EL-400RGY
Contents
1. Authorized person Supervisory board Ms Rhea Gossel place of business 8274 Tagerwilen SWITZERLAND company number CH 440 3 020 548 6 Commercial Registry Kanton Thurgau www laserworld com info laserworld com representative according to EMVG Cleantech Europe GmbH Managing Director Thomas Schulze Furkhofstr 5 81927 Munchen DE2. EL 400RGY USER MANUAL Please read this manual carefully before use USER MANUAL Laserworld Ecoline EL 400RGY I Table of contents 1 SAFETY INSTRUCTIONS 2 OPERATING DETERMINATIONS 3 AUTO MUSIC MODE 4 OPERATION WITH DMX 5 DMX CHANNELS 6 MAINTENANCE 7 TECHNICAL SPECIFICATIONS Checking Parts Please check if the following parts are included 1 x EL 400 RGY Laser 1 x Power cable 1 x User manual Page 2 of 8 Page USER MANUAL Laserworld Ecoline EL 400RGY Page 3 of 8 DANGER LASER RADIATION Avoid direct eye exposure Laser radiation can cause eye damage and or skin damage All protective measures for a safe operation of this laser must be applied 1 SAFETY INSTRUCTIONS If the device has been exposed to drastic temperature fluctuation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature 1 The laser must only be used for shows The operation is only allowed if it is controlled by a skilled and well trained operator Never leave this device running unattended and keep it away from children and unauthorized persons 2 Keep away from heaters and other heating sources In order to safeguard sufficient ventilation leave 50 cm of free space around the device 3 Never direct the laser beam to people or animals 4 CAUTION LASER DIODE Never unscrew the housing There are no ser
3. example vertical movement 0 pattern is centered 1 127 pattern is shifted up down 1 top 127 bottom 128 255 pattern moves up and down with increasing speed Please note that according to the pattern not all effect channels are activated E g you can t move dynamic patterns etc USER MANUAL Laserworld Ecoline EL 400RGY Page 7 of 8 6 MAINTENANCE Maintenance should be perfomed ervery 15 day period by using a sponge wich is dipped with alcohol rather than wet cloth or other chemical liquid to clean the mirror Always disconnect from the mains when the device is not in use or before cleaning it There are no serviceable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers Never look directly into the light source Always disconnect from the mains when the device is not in use or before cleaning it 7 TECHNICAL SPECIFICATIONS Power supply AC 220V 240V 50 60 Hz DMX 512 10 channels Ambient temperature 10 C 35 C Power consumption 40 W Working mode automatic music active DMX512 Optical power green ca 100mW 532nm red ca 300mW 650nm Laser classification 3b Weight 5 kg Dimensions 285 x 160 x 230 mm PLEASE NOTE This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a Safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes
4. ns electric shock etc USER MANUAL Laserworld Ecoline EL 400RGY Page 5 of 8 3 AUTO MUSIC MODE If you put switch 10 to ON the patterns will change triggered by sound sound or music mode You can control the music sensitivity of the microphone with the min max knob on the rear panel 4 OPERATION WITH DMX If you turn switch 10 to OFF the device is in DMX mode Set the DMX address and connect the device to a DMX controller you can then operate your EL 350 RGY by DMX Set the DMX address code with the binary system 0 or 1 Examples DMX DMX adress adress 1 The device has 10 operate channels so if you set the first on DMX address 1 The second should be DMX address 11 and so on USER MANUAL Laserworld Ecoline EL 400RGY Page 6 of 8 5 DMX CHANNELS The DMX channels are set as following Mode 0 69 laser off 70 209 sound mode see above 210 255 DMX mode channel Pate 3 fect channel Stabe fect channel Point speed 5 Horizontal movement Serica movement OT Zoom Colour 1 39 yellow 40 79 red 80 119 green 120 159 original pattern 160 199 colours of the pattern are changed Reset above 200 shortly Colour effect channel 1 79 draw increasing part of the pattern 80 119 the same automaticallywith increasing speed 120 255 change colours these channels are divided in three parts 0 no effect 0 3 with zoom 1 127 static value 128 255 dynamic For
5. viceable parts inside the device Maintenance and service operations shall only be carried out by authorized dealers 5 Always disconnect from the mains when the device is not in use or before cleaning it HEALTH HAZARD Never look directly into the light source as sensitive persons may suffer an epileptic shock USER MANUAL Laserworld Ecoline EL 400RGY Page 4 of 8 2 OPERATING DETERMINATIONS 6 The operator has to make sure that laser radiation also reflected laser radiation higher than the highest allowed level is avoided by technical or organisational measures 7 Make sure that the used voltage is AC 220V 240V 50 60Hz 8 If the device is used in a flying installation the mounting brackets and an appropriate safety rope must be fixed 9 Laser effects are not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects 10 In some countries the operator must notify the accidence insurance and the authority for industrial safety before operating a laser For more information contact the relevant authorities 11 Please consider that unauthorized modifications on the device are forbidden due to safety reasons 12 If this device will be operated in any way differently than described in this manual the product may suffer damages and the guarantee becomes void Furthermore any other operation may lead to dangers like short circuit bur
6. written in this user manual Laserworld cannot be made liable for damages caused by incorrect installations and unskilled operation USER MANUAL Laserworld Ecoline EL 400RGY Page 8 of 8 EU Declaration of Conformity 4 We hereby confirm that the following device Laserworld Ecoline EL 400RGY complies with the essential safety requirements laid down in the regulations of the committee to assimilate the provisions of law of all participating EU states on the electromagnetic compatibility 98 336 EWG The device has been classified considering the following EU norms on electromagnetic compatibility DIN EN 55103 1 1996 DIN EN 55103 2 1996 DIN EN 61000 3 2 2000 A2 2005 DIN EN 61000 3 3 1995 A1 2001 Assessment of compliance of the product with the requirements relating to the Low Voltage Directive LVD was based on the following standards DIN EN 60065 2002 Furthermore the device is verified in correspondence to the laser class regulations DIN EN 60825 1 if properly set up according to the upper mentioned laser safety regulation After installing the device an inspection and official approval is indispensable for the overall setup The inspection must follow the european guidelines EN 60825 1 and corresponding regulations for the prevention of accidents BGV B2 This declaration is executed on behalf of the EL 400RGY DMX Laser manufacturer Laserworld Switzerland AG Oberstrasse 1 8274 Tagerwilen SWITZERLAND
Download Pdf Manuals
Related Search
EL 400RGY el 400 y su familia el 400 precursor