Home

netDevice and netProject - Hilscher Knowledge Base

1. _ EIFX DP DPS CIFX DP DPS lt 2 gt i E CIF104P DPS Fa E CIF30 DPS CIFLO4 DPS R CIFX DP DPS CIFX DP DPS lt 3 gt a x DP DPS poe E CIFSO DPS CIFX DP DPS CIFX DP DP 5 CIF80 DPS E CIFX DP DPS E COM C DPS le 1 Im t Fieldbus Vendor DTM Class Found DIM Slave Info Vendor Hilscher GmbH Version 2 0 32 Date 2012 11 27 Device CIFX DP DPS Info HIL_0B69 G5D Vendor Hilscher GmbH aks Version Version 1 000 4 Im H 4 Im 2 Date 2011 10 06 Figure 4 Example for netDevice and netProject Graphical Network View 2 1 1 1 Notation of the Device Description The device description is composed as follows YYYYY XXXX lt 1 gt 1 YYYYY Symbolic Name XXXX Device Description lt 1 gt Station Address 1 Network ID Figure 5 Notation of the Device Description Symbolic Name In the Symbolic Name dialog optionally a symbolic name can be entered For further information refer to section Change Symbolic Name on page 22 Device The Device Description indicates the name of the device and can not be edited Description For PROFINET IO in the device catalog under Stand Alone Slave or Slave all device instances that derive from the same device description file appear as separate devices Station Address The Station Address is the device address on the bus and can be changed in the Master DTM configuration dialog The Network ID is the network add
2. Note If a device is deleted which has additional devices assigned to the entire network is also deleted This might include Gateways with Sub networks gt Answer to the request by Yes Y The device is removed from the project configuration netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public O Hilscher 2004 2013 Working with netDevice and netProject 34 44 4 8 Working with Buslines 4 8 1 Description of the Buslines Significance of the colors for the bus lines e Root bus line The gray bus line is the root bus line All Masters are connected to this line e Master Busline or Branch Line of the Slave device These bus lines are always in the respective specific fieldbus or protocol color Colors of the Bus Line Root Bus line yellow dark fieldbus specific for AS Interface Master fieldbus specific for PROFIBUS Master fieldbus specific for CANopen Master orange fieldbus specific for DeviceNet Master yellow bottle green protocol specific for PROFINET IO Controller darkgold protocol specific for EtherNet IP Scanner protocol specific for EtherCAT Master red protocol specific for sercos Master Table 9 Colors of the Bus Lines netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 35 44 4 8 2 Add Remove Busline In the gr
3. Installing Slave DTM or adding Device Description The Device Catalog See Operating Instruction Manual of the Frame Application Insert Device in Project Network Scan Multiselection Cutting copying pasting Slave Devices depends from device See help of the device manufacturer depends from device See help of the device manufacturer depends from device See help of the device manufacturer depends from device See help of the device manufacturer 32 37 Hilscher 2004 2013 Working with netDevice and netProject 26 44 Short Description For detailed information see Page section Select and download If not yet a firmware was loaded to the device depends from device firmware In the Master DTM configuration dialog See help of the device select Settings gt Firmware Download manufacturer select the button Browse select a firmware file select the button Open select the buttons Download and Yes Assign Master device In the Master DTM configuration dialog depends from device once more with select Settings gt Device Assignment See help of the device firmware and system select Scan manufacturer chanal select the Master device with loaded and defined system channel therefore check the appropriate checkbox select Apply close the Master DTM configuration dialog via OK For repeated download this step is omitted For the Slave d
4. 3 Profibus DPVO Gateway Stand Alone Slave J Master _ Slave JE CB_AB32 DPS lf CIFLO4P DPS E CIF30 DPS CIFLO4 DPS R 5 CIFSO DPS g CIF60 DPS 8 CIF80 DPS 5 CIEX DP DPS fi COM C DPS 4 Im 7 Fieldbus Vendor DTM Class Found 1m DTH GSD Slave Info Vendor Hilscher GmbH Version 2 0 3 2 Date 2012 11 27 Device CIFX DP DPS Info HIL_0B69 G5D Vendor Hilscher GmbH Version Version 1 000 Date 2011 10 06 Figure 11 Example for netDevice Device Catalog netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 15 44 2 2 netProject Network In the netProject the actual configuration is displayed as project tree Besides the device icon the name of the device and the device address are shown For Master devices additionally a continuous number is displayed the network ID The context menu of a device is opened by a right mouse click on the device icon Here via Configuration the configuration dialog of the DIM can be accessed Via a double click on a device icon the configuration dialog of the DTM is opened if supported by the DTM In the configuration dialog then the parameter and general settings can be made Devices which are inserted in the graphical network view are also displayed in the netProject and the other way too netProject ii E Projec
5. other methods to manipulate or transfer using electronic systems without prior written consent You are not permitted to make changes to copyright notices markings trademarks or ownership declarations The included diagrams do not take the patent situation into account The company names and product descriptions included in this document may be trademarks or brands of the respective owners and may be trademarked or patented Any form of further use requires the explicit consent of the respective rights owner 1 2 2 Important Notes The user manual accompanying texts and the documentation were created for the use of the products by qualified experts however errors cannot be ruled out For this reason no guarantee can be made and neither juristic responsibility for erroneous information nor any liability can be assumed Descriptions accompanying texts and documentation included in the user manual do not present a guarantee nor any information about proper use as stipulated in the contract or a warranted feature It cannot be ruled out that the user manual the accompanying texts and the documentation do not correspond exactly to the described features standards or other data of the delivered product No warranty or guarantee regarding the correctness or accuracy of the information is assumed We reserve the right to change our products and their specification as well as related user manuals accompanying texts and documentation at all time
6. Project Debug Mode D Figure 19 netDevice Debug Toolbar Stop Project Debug Mode netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 4 Working with netDevice and netProject 4 1 Getting Started Configuration Steps 25 44 The following table describes the steps to configure a Master device as it is typical for many cases It is presupposed that the hardware installation was done The configuration for Master devices of different manufacturers may differ for some of the configuration steps of this example Short Description For detailed information see Page section Start Program Add Slave in the Device Catalog Load device catalog Create new project Create Project Configuration Scan Network Structure Enlarge Project Configuration Open the Master DTM configuration dialog Select driver Assign Master device with or without firmware Open the configuration software via Start gt Programs enter the user name and password in the dialog Add the Slaves in the Device Catalog by importing the device description files to the Device Catalog Network gt Import Device Descriptions select Network gt Device Catalog select button Reload Catalog The Device Catalog is loaded automatically when the configuration software is opened Depending of the frame app
7. Stop Communication from the context menu right mouse click dv The communication of the device at the bus is stopped netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 22 44 3 3 6 Delete With the delete function a device is removed from the project For further information see section Delete Device from Project on page 33 3 3 7 Change Symbolic Name Generally the Device Description as described under section Notation of the Device Description on page 11 is used as device name Via Symbolic Name an additional name for the devices can be set gt Right click on the device icon and select Symbolic Name The Change Symbolic Name dialog is displayed Change Symbolic Name Symbolic Name YYYYY Cancel Figure 14 Change Symbolic Name gt Enter a symbolic name The used name then is displayed in the windows netDevice and netProject as name of the device The Device Description is always displayed in squared brackets behind the symbolic name YYY YY XXXX lt 1 gt 1 YYYYY Symbolic Name XXXX Device Description lt 1 gt Station Address 1 Network ID Figure 15 Notation of the Device Description netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 23 44 3 4 Menu Network The m
8. and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Configuration 39 44 5 2 Connect disconnect Device to the device e g Diagnosis or the configuration download in the FDT Framework More information about the Download you find in section Download to Device on page 40 More information about the Upload you find in section Upload from Device on page 40 A device can be connected by marking the device in the netDevice network view and by selecting the menu Device gt Connect or via the context menu of the device and Connect lf a Master is selected and then Connect only the Master device is connected If Connect is selected in case of a marked Slave device the device is connected via the parent communication channel That means the Master is connected too Now the device is online This is displayed by a green background of the device description If the device should be disconnected from the bus the menu Device gt Disconnect or the context menu of the device has to be selected and Disconnect In case of a Master the Slaves of this network will be disconnected too That means the Master is connected to the bus automatically if a Slave is connected and the Slaves are automatically disconnected if the Master is disconnected For more information on how to connect or disconnect a DTM to the device refer to the device specific help netDev
9. and netProject Graphical Network View 11 Figure 5 Notation of the Device Description 11 Figure 6 netDevice Device Catalog Principle 12 Figure 7 Example for netDevice Network View and Device Catalog 12 Figure 8 Search Function in the Device Catalog 13 Figure 9 Search Function in the Device Catalog Search Result 13 Figure 10 netDevice Device Catalog Notations to the DTM and to the Device Principle 14 Figure 11 Example for netDevice Device Catalog 14 Figure 12 netProject Principle left side Example right side 15 Figure 13 Menu Device left Example Context Menu for Master or Slave right 17 Figure 14 Change Symbolic Name 22 Figure 15 Notation of the Device Description 22 Figure 16 Menu Network 23 Figure 17 netDevice Toolbar Network 24 Figure 18 netDevice Debug Toolbar Start Project Debug Mode 24 Figure 19 netDevice Debug Toolbar Stop Project Debug Mode 24 Figure 20 Device Catalog Sorted by Vendor Example 28 Figure 21 Device Catalog Sorted by Fieldbus Example 28 Figure 22 netDevice Import Device Description 29 Figure 23 PROFINET IO Device Instance Example Stand Alone Slave 30 Figure 24 Security Question Delete Device 33 Figure 25 Security Question Delete entire Network 33 Figure 26 Buslines 36 6 3 List of Tables Table 1 Overview 4 Table 2 Notation of the Device Description 11 Table 3 Menu Device and Context Menu 16 Table 4 Menu Device 18 Table 5 Additional Functions 21
10. devices to be added see also section Multiselection on page 37 2 Cut or copy the Slave devices via context menu Cut or Copy Via the context menu Paste paste these Slave devices at the Master bus line in the same or another network 4 In the Master DIM configuration dialog adapt the device or station address of these Slave devices device dependent also via the Master DTM context menu Additional Functions netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public O Hilscher 2004 2013 Working with netDevice and netProject 33 44 4 7 Delete Device from Project To remove a device from the project configuration gt First select the device by a mouse click gt Then press the Del button on the keyboard gt Or select Delete in the context menu of the device dv A security question appears if the device really shall be deleted Delete Device PA h E Delete this device Figure 24 Security Question Delete Device Note If a device is deleted all settings for this device get lost gt Answer to the request by Yes Y The device is removed from the project configuration If a communication channel should be deleted that has connected Slaves another security question appears Delete Device 2 The selected device is a Master with connected Slaves Do vou want to delete the entire Network Mo Figure 25 Security Question Delete entire Network
11. find a description of the entries of the menu Device and the further entries of the context menu r Connect 1 Disconnect Start Debug Mode Upload Cut Copy Paste Network Scan Via Connect a connection to the device is built up In case of a Master device only this device will be connected If the user connects a Slave device the device will be connected via the communication channel of the Master So in this case the Master is connected online too When a connection is built up in netDevice the name of the device is displayed on a green background Dead times during the connection is established are displayed yellow This depends from the system speed and is not visible permanently If a device is connected and it should be disconnected Disconnect has to be selected When a Master is disconnected the Slaves of this network get also disconnected The name of the device is displayed without green background if the device is disconnected You first must assign the device to the Master DTM configure the Master or the Slave device parameters and download the configuration to the Master Then via context menu gt Start Debug Mode the status of the cyclical communications between a Master and Slave devices can be identified based on the colors of the bus lines as well as the debug icons With the Download menu the actual configuration is loaded down into this device Hardware must be assigned to make a download
12. netProject 28 44 4 2 3 Devices of other Vendors In order to select the desired device in the device catalog note the details about the DIM and the device at the bottom of the window When sorting by Fieldbus multiple devices with identical names by different vendors can be displayed The following figure shows the device catalog sorted by Vendor Master oe CIFX ASM ve CIFX COCOM ee CIFX ON IDNM he CIFX DPIDPM we CIFX REJECM ee CIFX REJEIM oo CIFX RESPIRA we CIF RESSSM B3 COM 100KX CO COM B3 COMS 100 DN DNM A Fieldbus q Yendor a DTM Class fi DTM PROFINET 10 Controller DTM Info Yendor Hilscher GmbH Yersion v1 0022 2 1495 Date 2005 06 24 Device CIFX RE PNM Info CIF RE PNM Yendor Hilscher GmbH Yersion 1 000 Date 2005 06 24 Figure 20 Device Catalog Sorted by Vendor Example The following figure shows the device catalog sorted by Fieldbus wen CIPF A REP Tea CIF A RE PRM COMX RE PNM w COME REIFE q Fieldbus fi vendor A DTM Class E DTM Mame PROFINET 10 Controller DTM Into Adeitional info to the OT Vendor Name of the DTM vendor version LOTH version Date Cr ation date of the DM Device COMX RE PNM Into Aa info to the device Vendor Mame of fhe device Vendor version Device version Date Mendfaci ribo date of the device Figure 21 Device Catalog Sorted by Fieldbus Example For this sorting addit
13. to the device icon of the Master Download to Device select context menu Device gt Download Diagnosis Right click to the device icon of the Master depends from device select context menu Diagnosis See help of the device The Master DTM diagnosis dialog is manufacturer displayed Continue with further device diagnosis close the Master DTM diagnosis dialog via OK Disconnect Right click to the device icon of the Master Connect disconnect Device select Device gt Disconnect Table 7 Getting Started Configuration Steps netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 27 44 4 2 The Device Catalog The device catalog lists all devices for which a DIM is installed on the used PC A DTM represents one or more devices Before the devices can be used in the configuration the DTM installed on this PC needs to be loaded in the device catalog This is done automatically during the first start of the configuration software 4 2 1 Load Device Catalog Via the menu Network gt Device Catalog the device catalog is opened and information like name of the device and manufacturer for the individual DTM is displayed If anew DIM is installed the device catalog has to be reloaded to use the new devices for the configuration Further information about reloading the device catalog
14. 004 2013 Working with netDevice and netProject 32 44 4 6 Cutting copying pasting Slave Devices In the netDevice network view Slave devices in a project including all of its configuration settings can be cut or copied and then be pasted This way the project configuration can be enlarged by Slave devices the device configuration of which is identical or similar to that of Slave devices already existing in the project Via the context menu gt Cut Copy and Paste Slave devices in one or more networks can be cut or copied and pasted at a Master bus line To allow pasting the Master must support the fieldbus protocols of all Slaves If for example DPVO PROFIBUS Slaves and PROFIBUS DPV1 Slaves have been copied they can be pasted only to a Master which supports DPVO and DPV1 By this way the configuration needs to be made only once The newly added Slave devices do not need to be parameterized and configured once more Important Only devices of the same fieldbus or Real time Ethernet system can be connected in a network gt Note If Slave devices are added in a network via the context menu Cut Copy and Paste respectively the user needs to reset the device or station address for these devices in the Master configuration dialog 4 6 1 Enlarging Project Configuration To enlarge the project configuration via Cut Copy or Paste proceed as follows 1 Inthe netDevice network view in one or more networks select the Slave
15. 3 1 Debug Mode Note Depending by the software variant of the DIM the debug mode is available or not The debug mode allows to identify the status of the cyclical communication between a Master device and its Slave devices on a network based on the colors of the bus lines as well as the debug icons For the Master device or the Master bus line this is valid e Master device in operation cyclical communication runs Bus line light green e Master device not operable Bus line blue e Master in STOP state Bus line red For the Slave device or the bus line from the Master bus line to the Slave device this is valid e Slave device in operation cyclical communication to the Master device runs Bus line light green e Diagnosis message available at the Master device Bus line yo ow yellow e Slave device not found during boot up Bus line blue e Error in the Slave to Master communication Bus line red e Slave device is not configured Bus line gray For details to the debug mode refer to the Operating Instruction Manual of the Master DTM netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 20 44 3 3 2 Cut Copy Paste Via the context menu entries Cut Copy or Paste one or more Slave devices can be cut or copied in the netDevice network view at a Master bus line and then can be inserted at the sam
16. A detailed description about the Device menu and the context menu you find in section Menu Device and Context Menu on page 76 e Configuration Dialog For most of the DIM the configuration dialog of the appropriate device opens by a double click on a device icon Otherwise the context menu is opened In the configuration dialog all device and bus specific settings can be made The possibilities of the configuration are manufacturer specific Closer information for device configuration can be taken from the technical manual of the manufacturer Project Tree Network View Device Catalog Figure 3 netDevice and netProject Graphical Network View Principle The graphical network view in the netDevice window is synchronized with the netProject window That means devices which you insert e in the graphical network view are also displayed automatically in the netProject window e in the netProject window are shown in the graphical network view of the netDevice window netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 11 44 netProject a X netDevice sl EJ Project Beisp_nd_01 Ete CIFX_DP_DPM CIFX DP DPM lt 1 gt 1 EE CIFX DP DPS CIFX DP DPS lt 2 gt EE CIFX DPYDPSICIFX DP DPS lt 3 gt H E Gateway Stand Alone Slave EE CIFX DP DPS CIFX DP DPS lt 43 CIFX_DP_DPM CIFX DP DPM lt 1 gt 1 Te j Slave
17. DP 5 CIF80 DPS B CIFX DP DPS E COM C DPS 7 4 11 t Fieldbus Vendor DTM Class Found DTM GSD Slave Vendor Hilscher GmbH 20 32 Date 2012 11 27 Device CIFX DP DPS Info HIL_0869 G5D Vendor Hilscher GmbH Version Version 1 000 4a Im F Date 2011 10 06 Figure 2 Example for netDevice Network View and Device Catalog netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 10 44 2 1 1 netDevice Graphical Network View The graphical network view displays the actual project as graphical network structure Devices can be added by drag and drop from the device catalog and they are displayed as an icon in the network view For further information refer to section Insert Device in Project on page 37 or to section Arrange Elements in the Graphical Network View on page 36 e Device Symbol and Device Description Above or below the device icon the name of the device with the device address are displayed and for master devices a continuous number the network ID The position of the text depends on the direction of the connection line e Context Menu By a right mouse click on a device icon the context menu is opened The context menu contains all entries of the menu Device from the menu bar of the frame application The context menu contains further entries for configuration and diagnostic
18. T are registered trademarks of PROFIBUS International Karlsruhe sercos and sercos interface are registered trademarks of sercos international e V Suessen Germany All other mentioned trademarks are property of their respective legal owners netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 9 44 2 netDevice and netProject 2 1 netDevice netDevice Network View Device Catalog Figure 1 netDevice Network View and Device Catalog Principle The netDevice window is divided in two different areas e Graphical Network View The left side of the netDevice window shows the actual configuration as graphical network view In the graphical network view you can arrange the single elements devices and bus lines A detailed description of the network view you find in section netDevice Graphical Network View on page 70 e Device Catalog The right side of the netDevice window displays the installed devices as tree structure Further information about this you find in section netDevice Device Catalog on page 70 netDevice 4 29 POWERLINK a J Profibus DPVO CIFX_DP_DPM CIFX DP DPM lt 1 gt 1 CIFX DP DPS CIFX DP DPS lt 2 gt o MM CB_AB32 DPS g CIFLO4P DPS ro on es _ CIF30 DPS CIFLO4 DPS R CIFX DP DPS CIFX DP DPS 3 f E X DP DPS DPS lt 3 gt Mi CIFX DP DPS CIFX DP
19. Table 6 Menu Network 23 Table 7 Getting Started Configuration Steps 26 Table 8 Device Description File Types by System 29 Table 9 Colors of the Bus Lines 34 Table 10 User Levels 41 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Appendix 43 44 6 4 Glossary Master Master devices determine the data traffic on the bus A master may send messages without external request if it is in the possession of the token bus access authorization Slave Slave devices are peripheral devices like for example I O devices or drives Slave devices are also called passive participants They do not receive the bus access authorization That means they may only accept received messages from the Master or send a message to the Master after enquiry of the Master Device Instance According to the version of the PROFINET IO Slave device firmware the device instance specifies which features the device has The device instance is a module of the GSDML to describe the device parameters device specific In netDevice for PROFINET IO in the device catalog under Stand Alone Slave or Slave all device instances that derive from the same device description file appear as separate devices DTM Device Type Manager The Device Type Manager DTM is a software module with graphical user interface for the configuration or for diagnosis of device FDT Field D
20. Under Device gt Info additional information is given about the selected device instance such as the firmware version the feature set or the name of the device description file Note If a device instance appears in the device catalog twice with the same range for the firmware version you can check under Info on which state of the device description file the device instance is referenced netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 31 44 4 5 Insert Device in Project db Devices from the device catalog are added by drag and drop in the configuration area With this action a DTM Instance will be created Important Only devices with the same Fieldbus or Real time Ethernet system can be connected to the same network In order to select the desired device in the device catalog note the details about the DTM and the device at the bottom of the window When sorting by Fieldbus multiple devices with identical names by different vendors can be displayed e Insert Master To insert a Master device in a project the Master has to be selected in the depiction of the device catalog in the netDevice window Via drag and drop the device is inserted in the project The device can be inserted in both windows in the graphical network view of the netDevice and in the project tree of the netProject Thes
21. a the download to transfer the parameter data into the device When a configuration already exists in the device this configuration is overwritten by the download of the new parameter If a parameter data is already stored in the device and has to be loaded into the configuration you have to make an upload e Online Configuration Requirement for the online configuration is that the hardware is installed and can be activated by the communication DTM In case of online configuration the parameter data set in the application is transferred into the device automatically without a download If the device contains parameter data and supports the online Configuration the stored parameter data is transferred to the application without an upload from the device Note It is manufacturer specific if the used device supports an online Configuration For further information about the used device please ask the hardware manufacturer or see the help file of the device when device dialog is open Note Upload and Download are not available for each device If a device supports these functions is manufacturer specific For further information about the used device please ask the hardware manufacturer or see the help file of the device when device dialog is open More information about the Download you find in section Download to Device on page 40 More information about the Upload you find in section Upload from Device on page 40 netDevice
22. aphical network view in the netDevice window the project can be arranged and edited graphically That means buslines can be added and removed Note The changes add remove busline in the graphical network view have no effect to the real hardware configuration e Add Busline To add a busline gt Select the busline gt Select Network gt Add Busline Or gt Select in the toolbar Or gt Right click on the busline and select Add Busline Add Busline dv A busline is added on the active bus If more than one bus is selected the busline is added only at the first selected bus e Delete Last Busline To remove a busline gt Select a busline gt Select Network gt Delete Last Busline Or gt Select in the toolbar Or gt Right click on the busline and select Delete Last Busline 4dd Busline Delete Last Busline Y The lastly added busline of this bus is removed If more than one bus is selected only the busline of the first bus is deleted netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 36 44 4 8 3 Arrange Elements in the Graphical Network View A H Slave lt 2 Figure 26 Buslines Buslines and device icons can be selected and moved to arrange them in the graphical configuration To move a busline or an icon it is necessary to select it by clickin
23. art Stop Communication on page 21 In the submenu Export the actual project data like project name the fieldbus command structure and the device parameter are exported as CSV DBM or XML file Print The submenu Print contains the printing options of the DTM Table 5 Additional Functions am Depending by the software variant the context menu gt Additional Functions can contain additional or less entries as described here Further information to this is given in the help of the corresponding DTM 3 3 5 Additional Functions gt Service gt Start Stop Communication You can manually start or stop the communication between a Master and Slaves e Start Communication is enabled if the communication has been stopped before or if the configuration requires this Controlled release of communication e Stop Communication is enabled if the communication has been started To start or to stop the communication proceed as follows Start Communication 1 Connecting Device Note To start the communication of the device at the bus manually an online connection from the Master DTM to the Master device is required Further information can be found in section Connect disconnect Device on page 39 2 Select Additional Functions gt Service gt Start Communication from the context menu right mouse click gt The device communicates at the bus Stop Communication 3 Select Additional Functions gt Service gt
24. ce Tram Proleti ua Ai 33 4 8 YNOFKING WIN BUSIINES ans aneinander 34 4 8 1 DESCHOLION OF ING BUSINES nn een 34 4 8 2 AJA REMOVE BUSING lc nein 35 4 8 3 Arrange Elements in the Graphical Network View ooccccccoocccnccccooccnncnononoo 36 4 8 4 MUINISEIECHON SE 37 5 BONES AT E E ae agree Tee ET 38 5 1 Online Offlline Configura er eu cacubaud 38 5 2 Connect GISCONN ECE DEC ai 39 521 Download 10 DEVICE nares N nk ees 40 5 2 2 Upload from Device inicio nee hee a 40 6 APRENDI nee ere ret Peet bad 41 6 1 A ae er Rr epee ale re eee ee 41 6 2 LIST Ol FIQUICS nee 42 6 3 PISO TADOS ee re 42 6 4 NOS SRY aera ee ee er E 43 6 5 870 8 2 0 Ser re ee nen tne 44 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Introduction 4 44 1 Introduction 1 1 About this Manual netDevice is a FDT Container for the configuration of field devices of different manufacturers 1 1 1 Overwiew The table below gives an overview of the descriptions provided in this manual Chapter Manual Page a 31 2 Description Insert Device in Project Cutting copying pasting Slave Devices Configuration Connect disconnect Device Table 1 Overview 1 1 2 _ Online Help netDevice contains an integrated online help facility gt To open the online help select Help gt Content and Index or press the Fi key netDevice and netProject FDT Contain
25. e Master bus line or at another one l e the Slave devices can be cut or copied at a Master bus line by selecting the Slave devices and using the Cut or Copy command from the context menu Then the Slave devices can be inserted at the Master bus line by using the Paste command from the context menu The configuration for the pasted Slave devices remains maintained A detailed description for the context menu entries Cut Copy or Paste is given in section Cutting copying pasting Slave Devices on page 32 3 3 3 Network Scan The menu entry Network Scan is displayed or not depending by the device With Network Scan it is possible to find out automatically which types of Slave devices are attached to the Master device and how these devices are configured To scan the network structure proceed as follows 1 Select Network Scan from the context menu right mouse click Y A window with data of the found devices is displayed 2 Select the Create Devices bution R N Note For further information to Network Scan refer to the Operating Instruction Manual of the respective Master DTM netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 21 44 3 3 4 Additional Functions Menu Entry Meaning 9 Service In the submenu Service you can start or stop the communication Refer to section Additional Functions gt Service gt St
26. e two windows are synchronized the device is displayed in both windows It is possible to have more than one network in a project and therefore more than one Master Please note In the netDevice window the Master device has to be inserted on the Root busline green line Each inserted communication channel of the Master is displayed at least by one fixed out bound busline In the netProject window the Master needs to be inserted on the project folder directly e Insert Slave Note A Slave or Gateway device can be connected to a bus if it supports the same bus system To insert a Slave device in a project the device has to be selected in the depiction of the device catalog in the netDevice window The device is inserted into the project via drag and drop to the busline of the communication channel of the Master If in the netDevice device catalog view devices are displayed repeatedly under the same name this devices can be differentiated via their revision or the date see section Notations to the DIM and to the Device on page 14 Please note In the netProject window the Slave device must be inserted on the master icon directly Note The Master busline or the busline between the Master busline and the Slave device symbol are always displayed in the same fieldbus or protocol specific color netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2
27. enu Network includes the network depending entries e Add Busline Delete last Busline e Start Stop Project Debug Mode e Device Catalog e Import Device Descriptions e Print Project Data independent from the connected hardware it affects only the graphical view of the network created in the netDevice window It does not affect the real hardware configuration Network Extras Help C Add Busline Start Project Debug Mode Device Catalog Import Device Descriptions Print Project Data Figure 16 Menu Network Add Busline Adds a busline to the selected bus in the netDevice window A Master or a Master line must be selected Delete last Busline Deletes the last added busline A Master or a Master line must be selected Start Project Debug Via the Start Project Debug Mode Stop Project Debug Mode function the debug mode for Mode Stop Project the entire project can be started or stopped In the Project Debug Mode the status of the Debug Mode cyclical communication between the Master and Slave devices is displayed based on the colors of the bus lines as well as the debug icons Device Catalog Selecting the Device Catalog function the dialog of the device catalog opens The device catalog can be loaded or if necessary reloaded For more information about the device catalog refer to section The Device Catalog on page 27 Import Device Via the Import Device Descriptions dialog a device can be added u
28. er DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Introduction 5 44 1 1 oa List of Revisions Index ba 09 06 1 1203 x x AxSyconu ocx 1 2 6 Section Registered Trademarks updated 1 2 Section Search Function in the Device Catalog added 1 2 Section Notations to the DTM and to the Device updated 2 Section Devices of other Vendors added l Section PROFINET IO Device Instance added 1 1 4 Conventions in this Manual Notes operation instructions and results of operation steps are marked as follows Notes Important lt important note gt Note lt note gt S lt note where to find further information gt Operation Instructions 1 lt instruction gt 2 lt instruction gt or gt lt instruction gt Results Y lt result gt netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Introduction 6 44 1 2 Legal Notes 1 2 1 Copyright Hilscher 2004 2013 Hilscher Gesellschaft fur Systemautomation mbH All rights reserved The images photographs and texts in the accompanying material user manual accompanying texts documentation etc are protected by German and international copyright law as well as international trade and protection provisions You are not authorized to duplicate these in whole or in part using technical or mechanical methods printing photocopying or
29. evice Double click to the device icon of the Slave depends from device with device assignment The Slave DTM configuration dialog is See help of the device set driver settings and displayed manufacturer assign device In the Slave DTM configuration dialog select Settings Set the driver and assign the device Configure Slave device Configure the Slave device depends from device Double click to the device icon of the Slave See help of the device The Slave DTM configuration dialog is manufacturer displayed In the Slave DTM configuration dialog configure the Slave device close the Slave DTM configuration dialog via OK Configure Master device Configure the Master device depends from device Double click to the device icon of the Master See helo of the device The Master DTM configuration dialog is manufacturer displayed In the Master DTM configuration dialog configure the Master device close the Master DTM configuration dialog via OK Arrange Project The project can be arranged in the graphical Arrange Elements in the network view by use of the mouse Graphical Network View Save project select File gt Save See Operating Instruction or Manual of the Frame select File gt Save As Application Connect Master device Right click to the device icon of the Master Connect disconnect Device select context menu entry Device gt Connect Download Configuration Right click
30. evice Tool FDT specifies an interface in order to be able to use DIM Device Type Manager in different applications of different manufacturers netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Appendix 6 5 Contacts Headquarters Germany Hilscher Gesellschaft fur Systemautomation mbH Rheinstrasse 15 65795 Hattersheim Phone 49 0 6190 9907 0 Fax 49 0 6190 9907 50 E Mail info hilscher com Support Phone 49 0 6190 9907 99 E Mail de support hilscher com Subsidiaries China Hilscher Systemautomation Shanghai Co Ltd 200010 Shanghai Phone 86 0 21 6355 5161 E Mail info hilscher cn Support Phone 86 0 21 6355 5161 E Mail cn support hilscher com France Hilscher France S a r l 69500 Bron Phone 33 0 4 72 37 98 40 E Mail info hilscher fr Support Phone 33 0 4 72 37 98 40 E Mail fr support hilscher com India Hilscher India Pvt Ltd New Delhi 110 065 Phone 91 11 26915430 E Mail info hilscher in Italy Hilscher Italia S r l 20090 Vimodrone MI Phone 39 02 25007068 E Mail info hilscher it Support Phone 39 02 25007068 E Mail it support hilscher com netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public 44 44 Japan Hilscher Japan KK Tokyo 160 0022 Phone 81 0 3 5362 0521 E Mail info hilscher jp Su
31. f type list the bus system for which you intend to import device description files Select the path for the device description file Possibly select the path for the device icon Reload the device catalog see section Reload Device Catalog on page 27 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 30 44 4 4 PROFINET lO Device Instance For PROFINET lO Stand Alone Slave Device and Slave Generic Device in the device catalog all device instances of one device description file appear as separate devices To distinguish the device instances Originating from the same device description file the device name is followed by the firmware version or the range of the firmware versions the device instance is valid for as shown in the following figure netDevice PROFIBUS MPI PROFINET 10 J Gateway Stand Alone Slave Master Slave E e CIFX RE PNS a CIFX RE PNS E de CIFX a 1 111 4 138 13 4 Ix z 19 z Ax DTM Info Vendor Hilscher GmbH Version 1 0009 2 7715 Date 2011 02 02 PROFINET 10 Generic Device DTM Firmware version 3 4 19 V3 4 x Supports FastStartup Identification amp Maintenance 1 4 RT and IRT Communication 0x0000 1101 DIM 3 GSDML v2 3HILSCHER CIPX Figure 23 PROFINET IO Device Instance Example Stand Alone Slave
32. g on it A selected busline or device is displayed with a blue colored frame around the icon e Move Device Icon Each device icon in the project can be moved by clicking and holding the left mouse button The fixed buslines move with the icons and the built configuration persists Another possibility to move the selected device icons consists in using the cursor keys If the SHIFT key is pressed the icons are moved faster e Move Buslines Busline A is the Root Busline and it can be positioned by holding the mouse button Busline B is the Branch Line of the Master device and can not be moved If the Master Icon is moved the busline moves with this icon automatically Busline C is the basic line of the Fieldbus or the Real time Ethernet system Master bus line inherently It also can not be moved singly but it is moved with the device icons automatically Busline D and E are variable added buslines part of the Master bus line of the Fieldbus They can be selected and moved or resized Busline F is the branch line of the Slave device bus line between the Master bus line and the Slave device icon It is the connection line from the Slave to the bus This line is moved automatically like busline B with the device icon This line can not be moved independently netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netPro
33. he design construction maintenance or operation of nuclear facilities e in air traffic control systems air traffic or air traffic Communication systems e in life support systems e in systems in which failures in the software could lead to personal injury or injuries leading to death We inform you that the software was not developed for use in dangerous environments requiring fail proof control mechanisms Use of the software in such an environment occurs at your own risk No liability is assumed for damages or losses due to unauthorized use 1 2 4 Warranty Although the hardware and software was developed with utmost care and tested intensively Hilscher Gesellschaft fur Systemautomation mbH does not guarantee its suitability for any purpose not confirmed in writing lt cannot be guaranteed that the hardware and software will meet your requirements that the use of the software operates without interruption and that the software is free of errors No guarantee is made regarding infringements violations of patents rights of ownership or the freedom from interference by third parties No additional guarantees or assurances are made regarding marketability freedom of defect of title integration or usability for certain purposes unless they are required in accordance with the law and cannot be limited Warranty claims are limited to the right to claim rectification netDevice and netProject FDT Container DOC0404010111EN Revisio
34. hilscner COMPETENCE IN COMMUNICATION Operating Instruction Manual netDevice and netProject FDT Container netbe vice LJ CompoNlet Sy EtherCAT J Etherblet 1P a EB Modbus RTU H E Open Modbus TCP 3 EY POWERLINK H E Profibus DPWO J E Profibus DPV1 Ey PROFIBUS MPI Master Device lt 1 gt 71 Slave gt 239 PROFINET 10 Network View H E SERCOS IM a VARAN A Fieldbus il vendor A DTM Class i Hilscher Gesellschaft fur Systemautomation mbH www hilscher com DOC0404010111EN Revision 11 English 2013 09 Released Public Table of Contents 2 44 Table of Contents 1 INTRODUCTION asar AAA ii aabt 4 1 1 ADOULMIS Manuals ad adas 4 1 1 1 OVEIWIEW ados 4 1 1 2 A ea a ie 4 1 1 3 LISEOFREVISIONS dE eee 5 1 1 4 CONVENTIONS Minis Manual mida dada 5 1 2 LEGAL A O 6 1 2 1 So o ee e NE 6 1 22 Important Noli A N 6 1 2 3 EXCIUSION Ot Lab E 7 1 2 4 Warrants 7 1 2 5 EX DOM AC GUIATOMNS andara 8 1 2 6 Registered Trade marrks ccccccccsssssccccceesececcceeseeeeessaueeeeeseeaeeesesseeecessesaneeeessaas 8 2 NETDEVIGEAND NE TIPAOQUEG I Sasse 9 2 1 PSG a ee ened aaa ct nat ae a E 9 2 1 1 netDevice Graphical Network VieW ooccccccconcccncccconccononononncononnnnnconnnononnconnnos 10 2 1 2 netDevice Device Catalogi a a 12 2 2 MET FOJECT NEIWWOK ei 15 3 WORKING WITH THE MENO Som 16 3 1 TRE MeAIB A Zeus ee ee 16 3 2 Menu Device and Context Mental 16 3 3 On
35. ice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Configuration 40 44 5 2 1 Download to Device Note It is manufacturer depending if the device supports the Download function Look up in the manufacturer specific manual for further information If a device is parameterized offline in the DIM application program a download to the device has to be made to transfer the configuration with the parameter data to the device The download is made via the menu Device gt Download or via the context menu of the device and then Download Now the actual configuration in the application program is loaded down into the device netDevice Message Download If the download is started as long as the Slave devices are connected to the Master device the following message is displayed If you attempt to download during bus operation communication between master and Slaves is stopped Do you really want to download Important If the communication between the Master and the Slave devices is stopped the data exchange between the Master device and the Slave devices is stopped gt Click to Yes if you intend to download the configuration otherwise click to No 5 2 2 Upload from Device Note It is manufacturer depending if the device supports the Upload function Look up in the manufacturer specific manual for further information If a device contain
36. ional DIMs of other vendors can be displayed netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and netProject 29 44 4 3 Installing Slave DTM or adding Device Description In order to insert further Slave devices to the device catalog 1 First check if the Slave manufacturer provides a DTM 2 Install this DTM Alternatively or if no DIM for the Slave is available use the device description file of the device specified by the manufacturer Reatine Einamat EbeGAT DOF xm rien fes ets Fieldbus AS era EEE CANopen feos feds Deuicener eos fes Table 8 Device Description File Types by System 1 Select Network gt Import Device Descriptions dv The file selection dialog Import Device Description opens netDevice Import Device Description Look in gt DeyviceD escrption ao fe E Device Description File SS0 My Recent Documents Desktop My Documents My Computer gt My Network File name A Los Places k PROFIBUS GSD gs ged que gst Cancel PROFINET GSOML ml A5 Interface EDS eds SERCOS III SODML xml DeviceNet EDS eds EtherNet IP EDS eds CANopen EDS eds Files of type PROFIBUS GSD as ale a 3 er A Figure 22 netDevice Import Device Description 2 Select in the File o
37. ject 37 44 4 8 4 Multiselection Multiselection makes it possible to select more than one device and or busline This is helpful if more than one element should be arranged at the same time Two possibilities are available for multiselection e Only with the Mouse gt Click in the configuration window gt Hold the mouse button and draw a frame around the elements you want to select e With Mouse and the SHIFT Key gt Select the first element with a left mouse click busline or device icon gt Hold the SHIFT key on the keyboard and click on the next elements you want to select gt Note Only buslines which can be changed manually can be selected Descriptions of the single buslines you find in section Arrange Elements in the Graphical Network View on page 36 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public O Hilscher 2004 2013 Configuration 38 44 5 Configuration 5 1 Online Offline Configuration The configuration of a device is done in the DTM configuration dialog of the device This one can be opened via double click to the device in the netDevice network view via the context menu Configuration or via Device gt Configuration A distinction is made between offline configuration and online configuration e Offline Configuration If a device is parameterized offline in the application the configuration has to be loaded into the device vi
38. lication For the configuration software select File gt New or File gt Open Insert Master or Slave into configuration In the Device Catalog click to the Master and insert the device via drag and drop to the line in the network view in the Device Catalog click to the Slave and insert the device via drag and drop to the Master bus line in the network view Alternatively scan the network structure Create the project configuration via context menu Additional Functions gt Network Scan Download the configuration to the Master device If necessary enlarge project configuration Therefore select Slave devices for enlargement Select context menu Cut and or Copy Add Slave devices via context menu Paste Adapt Slave device address in the Master DTM configuration dialog Open the Master DTM configuration dialog Double click to the device icon of the Master The Master DTM configuration dialog is displayed In the Master DTM configuration dialog select Settings gt Driver select a driver if necessary configure the driver settings Assign the device to this driver In the Master DTM configuration dialog select Settings gt Device Assignment select a Master device select the button Apply netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public See Operating Instruction Manual of the Frame Application
39. line Functions via the Context Menu uuueeseessnsnensnnnnnsnnnnennnnnnnnnnnennnnnensnnnenenenn 19 3 3 1 DEBUG Moden ed 19 3 3 2 Cut GODV P AS te au ne u 20 3 3 3 NetWork SC IRRE 20 3 3 4 Additional FUNCIONS 1 ER 21 3 3 5 Additional Functions gt Service gt Start Stop Communication cccceeee 21 3 3 6 A A 22 3 3 7 Change Symbolic NaMe cccccoccccnccnnnccccccconnccnnnncnononnonnnnnnnnnonnnnnnnnnnnnnnnnnnnnennnnonnss 22 3 4 VIENULNETIWOLK eek 23 3 4 1 netDevice Network Toolbar macraei e N a e 24 3 4 2 netDevice Debug Tod tii ne 24 4 WORKING WITH NETDEVICE AND NETPROJECT ooccocccncccnccncccncccocccocccocccncccanona o 25 4 1 Getting Started Configuration StepS cccccccocccnccconcnnccnononnnononnnnnonennnnnnnannnnnonanennns 25 4 2 Tine Device Catala id 27 4 2 1 Load Device Bald 0 ana eek eet ene ee eta ae 27 4 2 2 Reload Device Galalod ii a te 27 4 2 3 Devices oh other Vendors ii O 28 4 3 Installing Slave DTM or adding Device Description oocccccoooncnccccnccnnncnnconnnnnaninnnnnos 29 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Table of Contents 3 44 4 4 PROFINE TO DevicS IMSta nC ss 30 4 5 Sert DEVICE IN PTO Sita nia 31 4 6 Cutting copying pasting Slave DeviceS ccooonnccccconnconocconcnnononccnnononnnnnnnnnnnncnnanennnos 32 4 6 1 Enlarging Project Contigua isis os 32 4 7 Delete Devi
40. n 11 English 2013 09 Released Public Hilscher 2004 2013 Introduction 8 44 1 2 5 Export Regulations The delivered product including the technical data is subject to export or import laws as well as the associated regulations of different counters in particular those of Germany and the USA The software may not be exported to countries where this is prohibited by the United States Export Administration Act and its additional provisions You are obligated to comply with the regulations at your personal responsibility We wish to inform you that you may require permission from state authorities to export re export or import the product 1 2 6 Registered Trademarks Windows XP Windows Vista Windows 7 and Windows 8 are registered trademarks of Microsoft Corporation CANopen is a registered trademark of CAN in AUTOMATION International Users and Manufacturers Group e V CiA Nurnberg CC Link is a registered trademark of Mitsubishi Electric Corporation Tokyo Japan CompoNet DeviceNet and EtherNet IP are trademarks of ODVA Open DeviceNet Vendor Association Inc EtherCAT is a registered trademark and a patented technology of Beckhoff Automation GmbH Verl Germany formerly Elektro Beckhoff GmbH Modbus is a registered trademark of Schneider Electric POWERLINK is a registered trademark of B amp R Bernecker Rainer Industrie Elektronik Ges m b H Eggelsberg Austria PROFIBUS und PROFINE
41. n in the Device Catalog Search Result netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 2 1 2 2 Notations to the DTM and to the Device 14 44 In the lower part of the device catalog window appears detailed information about the selected device and DIM This includs the DIM Name the Device Name as well as information about the Vendor the Version and the Date This information will help you to distinguish Master devices of different manufacturers that appear in the device catalog under the same name based on their hardware revision or in reference to the date of manufacture Under Info information such as firmware version the feature set or the device description file name appears you will need for the PROFINET lO Stand Alone Slave Device and Slave Generic Device to select the device instance Device Catalog Window upper part with tree structure lower part with notations to the DTM and to the device DTM DTM Name Info Additional Info to the DTM Vendor Name of the DTM vendor Version DTM version Date Creation date of the DTM Device Device Namee Info Additional Info to the Device Vendor Name of the device vendor Version Device version Date Manufacturing date of the device Figure 10 netDevice Device Catalog Notations to the DTM and to the Device Principle POWERLINE
42. of the configuration Selecting Upload a configuration stored in this device is loaded in the DTM For this menu it is necessary that a configuration is stored in the device and this function in the DTM A connection to the device is needed to make an upload Via Cut Copy Paste in the netDevice network view one or multiple Slave devices can be cut or copied at the Master bus line and pasted at this or at an other Master bus line The Slave device configuration remains maintained and further configuration is not required Via Network Scan the actual bus configuration is read back from the Slave devices If e g the master is configured at first without a Slave Slaves already available at the bus then can be inserted in the project via Network Scan netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 18 44 Menu Meaning Configuration Via Configuration the device parameters of the actual device are displayed The device parameters are manufacturer specific and cannot be specified here Also the view of the menu can vary depending by the DTM For further details about the device parameters of the used device refer to the manufacturer documentation Measured Value Via Measured Value the measurement values of the device are shown if supported by the DTM For further details about Measured Value refer to the manufact
43. ontains the entries Right mouse click Cut Copy Paste enabled only for Slave devices Additional Functions Delete and Symbolic on the device icon Name and for Master devices Start Debug Mode and Network Scan Further descriptions about this you find in section Online Functions via the Context Menu on page 19 The context menu can contain additional manufacturer specific entries They are not specified here Table 3 Menu Device and Context Menu For further information to the configuration and diagnosis possibilities of a y certain device open the device specific help file To open the help file select Help in the DIM dialog or press the F1 key or refer to the manual of the installed DIM netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 17 44 Device Network Extras Connect Connect Connect Start Debug Mode Download Download Upload Upload Configuration Cut Copy Network Scan Configuration Configuration enw Device Additional Functions Additional Functions Delete Delete Symbolic Mame Symbolic Name Context Menu Slave Context Menu Master Figure 13 Menu Device left Example Context Menu for Master or Slave right Note The context menu can have additional or less entries as described here depending by software variant In the following table you
44. pport Phone 81 0 3 5362 0521 E Mail jp support hilscher com Korea Hilscher Korea Inc Seongnam Gyeonggi 463 400 Phone 82 0 31 789 3715 E Mail info hilscher kr Switzerland Hilscher Swiss GmbH 4500 Solothurn Phone 41 0 32 623 6633 E Mail info hilscher ch Support Phone 49 0 6190 9907 99 E Mail ch support hilscher com USA Hilscher North America Inc Lisle IL 60532 Phone 1 630 505 5301 E Mail info hilscher us Support Phone 1 630 505 5301 E Mail us support hilscher com Hilscher 2004 2013
45. ress of the Master and it is provided automatically when inserting the device The network ID is static and cannot be changed For Slaves no network ID appears Table 2 Notation of the Device Description netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 netDevice and netProject 12 44 2 1 2 netDevice Device Catalog The device catalog displays a list of devices of all DTM installed on this PC If the device catalog is loaded it is shown as tree structure in the netDevice window netDevice Network View Device Catalog Figure 6 netDevice Device Catalog Principle netDevice POWERLINK _ Profibus DPVO H E Gateway Stand Alone Slave Master _ Slave m CIFX_DP_DPM CIFX DP DPM lt 1 gt 1 4 CIFX DP DPS CIFX DP DPS lt 2 gt i CIFLO4P DPS fi CIF30 DPS CIFLO4 DPS R 3 CIF50 DPS BB CIF60 DPS ER CIF80 DPS HER CIFX DP DPS EE COM C DPS a Pu CIFA DP DPS CIFX DP DPS lt 3 gt CIFX DP DPS CIFX DP DP al mI b Fieldbus Vendor 5 DTM Class Found DIM GSD Slave Info Vendor Hilscher GmbH Version 20 502 Date 2012 11 27 Device CIFX DP DPS Info HIL_0669 GSD Vendor Hilscher GmbH Version Version 1 000 Date 2011 10 06 Figure 7 Example for netDevice Network View and Device Catalog Selecting a register card the device
46. s and without advance notice without obligation to report the change Changes will be included in future manuals and do not constitute any obligations There is no entitlement to revisions of delivered documents The manual delivered with the product applies Hilscher Gesellschaft fur Systemautomation mbH is not liable under any circumstances for direct indirect incidental or follow on damage or loss of earnings resulting from the use of the information contained in this publication netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Introduction 7 44 1 2 3 Exclusion of Liability The software was produced and tested with utmost care by Hilscher Gesellschaft fur Systemautomation mbH and is made available as is No warranty can be assumed for the performance and flawlessness of the software for all usage conditions and cases and for the results produced when utilized by the user Liability for any damages that may result from the use of the hardware or software or related documents is limited to cases of intent or grossly negligent violation of significant contractual obligations Indemnity claims for the violation of significant contractual obligations are limited to damages that are foreseeable and typical for this type of contract It is strictly prohibited to use the software in the following areas e for military purposes or in weapon systems e for t
47. s are arranged by different criteria e g by Vendor Fieldbus or DTM Class Further information about working with the device catalog you find in section The Device Catalog on page 27 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public O Hilscher 2004 2013 netDevice and netProject 13 44 2 1 2 1 Search Function in the Device Catalog Using the search function in the device catalog you can search for devices You can search by device name or any combination of characters Note Do not use wildecards gt Select the Found tab PS Fe lt Please enter your search text and press Return key gt 4 gt Fieldbus Vendor DTM Class Found Figure 8 Search Function in the Device Catalog gt Enter the search text in the search window for example COMX gt Press Return All devices that contain the code COMX in the name are displayed MX ii COMX 100XX CO COM i 85 COMX LOOXX CO COS COMX 100XX CO COS eds EE COMX 100XX CO COS COMX 100XX CO COS eds 2 COMX 100XX DN DNM 23 COMX 100XX DN DNS COMX_100XX DN_DNS EDS 2 COMX 100XX DN DNS COMX_100XX DN_DNS EDS 9 COMX 100XX DP DPM di COMX 100XX DP DPS EE COMX 100XX DP DPS 2 COMX 100XX DP MPI 2 COMX 100XX RE ECM u 2 COMX 100XX RE ECS V0 2 EE COMX 100XX RE ECS V1 2 r 4 IM t MLAS Fieldbus A Vendor N DTM Class 4 Found y m Figure 9 Search Functio
48. s parameter data and this parameter data should be loaded into the DIM application program an upload from the device has to be made Then you have to select the menu Device gt Upload to make an Upload from the device The actual configuration in the device is loaded into the application program netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Appendix 41 44 6 Appendix 6 1 User Rights Apart from the administrator which has full rights of access there are four further user levels which have different rights of access in each case for parameterization and configuration Observer Operator Maintenance Planning Engineer Menu Device and Context Menu Measured vave Yes ves ves es simios ves ves fies es Diagnostic Menu Network Remove last Busline last Busline Start Project Debug Mode Stop Project Debug ER Device Device Catalog Import Device ee Print Print Project Data Data Table 10 User Levels netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Appendix 42 44 6 2 List of Figures Figure 1 netDevice Network View and Device Catalog Principle 9 Figure 2 Example for netDevice Network View and Device Catalog 9 Figure 3 netDevice and netProject Graphical Network View Principle 10 Figure 4 Example for netDevice
49. sing a device Descriptions description file For more information refer to section Installing Slave DTM or adding Device Description on page 29 Print Project Data With the function Print Project Data the actual project data like project name the fieldbus command structure and the device parameters are printed out Table 6 Menu Network netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 24 44 3 4 1 netDevice Network Toolbar The network toolbar is faded in and faded out via View gt Device This toolbar contains the entries from the left to the right e Network gt Add busline e Network gt Delete Last busline and e Network gt Device Catalog Figure 17 netDevice Toolbar Network gt Note The Network toolbar is enabled if the focus is put on the netDevice or netProject window 3 4 2 netDevice Debug Toolbar gt Note The menu entries for the debug mode are only available if the debug mode is supported by the frame application Also if Start Project Debug Mode is enabled possibly some or all Master DTM in the project do not support the debug mode The debug toolbar is faded in and faded out via View gt Debug This toolbar contains the entries from the left to the right e Debug gt Start Project Debug Mode e Debug gt Stop Project Debug Mode EA Figure 18 netDevice Debug Toolbar Start
50. t Beisp_nd_01 Ode CIFX_DP_DPM CIFX DP DPM lt 1 gt 1 JE CIFX DP DPS CIFX DP DPS lt 2 gt 8 CIFX DP DPS CIFX DP DP5 lt 3 gt Project Tree Figure 12 netProject Principle left side Example right side The actual selection in the netProject window is synchronized with the graphical network view More about multiselection you find in section on page 37 netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 16 44 3 Working with the Menus 3 1 The Menu Bar The both menus Device and Network are displayed in the menu bar of the frame application if one of the windows netProject or netDevice is activated The menu Network is a dynamic menu 3 2 Menu Device and Context Menu The menu Device can be selected via the menu bar of the frame application The context menu can be opened via right click on the device icon in the netDevice network view Both menus contain several entries in common Entries which are greyed out are disabled for the selected device Possibly some entries are not supported by the device Menu Device The menu Device in the menu bar of the frame application includes the entries Connect Disconnect Download Upload Configuration Measured Value Simulation and Diagnostic only Master and or Gateway Stand Alone Slaves Context menu Additionally to the entries in the menu Device the context menu c
51. urer documentation Via Simulation an offline simulation for this device is displayed when supported by the DTM For further details about the simulation refer to the manufacturer documentation Diagnostics With the Diagnostics menu the Diagnostic functions for this device are shown if supported by the DTM The diagnostic functions are manufacturer specific For further details about the device diagnosis refer to the manufacturer documentation Additional For information to Additional Functions refer to section Online Functions via the Context Menu Functions on page 19 Delete Delete removes the selected device Symbolic Name Here an arbitrary name can be assigned to the device This name is displayed in netDevice and netProject as the first part of the device description Table 4 Menu Device 4 Note The entries Connect Disconnect Start Debug Mode Download Upload and Cut Copy Paste are selectable for many devices If these functions are supported by the selected device can only be seen after activating this menu If they are not supported an error will be reported netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with the Menus 19 44 3 3 Online Functions via the Context Menu The context menu of the device contains all entries of the Device menu in the menu bar Additionally there are further entries in the context menu 3
52. you find in section Reload Device Catalog on page 27 If the Device Catalog is loaded the installed devices are displayed in the device catalog depiction of the netDevice window The devices can be inserted in the project via drag and drop from the device catalog depiction in the netDevice window A detailed description about the device catalog depiction in the netDevice window you find in section netDevice Device Catalog on page 12 4 2 2 Reload Device Catalog lf new DTM are installed on the PC or device descriptions are imported the device catalog must be reloaded to use the new devices in the configuration Via the menu Network gt Device Catalog the device catalog opens and selecting the Reload button it is searched for installed DTM on the PC Note In order to reload the device catalog the the current user must have administrative rights Otherwise the Reload button is grayed out and the device catalog cannot be loaded The DTM are started and some information like device name bus system manufacturer and device type are read in when loading the device catalog With this information the configuration software creates the device catalog The tree structure shows the actual installed devices Now the devices can be inserted in the project and configured there netDevice and netProject FDT Container DOC0404010111EN Revision 11 English 2013 09 Released Public Hilscher 2004 2013 Working with netDevice and

netDevice and netProject - Hilscher Knowledge Base

Contents

Download Pdf Manuals

Related Search

Related Contents