WMF 1000
Contents
1. Commissioning first commissioning after delivery from factory WW Heed the WMF 1000 user manual especially the hazard instructions and the A Safety chapter Unpacking and Setting up WMF 1000 lt Unpack coffee machine and set up on a stable horizontal support lt Check the coffee machine for possible transport damage in case of doubt do not put machine into operation and contact WMF service Plug the connector into a grounded outlet k Assemble the optional bean hopper attachment lt Insert drip tray and drip tray grid SS Test water hardness Packaging material in the carton i contains accessories Do not Plunge included carbon hardness test strips briefly in water approx 1 second throw away x One minute later read the degree of hardness on the colour scale of the test strip package Keep the original packaging for a The water hardness is set during commissioning possible return For information about the Prepare water tank accessories and the names of the machine parts see the user Remove the water tank from the coffee machine manual k Remove all accessories from the water tank For technical data see the user Rinse the water tank thoroughly with tap water manual o not put the water tank back into the machine yet The milk hose must be assembled first Do not loosen any screws or remove housing parts inside the machine there is deadly peril Insert the WMF tank filter due to mains voltage2. lt Remove the screen built into the water tank 1 lt Place the cartridge adapter on the water spout supports from above lock pulled and lock by pressing the lock down 2 s Unpack the tank filter cartridge and place on the cartridge adapter 3 i 74 i 74 With water hardness 0 4 do not use a tank filter Assemble the milk hose The milk hose is already mounted on the all in one spout e For refrigerated milk use the transparent milk nozzle assembled on delivery e For non refrigerated milk use the grey milk nozzle from the accessories k Push the all in one spout to the lowest position Insert the milk hose into the guide Set all in One spout Press the adjustment lever to the right of the spout and then move the spout Fill the water tank lt Fill the water tank with cold tap water max 2 8 litres lt Push the water tank back into the machine i 74 i 74 Fill the water tank only with fresh cold water Never use hot water mineral water milk or other liquids 33 2356 5000 09 2006 Connect milk hose to milk k Place the refrigerated milk directly to the right of the machine Place the milk hose with the milk nozzle on it into the milk container The hose end with the milk nozzle should reach to the bottom of the container Milk is a very delicate food When handling milk always heed hygiene Heed the HACCP cleaning sche dule See user manual
3. Chapter 7 Fill ground coffee hopper lt Open the cover towards the back lt Fill coffee beans max 320 g lt Can be expanded to 500 g with optional attachable coffee bean hopper lt Close the cover Heed that no foreign bodies land in the coffee bean hopper Such foreign bodies can damage the grinders of the coffee mill This damage is excluded from the warranty Switch on coffee machine Commissioning program k Press the Off C button The commissioning program is started language english OK P change The desired language for the display guidance is set here The commissioning program uses the display to lead you step by step through the commissioning Follow the display texts initial setting up of your WMF 1000 The display goes out after 5 seconds and you are lead through the basic settings Time Tank filter water filter no time hh mm ss OK P change OK P change If water filter is set to yes then the filter is rinsed Date now date dd mm yyyy OK P change place 31 container under h w spout Water hardness When rinsing the filter you will hear unusual noises This is normal The noises will end during the filter water hardn 13 16 rinse OK P change The machine now heats up heating up s Place a container for the rinse water under the all in one spout approx 200 ml After the heating up there is a coffe
4. e system rinse This warms up all the lines Duration approx 40 seconds Now the machine Is ready to operate your selection pls 24 10 2006 08 15 We wish you great enjoyment with your WMF 1000 P select 4P confirm ry care button is Browse backwards B Reduce value H Browse forwards Increase value The new values are saved when you exit the program The set values can be changed in the Basic settings program after commissioning See user manual Chapter 4 Settings
Download Pdf Manuals
Related Search