Home

USER MANUAL

image

Contents

1. Heating power W 500 3000 1200 4000 6000 6000 Temperature C 30 110 30 110 30 110 30 110 30 110 30 110
2. Laboratorv Equipment Manufacturer jA www mrelab com CE lsNet Ce USER MANUAL Thank you for purchasing the ultrasonic cleaner Please take the time to read these operating instructions before using and retain them for future reference Failure to follow these instructions may lead to serious personal injury and damage to property INTRODUCTION l 0O SUS304 TANK OSolution i a Ps Eed 7 oho G CAEN BBP oo Transducer Generator Detergent Tiny vibration gt Cavitation e ST Ultrasonic Cleaning Priciple Debris come off PREPARATION Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid Microscopic bubbles are formed and they implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned The bubbles are small enough to penetrate microscopic crevices cleaning them thoroughly and consistently Ultrasonic cleaning is extremely effective at removing dirt and grime which would normally require tedious manual cleaning by hand It has been used to clean a wide variety of instruments and mechanical parts such as carburetors returning them to almost like new condition without damage to delicate parts 1 Carefully unpack the cleaner and remove all traces of packing materials from it Visually inspect the cleaner for any parts that ma
3. Press the Power Button on the Generator the left indicator light will turn on 4 Ultrasonic Power Setting Ultrasonic cleaner s power can be adjusted press the left power button to reduce increase ultrasonic power 5 Time Setting Timer is 0 60minutes adjustable Press time button to reduce increase working time If need Sweep function just press the according button on the Generator after time and power setting press the button on off to start work During working you will hear the sizzling voice that means the cleaner running properly START UP HEATING FUNCTION 1 Set temperature if need Turn the Heater switch for setting temperature 30 C 110 C the indicator on the machine will turn on Please set the temperature switch to the degree that needed normally 40 60 C STOP ULTRASONIC amp HEATING PROCESS 1 Press Power button On the Generator the cleaner will stop working indicator light will turn off And then disconnect the power supply 2 Switch Heater button On the machine to stop the heating function 3 Empty the tank and clean both the outside and inside of the cleaner with clean and drv cloth for next use SPECI FI CATI ONS Model SONICA 36L SONICA 57L SONICA 90L SONICA 112L SONICA 145L SONICA 235L 590x400x400 90 1440 28 40 MRC 4 15
4. AILURE TO COMPLY MAY INVALIDATE YOUR GUARANTEE 1 DO NOT operate the unit without fluid in the tank Always ensure the fluid is no higher than the max mark Always ensure that cleaning items immersed well in the water 2 DO NOT drop any item into the tank as this may cause damage to the transducer Always place the items gently into the tank and use the basket whenever possible 3 The more items that you place in your cleaning bath the less efficient it will clean It is not advised to overlap items Always allow plenty of clear space between the items 4 Do keep the lid on during use This will prevent splashes and reduce evaporation of the fluid 5 Never immerse the machine or power cord in water or other liquid 6 DO NOT touch the power plug with wet hands especially when inserting or removing the plug 7 DO NOT touch the unit if the machine has fallen into water during operation Remove the power plug from the socket first 8 DO NOT disassemble the machine except by professionals 9 UNPLUG the power source while filling or emptying the tank 10 DO NOT spray water or liquid over the device and the control panel 11 DO NOT operate the cleaner without proper grounding 12 DO NOT place the device on a soft surface where the vents could be blocked 13 Always turn the heater off after using as leaving it on can cause the fluid to evaporate and damage the internal comp
5. onents 14 Upon completion of the cleaning cycle turn the heater knob off and isolate the machine from the electrical supply 15 Take care when adding or removing items from the cleaning tank as the fluid is likely to be hot and displaced fluid can damage the internal components Any displaced fluid must be dried up immediately 16 In the event of failure emergency disconnect the mains supply by removing the plug from the mains socket APPLI CATIONS This list is almost endless provided the product is non porous and can normallv be immersed in water anvthing can be thoroughiv cleaned Here are some examples e Engine model parts e Electrical components e Diesel injection pumps e Printer heads and toner cartridges e Motorcycle radiators e Vehicle differentials e Golf club amp grips amp golf balls e Horse bits amp stirrups amp horse brasses e Motorcycle engine crank cases e Engine cylinder heads e Bicycle derailleurs e Gun and gun components fi s an dina INDUSTRI AL ULTRASONIC CLEANER STRUCTURE Generators front panel Ultrasonic Generator Auto Frequency Contro OPERATI ON 1 Place cleaning items in the machine basket Fill stainless steel tank with solution better 2 3 of the tank cleaning items should be immersed in the solution 2 Connect lines Make sure the wires of the generator and machine are connected 3
6. y have become loose or damaged during transit Contents a Main machine b lid c Power lead d Generator e Basket 2 Place the cleaner on a flat clean surface where the cooling fans will receive adequate ventilation and ensure all controls are set to off Also ensure the drain tap is in the closed position 3 Ensure the power lead is securely plugged into the cleaner and that no part of the lead is likely to come into contact with moisture 4 Carefully fill at least 1 2 of the tank with a solvent solution For demanding cleaning we recommend suitable solution this will help increase the cleaning performance The cleaner is now readv for use A Attention a While the machine is working normally ultrasonic and tank syntony gives a well proportioned sound and no shudder on the surface of the water yet there is spray made by the tiny bubbles If there are discontinuous surges please add or release a little of washing solution in the tank stopping the surges is better for the objects cleaning SAFETY PRECAUTIONS Keep it away from children This device is not intended to use by individuals with restricted physical sensory or metal capacities or those with lack of experience or knowledge include children unless they are supervised by an individual who is responsible for their safety or have received training in operating the device PLEASE READ THE FOLLOWING VERY CAREFULLY AS F

Download Pdf Manuals

image

Related Search

Related Contents

notas del cuaderno    DELL PowerEdge T320  Samsung AWT18SBWDC User Manual    Revell 02157  Insecticide DEMAND CS  

Copyright © All rights reserved.
Failed to retrieve file