Manual - KVM Switch Direct
Contents
1. 1 Video Ports The cables that connect to the computer video ports plug in here There are eight video ports distributed around the VS 881 s circumference 2002 12 13 Port LEDs A LED lights ORANGE to indicate the computer connected to to its corresponding port is Online The LED changes to GREEN to indicate the computer connected to to its corresponding port is the one that is currently selected The LED goes out when the computer connected to to its corresponding port is in Standby mode Port Down Switch Press this button to switch the video focus to the computer previous to the current one VGA Display On Off Powers the unit s VGA display ON and OFF Port Up Switch Press this button to switch the video focus to the computer subsequent to the current one 2002 12 13 IR REMOTE GONTROL UNIT Port Down Port Selection 1 VGA Display ON OFF Powers the unit s VGA display ON and OFF 2 Port Up Port Down These buttons function in a similar manner to the Port Up Port Down buttons on the main unit Press these buttons to switch the video focus to the NEXTor PREVIOUS computer on the installation 3 Port Selection The numbers correspond to the video ports on the main unit Press a button 1 to 8 to switch the video focus to the computer connected to to its corresponding port Note The VS 881 s remote control handse2. USER MANUAL vS 381 Read this guide thoroughly and follow the installation and operation proce dures carefully in order to prevent any damage to the units and or any de vices that connect to them This package contains 8 Port Video Switch Infrared Remote Control Handset Infrared Receiver with 1 8m attached cable Video Cable 1 2m Power Adapter User Manual Quick Start Guide Copyright 2000 ATEN International Co Ltd CE Manual Part No PAPE 1213 100 Printed in Taiwan 12 2002 re ee ee EE Er All brand names and trademarks are the registered property of their respective owners 2002 12 13 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the followin
3. 2002 12 13 LIMITED WARRANTY IN NO EVENT SHALL THE DIRECT VENDOR S LIABILITY FOR DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT The direct vendor makes no warranty or representation expressed implied or statutory with respect to the contents or use of this documentation and especially disclaims its quality performance merchantability or fitness for any particular purpose The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions or update For further inquiries please contact your direct vendor 2002 12 13 Notes 14 2002 12 13
4. g measures Reorient or relocate the receiving antenna Increase the separation between the equipment and reciever Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio television technician for help 2002 12 13 OVERVIEW The VS 881 Video Switch is a modern control unit that allows you to conveniently display the video output of eight separate computer systems on a single monitor or via a multimedia projector thereby eliminating the unnecessary expense of purchasing a separate monitor for each computer The VS 881 is perfect for corporate presentations company briefings and institutional learning centers The VS 881 improves on previous video switch models with enhanced features that include a freely accessible concentric hub design easy computer selection via push buttons intelligent infrared IR remote control and electronic switching technology rather than mechanical switching for reliability and durability The VS 881 also saves on the space that additional monitors take up as well as the extra power costs and eliminates the inconvenience and wasted effort involved in constantly moving around from one computer to another 2002 12 13 FEATURES Displays the video output of eight separate computers on a single monitor or projector New modern concentric design with logica
5. l connector layout for quick and easy access Fast and convenient computer selection via push buttons or infrared IR remote control External IR Receiver 1 8m for maximum efficiency and convenience Extra thin IR handset allows easy storage in the mother unit Electronic Switching for greater reliability and durability High resolution video up to 2048 x 1536 DDC DDC2 DDC2B Supports VGA SVGA XGA and multisync monitors Easy installation no software required no configuration necessary 2002 12 13 SYSTEM REQUIREMENTS One VGA SVGA XGA or Multisync compatible analog monitor with a standard PC high density cable having a 15 pin HDB type male connector One VGA SVGA XGA or Multisync analog video card having a standard PC 15 pin HDB type female connector per computer A video cable with one male and one female HDB 15 connector at each end for each computer you will be installing Note One 1 video cable is supplied with this unit 2002 12 13 FRONT VIEW 1 IR Reciever Port The external IR Receiver has an attached cable that allows it to be placed anywhere up to 1 8m from the switch The cable from the external IR Receiver plugs in here 2 Monitor Port The cable from the monitor or digital projector plugs in here 3 Power Jack The AC Power Adapter cable plugs in here 2002 12 13 REAR VIEW
6. t comes packaged in protective plastic film Please remove this film before operating it with the VS 881 main unit 2002 12 13 INSTALLATION Installation is simply a matter of plugging in cables 1 Make sure that power to all the devices you will be connecting up have been turned off Plug the monitor or digital projector cable into the unit s Monitor port Plug one end of a video cable see the System Requirements section on p 3 into any available video port on the unit plug the other end into the computer s video output port Note One video cable is supplied with this unit Additional cables require an extra purchase Plug the power adapter supplied with this package into an AC source plug the power adapter cable into the unit s Power Jack Plug the IR Receiver cable into the IR Receiver port at the front of the main unit Power On all equipment 2002 12 13 ei Projector Monitor NoteBook Pc NoteBook PC NoteBook e J Mac NoteBook Mac 9 2002 12 13 PORT SELECTION MANUAL PORT UP PORT DOWN Use the Port Up and Port Down buttons located on the top of the VS 881 unit to cycle the video focus to the port you want A Port LED changes from ORANGE to GREEN to indicate that the computer connected to its corresponding port has the video focus IR PORT UP PORT DOWN The video focus can also be cycled among the computers
7. using the Port Up and Port Down buttons of the IR Remote Control Unit see p 7 Note The IR Remote Control Unit is used in conjunction with the external IR Receiver see the diagram on p 9 10 2002 12 13 e000 ooo IR DIRECT PORT SELECTION Instead of cycling among the individual computers one by one a computer can be directly selected by pushing the button on the Remote Control Unit that corresponds to its port number 1 8 on the main unit The selected port s LED changes from ORANGE to GREEN to indicate that the computer connected to its corresponding port has the video focus Note The VS 881 s Remote Control Unit has a maximum infrared signal range of up to10 meters For optimum performance make sure that there is a Clear line of site between the handset and the receiver 11 2002 12 13 SPECIFICATIONS Function Specification Connectors Video In 8 HDB 15 Male Video Out 1 HDB 15 Female Powerin 1 Power Adapter Jack IR 1 Earphone Jack LEDs 8 Online Selected Orange Green 1 VGA Display ON OFF Blue Port Selection Push Button Switches IR Remote Control Video Resolution 2048 x 1536 Power Consumption AC 9V 4 5W Operating Temperature 0 50 C Storage Temperature 20 60 C Humidity 0 80 RH Non condensing Housing Plastic Weight 0 45 Kg Dimensions L x W x H 17x 19x 4 5 cm 12
Download Pdf Manuals
Related Search