the duplicate virtual machine Refer to Cloning a Virtual Machine on page 289 for more information regarding clones 165 VMware Workstation 5 User s Manual 166 Deleting a Virtual Machine Workstation 5 inclu
54. Workstation 5 5 or later running on a multiprocessor host machine to open a virtual machine created in VMware ESX Server that has one or more virtual processors However in Workstation you cannot power on or resume a virtual machine that has more than two virtual processors assigned even if more processors were assigned when the virtual machine was created in ESX Server If you use Workstation to open a virtual machine that has more than two virtual processors assigned the virtual machine s summary view and the virtual machine settings editor VM gt Settings will display the number of processors as Other x where x is the number of processors originally assigned in ESX Server Workstation preserves this original configuration setting for the number of processors even though two is the maximum number of processors supported You must change this setting to two processors before you can power on the virtual machine in Workstation Note that once you commit a change to this setting by clicking OK in VM gt Settings the original setting for number of processors is discarded and no longer appears as an option in VM gt Settings www vmware com CHAPTER Performance Tuning The following sections offer suggestions for getting the best performance from VMware Workstation and your virtual machines Configuring and Maintaining the Host Computer on page 432 Configuring VMware Workstation on page 435 Monitoring Virtual Machin
55. a Virtual Machine 3 Select the state of the parent from which you want to create a clone and click Next Clone Virtual Machine Wizard Clone Source Which state do you want to create a clone from Clone source From current state Creating a inked clone rom the curent state wil create a new snapshot O From snapshot Snapshot 1 Description lt Back Next gt You can choose to create a clone from either of two states e From the parent s current state Workstation creates a snapshot of the virtual machine before cloning it e From any snapshot of the parent select the snapshot name from a drop down menu of existing snapshots 4 Select the type of clone you want to create and click Next Clone Virtual Machine Wizard Clone Type How do you want to clone this vitual machine Clone method O lCreaie a linked clone A inked clone s a letenos the cg vu machine and nits lee dick space to store However tun without access to the orignal vitual machine O Create a full clone AE A E Ra o eee n E a This vitual machine is fully independent but requires more disk space to store You can choose to make a full clone or a linked clone See Full and Linked Clones on page 291 for a description of the differences 5 Type a name and a path for the cloned virtual machine and click Finish Clone Virtual Machine Wizard Name of the New Virtual Machine What name would you Ike to use for th
56. a snapshot be aware of other activity going on in the virtual machine and the likely impact of reverting to that snapshot In general it is best to take a snapshot when no applications in the virtual machine are communicating with other computers The potential for problems is greatest if the virtual machine is communicating with another computer especially in a production environment Consider a case in which you take a snapshot while the virtual machine is downloading a file from a server on the network After you take the snapshot the virtual machine continues downloading the file communicating its progress to the server If you revert to the snapshot communications between the virtual machine and the server are confused and the file transfer fails Or consider a case in which you take a snapshot while an application in the virtual machine is sending a transaction to a database on a separate machine If you revert to that snapshot especially if you revert after the transaction starts but before it has been committed the database is likely to be confused See Snapshot Actions as Background Activity on page 278 277 VMware Workstation 5 User s Manual 278 Excluding Disks from Snapshots In certain configurations you may want to have some disks revert to a snapshot while other disks retain all changes You can exclude virtual disks from a snapshot by changing the disk mode For example you may want a snapshot to prese
57. also want to check the VMware Player Discussion Forum on the VMware VMTN Web site at www vmware com community forum jspa forum D 123 The Forum is a site where VMTN members can exchange information questions and comments with each other regarding VMware products services and product support issues Running VMware Player VMware Player is included in the Workstation 5 5 distribution When you install Workstation 5 5 the application file vmp layer exe Windows or vmplayer Linux is stored with the rest of your Workstation program files To run VMware Player 1 Open VMware Player Select VMware Player from the Start gt Programs menu in Windows or from the corresponding program menu in a Linux X session or Open VMware Player from a command line In Windows enter lt path gt vmplayer exe In Linux enter lt path gt vmplayer where lt path gt is the appropriate path on your system to the application file 2 Open a virtual machine When you launch the player it displays a dialog box in which you can enter or browse for the configuration file of the virtual machine 205 VMware Workstation 5 User s Manual you want to play You can use the field Files of type to filter the files displayed by file extension so you can browse to the configuration file more easily When you have entered or selected a virtual machine configuration file click Open The player automatically opens the virtual machine and powers i
58. be changed mks ctlAltDel ignore TRUE mks fullscreen allowScreenSaver TRUE fullScreenSwitch onSeparateDesktop TRUE msg autoAnswer TRUE 466 www vmware com CHAPTER 16 Special Purpose Configuration Options Starting and Stopping Virtual Machines on the User s Computer Use the vmware full screen command to run VMware Workstation in full screen switch mode and to start and stop virtual machines on a user s computer The command can pass certain information to the virtual machine when it starts As administrator you must decide how to issue the command For example you may use a custom application or script running on the host operating system to issue one or more vmware fullscreen commands Or you can include the command to start a virtual machine in a shortcut in the host operating system s startup group so the virtual machine starts automatically when the user logs on to the host computer The vmware fullscreen command must be issued once for each virtual machine you want to start or stop vmware fullscreen poweron s variable value name lt alias gt directkey lt keyspec gt s fullscreen lt config file gt When you use the optional switches shown here the poweron switch is required and must be the first switch after the vmware fullscreen command Provide the full path to the virtual machine s configuration vmx file at the end of the command line The complete command must be enter
59. configuration on machines used as NFS file servers for example If a virtual machine using NAT attempts to connect to a server that requires the client to use a source port below 1024 it is important that the NAT device forward the request from a port below 1024 You can specify this behavior in the vmnetnat conf file This behavior is controlled by entries in sections headed privilegedUDP and privilegedTCP You may need to add settings to or modify settings in either or both of these sections depending on the kind of connection you need to make You can set two parameters each of which appears on a separate line autodetect lt n gt The autodetect setting determines whether the VMware NAT device automatically attempts to map virtual machine source ports below 1024 to NAT source ports below 1024 A setting of 1 means true A setting of 0 means false On a Windows host the default is 1 true On a Linux host the default is 0 false www vmware com CHAPTER 12 Configuring a Virtual Network port lt n gt The port setting specifies a destination port where lt n gt is the port on the server that accepts the connection from the client Whenever a virtual machine connects to the specified port on any server the NAT device attempts to make the connection from a source port below 1024 You may include one or more port settings in the privilegedUDP or privilegedTCP section or in both sections as required for the c
60. connection For more information see Special Configuration Options for Advanced Users on page 405 403 VMware Workstation 5 User s Manual 9 Click Finish then click OK to close the virtual machine settings editor Linux Host In the server virtual machine 1 Click Add to start the Add Hardware Wizard 2 3 4 5 Open the virtual machine settings editor VM gt Settings Select Serial Port then click Next Select Output to named pipe then click Next In the Path field enter tmp lt socket gt or another Unix socket name of your choice Select This end is the server Select The other end is a virtual machine By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 Click Finish then click OK to save your configuration and close the virtual machine settings editor In the client virtual machine 1 2 3 4 5 Open the virtual machine settings editor VM gt Settings Click Add to start the Add Hardware Wizard Select Serial Port then click Next Select Output to named pipe then click Next In the Path field enter tmp lt socket gt or another
61. contains pointers to the other files in the set The other files used for that disk are automatically given names based on the first file s name 213 VMware Workstation 5 User s Manual 214 For example a Windows XP Professional virtual machine using the default configuration with files that grow as needed stores the disk in files named Windows XP Professional vmdk Windows XP Professional s001 vmdk Windows XP Professional s002 vmdk and soon If the disk space is allocated in advance the names are similar except that they include an instead of an s for example Windows XP Professional 001 vmdk If you are using a physical disk the vmdk file stores information about the physical disk or partition used by the virtual machine Lock Files A running virtual machine creates lock files to prevent consistency problems on virtual disks If the virtual machine did not use locks multiple virtual machines might read and write to the disk causing data corruption Lock files are always created in the same directory as the vmdk files The locking methods used by VMware Workstation on Windows and Linux hosts are different so files shared between them are not fully protected If you use a common file repository that provides files to users on both Windows and Linux hosts be sure that each virtual machine is run by only one user at a time When a virtual machine is powered off it removes the lock files it created I
62. disk drives efficient VMware Workstation on a Windows Host Note The items in this section describe performance of VMware Workstation on a Windows host For tips on configuring VMware Workstation on a Linux host see VMware Workstation on a Linux Host on page 440 e Process Scheduling e Windows Host Disk Caching Process Scheduling Note The information in this section was created to address scheduling problems with Windows NT Although Windows NT is no longer supported as a host OS VMware currently has no corresponding information for Windows 2000 Windows XP or Windows Server 2003 hosts The process scheduler on Windows NT does not necessarily schedule processes in a way that allows you to get the best performance from your particular combination of virtual machines and applications running on the host VMware Workstation on a Windows host provides configuration options that let you adjust scheduling priorities to meet your needs These configuration options are available from the Edit gt Preferences gt Priority and VM gt Settings gt Options gt Advanced menu options These menu items allow you to specify either high or normal priority when the mouse and keyboard are grabbed by the virtual machine and either normal or low priority when they are not grabbed www vmware com CHAPTER 15 Performance Tuning Global priority is taken as the default across all virtual machines Local priority overrides the global setting
63. disk are shrunk The status of the shrink process appears at the bottom of the system console devicelist Lists each removable device in the virtual machine its device ID and whether the device is enabled or disabled Removable devices include the virtual network adapter CD ROM and oppy drives disabledevice lt device Disables the specified device or devices in the virtual machine name gt f no device is specified then all removable devices in the virtual machine are disabled enabledevice lt device Enables the specified device or devices in the virtual machine If name gt no device is specified then all removable devices in the virtual machine are enabled 153 VMware Workstation 5 User s Manual vmwtool Command Definition synctime on off Lets you turn on or off synchronization of time in the guest operating system with time on the host operating system By default time synchronization is turned off Use this command without any options to view the current ime synchronization status You can synchronize the time in the guest operating system with time on the host operating system only when the time in he guest operating system is earlier than the time set in the host idle on off Lets you turn the CPU idler on or off By default the idler is urned on The CPU idler program is included in VMware Tools for NetWare guests The idler program is needed because
64. display mode in which the virtual machine s display fills most of the screen In this mode tabs at the top of the screen allow you to switch quickly from one running virtual machine to another See also Full screen mode Resume Return a virtual machine to operation from its suspended state When you resume a suspended virtual machine all applications are in the same state they were when the virtual machine was suspended See also Suspend Revert to snapshot Reverting to a snapshot restores the status of the active virtual machine to its immediate parent snapshot This parent is represented in the snapshot manager by the snapshot appearing to the immediate left of the You Are Here icon See also Go to Snapshot Snapshot manager and You Are Here icon Shared folder A shared folder is a folder on the host computer or on a network drive accessible from the host computer that can be used by both the host computer and one or more virtual machines It provides a simple way of sharing files between host and guest or among virtual machines In a Windows virtual machine shared folders appear as folders on a designated drive letter In a Linux virtual machine shared folders appear under a specified mount point Snapshot Asnapshot preserves the virtual machine just as it was when you took that snapshot the state of the data on all the virtual machine s disks and whether the virtual machine was powered on powered off
65. down completely before you remove the release you used to create them f the virtual machine is suspended resume it in the earlier release shut down the guest operating system then power off the virtual machine Note If you attempt to resume a virtual machine that was suspended under a different VMware product or a different version of VMware Workstation a dialog box gives you the choice of discarding or keeping the file that stores the suspended state To recover the suspended state you must click Keep then resume the virtual machine under the correct VMware product If you click Discard you can power on normally but the suspended state is lost Remove Snapshots If the virtual machine you are upgrading has a snapshot remove the snapshot before upgrading 62 www vmware com CHAPTER 3 Upgrading VMware Workstation Make Sure All Disks Are in the Same Mode Workstation 3 Only For upgrades from VMware Workstation 3 to Workstation 5 e Ifyou have an existing virtual machine with one or more virtual disks and all the disks use persistent or undoable mode upgrading is straightforward e Ifyou have an existing virtual machine with one or more virtual disks and all the disks use nonpersistent mode you need to take a few special steps when you upgrade VMware Tools See www vmware com info id 44 e Ifyou plan to use an existing virtual machine that has disks in undoable mode you must commit or discard any changes to the
66. down your host operating system Linux Windows NT Windows 2000 Windows XP or Windows Server 2003 and reboot into Windows 95 Select the Physical Machine profile when prompted Repeat steps 19 through 21 and uncheck Virtual Machine leaving Physical Machine checked 253 VMware Workstation 5 User s Manual 254 Setting Up the SVGA Video Driver for Use with a Windows 98 Guest Operating System Booted from a Physical Disk This section explains how to configure the video driver in a Windows 98 physical disk installation using VMware Workstation The steps below assume you are using Windows 98 as one of the operating systems in a dual boot or multiple boot configuration Following these steps you create separate hardware profiles for your virtual machine and your physical machine For more details on hardware profiles see Setting Up Hardware Profiles in Virtual Machines on page 247 1 Boot Windows 98 natively not in a virtual machine Right click the My Computer icon on the desktop then select Properties 2 3 Click the Hardware Profiles tab 4 5 Highlight the Original Configuration profile then click Copy Name the profile Virtual Machine then click OK You may also want to rename the Original Configuration profile to Physical Machine Click OK to close the System Properties dialog box Shut down Windows 98 and reboot the system Boot into your host operating system Linux Windows NT Windows 2000 Window
67. for the redo log file is correct n addition if you have any absolute paths pointing to any files you are moving change them to relative paths Start VMware Workstation 5 and open the virtual machine you just moved hoose File gt Open then browse to the virtual machine s configuration vmx Q file 197 VMware Workstation 5 User s Manual Moving an Older Virtual Machine This section describes the following topics e Moving VMware Workstation 3 0 Virtual Machines on page 198 e Moving VMware Workstation 2 x Virtual Machines on page 200 e Considerations for Moving Workstation Disks in Undoable Mode on page 201 Moving VMware Workstation 3 0 Virtual Machines If you have created a virtual machine using VMware Workstation 3 0 or another VMware product and you want to move it to a different computer or to another directory on your host you need to perform the tasks outlined in this section These instructions assume that you are using a virtual disk stored in a set of vmdk files on your host computer Caution It s always safest to make backup copies of all the files in your virtual machine s directory before you start a process like this This section discusses the following topics regarding moving a Workstation 3 virtual machine e Preparing Your Workstation 3 Virtual Machine for the Move on page 199 e Preparing the Workstation 5 Host Machine for a Workstation 3 Virtual Machine on page 200 www
68. host adapter e Standard 101 102 key keyboard e PS 2 compatible mouse e AMD PCnet PCl Il compatible Ethernet adapter e For 64 bit guests Intel Pro 1000 MT Server Adapter compatible e Serial ports COM1 COM4 e Parallel ports LPT1 LPT3 e Two port USB hub e Sound card compatible with the Sound Blaster AudioPCI e 82093AA IOAPIC e Processor same Processor as that on host computer e One virtual processor on a host with one or more logical processors e Two virtual processors two way virtual symmetric multiprocessing or Virtual SMP on a host with at least two logical processors See Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 This set of virtual devices is different from the set of physical hardware devices on the host computer and is independent of the underlying hardware with a few exceptions the processor itself is such an exception This feature provides a stable pla form and allows operating system images installed within a virtual machine to be migrated to other physical machines regardless of the configuration of the physical machine If an operating system is installed directly into a VMware Workstation virtua the operating system properly detects all the virtual devices by scanning the hardware However if an operating system is already installed on the physica computer for example in a dual boot configuration the operating system machine already is c
69. is empty space in the disk this process reduces the amount of space the virtual disk occupies on the host drive Shrinking a virtual disk is a convenient way to convert a virtual disk to the format supported by Workstation Virtual disks created in the new format can be recognized only by VMware Workstation 3 0 and higher This section describes the following topics e Restrictions and Requirements on page 216 CHAPTER 8 Using Disks 215 VMware Workstation 5 User s Manual 216 he Shrinking Process on page 216 c nsupported and Disabled Partitions on page 218 Restrictions and Requirements Shrinking requires free disk space on the host equal to the size of the virtual disk you are shrinking Shrinking applies only to virtual disks You cannot shrink physical disks or CD ROMs The shrink feature is not enabled if the virtual machine e Contains a snapshot e Isa parent of a linked clone e Isa linked clone The shrink feature is not enabled for a virtual machine if any of its virtual disks are e Preallocated when created No used in independent persistent mode e Legacy disks that are not in persistent mode e Booted as independent disks Note You can change the mode of a virtual disk before the virtual machine is powered on See Excluding Disks from Snapshots on page 278 for a discussion of independent disks The Shrinking Process Shrinking a disk is a two step process e Inthe first step call
70. is finished you have a virtual machine running Windows XP Don t forget to install VMware Tools as described in the next section 139 VMware Workstation 5 User s Manual 140 Installing VMware Tools Don t Forget VMware Tools It is very important that you install VMware Tools in the guest operating system With the VMware Tools SVGA driver installed Workstation supports significantly faster graphics performance The VMware Tools package provides support required for shared folders and for drag and drop operations Other tools in the package support synchronization of time in the guest operating system with time on the host automatic grabbing and releasing of the mouse cursor copying and pasting between guest and host and improved mouse performance in some guest operating systems The installers for VMware Tools for Windows Linux FreeBSD and NetWare guest operating systems are built into VMware Workstation as ISO image files An ISO image file looks like a CD ROM to your guest operating system and even appears as a CD ROM in Windows Explorer You do not use an actual CD ROM to install VMware Tools nor do you need to download the CD ROM image or burn a physical CD ROM of this image file When you choose VM gt Install VMware Tools from the VMware Workstation menu VMware Workstation temporarily connects the virtual machine s first virtual CD ROM drive to the ISO image file that contains the VMware Tools installer fo
71. key codes on the MSDN Web site At the time this manual was written the reference list was at msdn microsoft com library en us winui WinU WindowsUserInterface Userlnput VirtualKeyCodes asp 463 VMware Workstation 5 User s Manual The hot key entries also include modifier keys The modifier keys are Ctrl Alt and Shift or a combination of those keys Modifier key Value No modifier 0x0 Alt 0x1 Ctr Ox2 Shift 0x4 Ctrl Alt 0x3 Alt Shift 0x5 Ctrl Shift 0x6 Ctrl Alt Shift 0x7 When listing a key plus a modifier type the virtual key code for the key followed by a comma then type the value for the modifier key or keys For example the value entry for Ctrl Shift F1 is 0x70 0x6 Note Keep the following limitations in mind when defining cycle keys and switch keys e Do not use the Pause key with the Ctrl key You may use the Pause key with other modifier keys e Ifyou use F12 you must use one or more modifier keys You cannot use F12 alone You cannot use combinations that include only the Shift Ctrl and Alt keys These keys may be used only as modifiers in combination with some other key Hot Key for Cycling Through Virtual Machines and the Host Computer You can specify a hot key or hot key combination for cycling through the available virtual machines on a host computer Each time you press the specified hot key the screen displays the next virtual machine in order You
72. machine based on the type of the guest operating system and the amount of memory in the host computer This value also appears in the virtual machine settings editor as the recommended memory value The virtual machine settings editor also shows a value for the maximum amount of memory for best performance If you have only one virtual machine running on the host and you set virtual machine memory to this value the virtual machine can run entirely in RAM A virtual machine running completely in RAM performs better than a virtual machine that must swap some of its memory to disk The actual memory size you should give to a virtual machine depends on a few practical considerations e What kinds of applications will run in the virtual machine e What other virtual machines will contend with this virtual machine for memory resources e What applications will run on the host at the same time as the virtual machine 443 VMware Workstation 5 User s Manual 444 Note You cannot allocate more than 2 GB of memory to a virtual machine when the virtual machine s files are stored on a host file system that does not support files greater than 2 GB for example FAT The total amount of memory you assign to all virtual machines running on a single host may not exceed 4 GB Memory Use on the Host Host operating systems do not behave well when they run low on free memory for their own use When a Windows or Linux host operating system does
73. machine on the NAT network appears to be the host itself because its network traffic uses the host s IP address It is able to send and receive data using TCP IP to any machine that is accessible from the host Before any such communication can occur the NAT device must set up a mapping between the virtual machine s address on the private NAT network and the host s network address on the external network When a virtual machine initiates a network connection with another network resource this mapping is created automatically The operation is perfectly transparent to the user of the virtual machine on the NAT network No additional work needs to be done to let the virtual machine access the external network The same cannot be said for network connections that are initiated from the external network to a virtual machine on the NAT network When a machine on the external network attempts to initiate a connection with a v rtual machine on the NAT network it cannot reach the virtual machine because the NAT device does not forward the request Network connections that are initiated from outside the NAT network are not transparent 367 VMware Workstation 5 User s Manual 368 However it is possible to configure port forwarding manually on the NAT device so network traffic destined for a certain port can still be forwarded automatically to a virtual machine on the NAT network For details see Advanced NAT Configurat
74. more or larger virtual machines if you are willing to accept slower performance For details on adjusting memory settings in VMware Workstation see Memory Usage Notes on page 443 91 VMware Workstation 5 User s Manual 92 Preferences Workspace Input Hot Keys Display Memory Prionty Lockout Process prioity Input grabbed nomal x Input ungrabbed normal x A virtual machine s local settings wil override the global preferences above Snapshots Take and restore snapshots in the background ines must be restarted to take effect Process Priority Windows Hosts Only Process priority determines the precedence that the Windows process scheduler gives to your virtual machines when mouse and keyboard input are going to a particular virtual machine and when input is not going to that virtual machine You can adjust these settings to improve overall system performance based on the relative priority of work you are doing in various virtual machines and on the host computer To change the settings for a particular virtual machine and override the global settings open the virtual machine you want to adjust choose VM gt Settings click the Options tab select Advanced then use the drop down lists under Process priorities to make the setting you want for that virtual machine There is no corresponding setting on a Linux host Snapshots If you select Take and restore snapshots in the background you can cont
75. next virtual machine in the sequence This delay can be useful to reduce the load on the host CPU and to allow applications on a virtual machine to launch before another team virtual machine attempts to connect The start up sequence applies to power on power off suspend and resume operations e Power on and resume operations for virtual machines occur in the order of the sequence shown in the team settings list e Power off and suspend operations for virtual machines occur in the reverse of the order shown in the team settings list To set the start up sequence for a team see Changing the Start Up Sequence for a Team on page 320 Understanding the Start Up Sequence Delay You can set a delay between the sequential start ups of virtual machines in a team This delay is useful to avoid overloading the CPU when multiple team virtual machines start You might also use this delay to ensure that a virtual machine functioning as a server completes its start up before client virtual machines start If your virtual machine team depends on precise start up timing you may need to experiment to determine how much time your host and guest operating environments and applications need to launch www vmware com CHAPTER 11 Configuring Teams Working with the Team Console View The team console view shows each virtual machine in the team From the team console view you can select any team virtual machine to work with Displaying T
76. not have enough RAM for its own use it thrashes it constantly swaps parts of itself between RAM and its paging file on disk To help guard against virtual machines causing the host to thrash VMware Workstation enforces a limit on the total amount of RAM that may be consumed by virtual machines Some memory must be kept available on the host to ensure the host is able to operate properly while virtual machines are running The amount of memory reserved for the host depends on the host operating system and the size of the host computer s memory Memory Sharing Many workloads present opportunities for sharing memory across virtual machines For example several virtual machines may be running instances of the same guest operating system have the same applications or components loaded or contain common data VMware Workstation uses a proprietary transparent page sharing technique to securely eliminate redundant copies of memory pages With memory sharing a workload often consumes less memory than it would when running on a physical machine As a result the system can support higher levels of overcommitment efficiently The amount of memory saved by memory sharing is highly dependent on workload characteristics A workload consisting of many nearly identical virtual machines may free up more than 30 percent of memory while a more diverse workload may result in savings of less than 5 percent of memory VMware Workstation memory sharing r
77. of the new virtual machine including Multiple snapshots Streaming USB input devices Increased network bandwidth optimized disk and memory cache Support for 64 bit guest operating systems Workstation version 5 5 and later Note If your virtual machine was created in Workstation 5 0 you do not need to upgrade the virtual machine for 64 bit guest support However you do need to upgrade the Workstation 5 0 program software to version 5 5 You can install the Workstation 5 5 software directly over the Workstation 5 0 software Notes on Upgrading a Virtual Machine If you previously installed the version of VMware Tools included in Workstation 5 you must reinstall after the virtual machine upgrade and choose the Repair option If you are upgrading a virtual machine that runs from a physical disk rather than a virtual disk you may see the following error message while VMware Workstation is upgrading the virtual machine Unable to upgrade lt drivename gt One of the supplied parameters is invalid You may safely click OK to continue the upgrade process When you update a Windows XP or Windows Server 2003 virtual machine the Microsoft product activation feature requires you to reactivate the guest operating system The virtual machine upgrade is irreversible Virtual machines upgraded to Workstation 5 are incompatible with VMware Workstation 3 Workstation 4 x GSX Server 3 x and ESX Server 2 x Make backup copies of y
78. on the domain controller Note Your access is limited to shares of virtual machines that are on the same NAT network or are bridged on the same domain Sample Linux vmnetnat conf File Linux NAT configuration file host NAT gateway address ip 192 168 237 2 24 hostMAC 00 50 56 C0 00 08 enable configuration disabled by default for security reasons configport 33445 VMnet device if not specified on command line device VMnet8 Allow PORT EPRT FTP commands they need incoming TCP stream activeFTP 1 Allows the source to have any OUI Turn this one if you change the OUI in the MAC address of your virtual machines allowAnyOUI 1 udp Timeout in seconds 0 no timeout default 60 real value might be up to 100 longer timeout 30 dns This section applies only to Windows Policy to use for DNS forwarding Accepted values include order rotate burst order send one DNS request at a time in order of the name servers rotate send one DNS request at a time rotate through the DNS servers 375 VMware Workstation 5 User s Manual 376 burst send to three servers and wait for the first one to respond policy order Timeout in seconds before retrying DNS request timeout 2 Retries before giving up on DNS request retries 3 Automatically detect the DNS servers not supported in Windows NT autodetect 1 List of DNS servers to use Up to three may be specif
79. only network This adapter allows the host and the virtual machines to communicate with each other for such purposes as file sharing The NAT device never forwards traffic from the host virtual adapter DHCP on the NAT Network In order to make networking configuration easy a DHCP server is automatically installed when you install VMware Workstation Virtual machines running on the network with the NAT device can dynamically obtain their IP addresses by sending out DHCP requests The DHCP server on the NAT network which is also used in host only networking configurations dynamically allocates IP addresses in the range of lt net gt 128 through lt net gt 254 where lt net gt is the network number assigned to your AT network VMware Workstation always uses a Class C address for NAT networks IP addresses lt net gt 3 through lt net gt 127 can be used for static IP addresses IP address lt net gt 1 is reserved for the host adapter lt net gt 2 is reserved for the NAT device n addition to the IP address the DHCP server on the NAT network also sends out additional configuration information that enables the virtual machine to operate automatically This information includes the default gateway and the DNS server In he DHCP response the NAT device instructs the virtual machine to use the IP address lt net gt 2 as the default gateway and DNS server This causes all IP packets destined for he external network and DNS requests to be
80. or linked clone e The nature of the subsequent updates to the parent virtual machine disk Defragmentation tends to make the redo file grow The redo file itself can become defragmented with respect to the host file system If your use of virtual machines is strongly performance oriented you should avoid defragmenting or using linked clones and snapshots Adequate Free Disk Space For better performance avoid the situation of very low free space on the host disk Performance can degrade considerably when VMware Workstation has to use a nearly full host hard disk to write guest sparse disk snapshot checkpoint or redo files Overcommitting the Host Processors The performance of virtual machines depends on the capacity of the host machine s processor or processors and may degrade significantly if you overcommit the processors by running too many virtual machines at the same time 433 VMware Workstation 5 User s Manual 434 NIC Interrupt Coalescing Increasing host NIC interrupt coalescing can improve performance for workloads involving heavy network traffic into the guest Interrupt coalescing is a feature implemented in hardware under driver control on high performance NICs allowing the reception of a group of network frames to be notified to the operating system kernel via a single hardware interrupt www vmware com CHAPTER 15 Performance Tuning Configuring VMware Workstation This section offers adv
81. outlined below for your host operating system Setting Up the Second Host Only Interface on a Windows Host Follow these steps to set up the second host only interface on a Windows host 1 Go to Edit gt Virtual Network Settings gt Host Virtual Adapters 2 Click Add new adapter 3 Choose the virtual network on which you want to use the adapter and click OK 4 Click Apply 5 Click OK to close the virtual network editor 357 VMware Workstation 5 User s Manual Setting Up the Second Host Only Interface on a Linux Host 1 As root su run the VMware Workstation configuration program usr bin vmware config pl Use the wizard to modify your configuration After asking about a NAT network the program asks Do you want to be able to use host only networking in your virtual machines Answer Yes The wizard reports on host only networks that you have already set up on the host or if none is present configures the first host only network The wizard asks Do you wish to configure another host only network Answer Yes Repeat this step until you have as many host only networks as you want Then answer No Complete the remaining steps in the wizard When it is finished it restarts all services used by VMware Workstation Run ifconfig You should see at least four network interfaces etho lo vmnet1 and vmnet2 If the VMnet interfaces do not show up immediately wait for a minute then run the command
82. path to each file is relative to the currently active directory For example if you are in the virtual machine s directory the relative path to the virtual disk file is lt machine name gt vmdk Preparing a Workstation 5 Virtual Machine for a Move Al Shut down the guest operating system and power off the virtual machine If the virtual machine is suspended resume it then shut down the guest operating system Do one of the following e Ifyou are moving the virtual machine to a new host and have a network connection between the original host machine and the new host you are finished with the preparations on the original host Otherwise you need to have a way of moving the virtual disk vmdk files from the virtual machine s directory to the new host You could move them to a shared network directory for example or burn them to CD ROMs if they are not too large Once you know how you are going to move the virtual machine go to Moving a Workstation 5 Virtual Machine to a New Host on page 194 e Ifyou are moving this virtual machine to another directory on this host then you are ready to make the move Copy all the files in the virtual machine s original directory to the new location If you stored any files in directories other than the virtual machine directory be sure to move them into a directory of the same name and same position relative to the location of the virtual machine Start VMware Workstation and
83. physical disk or disk partition start he New Virtual Machine Wizard File gt New gt Virtual Machine and select Custom Select a Disk Which disk do you want this drive to use Dick O Create a new virtual disk A virtual disk is composed of one or more files on the host fe system which wil appear as a single hard disk to the guest operating system Vitual diske can easily be copied or moved on the same host or between hosts O Use an existing virtual disk Choose this option to reuse a previously configured disk Use a physical disk for advanced users Choose this option to give the virtual machine direct access to a local hard disk www vmware com CHAPTER 8 Using Disks When you reach the Select a Disk step select Use a physical disk Complete the wizard steps specifying the appropriate disk or partition to use for this virtual machine Note The maximum size of an IDE disk in a virtual machine is 950 GB Torun multiple guest operating systems from different physical disk partitions unmap these partitions on the host On a Windows NT host use the Disk Administrator Start gt Programs gt Administrative Tools First highlight the partition that contains the guest operating system then select Assign Drive Letter from the Tools menu In this form choose Do not assign a drive letter for the partition and click OK The unmapping happens immediately On a Windows Server 2003 Windows XP or Windows
84. powered off 1 Open the virtual machine settings editor VM gt Settings 2 Click Add to start the New Hardware Wizard 3 Select Parallel Port then click Next 4 Make the appropriate selection to use a physical parallel port or connect the virtual parallel port to a file 5 If you selected Use physical port choose the port from the drop down list If you selected Use output file enter the path and filename or browse to the location of the file Under Device status the default setting is Connect at power on Clear the check box if you want to deselect this setting www vmware com CHAPTER 14 Connecting Devices 6 Click Finish In a Windows 95 or Windows 98 guest after you add the port run the guest operating system s Add New Hardware Wizard Start gt Settings gt Control Panel gt Add New Hardware and let Windows detect the new device Configuring a Parallel Port on a Linux Host For the parallel port to work properly in a guest it must first be configured properly on the host Most issues involving parallel port functionality are a result of the host configuration Check these areas of concern the version of your Linux kernel your device access permissions and the required modules e Parallel Ports and Linux 2 2 x Kernels on page 393 e Parallel Ports and Linux 2 4 x Kernels on page 394 e Parallel Ports and Linux 2 6 x Kernels on page 395 e Device Permissions on page 396 Parallel Ports and Li
85. prompted to run vmware config pl This completes the tar archive installation instructions Skip the RPM installer instructions and continue with step 6 Using the RPM Installer a Run RPM specifying the installation file rpm Uhv VMware lt xxxx gt rpm VMware lt xxxx gt rpm_ is the installation file on the CD ROM In place of lt xxxx gt the filename contains numbers that correspond to the version and build b Run the configuration program from the command line vmware config pl www vmware com CHAPTER 2 Installing VMware Workstation 6 Press Enter to read the end user license agreement EULA You may page through it faster by pressing the space bar Ifthe Do you accept prompt doesn t appear press Q to get to the next prompt 7 The remaining prompts are worded in such a way that in most cases the default response is appropriate Note If you do not enable host only networking when you install Workstation you cannot allow a virtual machine to use both bridged and host only networking 8 The configuration program displays a message saying the configuration completed successfully If it does not display this message run the configuration program again 9 When done exit from the root account exit Install VMware Tools after you install a guest operating system See Installing VMware Tools on page 140 Configuring with vmware config pl Use vmware config pl to configure your installation of VMware Wor
86. provides this feature for advanced customers who want to explore an in progress implementation of 3 D acceleration Technical support for accelerated 3 D is not yet provided for Workstation However we encourage you to file a Support Request so we can evaluate problems you might experience with accelerated 3 D Please review Helping VMware with Experimental Support on page 388 before you file a support request 383 VMware Workstation 5 User s Manual 384 Accelerated 3 D Limitations Experimental support for Direct3D applies only to Windows 2000 and Windows XP guests on hosts running Windows 2000 Windows XP or Linux Experimental support has the following limitations e Workstation accelerates DirectX 8 applications and DirectX 9 applications that use only the subset of DirectX 8 e Support for 3 D applications is not optimized for performance e OpenGL applications run in software emulation mode Not all aspects of 3 D acceleration are enabled The following 3 D features are not accelerated e Pixel and vertex shaders e Multiple vertex streams e Hardware bump mapping environment mapping e Projected textures e Textures with one three or four dimensions Enabling Accelerated 3 D Caution Features with experimental support are not intended for production systems By default Direct3D technology is disabled You must prepare the host first the virtual machine second and the guest operating system last ww
87. size of a virtual disk use a command like the following vmware vdiskmanager x 40GB myDisk vmdk This increases the maximum capacity of the virtual disk to 40GB Renaming a Virtual Disk To rename a virtual disk first remove it from any virtual machine that contains the disk choose VM gt Settings gt lt virtualdisk gt then click Remove Then use the following vmware vdiskmanager n myDisk vmdk myNewDisk vmdk To rename the disk and locate it in a different directory use vmware vdiskmanager n myDisk vmdk lt new path gt myNewDisk vmdk Note The paths used in these examples assume a Windows host To locate the disk in a different directory but keep the same name use vmware vdiskmanager n myDisk vmdk lt new path gt myDisk vmdk After you rename or relocate the virtual disk add it back to any virtual machines that use it Choose VM gt Settings click Add then follow the wizard to add this existing virtual disk CHAPTER 8 Using Disks 235 VMware Workstation 5 User s Manual 236 Defragmenting a Virtual Disk To defragment a virtual disk use a command like the following vmware vdiskmanager d myDisk vmdk Remember you cannot defragment a virtual disk if you allocated all the disk space when you created the virtual disk You cannot defragment a physical disk See Defragmentation of Disk Drives on page 432 for a discussion of the performance impact of defragmenting drives Preparing a Virtual D
88. slow and make the virtual machine seem less responsive To disable the fade effects right click the guest operating system desktop then choose Properties gt Appearance gt Effects on Windows XP or Windows Server 2003 or Properties gt Effects on Windows 2000 and uncheck Use transition effects for menus and tool tips Full Screen Mode Run your virtual machine in full screen mode Click the Full Screen button on the VMware Workstation toolbar 451 VMware Workstation 5 User s Manual 452 Windows NT Disk Performance on Multiprocessor Hosts Some users have seen a problem in a VMware Workstation virtual machine using IDE virtual disks on a multiprocessor host computer The I O issue is especially noticeable when the virtual machine is booting Note Performance in Windows NT guest operating systems may also be affected by disk fragmentation on the host computer For details see Configuring and Maintaining the Host Computer on page 432 Improving Performance You may increase performance by enabling DMA direct memory access on the virtual hard disk s IDE channel in the virtual machine If you have a virtual disk and a DVD CD ROM attached as master and slave to the primary IDE controller channel 0 and you want to enable DMA power off the virtual machine and use the virtual machine settings editor VM gt Settings to move the DVD CD ROM drive to the secondary IDE controller channel 1 at IDE 1 0 You can enable the
89. than the default change the path that follows INSTALLDIR to specify the desired location You may use the optional REMOVE property to skip installation of certain features The REMOVE property can take one or more of the following values Value Description Authd The VMware authorization service Network Networking components including the virtual bridge and the host adapters for host only networking and NAT networking do not remove if you want to use NAT or DHCP DHCP The virtual DHCP server NAT The virtual NAT device If you specify more than one value use a comma to separate the values For example REMOVE Authd NAT Note If you specify REMOVE Network the installer skips installation of certain networking components including NAT and DHCP There is no need to specify DHCP or NAT separately 52 www vmware com CHAPTER 2 Installing VMware Workstation You may customize the installation further by adding any of the following installation properties to the command using the format PROPERTY value A value of 1 means true a value of 0 means false If you use the serial number property enter the serial number complete with hyphens XXXXX XXXXX XXXXX XXXXX Property Effect of the Property Default DESKTOP_SHORTCUT Installs a shortcut on the desktop 1 DISABLE_AUTORUN Disables CD autorun on the host 1 REMOVE_LICENSE Uninstall only Removes all stored lice
90. that contains configuration information for the selected virtual machine Guest Operating System Workstation optimizes the virtual machine for the operating system you choose in this field Version Use this field to change the setting for the guest operating system version in the virtual machine s configuration file This setting does not actually change the guest operating system itself When you set the guest operating system type in the New Virtual Machine Wizard Workstation chooses configuration defaults based on the guest type you choose Changing the guest type in this field simply changes the guest type setting in the configuration file The Version field is useful when you are upgrading the guest operating system installed in the virtual machine and you want to change the guest operating system version 95 VMware Workstation 5 User s Manual Working Directory The working directory is where Workstation stores suspended state vmss snapshot vmsn and redo log files By default this is the same directory the virtual machine files are stored in Power Virtual Machine Settings Hardware Options Settings Summary Power options S General Windows XP Pro SP2 Bower on after opening this virtual machine Erter full screen mode after powering on OD Shanes Folios Enid C Sose after powering off or suspending E Snapshots Bi Guest isolation Drag and drop enabled Power Controls E Advanced Normal Nor
91. that is available only to virtual machines within the same team See also Virtual Network and Teams Legacy virtual machine A virtual machine created for use in Workstation 4 x GSX Server 3 x or ESX Server 2 x You can use and create legacy virtual machines within Workstation 5 but new Workstation 5 features are not usable For example clones multiple snapshots and teams are not compatible with a legacy virtual machine Linked clone A copy of the original virtual machine that shares the virtual disks with the original virtual machine in an ongoing manner See also Full clone Lockout see Administrative Lockout Network address translation NAT A type of network connection that allows you to connect your virtual machines to an external network when you have only one IP network address and that address is used by the host computer If you use NAT your virtual machine does not have its own IP address on the external network Instead a separate private network is set up on the host computer Your virtual machine gets an address on that network from the VMware virtual DHCP server The VMware NAT device passes network data between one or more virtual machines and the external network It identifies incoming data packets intended for each virtual machine and sends them to the correct destination New Virtual Machine wizard A point and click interface for convenient easy creation of a virtual machine configuration I
92. the IP address settings for other components such as DHCP NAT and host virtual adapter on that virtual network to reflect the new settings The specific settings that are automatically updated include DHCP lease range DHCP server address NAT gateway address and host virtual 341 VMware Workstation 5 User s Manual adapter IP address However if you have changed any of these settings from its default value even if you have later changed the setting back to the default VMware Workstation does not update that setting automatically Workstation presumes that custom settings are not to be modified e Inthe DHCP settings dialog box you can change the range of IP addresses provided by the VMware Workstation DHCP server on a particular virtual network Settings YMnet host Subnet Netmask 5 25 255 Start IP address 168 198 128 End IP address 32 168 198 254 Broadcast address 6198 258 Lease duration for DHCP clients Days Hours Minutes Defauitleasetime 0 gt Magleasetime 0 Ca You can also use this dialog box to set the duration of DHCP leases provided to clients on the virtual network 3 Click OK to save your changes and close the virtual network editor 342 www vmware com CHAPTER 12 Configuring a Virtual Network Enabling Disabling Adding and Removing Host Virtual Adapters When you install VMware Workstation two network adapt
93. the installation instructions Installing VMware Workstation 5 on a Linux Host on page 54 The RPM Upgrade Process Take the following steps to upgrade to version 5 if you used the RPM installer to install Workstation 3 or 4 or an earlier release of version 5 If you are currently using version 3 0 you need to uninstall the RPM package of prebuilt modules that was installed with 3 0 before you uninstall the 3 0 software You do not need to take this step if you are currently using version 3 1 1 Uninstall any previous version as root If you are running version 3 0 uninstall the prebuilt modules as root then uninstall VMware Workstation by running rpm e VMwareWorkstationKernelModules rpm e VMwareWorkstation lf you are running version 3 1 3 2 or 4 or an earlier release of version 5 uninstall it as root by running rpm e VMwareWorkstation Note The asterisk symbol is a wild card to account for the version number of Workstation that was previously installed 2 Install version 5 following the instructions in Installing VMware Workstation 5 on a Linux Host on page 54 66 www vmware com CHAPTER 3 Upgrading VMware Workstation Using Workstation 4 Virtual Machines in Workstation 5 There are broadly speaking three approaches you can take when you set up virtual machines Choose one of these approaches e Create Everything New from the Start on page 67 e Use a Legacy Virtual Machine without Upgrading o
94. the parent snapshot of the current state You can choose any snapshot To go to a snapshot choose VM gt Snapshot and select the snapshot by name or in the snapshot manager select a snapshot and click Go To Reverting at Power Off This setting causes the virtual machine to revert automatically to the parent snapshot any time it is powered off The parent snapshot of a virtual machine is the snapshot on which the current state the You Are Here position is based see The Parent Snapshot on page 285 1 Choose VM gt Settings gt Options gt Snapshots 2 Inthe section When powering off select Revert to snapshot 285 VMware Workstation 5 User s Manual Deleting Snapshots You can delete a snapshot any time Deleting snapshots does not affect other snapshots or the current state of the virtual machine To delete snapshots 1 Choose VM gt Snapshot gt Snapshot Manager 2 Select one or more snapshots 3 Click Delete 4 Click OK in the confirmation dialog box Note You cannot delete the snapshot if the associated virtual machine is designated as a template for cloning See Linked Clones and Access to the Parent Virtual Machine on page 296 for a description of template settings for linked clones Making a Clone from a Snapshot VMware Workstation 5 snapshots are stored as changes from the parent state To create a fully independent copy of a virtual machine from a snapshot you can make a clone Note The snapsh
95. the partitions you wish to prepare for shrinking Mount Point MeN Prepare to shrink Cancel Help 3 Select the virtual disks you want to shrink then click Prepare to Shrink A dialog box tracks the progress of the wiping process Preparing C for shrinking Note If you deselect some partitions the whole disk is still shrunk However those partitions are not wiped for shrinking and the shrink process does not reduce the size of the virtual disk as much as it could with all partitions selected 4 Click Yes when VMware Tools finishes wiping the selected disk partitions VMware Tools aes 2 2 Do you want to shrink your disks now A dialog box tracks the progress of the shrinking process Shrinking disks may take considerable time VMware Workstation Shrinking disk C My Virtual Machines vm111 Sa wirXPPro winksPPra Windows XP Professional vmdk Cancel 217 VMware Workstation 5 User s Manual 218 5 Click OK to finish VMware Tools DL The shrink process completed ee Unsupported and Disabled Partitions In some configurations it is not possible to shrink virtual disks If your virtual machine uses such a configuration the Shrink tab displays information explaining why you cannot shrink your virtual disks VMware Tools Properties x Options Devices Scripts Shared Folders Shiink About Supported partitions Unsupparter is The followin
96. the silent installation features of the Microsoft Windows Installer Before installing VMware Workstation silently you must ensure that the host computer has version 2 0 or higher of the MSI runtime engine This version of the installer is available in versions of Windows beginning with Windows XP and is available separately from Microsoft 51 VMware Workstation 5 User s Manual The following steps outline the procedures for a silent install For additional details on using the Microsoft Windows Installer see the Microsoft Web site 1 Silently extract the administrative installation image from the VMware Workstation installer setup exe a s v qn TARGETDIR lt InstallTempPath gt setup exe is the name of the installer on the CD distribution If you are using a downloaded installer the filename is similar to VMwareWorkstation lt XXXX gt exe where lt xxxx gt is a series of numbers representing the version and build numbers lt Instal1lTempPaths is the full path to the folder where you want to store the administrative installation image 2 Run a silent installation using msiexec and the administrative installation image you extracted in the previous step msiexec i lt InstallTempPath gt VMware Workstation msi INSTALLDIR lt PathToProgramDirectory gt ADDLOCAL ALL REMOVE lt featurename featurename gt qn Enter the command on one line If you want to install VMware Workstation in a location other
97. them for shrinking After you mount a virtual disk volume use the virtual disk manager to prepare the volume for shrinking Once you prepare a volume unmount it then repeat the process for each volume of the virtual disk After you prepare all the volumes of the virtual disk you can shrink the virtual disk For examples see Preparing a Virtual Disk for Shrinking on page 236 and Shrinking a Virtual Disk on page 236 www vmware com Examples Using the VMware Virtual Disk Manager The following examples illustrate how to use the virtual disk manager You run the virtual disk manager from a command prompt Creating a Virtual Disk To create a new virtual disk use a command like the following vmware vdiskmanager c t 0 s 40GB a ide myDisk vmdk This creates a 40GB IDE virtual disk named myDisk vmdk The virtual disk is contained in a single vmdk file The disk space is not preallocated Converting a Virtual Disk To convert a virtual disk from preallocated to growable use a command like the following vmware vdiskmanager r sourceDisk vmdk t 0 targetDisk vmdk This converts the disk from its original preallocated type to a growable virtual disk consisting of a single virtual disk file The virtual disk space is no longer preallocated and the virtual disk manager reclaims some disk space in the virtual disk so it is only as large as the data contained within it Expand the Size of an Existing Virtual Disk To expand the
98. then undo if necessary thereby improving their responsiveness and effectiveness when troubleshooting end user problems Facilitate team collaboration VMware Workstation lets users easily collaborate with their colleagues and share virtual machines Once a computing environment OS associated applications disk images memory etc has been turned into a virtual machine it becomes a set of hardware independent encapsulated files that are highly portable and can be shared with any other Workstation user A virtual machine can be placed on a shared drive where others can quickly access and upload it Features in Workstation such as linked clones and video capture further facilitate team collaboration Introduce Virtual Infrastructure to your enterprise Virtual machines created in Workstation can be deployed to the other desktop and server virtualization platforms offered by VMware Introducing VMware Workstation virtualization to the desktop is an ideal first step to transforming your physical IT infrastructure into virtual infrastructure 19 VMware Workstation 5 User s Manual 20 Overview of This Manual If you re a veteran user of VMware products take a few minutes to see What s New in Version 5 on page 21 and check out Upgrading VMware Workstation on page 61 If you re new to VMware Workstation this is the place to start e The first chapters of this manual through Running page 157 introd
99. to close On your host computer configure virtual machine to use the same pi Power on the virtual machine Linux Host ll 2 3 4 5 Open the virtual machine settings he virtual machine settings editor the application that communicates with the pe name editor VM gt Settings Click Add to start the Add Hardware Wizard Select Serial Port then click Next Select Output to named pipe the n click Next In the Path field enter tmp lt socket gt or another Unix socket name of your choice Select This end is the server or This end is the client In general select This end is the server if you plan to start thi s end of the connection first Select The other end is an application By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to de velopers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 Click Finish Click OK to save your configuration and close the virtual machine settings editor On your host computer configure the application that communicates with the virtual machine to use the same Unix socket name Power on the virtual machine 401 VMware Workstation 5 User s Manua
100. toolbar by adding removing and rearranging toolbar buttons On a Windows host the toolbar buttons are arranged in three separate toolbars for power buttons snapshot buttons and view buttons On a Linux host all the buttons are contained in a single toolbar To customize the toolbar display Linux host 1 Right click any part of the toolbar to display a toolbar menu x Power Snapshot x View Desktop Style Icons Only Text Only Icons and Text Selective Text Beside Icons 2 Choose Power Snapshot or View to add or remove the corresponding toolbar buttons When a choice is checked the corresponding buttons are displayed 3 In the lower part of the menu choose the display style for toolbar buttons 81 VMware Workstation 5 User s Manual To add or remove the power snapshot or view toolbar Windows host 1 Right click any part of the toolbar to display a toolbar menu v Power Snapshot v View Customize 2 Click Power Snapshot or View to add or remove that toolbar When a toolbar is checked it is displayed To customize a toolbar Windows host 1 Open the Customize Toolbar window e Right click in the toolbar you want to customize power snapshot or view The illustration shows the Customize Toolbar window for the power toolbar The Customize Toolbar windows for the snapshot and view toolbars work the same way Customize Toolbar Available toolbar buttons Curent toolbar button
101. using Workstation 5 269 VMware Workstation 5 User s Manual 270 www vmware com CHAPTER Preserving the State of a Virtual Machine VMware Workstation 5 provides two ways to preserve the state of a virtual machine you can Suspend the virtual machine or take a Snapshot of it This chapter describes the Suspend and Snapshot features and helps you understand when to use them e Using Suspend and Resume on page 272 e Using Snapshots on page 273 Examples of Using Snapshots on page 276 What Is Captured by a Snapshot on page 277 Taking a Snapshot on page 278 The Snapshot Manager on page 280 Restoring a Snapshot Revert or Go To on page 285 Deleting Snapshots on page 286 Making a Clone from a Snapshot on page 286 Virtual Machine Settings for Snapshots on page 287 271 VMware Workstation 5 User s Manual 272 Using Suspend and Resume The suspend and resume feature is useful when you want to save the current state of your virtual machine and continue work later from the same state Once you resume and do additional work in the virtual machine there is no way to return to the state the virtual machine was in at the time you suspended To preserve the state of the virtual machine so you can return to the same state repeatedly take a snapshot For details see Using Snapshots on page 273 The speed of the suspend and resume operations depends on how much data has changed while the virtual machine has be
102. virtual disks before you remove he Workstation 3 software that you used to create them e Resume or power on the virtual machine in the earlier release shut down the guest operating system power off the virtual machine and either commit or discard changes to the disk in undoable mode when prompted e Ifthe disks are in persistent or nonpersistent mode be sure the virtual machine is completely shut down If it is suspended resume it shut down the guest operating system and power off the virtual machine e Ifyou have an existing virtual machine that has multiple virtual disks and the disks are in multiple modes the simplest approach to upgrading is to convert all the disks to persistent mode Resume or power on the virtual machine in the earlier release shut down the guest operating system power off the virtual machine and either commit or discard changes to any undoable mode disks when prompted Then open the configuration editor and change all disks to persistent mode If you need to preserve special functionality that requires disks in multiple modes review the information at www vmware com info id 40 before you upgrade Back Up Virtual Machines As a precaution back up all the files in your virtual machine directories including the vmdk or dsk vmx or cfg andnvram files for any existing virtual machines you plan to migrate to VMware Workstation 5 Depending on your upgrade path you may not be able to run your vi
103. virtual machines with Windows 9x and non Windows guest operating systems for example Linux and DOS are not compatible with VMware Virtual Machine Importer This is true even when the destination VMware platform otherwise supports that guest operating system The VMware Virtual Machine Output Compatibility e The resulting VMware virtual machine can be used with Workstation 4 x or Workstation 5 x Note Workstation 4 virtual machines are compatible with VMware GSX Server 3 0 ESX Server 2 x and ACE 1 x How Virtual Machine and System Image Settings Are Affected The VMware virtual machine created by the importer contains an exact copy of the disk state from your source virtual machine or system image with the exception of some hardware dependent drivers and sometimes the mapped drive letters Settings from the source computer that remain identical include e Operating system configuration computer name security ID user accounts profiles and preferences and so forth e Applications and data files e Each disk partition s volume serial number Since the target and the source virtual machines or system images have the same identities name SID and so on running both on the same network can result in conflicts If you are planning to redeploy the source virtual machine or system image 127 VMware Workstation 5 User s Manual 128 be aware of this issue and do not run both the source and target images or virtual
104. vmware com 198 CHAPTER 7 Moving and Sharing Virtual Machines Preparing Your Workstation 3 Virtual Machine for the Move 1 Use VMware Workstation 3 to open the virtual machine If the virtual machine has more than one virtual disk and if the virtual disks use different disk modes you must use the Virtual Machine Control Panel to change one or more of the virtual disks so they all use the same mode Be sure you know whether the virtual disk is set up as an IDE disk or a SCSI disk You can check this in the Virtual Machine Control Panel Also note the size of the virtual disk you are moving You need this information when you prepare the new host machine as described in the next section Be sure the guest operating system is completely shut down If the virtual machine is suspended resume it using the VMware product with which you created the virtual machine then shut down the guest operating system Note Do not move a suspended virtual machine from one host to another If your virtual machine is using disks in undoable made it is best to commit or discard the changes when the guest operating system shuts down If you cannot commit or discard the changes to your disk read Considerations for Moving Workstation Disks in Undoable Mode on page 201 If you have a network connection between the original host machine and the new host you are finished with the preparations on the original host Otherwise you need to have a way of mov
105. vmware com download Follow the instructions on the Web site to install the driver www vmware com CHAPTER 14 Connecting Devices Preparing a Windows NT 4 0 Guest Operating System to Use SCSI Devices Generic SCSI devices use the virtual Mylex BusLogic BT KT 958 compatible host bus adap throu er provided by the virtua gh installing the drivers a machine Some guest operating systems guide you fter you install the first SCSI device in the virtual machine On Windows NT 4 0 however you may need to install the driver manually if it is not already installed for a v gene To install the BusLogic driver in ic SCSI device irtual SCSI disk You should do so before you add a a Windows NT 4 0 guest have your Windows NT instal 1 nF Ww nN eit gt 8 ation CD available and fo low these steps Open the SCSI Adapters control panel Start gt Settings gt Control Panel gt SCSI Adapters Click the Drivers tab Click Add In the list of vendors on the left select BusLogic In the list of drivers on the right select BusLogic MultiMaster PCI SCSI Host Adapters Click OK Insert the Windows NT CD when you are prompted Click OK Reboot when you are prompted Adding a Generic SCSI Device to a Virtual Machine You can add generic SCSI devices to your virtual machine in the virtual machine settings editor When you set up a generic SCSI device the virtual machine must be powered off
106. xkeymap usekeycodeMapIfxXFree86 true to the virtual machine configuration file or to vmware config Make this change on the host machine where you run the virtual machine not on the machine with the remote X server If you are using an XFree86 based server that VMware Workstation does not recognize as an XFree86 server use this instead xkeymap usekeycodeMap true If you are using an XFree86 server running locally and the keyboard does not work correctly please report the problem to the VMware technical support department The Longer Story Unfortunately keyboard support for the PC virtual or otherwise is a complex affair To do it justice we have to start with some background information greatly simplified Pressing a key on the PC keyboard generates a scan code based roughly on the position of the key For example the Z key on a German keyboard generates the same code as the Y key on an English keyboard because they are in the same position on he keyboard Most keys have one byte scan codes but some keys have two byte scan codes with prefix Oxe0 nternally VMware Workstation uses a simplified version of the PC scan code that is a single nine bit numeric value called a v scan code A v scan code is written as a three digit hexadecimal number The first digit is O or 1 For example the left hand Ctrl key has a one byte scan code 0x1d its v scan code is 0x01d The right hand Ctrl key scan code is two bytes Oxe
107. you have multiple IDE drives configured on a system the VMware BIOS normally attempts to boot them in this sequence a Primary master b Primary slave c Secondary master d Secondary slave If you have multiple SCSI drives configured on a system the VMware BIOS normally attempts to boot them in the order of the SCSI device number If you have both SCSI and IDE drives configured the VMware BIOS normally attempts to boot SCSI drives followed by IDE drives in the order described above You can change the boot sequence using the Boot menu of the virtual machine s Phoenix BIOS To enter the BIOS setup utility power on the virtual machine and press F2 as the virtual machine begins to boot Power on the virtual machine Click the Power On button The virtual machine starts runs the Phoenix BIOS then boots from the master boot record MBR Choose the target operating system from the list of options offered by the boot manager www vmware com 12 Remember that your virtual machine hardware environment which the guest operating system is about to run in for the first time probably differs significantly from the physical hardware of your machine For Windows guest operating systems Plug and Play reconfigures Windows Set up your virtual hardware profile with the devices found and configured by Plug and Play See Setting Up Hardware Profiles in Virtual Machines on page 247 for more information 13 Install VMware Tools in yo
108. you plan to run the router software on your host computer you can skip the next section Virtual Machine 3 Connected to Both Host Only Interfaces If you plan to run the router software on a virtual machine set up a third virtual machine for that purpose 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine 2 Launch VMware Workstation and open the virtual machine 3 Edit the configuration using the virtual machine settings editor VM gt Settings Select the first network adapter in the list of devices and choose Host only VMnet1 from the drop down list on the right Select the second network adapter in the list of devices then select Custom VMnet2 from the drop down list on the right If you need to add one or more network adapters click Add then use the Add Hardware Wizard to add an adapter Now you need to configure the networking components on the host and in the virtual machines The recommended approach uses static IP addresses for all the virtual machines 1 Stop the VMnet DHCP server service Windows host Choose Edit gt Virtual Network Settings gt DHCP and click Stop service Linux host Stop the vmnet dhepa service killall TERM vmnet dhcpd 2 Install guest operating systems in each of the virtual machines 3 Install the router software on the host computer or in the third virtual machine depending on the approach you are using 362 w
109. your Windows guest operating system asks you to press Ctrl Alt Del before logging in press Ctrl Alt Ins instead Virtual Machine Location On Windows hosts VMware Workstation stores virtual machines in the My Documents folder of the user who is logged on when the virtual machine is created On Windows Server 2003 Windows XP and Windows 2000 the default folder is C Documents and Settings lt username gt My Documents My Virtual Machines lt guestOSname gt On Linux hosts VMware Workstation stores virtual machines in lt homedir gt VMware lt guestOSname gt where lt homedir gt is the home directory of the user who is logged on when the virtual machine is created 159 VMware Workstation 5 User s Manual 160 Checking the Status of VMware Tools For best performance it is important to have VMware Tools installed and running in your virtual machine After you install VMware Tools in a Windows virtual machine the VMware Tools services start automatically when you start the guest operating system When VMware Tools is running in a Windows virtual machine the VMware Tools icon appears in the system tray unless you disable the icon If the VMware Tools icon is not displayed in the system tray you can use the VMware Tools control panel in the guest operating system Go to Start gt Settings gt Control Panel or Start gt Control Panel depending on the version of Windows you are using locate the VMware Tools icon
110. 0 0x1d its v scan code is 0x11d 409 VMware Workstation 5 User s Manual An X server uses a two level encoding of keys An X key code is a one byte value The assignment of key codes to keys depends on the X server implementation and the physical keyboard As a result an X application normally cannot use key codes directly Instead the key codes are mapped into keysyms that have names like space escape x and 2 The mapping can be controlled by an X application via the function XChangeKeyboardMapping or by the program xmodmap To explore keyboard mappings you can use xev which shows the key codes and keysyms for keys typed into its window To recap a key code corresponds roughly to a physical key while a keysym corresponds to the symbol on the key top For example with an XFree86 server running ona PC the Z key on the German keyboard has the same key code as the Y ey on an English keyboard The German Z keysym however is the same as the English Z keysym and different from the English Y keysym For an XFree86 server on a PC there is a one to one mapping from X key codes to PC scan codes or v scan codes which is what VMware Workstation really uses VMware Workstation takes advantage of this fact When it is using an XFree86 server on the ocal host it uses the built in mapping from X key codes to v scan codes This mapping is keyboard independent and should be correct for most if not all anguages In other cases not an X
111. 113 e Running VMware Workstation on page 157 111 VMware Workstation 5 User s Manual 112 www vmware com CHAPTER Creating a New Virtual Machine This chapter discusses how to create a new virtual machine and install VMware Tools Setting Up a New Virtual Machine on page 114 Importing Virtual Machines and System Images from Other Formats on page 125 Installing a Guest Operating System and VMware Tools on page 137 Installing VMware Tools on page 140 e VMware Tools for Windows Guests on page 141 e VMware Tools for Linux Guests on page 142 e VMware Tools for FreeBSD Guests on page 146 e Installing VMware Tools in a NetWare Virtual Machine on page 147 VMware Tools Configuration Options on page 149 e Using the System Console to Configure VMware Tools in a NetWare Guest Operating System on page 153 113 VMware Workstation 5 User s Manual Setting Up a New Virtual Machine The New Virtu al Machine Wizard guides you through the key steps for setting up a new virtual machine helping you set various options and parameters You can then use the virtual machine settings editor VM gt Settings if you need to make any changes to your virtual machine s setup By default the new virtual machine uses an IDE disk for Windows 95 Windows 98 Windows Me Windows XP Windows Server 2003 NetWare and FreeBSD guests The default for other guest operating systems is a SCSI disk Follow these steps
112. 20 on a Windows host 419 supported device types 417 User groups 41 User interface overview 74 restricted 459 UUID 188 290 format 188 location 188 specifying 190 specifying for moved virtual machine 190 Vv VGA 172 Video resolution on a Linux host 382 See also Display Viewing shared folder 180 Virtual adapter enabling disabling adding and removing host virtual adapter 343 Virtual disk add to virtual machine 219 defined 210 475 location 116 See also Disks shrinking 215 size 35 123 220 Virtual hardware 134 Virtual machine 159 adding a virtual disk 219 adding floppy drive 228 adding or modifying an Ethernet adapter 336 adding to team 302 and SMP 429 capturing screenshot 183 constituent files 108 creating 113 creating a clone 292 defined 475 delete 166 importing other formats 125 installing software in 174 migrating 198 moving 187 moving SMP virtual machines between Workstation and ESX Server 430 name change 95 platform specifications 34 removing from Favorites list 84 resuming 161 272 settings 94 shutting down 162 163 starting 159 starting in full screen mode 467 suspending 161 272 taking and restoring snapshot 164 upgrading 67 upgrading procedure 69 window size 170 virtual machine 94 output capability 127 www vmware com Virtual Machine Importer 125 129 134 benefits 126 command line 133 Open and Import commands 128 overview 126 requirements 126 shared folder settings 135 sour
113. 204 Moving Linked Clones You can move a linked clone as you would an ordinary Workstation 5 virtual machine However if you move a linked clone or if you move its parent virtual machine make certain the clone can access the parent virtual machine for example using a shared directory or networked file server When you power on a linked clone that has been moved be prepared to update the file system path to the parent virtual machine location Caution You cannot power on a linked clone if Workstation cannot locate the original virtual machine www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Sharing Virtual Machines with VMware Player VMware Player is an application that opens and plays virtual machines created with VMware Workstation 4 and Workstation 5 GSX Server and ESX Server On Windows hosts the player also opens and plays Microsoft Virtual PC and Virtual Server virtual machines and Symantec LiveState Recovery system images VMware Player makes your VMware virtual machines accessible to colleagues partners customers and clients who do not own VMware products VMware Player is included with Workstation versions 5 5 and later Note Use of VMware Player is subject to the VMware Player End User License terms and no support including Support and Subscription will be provided by VMware for VMware Player For self help resources see the VMware Player FAQ at www vmware com products player faqs html You may
114. 265 VMware Workstation 5 User s Manual 266 Windows Server 2003 Windows XP or Windows 2000 host Use Disk Management Start gt Settings gt Control Panel gt Administrative Tools gt Computer Management gt Storage gt Disk Management Select the partition you want to unmap then choose Action gt All Tasks gt Change Drive Letter and Path Click the Remove button Use the virtual machine settings editor VM gt Settings if you want to change any configuration options from the wizard defaults for example to change the amount of memory allocated to the guest operating system At this point you are ready to begin installing the guest operating system onto the physical disk you configured for the virtual machine For more details read the installation notes for various guest operating systems in the VMware Guest Operating System Installation Guide available from the VMware Web site or from the Help menu Configuring a Linux Host I Identify the physical partition on which the guest operating system will be installed Check the guest operating system documentation regarding the type of partition on which the operating system can be installed For example operating systems like DOS Windows 95 and Windows 98 must be installed on the first primary partition while others like Linux can be installed on a primary or extended partition on any part of the drive Identify an appropriate physical partition or disk for the
115. 27 bridged networking 471 changing DHCP settings 341 changing subnet settings 341 changing the configuration 336 common configurations 329 components 327 configuring bridged networking options 338 custom configurations 333 custom networking 471 DHCP 347 DHCP server 328 dial up connection 351 dynamic domain name service 356 hardware address 352 host virtual adapter 328 host virtual network mapping 340 host only 332 472 host only subnet 347 identity clone 295 P forwarding 351 P packet leaks 350 351 ing out access to settings 457 C address 352 T 330 365 473 T as firewall 373 T device 328 T subnet 347 packet filtering 351 performance 300 promiscuous mode on a Linux host 364 routing between two host only net works 360 routing on a Linux host 354 Samba 378 second bridged network on a Linux host 356 switch 327 Token Ring 331 troubleshooting DHCP on a Linux host 355 two host only networks 357 virtual DHCP server 331 332 virtual Ethernet adapter 328 virtual network editor 338 343 348 476 virtual switch 327 etwork address translation defined 473 See NAT ew clone 292 team 301 SSA gt gt gt ew team Wizard adding LAN segment 303 ew team wizard creating clone 303 483 New Virtual Machine Wizard 115 210 473 NFS specifying connection from port below 1024 372 Novell NetWare supported guest operating systems 40 VMware Tools for 147 NT4 Ethernet adapter 135 NVRAM 108 o Operat
116. 5 using 176 viewing 180 Shared Folders tab in tools 152 Shortcut does not work in shared folder 180 Shortcuts keyboard 107 Shrink tab in tools 152 unsupported and disabled parti tions 218 virtual disks 152 153 160 215 234 Shut down a virtual machine 162 Size disk 210 212 224 260 virtual disk 35 123 virtual machine window 170 Sleep ACPI 470 SMP see Virtual SMP Snapshot defined 474 disabling 287 disabling menu functions 459 files 110 Go To 285 linked clone 296 parent 285 removing 286 revert 285 team 309 using 164 virtual machine 273 ways of using 276 what is saved in 277 Snapshots disabling 287 Solaris supported 32 bit guest operating systems 40 www vmware com supported 64 bit guest operating systems 40 Sound configuring 389 drivers for Windows 9x and Win dows NT guest operating systems 389 Sound Blaster 389 support in guest 36 Specifications virtual machine platform 34 Start suspended virtual machine 161 272 virtual machine 159 VMware Tools 160 Static IP 362 366 clone 295 Status bar hide 172 Subnet changing settings 341 in NAT configuration 347 on host only network 347 Sun Solaris supported 32 bit guest operating systems 40 supported 64 bit guest operating systems 40 Support experimental 43 technical support resources 41 Suspend defined 475 files 110 team 311 virtual machine 161 272 SVGA in a Windows 95 guest on a physical disk 252 in a Windows 98 guest on a
117. 6 Running VMware Workstation Cutting Copying and Pasting Text When VMware Tools is running you can cut or copy and paste text between applications in the virtual machine and the host computer or between two virtual machines Use the normal hot keys or menu choices to cut copy and paste To turn off this feature to prevent accidental copying and pasting from one environment to another change your preferences Choose Edit gt Preferences On the Input tab clear the check box beside Enable copy and paste to and from virtual machine 175 VMware Workstation 5 User s Manual Using Shared Folders With shared folders you can easily share files among virtual machines and the host computer To use shared folders you must have the current version of VMware Tools installed in the guest operating system and you must configure your virtual machine settings to specify which directories are to be shared VMware Workstation 5 includes new performance enhancements for shared folders You can use shared folders with virtual machines running the following guest operating systems Windows Server 2003 Windows XP Windows 2000 Windows NT 4 0 Linux with a kernel version of 2 4 or higher To set up one or more shared folders for a virtual machine be sure the virtual machine is open in Workstation and click its tab to make it the active virtual machine Choose VM gt Settings gt Options and click Shared folders Virtual Machin
118. 6 x loading parport_pc does not load all three modules If none of the listed parallel port modules is running use this command modprobe parport_pc amp amp modprobe ppdev This command inserts the three modules needed for a parallel port If you continue to see problems it is possible that the 1p module is running If it is the virtual machine cannot use the parallel port correctly To remove the 1p module run this command as the root user rmmod lp You should also ensure that the line referring to the 1p module in the etc modules conf or etc conf modules file is removed or commented out by inserting a hash character at the beginning of the line The name of the configuration file depends on the Linux distribution you are using When you reboot the host after removing this line the configuration file no longer starts the 1p module To ensure that the proper modules for the parallel port are loaded at boot time add this line to the etc modules conf or etc conf modules file alias parport_lowlevel parport_pc Linux kernels in the 2 6 x series also use a special arbitrator that allows access to the parallel port hardware If the parallel port is in use by the host the guest cannot use it If a virtual machine is using the parallel port the host and any users accessing the host are not given access to the device VMware Workstation puts a lock on the device and this lock restricts access so only the virtual machine can us
119. 98 guests 449 Performance monitoring 441 Physical disk configuring virtual machine on dual boot computer 237 using in a virtual machine 212 www ymware com Ping 367 Pipe named 400 401 402 Port TCP and UDP below 1024 372 Port forwarding 371 376 377 Power menu disable functions 459 Power Off revert to snapshot 285 288 team 310 Power On team 310 Preferences hot keys 89 memory 91 process priority 92 setting for Workstation 87 Priorities for virtual machines on Windows host 92 Process scheduler 92 Processor host requirement 30 provided in virtual machine 34 Promiscuous mode 364 Q Quick switch mode 169 474 R RAM amount required on host 31 available in virtual machine 34 Raw disk see Disks physical Real Media 389 Real time clock requirement on Linux host 55 Reclaim disk space 152 153 Redo log file 109 197 199 202 Registration 43 Registry 134 Restore suspended virtual machine 161 Restricted user interface 459 Resume defined 474 team 311 virtual machine 161 272 Revert at power off 285 288 snapshot 285 Routing between two host only networks 360 for a host only network on a Linux host 354 host only 354 Run suspended virtual machine 272 S S1 470 Samba and file sharing on a Linux host 378 modifying configuration for Work station 378 on both bridged and host only net works 378 Save state of virtual machine 161 164 272 273 Scan code 409 Scanner 422 Screen colors
120. Asroot su mount the VMware Tools virtual CD ROM image change to a working directory for example tmp uncompress the installer then unmount the CD ROM image Note Some Linux distributions automatically mount CD ROMs If your distribution uses automounting do not use the mount and umount commands below You still must untar the VMware Tools installer to tmp Some Linux distributions use different device names or organize the dev directory differently If your CD ROM drive is not dev cdrom or if the mount point for a CD ROM is not mnt cdrom you must modify the following commands to reflect the conventions used by your distribution mount dev cdrom mnt cdrom cd tmp Note If you have a previous installation delete the previous vmware distrib directory before installing The default location of this directory is tmp vmware tools distrib 1 44 www vmware com CHAPTER 5 Creating a New Virtual Machine 4 Atthe command prompt enter rpm Uhv mnt cdrom VMwareTools 5 0 0 lt XXXX gt 1386 rpm umount dev cdrom Where lt xxxx gt _ is the build revision number of the VMware Workstation release Note If you attempt to installan rpm installation overa tar installation or the reverse the installer detects the previous installation and must convert the installer database format before continuing 5 Configure VMware Tools vmware config tools pl Respond to the questions the installer displays o
121. CNet Family Adapters within the guest Configure the Ethernet adapters as you would physical adapters on a physical computer giving each an IP address on the appropriate VMnet subnet On Windows hosts you can open a command prompt and run ipconfig allto see what IP addresses each host only network is using On Linux hosts you can open a terminal and run ifconfig to see what IP addresses each host only network is using Routing between Two Host Only Networks If you are setting up a complex test network using virtual machines you may want to have two independent host only networks with a router between them There are two basic approaches In one the router software runs on the host computer In the other the router software runs in its own virtual machine In both cases you need two host only interfaces The examples described here outline the simplest case with one virtual machine on each of the host only networks For more complex configurations you can add more virtual machines and host only networks as appropriate Setting Up the First Host Only Interface On Windows hosts the first host only network is set up automatically when you install VMware Workstation On Linux hosts the first host only network was set up when you ran the vmware config pl program after you installed VMware Workstation provided you agreed to install host only networking If you did not agree to use host only networking you need to run the prog
122. Choose VM gt Settings 2 Select Options 3 Click Shared Folders 4 Click Add to open the Shared Folder Properties dialog box J Shared Folder Properties x Name Host Folder Browse Additional Attributes F Enable this share I Read only T Disable after this session Disable the share the next time the virtual machine is powered off or suspended Hep x caca y ok c 5 Enter the following information for the shared folder e Name This is the name that appears inside the virtual machine e Host folder The path on the host to the directory you want to share Type in the full path or browse to the directory e Enable this share Select this option to enable the shared folder Deselect this option to disable the shared folder without deleting it from the virtual machine configuration You may want to add a folder to the list without enabling it immediately You can then enable the folder at any time by clicking its name in this list clicking Properties and enabling the folder in the Properties dialog box e Read only Select this option to prevent the virtual machine from changing the contents of the shared folder in the host file system Access to files in the shared folder is also governed by permission settings on the host computer e Disable after this session Select this option to disable the virtual machine s connection to the folder when the virtual machine is powered off or suspend
123. Configuring Teams Working with Team Networks One of the special advantages of teams is the ability to isolate virtual machines in private virtual networks called LAN segments This can be useful with multitier testing network performance analysis and situations where isolation and packet loss are important LAN Segment Requirements The following sections describe the requirements for virtual machines connecting to a LAN segment Network Adapter A physical PC must have a network adapter for each physical network connection Similarly a virtual machine must be configured with a virtual network adapter for each LAN segment it interacts with To connect a virtual machine to multiple LAN segments simultaneously you must configure that virtual machine with multiple network adapters LAN Segment IP Addresses Each network client must have an IP address for TCP IP networking Unlike host only and NAT networking LAN segments have no DHCP server provided automatically by VMware Workstation Therefore you must manually configure IP addressing for team virtual machines on a LAN segment There are two choices e DHCP Configure a DHCP server on your LAN segment to allocate IP addresses to your virtual machines e Static IP Configure a fixed IP address for each virtual machine on the LAN segment Note When you add an existing virtual machine to a team the virtual machine may be configured to expect an IP address from a DHCP server
124. D Windows XP Pro SP2 P e LinkedClone ay alt B MM ND 378 amp Clone of vmaz0sb 2 e108 e18 alt Intel EE Pro 188 IBM ED WinxPPro7 e180887e1889a lt PowerEdge 1688SC IBM T48 T41 T41p and run FDISK MBR PR378 fix You do not have VMware Tools installed VMware Workstation detects a PXE server on boot www ymware com CHAPTER 5 Creating a New Virtual Machine Power on the virtual machine to start installing Windows XP ST Windows XP Professional VMware Workstation Fie Edt View VM Team Windows Help s upe canan Longhorn experimental E Windows 2000 Professional 3 GD Windows xP Home Edition Welcome to Setup GD Windows XP Professional GQ Windows XP Pro SP1 GR Windows XP Pro SP2 883 Client Server ES Stier Private Network E vmo11708 E Windows XP Pro SP2 LinkedClone B Clone of vm0209b 2 I oO 3m Follow the Windows XP installation steps as you would for a physical computer S Windows XP Professional VMware Workstation File Edt View VM Team Windows Help z up C amp R Aa p Favorites x Windows B Longhorn experimental g Windows BD Windows 2000 Professional 3 B Windows XP Home Edition fe Collecting GQ Windows XP Pro SP1 information GQ Windows XP Pro SP2 Dynamic Update Preparing installation Finalizing installation lated taskbar items Windows XP Setup will complete in grams and to open approximately 39 minutes When the installer
125. DHCP assigned 192 168 0 128 192 168 0 253 lt net gt 254 DHCP server 192 168 0 254 lt net gt 255 Broadcasting 192 168 0 255 Address Use on a NAT Network Range Address use Example lt net gt 1 Host machine 92 168 0 1 lt net gt 2 NAT device 92 168 0 2 lt net gt 3 lt net gt 127 Static addresses 92 68 0 3 192 168 0 127 lt net gt 128 lt net gt 253 DHCP assigned 92 168 0 128 192 168 0 253 lt net gt 254 DHCP server 92 168 0 254 lt net gt 255 Broadcasting 92 168 0 255 349 VMware Workstation 5 User s Manual 350 Avoiding IP Packet Leakage in a Host Only Network By design each host only network should be confined to the host machine on which it is set up That is no packets sent by virtual machines on this network should leak out to a physical network attached to the host Packet leakage can occur only if a machine actively forwards packets It is possible for the host machine or any virtual machine running on the host only network to be configured in a way that permits packet leakage Windows Hosts Systems using server versions of Windows 2000 are capable of forwarding IP packets that are not addressed to them By default however these systems come with IP packet forwarding disabled IP forwarding is not an issue on Windows 2000 Professional Windows XP Professional or Windows XP Home Edition hosts If you find packets leaking out of a host only net
126. DMA feature after you finish installing Windows NT You must install Service Pack 6a Download DMACHECK EXE from the Microsoft Web site support microsoft com support kb articles Q191 7 74 ASP and run it Click the Enabled option for the IDE controller and channel configured for the virtual disk Typically this is channel 0 only unless you have the virtual machine configured with multiple virtual disks and no virtual DVD CD ROM drive As noted above you should not enable DMA on an IDE channel with a virtual DVD CD ROM drive attached Linux Guest Operating System Performance Tips This section offers advice for configuring a Linux guest operating system for better performance inside a VMware Workstation virtual machine Note This document pertains to the guest operating system that is running inside a VMware Workstation virtual machine It does not describe actions that should be taken on Linux running on the host Guest Operating System Selection Make certain you have selected the correct guest operating system in the virtual machine settings editor VM gt Settings gt Options VMware Tools Make certain VMware Tools is installed VMware Tools provides an optimized SVGA driver and sets up the VMware Tools service to run automatically when the system www vmware com CHAPTER 15 Performance Tuning starts Among other things the VMware Tools service allows you to synchronize the virtual machine s clock with the host compute
127. Defragmenting Virtual Disks Shrinking Virtual Disks Adding Drives to a Virtual Machine Adding a New Virtual Disk to a Vir Adding Physica Adding DVD or C Disks to a Virtual Adding Floppy Drives to a Virtual Connecting a CD ROM or Floppy Using VMware Virtual Disk Manager Running the VI ware Virtual Disk Shrinking Virtua Using the Same Disks with VMware Virtual Disk Manager Examples Using the VMware Virtua Configuring a Dual Boot Computer fo Operating System in a Virtual Machine and on the Host D Drives to a Virtu D ual Machine achine al Machine achine rive to an Image File Disk Manager anager Utility Use with a Virtual Machine Computer Before You Begin Configuring Dual or Setting Up Hardware P achine from an Existi Setting Up the SVGA Vi Booted from a Physical Disk Setting Up the SVGA Vi System Booted from a Physical Disk Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks Configuring Dual or Multiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host nown Issues and Background Information on Using SCSI Physical Disks ultiple Boot Systems to Run with Workstation___ rofiles in Virtual Machines Running a Windows 2000 Windows XP or Windows Server 2003 Virtual ng Multiple Boot Installation N So Ke MOR MoN M N N O nO Aan t w WO
128. Do not install VMware Workstation on a network drive Note Windows and the Microsoft Installer limit the length of a path to a folder on a local drive to 255 characters For a path to a folder on a mapped or shared drive the limit is 240 characters If the path to the VMware Workstation program folder exceeds this limit an error message appears You must select or enter a shorter path 49 VMware Workstation 5 User s Manual 50 6 8 Select the shortcuts that you want the installer to create if VMware Workstation Configure Shortcuts creates moa Create shortcuts For VMware Workstation in the Following places F Desktop JZ Start Menu Programs folder Quick Launch toolbar Choices include Desktop Start menu and Quick Launch toolbar Deselect any shortcuts you do not want the installer to create If the installer detects that the Windows CD ROM autorun feature is enabled you see a message that gives you the option to disable this feature Disabling autorun prevents undesirable interactions with the virtual machines you install on this system The installer has gathered the necessary information and is ready to begin installing the software i VMware Workstation Ready to Install the The wizard is ready to Click Install to begin the installation If you want to review or change any of your installation settings click Back Click Cancel to exit the wizard If you want to change any sett
129. ER 1 Introduction and System Requirements e Red Hat Linux 8 0 stock 2 4 18 e Red Hat Linux 7 3 stock 2 4 18 e Red Hat Linux 7 2 stock 2 4 7 10 upgrade 2 4 9 7 upgrade 2 4 9 13 upgrade 24 9 21 upgrade 2 4 9 31 e SUSE Linux Pro 9 3 stock 9 3 2 6 11 4 32 bit 64 bit USE Linux 9 2 stock 9 2 2 6 8 24 11 USE Linux 9 1 stock 2 6 4 52 USE Linux 9 0 stock 2 4 21 99 USE Linux 10 stock 2 6 13 64 bit 32 bit xperimental support for SUSE Linux Enterprise Server 9 SP3 beta SE Linux Enterprise Server 9 0 stock 2 6 5 797 32 bit 64 bit SP1 listed rsions also supported with no service pack D USE Linux Enterprise Server 8 stock 2 4 19 64 bit USE Linux 8 2 stock 2 4 20 USE Linux 8 1 stock 2 4 19 USE Linux 8 0 stock 2 4 18 USE Linux 7 3 stock 2 4 10 e NDAnNnn nn fcnmnHnnn wn t e Novell Linux Desktop 9 SP2 beta e Experimental support for Ubuntu Linux 5 10 32 bit 64 bit e Experimental support for Ubuntu Linux 5 04 32 bit 64 bit Platforms not listed above are not supported A Web browser is required for the Help system 33 VMware Workstation 5 User s Manual 34 Virtual Machine Specifications Each virtual machine created with VMware Workstation 5 provides a platform that includes the following devices that your guest operating system can see Processor e Same processor as that on host computer e One virtual proce
130. Free86 server or not a local server VMware Workstation must map keysyms to v scan codes using a set of keyboard specific ables ey code mapping is simple automatic and foolproof Keysym mapping is more complex and described later However because the program cannot tell whether a remote server is running on a PC or on some other kind of computer it errs on the safe side and uses key code mapping only with local X servers This is often too conservative and has undesirable effects Luckily this and other behavior related to key code mapping can be controlled by powering off the virtual machine and closing the VMware Workstation window then using a text editor to add configuration settings to the virtual machine s configuration file e xkeymap usekeycodeMapIfXFree86 true Use key code mapping if you are using an XFree86 server even if it is remote e xkeymap usekeycodeMap true Always use key code mapping regardless of server type 41 0 www vmware com CHAPTER 14 Connecting Devices e xkeymap nokeycodeMap true Never use key code mapping e xkeymap keycode lt code gt lt v scan code gt If using key code mapping map key code lt code gt to lt v scan code gt n this example lt code gt must be a decimal number and lt v scan code gt should be a C syntax hexadecimal number for example 0x001 The easiest way to find the X key code for a key is to run xev orxmodmap pk Most of the v scan codes are
131. GB option calls for recompiling your kernel as a 2GB kernel You do this by recompiling your kernel with CONFIG_2GB enabled This allows Linux to support nearly 2GB of physical memory by dividing the address space into a 2GB user section and a 2GB kernel section a for kernel s opposed to the normal division of 3GB for user and 1GB The third approach uses the CONFIG_BIGMEM option in Linux With the CONFIG_BIGMEM option enabled the kernel does not directly address all of physical memory and it can then map 1GB or 2GB of physical memory into the address space at a time This allows the us e of all of physical memory at the cost of changing the semantics the kernel uses to map virtual to physical addresses However VMware products expect physical memory to be mapped directly in the kernel s address space and thus do not work properly with the CONFIG_BIGMEM option enabled Workarounds If you are using a 1GB kernel with CONFIG_BIGMEM enabled and have 960MB to 1983MB of memory VMware Workstation does not run To work around this issue you can either e Recompile the kernel as a 2GB kernel by enabling the CONFIG_2GB option This allows for 100 percent use of physical memory e Pass the boot time switch mem 95 9M at the LILO prompt or add it to 1ilo conf to disable CONFIG_BIGMEM and thus allow you to run VMware Workstation To do thi S e Atthe LILO prompt type linux 2 2 16xxx mem 959M
132. Hardware Most migrated applications should function correctly in the VMware virtual machine because their configuration and data files have the same location as the source virtual machine However applications might not work if they depend on the specific characteristics of the underlying hardware such as the serial number or the device manufacturer When troubleshooting after migration keep in mind the following hardware changes e The CPU model and serial number if activated may be different after the migration They correspond to the physical computer hosting the VMware virtual machine e The Ethernet adapter is different AMD PCNet or VMXnet with a different MAC address Each interface s IP address has to be individually reconfigured e The graphics card is different VMware SVGA card e The number of disks and partitions is the same but each disk device has a different model and different manufacturer strings e The primary disk controllers are likely to be different from the source machine s e Applications may not work if they depend on devices that are not available from within a virtual machine www vmware com CHAPTER 5 Creating a New Virtual Machine Importer Fails to Import Virtual Machine or System Image with More Than Six PCI Devices The importer supports migration of only six PCI devices If you have a virtual machine or system image with more than six PCI devices the importer do
133. I gives the guest operating system direct access to SCSI devices connected to the host such as scanners and tape drives Generic SCSI on a Windows Host Operating System Using the SCSI Generic driver in Windows VMware Workstation allows your guest operating system to operate generic SCSI devices including scanners tape drives and other data storage devices in a virtual machine Note In order to access host SCSI devices as Generic SCSI devices from within a virtual machine you must run VMware Workstation as a user with administrator access Device Support In theory generic SCSI is completely device independent but VMware has discovered it is sensitive to the guest operating system device class and specific SCSI hardware We encourage you to try any SCSI hardware you want to use and report problems to VMware technical support Note If you are using generic SCSI devices in a Windows 95 Windows 98 or Windows Me guest operating system and are experiencing problems with the devices download the latest Mylex BusLogic BT KT 958 compatible host bus adapter from www Isilogic com This driver overrides what Windows chooses as the best driver but it corrects known problems Preparing a Windows XP or Windows Server 2003 Guest Operating System to Use SCSI Devices To use SCSI devices in a Windows XP or Windows Server 2003 virtual machine you need a special SCSI driver available from the download section of the VMware Web site www
134. ID for a Virtual Machine that Is Being Moved f you plan to move a virtual machine and want it to have the same UUID it did before the move you must note the UUID being used before the move and add that UUID to the configuration file after the move Follow these steps 1 Before moving the virtual machine examine its configuration file You need to use a text editor The configuration file is located in your virtual machine s directory the file has a vmx extension 2 If the virtual machine s UUID has been set to a specific value the configuration file has a line that begins with uuid bios Note the 128 bit hexadecimal value that follows This is the value you should use in the new location 3 If there is no line beginning with wuid bios look for the line that begins with uuid location and note the 128 bit hexadecimal value that follows it 4 Move the virtual machine s files to the new location 5 Start the virtual machine then shut it down 6 Edit the virtual machine s configuration file to add a uuid bios line as described in Specifying a UUID for a Virtual Machine on page 190 Set the value of uuid bios to the value you recorded in step 2 7 Start the virtual machine It should now have the same UUID as it did before the move www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Moving a VMware Workstation 5 Virtual Machine What do you do if you have created a virtual machine using VMware Workstatio
135. Input grabbed normal D Power Shared Folders Enabled Input ungrabbed nomal 4 Snapshots Disabled These settings override the global values specified in E Guest Isolation Enabled Enabled Edit gt Preferences gt Priority IE Advanced Settings C Disable acceleration C Disable memory page trimming C Log virtual machine progress periodically Enable Template mode to be used for cloning File locations Configuration C 000_yms TechPubsToolkVM Frem Log C 000_vms TechPubsT ooleVM Fram Process priorities Windows only VMware Workstation sets the default priority for virtual machine processing as Normal for both Input grabbed and Input ungrabbed This means that the processes within virtual machines contend equally for resources with all other processes running on the host To change the default priority for the selected virtual machine overriding the global priorities choose the priority you want then click OK You can also set the global priorities directly from a Workstation window by choosing Edit gt Preferences and clicking the Priority tab Settings e Run with debugging information You can run a virtual machine so it collects additional debugging information that is helpful to VMware technical support in resolving issues To turn debugging mode on select Run with debugging information then click OK to apply your changes e Disable acceleration In rare instances you ma
136. Linked Clone Snapshot When you create a linked clone Workstation 5 creates a snapshot of the parent virtual machine This snapshot preserves the exact state of the virtual machine when you create the clone Caution You cannot delete this snapshot without destroying the linked clone It is safe to delete this snapshot if you have deleted the clone depending on it The snapshot manager allows you to rename any snapshot If you rename a snapshot for a cloned virtual machine you may want to use the Description field to aid you in future identification Refer to The Snapshot Manager on page 280 for more information on renaming snapshots Linked Clones and Access to the Parent Virtual Machine You cannot power on or resume a linked clone if Workstation fails to locate the parent virtual machine This section discusses the following topics e Moving a Linked Clone on page 296 e Protecting the Parent of Linked Clones on page 297 Moving a Linked Clone You can move a linked clone or its parent within a file system or network but you must ensure VMware Workstation can continue to access the clone and the parent virtual machine For example place the parent in a shared directory or on a network file server so Workstation can use the linked clone from any host computer with network access See Moving and Sharing Virtual Machines on page 187 for a discussion of moving virtual machines Example Using a Linked Clone on a Disconnecte
137. M MAC address 290 assigning manually 353 clone 295 of virtual Ethernet adapter 352 Map key code 411 keyboard 409 keysym 412 Memory amount required on host 31 available in virtual machine 34 choosing for best performance 435 more than 1GB on a Linux host 447 reserved memory 445 setting size 443 swapping 91 virtual machine memory size 443 emory trimming Disk performance 454 IDI 389 igrate disks in undoable mode 201 virtual machine 67 198 ode full screen 168 472 quick switch 169 474 odifier keys for full screen switch mode 464 ouse sending input to virtual machine 89 USB 421 ove virtual machine 187 ovie capture 183 CODEC 184 playback 184 MP3 389 MS DOS supported guest operating systems 38 www ymware com Multi tier team 300 Mylex 35 121 257 422 427 N Name changing LAN segment name 321 changing team name 322 changing virtual machine name 95 Named pipe 400 401 402 NAT advanced configuration 368 and DHCP 366 and DNS 367 and the host computer 366 defined 473 external access from a NAT network 367 on virtual network 330 365 port forwarding 371 376 377 sample configuration file for Linux host 375 selecting IP addresses 347 specifying connection from port below 1024 372 virtual device 328 when creating a virtual machine 120 NAT conf 369 375 NetLogon 373 NetWare See Novell NetWare Network adding and modifying virtual Ether net adapters 336 automatic bridging 338 bridge 3
138. M gt Removable Devices menu to disconnect it and reconnect it 2 If you see a dialog box warning that the device is in use disable it in the hotplug configuration files inthe etc hotplug directory Disconnecting USB Devices from a Virtual Machine Before unplugging a USB device or using the VM gt Removable Devices menu to disconnect it from a virtual machine be sure it is in a safe state You should follow the procedures the device manufacturer specifies for unplugging the device from a physical computer This is true whether you are physically unplugging it moving it from host to virtual machine moving it between virtual machines or moving it from virtual machine to host T move a data storage device too soon after saving a file and the operating system has not actually written the data to the disk you can lose data gt is is particularly important with data storage devices a Zip drive for example If you Human Interface Devices USB human interface devices such as the keyboard and mouse are not handled hough the virtual machine s USB controller Instead they appear in the virtual machine as a standard PS 2 keyboard and mouse even though they are plugged into USB ports on the host 421 VMware Workstation 5 User s Manual 422 Connecting to a Generic SCSI Device Generic SCSI lets a virtual machine run any SCSI device that is supported by the guest operating system in the virtual machine Generic SCS
139. Mnet2 Use the virtual machine settings editor to add a second virtual network adapter Connect the adapter to Custom VMnet3 Click OK to save the configuration and close the virtual machine settings editor If VMware Workstation is not running start it Open virtual machine 4 Do not power on the virtual machine Use the virtual machine settings editor VM gt Settings to add a virtual network adapter Connect the adapter to Custom VMnet3 Click OK to save the configuration and close the virtual machine settings editor www vmware com 6 9 CHAPTER 12 Configuring a Virtual Network Determine the network addresses used for VMnet2 and VMnet3 Note On a Windows host you may skip the steps for configuring network addresses manually and instead use Workstation s DHCP server Go to Edit gt Virtual Network Settings gt DHCP and add VMnet2 and VMnet3 to the list of virtual networks served by the virtual DHCP server Then skip to step 9 On a Windows host open a command prompt on the host computer and run ipconfig all Note the network addresses used by each virtual adapter On a Linux host run ifconfig at the console or in a terminal window on the host computer Note the network addresses used by each virtual switch Start VMware Workstation open each virtual machine in turn and install the appropriate guest operating system Configure the networking in each guest operating system For the bridged Ethe
140. Mware on the Web gt Register Now and Help gt VMware on the Web gt Request Support This allows us to direct you to the correct Web page to register and get support for your product 3 Start the New Virtual Machine Wizard When you start VMware Workstation you can open an existing virtual machine or create a new one Choose File gt New gt Virtual Machine to begin creating your virtual machine 4 The New Virtual Machine Wizard presents you with a series of screens that you navigate using the Next and Prev buttons at the bottom of each screen At each screen follow the instructions then click Next to proceed to the next screen New Virtual Machine Wizard Welcome to the New Virtual Machine Wizard This wizard wil guide you through the steps of creating a new vitual machine 115 VMware Workstation 5 User s Manual 5 Select the method you want to use for configuring your virtual machine New Virtual Machine Wizard Select the Appropriate Configuration How would you prefer to configure your new virtual machine Virtual machine configuration ODpical Create a new virtual machine with the mast common devices and configuration options Choose this option if you need to create a vitual machine with additional devices or specific configuration options or if you need to create a legacy virtual machine If you select Typical the wizard prompts you to specify or accept defaults for the following choices
141. Name Host folder Staus D Power VMware C WMshare Enabled O Shared Folders Enabled Documents C doc Enabled Shared folders Snapshots Bi Guest isolation Drag and drop enabled E Advanced Normal Normal Template C Disable Shared Folders Cancel Help Shared Folders This option allows a virtual machine to share a folder with the host file system for convenient file transfers See Using Shared Folders on page 176 for help configuring this option Snapshots Virtual Machine Settings Hardware Options Settings Summary General E General Windows XP Pro SP2 sle snapshot To disable the snapshot feature this vitual machine D Power Enabled must not currently have a snapshot When powering off Just power off O Revert to snapshot Drag and drop enabled Normal Normal Template O Take a new snapshot O Ask me General You can disable snapshots for the virtual machine The virtual machine must not have any snapshots if you want to disable snapshots To disable snapshots for this virtual machine select Disable snapshots When powering off You can specify the way Workstation handles snapshots when you power off the virtual machine Options when powering off include e Just power off powers off without making any changes to snapshots e Revert to the snapshot reverts to the parent snapshot of the virtual machine s current state that is the parent snapshot of the You
142. NetWare servers do not idle the CPU when the operating system is idle As a result a virtual machine takes CPU time from the host regardless of whether the NetWare server software is idle or busy www vmware com 154 Where to Go Next e Running VMware Workstation on page 157 e Using Disks on page 209 e Moving and Sharing Virtual Machines on page 187 e Preservin g the State of a Virtual Machine on page 271 e Cloning a Virtual Machine on page 289 e Configuri e Configuri e Configuri ng Teams on page 299 ng a Virtual Network on page 325 ng Video and Sound on page 379 e Connecti e Performa ng Devices on page 391 nce Tuning on page 431 CHAPTER 5 Creating a New Virtual Machine 155 VMware Workstation 5 User s Manual 1 56 www vmware com CHAPTER Running VMware Workstation This chapter discusses launching the VMware Workstation program and various tasks you may want to perform in daily use after you have installed VMware Workstation a guest operating system and V Starting a Virtual Checking the Statu achine s of V ware Tools on page 159 ware Tools on page 160 Suspending and Resuming Virtual Machines on page 161 Shutting Down a V Resetting a Virtual irtual achine on page 162 achine on page 163 Taking and Reverting to a Snapshot on page 164 Cloning a Virtual achine on page 165 Deleting a Virtual Machine on page 166 Usi
143. O N N Ww 226 228 229 230 231 234 235 237 252 deo Driver for a Windows 95 Guest Operating System 252 deo Driver for Use with a Windows 98 Guest Operating 254 256 257 260 Installing an Operating System on a Physical Partition from a Virtual Machine 263 Configuring a Windows Host Configuring a Linux Host 264 266 Legacy Virtual Disks Upgrading a Legacy Virtual Machine for New Features of Workstation 5 _ Using a Legacy Virtual Machine without Upgrading Creating a Legacy Virtual Machine with Workstation 5 Preserving the State of a Virtual Machine Using Suspend and Resume Using Snapshots Understanding Snapshots Examples of Using Snapshots What Is Captured by a Snapshot Taking a Snapshot The Snapshot Manager Restoring a Snapshot Revert or Go To Deleting Snapshots Making a Clone from a Snapshot Virtual Machine Settings for Snapshots Snapshots and Legacy Virtual Machines Cloning a Virtual Machine Understanding Clones Why Make a Clone Full and Linked Clones Full Clones and Snapshots of the Parent Creating Clones The Clone Virtual Machine Wizard Working with Clones Making a Linked Clone of a Linked Clone Making a Full Clone of a Linked Clone Network Identity for a Clone The Linked Clone Snapshot Linked Clones and Access to the Parent Virtual Machine Con
144. O for running Linux in a virtual machine If the amount of memory configured in Lilo conf exceeds the amount of memory assigned to the virtual machine then when the virtual machine tries to boot the second Linux installation the guest operating system will most likely panic You can create another entry in Lilo con for running Linux in a virtual machine by specifying a different amount of memory than what would normally be recognized when Linux boots directly on the physical machine 6 To configure a virtual machine to run from a physical disk partition start the New Virtual Machine Wizard File gt New gt Virtual Machine and select Custom 7 When you reach the Select a Disk step select Use a physical disk 245 VMware Workstation 5 User s Manual 246 8 Complete the wizard steps specifying the appropriate disk or partition to use for this virtual machine Caution Corruption is possible if you allow the virtual machine to modify a partition that is simultaneously mounted under Linux Since the virtual machine and guest operating system access an existing partition while the host continues to run Linux it is critical that the virtual machine not be allowed to modify any partition mounted under Linux or in use by another virtual machine To safeguard against this problem be sure the partition you use in the virtual machine is not mounted under the Linux host Complete the remaining steps in the wizard If
145. P in virtual machine 120 IP on virtual network 347 MAC 352 network address translation 365 using DHCP to assign on a virtual network 347 Administrative lockout 457 AMD Athlon 24 30 Opteron 24 30 Sempron 24 30 Turion 24 30 AMD Athlon 64 processor supported for 64 bit guest 37 AMD Opteron processor supported for 64 bit guest 37 AMD Sempron processor supported for 64 bit guest 37 AMD Turion processor supported for 64 bit guest 37 Assign drive letter 243 IP address 347 MAC address 352 network port number in NAT 371 Athlon 24 30 Athlon 64 processor supported for 64 bit guest 37 Audio See Sound Audio controller 135 AudioPCl 389 Autofit 170 guest 170 autofit window 170 Automatic bridging 338 Autorun disable 50 B Bandwidth LAN segment 303 bandwidth LAN segment 321 Basic disks on Windows host 256 BIOS file in virtual machine 108 477 478 provided in virtual machine 34 Boot loader LILO 242 245 258 Boot sequence in VMware BIOS 243 246 Bridge 327 Bridged networking configuring options 338 defined 471 Browser configuring on Linux host 58 BSD supported 32 bit guest operating systems 40 supported 64 bit guest operating systems 40 BT 958 121 257 BusLogic 35 121 257 422 427 C Capacity disk 210 212 224 260 Capture screenshot 183 CD adding drive to virtual machine 226 CD ROM image file 35 Celeron 30 Centrino 30 Change team name 322 virtual machine name 95 Cl
146. Profiles tab or click the Hardware tab then click Hardware Profiles depending on the operating system Click the Copy button and name the copies appropriately 2 Windows NT only While still running the operating system natively use the Device Manager to disable some devices from the Virtual Machine hardware profile To do this open Control Panel gt Devices then select the individual devices to disable Devices to disable in the Virtual Machine hardware profile include audio MIDI and joystick devices Ethernet and other network devices and USB devices Remember to disable them in the Virtual Machine hardware profile only Skip this step if you are running Windows 95 Windows 98 Windows Me Windows 2000 Windows XP or Windows Server 2003 The initial Plug and Play phase detects device mismatches 3 Reboot the computer into your intended host operating system for example into Linux if you are running VMware Workstation on a Linux host 4 Use the New Virtual Machine Wizard to configure your virtual machine as described in Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 249 VMware Workstation 5 User s Manual 250 5 Boot the virtual machine and use your existing boot manager to select the guest operating system Choose Virtual Machine at the hardware profile menu prompt You encounter device failure messages and delays during this initial boot Windows Server 2003 Windows XP and
147. Setting up networking components for your custom virtual network is a straightforward process Before attempting to set up complex virtual networks you should have a good understanding of how to configure network devices in your host and guest operating systems The sample configuration described in this section illustrates many of the ways you can combine devices on a virtual network Other custom configurations are described in Advanced Networking Topics on page 346 and Understanding NAT on page 365 Host s Ethernet Virtual adapter Ethernet switch VMnet0 DEBE BEEBE Virtual bridge Virtual Virtual Ethernet Ethernet adapter adapter Virtual Ethernet adapter cee 8 oe 7 Virtual machine 1 Virtual Ethernet switch Firewall Virtual machine 2 VMnet2 Web server Virtual Virtual Ethernet Ethernet adapter adapter Virtual EnS E E E ERED Ethernet Virtual adapter Ethernet switch VMnet3 Virtual machine 3 Firewall Virtual machine 4 Internal PC In this custom configuration a Web server connects through a firewall to an external network An administrator s computer can connect to the Web server through a second firewall 333 VMware Workstation 5 User s Manual 334 To set up this configuration you must create four virtual machines and use the virtual machine settings editor to adjust the settings for their virtual Ethernet adapters You also need t
148. Support Resources The following sections describe various technical support resources available to you e Self Service Support Online and Telephone Support e Support Offerings e Reporting Problems e Experimental Support Self Service Support Use the VMware Technology Network for self help tools and technical information e Product Information www vmware com support resources e Technology Information www vmware com vcommunity technology e Documentation www vmware com support pubs e Knowledge Base www vmware com support kb e Discussion Forums www vmware com community e User Groups www vmware com vcommunity usergroups htm For more information about the VMware Technology Network go to www vmtn net Online and Telephone Support Use online support to submit technical support requests view your product and contract information and register your products Go to www vmware com support Use phone support for the fastest response on priority 1 issues for customers with appropriate support contracts Go to www vmware com support phone_support html Support Offerings Find out how VMware s support offerings can help you meet your business needs Go to www vmware com support services Reporting Problems If you have problems while running VMware Workstation please report them to the VMware support team These guidelines describe the information we need from you to diagnose problems 41 VMware Worksta
149. Tools 40 VMware Tools for Windows Guests 41 VMware Tools for Linux Guests 42 VMware Tools for FreeBSD Guests 146 Installing VMware Tools in a NetWare Virtual Machine 47 VMware Tools Configuration Options 49 Using the Control Panel to Configure VMware Tools 49 Using the System Console to Configure VMware Tools in a NetWare Guest Operating System 53 Where to Go Next 55 Running VMware Workstation 157 Starting a Virtual Machine 159 Virtual Machine Location 59 Checking the Status of VMware Tools 60 Suspending and Resuming Virtual Machines 61 Shutting Down a Virtual Machine 62 Power Off vs Shut Down 62 Resetting a Virtual Machine 63 Reset vs Restart 63 Taking and Reverting to a Snapshot 64 Cloning a Virtual Machine 65 Deleting a Virtual Machine 66 Using Virtual Machine Teams 67 Controlling the Display 168 Using Full Screen Mode 68 Using Quick Switch Mode 69 Taking Advantage of Multiple Monitors 69 Fitting the Workstation Console to the Virtual Machine Display 70 onstandard Resolutions 72 Simplifying the Screen Display 72 Installing New Software 74 Cutting Copying and Pasting Text 75 Using Shared Folders 76 Viewing a Shared Folder 80 Using Drag and Drop 81 Using Devices in a Virtual Machine 82 Adding Configuring and Removing Devices in a Virtual Machine 82 Connecting and Disconnecting Removab
150. Unix socket name of your choice The pipe name must be the same on both server and client Select This end is the client Select The other end is a virtual machine 404 www vmware com CHAPTER 14 Connecting Devices 8 By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 9 Click Finish then click OK to save your configuration and close the virtual machi ne settings editor Special Configuration Options for Advanced Users Two specia virtual mac configuration options are available for serial connections between a hine and the host or between two virtual machines These options are of interest primarily to developers who are using debugging tools that communicate over a seria Improving connection CPU Performance when Debugging The first op tion must be set in the virtual machine settings editor This option is useful when the serial port is being used by the guest operating system in polled mode as opposed to interrupt mode Polled mode causes the virtual machine to consume a disproportionate share of CPU time This makes the host and other guests run
151. VMnet2 At this point you should be able to ping the router machine from virtual machines one and two And if the router software is set up correctly you should be able to communicate between the first and second virtual machines 363 VMware Workstation 5 User s Manual 364 Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host VMware Workstation does not allow the virtual Ethernet adapter to go into promiscuous mode unless the user running VMware Workstation has permission to make that setting This follows the standard Linux practice that only root can put a network interface into promiscuous mode When you install and configure VMware Workstation you must run the installation as root VMware Workstation creates the VMnet devices with root ownership and root group ownership which means that only root has read and write permissions to the devices To set the virtual machine s Ethernet adapter to promiscuous mode you must launch VMware Workstation as root because you must have read and write access to the VMnet device For example if you are using bridged networking you must have access to dev vmnet0 To grant selected other users read and write access to the VMnet device you can create a new group add the appropriate users to the group and grant that group read and write access to the appropriate device You must make these changes on the host operating system as root su For example you can enter th
152. Windows 2000 guests After you log on to Windows Server 2003 Windows XP or Windows 2000 now running as a guest operating system you should see a Found New Hardware dialog box for the video controller as Plug and Play runs and discovers the virtual hardware Do not install drivers at this time Click Cancel to close the Found New Hardware dialog box Do not reboot the virtual machine Click No in the System Settings Change Reboot dialog box Windows Server 2003 Windows XP or Windows 2000 automatically detects and loads the driver for the AMD PCnet PCI Ethernet card At this point you should install VMware Tools inside the virtual machine Allow the virtual machine to reboot after VMware Tools has been installed Once Windows Server 2003 Windows XP or Windows 2000 reboots inside the virtual machine select a new SVGA resolution from the Settings tab of the Display Properties dialog box to increase the size of the virtual machine s display window Windows 95 and Windows 98 guests You should see New Hardware Detected dialog boxes as Plug and Play runs and discovers the virtual hardware Windows prompts you for locations to search for device drivers Most of the device drivers are available in the existing operating system installation but you may need the installation CD ROM for some networking device drivers Windows also asks you to reboot your system several times as it installs the device drivers In some instances Windows may not
153. Workstation 5 Powerful Virtual Machine Software for the Technical Professional User s Manual Kiza EEES ia HUG B OO B Isa L BEEBE BEBSERBRBERBERSER SEE SB LJ IE 2 ce O B i Bees EEES BB EHS B mf ESSIE I Imi EEE i Imi VMware Inc 3145 Porter Drive Palo Alto CA 94304 www vmware com Please note that you can always find the most up to date technical documen tation on our Web site at http www vmware com support The VMware Web site also provides the latest product updates Copyright 1998 2006 VMware Inc All rights reserved Protected by one or more of U S Patent Nos 6 397 242 6 496 847 6 704 925 6 711 672 6 725 289 6 735 601 6 785 886 6 789 156 and 6 795 966 patents pending VMware the VMware boxes logo and design Virtual SMP and VMotion are registered trademarks or trademarks of VMware Inc in the United States and or other jurisdictions Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation Linux is a registered trademark of Linus Torvalds All other marks and names mentioned here
154. a DVD or other removable media large enough to store the files Each virtual machine should be in its own separate directory Setting Configuration Options on the User s Computer Global Configuration Settings Global configuration settings are made in the VMware Workstation global configuration file created by default in the following locations e Windows Host C Documents and Settings All Users Application Data VMware VMware Workstation config ini e Linux Host etc vmware config Note Full screen switch mode is enabled for Windows hosts only This Linux configuration file path is provided for clarity and completeness You can edit this file with a text editor You should set permissions on this file so the user cannot change it Local Configuration Settings Local configuration settings are made in the configuration file for a particular virtual machine The local configuration file is in the virtual machine s directory the filename has a vmx extension The format for an entry in either configuration file is option value Entries in the configuration files can appear in any order The hot key entries described in this section require you to enter a virtual key code as part of the value for an option Virtual key codes are entered in hexadecimal format as a hexadecimal number preceded by Ox For example to use the virtual key code of 5A as a value type Ox5A Microsoft provides a reference list of virtual
155. ach member of the team You can also change network settings from this screen CHAPTER 11 Configuring Teams 319 VMware Workstation 5 User s Manual Virtual Machines To change the start up sequence and delay 1 Choose Team gt Settings 2 Click Virtual Machines Team Settings Connections Virtual Machines LAN Segments Options Startup details Virtual Machine Delay GB Database Serve 10s Before starting the next virtual machine a n a GB Cient 001 2 Client 002 Delay 10 seconds a n e From this tab you can add and remove virtual machines and change the virtual machine startup sequence The list of virtual machines associated with the team is displayed on the left in the order of the start up sequence the virtual machine at the top of the list is the first in the start up sequence the virtual machine at the bottom of the list is the last in the sequence Changing the Start Up Sequence for a Team To set the start up sequence for members of a team 1 Choose Team gt Settings 2 Click Virtual Machines 3 Arrange the virtual machine start order Select any virtual machine and use the Up or Down buttons to change the sequence 4 Set the delay time between virtual machines Under Startup details you can set a delay time between each virtual machine and the next virtual machine in the start up sequence This delay is applied to power on power off suspend and resume operations The de
156. achine then click OK You may also want to rename the Original Configuration profile to Physical Machine www vmware com 10 20 21 22 23 24 25 on nH CHAPTER 8 Using Disks Click OK to close the System Properties dialog box Shut down Windows 95 and reboot the system Boot into your host operating system Linux Windows NT Windows 2000 Windows XP or Windows Server 2003 Start the Windows 95 virtual machine Select Virtual Machine from the list of profiles when prompted If you are prompted to select the CPU Bridge accept the default then click OK 12 13 14 Restart Windows 95 when prompted Again select Virtual Machine from the list of profiles when prompted When the video card is detected you are prompted to select which driver you want to install for your new hardware Click the Select from a list of alternate drivers radio button then click OK Select Display Adapters from the Select Hardware Type dialog box Select Standard Display Adapter VGA from the device list then click OK Restart Windows 95 when prompted nstall VMware Tools as outlined in Installing a Guest Operating System and ware Tools on page 137 then restart the virtual machine V Start the Device Manager and expand the Display adapters tree Highlight VMware SVGA Click Properties Uncheck Physical Machine then click OK Click Close S S hut down Windows 95 and power off the virtual machine hut
157. achine has started but the user can switch to the virtual machine with its direct switch key or with the cycle key Stopping a Virtual Machine vmware fullscreen poweroff lt config file gt vmware fullscreen poweroff lt alias gt Use this command to shut down the specified virtual machine You can specify the path to the configuration vmx file or you can specify the alias if you used name when you started the virtual machine Stopping All Virtual Machines vmware fullscreen exit Use this command to power off all virtual machines cleanly VMware Workstation exits as soon as all the virtual machines have powered off Switching Among Virtual Machines and the Host vmware fullscreen switchto lt config file gt vmware fullscreen switchto lt alias gt vmware fullscreen switchto host vmware fullscreen switchto next Use this command to switch to the specified virtual machine to the host operating system or to the next machine virtual machine or host in the cycling order A virtual machine must already be powered on before you can switch to it When specifying a virtual machine you can specify the path to the configuration vmx file or you can specify the alias if you used name when you started the virtual machine Checking the Status of VMware Workstation vmware fullscreen query This command tells you if VMware Workstation is already running in full screen switch mode If it is the response to this command al
158. achine is running its window is the active window and a USB device is plugged into the host computer the device automatically connects to the guest instead of the host This auttoconnect feature can be disabled in the USB Controller panel of the virtual machine settings editor VM gt Settings If all of the virtual machine s USB ports are already occupied when it is trying to connect automatically to a new device a dialog box gives you a choice you can either disconnect one of the existing USB devices to free its port or ignore the new device allowing the device to connect to the host Connecting USB Devices Manually Choose VM gt Removable Devices to connect specific USB devices to your virtual machine You can connect up to two USB devices at a time If the physical USB devices are connected to the host computer through a hub the virtual machine sees only the USB devices not the hub There is a menu item for each of the USB ports Move the mouse over one of these items to see a cascading menu of devices that are plugged into your host computer and available for use To connect a device to the virtual machine click its name f a device is already connected to that port click the name of a new device to release he first device and connect the new one To release a connected device click None on the cascading menu for the port to which it is connected If you physically plug a new device into the host computer and the aut
159. again These four interfaces should have different IP address on separate subnets Configuring the Virtual Machines Now you have two host only interfaces VMnet1 and VMnet2 You are ready to set up your virtual machines for one of the following configurations dl The virtual machine is configured with one virtual Ethernet adapter and tha irtual adapter is connected to the default host only interface VMnet 1 lt The virtual machine is configured with one virtual Ethernet adapter and tha irtual adapter is connected to the newly created host only interface VMnet2 lt The virtual machine is configured with two virtual Ethernet adapters One virtual adapter is connected to the default host only interface VMnet1 and the other irtual adapter is connected to the newly created host only interface VMnet2 lt 358 www vmware com CHAPTER 12 Configuring a Virtual Network Configuration 1 Connect to the Default Host Only Interface 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine 2 Launch VMware Workstation and open the virtual machine 3 Edit the configuration using the virtual machine settings editor VM gt Settings Select Network Adapter then choose Host only VMnet1 from the drop down ist on the right f no network adapter is shown in the list of devices click Add then use the Add Hardware Wizard to a
160. age 241 e Setting Up the SVGA Vi System Booted from a Windows 95 e Configuring Dual or page 241 Setting Up the SVGA Vi Booted from a Physica deo Driver for Use with a Windows 98 Guest Operating Physical Disk on page 254 ultiple Boot Systems to Run with Workstation on deo Driver for a Windows 95 Guest Operating System Disk on page 252 SCSI Systems Using a Linux Host e Configuring Dual or Multiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host on page 257 Other Uses of Physical Disks It is also possible to install a guest operating system on a physical disk when you plan to use that disk only within a virtual machine For details on setting up a such a configuration see Installing an Operating System on a Physical Partition from a Virtual Machine on page 263 www vmware com CHAPTER 8 Using Disks Configuring Dual or Multiple Boot Systems to Run with Workstation VMware Workstation uses description files to control access to each physical IDE device on the system These description files contain access privilege information that controls a virtual machine s access to certain partitions on the disks This mechanism prevents users from accidentally running the host operating system again as a guest or running a guest operating system that the virtual machine was not configured to use The description file also prevents accidental corruption of physical disk partitions by badly behaved o
161. agment only growable virtual disks You cannot defragment preallocated virtual disks p lt mountpoint gt Prepares a virtual disk for shrinking If the virtual disk is partitioned into volumes each volume must be prepared separately The volume C or D for example must be mounted by VMware DiskMount at lt mountpoint gt For information on mounting and unmounting virtual disk volumes with DiskMount see the VMware DiskMount user s manual available from the VMware Web site at www vmware com pdf VMwareDiskMount pdf The VMware DiskMount Utility is available as a free download at www vmware com download diskmount html After you prepare the volume unmount it with VMware DiskMount Continue mounting each volume of the virtual disk and preparing it for shrinking until you complete this process for all the volumes of the virtual disk You can mount only one volume of a virtual disk at a time with VMware DiskMount You can prepare volumes of virtua Windows hosts only disks for shrinking on 232 www vmware com Options and Parameters Description k lt diskname gt Shrinks the specified virtual disk You can shrink only growable virtual disks You can shrink virtual disks on Windows hosts only You cannot shrink a virtual disk if the virtual machine has a snapshot To keep the virtual disk in its current state use the snapshot manager to delete all snapshots To discard changes made since
162. al Ethernet switch VMnet8 NAT device NAT gives a virtual machine access to network resources using the host computer s IP address A network address translation connection is set up automatically if you follow the Custom path in the New Virtual Machine Wizard and select Use network address translation If you want to connect to the Internet or other TCP IP network using the host computer s dial up networking or broadband connection and you are not able to give your virtual machine an IP address on the external network NAT is often the easiest way to give your virtual machine access to that network www vmware com CHAPTER 12 Configuring a Virtual Network NAT also allows you to connect to a TCP IP network using a Token Ring adapter on the host computer If you use NAT your virtual machine does not have its own IP address on the external network Instead a separate private network is set up on the host computer Your virtual machine gets an address on that network from the VMware virtual DHCP server The VMware NAT device passes network data between one or more virtual machines and the external network It identifies incoming data packets intended for each virtual machine and sends them to the correct destination If you select NAT the virtual machine can use many standard TCP IP protocols to connect to other machines on the external network For example you can use HTTP to browse Web sites FTP to transfer files and Telnet to l
163. al Machine When a virtual machine is powered on VMware Workstation automatically assigns each of its virtual network adapters an Ethernet MAC address MAC stands for media access control A MAC address is the unique address assigned to each Ethernet network device The software guarantees that virtual machines are assigned unique MAC addresses within a given host system In most cases the virtual machine is assigned the same MAC address every time it is powered on so long as the virtual machine is not moved the path and filename for the virtual machine s configuration file must remain the same and no changes are made to certain settings in the configuration file In addition VMware Workstation does its best but cannot guarantee to automatically assign unique MAC addresses for virtual machines running on multiple host systems Avoiding MAC Changes To avoid changes in the MAC address automatically assigned to a virtual machine you must not move the virtual machine s configuration file Moving it to a different host computer or even moving it to a different location on the same host computer changes the MAC address You also need to be sure not to change certain settings in the virtual machine s configuration files If you never edit the configuration file by hand and do not remove the virtual Ethernet adapter these settings remain untouched If you do edit the configuration file by hand be sure not to remove or change the following
164. al volumes on the disk This destroys all data on the disk 3 Right click the disk icon and select Revert to Basic Disk 4 Create the partitions you want on the disk www vmware com CHAPTER 8 Using Disks Configuring Dual or Multiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host t may be possible to configure VMware Workstation so that you can use an operating system already installed and configured on a SCSI disk as a guest operating system inside a VMware Workstation virtual machine Using an existing SCSI disk or SCSI physical disk inside a virtual machine is supported only if the host has an LSI Logic or BusLogic SCS adapter LS Logic is the preferred choice because it is easier to find drivers for LSI Logic adapters It may be possible to configure a host with a different SCSI adapter so the same operating system can be booted both natively and inside a virtual machine but this approach is not supported by VMware For details on some of the key issues involved see Known ssues and Background Information on Using SCSI Physical Disks on page 260 Before You Create the Virtual Machine Configuration You must create a separate configuration for each guest operating system Allow read and write access to the partitions used by that operating system only 1 Before starting if you are running a Windows guest operating system you should read Setting Up Hardware Profiles in Virtual Machines on page 247 Y
165. am gt Add menu If you select No I will add LAN segments later skip to step 9 If you select Yes the wizard continues For for information about LAN segments see Working with Team Networks on page 313 Click Next Click Add to create a LAN segment New Team Wizard Add LAN Segments to the Team Use the Add and Remove buttons to set up the LAN Segments in this team LAN Segment Summary SLANT Unlimited Kbps 0 loss LAN Unlimited Kbps 0 loss You can change default names and bandwidth later See LAN Segments on page 321 for the procedure Click Next CHAPTER 11 Configuring Teams 303 VMware Workstation 5 User s Manual 8 Select the network connections for each virtual machine on the team New Team Wizard Network Virtual Machines in the Team Connect the virtual machines to the Team s LAN Segments or other external options using the checkboxes Note that you can change the team s connections options at ary time using the Team gt Settings menu Network Virtual Machines in the Team Connect the virtual machines to the team s LAN segments or other external options using the checkboxes Virtual Machine i Mandrake Linux Ethemet 1 m Ubuntu 5 0 4 WEthemet 1 o m m m P Add Adapter Remove Adapter Note that you can change the team s connection options at any time using the Team gt Settings menu X Cancel Back 50 Finish oa
166. and double click it to change settings for VMware Tools You can also reactivate the system tray icon On the Options tab select Show VMware Tools in the taskbar In a Linux or FreeBSD virtual machine boot the guest operating system start X and launch your graphical environment Then you can launch the VMware Tools background application with this command vmware toolbox amp You may run VMware Tools as root or as a normal user To shrink virtual disks you must run VMware Tools as root su With some window managers you can place the command to start VMware Tools in a startup configuration so VMware Tools starts automatically when you start your graphical environment Consult your window manager s documentation for details www vmware com CHAPTER 6 Running VMware Workstation Suspending and Resuming Virtual Machines You can save the current state of your virtual machine by suspending it Later you can resume the virtual machine to pick up work quickly right where you stopped with all documents you were working on open and all applications in the same state as they were at the time you suspended the virtual machine To suspend a virtual machine 1 If your virtual machine is running in full screen mode return to window mode by pressing the Ctrl Alt key combination Click Suspend on the VMware Workstation toolbar When VMware Workstation has completed the suspend operation it is safe to exit VMware Workstat
167. arent virtual machine To power on and to work with a linked clone of a linked clone Workstation must be able to locate all ancestors in the chain Refer to Linked Clones and Access to the Parent Virtual Machine on page 296 Making a Full Clone of a Linked Clone It is possible to make a full clone from a linked clone using the Clone Virtual Machine Wizard e The linked clone can be used as before e The full clone created with this action is an independent virtual machine that does not require access to the linked clone or its ancestors Note To make a full clone from a linked clone Workstation must have access to the linked clone and all ancestors at the time you run the Clone Virtual Machine Wizard Refer to Linked Clones and Access to the Parent Virtual Machine on page 296 Network Identity for a Clone The Clone Virtual Machine Wizard creates a new MAC address for the cloned virtual machine Other configuration information is identical to that of the parent virtual machine For example a machine s name and static IP address configuration are not altered by the Clone Virtual Machine Wizard To prevent conflict with static IP addressing change the clone s static IP before the clone connects to the network Refer to Selecting IP Addresses on a Host only 295 VMware Workstation 5 User s Manual 296 Network or NAT Configuration on page 347 for a discussion regarding static IP address configuration The
168. as you work Scroll bars appear in the console when the Workstation console is smaller than the guest operating system display A black border appears in the console when the console is larger than the guest operating system display www vmware com CHAPTER 6 Running VMware Workstation Special Considerations for Display Resizing in Linux Guests Workstation 5 5 extends the display resizing features Autofit Guest and Fit Guest Now to Linux guests For Linux guests the following considerations apply to display resizing You must update VMware Tools to version 5 5 in the guest for the display resizing options to work To use the Autofit Guest and Fit Guest Now options VMware Tools must be running If you have virtual machines that were suspended under a version of VMware Tools before version 5 5 display resizing will not work until the virtual machines are completely powered off and then powered on again Rebooting the virtual machine is not sufficient Powering the suspended virtual machines off and on can be done before or after updating VMware Tools Caution If you update VMware Tools without powering off and powering on suspended virtual machines and then attempt to resize the guest the display will be corrupted Allthe restrictions on resizing that the X11 Windows system imposes on physical hosts still apply to guests e You cannot resize to a mode that is not defined The VMware Tools configuration script w
169. atically In Linux guests this command connects the virtual machine s virtual CD ROM drive to the VMware Tools ISO image for that guest but the installer does not start automatically you must complete the installation with additional manual steps as described in VMware Tools for Linux Guests on page 142 snapshot Create a snapshot of a virtual machine Path to vmx file snapshot name listSnapshots List all snapshots in a virtual machine Path to vmx file www vmware com CHAPTER 4 Learning VMware Workstation Basics Command Description Option deleteSnapshot Remove a snapshot from a virtual machine Path to vmx file snapshot name revertToSnapshot Go toa snapshot in a virtual machine Path to vmx file If a snapshot has a unique name within a virtual machine you can revert to that snapshot simply by specifying the path to the virtual machine s configuration file and the snapshot name Path to vmx file snapshot name If several snapshots have the same name you can still specify a snapshot by including a pathname for the snapshot name A pathname is a series of snapshot names separated by forward slash characters Each name specifies a different snapshot in the tree and together the names ina pathname will specify a path from the root snapshot to the snapshot you are naming For example suppose you include the pathname snap1 snap2 This will identify a snapshot na
170. atically appears on the Favorites list as well as in a summary window e Ifthe parent virtual machine is configured for a LAN segment the virtual Ethernet adapter for that LAN segment on the clone is disconnected To connect to a network you must reconfigure the virtual Ethernet adapter manually Taking Snapshots of Individual Virtual Machines in a Team Snapshots operate on virtual machines not on the whole team When a team is active the Snapshot button on the toolbar takes a snapshot of only the active virtual machine If you want to preserve the state of all virtual machines on a team power off the team then take a snapshot of each virtual machine before you power on the team again 309 VMware Workstation 5 User s Manual 310 Starting and Stopping Teams Power operations for teams are much the same as those for an individual virtual machine However for a team you can also configure the sequence in which the members of a team power on and off See Changing the Start Up Sequence for a Team on page 320 e Powering On a Team on page 310 e Powering Off a Team on page 310 e Suspending a Team on page 311 e Resuming a Team on page 311 Note You cannot close VMware Workstation if a team is powered on Powering On a Team To power on a team 1 Select the team to power on select the team from the Favorites list or click the summary tab for the team 2 Click the Power On button on the toolbar The team begins
171. ating System on a Physical Partition from a Virtual Machine on page 263 In most cases however it is better to use a virtual disk Only expert users should attempt physical disk configurations Note You should not use a physical disk to share files between host and guest operating systems It is not safe to make the same partition visible to both host and guest You can cause data corruption if you do this To share files between host and guest operating systems use shared folders For details see Using Shared Folders on page 176 www vmware com CHAPTER 8 Using Disks Disk Files In the virtual machine settings editor VM gt Settings you can choose the disk files for a virtual machine See What Files Make Up a Virtual Machine on page 108 for a comprehensive list of the other files You may want to choose a file other than the one created by the New Virtual Machine Wizard if you are using a virtual disk that you created in a different location or if you are moving the automatically created disk files to a new location The disk files for a virtual disk store the information that you write to a virtual machine s hard disk the operating system the program files and the data files The virtual disk files have a vmdk extension A virtual disk is made up of one or more vmdk files On Windows hosts each virtual disk is contained in one file by default You may as an option configure the virtual disk to use a set of f
172. b If the driver provider shown on that page is Microsoft you have the correct driver already 419 VMware Workstation 5 User s Manual 420 If the driver provider is not Microsoft download the latest USB driver for your host operating system from the Microsoft Web site and follow the Microsoft instructions to install it Details are available in Microsoft knowledge base article 319973 Using USB with a Linux Host On Linux hosts VMware Workstation uses the USB device file system to connect to USB devices In most Linux systems that support USB the USB device file system is at proc bus usb If your host operating system uses a different path to the USB device file system you can change it in the virtual machine configuration vmx file Add the following line to change the default usb device file system path usb generic devfsPath lt your_path_to_usbdevfs gt What Has Control over a USB Device Only one computer host or guest can have control of a USB device at any one time Device Control on a Windows Host When you connect a device to a virtual machine it is unplugged from the host or from the virtual machine that previously had control of the device When you disconnect a device from a virtual machine it is plugged in to the host Caution On Windows 2000 Windows XP and Windows Server 2003 hosts you need to take a special step to disconnect USB network and storage devices from the host Th
173. blems If you run more than one virtual machine at a time and if their CD drives are in legacy emulation mode you may prefer to start the virtual machines with their CD drives disconnected This ensures that you do not have multiple virtual machines connected to the CD drive at the same time 227 VMware Workstation 5 User s Manual 228 Adding Floppy Drives to a Virtual Machine You can add floppy drives to your virtual machine to a total of two floppy drives A virtual floppy drive can connect to a physical floppy drive on the host computer to an existing floppy image file or to a blank floppy image file Adding a Floppy Drive 1 Open the virtual machine settings editor VM gt Settings and click Add to start the Add 2 Click Flo 3 Select w Hardware Wizard ppy Drive then click Next hat you want to connect to a physical floppy drive on the host computer an existing floppy image file or a new floppy image file Click Next 4 Ifyou se Window click Fini If you se image fil If you se ected Use a physical floppy drive choose the drive s letter on a s host or device name on a Linux host from the drop down list then sh ected Use a floppy image type the path and filename for the floppy e you want to use or click Browse to navigate to the file Click Finish ected Create a blank floppy image use the default path and filename or type i contains n a new one To navigate to a l
174. bridged and host only networking available to your virtual machines you must ch oose both options during the Workstation installation to make all networking configurations available for your virtual machines www vmware com CHAPTER 12 Configuring a Virtual Network Components of the Virtual Network The following sections describe the devices that make up a virtual network Virtual switch Like a physical switch a virtual switch lets you connect other networking components together Virtual switches are created as needed by the VMware Workstation software up to a total of nine switches You can connect one or more virtual machines to a switch By default a few of the switches and the networks associated with them are used for special named configurations e The bridged network uses VMnet0 e The host only network uses VMnet1 e The NAT network uses VMnets he other available networks are simply named VMnet2 VMnet3 VMnet4 and so on To connect a virtual machine to a switch In the virtual machine settings editor select the virtual network adapter to connect and then configure the adapter to use the desired virtual network Bridge The bridge lets you connect your virtual machine to the LAN used by your host computer It connects the virtual network adapter in your virtual machine to the physical Ethernet adapter in your host computer The bridge is installed during VMware Workstation installa
175. ce Features on page 457 There are no corresponding settings on a Linux host change networking settings For details see Locking Out 93 VMware Workstation 5 User s Manual Virtual Machine Settings VMware Workstation configures a newly created virtual machine based on the guest operating system you select in the New Virtual Machine Wizard File gt New gt Virtual Machine Use the virtual machine settings editor VM gt Settings if you want to change any configuration options from the wizard defaults Hardware Virtual Machine Settings Memory Specify the amount of memory allocated to this virtual machine The memory size must be a multiple of 4 MB E Hard Disk IDE 0 0 co rom 10E 1 0 0 deter Memory for this virtual machine Brioppy rive Ar 256 nib J 256 MB B Ethernet rol Use the Hardware tab to add remove and configure virtual devices for the virtual machine emory See Memory Usage Notes on page 443 Virtual Disk See Adding a New Virtual Disk to a Virtual Machine on page 219 CD ROM See Adding DVD or CD Drives to a Virtual Machine on page 226 E oppy See Adding Floppy Drives to a Virtual Machine on page 228 thernet See Adding and Modifying Virtual Network Adapters on page 336 Serial Port See Using Serial Ports on page 397 Parallel Port See Using Parallel Ports on page 392 USB Controller See Using USB Devices in a Virtual Mach
176. ce settings affected by conver sion 127 Virtual machine settings editor defined 475 restricting access 457 459 using 182 Virtual network editor 476 Virtual PC importing 125 129 version support 127 Virtual Server importing 125 version support 127 Virtual SMP moving SMP virtual machines between Workstation and ESX Server 430 processors in virtual machine hard ware profile 248 using Virtual switch 327 Virtual Symmetric Multiprocessing See Virtual SMP VirtualCenter and virtual disk manager 231 Virus Buster See Trend Micro Virus Buster net 356 net8 366 mrun 104 lt lt lt lt ware command line 102 ware community forums 41 VMware Player closing 207 configuring 206 running 205 sharing virtual machines with 205 VMware Tools configuring 149 defined 476 for FreeBSD guests 146 for Linux guests 142 for NetWare guests 147 for Windows guests 141 installing 140 installing from the command line with the RPM installer 144 installing from the command line with the tar installer 143 starting 160 VMware Virtual Disk Manager 230 VMware config pl 56 vmware fullscreen log file 469 V scan code defined 409 table of codes 413 w window autofit 170 fit 170 Window size 170 172 Windows installing on Windows host 47 supported 32 bit guest operating systems 38 supported 64 bit guest operating systems 38 uninstalling on Windows host 53 upgrading on Windows host 65 VMware Tool
177. ch Bridge Host Virtual Adapter 306 307 307 307 309 309 Ww j Ko O 2 Ww w W U UVVUUMVUVUVUVUVUVUVUMVUVUVUVUVUVUVUWV U OO WAANN DANN WwW N jo 321 322 323 325 326 327 327 327 328 11 AT Device 328 DHCP Server 328 etwork Adapter 328 Common Networking Configurations 329 Bridged Networking 329 etwork Address Translation NAT 330 ost Only Networking 332 Custom Networking Configurations 333 Changing the Networking Configuration 336 Adding and Modifying Virtual Network Adapters 336 Configuring Bridged Networking Options on a Windows Host 338 Enabling Disabling Adding and Removing Host Virtual Adapters ___ 343 Advanced Networking Topics 346 Selecting IP Addresses on a Host only Network or NAT Configuration 347 Avoiding IP Packet Leakage in a Host Only Network 350 Maintaining and Changing the MAC Address of a Virtual Machine ___ 352 Controlling Routing Information for a Host only Network on a Linux Host 354 Other Potential Issues with Host Only Networking on a Linux Host___ s 355 Setting Up a Second Bridged Network Interface on a Linux Host 356 Setting Up Two Separate Host Only Networks 357 Routing between Two Host Only Networks 360 Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host__ 364 Understanding NAT 365 Using NAT 366 The Host Computer and the NAT
178. ch nothing occurs the movie will only include those periods of time when something is actually happening in the virtual machine This reduces the file size and length of the movie While movie capture is active a red circle a virtual LED appears in the status bar at the lower right he ee 5038 An indicator appears on the status bar during movie capture 3 Within the virtual machine perform the actions you want to appear in the move 4 Choose VM gt Stop Movie Capture The red circle disappears from the status bar and your movie is saved 183 VMware Workstation 5 User s Manual 184 Playing a Movie Requires VMware CODEC You can play back your movie in any compatible media player However a VMware CODEC coder decoder must be installed This CODEC is automatically installed on a machine with VMware Workstation A separately downloadable installer is also available for playback of movies on machines without VMware Workstation www vmware com Where to Go Next e Using Disks on page 209 e Moving and Sharing Virtual Machines on page 187 e Preservin g the State of a Virtual Machine on page 271 e Cloning a Virtual Machine on page 289 e Configuri e Configuri e Configuri ng Teams on page 299 ng a Virtual Network on page 325 ng Video and Sound on page 379 e Connecti e Performa ng Devices on page 391 nce Tuning on page 431 CHAPTER 6 Running VMware Workstation 185
179. ck Add The Add Hardware Wizard guides you through the steps to create your virtual disk Click Hard Disk then click Next Select Use an existing virtual disk then click Next Enter the path and filename for the existing disk file or click Browse to navigate to the file Click OK 221 VMware Workstation 5 User s Manual 222 Removing a Virtual Disk from a Virtual Machine Use the virtual machine settings editor to disconnect a virtual disk from a virtual machine To remove a virtual disk from a virtual machine 1 Select a virtual machine and choose VM gt Settings Note A virtual machine must be powered off before you can remove a virtual disk You cannot remove a virtual disk if the virtual machine is suspended 2 Select the virtual disk you want to remove 3 Click Remove The virtual disk is disconnected from virtual machine Note The Remove command does not delete files from the host file system You can delete virtual disk files manually You can also retain the virtual disk files and reconnect the virtual disk to the virtual machine later See Adding an Existing Virtual Disk to a Virtual Machine on page 221 www vmware com Adding Physical Disks to a Virtual Machine Use the virtual machine settings editor VM gt Settings to add a new physical disk to your virtual machine The virtual machine should be powered off before you begin If it is not shut down the guest operating system normally then click P
180. ck it Tabs in the VMware Tools control panel are described in the following sections 149 VMware Workstation 5 User s Manual The Options Tab VMware Tools Properties x Options Devices Scripts Shared Folders Shrink About Miscellaneous Options F Time spr joperating I Show VMware Tools in the taskbar Cancel op Help The Options tab shows the Miscellaneous Options Time synchronization between the virtual machine and the host operating system Note You can synchronize the time in the guest operating system with the time on the host operating system only when you set the clock in the guest operating system to a time earlier than the time set on the host Under some circumstances the virtual machine may synchronize time with the host even though this item is not selected If you want to disable time synchronization completely open the virtual machine s configuration file vmx in a text editor and set the following options to FALSE tools syncTime tools synchronize restore time synchronize resume disk time synchronize continue time synchronize shrink e Show VMware Tools in the taskbar 150 www vmware com CHAPTER 5 Creating a New Virtual Machine The Devices Tab VMware Tools Properties x Options Devices Scripts Shared Folders Shrink About Check a device to connect it to the virtual machine Floppy 1 Nici Audio Cancel Help The
181. covered in V Scan Code Table on page 413 The keysym mapping tables described in this section are also helpful Use this feature to make small modifications to the mapping For example to swap left Ctrl and Caps Lock use the following lines xkeymap keycode 64 0x01d X Caps_Lock gt VM left ctrl xkeymap keycode 37 0x03a X Control L gt VM caps lock These configuration lines can be added to the individual virtual machine configuration to your personal VMware Workstation configuration vmware config or even to the host wide etc vmware config or installation wide usually usr local 1ib vmware config configuration When key code mapping cannot be used or is disabled VMware Workstation maps keysyms to v scan codes It does this using one of the tables in the xkeymap directory in the VMware Workstation installation usually usr local lib vmware Which table you should use depends on the keyboard layout The normal distribution includes tables for PC keyboards for the United States and a number of European countries and languages And for most of these there are both the 101 key or 102 key and the 104 key or 105 key variants VMware Workstation automatically determines which table to use by examining the current X keymap However its decision making process may sometimes fail In addition each mapping is fixed and may not be completely right for any given keyboard and X key code to keysym mapping For exam
182. ction explains how to set up the virtual machine to use NetLogon The setup process is similar to the way you set up a physical computer on one LAN that is using a domain controller on another LAN In order to log on to a Windows domain outside the virtual NAT network the virtual machine needs access to a WINS server for that domain There are two ways you can connect the virtual machine to a WINS server You can connect to the WINS server provided by the DHCP server used on the NAT network provided that the WINS server is already set up on the host If you want to connect from the virtual machine to a 373 VMware Workstation 5 User s Manual WINS server not set up on the host you can manually enter the IP address of the WINS server Using NAT to Connect to an Existing WINS Server Already Set Up on the Host In order to use this method a WINS server in the same workgroup or domain must be set up on the host These steps use Windows 2000 Windows XP or Windows Server 2003 as a guide The process is similar for Windows NT Windows Me and Windows 9x guests 1 In the virtual machine right click on My Network Places and choose Properties 2 In the Network Connections window right click the virtual network adapter and choose Properties 3 In the Properties dialog box select Internet Protocol TCP IP then click Properties 4 Inthe TCP IP Properties dialog box click Advanced 5 Click the WINS tab then under NetBIOS setti
183. d 5 Click OK The team is removed permanently from VMware Workstation and the host file system If you chose Delete Team and VMs in step 4 the virtual machines in the team are also removed permanently from VMware Workstation and the host file system www vmware com CHAPTER 11 Configuring Teams Adding and Removing Virtual Machines e Adding an Existing Virtual Machine to a Team on page 307 e Removing a Virtual Machine from a Team on page 307 Adding an Existing Virtual Machine to a Team To add an existing virtual machine to a team 1 Select Team gt Add gt Existing Virtual Machine A file open dialog box appears 2 Browse to the folder with the vmx file for the virtual machine you want to add 3 Selectthe vmx file and click Open The virtual machine is added to the team There are some issues to consider when you add a virtual machine to a team e Avirtual machine is not powered on when you add it to a running team You must power on the added virtual machine manually to use it during the current session However the added virtual machine is thereafter powered on or off with the rest of the team e When you add a virtual machine to a team you can no longer operate the virtual machine outside the team Adding a virtual machine to a team therefore removes it from the Favorites list Removing a Virtual Machine from a Team To remove a virtual machine from a team 1 Select the team with the virtual machine you
184. d Laptop If you put a linked clone on a laptop and the parent remains on another machine the clone can be used only when the laptop connects to the network or drive where the parent is stored If you want to use a cloned virtual machine on a disconnected laptop you must use a full clone or you must move the parent virtual machine to the laptop www vmware com CHAPTER 10 Cloning a Virtual Machine Protecting the Parent of Linked Clones To prevent anyone from deleting the parent virtual machine for a linked clone you can designate the parent as a template The two parts of the process are discussed in the following sections e Enabling Template Mode for the Parent on page 297 e Creating a Linked Clone From a Template on page 298 Enabling Template Mode for the Parent You can avoid inadvertently deleting the parent of linked clones by designating the parent virtual machine as a template To designate a virtual machine as a template enable template mode in the virtual machine settings editor 1 Select the virtual machine 2 Choose VM gt Settings 3 Select Options 4 Click Advanced 5 Select Enable Template mode to be used for cloning Virtual Machine Settings K Hare Process pioities Input grabbed nomal Input ungrabbed normal x These settings override the global values specified in Edt gt Preferences gt Priority Settings Disable acceleration C Disable memory page timing C Log vitual mach
185. d Lockout tabs apply no matter what virtual machine is running or who is logged on to the host computer The settings on the Priority tab apply to all virtual machines for the user currently logged on to the host computer They do not affect settings made by any other user on the computer To make changes to these settings choose Edit gt Preferences 87 VMware Workstation 5 User s Manual Workspace Preferences Workspace Input Hot Keys Display Memory Priority Lockout Default location for teams and virtual machines CADocuments and Settings user My Docume Opened tabs Bemember opened tabs between sessions Software updates Check for updates Weekly Last Checked Mon Aug 22 19 35 37 2005 V No updates are available Next Check Mon Aug 29 19 35 37 2005 The Workspace tab lets you change the directory in which newly created virtual machines are stored The directory Workstation uses by default is displayed under Default location for teams and virtual machines To set a different directory type in the path or click Browse to navigate to the directory you want to use Workstation creates a directory for each new virtual machine under the directory you specify here If you select Remember opened tabs between sessions you see a tab for each opened virtual machine or team in the console window the next time you start Workstation A virtual machine or team is considered opened if both of the following condition
186. d applications you need all on a single desktop Powerful Virtual Machine Software for the Technical Professional VMware Workstation is desktop software for developers and IT professionals that allows you to run multiple x86 based desktop and server operating systems simultaneously on a single PC in fully networked portable virtual machines with no rebooting or hard drive partitioning required With VMware Workstation you spend less time procuring and configuring and more time testing and deploying Over three million software development quality assurance and IT professionals worldwide find VMware Workstation an indispensable tool Key benefits include Run multiple operating systems simultaneously on a single physical machine VMware Workstation is desktop software for software developers and IT professionals that allows a single PC to simultaneously run multiple x86 based operating systems including Windows Linux and NetWare and their applications in fully networked portable virtual machines without rebooting or hard drive partitioning The result is reduced hardware expenditures and quicker access to different computing environments Additionally VMware Workstation lets users avoid platform lock in and preserve the freedom and flexibility to deploy the most appropriate platforms for their needs www vmware com CHAPTER 1 Introduction and System Requirements Revolutionize software development and test
187. d for isochronous USB devices such as webcams speakers and microphones Note Windows NT and Linux kernels older than 2 2 17 do not support USB Although your host operating system must support USB you do not need to install device specific drivers for your USB devices in the host operating system if you want to use those devices only in the virtual machine On a Windows 2000 host computer with USB 2 0 support be sure you are using the Microsoft USB 2 0 driver for the USB controller Third party USB 2 0 drivers such as those provided by some motherboard manufacturers are not supported For notes on replacing the third party drivers see Replacing USB 2 0 Drivers on a Windows 2000 Host on page 419 Notes on USB Support in Version 5 We have tested a variety of USB devices with this release In general if the guest operating system has appropriate drivers you should be able to use PDAs printers storage disk devices scanners MP3 players digital cameras and memory card readers Modems and certain streaming data devices such as speakers and Web cams do not work properly 417 VMware Workstation 5 User s Manual 418 Enabling and Disabling the USB Controller The virtual machine s USB ports are enabled by default If you will not be using USB devices in a virtual machine you can disable its USB controller using the virtual machine settings editor Connecting USB Devices Autoconnecting USB Devices When a virtual m
188. d when powering off e Askme asks what you want to do with a snapshot each time you power off Snapshots and Legacy Virtual Machines When you power on a virtual machine created in Workstation 3 or 4 a dialog box gives you the choice to upgrade the virtual machine or to leave the virtual machine unchanged For full Workstation 5 functionality you must upgrade If you do not upgrade whenever you power on the legacy virtual machine Workstation 5 offers you the choice to upgrade Upgrading Legacy Virtual Machines to Workstation 5 You can upgrade a legacy virtual machine from Workstation 3 or Workstation 4 to VMware Workstation 5 Any snapshot of the upgraded virtual machine is upgraded and commands for multiple snapshots become available Note An upgraded snapshot retains disk contents but discards memory contents When you power on that snapshot it appears as if the virtual machine has crashed Using Legacy Virtual Machines without Upgrading If you choose not to upgrade you preserve the ability to use the virtual machine in older Workstation 3 or 4 but in Workstation 5 there is no snapshot functionality allowed When you open a legacy virtual machine in Workstation 5 you see a warning message to this effect www vmware com CHAPTER Cloning a Virtual Machine The following sections describe clones and configuring a clone Understanding Clones on page 290 e Why Make a Clone on page 290 e Full and Linked
189. data to a disk configured in this way You may also configure virtual disks so all the disk space is allocated at the time the virtual disk is created This approach provides enhanced performance and is useful if you are running performance sensitive applications in the virtual machine Virtual disks can be set up as IDE disks for any guest operating system They can be set up as SCSI disks for any guest operating system that has a driver for the LSI Logic or BusLogic SCSI adapter available in a VMware Workstation virtual machine You determine which SCSI adapter to use at the time you create the virtual machine Note To use SCSI disks in a Windows XP virtual machine you need a special SCSI driver available from the download section of the VMware Web site at www vmware com download Follow the instructions on the Web site to use the driver with a fresh installation of Windows XP A virtual disk of either type can be stored on either type of physical hard disk That is the files that make up an IDE virtual disk can be stored on either an IDE hard disk or a SCSI hard disk So can the files that make up a SCSI virtual disk They can also be stored on other types of fast access storage media such as DVD or CD ROM discs A key advantage of virtual disks is their portability Because the virtual disks are stored as files on the host machine or a remote computer you can move them easily to a new location on the same computer or to a d
190. dd an adapter Configuration 2 Connect to the Newly Created Host Only Interface 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine 2 Launch VMware Workstation and open the virtual machine 3 Edit the configuration using the virtual machine settings editor VM gt Settings Select Network Adapter then choose Custom VMnet2 from the drop down ist on the right f no network adapter is shown in the list of devices click Add then use the Add Hardware Wizard to add an adapter Configuration 3 Connect to Two Host Only Interfaces 1 Create the virtual machine using the New Virtual Machine Wizard or use an existing virtual machine 2 Launch VMware Workstation and open the virtual machine 3 Edit the configuration using the virtual machine settings editor VM gt Settings Select the first network adapter in the list of devices then choose Host only VMnet1 from the drop down list on the right Select the second network adapter in the list of devices then choose Custom VMnetz2 from the drop down list on the right If you need to add one or more network adapters click Add then use the Add Hardware Wizard to add an adapter 359 VMware Workstation 5 User s Manual 360 At this point you can power on the virtual machine and install your guest operating system In configurations 1 and 2 you see one AMD PCNet Family Adapter In configuration 3 you see two AMD P
191. ded minimum A Recommended memory A Maximum for best performance In most cases it is best to keep the default memory setting If you plan to use the virtual machine to run many applications or applications that need high amounts of memory you may want to use a higher memory setting For more information see Virtual Machine Memory Size on page 443 Note You cannot allocate more than 2GB of memory to a virtual machine if the virtual machine s files are stored on a file system such as FAT32 that does not support files greater than 2GB Configure the networking capabilities of the virtual machine New Virtual Machine Wizard x Network Type What type of network do you want to add Network connection Olst aking Give the guest operating system drect access to an external Ethemet network The guest must have its own IP address on the extemal network O Use network address translation NAT Give the quest operating system access to the host computer s diahup or etemal Ethemet network connection using the host s IP address O Use host only networking Connect the guest operating system to a private virtual network on the host puter O Do not use a network connection If your host computer is on a network and you have a separate IP address for your virtual machine or can get one automatically from a DHCP server select Use bridged networking If you do not have a separate IP address for your virtual machine but you want to b
192. des commands to remove a virtual machine from the Favorites list or completely delete the virtual machine You do not need to manipulate files in the host file system to delete a virtual machine To remove a virtual machine or team name from the Favorites list right click the name and choose Remove from Favorites This choice does not affect the virtual machine itself all virtual machine and team files remain intact on the host computer file system e To delete a virtual machine from the host computer right click the name of the virtual machine in the Favorites list and select Delete from Disk or select the virtual machine and choose VM gt Delete from disk VMware Workstation allows you to delete a virtual machine even if it is a member of a team To delete a team itself see Closing a Team on page 305 www vmware com CHAPTER 6 Running VMware Workstation Using Virtual Machine Teams A team is a group of networked virtual machines that act together Power operations are applied to an entire team with startup order and delay time before startup fully configurable for each virtual machine on the team Teams are useful for multitier application development testing demonstration and deployment LAN segments allow you to create private virtual networks for performance testing and security The New Team Wizard guides you through creation of a new team Add virtual machines and LAN segments to deploy a completely priva
193. dows virtual machine take the following steps 1 Be sure you have started the virtual machine and if necessary logged on On the Workstation menus choose VM gt Removable Devices to be sure the virtual machine has access to the CD ROM drive and if needed the floppy drive 2 Insert the installation CD ROM or floppy disk into the proper drive If you are installing from a CD ROM the installation program may start automatically 3 If the installation program does not start automatically click the Windows Start button go to Settings gt Control Panel then double click Add Remove Programs and click the Install button Follow the instructions on screen and in the user manual for your new software Note Some applications use a product activation feature that creates a key based on the virtual hardware in the virtual machine where it is installed Changes in the configuration of the virtual machine may require you to reactivate the software To minimize the number of significant changes set the final memory size for your virtual machine and install VMware Tools before you activate the software Note When you try to run a few programs including the installer for the Japanese language version of Trend Micro Virus Buster Workstation may appear to hang For the workaround to this problem see the following knowledge base article on the VMware Web site at www vmware com info id 30 1 74 www vmware com CHAPTER
194. duct are available By default it checks once a week at the time you launch Workstation You can change the interval for the automatic checks and you can check manually at any time by choosing Help gt Check for Updates on the Web or by clicking Check now in Edit gt Preferences gt Workspace To have VMware Workstation check for updates automatically 1 Choose Edit gt Preferences gt Workspace 2 Onthe Check for software Updates drop down menu set the interval The choices are Never Daily Weekly or Monthly On Linux hosts the Software updates section of the Workspace tab shows the time and result of the most recent automatic check for updates and the time of the next scheduled check To check manually for product updates at any time click Check now Note Checking for product updates works only if the host computer is connected to the Internet 86 www vmware com CHAPTER 4 Learning VMware Workstation Basics Setting Preferences for VMware Workstation The Preferences dialog box allows you to change a number of settings that apply to VMware Workstation itself no matter what virtual machine you are running Note Ona Linux host you must be logged in as root to save global preference changes The settings on the Workspace Input and Hot Keys tabs apply to the user currently logged on to the host computer They do not affect settings made by any other user on the computer The settings on the Display Memory an
195. ducts New Virtual Machine Wizard x Select a Virtual Machine Format Which format would ike to use to create the new virtual machine Virtual machine format O New Workstation 5 Create new vitual machine using the latest format to leverage new features avaiable in Workstation 5 This vitual machine wil not be compatible wih VMware ESX Server 2x GSX Server 3x ACE 1 x or Workstation 4x Olegas Create new virtual machine using legacy format This virtual machine can be used with Workstation 5 but wil operate in legacy mode Itis compatible with VMware ESX Server 2x GSX Server 3x ACE 1 x and Workstation 4 x This screen asks whether you want to create a Workstation 5 virtual machine or a egacy virtual machine See Legacy Virtual Disks on page 268 for more information 7 Select a guest operating system New Virtual Machine Wizard x Select a Guest Operating System Which operating system will be installed on this virtual machine Guest operating system O Novell Netware O Sun Solaris O Other Version Windows 2000 Professional This screen asks which operating system you plan to install in the virtual machine Select both an operating system and a version The New Virtual Machine Wizard uses this information to e Select appropriate default values such as the amount of memory needed e Name files associated with the virtual machine e Adjust settings for optimal performance e Work around special b
196. e Workstation installation and disable the import capability built into Workstation 5 5 125 VMware Workstation 5 User s Manual 126 Virtual Machine Importer Overview The VMware Virtual Machine Importer allows you to import virtual machines from Microsoft Virtual Server and Virtual PC and Symantec LiveState Recovery system images to the following VMware platforms e Workstation 5 0 e Legacy Virtual Machines for example virtual machines compatible with Workstation 4 x GSX Server 3 x ESX Server 2 x and ACE 1 x The importer is a wizard that outputs a completely new VMware virtual machine based on the input virtual machine or system image The newly migrated VMware virtual machine retains the configuration of the original virtual machine or image The migration process is non destructive so you can continue to use the original virtual machine with Virtual PC or the original system image with LiveState Recovery However if you plan to run a new VMware virtual machine on the same network as the original Virtual PC virtual machine you must modify the network name and IP address on one of the virtual machines so the original and new virtual machines can coexist properly Benefits of the Importer The importer lets you convert existing Virtual PC virtual machines and LiveState Recovery system images to VMware virtual machines allowing you to e Avoid reinstalling operating systems and applications for system configu
197. e Notes Virtual Machine Memory Size emory Use on the Host Using More Than 1GB of Memory on a Linux Host Improving Performance for Guest Operating Systems Windows 95 and Windows 98 Guest Operating System Performance Tips Windows 2000 Windows XP and Windows Server 2003 Guest Operating System Performance Tips Windows NT Disk Performance on Multiprocessor Hosts Linux Guest Operating System Performance Tips Disk I O Performance Tips Memory Trimming Page Sharing Special Purpose Configuration Options Locking Out Interface Features Removing a Forgotten Password 420 421 421 422 422 426 429 430 432 432 432 433 433 434 435 435 BWW O oO ON 14 www vmware com Restricting the User In Automatically Returning to a Snapshot with a Restricted User Interface _ Using Full Screen Switch Mode Creating a Virtual Moving a Virtual Machine to the User s Computer erface achine for Use in Full Screen Switch Mode Setting Configuration Options on the User s Computer Starting and Stoppi Guest ACPI S1 Sleep ng Virtual Machines on the User s Computer Glossary Index 460 462 462 463 463 471 477 15 16 www vmware com CHAPTER Introduction and System Requirements This chapter discusses the following topics Product Overview o
198. e Or edit lilo conE In the kernel section add this line append mem 9 59M If you have a 1GB kernel with CONFIG_BIGMEM enabled and have more than 1983MB of memory you can do one of the following 447 VMware Workstation 5 User s Manual 448 e Recompile the kernel as a 2GB kernel by enabling the CONFIG_2GB option and either pass the boot time switch mem 19 83M at the LILO prompt or add it to lilo conf To use the switch e Atthe LILO prompt type Linux 2 2 16xxx mem 1983M e Or edit Lilo conf In the kernel section add this line append mem 1983M e Pass the boot time switch mem 95 9M at the LILO prompt or add it to lilo conf to disable CONFIG_BIGMEM To use the switch e Atthe LILO prompt type linux 2 2 16xxx mem 959M e Or edit lilo conf In the kernel section add this line append mem 959M If you are using a 2GB kernel with CONFIG_BIGMEM enabled and have 1984MB or more memory VMware Workstation does not run You can either pass the boot time switch mem 1983M at the LILO prompt or add it to Lilo conf to disable CONFIG_BIGMEM and thus allow you to run VMware Workstation To use the switch e Atthe LILO prompt type Linux 2 2 16xxx mem 1983M e Or edit Lilo conf Inthe kernel section add this line append mem 1983M www vmware com CHAPTER 15 Performance Tuning Improving Performance for Guest Operating Systems The tips in this section help you make adjustments to improve performance for pa
199. e Performance on page 441 Memory Usage Notes on page 443 Improving Performance for Guest Operating Systems on page 449 Disk I O Performance Tips on page 454 431 VMware Workstation 5 User s Manual 432 Configuring and Maintaining the Host Computer The host computer is an obvious place to look to improve performance This section discusses these key areas e Location of the Working Directory on page 432 e Defragmentation of Disk Drives on page 432 e Adequate Free Disk Space on page 433 e NIC Interrupt Coalescing on page 434 Location of the Working Directory The installer locates the working directory holding the virtual disk files on the host computer You can customize your configuration to place the working directory or the virtual disk files on a different physical computer There may be performance advantages to such customization Defragmentation of Disk Drives Host disks virtual disks and guest disks all affect the performance of VMware Workstation See Defragmenting Virtual Disks on page 215 for the procedures Host Hard Drives Performance is weakened by fragmentation on the physical disk holding the virtual machine s working directory or virtual disk files Fragmentation of the host disk can affect any or all of the following e The files that hold a virtual disk e The files that store newly saved data when you have a snapshot e The files that hold information used in suspending and resuming a vi
200. e Settings Hardware Options Settings Summary Shared folders Windows XP Pro SP2 Name Host folder Status VMware C WMshare Enabled L Shared Folders Enabled Documents C doc Enabled Snapshots B Guest isolation Drag and drop enabled E Advanced Normal Normal Template C Disable Shared Folders a You can add one or more directories to the list Those directories may be on the host computer or they may be network directories accessible from the host computer 176 www vmware com CHAPTER 6 Running VMware Workstation Adding a Shared Folder on a Windows Host To add a shared folder on a Linux host see Adding a Shared Folder on a Linux Host on page 179 1 Choose VM gt Settings 2 Select Options 3 Click Shared Folders 4 Click Add to open the Add Shared Folder Wizard and click Next Add Shared Folder Wizard Welcome to the Add Shared Folder Wizard This wizard will guide you through the steps of dding a new shared folder to your virtual machine 5 Enter a name and location for the shared folder and click Next Add Shared Folder Wizard Name the Shared Folder What would you like to call this shared folder Name Documents Host folder CAdoe e Name This is the name that appears inside the virtual machine e Host folder The path on the host to the directory you want to share Type in the full path or browse to the directory 177 VMware Wor
201. e Windows 2000 Professional Service Pack 3 or 4 Windows 2000 Server Service Pack 3 or 4 Windows 2000 Advanced Server Service Pack 3 or 4 Windows Host Operating Systems 64 Bit e Windows Server 2003 x64 Edition SP1 e Windows XP Professional x64 Edition SP1 Internet Explorer 4 0 or higher is required for the Windows online help system Linux Host Operating Systems Supported distributions and kernels are listed below VMware Workstation may not run on systems that do not meet these requirements Note As newer Linux kernels and distributions are released VMware modifies and tests its products for stability and reliability on those host platforms We make every effort to add support for new kernels and distributions in a timely manner but until a kernel or distribution is added to the list below its use with our products is not supported Look for newer prebuilt modules in the download area of our Web site Go to www vmware com download e Mandrake Linux 10 stock 2 6 3 7 e Mandrake Linux 9 0 stock 2 4 19 e Red Hat Enterprise Linux AS ES WS 4 0 stock 2 6 9 5 64 bit e Red Hat Enterprise Linux 4 0 update 2 beta 64 bit 32 bit e Red Hat Enterprise Linux AS ES WS 3 0 stock 2 4 21 update 2 4 21 15 EL 64 bit e Red Hat Enterprise Linux 2 1 stock 2 4 9 e3 e Red Hat Linux Advanced Server 2 1 stock 2 4 9 e3 e Red Hat Linux 9 0 stock 2 4 20 8 upgrade 2 4 20 20 9 www vmware com CHAPT
202. e able to connect to the Internet select Use network address translation NAT NAT allows you to share files between the virtual machine and the host operating system www vmware com CHAPTER 5 Creating a New Virtual Machine For more details about VMware Workstation networking options see Configuring a Virtual Network on page 325 If you selected Typical as your configuration path click Finish and the wizard sets up the files needed for your virtual machine If you selected Custom as your configuration path continue with the steps below to configure a disk for your virtual machine Select the type of SCSI adapter you want to use with the virtual machine Select 170 Adapter Types Which adapter type would you lke to use 1 0 adapter types IDE Adapte ATAPI SCSI Adapters Buslogid OLSI Logic An IDE and a SCSI adapter are installed in the virtual machine The IDE adapter is always ATAPI You can choose a BusLogic or an LSI Logic SCSI adapter The default for your guest operating system is already selected All guests except for Windows Server 2003 Red Hat Enterprise Linux 3 and NetWare default to the BusLogic adapter The LSI Logic adapter has improved performance and works better with generic SCSI devices The LSI Logic adapter is also supported by ESX Server 2 0 and higher Keep this in mind if you plan to migrate the virtual machine to another VMware product Your choice of SCSI adapter does not affect your dec
203. e disk As a result every SCSI vendor has its own approach to taking the capacity of a SCSI disk and generating a geometry to use for booting www vmware com CHAPTER 8 Using Disks The conversion from a given geometry to an absolute sector number depends on the geometry If you have a disk with a boot sector written by a program running on the host and you try to boot that disk inside a virtual machine the boot program can fail if the host geometry does not match the geometry used by the BusLogic virtual SCSI adapter The symptoms are that you see the first part of the boot loader possibly an LI from LILO for example but then the boot either stops or crashes BusLogic uses the following rules for generating disk geometries Disk size Heads Sectors lt 1GB 64 32 gt 1GB and lt 2GB 128 32 gt 2GB 255 63 In each case the number of cylinders is calculated by taking the total capacity of the disk and dividing by heads sectors Fortunately for sufficiently big disks practically all vendors use 255 heads and 63 sectors Drivers In contrast to IDE adapters SCSI adapters are not interchangeable and cannot all use the same drivers That is if you have an Adaptec SCSI host adapter in your machine and you remove it and replace it with a BusLogic SCSI host adapter your operating system will most likely fail to boot unless you install a BusLogic driver Dual booting from a disk that is also us
204. e following commands chgrp lt newgroup gt dev vmnet0O chmod g rw dev vmneto lt newgroup gt is the group that should have the ability to set vmnet 0 to promiscuous mode If you want all users to be able to set the virtual Ethernet adapter dev vmnet0 in our example to promiscuous mode run the following command on the host operating system as root chmod a rw dev vmnet0 www vmware com CHAPTER 12 Configuring a Virtual Network Understanding NAT Network address translation or NAT provides a simple way for virtual machines to use most client applications over almost any type of network connection available to the host The only requirement is that the network connection must support TCP IP NAT is useful when you have a limited supply of IP addresses or are connected to the network through a non Ethernet network adapter NAT works by translating addresses of virtual machines in a private VMnet network to that of the host machine When a virtual machine sends a request to access a network resource it appears to the network resource as if the request came from the host machine NAT uses the host s own network resources to connect to the external network Thus any TCP IP network resource to which the host has access should be available through the NAT connection The chief advantage of NAT is that it provides a transparent easy to configure way for virtual machines to gain access to network resources
205. e in the Name field Bandwidth A drop down menu of bandwidths for typical network links To change the bandwidth by connection type choose another connection type from the drop down menu 321 VMware Workstation 5 User s Manual 322 e Kbps In this field you can set a custom bandwidth one that is different from the choices in the Bandwidth menu Changes here are overwritten when you make a selection from the Bandwidth menu To change the bandwidth type a number into the field e Packet Loss A specification of the efficiency or faultiness of the link measured in the percentage of packets lost from the total number of packets transmitted To change the packet loss setting type a number into the field Click OK to save your changes Click Cancel to discard your changes Note LAN settings changes are ignored by virtual machines that are currently running Changes to LAN settings become active for a given virtual machine only after that virtual machine is powered on reset or resumed Options To change the name of a team 1 Choose Team gt Settings 2 Click Options Team Settings p Network Team configuration fie CAVitual Machines New Team New Team vmt 3 Type anew name in the Team name field 4 Click OK www vmware com CHAPTER 11 Configuring Teams Command Line for Teams VMware Workstation now includes a command line application for scripting certain operations for t
206. e memory The recommended amount of RAM to specify for all running virtual machines is calculated on the basis of the host computer s physical memory and appears in the reserved memory control Edit gt Preferences gt Memory If you want VMware Workstation to use more or less RAM move this slider to change the amount If you set this value too high the host may thrash when other applications are run on the host If you set this value too low virtual machines may perform very poorly and you cannot run as many virtual machines at once 445 VMware Workstation 5 User s Manual 446 Using Additional Memory By default VMware Workstation limits the number of virtual machines that can run at once based on the amount of memory specified in the application settings This prevents virtual machines from causing each other to perform poorly To allow more or larger virtual machines to run you can adjust a third setting the amount of virtual machine memory that the host operating system may swap to disk To change this setting go to Edit gt Preferences gt Memory and change the additional memory setting Select one of the following radio buttons Fit all virtual machine memory into reserved host RAM Strictly apply the reserved memory limit set in the top of the panel This setting imposes the tightest restrictions on the number and memory size of virtual machines that may run at a given time Because the virtual machine
207. e name c Creates the virtual disk You must use the a s and t options and you must specify the name of the virtual disk lt diskname gt 231 VMware Workstation 5 User s Manual Options and Parameters Description F lt sourcediskname gt Converts the specified virtual disk creating a new virtual disk as a result You must use the t option to specify the disk type to which the virtual disk is converted and you must specify the name of the target virtual disk lt targetdiskname gt Once the conversion is completed and you have tested the converted virtual disk to make sure it works as expected you can delete the original virtual disk file In order for the virtual machine to recognize the converted virtual disk you should use the virtual machine settings editor to remove the existing virtual disk from the virtual machine then add the converted disk to the virtual machine For information on adding virtual disks to a virtual machine see Adding Drives to a Virtual Machine on page 219 x lt n gt GB MB lt diskname gt Expands the virtual disk to the specified capacity You must specify the new larger size of the virtual disk in gigabytes or megabytes You cannot change the size of a physical disk Caution Before running the virtual disk manager utility you should back up your virtual disk files d lt diskname gt Defragments the specified virtual disk You can defr
208. e same performance However IDE disks can be very slow ina guest operating system that either cannot use or is not set to use DMA The easiest way to configure a Linux guest to use DMA for IDE drive access is to install VMware Tools VM gt Install VMware Tools Among other things the installation process automatically sets IDE virtual drives to use DMA In Windows 2000 DMA access is enabled by default In other Windows guest operating systems the method for changing the setting varies with the operating system See the following technical notes for details e Windows NT Disk Performance on Multiprocessor Hosts on page 452 e Windows 95 and Windows 98 Guest Operating System Performance Tips on page 449 When a snapshot exists virtual disks often have very good performance for random or nonsequential access But they can potentially become so fragmented that performance is affected In order to defragment the disk you must first delete the snapshot VM gt Snapshot gt Snapshot Manager gt Delete When no snapshot exists physical disks and virtual disks with all the space allocated in advance both use flat files that mimic the sequential and random access performance of the underlying disk When a snapshot exists and you have made changes since powering on the virtual machine any access to those changed files performs at a level similar to the performance of a virtual disk that does not have all space allocated in advance If y
209. e steps to enable a host virtual adapter on a Windows host l 2 3 4 Go to Edit gt Virtual Network Settings gt Host Virtual Adapters Select the disabled adapter you want to enable Click Enable Click OK Adding a Host Virtual Adapter on a Windows Host Follow these steps to add a host virtual adapter on a Windows host 1 2 3 4 Go to Edit gt Virtual Network Settings gt Host Virtual Adapters Click Add new adapter Choose the virtual network on which you want to use the adapter and click OK Click Apply or OK e Click Apply to enable the adapter without closing the window allowing further configuration changes e Click OK to close the virtual network editor Removing a Host Virtual Adapter on a Windows Host iF Go to Edit gt Virtual Network Settings gt Host Virtual Adapters Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Vitual Adapters DHCP NAT The list below shows which vitual networks have host virtual adapters virtual Ethernet adapters that allow the host computer to connect to the network Network Adapter E work Status vork Adapter VMine BP VMware Network Adapter VMnet8 Enabled oe e J OK Cancel Apply Help Select the adapter you want to remove then click Remove adapter Click OK www vmware com CHAPTER 12 Configuring a Virtual Network Removing a Host Virtual Adapter on a Linux Host 1 Become root and ru
210. e the port You can choose VM gt Removable Devices to disconnect the parallel port from the virtual machine and reconnect it 395 VMware Workstation 5 User s Manual 396 Device Permissions Some Linux distributions by default do not grant the virtual machine access to the 1p and parport devices In most of these cases the owner of the device is root and the associated group is 1p To allow the VMware user to access the device add the user to the associated group To view the owner and group of the device run this command ls la dev parporto The third and fourth columns of the output show the owner and group respectively To add the user to the device group edit the etc group file On the line starting with 1p which defines the 1p group add the VMware Workstation user s user name You must make this change as the root user The following line provides an example for a user whose user name is user lp 7 daemon 1lp userj The next time the user logs on to the host the changes take effect Special Notes for the lomega Zip Drive On Windows 95 or Windows 98 use of older drivers for the lomega Zip drive may cause the guest operating system to lock up intermittently at boot time or during installation of the guest operating system The newest lomega drivers work reliably in our tests They are available at www iomega com software index html www vmware com CHAPTER 14 Connecting Devices Using Serial Ports
211. eams See Command Line Application on page 104 for more information 323 VMware Workstation 5 User s Manual 324 www vmware com CHAPTER 2 Configuring a Virtual Network The first topics in this section give you a quick look at the virtual networking components that VMware Workstation provides and show how you can use them with your virtual machine The rest of the section provides more detail on some networking capabilities and specialized configurations e Network Basics on page 326 e Components of the Virtual Network on page 327 e Common Networking Configurations on page 329 e Custom Networking Configurations on page 333 e Changing the Networking Configuration on page 336 e Advanced Networking Topics on page 346 e Understanding NAT on page 365 e Using Samba with Workstation on page 378 325 VMware Workstation 5 User s Manual 326 Network Basics VMware Workstation provides several ways you can configure a virtual machine for virtual networking e Bridged networking con network separate and u page 329 e Network address transla IP and MAC addresses of figures your virtual machine as a unique identity on the nrelated to its host See Bridged Networking on tion NAT configures your virtual machine to share the the host The virtual machine and the host share a single network identity that is not visible outside the network NAT can be useful when you are allowed a administrator You mi
212. eams VMware Workstation displays teams in a summary view or console view e The summary view is available at any time See Displaying the Summary View on page 76 for more information about the summary view e The console view is available only when a team is powered on The console view displays the team in two areas The main part of the display shows the active virtual machine The area just below the Workstation summary tabs shows thumbnail views of all virtual machines in the team A grab bar allows you to resize the areas S 3 tier Private Network VMware Workstation File Edt View YM Team Windows Help S tier Private Network i movi 7oa Re Clerk Server fa WindowsXP fu Longhorn experimental EuSuSeS2 fi Bp DB Server E Client XP Pro amp My Documents File Edt View Favorites Tools Help x Gry music ry Gry Pictures desktop in E A 3 Floppy A E Local Disk C Config msi Documents and Settir E E Program Fies System Volume Inforr S winoows D DVD CD RW Drive D E GB Control Panel ai i gt Console window for a team Windows host 317 VMware Workstation 5 User s Manual 318 The Active Virtual Machine Team Thumbnails When a team is powered on the team console displays thumbnail views of all team members in a row at the top of the console You may have to scroll the thumbnails to view all your virtual machines on a large team The thumbnails are display
213. eck the Animate windows menus and lists check box Also if you have Show window contents while dragging checked try unchecking that check box www vmware com CHAPTER 15 Performance Tuning Windows 2000 Windows XP and Windows Server 2003 Guest Operating System Performance Tips This section offers advice for configuring a Windows 2000 Windows XP or Windows Server 2003 guest operating system for better performance inside a VMware Workstation virtual machine Note This document pertains to the guest operating system that is running inside a VMware Workstation virtual machine It does not describe actions that should be taken on Windows 2000 Windows XP or Windows Server 2003 running on the host computer Guest Operating System Selection Make certain you have selected the correct guest operating system in the virtual machine settings editor VM gt Settings gt Options VMware Tools Make certain VMware Tools is installed VMware Tools provides an optimized SVGA driver and sets up the VMware Tools service to run automatically when the system starts Among other things the VMware Tools service allows you to synchronize the virtual machine s clock with the host computer s clock which can improve performance for some functions You can install VMware Tools by choosing VM gt Install VMware Tools Visual Effects The fade effects that Windows 2000 Windows XP and Windows Server 2003 use when displaying menus can be somewhat
214. ed Deselect this option to specify that the folder is always enabled 6 Click OK 179 VMware Workstation 5 User s Manual 180 Viewing a Shared Folder Shared folders appear differently depending on the guest operating system The following sections describe viewing shared folders in Windows and Linux guests Note You can use shared folders to share any type of file However Windows shortcuts and Linux symbolic links do not work correctly if you try to use them via shared folders Caution Do not open a file in a shared folder from more than one application at a time For example you should not open the same file using an application on the host operating system and another application in the guest operating system In some circumstances doing so could cause data corruption in the file Viewing Shared Folders in a Windows Guest In a Windows guest operating system you can view shared folders using Windows Explorer Look in My Network Places Network Neighborhood for a Windows NT guest under VMware Shared Folders Note Ifyou have trouble finding a shared folder when using the desktop icon for My Network Places or Network Neighborhood in Windows NT instead open Windows Explorer and look in My Network Places Network Neighborhood The Windows desktop icon does not display an option for Entire Network For example if you specify the name Test files for one of your shared folders you can navigate to it by openin
215. ed as a virtual disk is no different To your operating system it appears that the SCSI card in the machine suddenly changed from whatever you own to an LSI Logic or BusLogic card and your operating system needs to have a corresponding driver installed If that driver is not installed you get a panic a blue screen or some similar fatal error as soon as the boot process tries to switch from the BIOS bootstrap to the disk driver installed in the operating system Operating System Configuration Many operating systems have configuration information that is different for SCSI and IDE drives For example Linux uses dev hd x as the device name for IDE disks and dev sd x for SCSI disks References to these names appear in etc fstab and other configuration files This is one reason that booting a physical IDE disk as a SCSI disk or vice versa does not work well if at all 261 VMware Workstation 5 User s Manual 262 However even when you are dealing only with SCSI devices it is possible for an operating system to encode information in a way that causes problems when you are dual booting For example Solaris names its SCSI disks dev c x t ly d z s0 where the y represents the SCSI ID So if you had a physical disk configured as SCSI ID 3 on the host and as SCSI ID 0 in your VMware Workstation configuration file it would move if you were running Solaris and most likely Solaris would not boot The precise dependencies in vari
216. ed by default for bridged host only and NAT networking e Support for most Ethernet based protocols including TCP IP NetBEUI Microsoft Networking Samba Novell Netware and Network File System e Built in NAT supports client software using TCP IP FTP DNS HTTP and Telnet including VPN support for PPTP over NAT www vmware com CHAPTER 1 Introduction and System Requirements Supported Guest Operating Systems The operating systems listed here have been tested in VMware Workstation 5 virtual machines and are officially supported For notes on installing the most common guest operating systems see the VMware Guest Operating System Installation Guide available from the VMware web site at www vmware com pdt GuestOS_guide pdf or from the Help menu Operating systems that are not listed are not supported for use in a VMware Workstation virtual machine For the most recent list of supported guest operating systems see the following page from the online Workstation 5 documentation on the VMware Web site www vmware com support ws55 doc intro_supguest_ws html Support for 64 Bit Guest Operating Systems Workstation 5 5 introduces full support for virtual machines with 64 bit guest operating systems running on host machines with the following processors e AMD Athlon 64 revision D or later e AMD Opteron revision E or later e AMD Turion 64 revision E or later e AMD Sempron 64 bit capable revision D or later
217. ed in the same order as the team s start up sequence starting on the left with the first virtual machine in the sequence Workstation updates thumbnails in real time to display the actual content of the virtual machine screens The active virtual machine the one appearing in the lower pane of the console is represented by the VMware icon Workstation menus and commands directly affect only the active virtual machine and you can use the mouse and keyboard to interact directly with the active virtual machine Changing the Active Virtual Machine Click a thumbnail of a virtual machine to make the virtual machine active The virtual machine you clicked appears in the lower pane of the console and its thumbnail becomes the VMware icon Using Full Screen with Teams In full screen mode Workstation displays only the active virtual machine See Using Full Screen Mode on page 168 www vmware com Editing Team Settings To review or change team properties choose Team gt Settings You can configure the virtual machines in the team review the team LAN segments or rename the team using the following tabs e Connections e Virtual Machines e LAN Segments e Options Connections To review and configure network connections 1 Choose Team gt Settings 2 Click Connections Team Settings Cent 001 lent 002 From this tab you can review the virtual machine name and the network and LAN segment associations for e
218. ed in the guest For best performance use the same number of colors in the guest and on the host Changing Screen Color Depth on the Host f you choose to change the color settings on your host operating system you should first shut down all guest operating systems power off the virtual machines and close VMware Workstation Follow standard procedures for changing the color settings on your host operating system then restart VMware Workstation and the virtual machines 380 www vmware com CHAPTER 13 Configuring Video and Sound Changing Screen Color Depth in the Virtual Machine f you choose to change the color settings in the guest operating system the approach you take depends on the guest operating system Follow the normal process for changing screen colors in your guest operating system n a Windows guest the Display Properties control panel offers only those settings hat are supported na Linux or FreeBSD guest you must change the color depth before you start the X server or restart the X server after making the changes 381 VMware Workstation 5 User s Manual 382 Using Full Screen Mode on a Linux Host When you switch to full screen mode VMware Workstation changes the full screen display resolution to better match the resolution set in the guest operating system On a Linux host VMware Workstation uses the VidMode or DGA2 extension from the XFree86 Project or XiG s Xfs to match the host reso
219. ed on one line Use the s switch to pass a variable name and value to be used in configuring the lt rtual machine You may include multiple variable value pairs in the command Each variable value pair must be preceded by s Use name lt alias gt to give a name to the virtual machine You can the use that alias in switchto and poweroff commands Use directkey lt keyspec gt to specify the virtual machine s direct switch key If a direct switch key is specified in the virtual machine s configuration file the one specified on the command line overrides the one in the configuration file For example to start a virtual machine and specify that its direct switch key combination is Ctrl Shift F1 use the following command vmware fullscreen poweron directkey 0x70 0x6 lt config file gt The complete command must be entered on one line Use fullscreen to start a virtual machine and go straight to full screen switch mode The virtual machine takes over the display immediately instead of running invisibly until the user switches to it later 467 VMware Workstation 5 User s Manual 468 Starting a Virtual Machine vmware fullscreen poweron lt config file gt Use this command to power on the virtual machine without passing any additional information to the virtual machine Provide the full path to the virtual machine s configuration vmx file The user sees no immediate indication that the virtual m
220. ed wiping VMware Tools reclaims all unused portions of disk partitions such as deleted files and prepares them for shrinking Wiping takes place in the guest operating system e The second step is the shrinking process itself which takes place on the host Workstation reduces the size of the disk s files by the amount of disk space reclaimed in the wipe process When a virtual machine is powered on you shrink its virtual disks from the VMware Tools control panel You cannot shrink virtual disks if a snapshot exists To remove the snapshot if one exists choose VM gt Snapshot gt Snapshot Manager gt Delete See Unsupported and Disabled Partitions on page 218 In a Linux or FreeBSD guest operating system to prepare virtual disks for shrinking you should run VMware Tools as the root user This way you ensure the whole virtual www vmware com CHAPTER 8 Using Disks disk is shrunk Otherwise if you shrink disks as a nonroot user you cannot wipe the parts of the virtual disk that require root level permissions To shrink a virtual disk 1 Launch the control panel e Windows guest double click the VMware Tools icon in the system tray or choose Start gt Settings gt Control Panel then double click VMware Tools e Linux or FreeBSD guest become root su then run vmware toolbox 2 Click the Shrink tab vmware Tools Properties x Options Devices Scripts Shared Folders Shrink About Select
221. ehaviors and bugs within a guest operating system If the operating system you plan to use is not listed select Other for both guest operating system and version 117 VMware Workstation 5 User s Manual 118 Note Workstation supports 64 bit guest operating systems only in Workstation versions 5 5 and later and only on host machines with supported processors For the list of processors Workstation supports for 64 bit guest operating systems see Support for 64 Bit Guest Operating Systems on page 37 Caution Do not attempt to install a 64 bit operating system after selecting a 32 bit guest operating system type here The remaining steps assume you plan to install a Windows XP Professional guest operating system You can find detailed installation notes for this and other guest operating systems in the VMware Guest Operating System Installation Guide available from the VMware Web site or from the Help menu Select a name and folder for the virtual machine New Virtual Machine Wizard Name the Virtual Machine What name would you like to use for this vitual machine Vitual machine name Windows XP Professional Location C Documents and Settings user My Documents My Virtual Mac Browse The name specified here is used if you add this virtual machine to the VMware Workstation Favorites list This name is also used as the name of the folder where he files associated with this virtual machine are stored
222. el EM64T 30 Intel EM64T processor supported for 64 bit guest 37 lomega parallel port Zip drives 396 IP address assigning 349 clone 295 in virtual machine 120 static 347 IP forwarding 351 IP packet forwarding disabling 350 ISO image file 35 226 229 K Kbps for LAN segment 322 Kernel reconfiguring Workstation after Linux kernel upgrade 57 Key code mapping 411 Keyboard mapping on a Linux host 409 sending input to virtual machine 89 shortcuts 107 USB 421 Keysym defined 410 481 482 mapping 412 Knowledge base 41 KT 958 121 257 L LAN segment changing name 321 New Team Wizard 303 setting bandwidth 303 321 setting Kbps 322 setting packet loss 322 Launch virtual machine 159 Leak P packets in a virtual machine 351 P packets in host only network 350 LILO 242 245 258 Lin symbolic link does not work in shared folder 180 nked clone 291 parent 296 parent as template 297 snapshot 296 emplate mode 297 Li Linux installing on Linux host 54 supported 32 bit guest operating systems 39 supported 64 bit guest operating systems 39 supported host operating systems 32 uninstalling Workstation on Linux host 58 upgrading on Linux host 66 VMware Tools for 142 LiveState Recovery system image importing 125 LiveState system image importing 125 Location of virtual machine files 159 Lock files 214 Lockout for some interface features 457 Log files 469 LSI Logic 35 121 257 422 427
223. eld Type your changes When your cursor leaves the field Workstation verifies your entry for length duplicate names and invalid characters Note Pressing Esc accepts any edit in progress and closes the snapshot manager without confirmation 281 VMware Workstation 5 User s Manual The Snapshot Manager Window The following figures show the elements of the snapshot manager window These elements are described in the following sections e Snapshot Tree on page 283 e Details Region on page 283 e Command Buttons on page 284 e Navigation Region on page 284 e You Are Here Icon on page 284 Bl vm011 70a Snapshot Manager m G G vo1170a Test case 1 Test Case 2 Test case 3 Snapshot tree You Are Here icon Thumbnail of selected snapshot s display i gt Snapshot created 2 14 2005 3 54 51 AM il Name Test Case 3 Fal Details Deste mg s Command buttons The snapshot manager Windows host a 8 amp Q A Command toolbar Take Snapshot Delete Clone Zoomin Zoom Out _I gt A gt You Are Here icon PAA Snapshot tree Snapshot created Thu 03 Feb 2005 07 18 33 PM PST Name Snapshot for xppro3 Details Eakin W Hep GoTo x Close Thumbnail of selected snapshot s display L The snapshot manager Linux host 282 www vmware com CHAPTER 9 Preserving the State of a Virtual Machine Snapshot Tree The snapshot tree shows al
224. en made Full screen switch mode affects the way VMware Workstation itself runs and as a result affects all virtual machines These options are available on Windows hosts only www vmware com CHAPTER 16 Special Purpose Configuration Options Locking Out Interface Features Administrative lockout is a global setting that affects all virtual machines for all users ona host computer It allows a user to impose any combination of the following restrictions e Only a user who knows the password can create new virtual machines e Only a user who knows the password can edit virtual machine configurations e Only a user who knows the password can edit network settings Note If no user has yet set administrative lockout preferences any user may set them and set a password for access to the administrative lockout features If any user has already set administrative lockout preferences you must know the password in order to change the settings Take the following steps to set administrative lockout preferences 1 Open the Application Settings dialog box Edit gt Preferences 2 Click the Lockout tab If a password is already set for the administrative lockout feature enter the password when prompted Preferences fx Workspace Input Hot Keys Display Memory Priority Lockout Z Enable administrative lockout Select the actions to lock then enter a password in both fields Users must provide this password when perform
225. en running In general the first suspend operation takes a bit longer than later suspend operations do When you suspend a virtual machine a file with a vmss extension is created This file contains the entire state of the virtual machine When you resume the virtual machine its state is restored from the vmss file To suspend a virtual machine 1 If your virtual machine is running in full screen mode return to window mode by pressing the Ctrl Alt key combination 2 Click Suspend on the VMware Workstation toolbar 3 When VMware Workstation has completed the suspend operation it is safe to exit VMware Workstation File gt Exit Windows or File gt Quit Linux To resume a virtual machine that you have suspended 1 Start VMware Workstation and choose a virtual machine you have suspended 2 Click Resume on the VMware Workstation toolbar Note that any applications you were running at the time you suspended the virtual machine are running and the content is the same as it was when you suspended the virtual machine www vmware com CHAPTER 9 Preserving the State of a Virtual Machine Using Snapshots VMware Workstation snapshots allow you to preserve the state of the virtual machine so you Can return to the same state repeatedly Version 5 introduces multiple snapshots and the snapshot manager This section discusses snapshots in the following topics e Understanding Snapshots on page 274 e Examples of Using Sna
226. ent sec VMware PUBS P Network Packets Sent sec VMware PUBS XP Percent Guest Physical Mem i VMware PUBS XP Percent Guest Physical Mem Windows VMware PUBS XP v For more information about using the Performance console choose Action gt Help in the Performance console or go to the Microsoft Web site www vmware com CHAPTER 15 Performance Tuning Memory Usage Notes VMware Workstation allows you to make the following memory related settings e The memory size of a particular virtual machine The amount of the host computer s RAM that can be used for virtual machines e The extent to which you want to allow the host operating system s memory manager to swap virtual machines out of physical RAM By adjusting these three settings you can affect both virtual machine and overall system performance This section describes how VMware Workstation uses the memory configuration parameters to manage virtual machines and system memory properly Virtual Machine Memory Size The first configuration parameter you can set is the size of an individual virtual machine s memory Set this configuration parameter for the virtual machine in the virtual machine settings editor VM gt Settings gt Memory The guest memory size should not be set lower than the minimum recommendations of the operating system provider The New Virtual Machine Wizard sets reasonable defaults for the memory size of a virtual
227. entium M including computers with Centrino mobile technology Xeon including Prestonia EM64T e AMD Athlon Athlon MP Athlon XP Athlon 64 Duron Opteron Turion 64 e Experimental support for AMD Sempron For additional information including notes on processors that are not compatible see the VMware knowledge base at www vmware com support kb enduser std_adp php p_faqid 967 Multiprocessor systems supported AMD Opteron AMD Athlon 64 AMD Turion 64 AMD Sempron Intel EM64T support for 64 bit guest operating systems is available only on the following specific versions of these processors e AMD Athlon 64 revision D or later e AMD Opteron revision E or later e AMD Turion 64 revision E or later e AMD Sempron 64 bit capable revision D or later experimental support e Intel EM64T VT capable processors experimental support www vmware com CHAPTER 1 Introduction and System Requirements Memory e 128 MB minimum 256 MB recommended You must have enough memory to run the host operating system plus the memory required for each guest operating system and for applications on the host and guest See your guest operating system and application documentation for their memory requirements Display e 16 bit or 32 bit display adapter recommended Disk Drives Guest operating systems can reside on physical disk partitions or in virtual disk files Hard Disk e IDE and SCSI hard drives
228. ependent disks are not included in snapshots You have the following options for an independent disk e Persistent changes are immediately and permanently written to the disk e Nonpersistent changes to the disk are discarded when you power off or revert to a snapshot When you have set the filename and location you want to use and have made any selections you want to make on the advanced settings screen click Finish 7 Begin using your virtual machine Known Issues and Background Information on Using SCSI Physical Disks Size VMware Workstation supports physical disk sizes up to 2 0TB Reported size is not accurate with larger physical disks Geometry In some cases it is not possible to boot a physical SCSI drive inside a virtual machine because the SCSI adapter in the physical computer and the BusLogic adapter in the virtual machine describe the drive in different ways The virtual machine might hang during the boot VMware Workstation might crash or VMware Workstation might fail with an ASSERT or other error message This problem is most likely to affect smaller drives less than 2GB In order to share the same BIOS interface used by IDE disks which is required in order to boot all SCSI disks need to have a geometry which is a fabricated value for the number of cylinders sectors and heads on the disk In fact a SCSI disk appears to a computer as a single flat entity from sector 1 up to the highest sector on th
229. er checks for the presence of a version 4 license on the computer If it finds no version 4 license it prompts you to enter your version 4 serial number 4 Reboot your computer Removing Version 3 1 Launch the VMware Workstation uninstaller Start gt Programs gt VMware gt VMware Workstation Uninstallation 2 Click Yes 3 Follow the on screen instructions You need to keep your existing license in the Windows registry After you reboot follow the instructions in Installing VMware Workstation 5 on a Windows Host on page 47 65 VMware Workstation 5 User s Manual Upgrading on a Linux Host You may upgrade from version 4 to version 5 using the upgrade version of VMware Workstation 5 To upgrade from version 3 to version 5 you must have the full version of VMware Workstation 5 Upgrades from earlier versions of VMware Workstation are not supported Note When you are upgrading with the upgrade product the installer checks for the presence of a license on the computer If it finds no license it prompts you to enter your previous version serial number Note Starting with Workstation 5 Samba is no longer automatically configured when you run vmware config pl The tar Upgrade Process If you used the tar installer to install version 3 or 4 or an earlier release of version 5 and you plan to use the tar installer for version 5 you do not need to take any special steps to uninstall the older version Just follow
230. er k myDisk vmdk Remember you cannot shrink a virtual disk if you allocated all the disk space when you created the virtual disk You cannot shrink a physical disk If the virtual disk has any snapshots you cannot shrink the virtual disk You must delete all snapshots before you shrink the virtual disk www vmware com CHAPTER 8 Using Disks Configuring a Dual Boot Computer for Use with a Virtual Machine Many users install VMware Workstation on a dual boot or multiple boot computer so they can run one or more of the existing operating systems in a virtual machine If you are doing this you may want to use the existing installation of an operating system rather than reinstall it in a virtual machine To support such installations VMware Workstation makes it possible for you to use a physical IDE disk or partition also known as a physical disk inside a virtual machine Note VMware Workstation supports booting from physical disk partitions only on DE drives Booting guest operating systems from physical SCSI drives is not supported For a discussion of the issues on a Linux host see Configuring Dual or ultiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host on page 257 Setting up a physical disk configuration for a virtual machine is more complicated than using a virtual disk Virtual disks are recommended unless you have a specific need to run directly from a physical disk or partition Caution phys
231. er 2003 physical disk configuration in a production environment e Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 e Running a Windows 2000 Windows XP or Windows Server 2003 Virtual Machine from an Existing Multiple Boot Installation on page 252 e Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 Windows XP Caution Running a Windows XP guest from a physical disk is not supported You should not test a Windows XP physical disk configuration in a production environment e Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 e Running a Windows 2000 Windows XP or Windows Server 2003 Virtual Machine from an Existing Multiple Boot Installation on page 252 e Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 Windows 2000 e Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 e Running a Windows 2000 Windows XP or Windows Server 2003 Virtual Machine from an Existing Multiple Boot Installation on page 252 e Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 Windows NT e Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 239 VMware Workstation 5 User s Manual 240 Windows 98 e Configuring Dual or Multiple Boot Systems to Run with Workstation on p
232. erating system use the guest operating system s tools to format them Caution After you create a physical disk using one or more partitions on a physical disk you should never modify the partition tables by running fdisk ora similar utility in the guest operating system Note Ifyouuse fdisk ora similar utility on the host operating system to modify the partition table of the physical disk you must recreate the virtual machine s physical disk 225 VMware Workstation 5 User s Manual 226 Adding DVD or CD Drives to a Virtual Machine You can add one or more DVD or CD drives to your virtual machine You can connect the virtual machine s drive to a physical drive on the host machine or to an ISO image file You can configure the virtual DVD or CD drive as either IDE or SCSI no matter what kind of physical drive you connect it to In other words if your host computer has an IDE CD drive you can set up the virtual machine s drive as either SCSI or IDE and connect it to the host s drive The same is true if the host s physical drive is a SCSI drive Adding a DVD or CD Drive ile Open the virtual machine settings editor VM gt Settings and click Add to start the Add Hardware Wizard Click DVD CD ROM Drive then click Next Select Use physical drive if you want to connect the virtual machine s drive to a physical drive on the host computer Select Use ISO Image if you want to connect the virtual machine s drive to an ISO
233. ere is a system tray icon called Eject Hardware on Windows 2000 and Safely Remove Hardware on Windows XP and Windows Server 2003 Use this icon to disconnect the device from the host before connecting it to a virtual machine Device Control on a Linux Host On Linux hosts guest operating systems can use devices that are not already in use by the host that is devices that are not claimed by a host operating system driver If your device is in use by the host and you try to connect it to the guest using the VM gt Removable Devices menu a dialog box appears informing you that there is a problem connecting to the device To disconnect the device from the host you must unload the device driver You can unload the driver manually as root su using the rmmod command Or if the driver was automatically loaded by hotplug you can disable it in the hotplug configuration files in the etc hotplug directory See your Linux distribution s documentation for details on editing these configuration files www vmware com CHAPTER 14 Connecting Devices A related issue sometimes affects devices that rely on automatic connection as PDAs often do If you have successfully used autoconnection to connect the device to your virtual machine then experience problems with the connection to the device take the following steps 1 Disconnect and reconnect the device You can either unplug it physically then plug it back in or use the V
234. erly installed you can find the VMware Workstation build number by running rpm qa grep VM Uninstalling a tar Installation of Workstation If you used the tar installer to install VMware Workstation remove the software from your system by running vmware uninstall pl www vmware com CHAPTER 2 Installing VMware Workstation Where to Go Next e Learning VMware Workstation Basics on page 71 e Creating a New Virtual Machine on page 113 e Running VMware Workstation on page 157 59 VMware Workstation 5 User s Manual 60 www vmware com CHAPTER Upgrading VMware Workstation This chapter discusses how to upgrade VMware Workstation 3 or 4 on your Linux or Windows host system and how to use existing virtual machines under VMware Workstation 5 e Preparing for the Upgrade on page 62 e Upgrading on a Windows Host on page 65 e Upgrading on a Linux Host on page 66 e Using Workstation 4 Virtual Machines in Workstation 5 on page 67 61 VMware Workstation 5 User s Manual Preparing for the Upgrade Before You Install VMware Workstation 5 There are a few steps you should take while your previous version of VMware Workstation is still on your computer and before you install VMware Workstation 5 o ensure the best possible upgrade experience Resume and Shut Down Suspended Virtual Machines f you plan to use virtual machines created in an earlier version of VMware Workstation 5 be sure they have been shut
235. ers are added to the configuration of your host operating system one that allows the host to connect to the host only network and one that allows the host to connect to the NAT network If you are not using a virtual network adapter you may wish to remove it On a Windows host you can also choose to disable an adapter The presence of virtual network adapters has a slight performance cost because broadcast packets must go to the extra adapters On Windows networks browsing your network may be slower than usual And in some cases these adapters interact with the host computer s networking configuration in undesirable ways Disabling a Host Virtual Adapter on a Windows Host Use the virtual network editor to disable any unwanted adapters 1 Choose Edit gt Virtual Network Settings 2 Click Host Virtual Adapters Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT The list below shows which virtual networks have host virtual adapters virtual Ethemet adapters k that allow the hast computer to connect to the netwot Network Adapter Virtual Network Status VMware Network Adapter VMnetl e HP VMware Network Adapter VMnet8 Enabled OK Cancel Apply Help 3 Select the adapter you want to disable 4 Click Disable 5 Click OK 343 VMware Workstation 5 User s Manual 344 Enabling a Disabled Host Virtual Adapter on a Windows Host Follow thes
236. erver 2003 Show the logfile Importing a Virtual Machine or System Image from the Command Line To import a virtual machine or system image from the Windows command line use the following syntax v2vapp sourceVMimagepath targetVMname targetVMpath options The following table shows the options available Option Name Description a auto Launch the virtual machine after migration f fast Share the virtual disk of the virtual machine or system image This option requires Workstation 5 IXxx log Write the logfile to xxx 133 VMware Workstation 5 User s Manual 134 Troubleshooting the Importer This section describes known issues with the importer Importer Installation Issues Importer Installation Wizard Interrupted Installation can fail with a message saying that the installation was interrupted The following are possible workarounds e Verify that you do not have a previous installation of the importer If you have a previous installation of the importer use the Add Remove Programs control panel to remove the previous installation Remove any references to Virtual Machine Importer from the registry entry HKEY_LOCAL_MACHINE SOFTWARE VMware Inc e Delete any previous failed installation source files or folders from your Temp directory or move the Temp directory to another folder during the installation Virtual Machine Migration Issues Changes to Virtual
237. es grow in size to a maximum of 2GB each If you specify that all space should be allocated when you create the disk these files start at the maximum size and do not grow Almost all of a vmdk file s content is the virtual machine s data with a small portion allotted to virtual machine overhead If the virtual machine is connected directly to a physical disk rather than to a virtual disk the vmdk file stores information about the partitions the virtual machine is allowed to access Earlier VMware products used the extension dsk for virtual disk files lt diskname gt lt gt vmdk This is a redo log file created automatically when a virtual machine has one or more snapshots This file stores changes made to a virtual disk while the virtual machine is running There may be more than one such file The indicates a unique suffix added automatically by VMware Workstation to avoid duplicate file names vmem lt uuid gt vmem The virtual machine s paging file which backs up the guest main memory on the host file system This file exists only when the virtual machine is running or if the virtual machine has crashed lt snapshotnameandnumber gt Each snapshot of a virtual machine that is powered on has an associated vmem file which contains the guest s main memory saved as part of the snapshot vmsd lt vmname gt vmsd This is a centralized file for storing info
238. es not import all of them Workaround Remove the default audio controller or another virtual PCI device you don t require before you import a virtual machine or system image with the importer Virtual Machine or System Image Shared Folder Settings Not Migrated The importer does not support the migration of shared folders Workaround Recreate shared folders in your VMware virtual machine after migration Windows NT4 Ethernet Adapter Not Migrated Correctly If your virtual machine or system image does not have an AMD PCnet PCI Il compatible Ethernet adapter it can migrate improperly Workaround After you import a Windows NT4 virtual machine install a new virtual Ethernet adapter and then install VMware Tools Failed to Impersonate Client After you select the vmc or sv2i file the wizard could finish with the error Failed to impersonate client before deleting drive letter Workaround Not available No Keyboard or Mouse in Imported Virtual Machine After you import a virtual machine or system image to VMware the mouse and keyboard do not work in the new machine The mouse and keyboard are not available in the guest operating system but they are available in the BIOS Workaround Reset the virtual machine Importer Reports Error When Converting Virtual PC Disk Files with Duplicate Names During the import process the importer writes all the Virtual PC disk files to the same target folder If the Virtual PC v
239. et1 Make sure the Samba password file includes entries for all users of the virtual machine who will access the host s file system The user names and passwords in the Samba password file must match those used for logging on to the guest operating system You may add user names and passwords to the Samba password file at any time from a terminal window on your Linux host computer 1 Logon to the root account su 2 Run the Samba password command smbpasswd a lt username gt lt username s is the user name to add Follow the instructions on the screen 3 Log out of the root account exit Using a Samba Server for Both Bridged and Host Only Networks To use your Samba server for both host only and bridged networking you must modify one parameter in the smb conf file You can define the interface parameter so your Samba server serves multiple interfaces An example of this is interface eth0 vmnetl This example tells the Samba server to listen to and use both the etho and vmnet1 interfaces the interfaces used by bridged and host only networking respectively Using Samba without Network Access To make Samba inaccessible from your physical Ethernet interface add this line interfaces vmnet to etc samba smb conf and restart Samba www vmware com CHAPTER Configuring Video and Sound The following sections provide information on configuring the video display and sound for VMware Workstation e Sett
240. etworks add and remove adapters and more a VMneti Host only private network shared with the ho E VMnet2 Bridged Bridged to Realtek RTL8139 Family PCI Enabled 2 VMnetB NAT Used to share the host s IP address 192168400 Enabled By default the VMneto virtual network is set up in bridged mode and bridges to one of the active Ethernet adapters on the host computer 2 Click the Automatic Bridging tab 338 www vmware com CHAPTER 12 Configuring a Virtual Network 3 Check the box for Automatically choose an available physical adapter Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT ay Use this page to control the automatic bridging of VMnet0 to the first available physical Ethemet adapter on the host Automatic bridging m omaicaly choose an avaiable physical network adapter t badge ta VidnetO Excluded adapters Do not attempt to automatically bridge to the folowing adapters On host systems with more than one physical Ethernet adapter installed the choice of which adapter Workstation uses is arbitrary If you want to place restrictions on the choice see the following section Excluding a Host Ethernet Adapter from VMnet0 Bridged Networking 4 Click OK to save your changes and close the virtual network editor Excluding a Host Ethernet Adapter from VMnet0 Bridged Networking You can exclude a host Ethernet adap
241. evant applications and hardware as you can 43 VMware Workstation 5 User s Manual Where to Go Next e Installing VMware Workstation on page 45 e Upgrading VMware Workstation on page 61 44 www vmware com CHAPTER Installing VMware Workstation This chapter discusses how to install VMware Workstation on your Linux or Windows host system Selecting Your Host System on page 46 e Upgrading from Previous Versions on page 46 Installing VMware Workstation 5 on a Windows Host on page 47 e Installing Workstation on a Windows Host on page 48 e Installing VMware Workstation Silently on page 51 e Uninstalling VMware Workstation 5 on a Windows Host on page 53 Installing VMware Workstation 5 on a Linux Host on page 54 e Before Installing on a Linux Host on page 55 e Installing Workstation on a Linux Host on page 55 e Configuring with vmware config p on page 57 e Web Browser Required on page 58 e Uninstalling VMware Workstation 5 on a Linux Host on page 58 45 VMware Workstation 5 User s Manual 46 Selecting Your Host System VMware Workstation is available for both Windows and Linux host computers The installation files for both host platforms are included on the same CD ROM Your serial number allows you to use VMware Workstation only on the host operating system for which you licensed the software If you have a serial number for a Windows host you cannot run the software on a Linu
242. evice include e Adriver for that device is not installed on the host e Adriver on the host prevents the device from being detected e The virtual machine uses a device for which there are no drivers available to the host operating system Before you attempt the steps below first verify whether the device driver is installed on the host If the driver is not installed install it then see if the device appears correctly to Workstation If it does not appear correctly or if you cannot or do not want to install the driver on the host then you need to add the device manually to the virtual machine When adding a device manually to the virtual machine use scsiX Y notation to refer to the device on the host instead of a device name Workstation uses like CdRom0 For this type of notation X is the SCSI bus on which the device is located on the host and Y is the target ID the device uses on the host Caution Adding a device in this manner is recommended for advanced users only Caution Before you add the device you must disable the original SCSI device driver on the host Some Windows operating systems do not process the send command from the adapter if the device driver is owning the device There are a few circumstances requiring you to add or configure the device manually Follow the steps that match your circumstance In each case power off the virtual www vmware com CHAPTER 14 Connecting Devices machine and then
243. ew locations on the same host computer or to different host computers By default virtual disks start as small files on the host computer s hard drive then expand as needed up to the size you specify in the next step The next step also allows you to allocate all the disk space when the virtual disk is created if you wish To use an existing operating system on a physical hard disk a raw disk read Configuring a Dual Boot Computer for Use with a Virtual Machine on page 237 To install your guest operating system directly on an existing IDE disk partition read the reference note Installing an Operating System on a Physical Partition from a Virtual Machine on page 263 Note Physical disk configurations are recommended only for expert users Caution If you are using a Windows Server 2003 Windows XP or Windows 2000 host see Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 To install the guest operating system on a IDE physical disk select Existing IDE Disk Partition To use a SCSI physical disk add it to the virtual machine later with the virtual machine settings editor Booting from a SCSI physical disk is not supported For a discussion of some of the issues involved in using a SCSI physical disk see Configuring Dual or Multiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host on page 257 122 www vmware com 15 CHAPTER 5 Creating a New Vi
244. ew mode should not impair the settings for the host resolution www vmware com CHAPTER 13 Configuring Video and Sound Experimental Support for Direct3D VMware Workstation includes experimental support for Direct3D video acceleration This feature is not fully functional Caution Features with experimental support are not intended to be enabled on production systems Enabling 3 D acceleration may cause the host or guest to crash causing you to lose data even if 3 D applications are not active Note To take advantage of the experimental 3 D capabilities of Workstation the virtual machine must be running the version of VMware Tools that corresponds to the version of Workstation you are using to run it So a virtual machine running on Workstation 5 0 must be running the version of VMware Tools provided with Workstation 5 0 A virtual machine running on Workstation 5 5 must be running the version of VMware Tools provided with Workstation 5 5 If you move the virtual machine and want to use the 3 D capabilities be sure you have the correct version of VMware Tools installed Experimental support for Direct3D acceleration is described in the following sections e Audience for Direct3D Experimental Support on page 383 e Accelerated 3 D Limitations on page 384 e Enabling Accelerated 3 D on page 384 e Known Issues on page 387 e Helping VMware with Experimental Support on page 388 Audience for Direct3D Experimental Support Workstation
245. experimental support e Intel EM64T VT capable processors experimental support Workstation supports virtual machines with 64 bit guest operating systems only on host machines that have one of the supported 64 bit processors When you power on a virtual machine with a 64 bit guest operating system Workstation performs an internal check if the host CPU is not a supported 64 bit processor you cannot power on the virtual machine VMware also provides a standalone utility that you can use without Workstation to perform the same check and determine whether your CPU is supported for Workstation virtual machines with 64 bit guest operating systems You can download the 64 bit processor check utility from the VMware web site at www vmware com download Workstation supports virtual machines with 64 bit guest operating systems only in versions 5 5 and later If your version of Workstation is 5 0 or earlier you must upgrade to version 5 5 or later for 64 bit guest operating system support A virtual machine created in Workstation version 5 5 with a 64 bit operating system cannot be powered on or resumed in Workstation versions 5 0 and earlier Also virtual machines with 64 bit operating systems are not supported for VMware products other than Workstation 37 VMware Workstation 5 User s Manual Microsoft Windows 32 Bit Experimental support for Windows Vista Windows Server 2003 Web Edition Standard Edition Enterprise Edition Small Bus
246. eysym mapping table in lt ile paths A table is a sequence of configuration lines of the form lt sym gt lt v scan code gt where lt sym gt is an X keysym name and lt v scan code gt is a C syntax hexadecimal number for example 0x001 See the explanation of xkeymap keysym above for tips on finding the keysyms and v scan codes for your keyboard Compiling a complete keysym mapping is difficult It is best to start with an existing table and make small changes 412 www vmware com V Scan Code Table These are the v scan codes for the 104 key U S keyboard Symbol Shifted symbol Location V scan code Esc 0x001 1 0x002 2 0x003 3 0x004 4 0x005 5 0x006 6 0x007 7 amp 0x008 8 i 0x009 9 0x00a 0 0x00b a 0x00c 0x00d Backspace 0x00e Tab Ox00f Q 0x010 0x011 0x012 R 0x013 Mt 0x014 Y 0x015 U 0x016 0x017 O 0x018 P 0x019 0x01a 0x01b Enter 0x01c Ctrl left 0x01d CHAPTER 14 Connecting Devices 413 VMware Workstation 5 User s Manual Symbol Shifted symbol Location V scan code A Ox01e S 0x01f D 0x020 0x021 G 0x022 H 0x023 J 0x024 0x025 L 0x026 0x027 i 0x028 0x029 Shift left 0x02a 0x02b Z Ox02c X 0x02d C 0x02e V 0x02f B 0x030 N 0x031 M 0x032 g lt 0x033
247. f button to turn off a virtual machine or team in two ways e You can set the Power Off button to work as a power switch works on a power supply The virtual machine is abruptly powered off with no consideration for work in progress Caution If a virtual machine is writing to disk when it receives a Power Off command data corruption may occur e You can also set the Power Off button to send a shut down signal to the guest operating system An operating system that recognizes this signal shuts down gracefully Note Not all guest operating systems respond to a shut down signal from this button If your operating system does not respond to a shut down signal shut down from within the operating system as you would with a physical machine For instructions on configuring the Power Off button see Power Controls in the section Power on page 96 www vmware com CHAPTER 6 Running VMware Workstation Resetting a Virtual Machine As with physical computers you may need to reset a guest operating system that has become unresponsive This is generally not recommended If you reset a virtual machine while the virtual disk is being written to data may be lost or corrupted To reset a virtual machine click the Reset button on the toolbar Reset vs Restart You can configure the Reset button to reset or restart a virtual machine or team e You can set the Reset button to work as a reset switch so that it resets the virtual mach
248. f it cannot remove the lock a stale lock file is left protecting the vmdk file For example if the host machine crashes before the virtual machine has a chance to remove its lock file a stale lock remains If a stale lock file remains when the virtual machine is started again the virtual machine tries to remove the stale lock To make sure that no virtual machine could be using the lock file the virtual machine checks the lock file to see if 1 The lock was created on the same host where the virtual machine is running 2 The process that created the lock is not running If those two conditions are true the virtual machine can safely remove the stale lock If either of those conditions is not true a dialog box appears warning you that the virtual machine cannot be powered on If you are sure it is safe to do so you may delete the lock files manually On Windows hosts the filenames of the lock files end in Lek On Linux hosts the filenames of the lock files end in WRITELOCK Physical disk partitions are also protected by locks However the host operating system is not aware of this locking convention and thus does not respect it For this www vmware com reason VMware strongly recommends that the physical disk for a virtual machine not be installed on the same physical disk as the host operating system Defragmenting Virtual Disks Like physical disk drives virtual disks can become fragmented Defragmenti
249. f the configuration file depends on the Linux distribution you are using When you reboot the host after removing this line the configuration file no longer starts the 1p module To ensure that the proper modules for the parallel port are loaded at boot time add this line to the etc modules conf or etc conf modules file alias parport_lowlevel parport_pc Linux kernels in the 2 4 x series also use a special arbitrator that allows access to the parallel port hardware If the parallel port is in use by the host the guest cannot use it If a virtual machine is using the parallel port the host and any users accessing the host are not given access to the device VMware Workstation puts a lock on the device and this lock restricts access so only the virtual machine can use the port www vmware com CHAPTER 14 Connecting Devices You can choose VM gt Removable Devices to disconnect the parallel port from the virtual machine and reconnect it Parallel Ports and Linux 2 6 x Kernels Be sure that PC Style Hardware CONFIG_PARPORT_PC is loaded as a module as mentioned at the beginning of Using Parallel Ports on page 392 If you are using a 2 6 x kernel the modules that provide parallel port functionality are modprobe lt modulename gt and modprobe parport_pc To see if these modules are installed and running on your system run the 1smod command as the root user You can also look at the proc modules file for the same list With 2
250. fault delay is 10 seconds To change the delay use the up and down arrows or type a number into the field See Understanding the Start Up Sequence Delay on page 316 for a discussion of this option 320 www vmware com CHAPTER 11 Configuring Teams 5 Click OK Your changes are saved Note The start up sequence applies to team suspend and resume operations as well as power on and power off operations Team virtual machines power off and suspend in the reverse order of the start up sequence with the delays you set in Startup details Team virtual machines power on and resume in the order of the sequence with the delays you set in Startup details LAN Segments To configure LAN segments 1 Choose Team gt Settings 2 Click LAN Segments Team Settings Connections Vitual Machines LAN Segments Options LAN Segment Summary cient 56 Kbps 0 3 loss server United Kbps 0 lose Modem 56 Kbps 5 Z Kops os glx From this tab you can add remove and rename the LAN segments configured for the team You can also configure network transmission properties for the LAN segment from this tab The list in the left pane displays LAN segments associated with the team Click a name to select the LAN segment you want to configure The right pane displays parameters for the physical properties of the emulated LAN segment link e Name The name of the LAN segment To change the name type a new nam
251. figuring Teams Teams Overview Creating and Deleting Teams Making a New Team Opening a Team Closing a Team 268 269 269 269 271 272 273 274 276 277 278 280 285 286 286 287 288 289 290 290 291 291 292 292 295 295 295 295 296 296 299 300 301 301 305 305 www vmware com Deleting a Team Adding and Removing Virtual Machines Adding an Existing Virtual Machine to a Team Removing a Virtual Machine from a Team Cloning and Taking Snapshots of Team Members Cloning a Virtual Machine in a Team Taking Snapshots of Individual Virtual Machines in a Team Starting and Stopping Teams Powering On a Team Powering Off a Team Suspending a Team Resuming a Team Power Operations for Individual Members of a Team Working with Team Networks LAN Segment Requirements Creating a Team LAN Segment Connecting to or Changing a LAN Segment Renaming a LAN Segment Deleting a LAN Segment The Startup Sequence Understanding the Start Up Sequence Delay Working with the Team Console View Displaying Teams The Active Virtual Machine Using Full Screen with Teams Editing Team Settings Connections Virtual Machines LAN Segments Options Command Line for Teams Configuring a Virtual Network Network Basics Components of the Virtual Network Virtual swit
252. figuring on a Linux host 348 configuring on a Windows host 348 DHCPD 355 lease 342 on a virtual network with NAT 366 server 328 342 server on virtual network 331 332 stopping 362 troubleshooting on a Linux host 355 Dial up connection 351 Direct memory access See DMA Disable interface features 455 Disk 134 files on host 213 independent 216 279 performance 454 physical defined 474 size 210 212 224 260 space required on host computer 31 Disks adding virtual disks 219 available in virtual machine 34 defragmenting 215 DMA and performance 450 dynamic 256 existing partition 472 physical 212 223 physical access to 263 physical controlling access to 241 physical do not use Windows dynamic disks 256 physical installing guest operating system on 263 physical SCSI issues 257 physical using in new virtual machine 116 See also Virtual disk shrinking 160 215 234 virtual 210 475 virtual disk files 109 virtual disk manager 230 Display color depth 380 fitting window to virtual machine 170 full screen 168 multiple monitor 169 resolution on a Linux host 382 switching virtual machines 169 DMA and disk performance 450 452 DMZ 300 DNS 367 Drag and drop 181 472 enabling and disabling 181 Driver SCSI 422 sound 389 Drives See Disks tape 422 427 Dual boot and SCSI disks 257 configuring for use in virtual machine 237 241 479 Dual monitor display 169 DVD adding drive to virtual mac
253. files MP3 audio and Real Media audio MIDI output from Windows guests is supported through the Windows software synthesizer MIDI input is not supported and no MIDI support is available for Linux guests Windows 2000 Windows XP and most recent Linux distributions automatically detect the sound device and install appropriate drivers for it Installing Sound Drivers in Windows 9x and Windows NT Guest Operating Systems Windows 95 Windows 98 Windows 98SE and Windows NT 4 0 do not have drivers for the Sound Blaster AudioPCl adapter To use sound in these guest operating systems you must download the driver from the Creative Labs Web site www creative com and install it in the guest operating system Creative Labs has a number of Web sites serving various regions of the world The adapter name varies depending on the region but usually includes PCI 128 389 VMware Workstation 5 User s Manual 390 www vmware com CHAPTER Connecting Devices The following sections describe how to use various devices with a virtual machine e Using Parallel Ports on page 392 e Using Serial Ports on page 397 e Keyboard Mapping on a Linux Host on page 409 e Using USB Devices in a Virtual Machine on page 417 e Connecting to a Generic SCSI Device on page 422 e Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 391 VMware Workstation 5 User s Manual 392 Using Parallel Ports VMware Workstation s
254. fined vmnetO is bridged to etho Do you wish to configure another bridged network yes no no Enter yes 3 If you have additional physical Ethernet adapters not yet connected to a bridged network the prompt is repeated showing information about all currently configured bridged networks 4 When you have set up all the bridged networks you want enter no www vmware com CHAPTER 12 Configuring a Virtual Network Setting Up Two Separate Host Only Networks For some configurations you may need to set up more than one host only network on the same host computer You may for example want to have two virtual machines connected to one host only network and at the same time have other virtual machines connected to another host only network so the network traffic on each network is isolated Or you may want to test routing between two virtual networks Or test a virtual machine with multiple network interface cards without using any physical Ethernet adapters On Windows hosts the first host only network is set up automatically when you install VMware Workstation On Linux hosts the first host only network is set up when you run the vmware config pl program after you install VMware Workstation provided you agree to install host only networking If you did not agree to use host only networking you need to run the program again to set up host only networking To set up the second host only network follow the steps
255. for Workstation on Windows hosts Support for Display Resizing Features for Linux Guests New in v5 5 Workstation 5 5 extends the display resizing features Autofit Guest and Fit Guest Now to Linux guests These features are already supported for Windows guests See Fitting the Workstation Console to the Virtual Machine Display on page 170 and Special Considerations for Display Resizing in Linux Guests on page 171 Enhanced Product Update Checking New in v5 5 Automatic checking for Workstation product updates has been enhanced In Edit gt Preferences the Workspace tab now shows the time and result of the most recent automatic check for updates and the time of the next scheduled check On Linux hosts the Workspace tab also now includes a Check now button so you can check for product updates manually at any time from Edit gt Preferences See Workspace on page 88 29 VMware Workstation 5 User s Manual 30 Host System Requirements What do you need to get the most out of VMware Workstation 5 Take the following list of requirements as a starting point Like physical computers the virtual machines running under VMware Workstation generally perform better if they have faster processors and more memory PC Hardware Standard x86 compatible or x86 64 compatible personal computer 400 MHz or faster CPU minimum 500 MHz recommended Compatible processors include e Intel Celeron Pentium Il Pentium Ill Pentium 4 P
256. forwarded to the NAT device www vmware com CHAPTER 12 Configuring a Virtual Network DNS on the NAT Network The NAT device acts as a DNS server for the virtual machines on the NAT network Actually the NAT device is a DNS proxy and merely forwards DNS requests from the virtual machines to a DNS server that is known by the host Responses come back to the NAT device which then forwards them to the virtual machines If they get their configuration information from DHCP the virtual machines on the NAT network automatically use the NAT device as the DNS server However the virtual machines can be statically configured to use another DNS server The virtual machines in the private NAT network are not themselves accessible via DNS If you want the virtual machines running on the NAT network to access each other by DNS names you must set up a private DNS server connected to the NAT network External Access from the NAT Network In general any protocol using TCP or UDP can be used automatically by a virtual machine on the NAT network so long as the virtual machine initiates the network connection This is true for most client applications such as Web browsing Telnet passive mode FTP and downloading streaming video Additional protocol support has been built into the NAT device to allow FTP and ICMP echo ping to work completely transparently through the NAT On the external network to which the host is connected any virtual
257. from Favorites The virtual machine name is removed from the Favorites list Removing the Active Virtual Machine from the Favorites List To remove the currently open virtual machine from the Favorites list Choose File gt Remove from Favorites The virtual machine is removed from the Favorites list www vmware com CHAPTER 4 Learning VMware Workstation Basics Changing the Name of a Favorite List Item You can rename the Favorites list entry for a virtual machine or team To rename a Favorite list entry 1 Right click the Favorite you want to rename 2 Select Rename from the pop up menu 3 Type the new name for the Favorite and press Enter Note This change is for display only and does not rename the virtual machine files on the host Organizing Favorites into Folders You can arrange your virtual machines and teams in folders To create a folder 1 Right click in the Favorites list 2 Select New gt Folder from the pop up menu 3 Type a name for the folder and press enter 4 Drag and drop your virtual machine or team favorites into the new folder as desired Hiding and Displaying the Favorites List To toggle the display of the Favorites list on or off 1 Choose View gt Favorites If the Favorites list was visible it becomes hidden If it was hidden now it is visible 85 VMware Workstation 5 User s Manual Checking for Product Updates VMware Workstation checks automatically to see if updates for the pro
258. g system Check the guest operating system documentation regarding the type of partition on which the operating system can be installed For example operating systems like DOS Windows 95 and Windows 98 must be installed on the first primary partition while others like Linux can be installed on a primary or extended partition on any part of the drive Identify an appropriate physical partition or disk for the guest operating system to use Be sure that the physical partition is not mounted by the Windows host and not in use by others Also be sure the physical partition or disk does not have data you will need in the future if it does back up that data now Start the New Virtual Machine Wizard File gt New gt Virtual Machine and select Custom Add Hardware Wizard x Select a Disk Which disk do you want this drive to use Dick O Create a new vittual disk A virtual disk is composed of one or more files on the host file system which will appear as a single hard disk to the guest operating system Vital disks can easily be copied or moved on the same host or between hosts O Use an existing vitual disk Choose this option to reuse a previously configured disk Use a physical disk for advanced users Choose this option to give the vitual machine direct access to a local hard disk www vmware com CHAPTER 8 Using Disks 3 When you reach the Select a Disk step select Use a physical disk Add Hardware Wiza
259. g Disable snapshots e f one or more snapshots exist for the selected virtual machine the Disable snapshots option is disabled If you want to disable snapshot functionality you must first delete all snapshots for the current virtual machine Refer to Deleting Snapshots on page 286 287 VMware Workstation 5 User s Manual 288 Revert to a Snapshot When Powering Off To set the virtual machine to revert to a snapshot when you power off go to VM gt Settings gt Options gt Snapshots You have the following options when you power off a virtual machine that has a snapshot e Just power off powers off the virtual machine without any change to its snapshots This is the default setting e Revert to snapshot reverts to the virtual machine s parent snapshot that is the parent snapshot of the current You Are Here position With this setting a virtual machine always starts in the same state Reverting to the snapshot discards changes For example an instructor may need to discard student at the end answers for a computer lesson when a virtual machine is powered off of class e Take a new snapshot takes a new snapshot of the virtual machine state after it is powered off This is useful to preserve milestones automatically The snapshot is displayed in the snapshot manager The name of this snapshot is the date and time the virtual machine was powered off The description is n Automatic snapshot create
260. g My Network Places gt VMware Shared Folders gt host gt Shared Folders gt Test files You can also go directly to the folder using the UNC path host Shared Folders Test files You can map a shared folder to a drive letter just as you would with a network share Note If your guest operating system has VMware Tools from Workstation 4 0 shared folders appear as folders on a designated drive letter Viewing Shared Folders in a Linux Guest In a Linux virtual machine shared folders appear under mnt hgfs To change the settings for a shared folder on the list click the folder s name to highlight it then click Properties The Properties dialog box appears Change any settings you wish then click OK Note Even though the hgfs folder permission settings may seem to indicate that you must have root privileges rw root root to write to the folder any user can write to the shared folder whether logged in as root or not www vmware com CHAPTER 6 Running VMware Workstation Using Drag and Drop With the drag and drop features of VMware Workstation 5 you can move files easily between a Windows host and a Windows virtual machine You can drag and drop individual files or entire directories You can drag and drop files or folders from a file manager such as Windows Explorer on the host to a file manager in the virtual machine or vice versa You can also drag files from a file manager to an application that su
261. g message appears The virtual machine s configuration file has changed its location since its last poweron Do you want to create a new unique identifier UUID for the virtual machine or keep the old one You have four options Create Keep Always Create Always Keep The proper selection depends on the cause for the changed UUID e If you moved this virtual machine you can choose to keep the UUID Select Keep then click OK to continue powering on the virtual machine e If you copied this virtual machine to a new location you should create a new UUID since the copy of the virtual machine is using the same UUID as the original virtual machine Select Create then click OK to continue powering on he virtual machine e Ifthe original virtual machine is being used as a master copy for more virtual machines you can choose to create a new UUID the first time you power on each copy After you configure the virtual machine and are ready to make it a master copy move it to a new location and power it on When the message appears after you power on select Always Create then click OK to continue powering on the virtual machine The virtual machine is set up to create a new UUID every time it is moved Power off the virtual machine and begin using it as a master copy by copying the virtual machine files to other locations e Ifyou intend to move the virtual machine numerous times and want to keep the same UUID each time the virtual machi
262. g partitions are not eligible for shrinking Explanation AN Removable drive DA Not writable e ok _Cancet_ _Heb VMware Tools Properties EJ Options Devices Scripts Shared Folders Shrink disk is disabled for this virtual machine Shrinking is disabled for linked clones parents of linked clones pre allocated disks snapshots and other factors See the user s manual for more information Cancel p Help For example you cannot shrink a vi irtual disk if You preallocated disk space when you created the disk Preallocating disk space is the default option for both typical and custom virtual machine creation paths The virtual machine has any snapshots To delete a snapshot choose VM gt Snapshot gt Snapshot Manager gt Delete The virtual machine contains physical disks The virtual disk is not an independent disk in persistent mode The virtual disk is stored on a CD ROM www vmware com CHAPTER 8 Using Disks Adding Drives to a Virtual Machine VMware Workstation virtual machines can use up to four IDE devices and up to seven SCSI devices Any of these devices can be a virtual hard disk or DVD or CD ROM drive A virtual machine can read data from a DVD disc VMware Workstation does not support playing DVD movies in a virtual machine Many other SCSI devices can be connected to a virtual machine using the host operating system s generic SCSI driver For details
263. ge 285 A snapshot is always a static record of a virtual machine state The You Are Here state can be operational and changing www vmware com CHAPTER 9 Preserving the State of a Virtual Machine Restoring a Snapshot Revert or Go To You can restore a snapshot in VMware Workstation by using the Revert and Go to commands The following sections explain how these commands work The Parent Snapshot The parent snapshot of a virtual machine is the snapshot on which the current state the You Are Here position is based After you take a snapshot that stored state the parent snapshot of the current state is the parent snapshot of the virtual machine If you revert or go to an earlier snapshot the earlier snapshot becomes the parent snapshot of the virtual machine Revert to Snapshot Revert is essentially a shortcut for Go to the parent snapshot of the virtual machine that is the parent snapshot of the You Are Here position Revert immediately activates the parent snapshot of the current state of the virtual machine The current disk and memory states are discarded and the virtual machine reverts to the disk and memory states of the parent snapshot To Revert to the parent snapshot choose VM gt Snapshot gt Revert to Snapshot or click the revert button on the toolbar Go to Snapshot This command activates the snapshot currently selected in the snapshot manager Unlike Revert the Go To command is not limited to
264. gh single IP address or MAC address by your network also use NAT to configure separate virtual machines for handling http and ftp requests with both virtual machines running off the same IP address or domain See Network Address Translation NAT on page 330 e Host only networking configures your virtual machine to allow network access only to the host This can be useful when you want a secure virtual machine that is connected to the host network but available only through the host machine See Host Only Networking on page 332 e Custom networking lets connection manually you configure your virtual machine s network If you select the Typical setup path in the New Virtual Machine Wizard when you create a virtual machine the wizard sets up bridged networking for the virtual machine You can choose any of the common configurations bridged networking network address translation NAT and host only networking by selecting the Custom setup path The wizard then connects the virtual machine to the appropriate virtual network You can set up more specialized configurations by choosing the appropriate settings in the virtual machine settings editor in the virtual network editor on Windows hosts and on your host computer On a Windows host the software needed for all networking configurations is installed when you install VMware Workstation On a Linux host when you install Workstation you can choose whether to have
265. gned bus number 2 In the example above you use 2 for X f you cannot determine the SCSI bus number on your own you can try using a third party tool like winobj which you can download for free from www sysinternals com to determine this information The device target ID is usually set by some jumpers or switches on the device Refer to the owner s manual for the device for information on how to determine the target ID Generic SCSI on a Linux Host Operating System Using the SCSI Generic driver in Linux VMware Workstation allows your guest operating system to operate generic SCSI devices within a virtual machine The SCSI Generic driver sets up a mapping for each SCSI device in dev Each entry starts with sg for the SCSI Generic driver followed by a letter For example dev sga is the first generic SCSI device Each entry corresponds to a SCSI device in the order specified in proc scsi scsi from the lowest device ID on the lowest adapter to the highest device ID on the lowest adapter and so on to the highest device ID on the highest adapter Do not enter dev st0 or dev scdo www vmware com CHAPTER 14 Connecting Devices Note When setting up a generic SCSI device in the virtual machine settings editor as described later in this section you specify the device you wish to install in the virtual machine by typing its dev sg entry in the Connection field You must be logged on as a user who has permissions to use the dev
266. gnificant performance boost if you run in full screen mode www vmware com CHAPTER 15 Performance Tuning Monitoring Virtual Machine Performance VMware Workstation incorporates a set of performance counters that work with Microsoft s Performance console so you can collect performance data from running virtual machines Note The Performance console is available only on Windows hosts You cannot monitor performance for virtual machines on Linux hosts However you can monitor the performance of any virtual machines running on the Windows host including those running Linux guest operating systems The VMware Workstation performance counters can monitor the following data from a running virtual machine e Reading and writing to virtual disks e Memory used by the virtual machine e Virtual network traffic You can track virtual machine performance only when a virtual machine is running The performance counters reflect the state of the virtual machine not the guest operating system For example the counters can record how often a virtual machine reads from a virtual disk but they cannot track how many processes are running inside the guest operating system An explanation of each counter appears in the Performance console To add counters to track virtual machine performance use the Windows Performance console Take the following steps 1 Open the Administrative Tools control panel and double click Performance The Performance c
267. guest operating system to use Check that the physical partition is not mounted by the Linux host and not in use by others Also be sure the physical partition or disk does not have data you will need in the future if it does back up that data now Check the operating system partition mounts Be sure the existing disk partitions that you plan to use in the virtual machine are not mounted by Linux Set the device group membership or device ownership The master physical disk device or devices need to be readable and writable by the user who runs VMware Workstation On most distributions the physical devices such as dev hda IDE physical disk and dev sdb SCSI physical disk belong to group id disk If this is the case you can add VMware Workstation users to the disk group Another option is to change the owner of the device Please think carefully about security issues when you explore different options here www vmware com CHAPTER 8 Using Disks It is a good idea to grant VMware Workstation users access to all dev hd abcd physical devices that contain operating systems or boot managers then rely on VMware Workstation s physical disk configuration files to guard access This provides boot managers access to configuration and other files they may need to boot the operating systems For example LILO needs to read boot ona Linux partition to boot a non Linux operating system that may be on another drive Start the New V
268. h you must be aware of some special considerations The issues arise because the virtual hardware that the operating system sees when it is running in a virtual machine is different from the physical hardware it sees when it is running directly on the host computer It is as if you were removing the boot drive from one physical computer and running the operating system installed there in a second computer with a different motherboard video card and other peripherals then moving it back and forth between the two systems The general approach for resolving these issues is to set up profiles for each of the two operating environments the virtual machine and the physical computer You can then choose the appropriate profile when you start the operating system On some hardware however booting a previously installed operating system within a virtual machine may not work Technical notes in this section document the issues most commonly encountered with various guest operating systems Read the notes that apply to your guest operating system before you begin to set up your virtual machine www vmware com CHAPTER 8 Using Disks Before You Begin Before you begin be sure to read all the sections listed under the name of the operating system you intend to run as a guest in a virtual machine Windows Server 2003 Caution Running a Windows Server 2003 guest from a physical disk is not supported You should not test a Windows Serv
269. h and filename for the floppy image file you want to use or click Browse to navigate to the file If you want to create a new image file click Create Use the default filename and folder or change them as you wish 3 Click Finish 229 VMware Workstation 5 User s Manual Using VMware Virtual Disk Manager VMware Virtual Disk Manager is a utility in VMware Workstation that allows you to create manage and modify virtual disk files from the command line or within scripts One key feature is the ability to enlarge a virtual disk so its maximum capacity is larger than it was when you created it This way if you find you need more disk space in a given virtual machine but you do not want to add another virtual disk or use ghosting software to transfer the data on a virtual disk to a larger virtual disk you can instead change the maximum size of the virtual disk This is something you cannot do with physical hard drives Another feature al you specify how d e All space for ows you to change disk types When you create a virtual machine isk space is allocated You select one of the following the virtual disk is allocated in advance This corresponds to what the virtual disk manager calls the preallocated disk type e Space alloca corresponds ed for the virtual disk begins small and grows as needed This to what the virtual disk manager calls the growable disk type With virtual disk manager you can change w
270. he kernel is compiled Installing Workstation on a Linux Host Note The steps below describe an installation from a CD ROM disc If you downloaded the software the steps are the same except that you start from the directory where you saved the installer file you downloaded not from the Linux directory on the CD 1 Log on to your Linux host with the user name you plan to use when running VMware Workstation In a terminal window become root so you can perform the initial installation steps su Mount the VMware Workstation CD ROM Change tothe Linux directory on the CD 55 VMware Workstation 5 User s Manual 56 5 Continue installation with the appropriate section for your desired installer Using the tar Installer Using the RPM Installer Using the tar Installer g Note You may skip the steps for copying and unpacking the archive and install directly from the vmware distrib directory on the CD Copy the tar archive to a temporary directory on your hard drive for example tmp cp VMware lt xxxx gt tar gz tmp Change to the directory to which you copied the file cd tmp Unpack the archive tar zxpf VMware lt xxxx gt tar gz Change to the installation directory cd vmware distrib Run the installation program vmware install pl Accept the default directories for the binary files library files manual files documentation files and init script Answer Yes when
271. hether the virtual disk type is preallocated or growable and whether the virtual disk is stored in a single file or split then find that you disks were added You can use the vi into 2GB files For example you may have allocated all the disk space for a virtual disk need to reclaim some hard disk space on the host You can convert the preallocated virtual disk into a growable disk then remove the original virtual disk file The new virtual disk is large enough to contain all the data in the original virtual disk The virtual disk grows in size as you add data to it These features and the ability to use scripting to automate management of virtual o VMware Workstation in version 5 0 tual disk manager for the following tasks e Automate the management of virtual disks with scripts e Create virtua disks that are not associated with a particular virtual machine for example to be used as templates e Switch the vi tual disk type from preallocated to growable or vice versa When you change the disk type to growable you reclaim some disk space You can shrink the vir ual disk to reclaim even more disk space 230 www vmware com CHAPTER 8 Using Disks e Expand the size of a virtual disk so it is larger than the size specified when you created it e Defragment virtual disks e Prepare and shrink virtual disks without powering on the virtual machine Windows hosts only You can use the vir
272. hine 226 Dynamic domain name service 356 E EM64T 24 30 EM64T processor supported for 64 bit guest 37 Enable template mode for clone 297 Ethernet virtual adapter 328 Ethernet adapter adding to virtual machine 336 migrating with Virtual Machine Importer 135 promiscuous mode on a Linux host 364 Virtual Machine importer 134 Existing disk using in a virtual machine 212 Experimental support 43 F Favorites defined 472 hide 172 overview 83 removing from list 84 Files BIOS in virtual machine 108 location of virtual disk files 116 redo log 109 197 199 202 Samba and file sharing on a Linux host 378 sharing among virtual machines and host 181 snapshot 110 suspended state 110 used by a virtual machine 108 used by snapshot 109 virtual disk files 109 virtual machine 159 Firewall 373 Fit guest 170 window to virtual machine 170 window 170 Floppy drives in virtual machine 35 image file 35 229 Floppy drive adding to virtual machine 228 Floppy image file connecting to 229 creating 229 Folder shared see Shared folder FreeBSD supported 32 bit guest operating systems 40 supported 64 bit guest operating systems 40 VMware Tools for 146 FTP 367 Full clone 291 Full screen mode defined 472 switching between virtual machines 168 using 168 Full screen switch mode 462 log file 469 G Gated host network 354 Global configuration file 463 Go To snapshot 285 Grab keyboard and mouse input 89 Graphics
273. hine at the instant of the cloning operation Thus the full clone does not have access to any snapshots that may exist of the parent virtual machine 291 VMware Workstation 5 User s Manual 292 Creating Clones This section discusses how to create a clone Note Legacy virtual machines created under previous versions of Workstation or under other VMware products must be upgraded to Workstation 5 virtual machines before you can clone them See Procedure to Upgrade Virtual Machines on page 69 The Clone Virtual Machine Wizard The Clone Virtual Machine Wizard guides through the process of making a clone You do not need to locate and manually copy the parent virtual machine files The Clone Virtual Machine Wizard automatically creates a new MAC address and other unique identifiers for the clone Note You cannot create a clone from a virtual machine that is powered on or suspended You must power off a virtual machine before you can make a clone To create a clone using the Clone Virtual Machine Wizard 1 Select the virtual machine you want to clone Click the name of a virtual machine in the Favorites list or click the tab of a virtual machine in the summary window 2 Open the Clone Virtual Machine Wizard VM gt Clone and click Next Clone Virtual Machine Wizard Welcome to the Clone Virtual Machine Wizard This wizard wil help you create a copy of this vittual machine www vmware com CHAPTER 10 Cloning
274. host operating systems You can also move your disk to different locations on your computer and to other computers with the same host operating system However if you cannot or do not want to commit or discard the changes made to your undoable disk note the following You can always move a disk in undoable mode between host operating systems of the same general type for example between two Microsoft Windows systems or between two Linux systems Depending upon how the disk was first set up you may have to place the disk and its redo log in a directory that has a path name identical to that of the current directory You may be able to move the disk in undoable mode between Windows and Linux host systems or move the disk to a different directory on your current system if there is no path name information in the virtual machine s configuration file This is true for virtual machines created under VMware Workstation 3 1 or higher however virtual machines created with older versions of Workstation contain full path names Follow these steps to check the configuration and see whether or not you can move your undoable disk without committing or discarding changes 1 3 Start VMware Workstation 3 If you are moving a disk in undoable mode from one computer to another computer start VMware Workstation 3 on the computer that currently has your disk Open the configuration file for the virtual machine that uses the undoable mode d
275. ical disks are an advanced feature and should be configured only by expert users This section describes the following topics e Using the Same Operating System in a Virtual Machine and on the Host Computer on page 238 e Before You Begin on page 239 e Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 e Setting Up Hardware Profiles in Virtual Machines on page 247 e Running a Windows 2000 Windows XP or Windows Server 2003 Virtual Machine from an Existing Multiple Boot Installation on page 252 e Setting Up the SVGA Video Driver for a Windows 95 Guest Operating System Booted from a Physical Disk on page 252 e Setting Up the SVGA Video Driver for Use with a Windows 98 Guest Operating System Booted from a Physical Disk on page 254 Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 237 VMware Workstation 5 User s Manual 238 e Configuring Dual or Multiple Boot SCSI Systems to Run with VMware Workstation on a Linux Host on page 257 e Known Issues and Background Information on Using SCSI Physical Disks on page 260 Using the Same Operating System in a Virtual Machine and on the Host Computer You may sometimes want to run an operating system inside a virtual machine and at other times want to run that same installation of the operating system by booting the host computer directly into that operating system If you want to use this approac
276. ical on page 210 e Adding a New Virtual Disk to a Virtual Machine on page 219 e Defragmenting Virtual Disks on page 215 e Shrinking Virtual Disks on page 215 Disk Types Virtual and Physical In the most common configurations VMware Workstation creates virtual hard disks which are made up of files that are typically stored on your host computer s hard disk In some circumstances you may need to give your virtual machine direct access to a physical hard drive on your host computer e Virtual Disk on page 210 e Physical Disk on page 212 Virtual Disk A virtual disk is a file or set of files that appears as a physical disk drive to a guest operating system The files can be on the host machine or on a remote computer When you configure a virtual machine with a virtual disk you can install a new operating system onto the virtual disk without repartitioning a physical disk or rebooting the host Virtual disks can be as large as 950GB IDE or SCSI Depending on the size of the virtual disk and the host operating system VMware Workstation creates one or more files to hold each virtual disk By default the actual files used by the virtual disk start out small and grow to their maximum size as needed The main advantage of this approach is the smaller file size www vmware com Smaller files require less storage space and are easier to move if you want to move the virtual machine to a new location However it takes longer to write
277. ice Requirements Generic SCSI requires version 2 1 36 of the SCSI Generic sg o driver which comes with kernel 2 2 14 and higher Avoiding Concurrent Access to a Generic SCSI Device Under Linux some devices specifically tape drives disk drives and CD ROM drives already have a designated dev entry traditionally st sd and scd respectively When the SCSI Generic driver is installed Linux also identifies these devices with corresponding sg entries in dev in addition to their traditional entries VMware Workstation ensures that multiple programs are not using the same dev sg entry at the same time but cannot always ensure that multiple programs are not using the dev sg and the traditional dev entry at the same time It is important that you do not attempt to use the same device in both host and guest This can cause unexpected behavior and may cause loss or corruption of data Permissions on a Generic SCSI Device You must have read and write permissions on a given generic SCSI device in order to use the device within a virtual machine even if the device is a read only device such as a CD ROM drive These devices typically default to root only permissions Your administrator should create a group with access to read and write to these devices then add the appropriate users to that group Device Support In theory generic SCSI is completely device independent but VMware has discovered it is sensitive to the guest operat
278. ice and information about factors that can affect the performance of VMware Workstation itself This section does not address performance of the guest operating system or the host operating system Note In addition to the VMware Workstation configuration options discussed below you should always install VMware Tools in any guest operating system for which a VMware Tools package exists Installing VMware Tools provides better video and mouse performance and also greatly improves the usability of the virtual machine For details see Installing VMware Tools on page 140 General VMware Workstation Options Guest Operating System Selection Make certain you select the correct guest operating system for each of your virtual machines To check the guest operating system setting choose VM gt Settings gt Options gt General VMware Workstation optimizes certain internal configurations on the basis of this selection For this reason it is important to set the guest operating system correctly The optimizations can greatly aid the operating system they target but they may cause significant performance degradation if there is a mismatch between the selection and the operating system actually running in the virtual machine Selecting the wrong guest operating system should not cause a virtual machine to run incorrectly but it may degrade the virtual machine s performance Memory Settings Make sure to choose a reasonable amount of memory for you
279. ick commands You can right click on a Favorites icon to display a menu of commands you can use for that virtual machine or team You can also click elsewhere in the Favorites list that is not on a virtual machine or team to display a context menu from which you can choose to create a new virtual machine team or folder or open an existing virtual machine team Microsoft Virtual PC or Virtual Server virtual machine or Symantec LiveState Recovery system image Adding an Item to the Favorites List To add a virtual machine or team entry to the Favorites list 1 Open the virtual machine or team that you want to add Choose File gt Open and browse to the location of the virtual machine vmx file or team vmtm file you want as a favorite 2 Choose File gt Add to Favorites The virtual machine or team name appears in the Favorites list Adding the Active Virtual Machine to the Favorites List To add the currently open virtual machine Choose File gt Add to Favorites The virtual machine name appears in the Favorites list Removing an Item from the Favorites List You can remove the name of a virtual machine from the Favorites list at any time Removing the name from the list does not affect the virtual machine s files or operation You can add the virtual machine to the list again at any time To remove a name from the Favorites list take these steps 1 Click a name in the list to select it 2 Choose File gt Remove
280. ided in VMware Player Player gt Help 206 www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Closing VMware Player To close VMware Player Shut down the guest operating system in the virtual machine The player closes automatically after the guest operating system shuts down or In VMware Player choose Player gt Exit Windows or Player gt Quit Linux The player will either suspend or power off the virtual machine depending on the preference you have set for exit behavior in Player gt Preferences Setting Up Virtual Machines for Use with VMware Player You should take special care when you create virtual machines that you intend to be distributed and played by VMware Player You will want to configure the virtual machine for maximum compatibility with all expected host machines and systems Because the player s configuration options are limited users are limited in their ability to make changes in a virtual machine so that it is compatible with their host systems Following are a number of recommendations to help you configure virtual machines for maximum compatibility with VMware Player and with the widest range of host machines Think carefully about what virtual devices are actually required and don t include any that are not needed or useful for the software you are distributing via virtual machine and VMware Player For example generic SCSI devices are extremely unlikely to be appropriate
281. ied nameserverl 208 23 14 2 Mameserver2 63 93 12 3 Nameserver3 208 23 14 4 netbios This section applies only to Windows Timeout for NBNS queries nbnsTimeout 2 Number of retries for each NBNS query nbnsRetries 3 Timeout for NBDS queries nbdsTimeout 3 incomingtcp Use these with care anyone can enter into your virtual machine through these FTP both active and passive FTP is always enabled ftp localhost 8887 8887 192 168 27 128 21 WEB make sure that if you are using named webhosting names point to your host not to guest And if you are forwarding port other than 80 make sure that your server copes with mismatched port number in Host header lynx http localhost 8888 8888 192 168 27 128 80 SSH ssh p 8889 root localhost 8889 192 168 27 128 22 www vmware com CHAPTER 12 Configuring a Virtual Network incomingudp UDP port forwarding example 6000 192 168 27 128 6001 377 VMware Workstation 5 User s Manual 378 Using Samba with Workstation If you have Samba running on your Linux host there are several things you can do to configure Samba so that it works with Workstation as described in this section Modifying Your Samba Configuration Be sure to modify your Samba configuration so it includes the IP subnet used by the VMware Workstation virtual Ethernet adapter VMnet1 To determine what subnet is being used by VMnet1 run sbin ifconfig vmn
282. ifferent computer You can also use VMware Workstation on a Windows host to create virtual disks then move them to a Linux computer and use them under VMware Workstation for Linux or vice versa For information about moving virtual disks see Moving and Sharing Virtual Machines on page 187 CHAPTER 8 Using Disks 211 VMware Workstation 5 User s Manual 212 Physical Disk A physical disk directly accesses an existing local disk or partition You can use physical disks if you want VMware Workstation to run one or more guest operating systems from existing disk partitions While virtual disks are limited to 950GB physical disks may be set up on both IDE and SCSI devices of up to 2TB capacity At this time however booting from an operating system already set up on an existing SCSI disk or partition is not supported Caution If you run an operating system natively on the host computer then switch to running it inside a virtual machine the change is like pulling the hard drive out of one computer and installing it ina second computer with a different motherboard and other hardware You need to prepare carefully for such a switch The specific steps you need to take depend on the operating system you want to use inside the virtual machine For details see Configuring a Dual Boot Computer for Use with a Virtual Machine on page 237 You can also create a new virtual machine using a physical disk For details see Installing an Oper
283. ile and close it 3 Start the virtual machine by double clicking the shortcut The virtual machine starts at the snapshot and the interface is not restricted 461 VMware Workstation 5 User s Manual 462 Using Full Screen Switch Mode Full screen switch mode is a run time option for the VMware Workstation program on Windows Hosts When VMware Workstation is running in full screen switch mode the user has no access to the VMware Workstation user interface The user cannot create reconfigure or launch virtual machines A system administrator performs these functions When VMware Workstation is running in full screen switch mode one or more virtual machines may be running and you can use hot keys to switch from one to another You may also provide hot key access to the host operating system Note Full screen switch mode is enabled for Windows hosts only Linux hosts do not have full screen switch mode Creating a Virtual Machine for Use in Full Screen Switch Mode To create new virtual machines you must run VMware Workstation in standard mode The instructions in this section assume that you are creating the virtual machines on a separate administrative computer However you may if you prefer create the virtual machines directly on the user s computer Create the new virtual machine following the instructions in Creating a New Virtual Machine on page 113 Be sure to make the following choices n step 5 select Cus
284. iles limited to 2GB per file Use this option if you plan to move the virtual disk to a file system that does not support files arger than 2GB You must set this option at the time the virtual disk is created f you are setting up a new virtual machine in the New Virtual Machine Wizard follow the Custom path In the screen that allows you to specify the virtual disk s capacity select Split disk into 2GB files f you are adding a virtual disk to an existing virtual machine follow the steps in the Add Hardware Wizard In the screen that allows you to specify the virtual disk s capacity select Split disk into 2GB files When a disk is split into multiple files larger virtual disks have more vmdk files The first vmdk file for each disk is small and contains pointers to the other files that make up the virtual disk The other vmdk files contain data stored by your virtual machine and use a small amount of space for virtual machine overhead If you chose to allocate space for the virtual disk in advance the file sizes are fixed and most of the files are 2GB As mentioned above the first file is small The last file in the series may also be smaller than 2GB If you did not allocate the space in advance the vmdk files grow as data is added to a maximum of 2GB each except for the first file in the set which remains small The virtual machine settings editor shows the name of the first file in the set the one that
285. ill add a large number of mode lines but you will not get 1 pixel granularity as in Windows VMware Tools adds modelines in 100 pixel increments This means you cannot resize a guest larger than the largest mode defined in your X11 configuration file If you attempt to resize larger a black border will appear and the guest will stop growing e The X server always starts up in the largest resolution that is defined This cannot be avoided The XDM KDM GDM login screen will always appear at the largest size But both Gnome and KDE allow you to specify your preferred resolution so you can reduce the guest display size after you log in 171 VMware Workstation 5 User s Manual 172 Nonstandard Resolutions A guest operating system and its applications may react unexpectedly when the Workstation console size is not a standard VESA resolution e g 640x480 800x600 1024x768 etc For example the Autofit Guest and Fit Guest commands allow your guest operating system screen resolution to be set smaller 640x480 and some installers do not run at resolutions smaller than 640x480 Programs may refuse to run Error messages may include such phrases as VGA Required To Install or You must have VGA to install There are two ways to work around this problem with nonstandard resolutions e If your host computer s screen resolution is high enough you can enlarge the window then choose Fit Guest e If your host computer s sc
286. image file Do one of the following e Ifyou selected Use physical drive choose the drive you want to use from the drop down list or choose Auto detect If you do not want the CD drive connected when the virtual machine starts deselect Connect at power on Click Advanced if you want to specify the device node the drive should use in the virtual machine On the advanced settings screen you may also select Legacy emulation This is necessary only if you have had problems using normal mode The legacy emulation mode does not support all the capabilities of normal mode For example if you are using legacy emulation mode you cannot record CDs you cannot read multisession CDs you cannot extract digital audio from a CD and you cannot read or write DVDs For details see Legacy Emulation for DVD and CD Drives on page 227 After you have made any desired changes in these settings click Finish If you selected Use ISO Image enter the path and filename for the image file or click Browse to navigate to the file If you do not want the CD drive connected when the virtual machine starts deselect Connect at power on www vmware com CHAPTER 8 Using Disks Click Advanced if you want to specify the device node the drive should use in the virtual machine After you have made any desired changes in these settings click Finish 5 The drive is set up initially so it appears to the guest operating system as an IDE ive If you want
287. in may be trademarks of their respective companies Revision 20060111 Version 5 5 Item WS ENG Q305 137 Table of Contents Introduction and System Requirements Product Overview Powerful Virtual Machine Software for the Technical Professional Overview of This Manual About the Host and Guest Computers What s New in Version 5 Multiple Snapshots Enhanced Snapshot Management New in v5 5 Teams Clones VMware Player New in v5 5 mproved Performance for Virtual Machines Running Concurrently mproved Networking Performance mproved Suspend Resume and Snapshot Operations ew Host Operating System Support ew Guest Operating System Support Full Support for 64 Bit Guest Operating Systems New in v5 5 mproved 64 Bit Host Support ew Gigabit Virtual Adapter for 64 Bit Guests New in v5 5 Experimental Support for Two Way Virtual SMP New in v5 5 sochronous USB support Command Line Interface Enhanced Command Line Interface New in v5 5 Autodetect Functionality for More Devices New in v5 5 Devices New in v5 5 ovie Record and Playback mproved Linux User Interface Easier Upgrades and VMware Tools Installation Improvements Support for NX bit Experimental Support for Direct3D Experimental Support for Guest ACPI S1 Sleep VMware Virtual Machine Importer Windows Hosts Only Virtual Machine Importer Incorporated into Workstati
288. indowed mode or quick switch mode Fitting the Workstation Console to the Virtual Machine Display The View menu autofit and fit commands allow you to match the VMware Workstation console with the guest operating system display size View Menu Command Description Autofit Windowt Autofit Guest This command causes the Workstation console to maintain the size of the virtual machine s display resolution If the guest operating system changes its resolution match the new resolution This command causes he Workstation console automatically resizes to he virtual machine to resize the guest display resolution to match the size of the Workstation console Fit Window Now This command causes he Workstation console to match the current display size of the guest operating system Fit Guest Now This command causes he guest operating system display size to match the current Workstation console This command is redundant when one of the au guest operating system display are the same size t An autofit command is toggled on or off each time you select it If both Autofit commands are oggled on then you can manually resize the Wor can also resize the Workstation console station console but the guest operating system ofit options is active because the console and the With both autofit commands toggled off VMware Workstation does not automatically match window sizes
289. ine abruptly with no consideration for work in progress e You can also set the Reset button to send a restart signal to the guest operating system An operating system that recognizes this signal shuts down gracefully and restarts Not all guest operating systems respond to a restart signal from this button If your operating system does not respond to a restart signal restart from within the operating system as you would with a physical machine For instructions on configuring the Reset button see Power Controls in the section Power on page 96 163 VMware Workstation 5 User s Manual 164 Taking and Reverting to a Snapshot VMware Workstation lets you take snapshots of a virtual machine at any time A snapshot preserves the state of all virtual machine disks and the virtual machine s power state powered on powered off or suspended You can take a new snapshot or revert to any previous snapshot at any time When you revert to a snapshot you discard all changes made to the virtual machine since the most recent snapshot Multiple snapshots allow you to preserve different states of the same virtual machine Use the buttons Take Snapshot of the Virtual Machine and Revert Virtual Machine to its Parent Snapshot on the Workstation toolbar to take a snapshot and revert to it later For more information including examples of ways you can use snapshots see Using Snapshots on page 273 www vmware com CHAPTER 6 Running VMware
290. ine on page 417 Sound Adapter See Configuring Sound on page 389 Processors See Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 Generic SCSI Device See Setting Up a New Virtual Machine on page 114 Mouse Linux host only See Human Interface Devices on page 421 94 www ymware com CHAPTER 4 Learning VMware Workstation Basics Options The Options tab lets you adjust characteristics of the selected virtual machine General Virtual Machine Settings Hardware Options Settings Sumay Virtual machine name E General vm0209b Windows XP Pro SP2 D Power Shared Folders Enabled Virtual machine configuration file Snapshots C Documents and Settings user My Documents My Guestisolation Drag and drop enabled SS ent BB Advanced Notmal Normal Template Guest operating system Microsoft Windows O Lin O Novell Netware O Sun Solaris O Other Version Working directory Suspend files and snapshots wil be stored here C Documents and Settings user My Virtual Machine Name Use this setting to change the virtual machine name Type a new name in the field and click OK This field affects the virtual machine name only as it appears in the console tab and Favorites list Changing the virtual machine name here does not change the names of the virtual machine files Virtual Machine Configuration File Windows only This read only field displays the path to the file
291. ine progress periodically C Enable Template mode to be used for cloning Fie locations Configuration E O00_ve TechPubeTookVM Fram Log C 000_vms TechPubsTooiVM Fram 6 Click OK With template mode enabled a virtual machine cannot be deleted or added to a team and the virtual machine s snapshots cannot be deleted 297 VMware Workstation 5 User s Manual 298 Creating a Linked Clone From a Template When you create a linked clone of a template virtual machine the Clone Virtual Machine Wizard includes several special options To create a linked clone from a template 1 2 Select the virtual machine to use as a parent of your linked clone Verify that the parent has at least one snapshot Open the snapshot manager and create a snapshot if none exists Verify that template mode has been enabled See Protecting the Parent of Linked Clones on page 297 With the virtual machine still selected launch the Clone Virtual Machine Wizard Click Next to display the Clone Source panel Select a snapshot from the drop down menu and click Next Clone Virtual Machine Wizard Clone Source Which state do you want to create a clone trom Clone source From current state This virtual machine is a template It can be cloned only from an existing shot From snapshot Snapshot for Linked Clones Description Created to allow VM to be a parent template Note The wizard does not allow yo
292. iness Server 2003 Service Pack 1 listed versions also supported with no service pack Windows XP Professional and Home Edition Service Pack 1 or 2 listed versions also supported with no service pack Windows 2000 Professional and Server Service Pack 1 2 3 or 4 listed versions also supported with no service pack Windows 2000 Advanced Server Service Pack 3 or 4 Wi ndows NT Workstation and Server 4 0 Service Pack 6a required Windows NT 4 0 Terminal Server Edition Service Pack 6 required Wi Wi ndows Me indows 98 including all Customer Service Packs and Windows 98 SE Wi Wi Wi ndows 95 including Service Pack 1 and all OSR releases indows for Workgroups 3 11 ndows 3 1 Microsoft Windows 64 Bit Experimental support for Windows Vista x64 Edition Windows Server 2003 x64 Edition SP1 Windows XP Professional x64 Edition SP1 Microsoft MS DOS MS DOS 6 x 38 www vmware com Linux 32 Bit Mandrake Linux 8 2 9 0 9 1 9 2 10 10 1 Red H Red H Red H Red H Red H SUSE E xperi S Turbo ovel at Linux 7 0 7 1 7 2 7 3 8 0 9 0 at Enterprise Linux AS ES WS 4 0 32 bit at Enterprise Linux 4 0 update 2 beta at Enterprise Linux AS ES WS 2 1 3 0 3 0 update 6 at Enterprise Linux Advanced Server 2 1 SUSE Linux 7 3 8 0 8 1 8 2 9 0 9 1 9 2 9 3 Linux Enterprise Server 7 7 patch 2 8 9 9 SP1 mental support for SUSE Linux Enterprise Server 9 SP3 beta
293. ing VMware Workstation streamlines software development and testing by letting users create multiple development and testing environments as virtual machines on a single PC Developers can create a library of virtual machines and use them to easily develop and test applications on multiple operating systems or to quickly create and test real world multi tier configurations or virtual networks Developers can also use the multiple snapshot capabilities of Workstation to capture and manage point in time configurations to facilitate debugging and give a developer the ability to easily revert back to stable configurations should an error occur during testing VMware Workstation enables developers to reduce configuration and set up time and instead focus on development and testing Enhance productivity of enterprise IT professionals VMware Workstation allows system administrators system engineers and other enterprise IT professionals to create and test multiple computing environments as virtual machines on a single PC prior to deploying these environments on physical PCs or servers in a production environment This dramatically reduces hardware costs and the time and risk associated with IT tasks such as deploying new applications application updates and operating system patches Additionally IT help desk departments can create a virtual library of corporate desktop and server configurations that they can quickly access and manipulate and
294. ing Screen Color Depth on page 380 e Changing Screen Color Depth on the Host on page 380 e Changing Screen Color Depth in the Virtual Machine on page 381 e Using Full Screen Mode on a Linux Host on page 382 e Experimental Support for Direct3D on page 383 e Configuring Sound on page 389 e Installing Sound Drivers in Windows 9x and Windows NT Guest Operating Systems on page 389 379 VMware Workstation 5 User s Manual Setting Screen Color Depth The number of screen colors available in the guest operating system depends on the screen color setting of the host operating system Virtual machines support 16 color VGA mode e 8 bit pseudocolor e 16 bits per pixel 16 significant bits per pixel e 32 bits per pixel 24 significant bits per pixel he host is in 15 bit color mode the guest operating system s color setting controls ffer 15 bit mode in place of 16 bit mode f 0 f the host is in 24 bit color mode the guest operating system s color setting controls offer 24 bit mode in place of 32 bit mode f o you run a guest operating system set for a greater number of colors than your host perating system is using you can encounter various problems In some cases for example the colors in the guest are not correct In others the guest operating system is not able to use a graphical interface n such a case you can either increase the number of colors available on the host or decrease the number of colors us
295. ing an action that is locked here Create new teams and virtual machines Z Edt team and virtual machine configurations Manage virtual networks Password Confirm password Cancel Help 3 Be sure Enable administrative lockout is selected and select the actions you want to restrict If this is the first time administrative lockout options have been set enter a password in the Password field and again in the Confirm password field 4 Click OK to save the settings 457 VMware Workstation 5 User s Manual 458 Removing a Forgotten Password If you cannot remember the password and want to remove it you must uninstall Workstation Be sure to click Yes when asked if you want to remove the administrative lockout settings After you reinstall Workstation you may enable the administrative lockout features again and set a new password www vmware com CHAPTER 16 Special Purpose Configuration Options Restricting the User Interface The restricted user interface affects only the specific virtual machines for which the setting has been made The following changes are made when you enable the restricted user interface e The toolbar is always hidden e All functions on the Power menu are disabled e All functions on the Snapshot menu and snapshot functions on the toolbar are disabled e There is no access to the virtual machine settings editor from the VMware Workstation window e The user cannot cha
296. ing enabled e Asingle processor host with a dual core CPU A multiprocessor host with two CPUs neither of which are dual core or have hyperthreading enabled If the host does not have at least two logical processors assigning two virtual processors is neither supported nor recommended a warning message will appear You can disregard this message and assign two virtual processors to the virtual machine but once you have finished creating the virtual machine you will not be able to power it on unless you move it to a host machine with at least two logical processors For more about Workstation support for virtual Symmetric Multiprocessing SMP see Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 New Virtual Machine Wizard Processor Configuration Specify the number of virtual processors for this vitual machine Processors Number of processors One OTwo 10 If you selected Typical as your configuration path skip to step 11 119 VMware Workstation 5 User s Manual 120 If you selected Custom as your configuration path you may adjust the memory settings or accept the defaults then click Next to continue New Virtual Machine Wizard Memory for the Virtual Machine How much memory would you ike to use for this vitual machine Memory Specify the amount of memory allocated to this vitual machine The memory size must be a multiple of 4 MB Meng foi E amanea A Guest 0S recommen
297. ing system FreeBSD 32 bit guest 40 FreeBSD 64 bit guest 40 guest 472 host 473 installing guest 137 Linux 32 bit guest 39 Linux 64 bit guest 39 S DOS guest 38 Solaris 32 bit guest 40 Solaris 64 bit guest 40 support for 64 bit guest 37 supported 32 bit Windows host 32 supported 64 bit Windows host 32 supported guest 37 supported Linux host 32 supported Windows 32 bit 38 supported Windows 64 bit 38 Opteron 24 30 Opteron processor supported for 64 bit guest 37 Options tab ools 150 Overview clone 290 eam 300 P Packet filtering 351 leaks 350 351 Packet loss LAN segment 322 Page sharing 454 disk performance 454 Parallel ports and lomega Zip drives 396 and the Linux kernel 55 392 configuring on a Linux host 393 in a virtual machine 392 installing in virtual machines 392 Parent clone template 297 linked clone 296 snapshot 285 Partition existing 472 partitions Unsupported and disabled shrink disk 218 Passwords and administrative lockout 457 removing forgotten password 458 Paste text 175 PCI devices 135 Pentium 30 Performance CD ROM drive polling 436 debugging mode 436 disk options 437 DMA and disks 450 guest operating system selection 435 Linux guest 452 memory settings 435 memory usage 443 process scheduling on a Windows host 438 remote disk access 438 using full screen mode on a Linux host 440 using the Windows Performance console 441 Windows 2000 guest 451 Windows 95 and Windows
298. ing system device class and specific SCSI hardware We encourage you to try any SCSI hardware you want to use and report problems to VMware technical support Note If you are using generic SCSI devices in a Windows 95 Windows 98 or Windows Me guest operating system and are experiencing problems with the devices download the latest Mylex BusLogic BT KT 958 compatible host bus adapter from www lsilogic com This driver overrides what Windows chooses as the best driver but it corrects known problems To use SCSI devices in a Windows XP or Windows Server 2003 virtual machine you need a special SCSI driver available from the download section of the VMware Web site at www vmware com download 427 VMware Workstation 5 User s Manual 428 Adding a Generic SCSI Device to a Virtual Machine You can add generic SCSI devices to your virtual machine in the virtual machine settings editor The virtual machine settings editor lets you map virtual SCSI devices to physical generic SCSI devices on the host When you set up a generic SCSI device the virtual machine must be powered off 1 Launch VMware Workstation and select the virtual machine Make sure the virtual machine is powered off 2 Choose VM gt Settings The virtual machine settings editor opens 3 Click Add to start the Add Hardware Wizard Select Generic SCSI Device then click Next 4 Choose the name of the physical device you want to use Then choose the virtual device
299. ing system into the disk file without the need to repartition a physical disk or reboot the host See also Physical disk Virtual machine A virtualized x86 PC environment in which a guest operating system and associated application software can run Multiple virtual machines can operate on the same host machine concurrently Virtual machine configuration The specification of what virtual devices disks memory size etc are present in a virtual machine and how they are mapped to host files and devices Virtual machine configuration file A file containing a virtual machine configuration It is created by the New Virtual Machine Wizard It is used by VMware Workstation to identify and run a specific virtual machine Virtual machine settings editor A point and click editor used to view and modify the settings of a virtual machine after its initial creation See also New Virtual Machine wizard Virtual Network A network between virtual machines with no dependence on real world hardware connections For example you can create a virtual network between a virtual machine and a host that has no external network connections You 475 VMware Workstation 5 User s Manual 476 can also create a LAN segme team See also LAN segment and Teams nt for communications between virtual machines on a Virtual Network Editor A point and click editor used to view and modify the networking settings for the virtual netwo
300. ing systems for example come preconfigured to use DHCP at boot time so Windows virtual machines can connect to the network the first time they are booted without additional configuration If you want your virtual machines to communicate with each other using names instead of IP addresses however you must set up a naming convention a name server on the private network or both In that case it may be simpler to use static IP addresses n general if you have virtual machines you intend to use frequently or for extended periods of time it is probably most convenient to assign them static IP addresses or configure the VMware DHCP server to always assign the same IP address to each of these virtual machines 347 VMware Workstation 5 User s Manual 348 Configuring the DHCP Server on a Linux Host On a Linux host you configure the host only DHCP server by editing the DHCP configuration file for VMnet1 etc vmware vmnet1 dhcp dhcp conf To configure the DHCP server for the NAT network edit the configuration file for VMnet8 etc vmware vmnet8 dhcep dhcep conf Editing the DHCP server configuration file requires information that is best obtained directly from the DHCP server documentation Consult the manual pages dhcpd 8 and dhcpd conf 8 Configuring the DHCP Server on a Windows Host On a Windows host use the virtual network editor to configure the DHCP server Edit gt Virtual Network Settings gt DHCP Virtua
301. ing the virtual disk vmdk files from the virtual machine s directory to the new host You could move them to a shared network directory for example or burn them to CD ROMs if they are not too large Note If your disks are using undoable mode and you have not committed or discarded your changes you must also move the redo log REDO files to the new host computer 199 VMware Workstation 5 User s Manual Preparing the Workstation 5 Host Machine for a Workstation 3 Virtual Machine 1 Make sure VMware Workstation 5 is installed and working correctly on the new host computer 2 Run the New Virtual Machine Wizard and select the appropriate guest operating system for the virtual machine you are moving e Choose a virtual disk for your hard drive and use a drive size and type IDE or SCSI that matches the size and type of the virtual disk you plan to move e Select all appropriate network floppy and CD ROM settings Do not make any changes in the virtual machine settings editor at this point e Save your settings and close VMware Workstation 3 Inthe directory just created for the new virtual machine delete the brand new vmdk files that were just created 4 Locate the virtual disk files you are moving and copy them into the new virtual machine directory Note If your virtual machine is using disks in undoable mode and you did not commit or discard your changes before the move you must also move the redo log
302. ings or information you provided now is the time to make those changes Click Back until you reach the dialog box containing the information you want to change If you do not need to make any changes click Install The installer begins copying files to your computer www vmware com Tis CHAPTER 2 Installing VMware Workstation Optional Enter your name company name and serial number then click Next Your serial number is on the registration card in your package The user and company information you enter here is then made available in the About box Help gt About VMware Workstation i VMware Workstation Registration Information optional You can enter th User Name Test User Company our Company Serial Number XXXKX XXXXX XXKKX XXXXX Note Ifyou skip this step you must enter your serial number later before you can power on a virtual machine Click Finish The VMware Workstation software is installed if VMware Workstation Installation Wizard Completed The installation wizard has successfully installed VMware Workstation Click Finish to exit the wizard Some installations may require that you reboot your PC Reboot now to allow VMware Workstation to complete the installation correctly Installing VMware Workstation Silently If you are installing VMware Workstation on a number of Windows host computers in a corporate environment for example you may want to use
303. inue using your virtual machine even when Workstation is taking or restoring a snapshot Enabling background snapshots for a host with slow hard disks may affect performance If you experience significant performance problems when taking or restoring snapshots turn off this option Workstation supports only one background snapshot process at a time for a virtual machine If you take or restore a second snapshot before a previous snapshot operation completes for the same virtual machine Workstation displays a progress bar until the previous snapshot operation completes Then the second snapshot operation continues in the background A virtual machine that is powered on does not recognize any change to this check box until you restart that virtual machine www vmware com Lockout Windows Hosts Only Preferences Z Enable administrative lockout action that is lacked here Create new teams and virtual machines Egit team and virtual machine configurations Z Manage virtual networks Password Confirm password s Select the actions to lock then enter a password in both f rs must provide this password when performing an Workspace Input Hot Keys Display Memory Priority Lockout amp x OK __ Cancel Help CHAPTER 4 Learning VMware Workstation Basics The Lockout tab lets you restrict who can create new virtual machines edit virtual machine configurations and Interfa
304. ion File gt Exit Windows or File gt Quit Linux To resume a virtual machine that you have suspended 1 Start VMware Workstation and choose a virtual machine you have suspended The process is the same as that described in Starting a Virtual Machine on page 159 Click Resume on the VMware Workstation toolbar Note that any applications you were running at the time you suspended the virtual machine are running and the content is the same as it was when you suspended the virtual machine For more information see Using Suspend and Resume on page 272 161 VMware Workstation 5 User s Manual 162 Shutting Down a Virtual Machine As with physical computers you need to shut down your guest operating system before you power off your virtual machine or team For example in a Windows guest operating system take these steps 1 Choose Shut Down from the Start menu of the guest operating system inside the virtual machine 2 Choose Shut Down then click OK 3 After the guest operating system shuts down you can turn off the virtual machine Click Power Off Now it is safe to exit VMware Workstation or power off a team If you are using a different guest operating system the procedure is similar Follow the usual steps to shut down the guest operating system inside your virtual machine then turn off the virtual machine with the Power Off button Power Off vs Shut Down You can configure the Power Of
305. ion hen refer to Configuring Sound on page 389 Confirm that your virtual devices specifically the network adapter are working properly Windows 95 and Windows 98 guests If any virtual device is missing you can detect it by running Control Panel gt Add New Hardware Install VMware Tools VMware Tools appears and runs in both hardware configurations but affects only the virtual machine Note The next time you reboot Windows natively using the Physical Machine hardware profile some virtual devices may appear in the device list You can disable or remove these virtual devices from the Physical Machine hardware profile in the same way that you removed physical devices from the virtual machine hardware profile in step 6 above 251 VMware Workstation 5 User s Manual 252 Running a Windows 2000 Windows XP or Windows Server 2003 Virtual Machine from an Existing Multiple Boot Installation If you have installed Windows 2000 Windows XP or Windows Server 2003 on a computer then try to run that same installation of the operating system as a VMware Workstation virtual machine running from a physical disk the virtual machine may fail with an error message reporting an inaccessible boot device The problem occurs because the physical computer and the virtual machine require different IDE drivers The Windows plug and play feature which handles drivers for many hardware devices does not install new IDE drivers If
306. ion only receives it f however they are running because they are to supply routing information then you need to configure them so they do not advertise routes to the host only network Unfortunately the version of routed that comes with many distributions of Linux has no support for specifying that an interface should not be advertised Consult the routed 8 manual page for your system in case you have a more contemporary version of the software For gated configuration is involved You need to explicitly exclude the VMnet1 interface from any protocol activity If you need to run virtual machines on a host only network on a multihomed system where gated is used and have problems doing so please contact VMware technical support by submitting a support request at www vmware com requestsupport 354 www vmware com CHAPTER 12 Configuring a Virtual Network Other Potential Issues with Host Only Networking on a Linux Host The following are common issues you may encounter when you are configuring a host only network DHCPD on the Linux Host Does Not Work after VMware Workstation Installation If you were running the DHCP server program dhepd on your machine before installing VMware Workstation it probably was configured to respond to DHCP requests from clients on any network interface present on the machine When host only networking is configured an additional network interface VMnet1 is marked up and available fo
307. ion below File sharing of the type used by Windows operating systems and Samba is possible among computers on the NAT network including virtual machines and the host computer If you are using WINS servers on your network a virtual machine using NAT networking can access shared files and folders on the host that are known by the WINS server so long as those shared files and folders are in the same workgroup or domain Advanced NAT Configuration Windows Host Configure the NAT device using the virtual network editor Edit gt Virtual Network Settings gt NAT Virtual Network Editor x Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT Options on this page let you determine which virtual network is using the vitual NAT device stop 3 and start the NAT service and configure a variety of settings for the NAT device NAT VMnet host Gateway IP address Netmask Edt NAT service Service status Started Start Service request Stop Restart OK Cancel l Help You can stop and start the virtual NAT device by clicking the appropriate buttons www ymware com CHAPTER 12 Configuring a Virtual Network To edit NAT settings for a virtual network choose it from the drop down menu then click Edit NAT Settings Settings VMnet host VMnet amp Gateway IP address 168 15 Netmask UDP timeout 30S minutes Config pot SldowertP Daltow any OUI
308. irtual Machine Wizard File gt New gt Virtual Machine and select Custom When you reach the Select a Disk step select Use a physical disk If the physical disk you plan to use has multiple partitions on it already be aware that certain operating systems DOS Windows 95 Windows 98 must be installed on the first primary partition Caution Corruption is possible if you allow the virtual machine to modify a partition that is simultaneously mounted under the Linux host operating system Since the virtual machine and guest operating system access an existing partition while the host continues to run Linux it is critical that the virtual machine not be allowed to modify any partition mounted by the host or in use by another virtual machine To safeguard against this problem be sure the partition you use for the virtual machine is not mounted under the Linux host At this point you are ready to begin installing the guest operating system on the physical disk you configured for the virtual machine For more details read the installation notes for various guest operating systems in the VMware Guest Operating System Installation Guide available from the VMware Web site or from the Help menu 267 VMware Workstation 5 User s Manual 268 Legacy Virtual Disks VMware Workstation 5 introduces features that were not available in previously released VMware products See What s New in Version 5 on page 21 for a list of these feat
309. irtual machine has virtual disk files vhd of the same name on different paths the import process fails when it attempts to write target virtual disks with duplicate names into the destination folder The completion panel of the VMware Virtual Machine Importer Wizard displays the message The Virtual Machine Importer encountered a problem while copying the disks of the source virtual machine The log file shows the error message The file already exists 135 VMware Workstation 5 User s Manual Workaround Ensure that each source vd file has a unique name 1 In Virtual PC Console remove the disk you wish to rename set the hard disk value to None 2 Rename the vhd file corresponding to the disk you just removed 3 In Virtual PC Console add the renamed disk file 4 Close Virtual PC Console The importer should successfully convert all the disks www vmware com 136 CHAPTER 5 Creating a New Virtual Machine Installing a Guest Operating System and VMware Tools A new virtual machine is like a physical computer with a blank hard disk Before you can use it you need to partition and format the virtual disk and install an operating system The operating system s installation program may handle the partitioning and formatting steps for you Installing a guest operating system inside your VMware Workstation virtual machine is essentially the same as installing it on a physical computer The basic steps for a typica
310. irtual machine to extract more detailed logging for technical support e Enable Template mode to be used for cloning See Linked Clones and Access to the Parent Virtual Machine on page 296 for help configuring this option File locations The read only fields in this section show the location of the virtual machine s Workstation configuration and log files 101 VMware Workstation 5 User s Manual 102 Command Line Reference The following sections describe command line options that are available when you launch VMware Workstation and keyboard shortcuts you can use while VMware Workstation is running Startup Options on a Linux Host The following list describes various options available when you run VMware Workstation from the command line on a Linux host operating system usr bin vmware x X m v s lt variablename gt lt value gt lt path_to_virtual_machine gt lt virtual_machine_name gt vmx X toolkit options You can type these commands manually in a terminal window or create scripts to run multiple commands Option Description x Automatically powers on the virtual machine when VMware Workstation starts This is equivalent to clicking the Power On button in the VMware Workstation toolbar Automatically powers on the virtual machine then switches the VMware Workstation window to full screen mode Closes the virtual machine s tab when the virtua
311. is Windows Me vmdk If your disk entry resembles the one above just a filename with a vmdk extension you can move the disk and redo log anywhere you wish 202 www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Sharing Virtual Machines with Other Users If other users access your virtual machines you should consider the following points e On Windows hosts the virtual machine files should be relocated to a directory that is accessible to all appropriate users The default location for a Windows host is not typically accessible to other users C Documents and Settings lt user name gt My Documents My Virtual Machines When you configure the virtual machine in the New Virtual Machine Wizard you can specify a location for the virtual machine elsewhere on your system or on a network volume e On Linux hosts permissions for the virtual machine files especially the configuration file vmx and virtual disks vmdk should be set for other users according to how you want them to use the virtual machine For example if you want users to run a virtual machine but not be able to modify its configuration do not make the configuration file writable Other users can also share a virtual machine by making a linked clone of it a copy that uses the same virtual disks as the parent virtual machine it was copied from See Cloning a Virtual Machine on page 289 203 VMware Workstation 5 User s Manual
312. is vitual machine Virtual machine name Cone vnon70a Location e My Vitual Machines Clone of vriD1170a 293 VMware Workstation 5 User s Manual 294 The default name and path are based on the original virtual machine name and location You can type a new entry for name and path or use the Browse button to locate a directory for the clone files After you have verified your entries click Finish The Clone Virtual Machine Wizard then displays a status page Clone Virtual Machine Wizard Cloning Virtual Machine v Preparing clone operation Snapshoting vitual machine Creating inked clone v Done A full clone can take many minutes to create depending on the size of the virtual disk that is being duplicated 6 Click Done to exit the Clone Virtual Machine Wizard www vmware com CHAPTER 10 Cloning a Virtual Machine Working with Clones This section discusses the following topics e Making a Linked Clone of a Linked Clone on page 295 e Making a Full Clone of a Linked Clone on page 295 e Network Identity for a Clone on page 295 e The Linked Clone Snapshot on page 296 e Linked Clones and Access to the Parent Virtual Machine on page 296 Making a Linked Clone of a Linked Clone It is possible to make a linked clone from a linked clone using the Clone Virtual Machine Wizard Keep these cautions in mind e Performance degrades when you do this When possible make a linked clone of the p
313. ision to make your virtual disk an IDE or SCSI disk However some guest operating systems such as Windows XP do not include a driver for the Buslogic or LSI Logic adapter You must download the driver from the LSI Logic Web site Note Drivers for a Mylex BusLogic compatible host bus adapter are not obvious on the LSI Logic Web site Search the support area for the numeric string in the model number For example search for 958 for BT KT 958 drivers See the VMware Guest Operating System Installation Guide for details about the driver and the guest operating system you plan to install in this virtual machine 121 VMware Workstation 5 User s Manual 14 Select the disk you want to use with the virtual machine New Virtual Machine Wizard EJ Select a Disk Which disk do you want this drive to use Create a new yatual disk A vitual disk is composed of one or mote files on the host file system which will appear as a single hard disk to the guest operating system Virtual disks can easily be copied or moved on the same host or between hosts O Use an existing virtual disk Choose this option to reuse a previously configured disk O Use a physical disk for advanced users Choose this option to give the virtual machine direct access to a local hard disk Select Create a new virtual disk Virtual disks are the best choice for most virtual machines They are quick and easy to set up and can be moved to n
314. isk for Shrinking Before you can shrink a virtual disk you must prepare each volume on the disk C or D for example for shrinking To prepare a volume it must be located on a Windows host First you must mount the volume To mount the volume use the VMware DiskMount Utility available as a free download from the VMware Web site For information about downloading and using VMware DiskMount see the VMware DiskMount user s manual available from the VMware Web site at www vmware com pdf VMwareDiskMount pdf The VMware DiskMount Utility is available as a free download at www vmware com download diskmount html VMware DiskMount mounts individual volumes of a virtual disk For the best results when you shrink a virtual disk you should mount all the volumes and shrink them After you mount a virtual disk volume use the virtual disk manager to prepare the disk for shrinking To prepare the volume mounted as the M drive for shrinking use the following command vmware vdiskmanager p M Once the preparations are complete unmount the volume Repeat this process for each volume of the virtual disk After you prepare all the volumes for shrinking you can shrink the virtual disk Shrinking a Virtual Disk To shrink a virtual disk it must be located on a Windows host Before you can shrink the virtual disk make sure you prepare all the volumes of the virtual disk for shrinking Then use a command like the following vmware vdiskmanag
315. isk you wish to move In the VMware Workstation window select File gt Open and choose the configuration file of the virtual machine with the disk you want to move Open the Virtual Machine Control Panel 201 VMware Workstation 5 User s Manual 4 Examine the entry for your virtual disk to see whether it includes a full path to the first virtual disk file For example on a Windows host you might see a disk file listing like this My Documents My Virtual Machines Windows Me Windows Me vmdk Entries for SCSI disks are similar If your disk file information resembles the example above with a full path to the first disk file and you have not committed or discarded changes to the undoable disk the following rules apply e You can move the disk to another computer of the same type Windows to Windows or Linux to Linux e You must place the virtual machine s other files including vmx and REDO on Windows vmx or cfg and REDO on Linux in the same relative location on the new computer In other words if the virtual machine s files reside in My Documents My Virtual Machines Windows Me on the original host computer you must place them in that same location on the new host computer e You cannot move the disk to a computer of a different type Windows to Linux or vice versa e You cannot move the disk to another directory on the current system If your disk file information does not contain a path it looks like th
316. it to appear to the guest operating system as a SCSI drive click the drive s entry in the virtual machine settings editor and make that change in the settings panel on the right Q Legacy Emulation for DVD and CD Drives The virtual machine settings editor VM gt Settings provides a Legacy emulation option for DVD and CD drives attached to the virtual machine On Windows hosts this option is deselected by default On Linux hosts with IDE drives the default setting for this option depends on whether he ide scsi module is loaded in your kernel The ide scsi module must be loaded or you must be using a physical SCSI drive if you want to connect directly to the DVD or CD drive f you encounter problems using your DVD or CD drive try selecting Legacy emulation ote that in legacy emulation mode you can read from data discs in the DVD or CD drive but some other functions are not available When Legacy emulation is deselected the guest operating system communicates directly with the drive This direct communication enables capabilities that are not possible in legacy emulation mode such as using CD and DVD writers to burn discs reading multisession CDs performing digital audio extraction and viewing video However in some cases the DVD or CD drive and drivers may not work correctly when the guest operating system is communicating directly with the drive Selecting Legacy emulation is a way to work around these pro
317. ive FTP is to be allowed Active FTP allows incoming connections to be opened by the remote FTP server Turning this off means that only passive mode FTP works Set to 0 to turn it off The udp Section timeout Number of minutes to keep the UDP mapping for the NAT network The dns Section This section is for Windows hosts only Linux does not use this section policy Policy to use for DNS forwarding Accepted values include order rotate and burst e order send one DNS request at a time in order of the name servers e rotate send one DNS request at a time and rotate through the DNS servers e burst send to three servers and wait for the first one to respond timeout Time in seconds before retrying a DNS request retries umber of retries before the NAT device gives up on a DNS request autodetect Flag to indicate if the NAT device should automatically detect the DNS servers available to the host nameserverl P address of a DNS server to use nameserver2 P address of a DNS server to use nameserver3 P address of a DNS server to use f autodetect is on and some name servers are specified the DNS servers specified in nameserverl nameserver2 and nameserver3 are added before the list of detected DNS servers www vmware com CHAPTER 12 Configuring a Virtual Network The netbios Section This section applies to Windows hosts only Linux does not use this section nbnsTimeout 2 Timeou
318. k Next Add Hardware Wizard Select a Physical Disk Which local hard disk do you want this vitual machine to use Device PhysicalDrive0 Usage Use entire dsk O Use individual partitions CHAPTER 8 Using Disks 223 VMware Workstation 5 User s Manual e Choose the physical hard disk to use from the drop down list VMware Workstation supports physical disks up to 2TB e Select whether you want to use the entire disk or use only individual partitions on the disk If you select Use entire disk continue with step 6 5 Ifyou selected Use entire disk in step 4 this step does not appear f you selected Use individual partitions in step 4 now select which partitions you want to use in the virtual machine Select Partitions Which partitions would you lke to use for this virtual disk Partitions Device PhysicalDrive0 Partition Fie System Capacity C Partition 0 HPFS NTFS 34GB C Patition 1 HPFS NTFS 3 468 E Patition 2 HPFS NTFS 21 868 Only the partitions you select in this step are visible to the virtual machine All other partitions are hidden from it Click Next Add Hardware Wizard amp Specify Disk File Where would you like to store information about this disk Disk fle This disk file will store partition access configuration for the selected physical disk as specified for this virtual mac 224 www vmware com CHAPTER 8 Using Disks 6 Accept the default filename and loca
319. k Remove Select the Remove from Specific Configuration radio button then select Physical Machine from the configuration list Click OK then reboot Windows 98 when prompted Boot into Windows 98 natively and verify the display settings You should be able to use the display driver that you installed natively before starting this procedure 255 VMware Workstation 5 User s Manual 256 Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks Windows 2000 Windows XP and Windows Server 2003 support a disk type called a dynamic disk Dynamic disks use a proprietary Microsoft format for recording partition information This format is not publicly documented and thus is not supported for use in physical disk configurations under VMware Workstation Windows 2000 Windows XP and Windows Server 2003 also support the older type of partition table Disks that use this type of partition table are called basic disks You can use the disk management tool to check the type of disk used on your Windows 2000 Windows XP or Windows Server 2003 host and if it is a dynamic disk change it to basic Caution If you change a dynamic disk to a basic disk you lose all data on the disk Use this procedure to convert a dynamic disk to a basic disk 1 Open the disk management tool Start gt Settings gt Control Panel gt Administrative Tools gt Computer Management gt Disk Management 2 Delete all logic
320. kstation Note If you run the RPM installer you need to run this program separately from the command line If you install from the tar archive the installer offers to launch the configuration program for you Answer Yes when you see the prompt Required Configuration Changes Configuration with vmware config pl is required in the following circumstances e When you install VMware Workstation the first time e When you upgrade your version of Workstation e When you upgrade your host operating system kernel It is not necessary to reinstall VMware Workstation after you upgrade your kernel e To reconfigure the networking options for VMware Workstation for example to add or remove host only networking Location of vmware config pl The installer places vmware config pl in usr bin If usr bin is not in your default path run the program with the following command usr bin vmware config pl 57 VMware Workstation 5 User s Manual 58 Web Browser Required To use the VMware Workstation Help system you must have a Web browser installed on your host computer Uninstalling VMware Workstation 5 on a Linux Host Uninstalling an RPM Installation of Workstation If you used the RPM installer to install VMware Workstation remove the software from your system by running rpm e VMwareWorkstation lt XxXxXxX gt Where lt xxxx gt is a series of numbers representing the version and build If you have VMware Workstation prop
321. kstation 5 User s Manual 6 Enter attributes for the shared folder Add Shared Folder Wizard x Specify Shared Folder Attributes What is the scope and lifetime of this shared folder Additional attributes O Bead only C Disable after this session Disable the share the next time the virtual machine is powered off or suspended e Enable this share Select this option to enable the shared folder Deselect this option to disable the shared folder without deleting it from the virtual machine configuration You may want to add a folder to the list without enabling it immediately You can then enable the folder at any time by clicking its name in this list clicking Properties and enabling the folder in the Properties dialog box e Read only Select this option to prevent the virtual machine from changing the contents of the shared folder in the host file system Access to files in the shared folder is also governed by permission settings on the host computer e Disable after this session Select this option to disable the virtual machine s connection to the folder when the virtual machine is powered off or suspended Leave this box unchecked to specify that the folder is always enabled 7 Click Finish www vmware com 178 CHAPTER 6 Running VMware Workstation Adding a Shared Folder on a Linux Host To add a shared folder on a Windows host see Adding a Shared Folder on a Windows Host on page 177 1
322. l machine powers off If no other virtual machine is open it also exits VMware Workstation This is particularly useful when the guest operating system is capable of powering off the virtual machine Sets the specified variable to the specified value Any variable names and values that are valid in he configuration file may be specified on the command line with the s switch Starts the program in quick switch mode ona Linux host Displays the product name version and build number lt path_to_virtual_machine gt lt virtual_machine_name gt vmx Launches a virtual machine using the specified configuration file www vmware com CHAPTER 4 Learning VMware Workstation Basics X toolkit options can be passed as arguments although some of them most notably the size and title of the VMware Workstation window cannot be overridden X toolkit options are not relevant on a Windows host Startup Options on a Windows Host Most of the switches described in Startup Options on a Linux Host can also be used on a Windows host The m switch is for Linux hosts only The most convenient way to use the switches is to incorporate them into the command generated by a Windows shortcut Create the shortcut right click the shortcut then click Properties In the Target field add any switches you want to use after the vmware exe filename For example the following command launches the Windows Me virtual
323. l 402 Connecting Two Virtual Machines You can set up the virtual serial ports in two virtual machines to connect to each other This is useful for example if you want to use an application in one virtual machine to capture debugging information sent from the other virtual machine s serial port To install a direct serial connection between two virtual machines a server and a client take the following steps Windows Host In the server virtual machine 1 Open the virtual machine settings editor VM gt Settings 2 Click Add to start the Add Hardware Wizard 3 Select Serial Port then click Next Serial Port Type What media should this vittual serial port access Serial port O Use physical serial port on the host O Output to fle Output to named pipe 4 Select Output to named pipe then click Next Specify Named Pipe Which named pipe should this serial port connect to Named pipe Apipe com 1 This end is the server v The other end is a vitual machine w Device status Connect at power on 5 Use the default pipe name or enter another pipe name of your choice The pipe name must follow the form pipe lt namedpipe gt that is it must begin with pipe 6 Select This end is the server www vmware com 7 8 9 CHAPTER 14 Connecting Devices Select The other end is a virtual machine By default the device status setting is Connect at power on You may deselect
324. l operating system are 1 Start VMware Workstation 2 Insert the installation CD ROM or floppy disk for your guest operating system Note In some host configurations the virtual machine is not able to boot from he installation CD ROM You can work around that problem by creating an ISO image file from the installation CD ROM Use the virtual machine settings editor o connect the virtual machine s CD drive to the ISO image file then power on he virtual machine 3 Power on your virtual machine by clicking the Power On button 4 Follow the instructions provided by the operating system vendor The next section provides notes on installing a Windows XP guest operating system The screen shots illustrate the process on a Windows host The steps are the same on a Linux host For information on installing other guest operating systems see the VMware Guest Operating System Installation Guide available from the VMware Web site or from the Help menu Note Workstation supports 64 bit guest operating systems only in Workstation versions 5 5 and later and only on host machines with supported processors For the list of processors Workstation supports for 64 bit guest operating systems see Support for 64 Bit Guest Operating Systems on page 37 137 VMware Workstation 5 User s Manual 138 Example Installing Windows XP as a Guest Operating System You can install Windows XP Home Edition or Windows XP Professional in a virtual
325. l Network Editor EJ Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT DHCP Virtual Network Description vmnetl vmnet8 DHCP service Statt service _ Stop service _ Restart service Service status Started Service request oK Cancel p Help Select the virtual network for which you want to change settings and click Properties Settings YMnet host Subnet Netmask Start IP address 168 198 128 End IP address 192 168 198 254 Broadcast address Lease duration for DHCP cents Days Hours Minutes Defauitlease time 0 gt co Eg a g Max lease time es 2 g o gl Make the desired changes then click OK www ymware com CHAPTER 12 Configuring a Virtual Network Choosing the Method for Assigning IP Addresses For virtual machines that you do not expect to keep for long use DHCP and let it allocate an IP address For each host only or NAT network the available IP addresses are split up using the conventions shown in the tables below where lt net gt is the network number assigned to your host only or NAT network VMware Workstation always uses a Class C address for host only and NAT networks Address Use on a Host Only Network Range Address use Example lt net gt 1 Host machine 192 168 0 1 lt net gt 2 lt net gt 127 Static addresses 192 168 0 2 192 168 0 127 lt net gt 128 lt net gt 253
326. l serial port on the host Output to fle O Output to named pipe 4 Select Output to file then click Next Add Hardware Wizard Ed Choose Serial Port Output File Which file should this serial port connect to Output file samplet Device status Connect at power on 5 Browse to the file on the host computer that you want to use to store the output of the virtual serial port By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 6 Click Finish then click OK to close the virtual machine settings editor 7 Power on the virtual machine CHAPTER 14 Connecting Devices 399 VMware Workstation 5 User s Manual 400 Connecting an Application on the Host to a Virtual Machine You can set up the virtual serial port in a virtual machine to connect to an application on the host computer This is useful for example if you want to use an application on the host to capture debugging information sent from the virtual machine s serial port To install a direct serial connection between an application on the host and a virtual machine take the following steps Windows Host 1
327. l snapshots for the active virtual machine Linux hosts have a zoom feature to change the magnification of the tree e Click Zoom In to increase magnification for the snapshot tree display e Click Zoom out to decrease magnification for the snapshot tree display If you have many snapshots this feature allows you to view the whole snapshot tree You can act directly on snapshots in the snapshot tree Action Description Click a snapshot Selects that snapshot To act on the selected snapshots click one of the command buttons Take Snapshot Delete and Clone See Command Buttons on page 284 Double click a Reverts to that snapshot and restores the power state of the virtual machine snapshot at the time the snapshot was taken Right click a snapshot Displays a pop up menu with commands available to that snapshot Go to Snapshot This command opens the selected snapshot as if you clicked the Go To Snapshot button e Clone This snapshot This command creates a stand alone virtual machine called a clone Refer to Cloning a Virtual Machine on page 289 for a description of clones Delete This command deletes the selected snapshots Move the cursor over Displays the complete name of that snapshot This is useful when a long a snapshot without name is truncated in the snapshot tree display clicking Details Region This area displays information about the selected snapshot name descri
328. ld this serial port connect to Physical serial port CM M4 Device statue Connect at power on Choose the port on the host computer that you want to use for this serial connection By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 Click Finish then click OK to close the virtual machine settings editor Power on the virtual machine Using a File on the Host Computer You can set up the virtual serial port in a virtual machine to send its output to a file on the host computer This is useful for example if you want to capture the data a program running in the virtual machine sends to the virtual serial port or if you need a quick way to transfer a file from the guest to the host To install a virtual serial port that connects to a file on the host computer take the following steps i Open the virtual machine settings editor VM gt Settings 2 Click Add to start the Add Hardware Wizard 398 www ymware com 3 Select Serial Port then click Next Add Hardware Wizard K Serial Port Type What media should this virtual serial port access Serial port O Use physica
329. le Devices 82 Creating a Screen Shot or a Movie of a Virtual Machine 83 Creating a Screen Shot of a Virtual Machine 83 Creating a Movie of a Virtual Machine 83 Where to Go Next 85 Moving and Sharing Virtual Machines 187 Virtual Machine Identifier UUID 88 The UUID Location and Format 88 The UUID and Moving Virtual Machines 89 Specifying a UUID for a Virtual Machine 90 Setting the UUID for a Virtual Machine that Is Being Moved 90 Moving a VMware Workstation 5 Virtual Machine 91 osts with Different Hardware 91 Virtual Machines Use Relative Paths 93 Preparing a Workstation 5 Virtual Machine for a Move 193 oving a Workstation 5 Virtual Machine to a New Host 94 Moving a VMware Workstation 4 Virtual Machine 95 Preparing Your Workstation 4 Virtual Machine for the Move 196 oving a Workstation 4 Virtual Machine to a New Host Machine 97 Moving an Older Virtual Machine 98 oving VMware Workstation 3 0 Virtual Machines 98 oving VMware Workstation 2 x Virtual Machines 200 Considerations for Moving Workstation Disks in Undoable Mode 201 Sharing Virtual Machines with Other Users 203 Moving Linked Clones 204 Sharing Virtual Machines with VMware Player 205 Running VMware Player 205 Configuring VMware Player 206 Closing VMware Player 207 Setting Up Virtual Machines for Use with VMware Player 207 www vmware com Using Disks Configuring Hard Disk Storage in a Virtual Machine Disk Types Virtual and Physical Disk Files Lock Files
330. lect the Yield CPU on poll check box as the kernel in the target virtual machine uses the virtual serial port in polled mode not interrupt mode To prepare the debugger virtual machine make sure you have downloaded Debugging Tools for Windows Then follow the steps for the client virtual machine in Connecting Two Virtual Machines on page 402 When you are ready to begin complete the following steps l 2 Power on both virtual machines Check to make sure the serial port is connected Choose choose VM gt Removable Devices If the serial port is not connected choose the virtual serial port then Connect In the debugger virtual machine start debugging with WinDbg or KD normally www vmware com CHAPTER 14 Connecting Devices Keyboard Mapping on a Linux Host This section addresses the following issues and provides additional details on keyboard mapping in Linux e My language specific keyboard is not supported by VMware Workstation Some of the keys on my keyboard don t work right in the virtual machine e My keyboard works fine when run a virtual machine locally but not when run the same virtual machine with a remote X server Quick Answers If your keyboard works correctly with a local X server and you just want the same behavior with a remote X server which is also an XFree86 server running on a PC just power off the virtual machine and close the VMware Workstation window then add the line
331. lect the team name in the favorites list 3 Choose File gt Close The closed team is removed from the summary window To remove the team from the Favorites list see Removing an Item from the Favorites List on page 84 CHAPTER 11 Configuring Teams 305 VMware Workstation 5 User s Manual 306 Deleting a Team When you delete a team you can choose to delete e only the team retaining the virtual machines in the team e the team and the virtual machines in the team Caution Deleting a team permanently removes the team files from the host file system and removes associated LAN segments from all virtual machines Deleting the team s virtual machines along with the team removes the virtual machine files permanently To remove a team from the Workstation window without deleting the team see Closing a Team on page 305 To delete a team permanently 1 Make sure the team is powered off 2 Select the team to delete Click the summary or console tab for the desired team or select the team name in the Favorites list 3 Choose Team gt Delete from Disk 4 To delete the team without deleting the virtual machines in it choose Delete To delete the team and the virtual machines in it choose Delete Team and VMs When you delete a team you also delete all team LAN segments The virtual ethernet adapters associated with deleted LAN segments become disconnected Bridged host only NAT and custom configurations remain unchange
332. ling VMware Tools on page 140 7 Start using your virtual machine 54 www vmware com CHAPTER 2 Installing VMware Workstation Before Installing on a Linux Host Before you begin be sure you have A computer and host operating system that meet the system requirements for running VMware Workstation See Host System Requirements on page 30 The VMware Workstation installation software If you bought the packaged distribution of VMware Workstation the installation software is on the CD in your package If you bought the electronic distribution the installation software is in the file you downloaded Your VMware Workstation serial number The serial number is included in the VMware Workstation package or in the email message confirming your electronic distribution order The installation CD or disks for your guest operating system Check the following notes and make any necessary adjustments to the configuration of your host operating system vmware distrib If you have a previous tar installation delete the previous vmware distrib directory before installing from a tar file again The default location of this directory is tmp vmware distrib Clock The real time clock function must be compiled into your Linux kernel Parallel port VMware Workstation for Linux requires that the parallel port PC style hardware option CONFIG_PARPORT_PC be built and loaded as a kernel module that is it must be set to m when t
333. ling can cause VMware Workstation to connect to the host CD ROM drive which can make it spin up while the virtual machine appears to pause If you have a CD ROM drive that takes especially long to spin up there are two ways you can eliminate these pauses You can disable the polling inside your guest operating system The method varies by operating system For recent Microsoft Windows operating systems the easiest way is to use TweakUl from the PowerToys utilities For information on finding TweakUI and installing it in your guest operating system go to www microsoft com and search for TweakUI Specific instructions depend on your operating system e Another approach is to configure your virtual CD ROM drive to start disconnected The drive appears in the virtual machine but it always appears to contain no disc and VMware Workstation does not connect to your host CD ROM drive To make this change choose VM gt Settings Click the DVD CD ROM item in the Device list Then clear the Connect at Power On check box When you want to use a CD ROM in the virtual machine choose VM gt Removable Devices menu and connect the CD ROM drive 436 www vmware com CHAPTER 15 Performance Tuning Disk Options The various disk options SCSI versus IDE and types virtual or physical affect performance in a number of ways Inside a virtual machine SCSI disks and IDE disks that use direct memory access DMA have approximately th
334. lke to use For this virtual machine Virtual Machine Name wwin2kpraz Location C My Virtual Machines win2kpro2 Browse ant www vmware com CHAPTER 5 Creating a New Virtual Machine Steps 6 and 7 refer to the custom configuration If you selected the typical configuration in step3 skip to step 8 6 Select the format of the virtual machine FF YMware Virtual Machine Importer Select a Virtual Machine Format What Format would you like to use to create the new virtual machine New Workstation 5 Create the new virtual machine using the latest format to leverage new features available in Workstation 5 This virtual machine will not be compatible ESX Server 2 x GSX Server 3 x Workstation 4 x or ACE 1 x Legacy Create the new virtual machine using legacy format This virtual machine can be used with Workstation 5 but wil operate in legacy mode It wil be compatible with VMware ESX Server 2 x GSX Server 3 x Workstation 4 x and ACE 1 x Seren Select New if you want to use the virtual machine only with Workstation 5 x Select Legacy if you want to use the virtual machine with Workstation 4 ESX 2 x GSX Server 3 x or VMware ACE 1 x Click Next 7 Select the import options for the new virtual machine FF VMware Virtual Machine Importer Virtual Machine Import Options How would you like to set up this vitual machine The Virtual Machine Importer can set up a new vitual
335. llation software is in the file you downloaded Your VMware Workstation serial number The serial number is included in the VMware Workstation package or in the email message confirming your electronic distribution order The installation CD or disks for your guest operating system 47 VMware Workstation 5 User s Manual Installing Workstation on a Windows Host 1 Log on to your Microsoft Windows host as the Administrator user or as a user who is a member of the Windows Administrators group Note To install Workstation on a Windows XP or Windows Server 2003 host computer you must log on as local administrator that is not be logged on to the domain unless your domain account is also a local administrator Although an administrator must install Workstation on Windows XP or Windows Server 2003 a normal user without administrative privileges can run the program after it is installed Note Keep in mind that you need one license for each user 2 If you are installing from a CD from the Start menu choose Run and enter D setup exe where D is the drive letter for your CD ROM drive If you are installing from a downloaded file from the Start menu choose Run browse to the directory where you saved the downloaded installer file and run the installer The filename is similar to VMwareWorkstation lt XXXX gt exe Where lt Kxxx gt is a series of numbers representing the version and build numbers 3 Click Nex
336. llowing steps 1 Power on the virtual machine 2 Check to make sure the serial port is connected Choose choose VM gt Removable Devices On that menu serial lt n gt should be reported as pipe lt namedpipe gt on Windows hosts or tmp lt socket gt on Linux hosts If the serial port is not connected choose the virtual serial port then Connect On the host open a Command Prompt window and do one of the following e Ifyou are using WinDbg type the following windbg k com port pipe lt namedpipe gt pipe e Ifyou are using KD type the following kd k com port pipe lt namedpipe gt pipe Then press Enter to start debugging Debugging an Application in a Virtual Machine from another Virtual Machine In this situation you have kernel code to debug in a virtual machine called the target virtual machine and are running Debugging Tools for Windows WinDbg or Kernel Debugger KD in another virtual machine called the debugger virtual machine on the same host This is useful if you are running VMware Workstation on a Linux host The debugger virtual machine must be running Debugging Tools for Windows WinDbg or Kernel Debugger KD in a Windows guest operating system To prepare the target virtual machine follow the steps for the server virtual machine for the appropriate host in Connecting Two Virtual Machines on page 402 Make sure when you configure the target virtual machine s virtual serial port that you se
337. ls for FreeBSD Guests 1 Power on the virtual machine 2 Select VM gt Install VMware Tools The remaining steps take place inside the virtual machine not on the host computer 3 Be sure the guest operating system is running in text mode You cannot install VMware Tools while X is running 4 Asroot su mount the VMware Tools virtual CD ROM image change to a working directory for example tmp uncompress the installer then unmount the CD ROM image Note You do not use an actual CD ROM to install VMware Tools nor do you need to download the CD ROM image or burn a physical CD ROM of this image file The VMware Workstation software contains an ISO image that looks like a CD ROM to your guest operating system This image contains all the files needed to install VMware Tools in your guest operating system Note Some FreeBSD distributions automatically mount CD ROMs If your distribution uses automounting do not use the mount and umount commands below You still must untar the VMware Tools installer to tmp mount cdrom cd tmp Untar the VMware Tools tar file tar zxpf cdrom vmware freebsd tools tar gz umount cdrom 5 Run the VMware Tools installer cd vmware tools distrib vmware install pl www vmware com 146 CHAPTER 5 Creating a New Virtual Machine 6 Log out of the root account exit N wn tart X and your graphical environment nan X terminal launch the VMware Tools background application
338. ltiple dual processor virtual machines concurrently You can set the number of processors for the virtual machine in the virtual machine settings editor VM gt Settings in the Hardware tab under Processors The number of virtual processors is also displayed in the summary view of the virtual machine You can also set the number of virtual processors when you create a virtual machine in the New Virtual Machine Wizard This setting is available only if you choose to create a custom configuration it does not appear in the typical configuration If the host is a uniprocessor machine and is not hyperthreaded assigning two processors is neither supported nor recommended a warning message will appear You can disregard this message and assign two processors to the virtual machine but once you have finished creating the virtual machine you will not be able to power it on unless you move it to a host machine with at least two logical processors Virtual machines with SMP are supported only for Workstation versions 5 5 and later A virtual machine created in Workstation version 5 5 with two virtual processors cannot be powered on or resumed in Workstation versions 5 0 and earlier Also if you suspend an SMP guest in Workstation 5 5 you cannot resume the virtual machine in Workstation versions 5 0 and earlier 429 VMware Workstation 5 User s Manual 430 Moving SMP Virtual Machines between Workstation and ESX Server You can use
339. lution to the one requested by the guest running in the virtual machine In a few cases VMware Workstation may not find the best resolution When VMware Workstation switches to full screen mode it can choose only those resolutions that are already configured for the host s X server If a virtual machine runs at a resolution that does not match a mode listed in host s X server configuration then VMware Workstation chooses the closest larger mode and uses black borders for full screen mode or else simply does not offer full screen mode at all It is possible to have bad modes configured for the X server on your host If your host s X configuration was automatically generated or if you never tested all modes with your current monitor and video card it is possible that some enabled modes do not work with your monitor However the mode switching code in VMware Workstation has no way of knowing this and a virtual machine that tries to use a resolution with a bad mode line can cause your display to fail to display correctly If this happens immediately leave full screen mode by pressing Ctrl Alt then fix your X server configuration and restart X However if the only problem is that the image is off center or is not quite the right size on the monitor you can usually correct it using the controls on your monitor Note that most modern monitors are capable of storing separate settings for each resolution so changing the settings for a n
340. ly when you choose the standard networking options in the New Virtual Machine Wizard or virtual machine settings editor Only one virtual machine is shown in each example but multiple virtual machines can be connected to the same virtual Ethernet switch On a Windows host you can connect an unlimited number of virtual network devices to a virtual switch On a Linux host you can connect up to 32 devices Bridged Networking Virtual Ethernet adapter Virtual machine p BEEUOU Virtual Ethernet switch VMnet0 Host Ethernet Virtual bridge adapter Bridged networking connects a virtual machine to a network using the host computer s Ethernet adapter Bridged networking is set up automatically if you select Use bridged networking in the New Virtual Machine Wizard or if you select the Typical setup path This selection is available on a Linux host only if you enable the bridged networking option when you install VMware Workstation If your host computer is on an Ethernet network this is often the easiest way to give your virtual machine access to that network Linux and Windows hosts can use bridged networking to connect to both wired and wireless networks If you use bridged networking your virtual machine needs to have its own identity on the network For example on a TCP IP network the virtual machine needs its own IP address Your network administrator can tell you whether IP addresses are available for your virtual
341. m whdc devtools debugging default mspx The following two examples illustrate how to use a virtual serial port to debug kernel code in a virtual machine e With the debugging application on the VMware Workstation host Windows hosts only e With the debugging application in another virtual machine on the same VMware Workstation host useful on a Linux host and can also be done ona Windows host Using either of these methods lets you debug kernel code on one system without the need for two physical computers a modem or serial cable Debugging an Application in a Virtual Machine from the Windows Host In this example you have kernel code to debug in a virtual machine called the target virtual machine and are running WinDbg or KD on your Windows host To prepare the target virtual machine follow the steps for a Windows host in Connecting an Application on the Host to a Virtual Machine on page 400 Make sure you configure the virtual machine s virtual serial port as follows e Select This end is the server e Under I O Mode select the Yield CPU on poll check box as the kernel in the target virtual machine uses the virtual serial port in polled mode not interrupt mode To prepare the host make sure you have a recent version of Debugging Tools for Windows one that supports debugging over a pipe You need version 5 0 18 0 or higher 407 VMware Workstation 5 User s Manual 408 When you are ready to begin complete the fo
342. machine You then can install a Windows 98 and run a variety of standard operating systems in the virtual machine Wir template yp vent E xp yenz Click ths button to create a new team You then can add several virtual machines and connect them with private team LAN segments Click this button to browse For virtual machines or teams and to select one to display in this panel You then can interact with the quest operating system within this display as you would a standard PC Open Existing VM or Team oa J The Workstation window Windows host www vmware com Launching VMware Workstation on a Linux Host 1 Open a terminal window 2 Type vmware amp and press Enter The VMware Workstation window opens CHAPTER 4 Learning VMware Workstation Basics V VMware Workstation n File Edit View VM Team Tabs Help u gt S B a Power Off Suspend PowerOn Reset Snapshot Revert Snapshot Manager Full Screen Quick Switch Summary Console Favorites x Home x Mandrake Linux x Windows amp Shen Taan State Powered Off Mandrake Linux Guest OS Mandrake Linux Version Current virtual machine Configuration file home user Mandrake Linux Mandrake Linux vmx Commands I Power on this virtual machine J Edit virtual machine settings Clone this virtual machine Type here to enter notes for this virtual machine
343. machine and what networking settings you should use in the guest operating system Generally your guest operating system may acquire an IP address 329 VMware Workstation 5 User s Manual 330 and other network details automatically from a DHCP server or you may need to set the IP address and other details manually in the guest operating system If you use bridged networking the virtual machine is a full participant in the network It has access to other machines on the network and can be contacted by other machines on the network as if it were a physical computer on the network Be aware that if the host computer is set up to boot multiple operating systems and you run one or more of them in virtual machines you need to configure each operating system with a unique network address People who boot multiple operating systems often assign all systems the same address since they assume only one operating system will be running at a time If you use one or more of the operating systems in a virtual machine this assumption is no longer true If you make some other selection in the New Virtual Machine Wizard and later decide you want to use bridged networking you can make that change in the virtual machine settings editor VM gt Settings For details see Changing the Networking Configuration on page 336 Network Address Translation NAT Virtual Ethernet adapter onon EE RE Boe Ft Virtual machine DHCP server Virtu
344. machine in two different ways It can make a copy of your existing image or it can ink directly to your existing disk images Linking is faster but if you later modily those images you might invalidate the converted virtual machine Make a complete copy of the source vitual machine C Link to the existing virtual machine Warning If you select this option do not modify or extend the A source image after importing Doing so may invalidate the imported vitual machine The new virtual machine wil require VMware Workstation 5 0 or later lt Back News Cancel Make a complete copy of the source virtual machine This creates a VMware virtual machine with no dependencies on the original virtual machine or system image Link to the existing virtual machine This creates a VMware virtual machine that shares the virtual disk of the source virtual machine or system image If you chose to create a legacy virtual machine in step 6 this option is disabled Note If you choose to link to the existing virtual machine for a Virtual PC virtual machine opening the original source virtual machine in Virtual PC may invalidate the imported virtual machine Click Next 131 VMware Workstation 5 User s Manual Review the settings To make changes click Back To proceed click Next F vmware Virtual Machine Importer Ready to Start Importing Your virtual machine will be imported as described below To import thi
345. machine specified powers it on automatically and switches to full screen mode C Program Files VMware VMware Workstation Programs vmware exe X C Documents and Settings lt username gt My Documents My Virtual Machines Windows Me Windows Me vmx Be sure to enclose the entire command string in quotation marks Note The configuration file has a vmx extension by default 103 VMware Workstation 5 User s Manual Command Line Application VMware Workstation includes a separate application vmrun for operating teams or virtual machines from the command line To launch the vmrun application from the command prompt enter vmrun COMMAND OPTION Valid vmrun commands and options are described in the following table Command Description Option list Lists all running virtual machines one start Start a virtual machine Path to vmx file stop Stop a virtual machine or team Path to vmx file virtual machine or Path to vmtm file team reset Reset a virtual machine or team Path to vmx file virtual machine or Path to vmtm file team suspend Suspend a virtual machine or team Path to vmx file virtual machine or Path to vmtm file team upgradevm Upgrade a virtual machine to the current Path to vmx file Workstation version installtools Install VMware Tools in the guest operating Path to vmx file system In Windows guests the VMware Tools installer runs autom
346. mal Template Em Power Off 10 Suspend Virtual Machine D Power on Resume Vittual Machine G Reset Run VMware Tools scripts Cater powering on C Atter resuming C Before suspending C Before powering off Cancel Help Power options e Power on after opening this virtual machine Select this option to power on the selected virtual machine automatically when Workstation launches With this option selected you do not have an opportunity to change the virtual machine s configuration before it starts since the virtual machine powers on immediately e Enter full screen mode after powering on Select this option to enter full screen mode automatically after powering on the selected virtual machine e Close after powering off or suspending Select this option to close the selected virtual machine automatically after you power it off or suspend it Closing a virtual machine removes the tab for that machine from the main window in quick switch mode 96 www vmware com CHAPTER 4 Learning VMware Workstation Basics Power Controls Note Settings in Power Controls apply only to the active virtual machine e E You can configure this button to turn off a virtual machine or team in two ways Select Power Off if you want this button to work the way a power switch works on a power supply The virtual machine is abruptly powered off with no consideration for work in progress Select Shut Down Guest if you want this
347. may also include the host operating system in the cycle If any particular virtual machine is not running it is skipped If only one virtual machine is running and the host operating system is not included in the cycle pressing the hot key has no effect 464 www vmware com CHAPTER 16 Special Purpose Configuration Options The hot key for cycling through virtual machines is defined in the global configuration file config ini Two options control cycling FullScreenSwitch cycleKey The value of this option defines the hot key It is specified as lt key gt lt modifiers gt There is no default For example to use the Pause key with no modifier to cycle through virtual machines add the following line to the config ini file or modify its value if the option is already listed FullScreenSwitch cycleKey 0x13 0x0 FullScreenSwitch cycleHost The value of this option determines whether the host operating system is included in the cycle Possible values are true and false The default value is false For example to include the host operating system in the cycle add the following line to the config ini file or modify its value if the option is already listed FullScreenSwitch cycleHost TRUE Hot Keys for Switching Directly to Virtual Machines and the Host Computer You can specify a hot key or hot key combination for switching directly to any available virtual machine on a host computer Each time you press the
348. med snap2 that was taken from the state of a root snapshot named snap1 Because the forward slash can be used in a pathname to specify a particular snapshot in the revertToSnapshot commana it is recommended that you avoid using the slash character when you name a snapshot since this will make it difficult for you to predict which snapshot a pathname will identify snapshot name or Path to vmx file snapshot name1 snapshot name2 Note Before running this command on a Windows host you must do one of the following e Change your working directory to the VMware Workstation directory The default location is c Program Files VMware VMware Workstation e Add the VMware Workstation directory to the system path On Windows 2000 and XP this setting is changed from Control Panels gt System gt Advanced gt Environment Variables gt System variables gt Path 105 VMware Workstation 5 User s Manual 106 Examples for vmrun For example to start a virtual machine e Ina Linux terminal enter vmrun start usr local VMs lt virtual_machine_name gt vmx e On the Windows command line enter vmrun start c My Virtual Machines lt virtual_machine_name gt vmx With virtual machines that require input through a VMware Workstation dialog box vmrun may time out and fail To disable Workstation dialog boxes insert the following line into the vmx configuration file for a virtual machine
349. move a previous version Ona Windows host the uninstaller may ask if it should remove licenses from your registry Do not allow the uninstaller to remove the licenses You can safely keep licenses for multiple VMware products on the computer at the same time e OnaLinux host the license remains in place You do not need to take any special action You may safely leave the license where it is The actual upgrade installation depends on your host operating system e Upgrading on a Windows Host on page 65 e Upgrading on a Linux Host on page 66 www vmware com CHAPTER 3 Upgrading VMware Workstation Upgrading on a Windows Host e You may upgrade from Workstation 4 to version 5 using the VMware Workstation 5 upgrade product e Toupgrade from version 3 to version 5 you must have the full VMware Workstation 5 product Upgrading from Version 4 or an Earlier Version 5 Release 1 Launch the Workstation 5 installer from your download directory or CD ROM 2 Reboot your computer if you are prompted to do so 3 Allow the installer to complete the installation Upgrading from Version 3 to Version 5 1 Uninstall the Workstation version now installed on your computer For details see Removing Version 3 on page 65 Note The uninstaller may offer to remove licenses from your registry Do not remove the licenses 2 Reboot your computer 3 Install version 5 Note When you are upgrading with an upgrade serial number the install
350. mproved 64 Bit Host Support on page 25 e SUSE Linux Pro 9 2 e SUSE Linux 10 e SUSE Linux Enterprise Server 9 0 e Mandrake Linux 10 e Windows Server 2003 SP1 e Red Hat Enterprise Linux 4 0 e Experimental support for Ubuntu Linux 5 10 e Experimental support for Ubuntu Linux 5 04 23 VMware Workstation 5 User s Manual New Guest Operating System Support See also Full Support for 64 Bit Guest Operating Systems New in v5 5 on page 24 Windows Small Business Server 2000 Red Hat Linux Advanced Server 3 0 Red Hat Enterprise Linux 4 0 beta SUSE Linux 9 3 SUSE Linux Pro 9 2 SUSE Linux Enterprise Server 9 0 SUSE Linux Enterprise Server 9 SP1 experimental support Mandrake Linux 10 Novell NetWare 6 5 SP3 Novell NetWare 5 1 SP8 Novell Linux Desktop 9 Sun Java Desktop System Windows Server 2003 SP1 FreeBSD 5 3 Ubuntu Linux 5 10 Ubuntu Linux 5 04 Turbolinux Desktop 10 Various other service pack updates and kernel updates Full Support for 64 Bit Guest Operating Systems New in v5 5 Workstation 5 5 introduces full support for virtual machines with 64 bit guest operating systems running on host machines with the following processors AMD Athlon 64 revision D or later AMD Opteron revision E or later AMD Turion 64 revision E or later AMD Sempron 64 bit capable revision D or later experimental support Intel EM64T VT capable processors experimental support 24 www vmwa
351. mproves the user s experience working with the virtual machine Choose a reasonable screen resolution for the guest A user is likely to find it easier to increase the resolution manually than to deal with a display that exceeds the user s physical screen size Note that the player cannot automatically resize the display for Linux guests as it can for Windows guests Some host operating systems do not support CD ROMs in non legacy mode To ensure that CD ROMs work properly in virtual machines that you intend to be distributed and played on VMware Player you should configure CD ROM devices in legacy mode Shared folders should not be enabled VMware Player does not support shared folders Make sure all of the power options are turned off in the virtual machine settings editor VM gt Settings gt Options gt Power gt Power options These options are e Power on after opening this virtual machine e Enter full screen mode after powering on e Close after powering off or suspending Make an appropriate setting in VM gt Settings gt Options gt Snapshots gt When powering off You should set this option to Just power off Revert to snapshot or Ask me The option Take a new snapshot is inappropriate for virtual machines running in VMware Player because the player does not provide a way to access the resulting snapshot The option Revert to snapshot is useful if you want to distribute a demo that resets itself to a clean state when powe
352. n and you want to move it to a different computer Or even somewhere else on the same computer The process is not difficult and in most cases you can even move your virtual machine from a Windows host to a Linux host or vice versa If the virtual machine was created under VMware Workstation 5 follow the directions in this section These instructions assume that you are using a virtual disk stored in a set of vmdk files on your host computer Caution It s always safest to make backup copies of all the files in your virtual machine s directory before you start a process like this This section discusses the following topics e Hosts with Different Hardware on page 191 e Virtual Machines Use Relative Paths on page 193 e Preparing a Workstation 5 Virtual Machine for a Move on page 193 e Moving a Workstation 5 Virtual Machine to a New Host on page 194 Hosts with Different Hardware If you move a virtual machine to a host with significant hardware differences the guest operating system may no longer work correctly Moving between 64 Bit and 32 Bit Hosts Moving a virtual machine from a 64 bit host to a 32 bit host can require that you recompile the kernel in your Linux guest operating system Note Workstation supports 64 bit guest operating systems only in Workstation versions 5 5 and later and only on host machines with supported processors When you power on a virtual machine with a 64 bit guest operating system Worksta
353. n page 18 What s New in Version 5 on page 21 Host System Requirements on page 30 Virtual Machine Specifications on page 34 Supported Guest Operating Systems on page 37 Technical Support Resources on page 41 17 VMware Workstation 5 User s Manual 18 Product Overview Thank you for choosing VMware Workstation the powerful virtual machine software for enterprise IT professionals Bl VMware Workstation File Edt View VM Team Windows Help VMware Workstation ES 3T lent server DB E inue vms VMware Workstation alows mutisle standard operating systems and ther applcations to besa run ith high performance In secure and transportable virtual machines Each virtual machine is equivalent to a PC wth a unique network address and ful complement of ReELcean stal acne ea E RHEL3 gold E suse91 E Windows vms Cick this button to create a new virtual machine You then can install E Windows 98 and run a variety of standard operating systems inthe virtual machine E Wink template New Virtual KPPN Machine G vevene D Click this button to create a new team You then can add several virtual machines and connect them wth private team LAN segments New Team 4 Cickthis button to browse for virtual machines or teams and to select S one to display in this panel You then can interact with the guest operating system within this display as you would a standard PC Open Existing SoBe 4 Run the operating systems an
354. n page 305 e Deleting a Team on page 306 Making a New Team Use the New Team Wizard to create a team then add virtual machines 1 Open the New Team Wizard Choose File gt New gt Team New Team Wizard Welcome to the New Team Wizard This wizard will guide you through the steps of creating a new team 2 Click Next to confirm the wizard 3 Type a name and path for the team and click Next New Team Wizard Name the Team What name would you like to use for this team Team name New Team Location C Documents and Settings user My Documents My Vital Mac Browse Coto J ieas conce CHAPTER 11 Configuring Teams 301 VMware Workstation 5 User s Manual 302 The default name and path are based on your default Virtual Machine location You can type a new entry for name and path or use the Browse button to find the directory where you want to store the team files After you have verified your entries click Next If you wish you can add virtual machines to your team New Team Wizard amp Add Virtual Machines to the Team A team is a collection of virtual machines that can be powered on and off as a group Would you like to add virtual machines to the team now Oles O No will add virtual machines later You can add vitual machines at ary time using the Team gt Add menu Click Next If you select No will add virtual machines later skip to step 9 If you selec
355. n page 67 e Use a Legacy Virtual Machine with Upgrade on page 68 Only the latter two apply to virtual machines created under previous versions of VMware Workstation Create Everything New from the Start Use the New Virtual Machine Wizard to set up a new virtual machine and install a guest operating system in the virtual machine as described in Creating a New Virtual Machine on page 113 If you set up your virtual machines in this way you are using the latest technology and enjoy the performance benefits of the newest features Use a Legacy Virtual Machine without Upgrading A legacy virtual machine is a virtual machine created in Workstation 4 x GSX Server 3 x and ESX Server 2 x You can use such a virtual machine in Workstation 5 e Upgrade VMware Tools to the new version following the instructions for your guest operating system in Installing VMware Tools on page 140 You should not remove the older version of VMware Tools before installing the new version e AVMware Workstation 4 virtual machine set up in this way should run without problems However you will not have the benefits of certain new features including multiple snapshots streaming USB devices and performance improvements 67 VMware Workstation 5 User s Manual Use a Legacy Virtual Machine with Upgrade If you upgrade an existing virtual machine from Workstation 4 x GSX Server 3 x or ESX Server 2 x you gain access to new features and enjoy the performance benefits
356. n page 87 Virtual Machine Settings on page 94 Command Line Reference on page 102 Keyboard Shortcuts on page 107 What Files Make Up a Virtual Machine on page 108 The illustrations in these sections show a Windows XP guest operating system Some commands used in the illustrations are different from those used in other guest operating systems 71 VMware Workstation 5 User s Manual 72 Launching VMware Workstation The method of starting the VMware Workstation application depends on your host operating system e Launching VMware Workstation on a Windows Host e Launching VMware Workstation on a Linux Host Launching VMware Workstation on a Windows Host Launch VMware Workstation by double clicking the shortcut on your desktop or launch the program from the Start menu Start gt Programs gt VMware gt VMware Workstation SE a VMware workstation The VMware Workstation window opens Cae EER E VMware Workstation Fie Edt View VM Team Windows Help aow 3 2T Client Server VMware Workstation 3T Client Server DB BD Linux vis VMware Workstation allows multiple standard operating systems and their applications to EB Mandrake Linux run with high performance in secure and transportable virtual machines Each virtual Fi RHEL3 clean instal machine is equivalent to a PC with a unique network address and full complement of Bee hardware choices E suse91 E Windows Ms Click this button to create a new virtual
357. n the VMware Workstation configuration program su vmware config pl 2 Watch for the following question Do you want networking for your Virtual Machines yes no help yes Answer Yes if you still want to use any networking in your virtual machines then continue to the next question Otherwise answer No to remove all networking 3 If you answer Yes the program prompts you to select the wizard or editor to edit your network configuration Select editor This is the only way to delete virtual network adapters without removing all of them Would you prefer to modify your existing networking configuration using the wizard or the editor wizard editor help wizard editor 4 You see a list of virtual networks that have been configured Select the network corresponding to the adapter you wish to disable The following virtual networks have been defined vmnetO is bridged to etho vmnet1 is a host only network on subnet 172 16 155 0 vmnet8 is NAT network on a private subnet 172 16 107 0 Which virtual network do you wish to configure 0 99 1 5 You may be prompted to keep this virtual network If you are sure you want to remove it answer Yes to the question The network vmnetl has been reserved for a host only network You may change it but it is highly recommended that you use it as a host only network Are you sure you want to modify it yes no no yes 6 When prompted about the type of virtual net
358. n the screen Press Enter to accept the default value 6 Log off of the root account exit 7 Start X and your graphical environment 8 In an X terminal launch the VMware Tools background application vmware toolbox amp Note You may run VMware Tools as root or as a normal user To shrink virtual disks you must run VMware Tools as root su Starting VMware Tools Automatically You may find it helpful to configure your guest operating system so VMware Tools starts when you start your X server The steps for doing so vary depending on your Linux distribution and your desktop environment Check your operating system documentation for the appropriate steps to take For example in a Red Hat Linux 7 1 guest using GNOME follow these steps 1 Open the Startup Programs panel in the GNOME Control Center Main Menu click the foot icon in the lower left corner of the screen gt Programs gt Settings gt Session gt Startup Programs 2 Click Add 3 In the Startup Command field enter vmware toolbox 4 Click OK click OK again then close the GNOME Control Center The next time you start X VMware Tools starts automatically 145 VMware Workstation 5 User s Manual Uninstalling VMware Tools To remove VMware Tools from your Linux guest operating system log on as root su and enter the following command e From a tar install vmware uninstall tools pl e From an RPM install rpm e VMwareTools VMware Too
359. n to boot a non Linux operating system that may be on another drive If you plan to run a second Linux installation from an existing partition as a guest operating system and your physical machine s etc lilo conf hasa memory register statement such as Append mem you may want to adjust the append memory parameter or create a new entry in LILO for running Linux in a virtual machine www vmware com CHAPTER 8 Using Disks Many newer Linux distributions recognize all physical memory in the physical machine whereas many older Linux distributions see only the first 64MB of memory by default Machines with more than 64MB of memory that run the older distributions may have the Append meme parameter added under the Image section of Lilo conf to tell Linux to look for more memory than seen by default If the amount of memory configured in Lilo conf exceeds the amount of memory assigned to the virtual machine the guest operating system is likely to panic when the virtual machine tries to boot the second Linux installation You can create another entry in Lilo conf for running Linux in a virtual machine by specifying a different amount of memory than what should normally be recognized when Linux boots directly on the physical machine Setting Up the Virtual Machine Configuration 1 2 Start VMware Workstation Start the New Virtual Machine Wizard File gt New gt Virtual Machine and select Custom When you
360. ndows eft 0x15b Windows right 0x15c Menu 0x15d The 84 key keyboard has a Sys Req key on the numeric pad Symbol Shifted symbol Location V scan code Sys Req numeric pad 0x054 Keyboards outside the U S u sually have an extra key o left shift key Symbol Shifted symbol Location V scan code lt gt 0x056 ften lt gt or lt gt next to the www ymware com CHAPTER 14 Connecting Devices Using USB Devices in a Virtual Machine VMware Workstation 5 provides a two port USB 1 1 controller You can use up to two USB devices in your virtual machine if both your host operating system and your guest operating system support USB If your host computer supports USB 2 0 devices you can use those devices in the virtual machine with the appropriate device drivers installed in the guest Note When a USB device and the host controller both support USB 2 0 the device will automatically operate in USB 2 0 mode This should usually work correctly even though the transaction must proceed through the USB 1 1 controller in the guest However in some cases the guest UHCI USB 1 0 drivers may not be able to handle certain USB 2 0 specific transactions or features for example the larger USB 2 0 packet size This may cause the guest to crash To work around this problem plug the device into a USB 1 0 hub This will force the device to use the USB 1 0 packet size Experimental support is provide
361. ne Virtual Machine wizard A point and click interface for convenient easy duplication of a virtual machine within VMware Workstation See also Full clone and Linked clone Configuration See Virtual machine configuration file Custom networking Any type of network connection between virtual machines and the host that does not use the default bridged host only or network address translation NAT networking configurations For instance different virtual machines 471 VMware Workstation 5 User s Manual 472 can be connected to the host by separate networks or connected to each other and not to the host Any network topology is possible Drag and drop With the drag and drop feature of VMware Workstation you can move files easily between a Windows host and a Windows virtual machine You can drag and drop individual files or entire directories Existing partition A partition on a physical disk in the host machine See also Physical disk Full clone Acomplete copy of the original virtual machine plus all associated virtual disks See also Linked clone Full screen mode A display mode in which the virtual machine s display fills the entire screen See also Full screen switch mode Quick switch mode Full screen switch mode A display mode in which the virtual machine s display fills the entire screen and the user has no access to the VMware Workstation user interface The user cannot create rec
362. ne moves select Always Keep and click OK to continue powering on the virtual machine Note If you want to change the Always Keep or Always Create setting power off the virtual machine and edit its configuration file vmx Delete the line that contains uuid action create or uuid action keep Suspending and resuming a virtual machine does not trigger the process that generates a UUID Thus the UUID in use at the time the virtual machine was suspended remains in use when the virtual machine is resumed even if it has been copied or moved However the next time the virtual machine is rebooted the message appears so you can choose to create a new UUID or keep the existing one 189 VMware Workstation 5 User s Manual 190 Specifying a UUID for a Virtual Machine In some circumstances you may want to assign a specific UUID to the virtual machine To do this you need to override the automatically generated UUID value Power off the virtual machine and edit its configuration file vmx to set the value of the UUID parameter Use a text editor to edit the configuration file The format for the line is uuid bios lt uuidvalue gt The UUID value must be surrounded by quotation marks A sample configuration line ooks like uuid bios 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff After adding this line to the configuration file power on the virtual machine The new UUID is used when the virtual machine boots Setting the UU
363. near process each snapshot has one parent and one child except for the last snapshot which has no children In a process tree each snapshot has one parent but one snapshot may have more than one child Many snapshots have no children 275 VMware Workstation 5 User s Manual 276 Examples of Using Snapshots Using Snapshots as Protection from Risky Changes If you plan to make risky changes in a virtual machine for example testing new software or examining a virus take a snapshot before you begin If you encounter a problem you can restore the virtual machine to the state preserved in that snapshot If your risky actions cause no problems you can take another snapshot of the virtual machine in its new state Snapshots can minimize lost work if something goes wrong With multiple snapshots of saved positions you can return at any time to any important position when you discover a problem Starting a Virtual Machine Repeatedly in the Same State You can configure the virtual machine to revert to a snapshot any time it is powered off You might use this feature for example in setting up student virtual machines to power on for each new class at the beginning of the lesson discarding previous student work See Reverting at Power Off on page 285 for the procedure Automatically Recording Milestone Status You can configure a virtual machine to take a snapshot any time it is powered off preserving a virtual audit trail as work p
364. ng select Use NetBIOS setting from DHCP Server 6 Click OK twice then click Close Manually Entering the IP Address of a WINS Server Use this method to connect to a WINS server in the same workgroup or domain that is not already set up on the host 1 In the virtual machine right click on My Network Places and choose Properties 2 In the Network Connections window right click the virtual network adapter and choose Properties 3 Inthe Properties dialog box select Internet Protocol TCP IP then click Properties 4 Inthe TCP IP Properties dialog box click Advanced 5 Click the WINS tab then click Add 6 In the TCP IP WINS Server dialog box enter the IP address for the WINS server in he WINS server field then click OK The IP address of the WINS server appears in he WINS addresses list on the WINS tab Repeat steps 5 and 6 for each WINS server to which you want to connect from his virtual machine 7 Click OK twice then click Close 374 www vmware com CHAPTER 12 Configuring a Virtual Network Now that the virtual machine has an IP address for a WINS server you use NetLogon in the virtual machine to log on to a domain and access shares in that domain For example if the WINS server covers a domain with a domain controller it is possible to access that domain controller from the virtual machine and add the virtual machine to the domain You need to know the user ID and password of the Administrator
365. ng Virtual Machine Teams on page 167 157 VMware Workstation 5 User s Manual 158 Controlling the Display on page 168 Installing New Software on page 174 Cutting Copying and Pasting Text on page 175 Using Shared Folders on page 176 Using Drag and Drop on page 181 Using Devices in a Virtual Machine on page 182 Creating a Screen Shot or a Movie of a Virtual Machine on page 183 The illustrations in these sections show a Windows XP guest operating system Some commands used in the illustrations are different from those used in other guest operating systems www vmware com CHAPTER 6 Running VMware Workstation Starting a Virtual Machine To start a virtual machine 1 Start Workstation For instructions see Launching VMware Workstation on page 72 Select the name of the virtual machine you want to use in the Favorites list at the left of the Workstation window If the virtual machine you want to use is not shown there choose File gt Open and browse to the configuration vmx file for the virtual machine you want to use Refer to Virtual Machine Location on page 159 for help finding virtual machines on your host operating system Click the Power On button to start the virtual machine Click anywhere inside the virtual machine window to give the virtual machine control of your mouse and keyboard If you need to log on type your name and password just as you would on a physical computer Note If
366. ng disks rearranges files programs and unused space on the virtual disk so that programs run faster and files open more quickly Defragmenting does not reclaim unused space on a virtual disk to reclaim unused space shrink the disk For best disk performance follow these steps 1 Runa disk defragmentation utility inside the virtual machine 2 Power off the virtual machine then defragment its virtual disks from the virtual machine settings editor VM gt Settings Select the virtual disk you want to defragment then click Defragment Note This capability works only with virtual disks not physical or plain disks 3 Runa disk defragmentation utility on the host computer Defragmenting disks may take considerable time Note The defragmentation process requires free working space on the host computer s disk If your virtual disk is contained in a single file for example you need free space equal to the size of the virtual disk file Other virtual disk configurations equire less free space Shrinking Virtual Disks f you have a virtual disk that grows as data is added you can shrink it as described in this section If you allocated all the space for your virtual disk at the time you created it you cannot shrink it Note The maximum benefit occurs when you defragment a virtual disk before you shrink it See Defragmenting Virtual Disks on page 215 Shrinking a virtual disk reclaims unused space in the virtual disk If there
367. nge virtual networking settings e The user starts the virtual machine by double clicking the configuration file vmx file or a desktop shortcut to that file The virtual machine powers on automatically At the end of the working session the user shuts down by closing the virtual machine File gt Exit It is also possible to launch VMware Workstation then open a restricted interface virtual machine from the virtual machine list or the File menu The changes needed to enable the restricted user interface must be made by a user with sufficient privileges to edit the virtual machine s configuration file and to set file permissions as described below Take the following steps to enable the restricted user interface 1 Power off the virtual machine and close the VMware Workstation window then open the virtual machine s configuration file vmx file in Notepad or another text editor Add the following line anywhere in the file gui restricted true 2 You may wish to set file permissions on the configuration file to give normal users of the system only read access to the file so they cannot manually modify the configuration 3 For the convenience of users create a shortcut to the configuration file on the desktop and give it an appropriate name 459 VMware Workstation 5 User s Manual Note Although the restricted user interface provides no access to menu and toolbar controls for the snapshot you may choo
368. node where you want this device to appear in the virtual machine A check box under Device status allows you to specify whether the device should be connected each time the virtual machine is powered on 5 Click Finish to install the new device 6 Click OK to save the configuration and close the virtual machine settings editor To remove this device launch the virtual machine settings editor select the generic SCSI device then click Remove www vmware com CHAPTER 14 Connecting Devices Using Two Way Virtual Symmetric Multiprocessing Experimental For all supported configurations of 32 bit and 64 bit host and guest operating systems running on multiprocessor host machines Workstation versions 5 5 and later provide experimental support for two way virtual Symmetric Multiprocessing Virtual SMP This enables you to assign two virtual processors to a virtual machine on any host machine that has at least two logical processors Note The following are all considered to have two logical processors e Asingle processor host with hyperthreading enabled e Asingle processor host with a dual core CPU e A multiprocessor host with two CPUs neither of which are dual core or have hyperthreading enabled Note On hyperthreaded uniprocessor hosts performance of virtual machines with Virtual SMP may be subpar Guests with more than two virtual processors are not supported in Workstation However you can power on and run mu
369. nses at uninstall 0 SERIALNUMBER Automatically enters the serial number Uninstalling VMware Workstation 5 on a Windows Host To uninstall VMware Workstation 5 use the Add Remove Programs control panel Select the entry for VMware Workstation then click Remove Follow the on screen instructions 53 VMware Workstation 5 User s Manual Installing VMware Workstation 5 on a Linux Host Getting started with VMware Workstation is simple The key steps are 1 Install the VMware Workstation software as described in Installing Workstation on a Linux Host on page 55 2 Start VMware Workstation 3 Enter your serial number You need to do this only once If you don t already have a serial number configured from a previous installation you are prompted for the serial number when you start Workstation To enter the serial number choose Help gt Enter Serial Number Note You can install Workstation without a serial number However you cannot power on a virtual machine without entering a serial number 4 Create a virtual machine using the New Virtual Machine Wizard See Creating a New Virtual Machine on page 113 5 Install a guest operating system in the new virtual machine You need the installation media CD ROM or floppy disks for your guest operating system See Installing a Guest Operating System and VMware Tools on page 137 6 Install the VMware Tools package in your virtual machine for enhanced performance See Instal
370. nstallation delete the previous vmware distrib directory before installing The default location of this directory is tmp vmware tools distrib Untar the VMware Tools tar file tar zxpf mnt cdrom VMwareTools 5 0 0 lt xxxx gt tar gz umount dev cdrom Where lt xxxx gt is the build revision number of the VMware Workstation release Note If you attempt to installa tar installation overan rpm installation or the reverse the installer detects the previous installation and must convert the installer database format before continuing 143 VMware Workstation 5 User s Manual 5 Run the VMware Tools tar installer cd vmware tools distrib vmware install pl Respond to the configuration questions on the screen Press Enter to accept the default value 6 Log off of the root account exit 7 Start X and your graphical environment 8 In an X terminal launch the VMware Tools background application vmware toolbox amp Note You may run VMware Tools as root or as a normal user To shrink virtual disks you must run VMware Tools as root su Installing VMware Tools from the Command Line with the RPM Installer The first steps are performed on the host within Workstation menus 1 Power on the virtual machine 2 After the guest operating system has started prepare your virtual machine to install VMware Tools Choose VM gt Install VMware Tools The remaining steps take place inside the virtual machine 3
371. ntage of Multiple Monitors If your host has a standard multiple monitor display you can run separate sets of virtual machines on each of the monitors To use two monitors launch two instances of VMware Workstation Start one or more virtual machines in each VMware Workstation window then drag each VMware Workstation window to the monitor on which you want to use it For the largest possible screen display switch each of the windows to quick switch mode View gt Quick Switch To switch mouse and keyboard input from the virtual machine on the first screen to the virtual machine on the second screen move the mouse pointer from one to the other You do not need to take any special steps if VMware Tools is running in both guest operating systems and if you are using the default settings for grabbing input If you have changed the defaults you may need to press Ctrl Alt to release the mouse pointer from the first virtual machine move it to the second virtual machine then click in the second virtual machine so it will grab control of mouse and keyboard input Note Multiple monitor support is experimental in this release of VMware Workstation It does not work properly with some third party desktop management software or display drivers 169 VMware Workstation 5 User s Manual 170 Note If you switch to full screen mode VMware Workstation always uses the primary display To use multiple monitors you must use either the normal w
372. nux 2 2 x Kernels The 2 2 x kernels that support parallel ports use the parport parport_pc and vmppuser modules Be sure that PC Style Hardware CONFIG_PARPORT_PC is loaded as a module as mentioned at the beginning of Using Parallel Ports on page 392 The vmppuser module is supplied by VMware Workstation to give virtual machines user level access to the parallel port To see if these modules are installed and running on your system run the 1smod command as the root user These three modules should be included in the listing of running modules You can also look at the proc modules file for the same list To load the proper modules run this command insmod k lt modulename gt If none of the listed parallel port modules is running use this command insmod k parport_pc This command inserts the three modules needed for a parallel port If you continue to see problems it is possible that the 1p module is running If it is the virtual machine cannot use the parallel port correctly To remove the 1p module run this command as the root user rmmod lp You should also ensure that the line referring to the 1p module in the etc modules conf or etc conf modules file is removed or commented out by inserting a hash character at the beginning of the line The name of the configuration file depends on the Linux distribution you are using When you reboot 393 VMware Workstation 5 User s Manual 394 the host after removing thi
373. nux systems disable forwarding by writing a 0 zero to the special file proc sys net ipv4 ip forward As root enter this command echo 0 gt proc sys net ipv4 ip forward Other Linux systems have a system configuration option that you can set The method depends on your Linux distribution You may use a control panel specify a setting at he time you compile your kernel or possibly enter a specification when you boot your system Consult your operating system documentation for details on the method o use with your particular distribution Using Filtering f the host computer has multiple network adapters it may be intentionally configured to do IP forwarding If that is the case you do not want to disable forwarding In that case to avoid packet leakage you must enable a packet filtering facility and specify that packets from the host only network should not be sent outside the host computer Consult your operating system documentation for details on how to configure packet filtering Leaks from a Virtual Machine Virtual machines may leak packets as well For example if you use Dial Up Networking support in a virtual machine and packet forwarding is enabled host only network traffic may leak out through the dial up connection To prevent the leakage be sure packet forwarding is disabled in your guest operating system 351 VMware Workstation 5 User s Manual 352 Maintaining and Changing the MAC Address of a Virtu
374. o install the appropriate guest operating systems and application software in each virtual machine and make the appropriate networking settings in each virtual machine 1 Set up four virtual machines using the New Virtual Machine Wizard Create the first virtual machine with bridged networking so it can connect to an external network using the host computer s Ethernet adapter Create the other three virtual machines without networking You will set up their virtual Ethernet adapters in later steps Start VMware Workstation and open virtual machine 1 Do not power on the virtual machine Use the virtual machine settings editor VM gt Settings to add a second virtual network adapter as described in Changing the Networking Configuration on page 336 Connect the second adapter to Custom VMnetz2 Click OK to save the configuration and close the virtual machine settings editor If VMware Workstation is not running start it Open virtual machine 2 Do not power on the virtual machine Use the virtual machine settings editor VM gt Settings to add a virtual network adapter Connect the adapter to Custom VMnet2 Click OK to save the configuration and close the virtual machine settings editor If VMware Workstation is not running start it Open virtual machine 3 Do not power on the virtual machine Use the virtual machine settings editor VM gt Settings to add a virtual network adapter Connect the adapter to Custom V
375. ocation click Browse When the field the path and filename you want to use for the new floppy image file click Finish Note By default only one floppy drive is enabled in the virtual machine s BIOS If you are adding a second floppy drive to the virtual machine click inside the virtual machine window and press F2 as the virtual machine boots to enter the BIOS setup utility On the main screen choose Legacy Diskette B and use the plus and minus keys on the numerical keypad to select the type of floppy drive you want to use Then press F1 0 to save your changes and close the BIOS setup utility www vmware com CHAPTER 8 Using Disks Connecting a CD ROM or Floppy Drive to an Image File You can use the virtual machine settings editor to connect an existing virtual CD ROM or floppy drive to an image file You can connect a virtual CD ROM drive to an ISO image file Connecting to an ISO Image File 1 Open the virtual machine settings editor VM gt Settings and select the DVD CD ROM drive you want to connect to the image file 2 Select Use ISO Image and enter the path and filename for the image file or click Browse to navigate to the file 3 Click OK to save the configuration and close the virtual machine settings editor Connecting to a Floppy Image File 1 Open the virtual machine settings editor VM gt Settings and select the floppy drive you want to connect to an image file 2 Type the pat
376. ock real time on Linux host 55 synchronize guest and host 150 Clone creating 292 creating clone in New Team Wizard 303 enable template mode 297 full 291 linked 291 network identity 295 new 292 overview 290 snapshot for linked clone 296 Clone of clone full clone of linked clone 295 Linked clone of linked clone 295 Clone template not on team 297 Clone linked snapshot 296 CODEC movie 184 Color screen colors in a virtual machine 380 Comm port See Serial connection Serial port Command line vmrun 104 VMware 102 workstation 102 Commands keyboard shortcuts 107 on the command line 102 Connect USB devices 418 Controls hiding 172 Copy text 175 virtual machine 193 194 196 197 200 virtual machine see clone 290 CPU 134 host requirement 30 provided in virtual machine 34 Creative Labs 36 389 Ctrl Alt 89 Cu text 175 D Date See Time DDNS 356 Default team location 302 team path 302 www vmware com Defragment virtual disks 215 Delete virtual machine 166 Devices adding a generic SCSI device 423 adding a generic SCSI device not detected by Workstation 424 adding configuring and removing 182 connecting and disconnecting 77 151 182 disconnecting from USB controller 421 generic SCSI device adding 428 in virtual machine 182 processor 34 provided in virtual machine 34 USB 417 Devices tab tools 151 DHCP assigning IP addresses on a virtual network 347 changing settings 341 con
377. oconnect feature does not connect it to a virtual machine the device is initially connected to the host Its name is also added to the VM gt Removable Devices menu so you can connect it to the virtual machine manually Automatic Reconnection of USB Devices When you manually connect a USB device VM gt Removable Devices Workstation retains the virtual machine s connection to the affected port on the host machine You can then suspend or power off the virtual machine or unplug the device When you plug the device back in or resume the virtual machine Workstation reconnects the www vmware com CHAPTER 14 Connecting Devices device automatically Workstation retains the connection by writing an autoconnect entry to the virtual machine s configuration vmx file If Workstation is unable to reconnect to the device for example because the device has been disconnected or moved to another port the device is removed and a message is displayed indicating that Workstation is unable to connect to the device You can connect manually to the device if it is still available Using USB with a Windows Host Windows 2000 Windows XP and Windows Server 2003 hosts When a particular USB device is connected to a virtual machine for the first time the host detects it as a new device named VMware USB Device and installs the appropriate VMware driver Windows XP and Windows Server 2003 hosts User confirmation is required in the Found New Hard
378. og on to other computers In the default configuration computers on the external network cannot initiate connections to the virtual machine That means for example that the default configuration does not let you use the virtual machine as a Web server to send Web pages to computers on the external network If you make some other selection in the New Virtual Machine Wizard and later decide you want to use NAT you can make that change in the virtual machine settings editor VM gt Settings For details see Changing the Networking Configuration on page 336 331 VMware Workstation 5 User s Manual 332 Host Only Networking Virtual Ethernet adapter once EE RE Boe Ft Virtual machine DHCP server Virtual Ethernet switch VMnet1 Host virtual adapter Host only networking creates a network that is completely contained within the host computer A host only network is set up automatically if you select Use Host only Networking in the New Virtual Machine Wizard On Linux hosts this selection is available only if you enabled the host only networking option when you installed VMware Workstation Host only networking provides a network connection between the virtual machine and the host computer using a virtual Ethernet adapter that is visible to the host operating system This approach can be useful if you need to set up an isolated virtual network If you use host only networking your virtual machine and the h
379. on New in v5 5 Windows Hosts Only 26 Enhanced Autoconnect Automatically Reconnects Manually Connected USB 27 27 27 27 27 28 28 28 28 Virtual Machine Importer Imports LiveState Recovery System Images New in v5 5 28 Toolbar Customization New in v5 5 29 Disable Memory Page Trimming in the User Interface Newinv5 5 __ 29 Support on Linux Hosts for Wireless Ethernet Adapters Used in Bridged etworking New in v5 5 29 Support for Display Resizing Features for Linux Guests New in v5 5 29 Enhanced Product Update Checking New in v5 5 29 Host System Requirements 30 PC Hardware 30 emory 31 Display 31 Disk Drives 31 Local Area Networking Optional 31 Host Operating System 32 Virtual Machine Specifications 34 Processor 34 Chip Set 34 BIOS 34 emory 34 Graphics 34 DE Drives 34 SCSI Devices 35 Floppy Drives 35 Serial COM Ports 35 Parallel LPT Ports 35 USB ports 35 eyboard 35 ouse and Drawing Tablets 36 Ethernet Card 36 Sound 36 Virtual Networking 36 Supported Guest Operating Systems 37 Support for 64 Bit Guest Operating Systems 37 icrosoft Windows 32 Bit 38 icrosoft Windows 64 Bit 38 icrosoft MS DOS 38 Linux 32 Bit 39 www ymware com Linux 64 Bit Novell Netware FreeBSD 32 Bit FreeBSD 64 Bit Sun Solaris 32 Sun Solaris 64 Technical Suppor Self Service Su Online and
380. on 5 User s Manual 234 Shrinking Virtual Disks with VMware Virtual Disk Manager On a Windows host you can use the virtual disk manager to prepare and shrink virtual disks You cannot use the virtual disk manager to prepare or shrink virtual disks located ona Linux host You cannot use the virtual disk manager to shrink physical disks Shrinking a virtual disk does not reduce the maximum capacity of the virtual disk itself For more information about shrinking see Shrinking Virtual Disks on page 215 Caution You cannot shrink a virtual disk if the virtual machine has snapshots To keep the virtual disk in its current state use the snapshot manager to delete all snapshots To discard changes made since you took a snapshot revert to the snapshot You must prepare each volume of the virtual disk drive C or D for example for shrinking before you can shrink the disk To prepare a volume for shrinking you must first mount it To mount the volume use the VMware DiskMount Utility available as a free download from the VMware Web site Go to www vmware com download diskmount htm The VMware DiskMount user s manual is available from the VMware Web site at www vmware com pdf VMwareDiskMount pdf It contains instructions on mounting and unmounting virtual disk volumes with DiskMount VMware DiskMount mounts individual volumes of a virtual disk For the best results when you shrink a virtual disk you should mount all the volumes and prepare
381. on connecting these devices see Connecting to a Generic SCSI Device on page 422 This section discusses the following topics e Adding a New Virtual Disk to a Virtual Machine on page 219 e Removing a Virtual Disk from a Virtual Machine on page 222 e Adding Physical Disks to a Virtual Machine on page 223 e Adding DVD or CD Drives to a Virtual Machine on page 226 e Adding Floppy Drives to a Virtual Machine on page 228 e Connecting a CD ROM or Floppy Drive to an Image File on page 229 Adding a New Virtual Disk to a Virtual Machine Virtual disks are stored as files on the host computer or on a network file server It does not matter whether the physical disk that holds the files is IDE or SCSI A virtual IDE drive can be stored on an IDE drive or on a SCSI drive So can a virtual SCSI drive Use the virtual machine settings editor VM gt Settings to add a new virtual disk to your virtual machine To add an existing virtual disk to the virtual machine see Adding an Existing Virtual Disk to a Virtual Machine on page 221 The virtual machine must be powered off before you begin If it is not shut down the guest operating system normally then click Power Off on the VMware Workstation toolbar Note If you have a Windows NT 4 0 guest with a SCSI virtual disk you cannot add both an additional SCSI disk and an IDE disk to the configuration 219 VMware Workstation 5 User s Manual 220 T u w N Open the virtual machine
382. one does not share virtual disks with the parent virtual machine full clones generally perform better than linked clones However full clones take longer to create than linked clones Creating a full clone can take several minutes if the files involved are large Linked Clones A linked clone is made from a snapshot of the parent See Understanding Snapshots on page 274 All files available on the parent at the moment of the snapshot continue to remain available to the linked clone Ongoing changes to the virtual disk of the parent do not affect the linked clone and changes to the disk of the linked clone do not affect the parent A linked clone must have access to the parent Without access to the parent a linked clone is disabled See Linked Clones and Access to the Parent Virtual Machine on page 296 Linked clones are created swiftly so you can easily create a unique virtual machine for each task you have You can also easily share a virtual machine with other users by storing the virtual machine on your local network where other users can quickly make a linked clone This facilitates collaboration for example a support team can reproduce a bug in a virtual machine and an engineer can quickly make a linked clone of that virtual machine to work on the bug Full Clones and Snapshots of the Parent A full clone is a complete and independent copy of a virtual machine However the full clone duplicates only the state of the virtual mac
383. onfiguration process Clones are useful when you must deploy many identical virtual machines to a group For example e AnMIS department can clone a virtual machine for each employee with a suite of preconfigured office applications e Avirtual machine can be configured with a complete development environment and then cloned repeatedly as a baseline configuration for software testing e A teacher can clone a virtual machine for each student with all the lessons and labs required for the term With clones you can conveniently make complete copies of a virtual machine without browsing a host file system or worrying if you have located all the configuration files 290 www vmware com CHAPTER 10 Cloning a Virtual Machine Full and Linked Clones There are two types of clone e A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation Ongoing operation of a full clone is entirely separate from the parent virtual machine e A linked clone is a copy of a virtual machine that shares virtual disks with the parent virtual machine in an ongoing manner This conserves disk space and allows multiple virtual machines to use the same software installation Full Clones A full clone is an independent virtual machine with no need to access the parent Full clones do not require an ongoing connection to the parent virtual machine Because a full cl
384. onfigure or launch virtual machines A system administrator performs these function See also Full screen mode Favorites list A list in the left panel of the main VMware Workstation screen that shows the names of virtual machines that a user has added to the list The Favorites list makes it easy to launch a virtual machine or to connect to the virtual machine s configuration file in order to make changes in the virtual machine settings Go to Snapshot Go toa snapshot allows you to restore any snapshot of the active virtual machine See also Revert to snapshot Guest operating system An operating system that runs inside a virtual machine See also Host operating system Host only networking A type of network connection between a virtual machine and the host Under host only networking a virtual machine is connected to the host on a private network which normally is not visible outside the host Multiple virtual machines configured with host only networking on the same host are on the same network See also Bridged networking Custom networking and Network address translation NAT www vmware com CHAPTER 17 Glossary Host machine The physical computer on which the VMware Workstation software is installed It hosts the VMware Workstation virtual machines Host operating system An operating system that runs on the host machine See also Guest operating system LAN segment A private virtual network
385. onfigured to use the physical hardware devices In order to boot such a preinstalled www vmware com CHAPTER 8 Using Disks operating system in a virtual machine you need to create separate hardware profiles in order to simplify the boot process Microsoft Windows operating systems beginning with Windows 95 and Windows NT 4 0 allow you to create hardware profiles Each hardware profile is associated with a set of known devices If more than one hardware profile exists the system prompts the user to choose between different hardware profiles at boot time Windows 95 Windows 98 Windows Me Windows 2000 Windows XP and Windows Server 2003 use Plug and Play at boot time to confirm that the actual devices match the chosen hardware profile Mismatches lead to the automatic detection of new devices Although this operation succeeds it can be fairly slow Windows NT does not have Plug and Play support and uses the hardware profiles to initialize its devices Mismatches lead to errors reported by the device drivers and the devices are disabled In order to set up hardware profiles for your physical and virtual machines follow these steps 1 Before running VMware Workstation to boot an operating system previously installed on a disk partition boot the operating system natively and create two hardware profiles which you can call Physical Machine and Virtual Machine To do this open Control Panel gt System then click the Hardware
386. onnections you need to make Enter each port setting on a separate line Considerations for Using NAT Because NAT requires that every packet sent and received from virtual machines is in the NAT network there is an unavoidable performance penalty Our experiments show that the penalty is minor for dial up and DSL connections and performance i adequate for most VMware Workstation uses n NAT is not perfectly transparent It does not normally allow connections to be initiated from outside the network although you can set up server connections by manually configuring the NAT device The practical result is that some TCP and UDP protocols that require a connection be initiated from the server machine some peer to peer applications for example do not work automatically and some may not work at all A standard NAT configuration provides basic level firewall protection because the NAT device can initiate connections from the private NAT network but devices on the external network cannot normally initiate connections to the private NAT network Using NAT with NetLogon When using NAT networking in a virtual machine with a Windows guest operating system running on a Windows host you can use NetLogon to log on to a Windows domain from the virtual machine You can then access file shares known by the WINS server in the domain To use NetLogon you need to know how WINS servers and Windows domain controllers work This se
387. onsole opens 441 VMware Workstation 5 User s Manual 442 Click the plus sign on the toolbar The Add Counters dialog box appears Add Counters Use local computer counters Select counters from computer TESTMACHINE Performance object VMware OAI counters Vitual Disk Bs Virtual Disk In the Performance object list select VMware Decide whether you want to add all counters or select specific counters from the list To use these counters for all running virtual machines select All instances To use the counters for specific virtual machines select Select instances from list then choose the virtual machines you want The names shown in the list correspond to the display names of running virtual machines Note For a brief description of each counter click Explain When you select a counter from the list a description appears below the Add Counters dialog box 6 Click Add to add the counters to the Performance console iS Performance RG Fie Action View Favorites Window Help e Am e A l Performance Logs and Alerts A Nb baer dl re Na Wo Be He A WN 268435456 Average 268435456 Minimum 268435456 Maximum 268435456 Duration 1 40 Instance _ Parent ject _ Computer Virtual Disk Writes sec SUSE Lin VMware PUBS XP Network Packets Receivedisec SUSE Lin VMware IPUBS XP Network Packets Received sec Windows VMware PUBS XP Network Packets S
388. open the new virtual machine you just created Choose File gt Open then browse to the virtual machine s configuration vmx file 193 VMware Workstation 5 User s Manual 194 Moving a Workstation 5 Virtual Machine to a New Host 1 ake sure VMware Workstation is installed and working correctly on the new host computer Create a directory for the virtual machine you are moving Locate the virtual disk files you are moving and copy them into the new directory Be sure to copy all the files in the virtual machine s original directory If you stored any files in irectories other than the virtual machine directory be sure to move them into a Q Q irectory of the same name and same position relative to the location of the virtual machine If for some reason you are not moving a file make sure you do not have any paths pointing to that file Use the virtual machine settings editor and check to see if your virtual machine is pointing to the correct location for files you do not move In the virtual machine settings editor select each device and be sure that any devices with associated files are pointed to the correct files Also check the Options tab to be sure the location for the redo log file is correct Note If you have taken a snapshot of the virtual machine be sure to move all files in the virtual machine s directory Start VMware Workstation and open the virtual machine you just moved Choose File gt Open
389. open the virtual machine s configuration file vmx in a text editor and make the changes as described below 1 3 The virtual machine does not contain any SCSI adapters or devices or you want to add a generic SCSI device to a new virtual SCSI adapter in the virtual machine In this case to add the device to the virtual machine you need to add the following lines to the virtual machine s configuration file scsiZ Y present true scsiZ Y deviceType scsi passthru scsiZ Y fileName scsiX Y scsiZ present true Define X Y and Z as follows e X is the SCSI bus the device uses on the host system e Y is the target ID the device uses in the virtual machine and on the host Use the same target ID in the virtual machine that the host already uses for the device to allow the device to work correctly e Z is the SCSI bus the device uses in the virtual machine The virtual machine has a SCSI adapter and a SCSI device and you want to use the same device as a generic SCSI device In this case to configure the device as a generic SCSI device you need to add the following lines to the virtual machine s configuration file scsiZ Y deviceType scsi passthru scsiZ Y fileName scsixX Y Define X Y and Z as follows e X is the SCSI bus the device uses on the host system e Y is the target ID the device uses in the virtual machine and on the host Use the same target ID in the virtual machine that the host already u
390. options ethernet n generatedAddress ethernet n addressType ethernet n generatedAddressOffset uuid location uuid bios ethernet n present In these options n is the number of the virtual Ethernet adapter for example etherneto Note To preserve a virtual Ethernet adapter s MAC address you also must be careful not to remove the adapter If you remove the adapter then recreate it the adapter may receive a different MAC address www vmware com CHAPTER 12 Configuring a Virtual Network Manually Assigning a MAC Address If you want to guarantee that the same MAC address is assigned to a given virtual machine every time even if the virtual machine is moved or if you want to guarantee a unique MAC address for each virtual machine within a networked environment you can assign the address manually instead of allowing VMware Workstation to assign it automatically To assign the same unique MAC address to any virtual machine manually use a text editor to remove three lines from the configuration file and add one line The configuration file has a vmx extension at the end of the filename On a Linux host a virtual machine created with an earlier VMware product may have a configuration file with a cfg extension Remove the three lines that begin with the following from the configuration file ethernet n generatedAddress ethernet n addressType ethernet n generatedAddressOffset In these
391. options n is the number of the virtual Ethernet adapter for example etherneto Add the following line to the configuration file ethernet n address 00 50 56 XX YY 2Z In this line XX must be a valid hexadecimal number between 00h and 3Fh and YY and ZZ must be valid hexadecimal numbers between 00h and FFh Because VMware Workstation virtual machines do not support arbitrary MAC addresses you must use the above format So long as you choose a value for XX YY ZZ that is unique among your hard coded addresses where XX is a valid hexadecimal number between 00h and 3Fh and YY and ZZ are valid hexadecimal numbers between 00h and FFh conflicts between the automatically assigned MAC addresses and the manually assigned addresses should never occur 353 VMware Workstation 5 User s Manual Controlling Routing Information for a Host only Network ona Linux Host A host only network is a full fledged network It has a network interface associated with it VMnet1 that is marked up at the time the host operating system is booted Consequently routing server processes that operate on the host operating system such as routed and gated automatically discover it and propagate information on how to reach it unless you explicitly configure them not to do so f either of these programs is being run only to receive routing information the easiest solution is to run it with a q option so that it does not supply routing informat
392. or suspended VMware Workstation lets you take snapshots of a virtual machine at any time and revert to that snapshot at any time You can take a snapshot when a virtual machine is powered on powered off or suspended Configurations are available to exclude a disk from snapshots www vmware com CHAPTER 17 Glossary Snapshot manager The snapshot manager is a window that allows you to take actions on any of the snapshots associated with the selected virtual machine See also Snapshot Suspend Saves the current state of a running virtual machine To return a suspended virtual machine to operation you use the resume feature See also Resume Teams A group of virtual machines that are configured to operate as one object You can power on power off and suspend a team with one command You can configure a team to communicate independently of any other virtual or real network by setting up a LAN segment See also LAN segment Virtual Network Template A virtual machine that cannot be deleted or added to a team Setting a virtual machine as a template protects any linked clone or snapshots from being disabled inadvertently See also Linked clone Parent and Snapshot Virtual disk A file or set of files appearing as a physical disk drive to a guest operating system These files can be on the host machine or on a remote file system When you configure a virtual machine with a virtual disk you can install a new operat
393. organize and access frequently used items Paver x Legacy virtual E Windows A f E Longhorn experimental machine icon 1 E windows 2000 Professional 3 GD Windows xP Home Edition D rofessional Powered on icon Linux Close E Mandrake 9 RHELS W59 Teens Power Off E Client Server Suspend amp 3 Stier Private Ne Reset h vmo11708 G ymoz09 LinkedClone B Clone of vm0209b 4 Suspended icon Take Snapshot Snapshot Manager Capture Screen Capture Movie Install VMware Tools Rename Clone Remove from Favorites Settings New gt The Favorites list Fast access Like bookmarks in a web browser the Favorites list helps you quickly access frequently used items With your virtual machines and teams on the Favorites list you can open them without browsing the host file system Also like browser bookmarks Favorites list icons can be organized in folders added rearranged or deleted without affecting the items they open Status The Favorites list displays the status of virtual machines and teams by using different icons A Favorites list icon indicates whether the team or virtual machine is powered off powered on or suspended The icon also indicates 83 VMware Workstation 5 User s Manual 84 whether the virtual machine is a legacy virtual machine that needs to be upgraded to use all the features of the current Workstation version e Right cl
394. orking state of the project when newly added code does not work as expected Another example of using snapshots is a linear process is a computerized training course You can take snapshots of each lesson starting point so you can instantly revert to the appropriate place for each student skipping lengthy computer preparation time 00 Chapter 1 Chapter 4 Chapter 5 Snapshots as restore points in a linear process VMware Workstation supports over 100 snapshots per linear process Snapshots in a Process Tree Another way to use snapshots is shown in the following figure Here instead of saving each step of a process in a single long sequence you are saving a number of sequences as branches from a single baseline This strategy is often used in testing www ymware com CHAPTER 9 Preserving the State of a Virtual Machine software for example You can take a snapshot before installing different versions of a program to ensure each different installation begins from an identical baseline m Windows XP Baseline IE Base Pro prn Mozila Base _ Netscape L m m SPI IE Basel peaa Mozila Netscape Basel __ SP2 IE Base m Mozilla L E Netscape Base2 Snapshots as restore points in a process tree VMware Workstation supports over 100 snapshots per branch in a process tree Relationship Between Snapshots The relationship between snapshots is like parent to child In a li
395. ost to a Virtual Machine Connecting Two Virtual Machines Special Configuration Options for Advanced Users Examples Debugging over a Virtual Serial Port Keyboard Mapping on a Linux Host Quick Answers The Longer Story V Scan Code Table Using USB Devices in a Virtual Machine Notes on USB Support in Version 5 Enabling and Disabling the USB Controller Connecting USB Devices Usin Replacing USB 2 0 Drivers on a Windows 2000 Host g USB with a Windows Host 389 391 392 392 392 393 396 397 397 398 400 402 405 407 409 409 409 it VO O CO ON N W 13 Using USB with a Linux Host What Has Control over a USB Device Disconnecting USB Devices from a Virtual Machine Human Interface Devices Connecting to a Generic SCSI Device Generic SCSI on a Windows Host Operating System Generic SCSI on a Linux Host Operating System Using Two Way Virtual Symmetric Multiprocessing Experimental Moving SMP Virtual Machines between Workstation and ESX Server Performance Tuning Configuring and Maintaining the Host Computer Location of the Working Directory Defragmentation of Disk Drives Adequate Free Disk Space Overcommitting the Host Processors IC Interrupt Coalescing Configuring VMware Workstation General VMware Workstation Options VMware Workstation on a Windows Host VMware Workstation on a Linux Host Monitoring Virtual Machine Performance Memory Usag
396. ost virtual adapter are connected to a private Ethernet network Addresses on this network are provided by the VMware DHCP server If you make some other selection in the New Virtual Machine Wizard and later decide you want to use host only networking you can make that change in the virtual machine settings editor VM gt Settings For details see Changing the Networking Configuration on page 336 Routing and Connection Sharing If you install the proper routing or proxy software on your host computer you can establish a connection between the host virtual Ethernet adapter and a physical network adapter on the host computer This allows you for example to connect the virtual machine to a Token Ring or other non Ethernet network On a Windows 2000 Windows XP or Windows Server 2003 host computer you can use host only networking in combination with the Internet connection sharing feature in Windows to allow a virtual machine to use the host s dial up networking adapter or other connection to the Internet See your Windows documentation for details on configuring Internet connection sharing www vmware com CHAPTER 12 Configuring a Virtual Network Custom Networking Configurations The virtual networking components provided by VMware Workstation make it possible for you to create sophisticated virtual networks The virtual networks can be connected to one or more external networks or they may run entirely on the host computer
397. ot must be from a virtual machine that is powered off You cannot make a clone from a snapshot of a virtual machine that is powered on 1 Choose VM gt Snapshot gt Snapshot Manager 2 Select the snapshot to clone 3 Click Clone 4 Click OK in the confirmation dialog box See Cloning a Virtual Machine on page 289 286 www vmware com Virtual Machine Settings for Snapshots CHAPTER 9 Preserving the State of a Virtual Machine In the virtual machine settings editor you can disable snapshots and set the virtual machine to revert to a snapshot when you power off The following sections describe these options Virtual Machine Settings Hardware Options Settings El General D Power E Shared Folders Snapshots A Guest isolation BB Advanced Summary Windows XP Pro SP2 Enabled Drag and drop enabled Nosmal Nomal Template Disabling Snapshots VMware Workstation speed and response times are improved when snapshots are disabled However all changes made to a virtual machine are permanent and you cannot restore an earlier state To disable snapshots go to VM gt Settings gt Options gt Snapshots General To disable the snapshot feature this virtual machine must not currently have a snapshot When powering of dust power off O Revert to snapshot O Take a new snapshot O Ask me e If no snapshots exist for the selected virtual machine you can disable snapshot functionality by selectin
398. ou can install VMware Tools by choosing VM gt Install VMware Tools 449 VMware Workstation 5 User s Manual 450 DMA Mode for IDE Disks Windows 95 OSR2 and later including Windows 98 can use direct memory access DMA for faster access to IDE hard disks However this feature may not be enabled by default You can turn on DMA access using the guest operating system s Device Manager aff 2 D ight click My Computer and choose Properties from the pop up menu ick the sign beside Disk Drives to show your virtual machine s individual ives nder Settings check the box labeled DMA and accept any warning Windows isplays 5 Restart Windows for the new settings to take effect d 3 Right click the entry for each IDE drive to open its Properties dialog box U d Full Screen Mode Run your virtual machine in full screen mode Click the Full Screen button on the VMware Workstation toolbar Swap File Usage In your system ini file in the 386enh section add the following line Conservat iveSwapFileUsage 1 Visual Effects Windows 98 has a number of visual effects designed to be attractive that place unnecessary demands on the graphics emulation in VMware Workstation Some users have seen performance improvements when they turn off these special effects To modify these settings right click on the desktop of your virtual machine then select Properties from the pop up menu Click the Effects tab and unch
399. ou delete the snapshot performance is again similar to that of the underlying disk Overall if no snapshot exists and you are using physical disks or virtual disks with all the space allocated in advance you see somewhat better performance than that provided by other configurations Disk writes may be slower for virtual disks that do not have all space allocated in advance However you can improve performance for these disks by defragmenting them from the virtual machine settings editor Choose VM gt Settings select the disk you want to defragment then click Defragment 437 VMware Workstation 5 User s Manual 438 Remote Disk Access Whenever possible do not use disks that are on remote machines and accessed over the network unless you have a very fast network If you must run disks remotely choose VM gt Settings gt Options select General and set the Working directory to a directory on your local hard disk Then take a snapshot After you take the snapshot changes you make are stored locally in the working directory Snapshot If you do not need to use the snapshot feature it is best to run your virtual machine with no snapshot This provides best performance To be sure a virtual machine has no snapshot choose VM gt Snapshot gt Snapshot Manager If you see a snapshot you do not want select it and click the Delete button Defragmentation See Defragmentation of Disk Drives on page 432 for information about keeping
400. ou should boot the guest operating system natively on the computer and create a hardware profile for the virtual machine before proceeding 2 Check to see what SCSI ID is set for the drive you plan to use in the virtual machine 3 Make certain that in addition to any SCSI drivers you have configured for the host you have also installed the driver for the LSI Logic or BusLogic virtual adapter you plan to use in the virtual machine Drivers for LSI Logic controllers are available from the LSI Logic Web site www lsilogic com In the download area of the site find a driver for any of the adapters in the LSIS3C10xx Ultra320 SCSI I O controller series for example the LSI53C1000 Note Drivers for a Mylex BusLogic compatible host bus adapter are not obvious on the LSI Logic Web site Search the support area for the numeric string in the model number For example search for 958 for BT KT 958 drivers The LSI Logic or BusLogic driver needs to be installed in the profile for the guest operating system 257 VMware Workstation 5 User s Manual 258 Note To use the virtual BusLogic SCSI adapter in a Windows XP or Windows Server 2003 virtual machine you need a special SCSI driver available from the download section of the VMware Web site www vmware com download Check operating system partition mounts Be sure the existing physical disk partitions that you plan to configure the virtual machine to use are not moun
401. ounted by Linux www vmware com CHAPTER 8 Using Disks 4 Set the device group membership or device ownership The master physical disk device or devices need to be readable and writable by the user who runs VMware Workstation On most distributions the physical devices such as dev hda IDE physical disk and dev sda SCSI physical disk belong to group id disk If this is the case you can add VMware Workstation users to the disk group Another option is to change the owner of the device Please think carefully about security issues when exploring different options here Often the most convenient approach is to grant VMware Workstation users access to all dev hd abcd physical devices that contain operating systems or boot managers and then rely on VMware Workstation s physical disk configuration files to guard access This provides boot managers access to configuration files and other files they may need to boot the operating systems For example LILO needs to read boot ona Linux partition to boot a non Linux operating system that may be on another drive As noted above you should consider the security implications of the configuration you choose 5 Ifyou plan to run a second Linux installation from an existing partition as a guest operating system and your physical computer s etc lilo conf hasa memory register statement such as Append mem you may want to adjust the append memory parameter or create a new entry in LIL
402. our host is configured configure a virtual machine for accelerated 3 D 385 VMware Workstation 5 User s Manual Enabling Accelerated 3 D for a Virtual Machine To enable a virtual machine for accelerated 3 D 1 Choose a virtual machine with Windows 2000 or XP guest operating system Note Do not enable Direct3D on a virtual machine that is powered on or suspended Add the following to the configuration vmx file for the virtual machine mks enable3d TRUE This line enables accelerated 3 D on the host It is required to support accelerated 3 D in the guest and also enables the host to accelerate 2 D portions of the guest display You may also add one or both of the following optional lines svga vramSize 67108864 This line increases the amount of VRAM on the virtual display card to 64 MB Adding more VRAM helps to reduce thrashing in the guest The maximum value is 128 MB vmmouse present FALSE This line disables the absolute pointing device in the guest Applications which require DirectInput relative mode need to turn off the absolute pointing device in the guest In practice this is only required for a certain class of full screen 3 D applications for example real time games like first person shooters Note If you set the vmmouse present option you should also turn off the preference for motion ungrabbing in the Input tab of the Preferences settings dialog To turn off ungrabbing for vmouse present a
403. our virtual disks before starting the upgrade 68 www vmware com CHAPTER 3 Upgrading VMware Workstation Procedure to Upgrade Virtual Machines 1 Shut down the guest operating system and power off the virtual machine 2 Choose VM gt Upgrade Virtual Machine A dialog box appears warning that the upgrade process cannot be reversed 3 Click Yes to continue then follow the on screen directions 4 Power on the virtual machine in Workstation 5 5 Upgrade VMware Tools to the new version Refer to Installing VMware Tools on page 140 Do not remove the older version of VMware Tools before installing the new version Note If you are upgrading a virtual machine that runs from a physical disk rather than a virtual disk you may safely ignore the message Unable to upgrade lt drivename gt One of the supplied parameters is invalid Click OK to continue the upgrade 69 VMware Workstation 5 User s Manual Where to Go Next e Learning VMware Workstation Basics on page 71 e Creating a New Virtual Machine on page 113 e Running VMware Workstation on page 157 70 www vmware com CHAPTER Learning VMware Workstation Basics This chapter discusses launching the VMware Workstation program and introduces the VMware Workstation window Launching VMware Workstation on page 72 Overview of the VMware Workstation Window on page 74 Checking for Product Updates on page 86 Setting Preferences for VMware Workstation o
404. ous operating systems can be complex That is why it is safest to configure SCSI physical disks in a virtual machine using the same SCSI ID as they use on the host www vmware com Installing an Operating System ona Physical Partition from a Virtual Machine In some situations you may want to install a guest operating system directly on a physical disk or partition even if you do not need to boot that disk on the host outside of the virtual machine It is possible to use either an unused partition or a completely unused disk on the host as a disk in the virtual machine However it is important to be aware that an operating system installed in this setting probably cannot boot outside of the virtual machine even though the data is available to the host If you have a dual boot system and want to configure a virtual machine to boot from an existing partition see Configuring a Dual Boot Computer for Use with a Virtual Machine on page 237 The instructions in this section do not apply to a disk with a previously installed operating system Caution Physical disks are an advanced feature and should be configured only by expert users VMware Workstation uses description files to control access to each physical disk on the system These description files contain access privilege information that controls a virtual machine s access to certain partitions on the disks This mechanism prevents users from accidentally running the host operating s
405. ow e Displaying the Home Page on page 76 e Displaying the Summary View on page 76 e Displaying the Console View on page 78 Displaying the Home Page In the Workstation window select the Home tab to display the Workstation home page Use the icons on the home page to start creating a new virtual machine or open an existing virtual machine To close the home page click the X to the right of the tabs on a Windows host or the X on the tab on a Linux host To display the home page again choose View gt Go to Home Tab Displaying the Summary View When you select a tab for a powered off virtual machine or team Workstation displays a summary of the configuration information about that item Workstation also displays a summary for a suspended virtual machine or team Summary toolbar button I Windows 98 VMware Workstation GEA Fie Edt View VM Team Windows Help es MESIT ECER o windows 93 gt x E Teams 88 27 Client Server Windows 98 8 3T Ghent Server DB E Linux vms E Mandrake Linux RHEL3 clean install RHEL3 gold State Powered off Guest 05 Windows 98 Configuration file D My Virtual Machines wingese wing8 vmx Version Current virtual machine for VMware Workstation 5 0 0 Commands Devices D gt Start this virtual machine memory 256 MB TB Edt virtual machine settings Hard Disk IDE 0 0 f Clone this virtual machine Qsco Rom 10E 0 1 Using drive F co rom 2 IDE 1 0 Using drive E Floppy Using drive A
406. ower Off on the VMware Workstation toolbar Caution Physical disks are an advanced feature and should be configured only by expert users 1 Open the virtual machine settings editor VM gt Settings and click Add The Add Hardware Wizard guides you through the steps to create your virtual disk Click Hard Disk then click Next Add Hardware Wizard Select a Disk Which disk do you want this drive to use Disk O Create a new virtual disk A vitual disk is composed of one or more files on the host fie system which wil appear as a single hard disk to the guest operating system Virtual disks can easily be copied or moved on the same host or between hosts O Use an existing virtual disk Choose this option to reuse a previously configured disk Use a physical disk for advanced users Choose this option to give the vitual machine direct access to a local hard disk Select Use a physical disk then click Next SUSE Linux WARNING Use of this feature is for advanced users only and may cause loss of data or inabilty to boot particularly when this raw disk partition is used as the boot device Only limited support is available for this feature For the most current documentation please see http www vmware com info id 127 and click the link Installing an Operating System onto a Physical Partition from a Virtual Machine A warning appears Click OK Select the physical disk characteristics and clic
407. ows hosts and enhanced with the ability to create VMware virtual machines from system images created with Symantec LiveState Recovery If you have upgraded Workstation to version 5 5 you no longer need the standalone VMware Virtual Machine Importer application you can import virtual machines and system images directly from Workstation as described in the following sections If you have not upgraded your Workstation program to version 5 5 the standalone VMware Virtual Machine Importer is available as a download from the VMware Web site at www vmware com download You can download the user s manual that accompanies the standalone importer at www vmware com pdif vm_importer_manual pdf Note Although Workstation version 5 5 includes the importer the standalone VMware Virtual Machine Importer v1 5 is compatible with Workstation 5 5 You can install both programs on the same machine The Windows control panel Add or Remove Programs will contain entries for VMware Virtual Machine Importer 1 5 and Workstation 5 5 The Virtual Machine Importer files will remain until you uninstall both the importer and Workstation applications Caution The standalone VMware Virtual Machine Importer v1 0 is not compatible with Workstation 5 5 If you currently have Workstation 5 5 installed do not attempt to install VMware Virtual Machine Importer v1 0 The version 1 0 importer cannot be installed over Workstation 5 5 Attempting this installation will damage th
408. peed at which the virtual machine sends data through the virtual serial port In practice the output speed depends on how fast the application at the other end of the pipe reads data inbound to it lt n gt is the number of the serial port starting from 0 So the first serial port is serialo lt x gt is any positive integer It specifies the time taken to transmit a character expressed as a percentage of the default speed set for the serial port in the guest operating system For example a setting of 200 forces the port to take twice as long per character or send data at half the default speed A setting of 50 forces the port to take only half as long per character or send data at twice the default speed You should first use the guest operating system to configure the serial port for the highest setting supported by the application you are running in the virtual machine Once the serial port speed is set appropriately in the guest operating system experiment with this setting Start with a value of 100 and gradually decrease it until you find the highest speed at which your connection works reliably www vmware com CHAPTER 14 Connecting Devices Examples Debugging over a Virtual Serial Port You can use Debugging Tools for Windows WinDbg or Kernel Debugger KD to debug kernel code in a virtual machine over a virtual serial port You can download Debugging Tools for Windows from the Windows DDK Web site at www microsoft co
409. perating systems or applications Use the New Virtual Machine Wizard to configure VMware Workstation to use existing physical disk partitions The wizard guides you though creating a configuration for a new virtual machine including configuring the physical disk description files Typically you rerun the wizard to create a separate configuration for each guest operating system installed on a physical partition f a boot manager is installed on the computer system the boot manager runs inside the virtual machine and presents you with the choice of guest operating systems to un You must manually choose the guest operating system that this configuration was intended to run This section continues with the following topics e Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks on page 241 e Using the LILO Boot Loader on page 242 e Configuring a Windows Host on page 242 e Configuring a Linux Host on page 244 Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks If your host is running Windows 2000 Windows XP or Windows Server 2003 and is using dynamic disks see Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 241 VMware Workstation 5 User s Manual 242 Using the LILO Boot Loader If you are using the LILO boot loader and try to boot a virtual machine from an existing physical partition you may see L 01 01 01 01 01 01 instead of a LILO prompt
410. ple a user may have swapped Ctrl and Caps Lock using xmodmap This means the keys are swapped in the virtual machine when using a remote server keysym mapping but unswapped when using a local server key code mapping 411 VMware Workstation 5 User s Manual Therefore keysym mapping is necessarily imperfect To make up for this defect you can change most of the behavior using configuration settings xkeymap language lt keyboard type gt Use this if VMware Workstation has a table in xkeymap for your keyboard but can t detect it lt keyboard type gt must be one of the tables in the xkeymap directory See above for location However the failure to detect the keyboard probably means the table isn t completely correct for you xkeymap keysym lt sym gt lt v scan code gt If you use keysym mapping map keysym lt sym gt to lt v scan code gt When you do lt sym gt must be an X keysym name and lt v scan code gt should bea C syntax hexadecimal number for example 0x001 The easiest way to find the keysym name for a key is to run xev or xmodmap pk The X header file usr X11R6 include X11 keysymdef hhasa complete list of keysyms The name of a keysym is the same as its C constant without the XK_ prefix Most v scan codes are in V Scan Code Table on page 413 The xkeymap tables themselves are also helpful Use them to fix small errors in an existing mapping xkeymap fileName lt file path gt Use the k
411. ple instances of VMware Workstation You can even run multiple instances of VMware Workstation and have more than one virtual machine in each window Just be sure you have enough memory and processor power to handle the number of virtual machines you want to run www vmware com CHAPTER 4 Learning VMware Workstation Basics The Workstation window is divided into three sections The Home Page Summary View and Console View On the right this main part of the window shows your virtual machines The Toolbar At the top these buttons act on your virtual machines offering one click options for power suspend snapshot screen and summary console display The Favorites List In this area on the left you can bookmark your virtual machines and teams of virtual machines for quick access El suse91 VMware Workstation Fie Edt View VM Team Windows Hep Toolbar a upe S amp P OB m R 2T Client Server E 3T Client Server DB i E Linux vies GB Mandrake Linux Support Favorites ee E suse91 Session Edit View Bookmarks Settings Help Home Page aces linux If E wink template Summary or amp wen E even Console view A Root Console Workstation window sections toolbar favorites list and home page summary consol 75 VMware Workstation 5 User s Manual 76 The Home Page Summary View and Console View VMware Workstation displays three views in the main part of the wind
412. ple vmrun commands you can now quickly create delete list and go to specific snapshots See Command Line Application on page 104 Autodetect Functionality for More Devices New in v5 5 Workstation extends existing autodetect support for CD ROM drives to other hardware devices In the virtual machine settings editor VM gt Settings you can now set a virtual machine to detect the following hardware devices automatically e CD ROM drive e Floppy drive Sound adapter e Parallel port e Serial port www vmware com CHAPTER 1 Introduction and System Requirements Enhanced Autoconnect Automatically Reconnects Manually Connected USB Devices New in v5 5 When you manually connect a USB device in Workstation 5 5 Workstation retains the virtual machine s connection to the affected port on the host machine You can then suspend or power off the virtual machine or unplug the device When you plug the device back in or resume the virtual machine Workstation reconnects the device automatically See Automatic Reconnection of USB Devices on page 418 Movie Record and Playback Workstation 5 offers the ability to record your actions within a virtual machine and save the movie in an AVI format facilitating team collaboration Replay the resulting AVI file on any PC equipped with an AVI player A free Windows player is available for download from the VMware Web site Record steps to reproduce defects in a particular configuration o
413. pport 64 bit guest operating systems As with other Workstation version 5 features you must upgrade legacy virtual machines as described in Use a Legacy Virtual Machine with Upgrade on page 68 If your virtual machine was created in Workstation 5 0 you do not need to upgrade the virtual machine to version 5 5 for 64 bit guest support However you do need to upgrade the Workstation 5 0 program software to version 5 5 You can install the Workstation 5 5 software directly over the Workstation 5 0 software Using a Legacy Virtual Machine without Upgrading Workstation 5 can power on an unmodified legacy virtual machine allowing you to share a virtual machine with users of Workstation 4 x GSX Server 3 x ESX Server 2 x and ACE 1 x However Workstation 5 features are not available in this legacy virtual machine Note When you are running a legacy virtual machine Workstation 5 indicates that VMware Tools is out of date Do not upgrade your VMware Tools if you want to continue using the virtual machine on Workstation 4 x GSX Server 3 x ESX Server 2 x and VMware ACE 1 x Creating a Legacy Virtual Machine with Workstation 5 Workstation 5 can create a new virtual machine to use in Workstation 4 x GSX Server 3 x ESX Server 2 x and VMware ACE 1 x However the new features of Workstation 5 are not available in this legacy virtual machine See Setting Up a New Virtual Machine on page 114 for a discussion of creating a new virtual machine
414. pports drag and drop or from applications such as zip file managers that support drag and drop extraction of individual files When you drag a file or folder from host to virtual machine or from virtual machine to host Workstation copies the file or folder to the location where you drop it This means for example that if you drop a file on the desktop icon of a word processor the word processor opens with a copy of the original file The original file does not reflect any changes you make to the copy Initially the application opens using a copy of the file that is stored in your temp directory as specified in the TEMP environment variable To protect any changes you make choose File gt Save As from the application s menu and save the file in a different directory Otherwise it may be overwritten or deleted by mistake To disable or enable drag and drop for a virtual machine 1 Open the virtual machine settings editor VM gt Settings click the Options tab and select Guest isolation 2 Select Disable drag and drop to and from this virtual machine to disable the feature Deselect it to enable the feature 181 VMware Workstation 5 User s Manual 182 Using Devices in a Virtual Machine Follow the guidelines in this section to add remove configure connect and disconnect your virtual machine s devices Adding Configuring and Removing Devices in a Virtual Machine In the virtual machine settings edi
415. prove VMware disk performance in particular especially when VMware is making heavy use of the disk Caution Power outage or equipment failure could result in data loss or corruption with this option enabled 439 VMware Workstation 5 User s Manual 440 VMware Workstation on a Linux Host Note The items in this section describe performance of VMware Workstation on a Linux host For tips on configuring VMware Workstation on a Windows host see VMware Workstation on a Windows Host on page 438 Using Full Screen Mode Full screen mode is faster than window mode As a result if you do not need to have your virtual machine and your host sharing the screen try switching to full screen mode Note The extreme case of this is VGA mode VGA mode is any mode in which the screen is in text mode DOS for example or Linux virtual terminals or 16 color 640 x 480 graphics mode for example the Windows 95 or Windows 98 clouds boot screen or any guest operating system that is running without the SVGA driver provided by VMware Tools On a Linux host full screen VGA mode uses the underlying video card directly so graphics performance is quite close to that of the host By contrast window mode VGA requires more computer resources to emulate than window mode SVGA As a result if you need to run for an extended period of time in VGA mode for example when you are installing an operating system using a graphical installer you should see a si
416. pshots on page 276 e What Is Captured by a Snapshot on page 277 e Snapshots and Other Activity in the Virtual Machine on page 277 e Taking a Snapshot on page 278 e The Snapshot Manager on page 280 e Restoring a Snapshot Revert or Go To on page 285 e Virtual Machine Settings for Snapshots on page 287 e Deleting Snapshots on page 286 e Making a Clone from a Snapshot on page 286 e Snapshots and Legacy Virtual Machines on page 288 273 VMware Workstation 5 User s Manual 274 Understanding Snapshots Taking a snapshot saves the current state of the virtual machine so you can return to it at any time Snapshots are useful when you need to revert a virtual machine repeatedly to the same state but you don t want to create multiple virtual machines If you simply want to save the current state of your virtual machine temporarily so you can continue work later from the same state see Using Suspend and Resume on page 272 You can take multiple snapshots of a virtual machine to save any state you might want to return to Note To take snapshots of multiple virtual machines for example taking snapshots for all members of a team requires that you take a separate a snapshot of each team member Snapshots in a Linear Process One common use of snapshots is in a development process as a way to save each step ina linear process That way as you add new untested code to a project you can always revert to a prior known w
417. pter you want to remove 4 Click Remove 5 Click OK to save your changes and close the virtual network editor Choosing a Host Ethernet Adapter for Custom Bridged Networking You can create a custom bridged network on virtual switches VMnet2 to VMnet7 To designate a physical Ethernet adapter to bridge to custom virtual switches 1 Choose Edit gt Virtual Network Settings 2 Click the Host Virtual Network Mapping tab 3 Choose an adapter from the drop down list beside the name of the virtual switch you want to use Caution Be careful when you change the bridged adapter mappings If you re assign a physical Ethernet adapter to a different virtual network any virtual machine using the original network loses its network connectivity via that network You must then change the setting for each affected virtual machine s network adapter individually This can be especially troublesome if your host has only one physical Ethernet adapter and you reassign it to a VMnet other than 340 www vmware com CHAPTER 12 Configuring a Virtual Network VMnet0 even though the VMnet still appears to be bridged to an automatically chosen adapter the only adapter it can use has been assigned to another VMnet 4 Click OK to save your changes and close the virtual network editor Changing Subnet or DHCP Settings for a Virtual Network To make changes to the subnet or the DHCP settings for a virtual network 1 Click the button on the right that cor
418. ption and thumbnail screenshot If you have not selected a snapshot these fields are blank 283 VMware Workstation 5 User s Manual 284 Command Buttons The snapshot manager has three command buttons Take Snapshot Delete and Clone Note In the Linux snapshot manager command buttons are displayed at the top In the Windows snapshot manager command buttons are on the right side Button Description Delete Removes the selected snapshots The state of the virtual machine represented by that snapshot is no longer available Clone Creates a completely independent copy of the virtual machine from the selected snapshot See Cloning a Virtual Machine on page 289 Take Snapshot Creates a snapshot See Taking a Snapshot on page 278 Navigation Region This area contains buttons to navigate out of the dialog box GoTo opens the selected snapshot and powers on the virtual machine discarding the current state Close closes the snapshot manager Help opens the Workstation help system You Are Here Icon The You Are Here icon always represents the current and active state of the virtual machine The You Are Here icon is always selected and visible when you open the snapshot manager You cannot go to or select the You Are Here state The You Are Here icon does not represent a snapshot but rather the virtual machine state after the parent snapshot see The Parent Snapshot on pa
419. purpose configuration that requires you to use an independent disk you must power off the virtual machine before taking a snapshot Changing Disk Mode to Exclude Virtual Disks from Snapshots Before you attempt to change the disk mode you must power off the virtual machine and delete any existing snapshots To exclude a disk from all snapshots 1 2 3 4 Choose VM gt Settings Select the drive you want to exclude Click Advanced Select Independent on the advanced settings panel You have the following options for an independent disk e Persistent changes are immediately and permanently written to the disk All changes to an independent disk in persistent mode remain even when you revert to a snapshot e Nonpersistent current changes to the disk are discarded when you power off or revert to a snapshot 279 VMware Workstation 5 User s Manual 280 The Snapshot Manager In the snapshot manager VM gt Snapshot gt Snapshot Manager you can review all snapshots for the active virtual machine and act on them directly E vm01170a Snapshot Manager 0 A A ass ail Fail X GY snapshot manager 7 da x Zoomin Zoom Out Test Case 2 Pass Test Case 3 Test Case4 You Are Pass ass Here Snapshot created Thu 03 Feb 2005 07 18 33 PM PST Snapshot created 2 14 2005 3 54 51 AM Name Test Case 3 Fail Name Snapshot for xppro3 Description ia a i D Clone Delete Description
420. r need to know the file names or locations for your virtual machine files Virtual machine file management is performed by VMware Workstation If the behind the scenes file structure is not interesting to you skip this section A virtual machine typically is stored on the host computer in a set of files usually in a directory created by Workstation for that specific virtual machine The key files are listed here by extension In these examples lt vmname gt is the name of your virtual machine Extension log File Name lt vmname gt log or vmware log Description This is the file that keeps a log of key VMware Workstation activity This file can be useful in troubleshooting if you encounter problems This file is stored in the directory that holds the configuration vmx file of the virtual machine nvram lt vmname gt nvram or nvram This is the file that stores the state of the virtual machine s BIOS www vmware com CHAPTER 4 Learning VMware Workstation Basics Extension File Name Description vmdk lt vmname gt vmdk This is a virtual disk file which stores the contents of the virtual machine s hard disk drive A virtual disk is made up of one or more vmdk files If you have specified that the virtual disk should be split into 2GB chunks the number of vmdk files depends on the size of the virtual disk As data is added to a virtual disk the vmdk fil
421. r record configuration steps prior to running an application Share the movie with colleagues to enable team collaboration See Creating a Movie of a Virtual Machine on page 183 Improved Linux User Interface Workstation 5 offers a new GTK version 2 based user interface on Linux which provides an improved look and feel and enhanced usability Easier Upgrades and VMware Tools Installation Improvements Starting with Workstation 5 on Windows hosts you can automatically install a new release over an existing Workstation release The installer automatically uninstalls the previous version before installing the new version Workstation 5 also streamlines VMware Tools installation for Linux virtual machines by allowing users to install VMware Tools without exiting the X session See Upgrading VMware Workstation on page 61 and Installing VMware Tools on page 140 Support for NX bit Support for the NX bit and XD bit improves security for guest operating systems that take advantage of the feature Workstation 5 now supports the no execute and execute disable bit for guest operating systems that can leverage it Aimed at thwarting malicious buffer overruns NX and XD allow properly written applications to designate memory space as nonexecutable so that no code can be executed from that memory space 27 VMware Workstation 5 User s Manual 28 Experimental Support for Direct3D Workstation 5 includes experimental support for Direct3D
422. r s Manual 26 New Gigabit Virtual Adapter for 64 Bit Guests New in v5 5 For Workstation virtual machines with supported 64 bit guest operating systems Workstation 5 5 emulates a new Ethernet adapter type the Intel PRO 1000 MT Server Adapter This virtual adapter type is supported only for 64 bit guests Experimental Support for Two Way Virtual SMP New in v5 5 For all supported configurations of 32 bit and 64 bit host and guest operating systems running on multiprocessor host machines Workstation provides experimental support for two way virtual Symmetric Multiprocessing SMP This enables you to assign two virtual processors to a virtual machine You can assign two processors to the virtual machine if the host machine has at least two logical processors See Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 Isochronous USB support Workstation 5 offers support for isochronous USB input devices such as Web cameras and microphones as well as output devices such as speakers Use your webcam or work with multitrack audio within your guest operating system Command Line Interface Workstation 5 offers a new command line interface enabling you to create scripts to automate certain manual steps See Command Line Reference on page 102 Enhanced Command Line Interface New in v5 5 Workstation 5 5 enhances the command line interface vmrun so you can manage snapshots of virtual machines more easily With sim
423. r s clock which can improve performance for some functions You can install VMware Tools by choosing VM gt Install VMware Tools Disconnect CD ROM Using the VM gt Removable Devices menu disconnect your CD ROM drive if you do not need to use it Disconnecting CD ROM devices reduces CPU usage Install in Text Mode When you are installing your Linux guest operating system use the text mode installer instead of the graphical installer if you have a choice This makes the installation process faster If you do use a graphical installer and if you are using a Linux host computer try to run VMware Workstation in full screen mode during the installation Full Screen Mode Run your virtual machine in full screen mode Click the Full Screen button on the VMware Workstation toolbar 453 VMware Workstation 5 User s Manual 454 Disk I O Performance Tips Memory Trimming Workstation uses a memory trimming technique to return unused virtual machine memory to the host machine for other uses While trimming usually has little impact on performance and may be needed in low memory situations the I O caused by memory trimming can sometimes interfere with disk oriented workload performance in a guest You can disable memory trimming for a guest in the virtual machine settings editor VM gt Settings gt Options gt Advanced In the Settings section of the Advanced panel select Disable memory page trimming Page Sharing VMwa
424. r use and dhepd may notice this In such cases some dhepd implementations abort if their configuration files do not include a subnet specification for the interface even if dhepd is not supposed to respond to messages that arrive through the interface The best solution to this problem is to add a line in the following format to the dhepa configuration file subnet lt net gt 0 netmask 255 255 255 0 lt net gt is the network number assigned to your host only network for example 192 168 0 This line in the configuration file informs dhepd about the host only network and tells it explicitly not to respond to any DHCP requests it sees coming from it An alternative solution is to explicitly state the set of network interfaces that you want dhcepd to listen to each time you start the program For example if your machine has one Ethernet interface et ho then each time you start dhepa list it on the command line dhcpd etho This keeps dhepd from probing for all available network interfaces If the above solutions do not work for your DHCP server program then it likely is old You can try upgrading to a more current version such as the DHCP software available from the ISC www isc org 355 VMware Workstation 5 User s Manual 356 DHCP and Dynamic Domain Name Service DDNS DHCP can be used to hand out IP addresses as well as other information such as the identity of a host running a name server and the nearest ro
425. r virtual machine Many modern operating systems have a growing need for memory so assigning a generous amount is a good thing The same holds true for the host operating system especially a Windows host The New Virtual Machine Wizard automatically selects a reasonable starting point for the virtual machine s memory but you may be able to improve performance by adjusting the settings in the virtual machine settings editor VM gt Settings gt Memory 435 VMware Workstation 5 User s Manual If you plan to run one virtual machine at a time most of the time a good starting point is to give the virtual machine half the memory available on the host Adjusting the application memory settings may also help Go to Edit gt Preferences gt Memory For additional information see Memory Usage Notes on page 443 Debugging Mode VMware Workstation can run in two modes normal mode and a mode that provides extra debugging information The debugging mode is slower than normal mode For normal use check to be sure you are not running in debugging mode Choose VM gt Settings gt Options and select Advanced In the Advanced Options section be sure there is no check in the Run with debugging information check box CD ROM Drive Polling Some operating systems including Windows NT and Windows 98 poll the CD ROM drive every second or so to see whether a disc is present This allows them to run autorun programs This pol
426. r your guest operating system and you are ready to begin the installation process Upgrading VMware Tools Now you can upgrade VMware Tools without uninstalling the previous version However it is a good idea to upgrade the virtual machine first See Procedure to Upgrade Virtual Machines on page 69 To upgrade VMware Tools follow the installation procedure for your guest operating system in the next sections www vmware com CHAPTER 5 Creating a New Virtual Machine VMware Tools for Windows Guests VMware Tools for Windows supports Windows 95 Windows 98 Windows Me Windows NT 4 0 Windows 2000 Windows XP and Windows Server 2003 guest operating systems The detailed steps for installing VMware Tools depend on the version of Windows you are running The steps that follow show how to install VMware Tools in a Windows XP guest Some steps that are automated in newer versions of Windows must be performed manually in Windows 9x and Windows NT Note If you are running VMware Workstation on a Windows host and your virtual machine has only one CD ROM drive the CD ROM drive must be configured as an IDE or SCSI CD ROM drive It cannot be configured as a generic SCSI device To add an IDE or SCSI CD ROM drive see Adding Configuring and Removing Devices in a Virtual Machine on page 182 For information about generic SCSI see Connecting to a Generic SCSI Device on page 422 Installing VMware Tools in a Windows Guest Operating Sy
427. ram again to set up host only networking Setting Up the Second Host Only Interface Windows Host Follow these steps to set up the second host only interface on a Windows host 1 Go to Edit gt Virtual Network Settings gt Host Virtual Adapters Click Add new adapter Click Apply 2 3 Choose the virtual network on which you want to use the adapter and click OK 4 5 Click OK to close the virtual network editor www vmware com CHAPTER 12 Configuring a Virtual Network Setting Up the Second Host Only Interface Linux Host iF As root su run the VMware Workstation configuration program usr bin vmware config pl Use the wizard to modify your configuration After asking about a NAT network the program asks Do you want to be able to use host only networking in your virtual machines Answer Yes The wizard reports on host only networks that you have already set up on the host or if none is present configures the first host only network The wizard asks Do you wish to configure another host only network Answer Yes Repeat this step until you have as many host only networks as you want Then answer No Complete the wizard When it is finished it restarts all services used by VMware Workstation Run ifconfig You should see at least four network interfaces etho lo vmnet1 and vmnet2 If the VMnet interfaces do not show up immediately wait for a minute then run the command again
428. rations you use often e Overcome legacy migration barriers certain legacy systems may be impossible to recreate through reinstallation Importer Requirements Importer Application Requirements The importer runs on the following Microsoft Windows operating systems Windows NT Windows 2000 Windows 2003 and Windows XP Professional Note Although the importer operates only on Windows after the migration you can transfer the virtual machine to the VMware supported host platform of your choice www vmware com CHAPTER 5 Creating a New Virtual Machine Virtual Machine and System Image Input Requirements e System images can be imported from Symantec LiveState Recovery irtual machines can be imported from Microsoft Virtual PC version 7 and later irtual machines can be imported from any version of Microsoft Virtual Server irtual machines must be powered off before you attempt the migration Vi Vi e Virtual machines from Macintosh versions of Virtual PC are not supported Vi process Suspended virtual machines cannot be migrated T he operating system on the source Virtual PC or Virtual Server virtual machine must be a Windows guest operating system but not Windows 9x supported by the intended VMware platform for example VMware Workstation 4 or 5 See the VMware Web site for a list of supported operating systems www vmware com support guestnotes doc index html Note Virtual PC and Virtual Server
429. raw disk 254 Switch virtual network 327 workspaces in Linux guest 90 Symmetric Multiprocessing see Virtual SMP System requirements 30 display 31 memory 31 PC hardware 30 T Tabs hide 172 Tape drive 422 427 Team 167 adding virtual machines 302 default directory 302 multi tier 300 name change 322 network 300 new 301 no clone template 297 overview 300 power off 310 power on 310 resume 311 snapshot 309 suspend 31 Telnet 367 Template parent of linked clone 297 Template mode linked clone 297 Text cutting copying and pasting 175 Time synchronize guest and host 150 Token Ring 331 Toolbar customizing 81 hide 172 459 Tools devices tab 151 installing VMware Tools 140 options tab 150 scripts tab 151 Shared Folders tab 152 shrink tab 152 starting VMware Tools 160 VMware Tools 476 Trend Micro Virus Buster installation issues 174 487 troubleshooting 134 Turion 24 30 Turion processor supported for 64 bit guest 37 U Undoable mode migrating 201 Uninstall host virtual adapter 343 on Linux host 58 on Windows host 53 Upgrade Linux kernel reconfiguring Worksta tion after upgrade 57 on Linux host 66 on Windows host 65 virtual machine 67 69 VMware Workstation 61 USB connecting devices 418 control of devices by host and guest 420 controller enabling and disabling 418 devices in a virtual machine 417 disconnecting devices 421 keyboard and mouse 421 ona Linux host 4
430. rd Select a Physical Disk Which local hard disk do you want this virtual machine to use Device PhysicalDrived Usage Use entire disk Use individual partitions 4 Choose the physical hard disk to use from the drop down list Select whether you want to use the entire disk or use only individual partitions on the disk Click Next Add Hardware Wizard x Select Partitions Which partitions would you like to use for this virtual disk Partitions Device PtysicabDived Partition Fie System Copacity C Pattition 0 HPFS NTFS 34GB O Patton 1 HPFS NTFS 3 468 Partition 2 HPFS NTFS 21 868 5 Ifyou selected Use individual partitions in the previous step select which partitions you want to use in the virtual machine If you selected Use entire disk his step does not appear Click Next 6 The partition on which you are installing the guest operating system should be unmapped in the host Caution Corruption is possible if you allow the virtual machine to modify a partition that is simultaneously mounted under Windows Since the virtual machine and guest operating system access a physical disk partition while the host continues to run Windows it is critical that you not allow the virtual machine to modify any partition mounted by the host or in use by another virtual machine To safeguard against this problem be sure the physical disk partition you use for the virtual machine is not in use by the host
431. re com Workstation supports virtual machines with 64 bi host machines that have one of the supported 64 Workstation 5 5 supports the following operating CHAPTER 1 Introduction and System Requirements t guest operating systems only on l bit processors systems for 64 bit guests e Experimental support for Windows Vista x64 Windows Server 2003 x64 Edition SP1 Windows XP Professional x64 Edition SP1 Red Red SUSE Li SUSE SUSE SUSE at Enterprise Linux 4 ot at Enterprise Linux 3 nux Enterprise Server 9 nux Pro 9 3 Linux Pro 9 2 Linux Pro 9 1 Solaris FreeBS 10 experimental D5 3 Ubuntu Linux 5 10 experimental Ubuntu Linux 5 04 experimental Edition For more about Workstation support for 64 bit guest operating systems see Support for 64 Bit Guest Operating Systems on page 37 Improved 64 Bit Host Support Workstation 5 includes hardware support for the following 64 bit processors AMD Opteron AMD Turion 64 AMD Athlon 64 AMD Sempron experimental and Intel EM64 Wi Edition SP1 Re SU SU SUSE Windows Server 2003 x64 Edition SP1 Red H ndows XP Professional x64 dH at Enterprise Linux 3 0 SE Linux Enterprise Server 7 8 9 SE Linux 10 Linux Pro 9 3 at Enterprise Linux 4 0 IT VT capable processors experimental Software support includes 64 bit host operating systems 25 VMware Workstation 5 Use
432. re uses a page sharing technique to allow guest memory pages with identical contents to be stored as a single copy on write page Page sharing decreases host memory usage but consumes system resources potentially including I O bandwidth You may want to avoid this overhead for guests for which host memory is plentiful and I O latency is important To disable page sharing add the following line to the virtual machine configuration vmx file sched mem pshare enable FALSE option www vmware com CHAPTER Special Purpose Configuration Options The following sections describe how to use special purpose configuration options e Locking Out Interface Features on page 457 e Restricting the User Interface on page 459 e Using Full Screen Switch Mode on page 462 e Guest ACPI S1 Sleep on page 470 In some situations you may find it useful to restrict a user s ability to reconfigure virtual machines and to simplify the user interface for inexperienced users In a classroom for example you may want to ensure that virtual machine configurations remain consistent from one class session to the next The special purpose configuration options available on Windows hosts meet these needs 455 VMware Workstation 5 User s Manual 456 Administrative lockout is a global setting for VMware Workstation itself and affects all virtual machines Restricted user interface affects only the specific virtual machines for which the setting has be
433. reach the Select I O Adapter Types step select the SCS adapter type hat matches the driver you installed in the virtual machine profile When you reach the Select a Disk step select Use a physical disk n the Device list select the physical drive Under Usage select whether to use the entire disk or individual partitions f you selected Use entire disk click Next then go to step 6 f you selected Use individual partitions the Select Physical Disk Partitions panel appears Select the partitions you want the virtual machine to use then click Next In the entry field enter a name of your choice for the physical disk Caution If you browse to place the disk file in another directory do not select an existing virtual disk file To specify a device ID for the physical disk click Advanced In the Virtual device node list select the SCSI ID that corresponds to the one used by your SCSI drive For example if your SCSI drive has SCSI ID 2 select SCSI 0 2 If you do not know the SCSI ID set on your physical SCSI drive try using SCSI 0 0 259 VMware Workstation 5 User s Manual 260 On the advanced settings screen you can also specify a disk mode This is useful in certain special purpose configurations in which you want to exclude disks from snapshots For more information on the snapshot feature see Using Snapshots on page 273 Normal disks are included in snapshots In most cases this is the setting you want Ind
434. recognize the CD ROM drive when it prompts you to insert the CD ROM to look for device drivers during the initial hardware detection In such cases you can cancel the installation of the particular device or try pointing to C windows system to search for device drivers on the hard disk Any failed device installations may be performed at a later time after the CD ROM drive is recognized After Windows has installed the virtual hardware and its drivers you can remove the failed devices corresponding to the physical hardware using the Device Manager Control Panel gt System gt Device Manager Select the device then click the Remove button If a device appears in multiple hardware profiles you can select the hardware profile or profiles from which to remove the device www vmware com CHAPTER 8 Using Disks f you want to enable the virtual machine s sound adapter to work inside the Windows 9x guest operating system finish the remaining steps in this section hen refer to Configuring Sound on page 389 Windows NT guests only After the operating system has finished booting in he virtual machine view the event log to see which physical devices have failed o start properly You can disable them from the Virtual Hardware profile using he Device Manager Control Panel gt Devices f you want to enable the virtual machine s sound adapter to work inside the Windows NT guest operating system finish the remaining steps in this sect
435. red off If you select Ask Me Workstation will prompt you to choose among these options each time you power off www vmware com CHAPTER Using Disks The following sections provide information on configuring your virtual machine s hard disk storage so it best meets your needs Configuring Hard Disk Storage in a Virtual Machine on page 210 Adding Drives to a Virtual Machine on page 219 Using VMware Virtual Disk Manager on page 230 Configuring a Dual Boot Computer for Use with a Virtual Machine on page 237 Installing an Operating System on a Physical Partition from a Virtual Machine on page 263 Legacy Virtual Disks on page 268 209 VMware Workstation 5 User s Manual 210 Configuring Hard Disk Storage in a Virtual Machine Like a physical computer a VMware Workstation virtual machine stores its operating system programs and data files on one or more hard disks Unlike a physical computer VMware Workstation gives you options for undoing changes to the virtual machine s hard disk The New Virtual Machine Wizard creates a virtual machine with one disk drive You can use the virtual machine settings editor VM gt Settings to add more disk drives to your virtual machine to remove disk drives from your virtual machine or to change certain settings for the existing disk drives This section describes the choices you can make in setting up hard disk storage for your virtual machine e Disk Types Virtual and Phys
436. reen resolution does not allow you to enlarge the Workstation console sufficiently you can manually set the guest operating system s screen resolution to 640x480 or larger Simplifying the Screen Display If you prefer you can turn off display of many of the controls visible in the VMware Workstation window Use the View menu to toggle the following controls on or off e Favorites e Toolbar e Status bar e Virtual machine tabs On a Windows host you can also hide the menu bar To do so click the title bar icon then choose Hide Controls Windows XP Professional Move J sna Minimize Hiding the menu bar on a Windows host Choosing Hide Controls hides the menu bar the toolbar the status bar and the Favorites list www vmware com CHAPTER 6 Running VMware Workstation For the simplest possible VMware Workstation window on a Windows host first choose View gt Tabs to turn off the tabs Then from the title bar icon shortcut menu choose Hide Controls SI Windows XP Professional VMware Workstation With controls hidden a virtual machine appears as a host Using the View menu and the title bar icon shortcut menu you can remove all visible controls from the VMware Workstation window 173 VMware Workstation 5 User s Manual Installing New Software Installing new software in a VMware Workstation virtual machine is just like installing it ona physical computer For example to install software in a Win
437. responds to the virtual network you want to configure Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT nt Use this page to associate individual virtual networks to specific physical and virtual network gy adapters as well as change their settings VMnetg Bridged to an automatically chosen adapter a VMnetl BD VMware Network Adapter VMnett x VMnet2 E Realtek ATLE139 Family PCI Fast Ethemet NIC Packet Scheduler Mir VMnet3 Not bridged VMnet Not bridged VMnet5i Not bridged VMnet6 Not bridged VMnet Not bridged VMnet amp EP VMware Network Adapter VMnet8 VMnetg Not bridged DOUNA H 0K cancel Ano _ 2 Choose Subnet or DHCP e Inthe Subnet dialog box you can change the subnet s IP address and the subnet mask IP Address 192 168 198 Subnet Mask 255 255 255 0 The address should specify a valid network address that is suitable for use with the subnet mask The default subnet mask is 255 255 255 0 a class C network Typically this means you should modify only the third number in the IP address for example x in 192 168 x 0 or 172 16 x 0 In general you should not change the subnet mask Certain virtual network services may not work as well with a customized subnet mask When you modify the network address or subnet mask VMware Workstation automatically updates
438. rks created by VMware Workstation VMware Tools Asuite of utilities and drivers that enhances the performance and functionality of your guest operating system Key features of VMware Tools include some or all of the following depending on your guest operating system an SVGA driver a mouse driver the V as shared folders drag and d synchronization with the host VMware Tools scripts and connecting and disconnecting devices while You Are Here icon As ware Tools control panel and support for such features rop in Windows guests shrinking virtual disks time the virtual machine is running pecial icon appearing in the snapshot manager that indicates the current status of the active virtual machine This can be important when deciding whether to revert to or go to a snapshot See also Snapshot manager Revert to snapshot and Go to Snapshot www vmware com Index File extensions bmp 183 cfg 110 dsk 109 log 108 Avram 108 png 183 REDO 109 std 110 SV2i file importing 125 tar 144 mc file importing 125 vmdk 109 191 195 198 213 vmem 109 vmsd 109 msn 110 vmss 110 vmtm 110 vmx 110 454 locating for clone 303 vmxf 110 wav 389 A ACPI 470 Adapter enabling disabling adding and removing host virtual adapter 343 host virtual 328 in promiscuous mode on a Linux host 364 virtual Ethernet 336 Address assigning IP 349 assigning MAC manually 353 I
439. rkstation 5 User s Manual 78 Displaying the Console View The console view for an active virtual machine is like the monitor screen of a hardware PC E suse91 VMware Workstation Fie Edt Viw YM Team Windows Help zupe Sap os Favorites Te 83 2T Client Server 83 3T Client Server DB E linux Ms B Mandrake Linux RHEL3 clean install E Root Console Windows host console window mE ACE i File Edit View VM Team Tabs Help wf gt a a m z Power Off Suspend PowerOn Reset Snapshot Revert Snapshot Manager Full Screen Quick Switch Summary Console Favorites x A Home x amp xppro x i xppro2 x 5 aTier x sip Client Server Team x jy RHEL3a x gt GTeams Tier 8 Client Server Team gt Linux E Mandrake Linux GyRHEL3a GBSUSE Linux gt Windows EE RET Bo Oe 62 4 rean e E Longhom experimental Ariat NetWare 5 x Solaris 9 experimental 10 Westem COM L Linux host console window ose When a virtual machine is active the name of the virtual machine or the name of the team it is on if any is always displayed in a tab at the top of the console To switch from the active virtual machine or team click the tab of another virtual machine or team You can use the console tabs in the windowed view and also in the quick switch view experimental RedHa 4 gt x Tabs make it easy to switch among active
440. rmation and metadata about snapshots 109 VMware Workstation 5 User s Manual 110 Extension File Name Description vmsn lt vmname gt Snapshot vmsn This is the snapshot state file which stores the running state of a virtual machine at the time you take that snapshot lt vmname gt Snapshot lt gt vmsn This is the file which stores the state of a snapshot vmss vmtm lt vmname gt vmss lt vmname gt vmtm This is the suspended state file which stores the state of a suspended virtual machine Some earlier VMware products used the extension std for suspended state files This is the configuration file containing team data lt vmname gt vmx This is the primary configuration file which stores settings chosen in the New Virtual Machine Wizard or virtual machine settings editor If you created the virtual machine under an earlier version of VMware Workstation on a Linux host this file may have a c g extension vmxf lt vmname gt vmxf This is a supplemental configuration file for virtual machines that are in a team Note that the vmxf file remains if a virtual machine is removed from the team There can be other files in the directory some of which are present only while a virtual machine is running www vmware com CHAPTER 4 Learning VMware Workstation Basics Where to Go Next e Creating a New Virtual Machine on page
441. rnet adapter in virtual machine 1 use the networking settings needed for a connection to the external network If the virtual machine gets its IP address from a DHCP server on the external network the default settings should work For the second Ethernet adapter in virtual machine 1 manually assign an IP address in the range you are using with VMnet2 n virtual machine 2 assign an IP address in the range you are using with VMnet2 n virtual machine 3 network adapters are connected to VMnet2 and VMnet3 Assign each adapter an IP address in the range you are using with the virtual network to which it is connected n virtual machine 4 assign an IP address in the range you are using with VMnet3 Install the necessary application software in each virtual machine 335 VMware Workstation 5 User s Manual 336 Changing the Networking Configuration Using the virtual machine settings editor VM gt Settings you can add virtual Ethernet adapters to your virtual machine and change the configuration of existing adapters This section contains the following topics e Adding and Modifying Virtual Network Adapters on page 336 e Configuring Bridged Networking Options on a Windows Host on page 338 e Enabling Disabling Adding and Removing Host Virtual Adapters on page 343 Adding and Modifying Virtual Network Adapters Virtual Machine Settings Hardware Options Device status Device Memory Hard Disk IDE 0 0
442. roducts You can package complex sophisticated applications complete with a full working environment in a virtual machine that is playable by anyone who has VMware Player You can also use VMware Player to access the growing library of virtual machines available from the VMware Technology Network VMTN Web site at www vmware com vmtn vm This library includes virtual machines from various software vendors as well as virtual machines that are preconfigured with popular open source software See Sharing Virtual Machines with VMware Player on page 205 Improved Performance for Virtual Machines Running Concurrently Workstation 5 includes significant improvements in memory utilization when virtual machines are used concurrently This allows you to efficiently run multiple virtual machines with much less total memory www vmware com CHAPTER 1 Introduction and System Requirements Improved Networking Performance Workstation 5 offers optional enhanced networking performance by leveraging VMware s custom network driver Once you install the updated VMware Tools the necessary network drivers integrate seamlessly to offer significantly improved network performance Improved Suspend Resume and Snapshot Operations Workstation 5 performs significantly faster suspend resume and snapshot operations enabling you to spend more time testing and less time waiting for power operations to execute New Host Operating System Support See also I
443. rogresses See Virtual Machine Settings for Snapshots on page 287 for configuring automatic snapshots at power off Disabling Snapshots for Better Performance VMware Workstation operates more efficiently with snapshots disabled If you do not need to use snapshot functionality you should disable it for better performance See Virtual Machine Settings for Snapshots on page 287 www vmware com CHAPTER 9 Preserving the State of a Virtual Machine What Is Captured by a Snapshot A snapshot captures the entire state of the virtual machine at the time you take the snapshot This includes e Memory state The contents of the virtual machine s memory e Settings state The virtual machine settings e Disk state The state of all the virtual machine s virtual disks Snapshots operate on individual virtual machines In a team of virtual machines taking a snapshot preserves only the active virtual machine s state See The Active Virtual Machine on page 318 When you revert to a snapshot you return the virtual machine s memory settings and virtual disks to the state they were in when you took the snapshot If you want the virtual machine to be suspended powered on or powered off when you launch it be sure it is in the desired state when you take the snapshot Note The state of a physical disk or independent disk is not preserved when you take a snapshot Snapshots and Other Activity in the Virtual Machine When you take
444. rticular guest operating systems running inside a virtual machine e Windows 95 and Windows 98 Guest Operating System Performance Tips on page 449 e Windows 2000 Windows XP and Windows Server 2003 Guest Operating System Performance Tips on page 451 e Windows NT Disk Performance on Multiprocessor Hosts on page 452 e Linux Guest Operating System Performance Tips on page 452 See Defragmentation of Disk Drives on page 432 for information about keeping disk drives efficient for all guest operating systems Windows 95 and Windows 98 Guest Operating System Performance Tips This section offers advice for configuring a Windows 95 or Windows 98 guest operating system for better performance inside a VMware Workstation virtual machine Note This document pertains to the guest operating system that is running inside a VMware Workstation virtual machine It does not describe actions that should be taken on the host Guest Operating System Selection Make certain you have selected the correct guest operating system in the virtual machine settings editor VM gt Settings gt Options VMware Tools Make certain VMware Tools is installed VMware Tools provides an optimized SVGA driver and sets up the VMware Tools service to run automatically when the system starts Among other things the VMware Tools service allows you to synchronize the virtual machine s clock with the host computer s clock which can improve performance for some functions Y
445. rtual machine If you are experiencing slow disk performance in the virtual machine or if you want to improve the speed of suspend and resume operations check to be sure the host disk that holds the virtual machine s working directory and virtual disk files is not badly fragmented If it is fragrnented you can improve performance by running a defragmentation utility to reduce fragmentation on that host disk www vmware com CHAPTER 15 Performance Tuning Virtual Drives Use the Workstation application to defragment virtual disks See Defragmenting Virtual Disks on page 215 Guest Operating System Drives It is strongly recommended that you defragment using a guest operating system mechanism before taking the first snapshot or linked clone e Workstation makes all its changes to the redo log not to the original disk when you run a defragmenting program on the guest after a snapshot You lose the ability to defragment inside the original disk forever e Every sector that moves is copied to the redo log making the virtual machine redo log extremely large when the disk is heavily fragmented and you run defragmentation after a snapshot Performance Impact of Defragmenting Snapshots and Linked Clones There may be a performance impact when you defragment a linked clone or a virtual machine with a snapshot Exact performance degradation depends on The fragmentation of the parent virtual machine disk when you created the snapshot
446. rtual Machine Select whether to create an IDE or SCSI disk New Virtual Machine Wizard Select a Disk Type What kind of disk do you want to create Virtual Disk Type IDE Recommended Oscsi The wizard recommends the best choice based on the guest operating system you selected All Linux distributions you can select in the wizard use SCSI virtual disks by default as do Windows NT Windows 2000 and Windows Vista All Windows operating systems except Windows NT Windows 2000 and Windows Vista use IDE virtual disks by default NetWare FreeBSD MS DOS and other guests default to IDE virtual disks Specify the capacity of the virtual disk New Virtual Machine Wizard Specify Disk Capacity How large do you want this disk to be Disk capacity This virtual disk can never be larger than the maximum capacity that you set here Disk size GB m C Allocate all disk space now By allocating the full capacity of the virtual disk you enhance performance of your vitual machine However the disk wil take longer to create and there must be enough space on the host s physical If you do not allocate disk space now your virtual disk files wil start small then yecome larger as you add applications files and data to your virtual machine Split disk into 2 GB files Enter the size of the virtual disk that you wish to create You can set a size between 0 1GB and 950 GB for a SCSI virtual disk The option Allocate all di
447. rtual machines under both VMware Workstation 5 and your previous version of VMware Workstation Workstation 2 to 5 Upgrading Workstation 2 virtual machines requires that you first upgrade to Workstation 3 or 4 Direct upgrades from a Workstation 2 virtual machine are not supported in Workstation 5 63 VMware Workstation 5 User s Manual 64 Workstation 3 to 5 Virtual machines created under Workstation 3 must be upgraded before they can run under Workstation 5 Once they are upgraded they cannot be run under Workstation 3 Workstation 4 to 5 Virtual machines created under Workstation 4 or updated to Workstation 4 offer two options e You may update the virtual machine for full compatibility with Workstation 5 However a virtual machine upgraded to Workstation 5 can no longer be used under Workstation 4 e You may choose not to update the virtual machine In that case you can run the virtual machine under both Workstation 4 and Workstation 5 but you do not enable new features provided by Workstation 5 For example you cannot take multiple snapshots Removing Version 3 or 4 to Install Version 5 There is a key precaution you should take when you remove VMware Workstation 3 or 4 or an earlier version of VMware Workstation 5 to install VMware Workstation 5 e Leave the existing license in place VMware Workstation installation procedures for your host may require that you run an uninstaller to re
448. rve a disk with your operating system and applications while always keeping the changes to a disk with your documents For the procedure see Changing Disk Mode to Exclude Virtual Disks from Snapshots on page 279 Taking a Snapshot Use the Snapshot menu on the Workstation toolbar to take a snapshot 1 Choose VM gt Snapshot gt Take Snapshot 2 Type a name for your snapshot Every snapshot must have a unique name If you type the name of an existing snapshot a warning appears and you must enter a different name 3 If you wish you may type a description for your snapshot Descriptions are useful to identify differences between similarly named snapshots Descriptions appear in the snapshot manager 4 Click OK Snapshot Actions as Background Activity Taking a snapshot is not instantaneous When you take a snapshot you can continue working while VMware Workstation preserves the snapshot in the background You can enable background snapshots in the Priority tab of the Preferences window See Snapshots on page 92 Enabling background snapshots for a host with slow hard disks may affect performance If you experience significant performance problems when taking or restoring snapshots turn off this option If you take another snapshot or revert to one before Workstation completes a pending og box appears When this occurs you must wait snapshot operation a progress dia for the pending snapshot operation to finish before the next
449. s Separator E Power Off Reset DI Suspend a Buttons listed under Current toolbar buttons are displayed in the toolbar in the order shown in the Customize Toolbars window 2 To add or remove a button from the toolbar select the button and click Add or Remove Add a separator to display a vertical line between the buttons To change the order of the buttons select any button under Current toolbar buttons and click Move Up or Move Down to rearrange the buttons Note You can also change the order of the currently displayed buttons without opening the Customize Toolbar window Hold down the Shift key while you drag and drop a button to a different location in the toolbar To restore the default setup with all buttons displayed click Reset 3 Click Close 82 www ymware com CHAPTER 4 Learning VMware Workstation Basics The Favorites List This section describes the following topics Overview of the Favorites List on page 83 Adding an Item to the Favorites List on page 84 Adding the Active Virtual Machine to the Favorites List on page 84 Removing an Item from the Favorites List on page 84 Removing the Active Virtual Machine from the Favorites List on page 84 Changing the Name of a Favorite List Item on page 85 Organizing Favorites into Folders on page 85 Hiding and Displaying the Favorites List on page 85 Overview of the Favorites List The Favorites list gives you a convenient way to
450. s XP or Windows Server 2003 Select Virtual Machine from the list of profiles when prompted Windows 98 auto detects the virtual machine s devices and installs the device drivers When Windows detects the video card driver select Search for the best driver When prompted to reboot click No The AMD PCNET driver is installed followed by the IDE controller drivers When prompted to reboot click Yes Select the Virtual Machine hardware profile After Windows 98 has completed booting start the Add New Hardware wizard from the Control Panel Click Next then Next again Select No the device isn t in the list Click Yes then click Next www vmware com 20 21 22 23 24 25 26 27 28 29 CHAPTER 8 Using Disks After all devices have been detected click the Details button to list the detected non Plug and Play devices ick Finish then reboot the virtual machine when prompted Select the VMware Workstation configuration profile Notice that an unknown monitor is detected and installed nstall VMware Tools as outlined in Installing a Guest Operating System and VMware Tools on page 137 Open the Device Manager It should show that you have e Standard PCI Graphics Adapter e VMware SVGA Display Adapter Shut down the Windows 98 virtual machine and your host operating system Boot natively into Windows 98 then start the Device Manager Select the VMware SVGA device if listed then clic
451. s are running entirely in RAM they have the best possible performance Allow some virtual machine memory to be swapped Allow the host operating system to swap a moderate amount of virtual machine memory to disk if necessary This setting allows you to increase the number or memory size of virtual machines that can run on the host computer at a given time It may also result in reduced performance if virtual machine memory must be shifted between RAM and disk Allow most virtual machine memory to be swapped Allow the host operating system to swap as much virtual machine memory to disk as it wants This setting allows you to run even more virtual machines with even more memory than the intermediate setting does In this case too performance may be lower if virtual machine memory must be shifted between RAM and disk www vmware com CHAPTER 15 Performance Tuning Using More Than 1GB of Memory on a Linux Host By default Linux kernels in want to use more memory e Upgrade to a 2 4 x seri he 2 2 x series support 1GB of physical memory If you in Linux you can take one of several approaches es kernel that allows for more physical memory e Recompile your kernel as a 2GB kernel using the CONFIG_2GB option e Enable the CONFIG_B GMEM option to map more physical memory This approach requires special steps described in detail in the Workarounds section below to work with V ware products The CONFIG_2
452. s are true e The virtual machine or team was left open e The virtual machine or team was powered on and off or powered on and suspended Use the Check for software updates drop down menu to determine how often VMware Workstation checks to see if new versions of the product are available To have VMware Workstation check for updates automatically 1 Choose Edit gt Preferences gt Workspace 2 On the Check for software Updates drop down menu set the interval The choices are Never Daily Weekly or Monthly The Software updates section of the Workspace tab shows the time and result of the most recent automatic check for updates and the time of the next scheduled check To check manually for product updates at any time click Check now Linux hosts only Note Checking for product updates works only if the host computer is connected to the Internet 88 www vmware com CHAPTER 4 Learning VMware Workstation Basics Input Preferences Workspace Input Hot Kays Display Memory Prionty Lockout Keyboard and Mouse Grab keyboard and mouse input on mouse click C Grab keyboard and mouse input on key press Cursor These options are effective only when VMware Tools is running in the virtual machine Ungrab when cursor Jeaves window Hide cursor on ungtab Z Grab when cursor enters window Copy and paste Enable copy and paste to and from virtual machine The Input tab lets you adjust the way tha
453. s for 141 Windows 95 sound driver 389 SVGA driver in a physical disk config uration 252 Windows 98 sound driver 389 SVGA driver in a raw disk configura tion 254 Windows NT SCSI driver for guest 423 sound driver 389 Windows Server 2003 SCSI driver for guest 258 422 489 490 Windows XP installing guest operating system 138 SCSI driver for guest 258 422 Wizard add new hardware 182 clone virtual machine 292 new team 301 new virtual machine 115 213 473 Workspaces switching in Linux guest 90 X X server and keyboard mapping 409 Xeon 30 XFree86 and keyboard mapping 409 Z Zip drives on a parallel port 396 www ymware com
454. s for just the specific virtual machine where you make the changes Pay particular attention to the grabbed HIGH ungrabbed NORMAL and grabbed NORMAL ungrabbed LOW settings The grabbed HIGH ungrabbed NORMAL setting is useful if you have many background processes or applications and you do not care if they run with fairly low relative priority while VMware Workstation is in the foreground In return you get a very noticeable performance boost using a VMware Workstation virtual machine while another virtual machine is running or while some other processor intensive task a compile for example is running in the background The reverse is true of the grabbed NORMAL ungrabbed LOW setting If your host machine feels too sluggish when a virtual machine is running in the background you can direct the virtual machine to drop its priority when it does not have control of the mouse and keyboard As with the high setting this is a heavy handed change of priority so the virtual machine and any background applications run much more slowly Windows Host Disk Caching On Windows Host the Disk Properties Policies page associated with each hard drive provides a checkbox concerning enabling write caching on the disk and in some cases enabling advanced performance on the disk Checking one or both of these boxes can improve host disk performance in general and checking them for the host disks containing VMware virtual disk files can im
455. s line the configuration file no longer starts the 1p module To ensure that the proper modules for the parallel port are loaded at boot time add this line to the etc modules conf or etc conf modules file alias parport_lowlevel parport_pc Parallel Ports and Linux 2 4 x Kernels Be sure that PC Style Hardware CONFIG_PARPORT_PC is loaded as a module as mentioned at the beginning of Using Parallel Ports on page 392 If you are using a 24x kernel the modules that provide parallel port functionality are parport parport_pcand ppdev To see if these modules are installed and running on your system run the Lsmod command as the root user These three modules should be included in the listing of running modules You can also look at the proc modules file for the same list To load the proper modules run this command insmod k lt modulename gt If none of the listed parallel port modules is running use this command insmod k parport_pc This command inserts the three modules needed for a parallel port If you continue to see problems it is possible that the 1p module is running If it is the virtual machine cannot use the parallel port correctly To remove the 1p module run this command as the root user rmmod lp You should also ensure that the line referring to the 1p module in the etc modules conf or etc conf modules file is removed or commented out by inserting a hash character at the beginning of the line The name o
456. s virtual machine click Next Virtual Machine Importer creates a VMware virtual machine from the source virtual machine or system image I YMware Virtual Machine Importer aau Importing the Virtual Machine Please wait while the Virtual Machine Importer prepares the virtual machine for VMware Workstation B Ne Cancel A progress bar appears To stop the migration click Cancel The import process can often take more than a minute per gigabyte of disk space of the migrated virtual machine When the migration is complete the wizard displays a completion panel VMware Virtual Machine Importer Virtual Machine Import is Complete Your virtual machine has been successfully imported for use with VMware Workstation When you start the new virtual machine For the lelay appropriate drivers are installed To close this wizard click Finish 8 Click Finish 132 www vmware com CHAPTER 5 Creating a New Virtual Machine If the migration is not successful the wizard displays a panel like the following To see the log file for the unsuccessful migration click Show the logfile YMware Virtual Machine Importer Virtual Machine Import Is Unsuccessful We re sorty but we are unable to import your vitual machine or image for use with VMware Workstation To import a virtual machine running Windows Server 2003 the VMware Virtual Machine Importer must be running under Windows XP or Windows S
457. scanners CD ROM DVD ROM tape drives and other SCSI devices e LSI Logic LSI53C10xx Ultra320 SCSI I O controller e Mylex BusLogic BT 958 compatible host bus adapter requires add on driver from VMware for Windows XP and Windows Server 2003 Floppy Drives e Upto two 1 44MB floppy devices e Physical drives or floppy image files Serial COM Ports e Up to four serial COM ports e Output to serial ports Windows or Linux files or named pipes Parallel LPT Ports e Upto three bidirectional parallel LPT ports e Output to parallel ports or host operating system files USB ports e Two port USB 1 1 UHCI controller e Supports most devices including USB printers scanners PDAs hard disk drives memory card readers and digital cameras as well as streaming devices such as webcams speakers and microphones Keyboard e 104 key Windows 95 98 enhanced 35 VMware Workstation 5 User s Manual 36 Mouse and Drawing Tablets e PS 2 mouse e Serial tablets supported Ethernet Card e Upto three virtual Ethernet cards e AMD PCnet PCl Il compatible e For 64 bit guests Intel Pro 1000 MT Server Adapter compatible Sound e Sound output and input e Emulates Creative Labs Sound Blaster AudioPCI MIDI input game controllers and joysticks are not supported except for USB devices Virtual Networking e Support for nine or more virtual Ethernet switches depending on the host operating system Three switches are configur
458. se Space without releasing Ctrl and Alt then press the third key of the key combination you want to send to the guest Using this dialog box you can also construct your own custom hot key combination Display Preferences Workspace Input Hot Keys Display Memory Priority Lockout Autofit C Autofit window When the virtual machine display settings change resize the application window to match C Autofit guest When the application window is resized change the virtual machine display settings to match Full Screen Oesize host Change the host display settings to match the virtual machine OResize quest Resize the virtual machine screen to match the current host resolution Odon t resize Don t modify the display settings of the host or of the achine The Display tab lets you adjust the manner in which the console and the host display accommodate a different guest operating system display resolution Autofit Use Autofit preferences to control how the console window behaves when Autofit is active e Select Autofit window to have Workstation change the console window size to match the guest operating system screen resolution This is the same as choosing View gt Autofit Window e Select Autofit guest to have Workstation change the guest operating system display resolution to match the console window size This is the same as choosing View gt Autofit Guest Note Selecting Autofit guest al
459. se to give the user limited snapshot control If you set up a snapshot for the restricted virtual machine and set the power off option to Ask me the user sees the standard dialog box when shutting down a virtual machine and has the opportunity to choose Just power off Take snapshot or Revert to snapshot Automatically Returning to a Snapshot with a Restricted User Interface You can combine a restricted user interface with a snapshot to ensure that users virtual machines always start in the same state Typically users running a virtual machine with a restricted user interface can power it on and off only and the virtual machine boots when powered on When the virtual machine has a snapshot set and is configured to return to that snapshot when powered off the user can only start and power off the virtual machine The virtual machine always starts from the snapshot Since you can restrict the user interface only on Windows hosts this combination works only with virtual machines running on Windows hosts To set up a virtual machine with restricted user interface and a snapshot as described above take the following steps 1 Power on the virtual machine and be sure it is in the state you want then take the snapshot 2 Configure the virtual machine to return to the snapshot any time it is powered off To do so choose VM gt Settings gt Options gt Snapshots and select After powering off and Revert to snapshot 3 With the
460. ses for the device to allow the device to work correctly e Z is the SCSI bus the device uses in the virtual machine The virtual machine has a SCSI adapter and generic SCSI device but Workstation does not recognize the device when the virtual machine is powered on In this case you need to look for a line in the configuration file that looks like scsiZ Y fileName lt deviceName gt Change the line to scsiZ Y fileName scsiX Y 425 VMware Workstation 5 User s Manual 426 Define X Y and Z as follows e X is the SCSI bus the device uses on the host system e Y is the target ID the device uses in the virtual machine and on the host Use the same target ID in the virtual machine that the host already uses for the device to allow the device to work correctly e Z is the SCSI bus the device uses in the virtual machine For example if the problematic device is a CD ROM drive the entry in the configuration file might be scsi0 4 fileName CdRom0 If the device on the host is located on bus 2 with target ID 4 you should change this line to scsi0 4 fileName scsi2 4 The target ID the device uses in the virtual machine must be the same as the target ID the device uses on the host system Note The SCSI bus is assigned a number by the host operating system after all IDE buses have been assigned numbers For example if you have 2 IDE buses they are numbered 0 and 1 The first SCSI bus is assi
461. sets up a private network which must be a TCP IP network The virtual machines configured for NAT are connected to that network through a virtual switch The host computer is also connected to the private network used for NAT via a host virtual adapter Each virtual machine and the host must be assigned addresses on the private network This is typically done using the DHCP server that comes with VMware Workstation Note that this server does not service virtual or physical machines residing on bridged networks Addresses can also be assigned statically from a pool of addresses that are not assigned by the DHCP server When host only networking is enabled at the time VMware Workstation is installed the network number to use for the virtual network is automatically selected as an unused private IP network number To find out what network is used on a Windows host choose Edit gt Virtual Network Settings and check the subnet number associated with the virtual network On a Linux host run ifconfig in a terminal A NAT configuration also uses an unused private network automatically selected when you install VMware Workstation To find out what network is used on a Windows host choose Edit gt Virtual Network Settings and check the subnet number associated with the virtual network On a Linux host run ifconfig in a terminal Using DHCP to assign IP addresses is simpler and more automatic than statically assigning them Most Windows operat
462. settings editor VM gt Settings and click Add The Add Hardware Wizard guides you through the steps to create your virtual disk Add Hardware Wizard x Hardware T What type of hardware do you want to install Hardware types Explanation Hard Disk Add a hard disk Qs DVD CD ROM Drive BFloppy Drive WBE themet Adapter Serial Port Parallel Port Q Generic SCSI Device Click Hard Disk then click Next Select Create a new virtual disk then click Next Choose whether you want the virtual disk to be an IDE disk or a SCSI disk Set the capacity for the new virtual disk If you wish select Allocate all disk space now Allocating all the space at the time you create the virtual disk gives somewhat better performance but it requires as much disk space as the size you specify for the virtual disk If you do not select this option the virtual disk s files start small and grow as needed but they can never grow larger than the size you set here You can set a size between 0 1GB and 950GB for a virtual disk You may also specify whether you want the virtual disk created as one large file or split into a set of 2GB files You should split your virtual disk if it is stored on a file system that does not support files larger than 2GB Accept the default filename and location for the virtual disk file or change it if you want to use a different name or location To find a different folder click Browse If
463. sk space now gives somewhat better performance for your virtual machine If you do not select Allocate all disk space now the virtual disk s files start small and grow as needed but they can never grow larger than the size you set here Note Allocate all disk space now is a time consuming operation that cannot be cancelled and requires as much physical disk space as you specify for the virtual disk 123 VMware Workstation 5 User s Manual 124 17 Specify the location of the virtual disk s files 18 Select the option Split disk into 2GB files if your virtual disk is stored on a file system that does not support files larger than 2GB New Virtual Machine Wizard Specify Disk File Where would you like to store information about this disk Disk fle One 4 068 disk fle will be created using the file name provided here Browse Click Finish The wizard sets up the files needed for your virtual machine www vmware com CHAPTER 5 Creating a New Virtual Machine Importing Virtual Machines and System Images from Other Formats To accompany Workstation release version 5 0 VMware introduced the VMware Virtual Machine Importer a separate downloadable application for Windows hosts that creates a new VMware virtual machine from a Microsoft Virtual PC or Virtual Server virtual machine In Workstation release version 5 5 the importer is incorporated into the Workstation program for Wind
464. snapshot or resume operation begins Note If you select a snapshot in the snapshot manager before that snapshot is complete Workstation displays an error message The screen shot of the snapshot does not yet exist This message does not indicate a permanent problem When the snapshot is complete a screen shot for the snapshot becomes visible in the snapshot manager and no warning appears when you select that snapshot www vmware com CHAPTER 9 Preserving the State of a Virtual Machine When Can I Take a Snapshot You can take a snapshot while a virtual machine is powered on powered off or suspended If you are suspending a virtual machine wait until the suspend operation has finished before taking a snapshot For legacy virtual machines and multiple disks in different modes the following exceptions apply Snapshots and legacy virtual machines you must upgrade a legacy virtual machine to Workstation 5 before taking a snapshot For information on upgrading the virtual machine see Upgrading VMware Workstation on page 61 For more information about using Workstation 5 with virtual machines and snapshots created under Workstation versions 3 and 4 see Snapshots and Legacy Virtual Machines on page 288 Snapshots and multiple disks in different modes You must power off the virtual machine before taking a snapshot if the virtual machine has multiple disks in different disk modes For example if you have a special
465. so activates Autofit window www vmware com CHAPTER 4 Learning VMware Workstation Basics Full Screen Use Full Screen preferences to configure how the host and guest display settings interact when you enter full screen mode on the host e Select Resize host to change the host display settings to match the display settings of the guest while the guest is in full screen mode e Select Resize guest to change the guest s display settings to match the host display settings while the guest is in full screen mode e Select Don t resize to have both host and guest retain their own display settings while the guest is in full screen mode Memory Workspace Input Hot Keys Display Memory Priority Lockout Reserved memory How much host RAM should the system be able to reserve for all running virtual machines J 22 me 16 e32 Additional memory How should the system allocate memory for vitual machines O Fi all virtual machine memory into reserved host RAM Allow some virtual machine memory to be swapped O Allow most vitual machine memory to be swapped Swapping vittual machine memory allows more virtual machines to but can degrade system performance i the vitual machines use their memory intensively The Memory tab lets you adjust the amount of physical RAM that can be used by all running virtual machines It also lets you adjust how much virtual machine memory may be swapped to disk allowing you to run
466. so reports its process ID and window handle www vmware com CHAPTER 16 Special Purpose Configuration Options Listing All the Virtual Machines Currently Powered On vmware fullscreen listvms This command lists all the virtual machines that are currently powered on The list is added to the vmware fullscreen log file The vmware fullscreen Log File The vmware fullscreen program writes to a log file This log file records errors reported by vmware fullscreen itself as it starts stops and passes other commands to VMware Workstation It is separate from the vmware log file which stores information on the running virtual machines The name of the vmware fullscreen log file is vmware lt username gt lt pid gt 1log By default the vmware fullscreen log file is in the temp directory for the user logged on to the host computer This location may be specified in the TEMP environment variable by default the location is C Documents and Settings lt username gt Local Settings Temp The administrator can specify a different location for this log file by adding the following line to the VMware Workstation global configuration file config ini fullScreenSwitch log filename lt path gt It is best to use a full path If you use a relative path the location is relative to the directory that is active when the vmware fullscreen command is issued for the first time after the host computer reboots 469 VMware Works
467. specified hot key the screen display switches to that of the specified virtual machine You may also specify a hot key for switching directly to the host operating system If any particular virtual machine is not running pressing the hot key for that virtual machine has no effect You define the hot key used to switch to a virtual machine by adding a line to the target virtual machine s configuration vmx file The value of this option defines the hot key It is specified as lt key gt lt modifier gt There is no default For example to use Ctrl Shift F1 to switch to a particular virtual machine add the following line to that virtual machine s vmx file or modify its value if the option is already listed FullScreenSwitch directKey 0x70 0x6 You define the hot key used to switch to the host operating system by adding a line to the global configuration file config ini The value of this option defines the hot key It is specified as lt key gt lt modifier gt There is no default For example to use Ctrl Shift F9 to switch to the host operating system add the following line to the config ini file or modify its value if the option is already listed FullScreenSwitch hostDirectKey 0x78 0x6 465 VMware Workstation 5 User s Manual Other Entries in the Global Configuration File The following entries in the global configuration file config ini are optional They enable you to control certain functions of
468. ss Enter to accept the default value Note Be sure to respond yes when the installer offers to run the configuration program www vmware com 8 CHAPTER 5 Creating a New Virtual Machine Launch the VMware Tools background application vmware toolbox amp Note Some guest operating systems require a reboot for full functionality Installing VMware Tools from the Command Line with the Tar Installer The first steps are performed on the host within Workstation menus 1 2 Power on the virtual machine After the guest operating system has started prepare your virtual machine to install VMware Tools Choose VM gt Install VMware Tools The remaining steps take place inside the virtual machine 3 As root su mount the VMware Tools virtual CD ROM image change to a working directory for example tmp uncompress the installer then unmount the CD ROM image Note Some Linux distributions automatically mount CD ROMs If your distribution uses automounting do not use the mount and umount commands below You still must untar the VMware Tools installer to tmp Some Linux distributions use different device names or organize the dev directory differently If your CD ROM drive is not dev cdrom or if the mount point for a CD ROM is not mnt cdrom you must modify the following commands to reflect the conventions used by your distribution mount dev cdrom mnt cdrom cd tmp Note If you have a previous i
469. ssor on a host with one or more logical processors e Two virtual processors two way virtual symmetric multiprocessing or Virtual SMP on a host with at least two logical processors Note The following a e Asingle processo e Asingle processo e Amultiprocessor e all considered r host with hyper host with a dua host with two CP hyperthreading enabled See Using Two Way Vir Chip Set tual Symmetric e Intel 440BX based motherboard NS338 SIO e 82093AA IOAPIC BIOS o have two log threading enab core CPU Us neither of w ultiprocessing e PhoenixBlOS 4 0 Release 6 with VESA BIOS Memory e Up to 3 6GB depending on host memory ical processors ed hich are dual core or have Experimental on page 429 e Maximum of 4GB total available for all virtual machines Graphics e VGA and SVGA su IDE Drives pport e Up to four devices disks CD ROM or DVD ROM DVD drives can be used to read data DVD ROM discs DVD video is not supported e Hard disks can be virtual disks or physical disks www vmware com CHAPTER 1 Introduction and System Requirements e IDE virtual disks up to 950GB e CD ROM can be a physical device or an ISO image file SCSI Devices e Upto seven devices e SCSI virtual disks up to 950GB e Hard disks can be virtual disks or physical disks e Generic SCSI support allows devices to be used without need for drivers in the host operating system Works with
470. station 5 User s Manual 372 Custom NAT and DHCP Configuration on a Windows Host If you are an advanced user on a Windows host computer you may wish to make custom configuration settings by editing the NAT and DHCP configuration files If your host operating system is installed on the C drive the configuration files for NAT and DHCP are in the following locations e NAT Cc Documents and Settings All Users Application Data VMware vmnetnat conf e DHCP C Documents and Settings All Users Application Data VMware vmnetdhcp conf Note In VMware Workstation 5 you can change many key NAT and DCHP settings using the virtual network editor Edit gt Virtual Network Settings However if you have made manual changes to the configuration files some or all of those changes may be lost when you use the virtual network editor If you have made manual changes you should make backup copies of the files before changing any settings in the virtual network editor After making changes in the virtual network editor you can copy your manual changes back into the appropriate configuration files Specifying Connections from Ports below 1024 When a client machine makes a TCP or UDP connection to a server the connection comes from a particular port on the client the source port and connects to a particular port on the server the destination port For security reasons some servers accept connections only from source ports below 1024 You may see this
471. stem 1 Power on the virtual machine 2 When the guest operating system starts select VM gt Install VMware Tools The remaining steps take place inside the virtual machine Note You must log on to a Windows NT Windows 2000 Windows XP Windows Server 2003 or Windows Vista guest operating system as an administrator in order to install VMware Tools Any user can install VMware Tools in a Windows 95 Windows 98 or Windows Me guest operating system 3 If you have autorun enabled in your guest operating system the default setting for Windows operating systems a dialog box appears after a few seconds It asks if you want to install VMware Tools Click Yes to launch the InstallShield wizard If autorun is not enabled the dialog box does not appear automatically If it doesn t appear run the VMware Tools installer Click Start gt Run and enter D setup setup exe where D is your first virtual CD ROM drive 4 Follow the on screen instructions e On Windows Server 2003 Windows Me Windows 98 SE and Windows 98 guests the SVGA driver is installed automatically and the guest operating system uses it after it reboots e With Windows 2000 and Windows XP guests you do not have to reboot to use the new driver 141 VMware Workstation 5 User s Manual 142 VMware Tools for Linux Guests On a Linux guest you can install VMware Tools within X or from the command line Installing VMware Tools within X on page 142 Installing
472. supported up to 950GB capacity e Atleast 1GB free disk space recommended for each guest operating system and the application software used with it if you use a default setup the actual disk space needs are approximately the same as those for installing and running the guest operating system and applications on a physical computer For Installation 80MB Linux or 250MB Windows free disk space required for basic installation You can delete the installer afterwards to reclaim disk space Optical CD ROM DVD ROM Drive e IDE and SCSI optical drives supported e CD ROM and DVD ROM drives supported e ISO disk image files supported Local Area Networking Optional e Any Ethernet controller supported by the host operating system e Non Ethernet networks supported using built in network address translation NAT or using a combination of host only networking plus routing software on the host operating system 31 VMware Workstation 5 User s Manual 32 Host Operating System VMware Workstation is available for both Windows and Linux host operating systems Windows Host Operating Systems 32 Bit Workstation supports the following Windows 32 bit host operating systems e Windows Server 2003 Web Edition Windows Server 2003 Standard Edition Windows Server 2003 Enterprise Edition Service Pack 1 Listed versions are also supported with no service pack e Windows XP Professional and Windows XP Home Edition Service Pack 1 or 2
473. sure that each virtual machine stabilizes before the next virtual machine boots You can use teams to e Virtualize multitier environments Start separate client server and database virtual machines with one click Configure start up delay times so clients don t submit queries before the server is ready e Virtualize multiple machine testing environments Set up a software package for QA on a virtual machine and configure automation on other virtual machines to test the first e Virtualize network performance and security LAN segments offer enhanced performance and security A team LAN segment is fully contained undetectable and inaccessible from any other network inside or outside the team Team networking lets you e Isolate a team completely from the host network e Create a virtual DMZ or proxy server to securely bridge the team members to the outside network e Allow specific network bandwidth and packet loss to each virtual machine on the team e Connect all team members fully to host resources You control all traffic allowed between the host network and team virtual machines e Monitor multiple virtual machines Use thumbnail views of the virtual machine displays to review activity on team virtual machines simultaneously www vmware com Creating and Deleting Teams This section discusses the following topics e Making a New Team on page 301 e Opening a Team on page 305 e Closing a Team o
474. t server Unlimited Kbps 0 loss Bandwidth Modem 56 Kbps 56 Kbps Packet Loss 03 gz 3 Select the LAN segment you want to rename 4 Type anew na 5 Click OK me in the Name field The LAN segment now has the new name Deleting a LAN Segment To delete a LAN segment from a team 1 Choose Team 2 Click the LAN 3 Select the LA 4 Click Remove gt Settings Segments tab segment you want to delete The LAN segment is removed Note Deleting a LAN segment disconnects all virtual Ethernet adapters that are configured for that LAN segment When you remove a virtual machine from a team you must manually configure its disconnected virtual Ethernet adapter if you want to reconnect the virtual machine to a network CHAPTER 11 Configuring Teams 315 VMware Workstation 5 User s Manual 316 The Startup Sequence In the start up sequence you can specify e The order in which team virtual machines start and stop Team virtual machines start one at a time in the order you set in the start up sequence Setting the start up sequence is useful for example if you have a virtual machine that runs an application to be tested and you want it to start before the virtual machines running an automated testing script The delay between team members in the sequence You can set the time that Workstation delays after starting or stopping a virtual machine before starting or stopping the
475. t Log It is saved in your temp folder On a Windows 2000 Windows XP or Windows Server 2003 host the default location is C Documents and Settings lt username gt Local Settings Temp You can use the command cd temp to locate the Local Settings folder which is hidden by default To see its contents open My Computer go to Tools gt Folder Options click the View tab and select Show Hidden Files and Folders www vmware com CHAPTER 1 Introduction and System Requirements Be sure to register your serial number You may then report your problems by submitting a support request at www vmware com requestsupport Experimental Support For some features that are not fully developed VMware Workstation includes experimental support so that advanced customers can explore an in progress implementation of these features Caution You should not use experimentally supported features on production systems VMware may not respond individually to all support requests for features that are supported experimentally VMware is interested in e Catastrophic failures that cause Workstation or the guest operating system to crash e Specific problems you are having when using the experimentally supported feature e Specific directions in which you want to see VMware technology evolve Specific and detailed reports can help speed features from experimental support to full functionality Please include as many details about your configuration rel
476. t Yes the wizard continues 5 Click Add to add virtual machines to your team New Team Wizard x Add Virtual Machines to the Team Use the Add and Remove buttons to set up the virtual machines in thie team Virtual Machine Guest 0S A drop down menu appears with three options e New Virtual Machine Select this option to launch the New Virtual Machine Wizard See Setting Up a New Virtual Machine on page 114 e Existing Virtual Machine Select this option to open a file browser from which you can navigate the host file system to locate an existing vmx file When you add a virtual machine to a team it can no longer be accessed outside the team See Adding an Existing Virtual Machine to a Team on page 307 www vmware com 6 7A e New Clone of Virtual Machine Select this option to open a file browser from which you can navigate the host file system to locate an existing vmx file After you select a virtual machine Workstation launches the Clone Virtual Machine Wizard See The Clone Virtual Machine Wizard on page 292 Click Next If you wish add LAN segments to your team New Team Wizard Add LAN Segments to the Team LAN Segments are connections private to the Team that can be used to connect a team s virtual machines to each other Would you lke to add LAN segments to the team now Oka O No will add LAN segments later You can add LAN segments at any time using the Te
477. t creates files that define the virtual machine including a virtual machine configuration file and optionally a virtual disk or physical disk file See also Virtual machine settings editor Parent The source or original virtual machine from which you take a snapshot or make a clone A full clone has no continued link to its parent but a linked clone and a snapshot each depend on the parent in an ongoing manner If you delete the parent virtual machine any linked clone or snapshot becomes permanently disabled To prevent deletion you can create a template virtual machine See also Full clone Linked clone Snapshot and Template 473 VMware Workstation 5 User s Manual 474 Physical disk A hard disk in a virtual machine that is mapped to a physical disk drive or a partition of a drive on the host machine A physical disk is also referred to as a raw disk A virtual machine s disk can be stored as a file on the host file system see Virtual disk or on a local hard disk When a virtual machine is configured to use a physical disk VMware Workstation directly accesses the local disk or partition as a physical device not as a file on a file system It is possible to boot a previously installed operating system on an existing partition within a virtual machine environment The only limitation is that the existing partition must reside on a local IDE or SCSI drive See also Virtual disk Quick switch mode A
478. t for NBNS queries nbnsRetries 3 Number of retries for each NBNS query nbdsTimeout 3 Timeout for NBDS queries The incomingtcp Section This section is used to configure TCP port forwarding for NAT In this section you can assign a port number to an IP address and port number on a virtual machine The following line shows the format used in this section 8887 192 168 27 128 21 This example creates a mapping from port 8887 on the host to the IP address 92 168 27 128 and port 21 When this mapping is set and an external machine connects to the host at port 8887 the network packets are automatically forwarded to port 21 the standard port for FTP on the virtual machine with IP address 92 168 27 128 The incomingudp Section This section is used to configure UDP port forwarding for assign a port number to an IP address and port number on The following line shows the format used in this section It X server traffic from the host port 6000 to the virtual machi 6000 192 168 27 128 6001 AT In this section you can a virtual machine illustrates a way to forward ne s port 6001 This example creates a mapping from port 6000 on the host to the IP address 92 168 27 128 and port 6001 When this mapping is set and an external machine connects to the host at port 6000 the network packets are automatically forwarded to port 6001 on the virtual machine with IP address 192 168 27 128 371 VMware Work
479. t on You can also open a virtual machine by right clicking its configuration file to display a context menu in which you can choose whether to open the virtual machine in Workstation or in VMware Player Note VMware Player can play only one virtual machine at a time You must close the VI V vi vi rtual machine currently running in VMware Player before you can open another rtual machine Configuring VMware Player ware Player is primarily a vehicle for playing virtual machines and does not contain the full feature set found in Workstation and other VMware products ware Player does provide the following features e You can connect and disconnect any Workstation supported devices in the virtual machine e You can change the amount of memory allocated to the virtual machine e You can set the type of network connection for the virtual machine bridged host only or NAT e You can copy and paste from the virtual machine to the host and vice versa To use this feature you must have VMware Tools installed e You can drag and drop files from the virtual machine to the host and vice versa To use this feature you must have VMware Tools installed You can set preferences for how commands are displayed in the player interface and for how the player closes a virtual machine by powering it off or by suspending it when you exit VMware Player For instructions on using these features see the online help prov
480. t the virtual machine captures control of keyboard and mouse Note The option Grab when cursor enters window allows you to move the mouse pointer back into the virtual machine window easily if you have been working in the virtual machine then temporarily moved the mouse pointer outside the virtual machine window The mouse pointer is grabbed only when VMware Workstation has focus is the active application Also if you release the mouse pointer by pressing a hot key combination Ctrl Alt by default you must click inside the virtual machine window to make VMware Workstation grab the mouse pointer again Hot Keys Workspace Input Hot Revs Display Memory Priority Lockout Hot key combination Cuat Ott Shit ar O Custom At J Hot key changes will take effect the next time this virtual machine is started The Hot Key tab lets you change the key combination that determines whether certain combinations of keys are passed to the guest operating system or intercepted by VMware Workstation Note Because Ctrl Alt is the key combination used to tell VMware Workstation to release ungrab mouse and keyboard input combinations that include Ctrl Alt are not passed to the guest operating system If you need to use such a combination 89 VMware Workstation 5 User s Manual 90 for example use Ctrl Alt lt Fkey gt to switch between Linux workspaces in a virtual machine press Ctrl Alt Space relea
481. t to dismiss the Welcome dialog box if VMware Workstation Welcome to the installation wizard for VMware Workstation The installation wizard wil install VMware Workstation on your computer To continue cick Next WARNING This program is protected by copyright law and international treaties www vmware com 48 CHAPTER 2 Installing VMware Workstation 4 Acknowledge the end user license agreement EULA i VMware Workstation License Agreement Please read the Following license agre END USER LICENSE AGREEMENT FOR VMWARE DESKTOP SOFTWARE PRODUCT VMWARE INC LICENSES THIS DESKTOP SOFTWARE PRODUCT TO YOU SUBJECT TO THE TERMS CONTAINED IN THIS END USER LICENSE AGREEMENT EULA READ THE TERMS OF THIS EULA CAREFULLY BY INSTALLING COPYING OR OTHERWISE USING THE SOFTWARE AS DEFINED BELOW YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA IF YOU C Nes Ta No I do not acce wa Select the Yes accept the terms in the license agreement option then click Next 5 Choose the directory in which to install VMware Workstation i VMware Workstation Destination Folder Click Next to install to this folder o Install VMware Workstation to C Program Files Mware wMware Workstation To install it in a directory other than the default click Change and browse to your directory of choice If the directory does not exist the installer creates it for you Click Next Caution
482. ta may be corrupted See Shutting Down a Virtual Machine on page 162 for more information Suspend and Resume see Suspending and Resuming Virtual Machines on page 161 for a description Reset see Resetting a Virtual Machine on page 163 for a description This command resets the active virtual machine just as pressing the hardware reset button resets a physical PC Caution If a virtual machine is writing to disk when it receives a reset Command data may be corrupted See Resetting a Virtual Machine on page 163 for more information Shut Down Guest This command sends a shut down signal to the guest operating system Some guest operating systems do not respond to this command Restart Guest This command sends a restart signal to the guest operating system Some guest operating systems do not respond to this command Suspend after running script This command prompts you for a script to execute before suspending the guest operating system See Command Line Reference on page 102 for information about scripts Resume and run script This command prompts you for a script to execute after resuming the guest operating system See Command Line Reference on page 102 for information about scripts Power on and run script This command prompts you for a script to execute after powering on the guest operating system See Command Line Reference on page 102 for information about scripts www vmware com CHAPTER 11
483. tation 5 User s Manual 470 Guest ACPI S1 Sleep Workstation 5 provides experimental support for guest operating system ACPI S1 sleep Not all guest operating systems support this feature Common guest operating system interfaces for entering standby are supported By default ACPI S1 sleep is implemented within Workstation as suspend The Workstation resume button can be used to wake the guest With the following entry in the vmx configuration file for a virtual machine chipset onlineStandby TRUE ACPI S1 sleep is instead implemented as power on suspend The guest operating system is not fully powered down You can awaken the virtual machine e Using keyboard input e Using mouse input e Through programming the CMOS external timer This feature can be useful for test and development scenarios www vmware com CHAPTER Glossary Administrative Lockout a global setting providing password protection for Windows hosts Administrative lockout restricts users from creating new virtual machines editing virtual machine configurations and changing network settings Bridged networking A type of network connection between a virtual machine and the rest of the world Under bridged networking a virtual machine appears as an additional computer on the same physical Ethernet network as the host See also Host only networking Clone A duplicate copy of a virtual machine See also Full clone and Linked clone Clo
484. te testing environment or one that interacts with your network as usual Refer to the Configuring Teams on page 299 for a complete description of teams 167 VMware Workstation 5 User s Manual 168 Controlling the Display You can control the VMware Workstation display in a variety of ways to suit the way you prefer to work with your virtual machines e Using Full Screen Mode on page 168 e Using Quick Switch Mode on page 169 e Taking Advantage of Multiple Monitors on page 169 e Fitting the Workstation Console to the Virtual Machine Display on page 170 e Nonstandard Resolutions on page 172 e Simplifying the Screen Display on page 172 Using Full Screen Mode In full screen made the VMware Workstation virtual machine display fills the screen so you no longer see the borders of the VMware Workstation window To enter full screen mode click the Full Screen button on the toolbar or press Ctrl Alt Enter To switch from full screen mode back to normal mode which shows your virtual machine inside a VMware Workstation window again press Ctrl Alt Virtual machines run faster in full screen mode Linux hosts You can switch between virtual machines without leaving full screen mode by using a Ctrl Alt Fn key combination where Fn is a function key corresponding to the virtual machine you want to see To find out what function key to use for a particular virtual machine check the title bar of the virtual machine while it is r
485. ted by the Linux host Caution A physical disk partition should not be used mounted simultaneously by the host and the guest operating system Because each operating system is unaware of the other data corruption may occur if both operating systems read or write to the same partition It is critical that the virtual machine not be allowed to modify any partition mounted under the Linux host or in use by another virtual machine To safeguard against this problem be sure the partition you use for the virtual machine is not mounted under the Linux host Set the device group membership or device ownership The master physical disk devices must be readable and writable by the user who runs VMware Workstation On most distributions the physical devices such as dev hda and dev hdb belong to group id disk If this is the case you can add VMware Workstation users to the disk group Another option is to change the owner of the device Please think carefully about security issues when you explore different options here It is typically a good idea to grant VMware Workstation users access to all dev hd abcd physical devices that contain operating systems or boot managers and then rely on VMware Workstation s physical disk configuration files to guard access This provides boot managers access to configuration and other files they may need to boot the operating systems For example LILO needs to read boot on a Linux partitio
486. ter from the list of adapters Workstation uses for automatic bridged networking on VMnet0 To exclude one or more physical Ethernet adapters 1 Choose Edit gt Virtual Network Settings 2 Click the Automatic Bridging tab 3 Click Add to put the physical adapter in the list of excluded devices Select the network adapters that should not be bridged to VMnet0 MB Linksys NC100 Fast Ethernet Adapter Packet Scheduler Miniport P Networking Adapter Pack Mi y PC 339 VMware Workstation 5 User s Manual 4 Inthe Add Excluded Adapters dialog box select the listing for the adapter you want to exclude then click OK Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT Use this page to contol the automatic bridging of VMnet0 to the first available physical Ethernet adapter on the host Automatic bridging Wiutomatically choose an available physical network adapter to biidge ta Vidnettl Excluded adapters Do not attempt to automaticaly bridge to the folowing adapters B9 Realtek RTL8139 Family PCI Fast Ethemet NIC Packet Scheduler Miniport 5 Click OK to save your changes and close the virtual network editor Removing a Host Ethernet Adapter from the Excluded Adapters List To remove an adapter from the list of excluded adapters 1 Choose Edit gt Virtual Network Settings 2 Click the Automatic Bridging tab 3 Select the name of the ada
487. the target operating system from the list of options offered by the boot manager Remember that your virtual machine hardware environment which the guest operating system is about to run in for the first time probably differs significantly from the physical hardware of your host computer For Windows guest operating systems Plug and Play reconfigures Windows Set up your virtual hardware profile with the devices found and configured by Plug and Play See Setting Up Hardware Profiles in Virtual Machines on page 247 for more information Install VMware Tools in your guest operating system Warning If you take snapshots while using your physical disk before you reboot your guest operating system natively you must either Revert to a snapshot and delete all other snapshots Delete all snapshots This is necessary because any changes to sectors on the physical disk that have been modified on the disk invalidate all snapshots for the disk Configuring a Linux Host 1 If you are running a Windows guest operating system read Setting Up Hardware Profiles in Virtual Machines on page 247 You should boot the guest operating system natively on the computer and create a hardware profile for the virtual machine before proceeding Create a separate configuration for each guest operating system Check operating system partition mounts Be sure the existing disk partitions that you plan to configure the virtual machine to use are not m
488. the virtual machine that are important in work environments where virtual machines need to be isolated from each other and from the host computer Tsolation tools copy enable The value of this option determines whether data in one virtual machine or the host operating system can be copied in a way that allows it to be transferred to another virtual machine or to the host operating system Possible values are true such copying is allowed and false such copying is not allowed The default value is true The setting for this option should be the same as the setting for TIsolation tools paste enable below Isolation tools paste enable The value of this option determines whether data copied in one virtual machine or the host operating system can be pasted into another virtual machine or the host operating system Possible values are true such pasting is allowed and false such pasting is not allowed The default value is true The setting for this option should be the same as the setting for Isolation tools copy enable above Isolation tools HGFS disable The value of this option determines whether virtual machines can be configured with shared folders for sharing files among virtual machines and with the host computer Possible values are true shared folders are disabled and false shared folders are enabled The default value is false The following entries are required in the global configuration file config ini and must not
489. this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial connection For more information see Special Configuration Options for Advanced Users on page 405 Click Finish then click OK to close the virtual machine settings editor In the client virtual machine 1 2 3 Open the virtual machine settings editor VM gt Settings Click Add to start the Add Hardware Wizard Select Serial Port then click Next Add Hardware Wizard Specify Named Pipe Which named pipe should this serial port connect to Named pipe WA pipe com_1 This end is the client The other end isa vitusl machine Device status Z Connect at power on lt Back Finish Cancel Select Use named pipe Use the default name or enter another pipe name of your choice The pipe name must follow the form pipe lt namedpipe gt that is it must begin with pipe The pipe name must be the same on both server and client Select This end is the client Select The other end is a virtual machine By default the device status setting is Connect at power on You may deselect this setting if you wish Click Advanced if you want to configure this serial port to use polled mode This option is of interest primarily to developers who are using debugging tools that communicate over a serial
490. tion on a Linux host you must choose to make bridged networking available to your virtual machines When you create a new virtual machine using bridged networking the bridge is set up automatically You can set up additional virtual bridges for custom configurations that require connections to more than one physical Ethernet adapter on the host computer 327 VMware Workstation 5 User s Manual 328 Host Virtual Adapter The host virtual adapter is a virtual Ethernet adapter that appears to your host operating system as a VMware virtual Ethernet adapter on a Windows host and as a host only interface on a Linux host The host virtual adapter allows you to communicate between your host computer and the virtual machines on that host computer The host virtual adapter is used in host only and NAT configurations The host virtual adapter is not connected to any external network unless you set up special software on the host computer a proxy server for example to connect the host only adapter to the physical network adapter The software that creates the host virtual adapter is installed when you install VMware Workstation on a Linux host you must choose to make host only networking available to your virtual machines A host virtual adapter is then created automatically when you boot the host computer You can set up additional host virtual adapters as needed NAT Device The NAT network address translation
491. tion performs an internal check if the host CPU is not a supported 64 bit processor you cannot power on the virtual machine For the list of processors Workstation supports for 64 bit guest operating systems see Support for 64 Bit Guest Operating Systems on page 37 191 VMware Workstation 5 User s Manual 192 Moving Virtual Machines between Multiprocessor and Uniprocessor Hosts For all supported configurations of 32 bit and 64 bit host and guest operating systems running on multiprocessor host machines versions 5 5 and later of Workstation support two way virtual Symmetric Multiprocessing SMP This enables you to assign two virtual processors to a virtual machine This is supported only for host machines with at least two logical processors Note Ifthe host is a uniprocessor machine assigning two processors is neither supported nor recommended a warning message will appear You can disregard this message and assign two processors to the virtual machine but once you have finished creating the virtual machine you will not be able to power it on unless you move it to a host machine with at least two logical processors You can use Workstation 5 5 or later running on a multiprocessor host machine to open a virtual machine created in VMware ESX Server that has one or more virtual processors However in Workstation only two virtual processors will be assigned to the virtual machine even if more processors were assigned
492. tion 5 User s Manual 42 If a virtual machine exits abnormally or crashes please run the support script to collect the appropriate log files and system information Follow the steps below that apply to your host computer Windows Host 1 Open a command prompt 2 Change to the VMware Workstation program directory Ce cd Program Files VMware VMware Workstation If you did not install the program in the default directory use the appropriate drive letter and path in the cd command above 3 Run the support script cscript vm support vbs 4 After the script runs it displays the name of the directory where it has stored its output Use a file compression utility such as WinZip or PKZIP to zip that directory and include the zip file with your support request Linux Host 1 Open a terminal 2 Run the support script as the user who is running the virtual machine vm support If you are not running the script as root the script displays messages indicating that it cannot collect some information This is normal If the VMware support team needs that information a support representative will ask you to run the script again as root 3 The script creates a compressed tgz file in the current directory Include that output file with your support request If you are reporting a problem you encountered while installing VMware Workstation it is also helpful to have your installation log file On a Windows host the file is VMIns
493. tion for the file that stores access information for this physical disk or change it if you want to use a different name or location To find a different directory click Browse Click Advanced if you want to specify the virtual machine SCSI or IDE device node to which this disk is connected Add Hardware Wizard Select a Device Node Which device node should this disk be attached to Virtual device node IDE 01 Mode C Independent Independent disks are not affected by snapshots this disk ar napa On the advanced settings screen you can also specify a disk mode This is useful in certain special purpose configurations in which you want to exclude disks from a snapshot For more information on the snapshot feature see Using Snapshots on page 273 Normal disks are included in snapshots In most cases this is the setting you want with Independent deselected Independent disks are not included in snapshots If you select Independent you have the following options e Persistent changes are immediately and permanently written to the disk e Nonpersistent changes to the disk are discarded when you power off or revert to a snapshot When you have set the filename and location you want to use and have made any selections you want to make on the advanced settings screen click Finish 7 The wizard configures the new physical disk If the partitions used on the physical disk are not formatted for your guest op
494. to create a virtual machine using a virtual disk 1 Start VMware Workstation Windows hosts Double click the VMware Workstation icon on your desktop or use the Start menu Start gt Programs gt VMware gt VMware Workstation Linux hosts In a terminal window enter the command vmware amp Note On Linux hosts the Workstation installer adds an entry to the Start menu for VMware Workstation However this menu entry is located in different submenus depending on your Linux distribution For example e SUSE Linux 9 1 Start gt System gt More Programs gt VMware Workstation e RedH at Enterprise Linux AS WS Release 3 Start gt System Tools gt More System Tools gt VMware Workstation 2 If this is he first time you have launched VMware Workstation and you did not enter the serial number when you installed the product an option available on a Window registrati s host you are prompted to enter it The serial number is on the on card in your package or in the email message confirming your electron ic distribution order Enter your serial number and click OK 114 www vmware com CHAPTER 5 Creating a New Virtual Machine The serial number you enter is saved and VMware Workstation does not ask you for it again For your convenience VMware Workstation automatically sends the serial number to the VMware Web site when you use certain Web links built into the product for example Help gt V
495. to make backup copies of all the files in your virtual machine s directory before you start a process like this This section discusses the following topics regarding moving a Workstation 4 virtual machine e Preparing Your Workstation 4 Virtual Machine for the Move on page 196 e Moving a Workstation 4 Virtual Machine to a New Host Machine on page 197 195 VMware Workstation 5 User s Manual Preparing Your Workstation 4 Virtual Machine for the Move 1 Use VMware Workstation 4 to open the virtual machine 2 Be sure the guest operating system is completely shut down If the virtual machine is suspended resume it then shut down the guest operating system 3 Doone of the following e Ifyou are moving the virtual machine to a new host and have a network connection between the original host machine and the new host you are finished with the preparations on the original host Otherwise you need to have a way of moving the virtual disk vmdk files from the virtual machine s directory to the new host You could move them to a shared network directory for example or burn them to CD ROMs if they are not too large Once you know how you are going to move the virtual machine go to Moving a Workstation 4 Virtual Machine to a New Host Machine on page 197 e Ifyou are moving this virtual machine to another directory on the same host you are ready to make the move Copy all the files in the virtual machine s original direc
496. to power on in the sequence specified in Team gt Settings See The Startup Sequence on page 316 for more information Powering Off a Team To power off a team 1 Select the team to power off select the team from the Favorites list or click the summary tab for the team 2 Click the Power Off button on the toolbar The team begins to power off in the sequence specified in Team gt Settings See The Startup Sequence on page 316 for more information Shutting Down a Virtual Machine When You Power Off a Team When you power off a team the default settings for a virtual machine can cause the guest operating system to terminate abruptly For information about configuring your virtual machine to recognize the shut down guest command when you power off a team see Shutting Down a Virtual Machine on page 162 www vmware com CHAPTER 11 Configuring Teams Suspending a Team When you suspend a team the virtual machines in the team are suspended To suspend a team of virtual machines 1 Select the team to suspend select the team from the Favorites list or click the summary tab for the team 2 Click the Suspend button on the toolbar All team virtual machines start suspending simultaneously A progress indicator appears for each team member To see the progress of a particular team member choose Team gt Switch To gt lt virtual machine name gt The time to complete the operation varies with the size of the virtual machines
497. tom to perform a custom installation e In step 8 make a note of the folder in which you create the virtual machine You must copy all the files in this folder to the user s computer after you finish creating and configuring the virtual machine n step 16 specify the desired size for the virtual disk and select Allocate all disk space now This selection is not required but it is strongly recommended If you do not make this selection and the host computer s hard disk runs out of space for a growing virtual disk file the user sees no warning message and does not know what is causing the problem in the virtual machine Make all needed configuration settings before you configure the user s computer to launch VMware Workstation when the computer starts You cannot change Virtual Machine Settings using the virtual machine settings editor when VMware Workstation is running in full screen switch mode You may find it most convenient to finish configuring the virtual machine and to install the guest operating system and application software before you move the virtual machine to the user s computer www vmware com CHAPTER 16 Special Purpose Configuration Options Moving a Virtual Machine to the User s Computer The easiest way to move the virtual machine to the user s computer is to use a network connection to copy all the files in the virtual machine directory to a directory on the user s computer You may also move it using
498. tor VM gt Settings you can add and remove devices for a virtual machine and change device settings Virtual Machine Settings Hardware Options Device Summary Device status Memory 256 MB E Hard Disk IDE 0 0 co rom 10E 1 0 Auto detect dh Fioppy Using drive A Bridged Connected drectiy to the physical network Z Connect at power on Network connection USB Controler Present O NAT Used to share the host s IP address Audo Default adapter 1 Processors O Host only A private network shared with the host O Custom Specific virtual network To add a new device to a virtual machine open the virtual machine settings editor click Add and follow the instructions in the Add New Hardware Wizard Click OK to save your changes and close the virtual machine settings editor To change settings for a device open the virtual machine settings editor select the device and make your changes Click OK to save your changes and close the virtual machine settings editor To remove a device open the virtual machine settings editor click the name of the device and click Remove Click OK to close the virtual machine settings editor Connecting and Disconnecting Removable Devices Choose VM gt Removable Devices to connect and disconnect removable devices that you have configured for your virtual machine including floppy drives DVD CD ROM drives USB devices and Ethernet adapters while the virt
499. tory to the new location If you stored any files in directories other than the virtual machine directory be sure to move them into a directory of the same name and same position relative to the location of the virtual machine 4 Start VMware Workstation 5 and open the virtual machine you just moved Choose File gt Open then browse to the virtual machine s configuration vmx file 196 www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Moving a Workstation 4 Virtual Machine to a New Host Machine 1 Make sure VMware Workstation 5 is installed and working correctly on the new host computer Locate the virtual disk files you are moving and copy them into the new virtual machine directory Be sure to copy all the files in the virtual machine s original directory If you stored any files in directories other than the virtual machine directory be sure to move them into a directory of the same name and same position relative to the location of the virtual machine If for some reason you are not moving a file make sure you do not have any relative or absolute paths pointing to that file Use the virtual machine settings editor and check to see if your virtual machine is pointing to the correct location for files you do not move In the virtual machine settings editor select each device and be sure that any devices with associated files are pointed to the correct files Also check the Options tab to be sure the location
500. tual disk manager with virtual disks created under VMware GSX Server VMware Workstation and VMware VirtualCenter provided the virtual disk was created on a GSX Server host managed by VirtualCenter Note You cannot use the virtual disk manager to create physical disks Physical disks cannot be shrunk by the virtual disk manager or by Workstation For more information about using the virtual disk manager read the following sections e Running the VMware Virtual Disk Manager Utility on page 231 e Shrinking Virtual Disks with VMware Virtual Disk Manager on page 234 e Examples Using the VMware Virtual Disk Manager on page 235 Running the VMware Virtual Disk Manager Utility To run the VMware Virtual Disk Manager utility open a command prompt or terminal on the host operating system On a Windows host change to the directory where you installed your Workstation software By default this directory is C Program Files VMware VMware Workstation The command syntax is vmware vdiskmanager options The options you can or must use include the following Options and Parameters Description lt diskname gt The name of the virtual disk file The virtual disk file must have a vmdk extension You can specify a path to the folder where you want to store the disk files If you mapped a network share on your host operating system you can create the virtual disk on that share by providing the correct path information with the disk fil
501. tual machine This new UUID is based on the physical computer s identifier and the path to the virtual machine s configuration file in its new location This section discusses the following topics e The UUID Location and Format on page 188 e The UUID and Moving Virtual Machines on page 189 e Specifying a UUID for a Virtual Machine on page 190 e Setting the UUID for a Virtual Machine that Is Being Moved on page 190 The UUID Location and Format The UUID is stored in the SMBIOS system information descriptor It can be accessed by standard SMBIOS scanning software for example SiSoftware Sandra or the IBM utility smbios2 and used for system management in the same way you use the UUID of a physical computer The UUID is a 128 bit integer The 16 bytes of this value are separated by spaces except for a dash between the eighth and ninth hexadecimal pairs An example UUID looks like this 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff The UUID is based on the physical computer s identifier and the path to the virtual machine s configuration file This UUID is generated when you power on or reset the virtual machine As long as you do not move or copy the virtual machine to another location the UUID remains constant www vmware com 188 CHAPTER 7 Moving and Sharing Virtual Machines The UUID and Moving Virtual Machines When you power on a virtual machine that was moved or copied to a new location the followin
502. u to clone from the current state when the virtual machine has template mode enabled Name the linked clone and click Finish Workstation creates the linked clone and displays a status panel Click Done to exit the wizard www vmware com CHAPTER Configuring Teams The following sections describe virtual machine teams Teams Overview on page 300 Creating and Deleting Teams on page 301 Adding and Removing Virtual Machines on page 307 Starting and Stopping Teams on page 310 Working with Team Networks on page 313 The Startup Sequence on page 316 Working with the Team Console View on page 317 Editing Team Settings on page 319 Command Line for Teams on page 323 299 VMware Workstation 5 User s Manual 300 Teams Overview VMware Workstation teams allow you to set up a virtual computer lab on one host computer You can now power on multiple associated virtual machines with a single click Team virtual machines can use networking just as other virtual machines can In addition team members can communicate in private networks called LAN segments LAN segments are completely independent of and invisible to the host computer s network Team settings control the start up order and timing for team virtual machines you can set up specific delays between booting virtual machines so the host CPU load is spread out Teams automatically launch virtual machines in the right order with delays that you specify to en
503. ual machine is running When you choose VM gt Removable Devices a submenu appears Choose a device from that menu to connect or disconnect it and to edit device settings If you choose Edit a dialog box appears Make all the changes you want to make then click OK www vmware com CHAPTER 6 Running VMware Workstation Creating a Screen Shot or a Movie of a Virtual Machine This section describes how to capture a visual record of a virtual machine in a screen shot or movie Creating a Screen Shot of a Virtual Machine You can capture a screen shot of a virtual machine Choose VM gt Capture Screen You can save this image as a bitmap bmp file on a Windows host or as a portable network graphics png file on a Linux host Creating a Movie of a Virtual Machine You can capture a movie of your activity within a virtual machine Workstation saves this image as an avi file on the host To capture a movie of virtual machine activity 1 Choose VM gt Capture Movie A save file dialog box appears 2 Enter information for your movie and click Save e Type the filename of the movie file you want to save The default name is based on the active virtual machine e Select the directory location where you want the movie to be stored e Select High Medium or Low quality from the drop down menu This choice determines the compression and therefore the file size of the resulting movie e Ifyou select Omit frames in whi
504. uce you to some of the things you Workstation and guide you through the key steps for putting it to work VMware Workstation on can do with VMware installing the software and e Later chapters provide in depth reference material for getting the most out of the sophisticated features of VMware Workstation About the Host and Guest Computers The terms host and guest describe your physical and virtual machines e The physical computer on which you install the VMware Workstation software is called the host computer and its operating system is called the host operating system e The operating system running inside a virtual machine is called a guest operating system e For definitions of these and other special terms see Gl ossary on page 471 www vmware com CHAPTER 1 Introduction and System Requirements What s New in Version 5 Unless otherwise noted the features in the following sections were introduced in version 5 0 Features that were introduced after version 5 0 are noted Multiple Snapshots VMware Workstation 5 greatly enhances the snapshot functionality available in previous releases of the product by allowing you to take a series of point in time saved to disk snapshots of running virtual machines This makes it easier to capture and switch between multiple configurations and accelerates testing and debugging Should a problem arise during testing you can easily revert to a prior stable snapshot
505. unning in a window Windows hosts For similar functionality see Using Full Screen Switch Mode on page 462 Note VMware Workstation does not support running virtual machines in full screen mode on dual monitor systems www vmware com CHAPTER 6 Running VMware Workstation Using Quick Switch Mode Quick switch mode is similar to full screen mode with the addition of tabs at the top of the screen for switching from one active virtual machine to another The virtual machine s screen is resized to fill the screen completely except for the space occupied by the tabs To enter quick switch mode choose View gt Quick Switch To view the VMware Workstation menu and toolbar while you are using quick switch mode move the mouse pointer to the top of the screen To resize a guest operating system s display so it fills as much of the screen as possible in quick switch mode choose View gt Fit Guest Now The Fit Guest Now option works only if you have the current version of VMware Tools installed in the guest operating system Note When you choose Fit Guest Now VMware Workstation adjusts the display settings of your guest operating system as needed If you subsequently run the virtual machine in normal mode you may want to change the display settings back to their previous values To get out of quick switch mode move the mouse pointer to the top of the screen to activate the menu then choose View gt Quick Switch Taking Adva
506. uns as a background activity that scans for sharing opportunities over time The amount of memory saved may vary over time for a fairly constant workload the amount generally increases slowly until all sharing opportunities are exploited www vmware com CHAPTER 15 Performance Tuning Specifying How Much RAM Is Used by All Virtual Machines The second configuration parameter you can set is the amount of RAM that VMware Workstation is allowed to reserve for all running virtual machines combined To set this parameter go to Edit gt Preferences gt Memory The reserved memory setting specifies a maximum amount of RAM that VMware Workstation is allowed to use But this memory is not allocated in advance Even if multiple virtual machines are running at the same time VMware Workstation may be using only a fraction of the RAM you specify here Any unused RAM is available to be used by other applications If all the RAM you specify here is in use by one or more virtual machines the host operating system cannot use this RAM itself or allow other applications to use it The RAM used by VMware Workstation includes the RAM made available to the guest operating systems plus a small amount of overhead memory associated with running a virtual machine The amount of RAM actually used for a particular virtual machine varies dynamically as a virtual machine runs If multiple virtual machines run simultaneously they work together to manage th
507. upports a partial emulation of bidirectional PS 2 style ports On Linux hosts VMware Workstation requires that the parallel port PC style hardware option CONFIG_PARPORT_PC be built and loaded as a kernel module that is it must be set to m VMware Workstation is unable to use parallel port devices if CONFIG_PARPORT_PC is built directly compiled into the kernel This limitation exists because CONFIG_PARPORT_PC does not correctly export its symbols Parallel Ports Parallel ports are used by a variety of devices including printers scanners dongles and disk drives Currently VMware Workstation provides only partial emulation of PS 2 hardware Specifically interrupts requested by a device connected to the physical port are not passed to the virtual machine Also the guest operating system cannot use DMA direct memory access to move data to or from the port For this reason not all devices that attach to the parallel port are guaranteed to work correctly Installation in Guest Operating Systems If the virtual machine is configured with a parallel port most guest operating systems automatically detect it at installation time and install the required drivers Some operating systems including Linux Windows NT and Windows 2000 automatically detect the ports at boot time Others like Windows 95 and Windows 98 do not To add a parallel port to the virtual machine s configuration take these steps with the virtual machine
508. ur guest operating system Warning If you take snapshots while using your physical disk before you reboot your guest operating system natively you must either e Revert to a snapshot and delete all other snapshots e Delete all snapshots This is necessary because any changes to sectors on the physical disk that have been modified on the disk invalidate all snapshots for the disk Setting Up Hardware Profiles in Virtual Machines Certain operating systems use hardware profiles to load the appropriate drivers for a given set of hardware devices If you have a dual boot system and want to use a virtual machine to boot a previously installed operating system from an existing partition you must set up physical and virtual hardware profiles Only users who are familiar with VMware Workstation virtual machines and the Windows hardware profiles concept should attempt this If you haven t already done so review Configuring Dual or Multiple Boot Systems to Run with Workstation on page 241 before proceeding CHAPTER 8 Using Disks 247 VMware Workstation 5 User s Manual 248 Each virtual machine provides a platform that consists of the following set of virtual devices e Virtual DVD CD ROM e Virtual IDE and SCSI hard disk drives Wn tandard PCI graphics adapter e Standard floppy disk drive ntel 82371 PCI Bus Master IDE controller includes primary and secondary IDE controllers e BusLogic BT 958 compatible SCSI
509. ures Workstation 5 achieves its new functionality by using a new virtual machine format a format that is not compatible with the legacy disk format used by these VMware applications e Workstation 4 x e GSX Server 3 x e ESX Server 2 x e VMware ACE 1 x VMware Workstation 5 does work with legacy virtual disks allowing easy integration into environments using these other VMware products The following sections discuss your options for using Workstation 5 in a mixed environment with legacy virtual machines created in Workstation 4 x GSX Server 3 x ESX Server 2 x or VMware ACE 1 x e Upgrading a Legacy Virtual Machine for New Features of Workstation 5 on page 269 e Using a Legacy Virtual Machine without Upgrading on page 269 e Creating a Legacy Virtual Machine with Workstation 5 on page 269 www vmware com CHAPTER 8 Using Disks Upgrading a Legacy Virtual Machine for New Features of Workstation 5 In order to use features of Workstation 5 with legacy virtual machines you must upgrade the virtual machine hardware as described in Use a Legacy Virtual Machine with Upgrade on page 68 Note After the upgrade the virtual machine is fully compatible with virtual machines created in Workstation 5 You cannot use the upgraded virtual machine in Workstation 4 x GSX Server 3 x ESX Server 2 x or VMware ACE 1 x Legacy Virtual Machines and Workstation Support for 64 Bit Guest Operating Systems Workstation versions 5 5 and later su
510. uter or gateway The DHCP server in VMware Workstation 5 does not provide a means to dynamically establish a relationship between the IP address it assigns and a client s name that is to update a DNS server using DDNS If you want to use names to communicate with other virtual machines you must either edit the DHCP configuration file for VMnet1 etc vmware vmnet1 conf or use IP addresses that are statically bound to a host name Editing the DHCP server configuration file requires information that is best obtained directly from the DHCP server documentation Consult the manual pages dhepd 8 and dhcpd conf 8 Setting Up a Second Bridged Network Interface on a Linux Host If you have two Ethernet adapters installed on your host computer connected to two different networks you may want your virtual machines on that host computer to bridge to both Ethernet adapters so the virtual machines can access either or both physical networks When you install VMware Workstation on a host computer with multiple Ethernet adapters you have the option of configuring more than one bridged network You can also configure additional bridged networks at any time by rerunning vmware config pl 1 On the host computer become root su and run the VMware Workstation configuration program vmware config pl 2 If you have more than one physical Ethernet adapter one of the prompts you see is similar to this The following bridged networks have been de
511. video acceleration This feature is not fully functional For information on configuring a virtual machine for 3 D support see Experimental Support for Direct3D on page 383 Experimental Support for Guest ACPI S1 Sleep Workstation 5 VMware Tools provide experimental support for guest operating systems that enable ACPI S1 sleep This feature requires you to have the latest VMware Tools installed For detailed configuration options see Guest ACPI S1 Sleep on page 470 VMware Virtual Machine Importer Windows Hosts Only For Windows hosts this standalone utility allows you to convert your Microsoft virtual machines from either Virtual PC or Microsoft Virtual Server into a VMware virtual machine The VMware virtual machine is compatible with Workstation 4 or 5 completely independent of the previous format ready to use with all the enhanced VMware Workstation functiona the importer is incorporated into Workstation and enhanced with the ability to create VMware virtual machines from system images created with Symantec LiveState Recovery See Importing Virtual Machines and System Images from Other Formats on page 125 ty The original file remains intact In Workstation 5 5 Virtual Machine Importer Incorporated into Workstation New in v5 5 Windows Hosts Only n Workstation release version 5 5 the importer is incorporated into the Workstation program for Windows hosts When you upgrade to Workstation version
512. virtual machine powered off restrict the user interface Close the VMware Workstation window then open the virtual machine s configuration file vmx file in Notepad or another text editor Add the following line anywhere in the file gui restricted true 4 You may wish to set file permissions on the configuration file to give normal users of the system only read access to the file so they cannot manually modify the configuration 5 For the convenience of users create a shortcut to the configuration file on the desktop and give it an appropriate name www vmware com 460 CHAPTER 16 Special Purpose Configuration Options The user runs this virtual machine by double clicking the shortcut to the configuration file The virtual machine starts at the snapshot with the user interface restricted with no toolbar and no access to the Power menu or the virtual machine settings editor When the user is finished working with this virtual machine he or she closes it by choosing File gt Close The virtual machine powers off and the next time a user powers it on it returns to the snapshot To remove the restriction on the interface take the following steps 1 Power off the virtual machine and close the VMware Workstation window 2 Open the configuration file vmx file and do one of the following e Setgui restricted false e Remove or comment out the gui restricted true line Save the changes to the configuration f
513. virtual machines Windows host www vmware com CHAPTER 4 Learning VMware Workstation Basics Displaying Multiple Virtual Machines at the Same Time If you want to view more than one virtual machine when they are not all on the same team you can open multiple Workstation windows and launch one or more virtual machines in each Workstation window Alternately you can use a team to coordinate and use multiple virtual machines within a single console window See Displaying Teams on page 317 for a complete description of the console view for teams The Toolbar The toolbar area at the top of the Workstation window contains buttons you can click to power your virtual machines on and off change the Workstation display and manage snapshots The following sections describe the toolbar buttons To customize the toolbar display see Customizing the Toolbar on page 81 BT My Virtual Machine VMware Workstation File Edt View YM Team Windows Help anpe GAD BB ips Toolbar for virtual machine Windows host Caution When a team is active clicking the power on power off suspend resume or reset button affects all the virtual machines on that team Power Off This button turns off the active virtual machine or team like the power button on a hardware PC You can configure Workstation for a soft power off called shut down or a hard power off called power off See Shutting Down a Virtual Machine on page 162 or Starting and Stopping
514. w vmware com CHAPTER 13 Configuring Video and Sound Enabling Accelerated 3 D for a Host To enable a host for accelerated 3 D Hardware Use a host video card with support for accelerated OpenGL such as NVIDIA TNT GeForce and Quadro cards or ATI FireGL and Radeon 8500 or higher video cards If you are unsure check with your hardware manufacturer Software Upgrade the video drivers for your host to the latest available e NVIDIA drivers are available at www nvidia com content drivers drivers asp e All drivers are available at www ati com support driver htm e Linux only NVIDIA GPUs support the features used in Direct3D acceleration Linux open source drivers are not enabled However if you have a video card with an Radeon 8500 or better GPU you can attempt to use the Direct3D acceleration using the ATI driver available at www ati com support drivers linux radeon linux html Windows Perform these steps to prepare a Windows 2000 or Windows XP host Make sure hardware acceleration is turned up in the display properties 1 Right click the desktop and choose Properties gt Settings gt Advanced gt Troubleshoot 2 Move the Hardware Acceleration slider all the way to the Full position Linux Perform these steps to test your Linux host for compatibility 1 To verify that direct rendering is enabled run glxinfo grep direct 2 To ensure that 3 D applications work on your host run glxgears After y
515. want to remove Click the summary or console tab for the desired team or select the team name in the Favorites list 2 Choose Team gt Remove gt lt virtual machine name gt The selected virtual machine is removed from the team You can now use it independently 307 VMware Workstation 5 User s Manual 308 Note When you remove a virtual machine from a team you also remove it from team LAN segments Virtual network adapters associated with LAN segments become disconnected Bridged host only NAT and vmnet configurations remain unchanged If you want to completely delete a virtual machine and erase its files from the host file system see Deleting a Virtual Machine on page 166 Teams and the Favorites List When you add a virtual machine to a team it is automatically deleted from the Favorites list However a virtual machine is not automatically added to the Favorites list when you remove it from a team You must manually add a virtual machine to the Favorites list after removing it from a team See Adding an Item to the Favorites List on page 84 www vmware com CHAPTER 11 Configuring Teams Cloning and Taking Snapshots of Team Members Cloning a Virtual Machine in a Team You can clone a virtual machine in a team in the same way you clone any other virtual machine See Creating Clones on page 292 When you clone a virtual machine in a team e The resulting clone is not part of the team e The clone autom
516. want to use Bridged NAT Host only or Custom If you select Custom choose the VMnet virtual network you want to use for the network from the drop down list Click OK to save your changes and close the virtual machine settings editor Be sure the guest operating system is configured to use an appropriate IP address on the new network If the guest is using DHCP release and renew the lease If the IP address is set statically be sure the guest has an address on the correct virtual network 337 VMware Workstation 5 User s Manual Configuring Bridged Networking Options on a Windows Host Note The virtual network editor is not available on a Linux host Use the virtual network editor to configure bridged networking You can e View and change the settings for bridged networking on your host e Determine which network adapters on your host to use for bridged networking e Map specific network adapters to specific virtual networks called VMnets Note The changes you make to bridged networking affect all virtual machines using bridged networking on the host Configuring VMnet0 Bridged Networking 1 Choose Edit gt Virtual Network Settings The virtual network editor appears with the Summary tab active Virtual Network Editor Summary Automatic Bridging Host Virtual Network Mapping Host Virtual Adapters DHCP NAT Here is a summary of your vitual networks Use the other pages of this editor to change the settings of your n
517. ware Wizard Select the default action Install the software automatically Once the software is installed the guest operating system detects the USB device and searches for a suitable driver When you are synchronizing a PDA such as a Palm handheld or Handspring Visor to a virtual machine for the first time the total time required to load the VMware USB device driver in the host and the PDA driver in the guest may exceed the device s connection timeout value This causes the device to disconnect itself from the computer before the guest can synchronize with it If this occurs let the guest finish installing the PDA driver dismiss any connection error warnings then try synchronizing the PDA again The second attempt should succeed Replacing USB 2 0 Drivers on a Windows 2000 Host To use VMware Workstation 5 on a Windows 2000 host that has USB 2 0 ports you must use the Microsoft USB 2 0 drivers for the USB controller in the host operating system If your host operating system is using a third party driver a driver supplied by your motherboard vendor for example you must replace it Take the following steps to check the provider of your driver 1 Go to the Device Manager Right click My Computer choose Properties click the Hardware tab then click Device Manager 2 Expand the listing for Universal Serial Bus controllers 3 Right click the listing for the controller and choose Properties 4 Click the Driver ta
518. when the virtual machine was created in ESX Server In this case in the Workstation virtual machine settings editor VM gt Settings in the Hardware tab under Processors the field Number of Processors will display the entry Other x where x is the number of processors originally assigned in ESX Server Workstation preserves the original configuration setting for the number of processors You can change this setting However once you commit a change to this setting by clicking OK in VM gt Settings the original configuration setting for number of processors is discarded and no longer appears as an option in VM gt Settings If you move a virtual machine created in VMware ESX Server or Workstation with more than one virtual processor to a uniprocessor host the guest operating system consumes 100 of the host CPU s processing capacity even when the guest operating system is essentially idle To prevent this in the Workstation virtual machine settings editor VM gt Settings in the Hardware tab under Processors change the setting for Number of Processors to 1 For more about Workstation support for virtual Symmetric Multiprocessing SMP see Using Two Way Virtual Symmetric Multiprocessing Experimental on page 429 www vmware com CHAPTER 7 Moving and Sharing Virtual Machines Virtual Machines Use Relative Paths The path names for all files associated with a VMware Workstation 5 virtual machine are relative meaning the
519. work select None and the virtual network will be removed What type of virtual network do you wish to set vmnet1 bridged hostonly nat none hostonly none 345 VMware Workstation 5 User s Manual Advanced Networking Topics The following sections describe advanced networking topics e Selecting IP Addresses on a Host only Network or NAT Configuration on page 347 e Avoiding IP Packet Leakage in a Host Only Network on page 350 e Maintaining and Changing the MAC Address of a Virtual Machine on page 352 e Controlling Routing Information for a Host only Network on a Linux Host on page 354 e Other Potential Issues with Host Only Networking on a Linux Host on page 355 e Setting Up a Second Bridged Network Interface on a Linux Host on page 356 e Setting Up Two Separate Host Only Networks on page 357 e Routing between Two Host Only Networks on page 360 e Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host on page 364 346 www vmware com CHAPTER 12 Configuring a Virtual Network Selecting IP Addresses on a Host only Network or NAT Configuration A host only network uses a private virtual network The host and all virtual machines configured for host only networking are connected to the network through a virtual switch Typically all the parties on this private network use the TCP IP protocol suite although other communication protocols may be used A network address translation NAT configuration also
520. work on a Windows 2000 host computer check to see if forwarding has been enabled on the host machine If it is enabled disable it On a Windows 2000 or Windows Server 2003 host go to Start gt Programs gt Administrative Tools gt Routing and Remote Access An icon on the left is labeled with the host name If a green dot appears over the icon IP forwarding is turned on To turn it off right click the icon and disable Routing and Remote Access A red dot appears indicating that IP forwarding is disabled Windows 2000 Professional Users The Windows 2000 Administration Tools are not installed on a Windows 2000 Professional system However you can install these tools from a Windows 2000 Server or Windows 2000 Advanced Server CD ROM To install Windows 2000 Administration Tools on a local computer 1 Open the i386 folder on the applicable Windows 2000 Server disc 2 Double click the adminpak msi file Follow the instructions that appear in the Windows 2000 Administration Tools Setup wizard 3 After Windows 2000 Administration Tools are installed you can access most of the server administrative tools by choosing Start gt Programs gt Administrative Tools www vmware com CHAPTER 12 Configuring a Virtual Network Linux Hosts If you find packets leaking out of a host only network on a Linux host computer check to see if forwarding has mistakenly been enabled on the host machine If it is enabled disable it For many Li
521. ww vmware com CHAPTER 12 Configuring a Virtual Network 4 Configure networking in the first two virtual machines to use addresses on the appropriate host only network On Windows hosts you can open a command prompt and run ipconfig all to see what IP addresses each host only network is using On Linux hosts you can open a terminal and run if config to see what IP addresses each host only network is using 5 Ifyou are running the router on the host computer assign default router addresses based on the addresses of the host only adapters on the host computer In the first virtual machine s networking configuration the default router address should be the IP address for the hos only adapter connected to VMnet1 In the second virtual machine s networking configuration the default router address should be the IP address for the hos VMnet2 f you are running the router software in the third vi default router address should be the IP address for on tua he y adapter connected to machine set the default router addresses in the first two virtual machines based on those used by the hird virtual machine In the first virtual machine s netw orking configuration the hird virtual machine s Ethernet adapter connected to VMnet1 In the second virtual machine s networking configuration the default router address should be the IP address for he third virtual machine s Ethernet adapter connected to
522. x host and vice versa To use VMware Workstation on a different host operating system for example to use it on a Linux host if you have licensed the software for a Windows host purchase a license on the VMware Web site You may also get an evaluation license at no charge for a 30 day evaluation of the software For more information see www vmware com download To install on a supported Windows host computer see Installing VMware Workstation 5 on a Windows Host on page 47 To install on a Linux host computer see Installing VMware Workstation 5 on a Linux Host on page 54 Upgrading from Previous Versions If you are upgrading from a previous version of VMware Workstation read Upgrading VMware Workstation on page 61 before you begin Workstation Cannot Share a Host with Other VMware Products You cannot have VMware Workstation installed on the same host machine with another VMware product such as VMware GSX Server VMware ACE or the VMware Virtual Machine Console The only VMware product that can share a host machine with Workstation is the VMware VirtualCenter client software If you plan to install VMware Workstation on a host machine that already contains another VMware product you must uninstall that product first www vmware com CHAPTER 2 Installing VMware Workstation Installing VMware Workstation 5 on a Windows Host Getting started with VMware Workstation is simple The key steps are ie
523. xt FF VMware Virtual Machine Importer Specify the Source Image Specify the virtual machine or image to be used with VMware Workstation Enter the name of the configuration vme or sv2i file For the virtual machine or system image you want to import IE w2kpro w2kpro vmc Browse The importer inspects the file Mware Virtual Machine Importer rj Please wait while the Virtual Machine Importer inspects your vitual machine Note Ifyou are running Workstation on a system running Microsoft Windows 2000 or later and you are importing a Microsoft Windows NT 4 0 virtual machine or image a warning panel is displayed advising that the import process will upgrade any NTFS partitions in the resulting virtual machine to a newer version of the NTFS file system An upgraded file system is compatible with Windows 4 0 The operating system and applications will work normally However some utilities shipped with Windows NT 4 0 including chkdsk and defrag will not operate properly Microsoft provides hotfix 872952 for this issue To avoid upgrading your file system in this case press Cancel to end the import and run he importer from a computer running Windows NT to import the virtual machine or image Browse or type the path to the location you want for the VMware virtual machine and click Next FF VMware Virtual Machine Importer Specify the Destination Virtual Machine What name Would you
524. y find that when you install or run software inside a virtual machine Workstation appears to hang Generally the problem occurs early in the program s execution In many cases you can get past the problem by temporarily disabling acceleration in the virtual machine To disable acceleration select Disable acceleration then click OK This setting slows down virtual machine performance so it is recommended only for getting past the problem with running the program After you pass the point where the program was encountering problems try returning to the www ymware com 100 CHAPTER 4 Learning VMware Workstation Basics virtual machine settings editor and removing the check beside Disable acceleration You may then be able to run the program with acceleration e Disable memory page trimming Select this option to disable memory page trimming and page sharing VMware uses a memory trimming technique to return unused virtual machine guest memory to the host machine for other uses While trimming usually has little impact on performance and may be needed in low memory situations the I O engendered by memory trimming can sometimes interfere with disk oriented workload performance in a guest e Log virtual machine progress periodically This special configuration option increases logging information for debugging and troubleshooting purposes When you select this option you do not have to edit a configuration file or restart the v
525. you encounter this problem VMware recommends that you install your Windows 2000 Windows XP or Windows Server 2003 guest operating system in a virtual disk rather than running it from a physical disk If you encounter this problem but it is important for you to run the virtual machine from the existing physical disk configuration you can set up separate hardware profiles described in Setting Up Hardware Profiles in Virtual Machines on page 247 and manually update the IDE driver in the profile for the virtual machine For a detailed description of the workaround see the VMware knowledge base www vmware com info id 4 1 Setting Up the SVGA Video Driver for a Windows 95 Guest Operating System Booted from a Physical Disk This section explains how to configure the video driver in a Windows 95 physical disk installation using VMware Workstation The steps below assume you are using Windows 95 as one of the operating systems in a dual boot or multiple boot configuration Following these steps you create separate hardware profiles for your virtual machine and your physical machine For more details on hardware profiles see Setting Up Hardware Profiles in Virtual Machines on page 247 1 Boot Windows 95 natively not in a virtual machine 2 Right click the My Computer icon on the desktop then select Properties 3 Click the Hardware Profiles tab 4 Highlight the Original Configuration profile then click Copy 5 Name the profile Virtual M
526. you took the snapshot revert to the snapshot a ide buslogic 1lsilogic Specifies the disk adapter type You must specify an adapter type when creating a new virtual disk Choose one of the following types e ide for an IDE adapter e buslogic for a BusLogic SCSI adapter e 1lsilogic for an LSI Logic SCSI adapter s lt n gt GB MB Specifies the size of the virtual disk Specify whether the size lt n gt is in GB gigabytes or MB megabytes You must specify the size of a virtual disk when you create it Even though you must specify the size of a virtual disk when you expand it you do not use the s option t o 1 2 3 You must specify the type of virtual disk when you create a new one or reconfigure an existing one Specify one of the following disk types 0 to create a growable virtual disk contained in a single virtual disk file 1 to create a growable virtual disk split into 2GB files 2 to create a preallocated virtual disk contained in a single virtual disk file 3 to create a preallocated virtual disk split into 2GB files Disables virtual disk manager logging If you keep logging enabled messages generated by the virtual disk manager are stored in a log file The name and location of the log file appear in the command prompt or terminal window after the virtual disk manager command is run CHAPTER 8 Using Disks 233 VMware Workstati
527. you want to specify a device node for your virtual disk click Advanced On the advanced settings screen you can also specify a disk mode This is useful in certain special purpose configurations in which you want to exclude disks from snapshots For more information on the snapshot feature see Using Snapshots on page 273 www vmware com CHAPTER 8 Using Disks Normal disks are included in snapshots In most cases this is the setting you want with Independent deselected Independent disks are not included in snapshots If you select Independent you have the following options e Persistent changes are immediately and permanently written to the disk e Nonpersistent changes to the disk are discarded when you power off or revert to a snapshot When you have set the filename and location you want to use and have made any selections you want to make on the advanced settings screen click Finish The wizard creates the new virtual disk It appears to your guest operating system as a new blank hard disk Use the guest operating system s tools to partition and format the new drive for use Adding an Existing Virtual Disk to a Virtual Machine You can reconnect an existing virtual disk that has been removed from a virtual machine see Removing a Virtual Disk from a Virtual Machine on page 222 The virtual machine must be powered off before you begin i Open the virtual machine settings editor VM gt Settings and cli
528. ystem again as a guest or running a guest operating system that the virtual machine is not configured to use The description file also prevents accidental writes to physical disk partitions from badly behaved operating systems or applications Use the New Virtual Machine Wizard to configure VMware Workstation to use existing physical disk partitions The wizard guides you though creating a new virtual machine including configuring the physical disk description files Rerun the wizard to create a separate configuration for each guest operating system installed on a physical partition e Configuring a Windows Host on page 264 e Configuring a Linux Host on page 266 CHAPTER 8 Using Disks 263 VMware Workstation 5 User s Manual 264 Configuring a Windows Host Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks If your host is running Windows 2000 Windows XP or Windows Server 2003 and is using dynamic disks see Do Not Use Windows 2000 Windows XP and Windows Server 2003 Dynamic Disks as Physical Disks on page 256 Configuring the Virtual Machine to Use a Physical Disk Use the following steps to run a guest operating system from a physical disk Note If you use a Windows host s IDE disk in a physical disk configuration it cannot be configured as the slave on the secondary IDE channel if the master on that channel is a CD ROM drive Identify the physical partition on which you plan to install the guest operatin

Download Pdf Manuals

Related Search

Related Contents

3 e dimanche de l`Avent    Instruction Manual Manualde usuario  FT-7800E - Yaesu.com  poignée multifonction  203RR  Eurofase 22800-015 Installation Guide  SERVICE MANUAL      

Copyright © All rights reserved. Failed to retrieve file