Home

Earth Centered Universe Pro V6.0

1. If an orbit has a name and is enabled it will be subsequently be referred to by its name instead of just Comet Asteroid 1 etc 3 5 2 Filter Orbits The Filter Orbits menu selection presents a dialog box allowing the user to search through the currently loaded database of orbital elements and to select orbits based on several criteria using the current date time and geographic location These selected orbits are enabled for display the rest are disabled Note that the non selected orbits are not deleted and remain in the database There are seven criteria used for searching each preceded by check box that enables the criteria a b c d Search text in orbit name this criterion compares the name of the object with the text entered If the text entered is contained within full name or a subset of the orbit name then the object is selected This comparison is case insensitive Faintest magnitude this criterion selects only objects whose magnitude is brighter than the value entered Brightest magnitude this criterion selects only objects whose magnitude is fainter than the value entered Minimum Solar Elongation this criterion selects only those objects whose angular distance from the Sun is greater than the value entered in degrees The Earth Centered Universe Pro V6 0 User s Manual Page 42 e Maximum Earth Distance this criterion selects only those objects that are closer to
2. The Forward One Step menu selection steps the time forward by one time step The time step is displayed to the left of the time step buttons in the status area This menu selection can also be executed by using the toolbar button or by pressing the key 3 7 4 Reverse One Step The Reverse One Step menu selection steps the time in reverse by one time step The time step is displayed to the left of the time step buttons in the status area This menu selection can also be executed by using the toolbar button or by pressing the gt key 3 7 5 Restore Date Time The Restore Date Time menu selection restore the date and time to what it was prior to the last time the animation mode was started or the last time this menu item was selected This feature is useful for experimenting with the animation mode without having to keep resetting the time back manually again and again 3 7 6 Trails On The Trails On menu selection enables the drawing of trails small crosses behind the Solar System objects If the trails are enabled a check mark will precede this menu selection 3 7 7 Trail Lines On The Trails Lines On menu selection enables the drawing of trail lines behind the Solar System objects If the trail lines are enabled a check mark will precede this menu selection 3 7 8 Clear Trails The Clear Trails menu selection clears the current trail history and removes any existing trail crosses or lines drawn behind Solar Syst
3. Type Telescope Interface With ECU To use an RA Dec type telescope interface with ECU you will need an RS232 cable to connect your telescope interface to your computer Before attempting to use ECU with your telescope you should be able to confidently use computerized telescope stand alone without the aid of a computer 6 4 1 Initial Set Up The first time you use the telescope interface you may have to make some adjustments to ECU s settings Enter the Telescope Type and General Settings menu selection from the Telescope menu see section 3 8 15 for details Select the Telescope Interface Type to match your telescope Select the communications port that is used to connect the telescope to the computer The update delay is automatically set to an appropriate value for the selected interface If your PC or the telescope interface operates slowly when the telescope interface is enabled try using a higher update delay If you use a Sky Commander or Losmandy DSC set the update delay to 0 5 seconds Speeds faster than this may cause the telescope interface to malfunction or become slow to operate The Earth Centered Universe Pro V6 0 User s Manual Page 83 The baud rate used by the Sky Commander or Losmandy DSC could be either 2400 baud or 9600 baud newer units are set to 9600 enabled older units are set to 2400 you may have to try both speeds until it works properly Its serial
4. contains the faintest magnitude that stars deep sky objects variable stars and double stars are displayed in the sky display These numbers are usually the same as that set in the Magnitude Limits menu selection however to keep the sky drawing speed fast the faintest magnitude for stars automatically changes with the field size this item always displays the actual magnitude limits currently in effect See section 3 4 3 which describes the Magnitude Limits menu selection i Sky Darkness contains information about sky darkness influenced by the Sun and the Moon By the Sun Daylight means the Sun is above the horizon Sun is down means the Sun is below the horizon between sunset and civil twilight SCivil Twilight means the sky darkness is between civil and nautical twilight SNautical Twilight means the sky darkness is between nautical and astronomical twilight Sky is dark means the sky darkness has reached astronomical twilight By the Moon Moon is up means that the Moon is above the horizon also displayed is the phase of the Moon as the percent of illumination Moon is down means the Moon is below the horizon j Local Sidereal Time LST contains the current local sidereal time this is the right ascension of objects presently crossing the meridian 2 2 The Sky Display Most of ECU s main window is occupied by the sky display There are three chart modes used to draw the
5. 3 4 10 Anti Sun The Anti Sun menu selection toggles whether or not a marker is displayed at the location of the Anti Sun the point in the sky opposite the Sun is displayed on the sky display If marked by a check mark the Anti Sun will be displayed assuming the Solar System objects are also turned on 3 4 11 Moon The Earth Centered Universe Pro V6 0 User s Manual Page 36 The Moon menu selection toggles whether or not the Moon is displayed on the sky display If marked by a check mark the Moon will be displayed assuming the Solar System objects are also turned on 3 4 12 Comets Asteroids The Comets Asteroids menu selection toggles whether or not the Comets and Asteroids relates of objects configured in the Orbits menu are displayed on the sky display If marked by a check mark they will be displayed assuming the Solar System objects are also turned on 3 4 13 Lines Points The Lines Points menu selection presents a dialog box that allows the user to BEIS control the display of lines and points on the sky display Pressing the right mouse button while over the lines toolbar button can also activate this menu selection Iw Constellations IV Field Targets Constellation Boundaries jw Zenith Check boxes are included to enable or disable the constellation lines constellation Iv Ecliptic Iv Celestial Poles boundary lines ecliptic line horizon line custom horizon line meridi
6. and Jenkner et al 1990 hereafter referred to as Papers I II and II Additions and corrections made in GSC 1 1 address E incompleteness misnomers artifacts and other errors due to the overexposure of the brighter stars on the Schmidt plates BR the identification of blends likely to have been incorrectly resolved BR the incorporation of errata reported by the user community or identified by the analysis of HST operational problems Among the primary authors of the GSC 1 0 and the associated systems the scientific responsibilities were divided as follows Helmut Jenkner system coordination and overall design Barry M Lasker astrophysics and photometry Brian J McLean algorithmic analysis and systems development Jane L Russell astrometry Michael M Shara system management and Conrad R Sturch production management and quality control GSC 1 1 analysis and production were performed primarily by Jesse B Doggett Daniel Egret Brian J McLean and Conrad R Sturch Helmut Jenkner is on assignment from the European Space Agency Jane L Russell is currently affiliated with the Applied Research Corporation Landover MD and Conrad R Sturch is with the Astronomy Programs Computer Sciences Corporation at Space Telescope Science Institute Daniel Egret is affiliated with Observatoire de Strasbourg France 2 DISCUSSION OF THE GSC 1 0 PROJECT Astronomical and Algorithmic Foundation As described in Paper I the GSC is primarily based
7. watching a particular horizon as the constellations rise or set or as a planet such as Mercury crests above the horizon If locked on the current Azim Alt a check mark will immediately precede this menu selection This selection also affects the behavior of the Use System Time each minute time updates and will cause the sky display to remain centered on the current altitude and azimuth unstead of the current equatorial position Important Note A special feature of ECU which takes effect if a configuration file is loaded with this mode active the sky display is centered on the saved Altitude and Azimuth instead of the usual saved Right Ascension and Declination The Earth Centered Universe Pro V6 0 User s Manual Page 53 3 7 13 On Comet Asteroid The Lock On Comet Asteroid menu selection presents a dialog box allowing the user to select a Comet or Asteroid to lock the sky display on A list box is presented containing the available list of objects The user is to select the desired object then exit the dialog box 3 7 14 Lock On Solar System Object The Lock On Solar System Object menu selection presents a sub menu of all the Solar System objects Sun Anti Sun Moon and Planets The menu item selected becomes locked to the center of the sky display in animation mode A check mark will immediately precede the Solar System object locked 3 7 15 Time Direction The Time Direction menu selection p
8. 3 116 Eer UNG Stepanem 54 3 7 7 A mation oP ESC BEE 54 3 8 Telescope Men 54 3 8 1 Enable Telescope Interface sessssssseeeneeeeeeerrrrrrnresserrrene 55 3 8 2 Move Telescope to Chart Center 55 3 8 3 Sync Telescope to Chart Center 55 3 8 4 Show Position chia coke ks clone eech 55 3 8 5 Use Default Field Tage 55 3 8 6 Show COOLUIMALGS eebe eene 55 3 8 7 Track Telescope aae aa aa aen a aeaaea iaa en a eanan 56 3 8 8 Auto Track Telescope AAA 56 30 9 Telescope e TEE 56 Doce OS OMMIAN 9 EE EE ed 56 3 8 11 Set Telescope Time EE 57 3 8 12 Set Telescope Geographic Location cceeeeeeeeeeeees 57 3 8 13 Set Encoder Interface Hesolutton 57 3 8 14 Select Alignment Stars egeieidergeteeeedeeegeg ege 57 3 8 15 Telescope Type and General Settings nnnnnnnnnnn1111eene 58 3 8 16 Encoder Interface Gettmgs 59 3 8 17 ASCOM Telescope Getup un 59 3 8 18 ASCOM Focuser Sepp ee 60 3 8 19 Use ASCOM Focuser 60 3 8 20 Telescope Goto Lime 60 3 9 Miscellaneous asst ite seen ete tac cee pts td ancoten depineenddasomenedeecaneeniod 61 S19 SUN ANG MOON Dales E 61 3 9 2 Julian Date Sidereal Time an 62 3 9 3 Retrieve Digitized Sky Survey Image 62 3 9 4 DSSsIMAGE E 62 3 9 5 Retrieve Nearest Clear Sky Clock 62 3 9 6 Retrieve Weather Information sssssssssnnnesessssrrrrrnnresseerrene 63 3 9 7 Run Image EE 63 3 9 8 Run Text e 63 3 9 9 Read GSC Regions from CD DOM 63 3 9 10 Directory File Setup EEN 64 eo
9. Astraea 6 Hebe 7 Iris 8 Flora 9 Metis 10 Hygiea 11 Parthenope 12 Victoria 13 Egeria 14 Irene When a comet or asteroid is selected a second dialog box is presented allowing the orbital elements of a comet or asteroid to be entered or changed The following items can be entered a Orbit Type select the type of orbit to be used either comet or asteroid b Comet or Asteroid Name a textual name that is displayed next to the comet or asteroid in the sky display maximum of 40 characters c Date of Perihelion or Date of Epoch if the orbit type is comet the date of perihelion is to be entered here If the orbit type is asteroid then the date of the epoch is to be entered here The date is entered as either decimal years or as year month and decimal days If the month is set to zero the decimal years are used and the month and date are ignored If the month is valid 1 to 12 the year month and date are used The Earth Centered Universe Pro V6 0 User s Manual Page 41 d e D Mean Anomaly M angle of an asteroid at the epoch in degrees Not used for comet orbits Perihelion Distance q or Semi major Axis a the distance of the comet from the Sun in astronomical units AU at Perihelion or the semi major axis of the asteroidal orbit in AU Eccentricity e the eccentricity of the orbit from 0 to 2 Argument of Perihelion the argument in de
10. Guide Star Catalog HGSC on a CD ROM it is left available so that users with an ECU or STSCI CD ROM can still use it The Read GSC Regions from CD ROM menu selection presents a dialog box that allows stars from the Guide Star Catalog in selected regions of the sky to be copied onto your hard disk This provides much faster access time and frees the user from Right Ascension hours 0 to P4 having to keep the ECU CD ROM in the drive It also allows for the deletion of data Decination degrees 20 topo for selected regions of the sky Read GSC Regions from CD ROM Enter range select CD ECU CD ROM then press either Read The source of data can be either the ECU CD ROM or the original Guide Star or Purge to begin STSCI CD ROM Catalog CDs published by The Space Telescope Science Institute In the dialog box below first select the appropriate CD ROM type Purge Cancel The user is then to enter the minimum and maximum Right Ascension and Declination to Read transfer from CD to hard disk or Purge remove from hard disk Pressing either button starts the process All stars brighter than the magnitude limit set as described in section 3 8 5 are Read Note that when using the STSCI CD ROMs which are a set of two disks if the declination values cross 7 5 degrees in Declination the operation will have to be performed twice once with each CD ROM Warning Depending on the size of the sky area
11. NGC Sky Vector and Advanced Astro Master and compatibles are referred to as an encoder interface All of these encoder interfaces operate from ECU s perspective in a similar fashion so are described together in section 6 2 Similarly GOTO type telescopes or mounts such as the Meade LX200s LXD and Autostar Astro Physics GTO Gemini Sky Tracker and the SkySensor are also described together in section 6 1 The ASCOM telescope type refers to the many telescope and focuser models supported by the ASCOM Initiative through their telescope drivers see www ascom standards org This presently includes dozens of models see www ascom standards org Downloads ScopeDrivers htm for the most current list If your telescope has an ASCOM driver available we recommend except for encoder interfaces to use the ASCOM telescope type Using ASCOM drivers with ECU is described in detail in section 6 3 And finally RA Dec type telescope interfaces such as the Sky Commander and Meade Magellans are described together in section 6 4 The Update Delay or speed is selected by pressing one of the radio buttons The Update Delay is the dead time between attempts to communicate with the telescope interface The actual update rate that you should choose depends on the The Earth Centered Universe Pro V6 0 User s Manual Page 58 response time of the interface and the speed of your computer The slow
12. Planetary Nebulae from the SEC database and Planetary Nebulae SAC Other Planetary Nebulae SEC v Other Globular Clusters Iw Show Sizes Shapes Open Clusters Filled Galaxies lt d d d The second group Miscellaneous provides 5 check boxes When Unknown Magnitudes is checked objects with no known magnitude i 3 Cancel are plotted regardless of the Deep Sky magnitude limit set see section 3 4 3 Only the Messier Objects are drawn when Draw only Messiers is checked When Show Sizes Shapes is checked ECU will draw objects their correct size shape and orientation if this information is known Many objects are quite small in angular size so you may have to zoom in quite close to see this feature in action When Filled Galaxies is checked the circles or ovals representing galaxy sizes and shapes filled in as a solid color And lastly if Dashed Open Clusters is checked open clusters on printouts only will be plotted using a dashed line rather than a solid line This feature is provided because the dashed lines provided by some printers are very thin and not very easy to see 3 4 7 User Objects The User Objects menu selection toggles whether or not the User Objects are displayed on the sky display The User Objects are a special type of object that provides the opportunity for the user to add new objects For example you might want to add the position of a newly discovere
13. Telescope Type and General Settings menu selection from the Telescope menu see section 3 8 15 for details Select the Telescope Interface Type to match your telescope type Select the communications port that is used to connect the telescope to the computer When selecting a telescope interface type the update delay and baud rate are automatically set to suitable values Under normal circumstances you should not have to change these parameters however if your PC or telescope operates slowly when the telescope interface is enabled try using a higher update delay Save these settings permanently by using the File gt Save or File gt Save As menu selections 6 1 2 Enabling the Telescope Interface Prior to enabling the telescope interface a number of steps must be completed as listed below Connect the RS232 cable between the telescope and your computer Turn the telescope on Align the telescope following the procedure outlined in its instruction manual Some telescopes such as the Celestron NexStars require their RS232 interfaces to be enabled before they will respond to commands from ECU 5 Enable the telescope interface by selecting the Enable Telescope Interface menu selection see section 3 7 1 or press its button on the tool bar If no error messages were displayed the telescope interface should be functional 7 If desired you can use the Set Telescope Time see section 3 8 11 and Set Teles
14. This information was provided to you either by e mail or included with your ECU CD DVD on paper Before the main window appears several data files plus the configuration file are loaded into memory If any problem is encountered while loading ECU due to bad or missing files not enough memory etc a small dialog box displaying a descriptive message is displayed on the screen Pressing OK will return control to Windows If all is successful the first opening screen will appear greeting the user with a colorful display of the constellation of ORION this of course is just the default and can be changed to anything you want including looking a certain direction such as South You can run any reasonable number of copies of ECU simultaneously as you wish however some advanced features may not work if you try to do these at the same time from two different copies of ECU such as internet downloading of orbit data telescope features etc Note Note that ECU remembers the size and position of the ECU window when it exits and it restores that size and position when it re starts By default ECU always uses the configuration file ECU CFG If a file name is specified on the command line ECU uses the specified file This is useful for setting up ECU icons to quickly bring up saved astronomical events You can also associate files of type cfg so that when you double click on an ECU configuration file
15. that is they can operate by themselves using their own integral display without the need for a separate computer others are simpler relying on a computer running a program such as ECU These instructions will assume that you are using the simpler type such as the Micro Guider 5 or the JMI SGT MAX 6 2 1 Initial Set Up The first time you use the encoder interface system you will have to make some adjustments to ECU s settings to match your specific telescope and encoder interface Enter the Telescope Type and General Settings menu selection from the Telescope menu see section 3 8 15 for details Select the Telescope Interface Type to one that most closely matches your encoder interface Select the communications port that is used to connect the encoder interface to the computer Initially select the update delay to 0 1 seconds this is the default If your PC operates slowly when the telescope interface is enabled try using a The Earth Centered Universe Pro V6 0 User s Manual Page 78 higher update delay The baud rate for all supported encoder interfaces is 9600 baud and ECU automatically sets that default baud rate for you Select the Encoder Interface Settings menu selection Enter your optical encoder resolutions and other settings according to the instructions outlined in section 3 8 16 The Reverse Direction check boxes are necessary because of the various ways that encoders are installe
16. the standard setting of one Experiment with this setting to determine the best setting for your printer If the user enters values smaller than one the symbols will be drawn proportionately smaller Likewise if the user enters values larger than one the symbols will be drawn proportionately larger 3 1 9 Set Printer Fonts The Set Printer Fonts menu selection presents a dialog box allowing the user to customize the fonts used in the printed star charts A list box is presented Set Printer Fonts containing the 13 text items whose fonts can be customized Constellation Labels Star amp Deep Sky Labels e S g e i Solar System Labels Cancel The user is to select the desired item followed by pressing OK The standard Extended Object Labels p i H Horizon Labels Windows font control dialog box will then be presented as shown below The font Ecliptic Point Labels font style and size can be selected Note that only TrueType fonts can be used SE aie Lem After exiting the dialog box by pressing OK the Set Fonts dialog box will be re Main Tiie ine a drawn Title Area Text Legend Area Titles The Earth Centered Universe Pro V6 0 User s Manual Page 23 Font Font style Times New Roman Regular Times New Roman O Trebuchet MS Italic O Tunga Bold O TwCenMT Bold Italic O Tw Cen MT Condense O Tw Cen MT Condense F TypoUpright BT 5 Sample AaBbYyZz Script Western e 3 1 10
17. 2 Enabling the Encoder Intertace 79 6 2 3 Using the Encoder Interface unn 80 6 3 Using an ASCOM Telescope and Focuser Interface With ECU 81 6 3 1 Initial Set US aoe An AMAA eg 81 6 3 2 Enabling the Telescope Interface 82 6 3 3 Using the Telescope Interface AAA 82 6 4 Using an RA Dec Type Telescope Interface With ECU 83 6 4 1 Initial Ee eieiei teeta deiere Eege 83 6 4 2 Enabling the Telescope Interface 84 6 3 3 Using the Telescope Interface AEN 84 Appendix Guide Star Catalog Inf0 ccccsseeeeeeeeeeeeeeeeseeeeeeeeeeeeeeseeeeeeeees 86 1 Getting Started Thank you for choosing to purchase The Earth Centered Universe Pro ECU for short pronounced eee see you ECU is a Planetarium and Telescope Control Program capable of simulating most of the phenomenon of the Earth s sky This includes but is not limited to the stars variable stars double stars planets Sun and Moon comets asteroids and deep sky objects In addition to this pro version a feature reduced and less expensive lite version is also available see our website ECU also provides a comprehensive interface to today s computerized telescopes and telescope to computer interfaces In addition it also works with the many telescope models supported by the ASCOM Initiative through their telescope drivers see www ascom standards org See section 3 8 15 for a complete list of supported telescope
18. Arrow moves the mouse pointer to the left by 1 pixel Up Arrow moves the mouse pointer up by 5 pixels Ctrl Up Arrow moves the mouse pointer up by pixel Down Arrow moves the mouse pointer down by 5 pixels Ctrl Down Arrow moves the mouse pointer down by 1 pixel Spacebar presses the left mouse button Ctrl Spacebar presses the right mouse button Ctrl causes the coordinate displays to track the mouse position while key is held down Shift causes the sky display to be dragged as the mouse position is moved while key is held down these keys are active only when the mouse is positioned over the sky display and the ECU window is active 3 Menu Selections The menu selections control most of the features of ECU and are divided into eight categories as listed below Each is described in detail in the identified sections a b c d e g h aD File the file menu handles the loading and saving of the configuration settings of ECU the printing of star charts and Object Report functions see section 3 1 Edit edit includes the undo feature control of the toolbar scroll bars status line and status box see section 3 2 Set the set menu allows the time geographic location solar system calculation settings atmospheric refraction flag comet and asteroid orbits sky display colors and sky drawing mode to be adjusted see section 3 3 Field the field menu controls if and how the stars
19. Centered Universe Pro V6 0 User s Manual Page 46 Important Note Depending on the state of Search Only Enabled Databases see section 3 6 12 only those databases that are currently enabled may be searched For example if the deep sky objects are turned off and Search Only Enabled Databases is checked then the galaxy NGC7331 will not be found Six different types of web searches can also be invoked directly from the Database Search dialog box Enter the search text select the Database Search desired type of web search using the drop down list and then press Search Object the GO button A web browser window will appear with the result of the search You must be connected to the Internet to use this feature See section 5 4 for information The object types that can be searched from ECU s built in databases for are listed below a b c d e a 2 h i aD Recent Searches Web Search ECU Search Constellations the 88 constellations can be searched by Web Search z entering their complete formal name e g Ursa Major Common Star Names bright stars can be searched by entering their common name e g Deneb Solar System Objects the Sun Moon and major Planets can be searched by entering their name e g Saturn Comets and asteroids are searched by name Stars by catalog number any star in the Yale Bright Star YBSC database can be se
20. Estimate if available j Proper Motion if available 4 2 4 Hubble Guide Star Catalog The Hubble Guide Star Catalogue called the GSC or HGSC can be installed via a separate installer see section 1 2 to install it It is derived from a pair of CD ROM disks published by The Space Telescope Science Institute and used by Nova Astronomics under license These disks contain about 15 000 000 stars with the faintest being about magnitude 15 5 ECU ignores the objects classified as non stellar objects The GSC was originally created to provide a selection of guide stars in support of the Hubble Space Telescope In dense regions of the Milky Way the faintest stars are only about magnitude 13 This is because the goal in selecting stars was to have a nominal number of stars per square degree thus in dense regions there were more bright stars to choose from A large amount of information regarding the GSC is included in Appendix A of this manual a requirement according to its license agreement The Earth Centered Universe Pro V6 0 User s Manual Page 66 The GSC provides the following information for each star a Position J2000 0 epoch b Magnitude nearest tenth c Position Error Estimate d Magnitude Error Estimate e Magnitude Band f Plate ID With today s large hard disks it is recommended that you install the entire GSC to your hard disk It used the GSC be sure to enable the Hubble Guide Star Catalog check box
21. K Kohoutek planetary nebulae King open clusters Kr Krasnogorskaja planetary nebulae Lac Lacaille globular clusters Loden open clusters LDN Lynds dark nebulae Lynga open clusters M Messier all types of objects except dark nebula MCG Morphological Catalog of Galaxies The Earth Centered Universe Pro V6 0 User s Manual Page 68 Me Merrill plantary nebulae Mrk Markarian open clusters and galaxies Mel Melotte open clusters MI thru M4 Minkowski planetary nebulae NGC New General Catalog of Nebulae amp Clusters of Stars Pal Palomar globular clusters PC Peimbert and Costero planetary nebulae Pismis open clusters PK Perek amp Kohoutek planetary nebulae RCW Rodgers Campbell amp Whiteoak bright nebulae Roslund open clusters Ru Ruprecht open clusters Sa Sandqvist dark nebulae Sher open clusters Sh Sharpless bright nebulae SL Sandqvist amp Lindroos dark nebulae SL Shapley amp Lindsay clusters in LMC Steph Stephenson open clusters Stock open clusters Ter Terzan globular clusters Tombaugh open clusters Ton Tonantzintla globular clusters Tr Trumpler open clusters UA Catalog of selected Non UGC galaxies UGC Uppsala General Catalog galaxies UKS United Kingdom Schmidt globular clusters Upgren open clusters VV Vorontsov Velyaminov interacting galaxies vdB van den Bergh open clusters bright nebulae vdBH van den Bergh amp Herbst bright
22. N centers the sky display on the local northern horizon S centers the sky display on the local southern horizon E centers the sky display on the local eastern horizon W centers the sky display on the local western horizon Z centers the sky display on the local zenith the overhead point Ctrl N equivalent to Center gt On Next Object Ctrl P equivalent to Center gt On Previous Object Escape stops the execution of animation mode B silences the system beeper if it is beeping while searching for an object with the telescope encoder interface The Earth Centered Universe Pro V6 0 User s Manual Page 18 equivalent to Animation gt Forward One Step equivalent to Animation gt Reverse One Step Insert increases the animation time step by one notch Delete decreases the animation time step by one notch Ctrl T equivalent to Telescope gt Move Telescope to Chart Center T centers the sky display at the current telescope position H equivalent to Field gt Telescope Field gt Flip Horizontal V equivalent to Field gt Telescope Field gt Flip Vertical U causes ECU to look for changes to the US Naval Observatory star catalog files Right Arrow moves the mouse pointer to the right by 5 pixels Ctrl Right Arrow moves the mouse pointer to the right by pixel Left Arrow moves the mouse pointer to the left by 5 pixels Ctrl Left
23. PC Clock is UTC menu selection sets whether the computer s clock is to be interpreted as local time or UTC If checked the clock should be set to UTC if not it should be set to local time This setting is provided primarily for those who operate ECU in an observatory and wish their observations to be in UTC 3 3 1 6 Local Time Format The local mean time LMT display in the status area is displayed in either 24 hour or am pm format The Local Time Format menu selection is a sub menu of AM PM and 24 Hour selections each selection setting the respective format The current format is identified by a check mark 3 3 1 7 Daylight Savings The Daylight Savings menu selection toggles whether the current local time is to be interpreted as a daylight savings time It is used by ECU to convert from local time to Universal time If a check mark is present daylight savings mode is enabled If ECU is using the PC s system clock and the daylight savings time check mark is present the PC s time should be set to the daylight savings time The daylight savings mode can also be controlled from the Enter Time dialog box see section 3 3 1 1 3 3 2 Geographic Location The Geographic Location menu selection presents a dialog box allowing the selection of a location on the Earth s surface The location can be selected from the provided list of hundreds of locations around the world or you can enter the latitude longitude
24. Russell J L Jenkner H Shara M M The Guide Star Catalog I Astronomical and Algorithmic Foundations Astron J 99 2019 2058 1990 Ratnatunga K U Comparison of GSC Photometry in Three Southern Fields Astron J 100 280 290 1990 Russell J L Lasker B M McLean B J Sturch C R Jenkner H The Guide Star Catalog II Photometric and Astrometric Calibrations Astron J 99 2059 2081 1990 Taff L G Lattanzi M G Bucciarelli B Two Successful Techniques for Schmidt Plate Astrometry Astrophys J 358 359 369 1990 Taff L G Lattanzi M G Bucciarelli B Gilmozzi R McLean B J Jenkner H Laidler V G Lasker B M Shara M M Sturch C R Some Comments on the Astrometric Properties of the Guide Star Catalog Astrophys J 353 L45 L48 1990 Turon C Gomez A Crifo F Creze M Perryman M A C Morin D Arenou F Nicolet B Chareton M Egret D The Hipparcos Input Catalogue I Star Selection Astron Astrophys 258 74 81 1992 Wells D C Greisen E W Harten R H FITS A Flexible Image Transport System Astron Astrophys Suppl Ser 44 363 370 1981 The Earth Centered Universe Pro V6 0 User s Manual Page 90 About the Author David J Lane has been an active amateur astronomer since the early 1980s and is a life member of the Royal Astronomical Society of Canada RASC He is employed as the Astronomy Technician and High Per
25. Select Alignment Stars menu selection provides a sub menu allowing up to two alignment stars used by the optical encoder interface system to be selected The menus themselves show the currently selected alignment stars Alignment stars can be chosen from any object in ECU s databases Usually stars are used to align the optical encoder system however it is possible align the system using the Sun Moon and or planets in the daytime but if you do this you have to select the Sun Moon and or planets as alignment stars immediately before doing the alignment This is because their positions are what are saved and these positions change with time To select an alignment star click on the desired object With its Identify Object dialog box displayed select either 1st Alignment Star or 2nd Alignment Star menu items The Earth Centered Universe Pro V6 0 User s Manual Page 57 For maximum accuracy you should select alignment stars carefully by selecting stars that you can easily identify in the real sky and stars that cause both axis of the telescope to move significantly when you move the telescope between the stars An example of this for an altitude azimuth mounted telescope such as a Dobsonian would be to select one star low in the south and another high in the northeast If the one star alignment process is used it is best select a star high in the sky to reduce the effects of atmospheric refraction and nea
26. The small status RE box left contains the following information local mean time right ascension and declination field size magnitude limits for stars and deep sky objects and animation step L 10 0 10 0 The large status box right adds the following information geographic 11 01 0908 00pm T location latitude and longitude universal time azimuth and altitude UTC animation step size and sky darkness In both cases these windows are placed at the top left corner of the sky display but can be moved by the user as desired 04 38 51 4 36 01 59 Below is a description of all of the status items included in both the status line and status boxes i 69 42 a Location the geographic location on the Earth s surface where the observer is located In the large status box the latitude and longitude of the observer is displayed below the place name as degrees and minutes Positive latitudes are North of the equator and positive longitudes are West of the Greenwich meridian To set your geographic location Sky Darkness see section 3 3 2 which describes the Geographic Location menu selection b Local Mean Time LMT contains the date and time of the local civil time The date is always in the format year month date The time is either displayed as hh mm in 24 hour time or hh mmpm in am pm format If daylight savings time is enabled the title changes from LMT to LDT Local Daylight Time c Universal Time UTC conta
27. Windows will launch ECU and load that file automatically For information on how to set this up search for the word associate in your windows on line help Technical Note One other seldom used option available on the command line is I file ini This option instructs ECU to obtain its installation settings from an alternate ini file Usually it reads the file ecu ini located in the same directory as the ecu6 exe file however in certain network server or other custom installations this option is useful when users don t have write permission to the ECU directory Network administrators are encouraged to contact the author for advise on how to install ECU on a network server I suggest you read Section 2 next It introduces the operation of the program However if you just want to explore that s fine too I think you will find ECU s usage quite intuitive but there are some powerful hidden user interface features that you may miss out on if you don t at least skim through Section 2 Section 3 is reference information for all of the menu selections Section 4 describes the astronomical calculations and object databases either included with or supported by ECU and also the object databases The Earth Centered Universe Pro V6 0 User s Manual Page 10 Section 5 is definitely worth a read since it describes the very important Identify Object dialog box If you will be connecting a computerized
28. allowing the user to scroll down to access more information RA 05 35 22 9 5 5896941 hours Dec 05 24 45 5 412582 degrees Each obi is Tisted hel ith h A ific infi i hat is displ d Magnitude 5 1 Extinction 0 22 Each o ject type is iste elow with each one s specific information that is displaye Azimuth 135 28 Rises at 11 41 in the identify objects dialog box Akitute 29 39 Transits at 17 22 Airmass 2 0 Sets at 23 03 gt b b e A Other Names HR1897 540132321 HD37041 a Sun the sun s distance in astronomical units and in kilometers its light Spectral Type O9 5VP B V 0 09 travel time in minutes its size in minutes of arc and the solar longitude Froper Motion Ge aoii Dec 0 005 s f e e t tude 209 05 b Moon the moon s distance from the Earth in kilometers its size in Galactic Latitude 13 37 minutes of arc its phase its phase angle and age in days and its illuminated fraction in percent Aeria c Planets the planet s magnitude its distance from the Earth in Web Sesch astronomical units and in kilometers its light travel time in hours and 7 minutes its size in seconds of arc its phase 0 to 1 and its rate of motion in several formats d Comets or Asteroids its magnitude its distance from the Earth and the Sun in astronomical units and in kilometers its light travel time in hours and minutes its solar elongation for asteroids its phase angle and its rate
29. below 3 6 1 On Database Search The On Database Search menu selection is used to search the installed databases for a specified object It can also search several web databases Pressing the left mouse button on its toolbar button can also activate this menu selection The keyboard equivalent to this menu item is Ctrl F means find The user is presented with a dialog box that allows the search text to be entered Several buttons are provided to reduce the requirement for keyboard entry especially while at the telescope In addition there are several keyboard shortcuts for commonly entered objects specifically N is equivalent to NGC U is equivalent to UGC T is equivalent to IC and S is equivalent to SAO Therefore typing N3434 is equivalent to typing NGC3434 The line of text entered is converted to upper case to avoid ambiguities and all spaces are removed before the search is started In addition ECU remembers the last 10 searches which you can select using the Recent Searches drop down list If the ECU Search button is pressed a search of ECU s databases commences and if successful the screen is redrawn with the object at the center of the sky display If the Center Scope button is pressed the telescope if enabled is centered on search object If the search is not successful a message box will appear informing the user of this The Earth
30. called DSNAMES ECU and is formatted as shown by the following sample entries below You can edit this file in any text editor such as the Windows Notepad 47 Tucanae NGC104 Andromeda Galaxy M31 Antennae NGC4038 Barbell Nebula M76 Barnard s Galaxy NGC6822 The first entry on each line is the common name The second entry is another name by which the object is known as usually an NGC or M catalog number This other name must begin at column 41 inline with all the others and be searchable in ECU s databases You can also enter a position in the sky directly as a right ascension and declination using the same format as described in section 3 6 16 3 6 8 On Comet Asteroid The On Comet Asteroid menu selection presents a dialog box allowing the user to select a Comet or Asteroid to center the sky display on A list box is presented containing the available list of objects These can be sorted in alphabetical order by using the Sort button The user is to select the desired object then exit the dialog box ECU then centers the sky display on the selected comet or asteroid Center on Comet Asteroid 1 Ceres 2 Pallas 3 Juno 4 Vesta 5 Astraea 6 Hebe 7 Iris 8 Flora 9 Metis 10 Hygiea 11 Parthenope 12 Victoria 13 Egeria 14 Irene 3 6 9 On Solar System Object The Earth Centered Universe Pro V6 0 User s Manual Page 49 The On Solar System Object menu selection
31. contains a sub menu of all the Solar System objects Sun Anti Sun Moon and Planets The menu item selected is centered on the sky display The keyboard equivalent to center on the Moon is Shift M and to center on the Sun is Shift S 3 6 10 On Point on Horizon The On Point on Horizon menu selection contains a sub menu of all the cardinal points on the local horizon plus the Zenith the overhead point The menu item selected becomes centered on the sky display There are several keyboard equivalents for these menu selections see section 2 5 There are also four buttons on the tool bar that correspond to the four main cardinal points north south east and west 3 6 11 On Telescope Position The On Telescope Position menu selection causes the sky display to be centered at the current telescope position The keyboard equivalent to this menu item is T 3 6 12 Search Only Enabled Databases The Search Only Enabled Databases menu selection specifies if database searches include only those databases and object types currently enabled or all installed databases 3 6 13 On Object From List The On Object From List menu selection presents a dialog box allowing the user to select one of the objects in the currently selected Object List file see section 3 6 16 Object List Pressing the Search button causes the sky display to be redrawn at the selected object If the Center Scope button is pressed the telescope if enable
32. digit decimal region number with leading zeroes used as required to fill the field The directories are named as follows Directory Declination Regions Disc From To From To 0000 00D 00 07D 30 0001 0593 1 0730 07D 30 15D 00 0594 1177 1 1500 15D 00 22D 201 1178 1728 1 2230 22D 30 30D 00 1729 2258 1 3000 30D 00 37D 30 2259 2780 1 3730 37D 30 45D 00 2781 3245 1 4500 45D 00 52D 30 3246 3651 1 5230 52D 30 60D 00 3652 4013 1 6000 60D 00 67D 30 4014 4293 1 6730 67D 30 75D 00 4294 4491 1 7500 75D 00 82D 3 0 4492 4614 1 8230 82D 30 90D 00 4615 4662 1 s0000 00D 00 07D 307 4663 5259 2 The Earth Centered Universe Pro V6 0 User s Manual Page 88 0730 07D 30 15D 00 5260 58 37 2 1500 15D 00 22D 3 0 5838 6411 2 2230 22D 30 30D 00 6412 6988 2 3000 30D 00 37D 30 6989 7522 2 3730 37D 30 45D 00 71523 8021 2 S4500 45D 00 52D 30 8022 8463 2 5230 52D 307 60D 00 8464 8839 2 s6000 60D 00 67D 30 8840 9133 2 6730 67D 30 75D 00 9134 9345 2 S7500 75D 00 82D 30 9346 9489 2 8230 82D 30 90D 00 9490 9537 2 Directory TABLES contains the following supporting files for the GSC written in FITS table format COMMENTS TBL 1 Introduction and general comments REV_1_1 TB
33. displayed as varying sized dots according to the star s brightness The larger the dot the brighter is the star c Lines there are many lines displayed by ECU These include the constellation lines constellation boundary lines horizon line ecliptic line meridian line galactic equator line and telescope field of view lines Markers are also displayed at the Zenith the overhead point the North and South poles and the North and South galactic poles d Labels there are text labels displayed for solar system objects constellation names and labels for the coordinate grid ecliptic and horizon lines and markers There are extensive options for labeling stars and deep sky and other objects The fonts for all labels are programmable by the user e Solar System objects the planets sun anti sun moon comets and asteroids are displayed The Sun and Moon are displayed to their correct size The phase of the Moon is also shown Planets are displayed as a small point similar in size to a medium brightness star except with a unique color Comets are displayed using the special symbol below which resembles a comet If a comet tail length is specified its projected length is shown on the sky by a line f Deep sky objects deep sky objects are displayed in six different categories each using a different symbol These symbols shown below in order are Galaxies Open Clusters Globular Clusters Bright Nebulae Planetary Nebula
34. errors the object will not likely be in the exact center of the field of view of the telescope Use the telescope s manual controls to position the object in the center of the field of view Then finally select the same object again with the left mouse button and press the Sync Scope button from the Identify Object dialog box You can also synchronize the telescope to the position occupied by the center of the sky display by using the menu selection Sync Telescope to Chart Center see section 3 8 3 Depending on the Confirm Syncs setting see section 3 8 10 the user may be prompted to confirm a sync operation Note that not all telescopes such as the Celestron NexStars support the syncing feature 6 2 Using an Encoder Interface With ECU To use an encoder interface with ECU you will need as a minimum the following components 1 Optical encoders mounted on both axis of your telescope 2 An interface box called the encoder interface to translate the encoder signals into RS232 format 3 An RS232 cable to connect the interface box to your computer There are many encoder interfaces on the market available from several suppliers Not all of these have the required RS232 interface Many of these units are manufactured by the same company Tangent Instruments but marketed my many companies under different brand names and are compatible with each other and thus with ECU Some of these encoder interfaces are self contained
35. here since it is identical to every other Windows application that has an Open function Note Please note that configuration files created with all versions from V3 0 to V5 0 of ECU can be read and are automatically converted to V6 0 format Configuration files from versions older than V3 0 cannot be read 3 1 2 Save The Save menu selection saves the current configuration settings to the current configuration file name The current file name is always displayed on the ECU Window title The keyboard equivalent to this menu selection is Alt S 3 1 3 Save As The Save As menu selection saves the current configuration settings to the file specified by the file name selected in the dialog box presented I will not detail the operation of this dialog box since it is identical to every other Windows application that has a Save As function The keyboard equivalent to this menu selection is Alt A The Earth Centered Universe Pro V6 0 User s Manual Page 20 Configuration File Saye File name Folders ecu cfg c program files ecu6 Cancel Ech E gt PROGRAM FILES Es ECUG asc EI IMAGES1 EI IMAGES2 Save file as type Drives ECU Configuration Files v c DRIVEC v Network 3 1 4 Revert The Revert menu selection re loads the configuration settings from the current configuration file name The current file name is always displayed on the Window main title This function is useful for example i
36. months in order to obtain reasonably accurate asteroid positions After this file __cencel is downloaded it is converted into ECU s orbit format For information about this database see ftp ftp lowell edu pub elgb astorb html To download data select the Orbit Category note the Internet URL http and ftp addresses are supported address and make any necessary changes note the location where the orbit file will be saved to and press the Download button Be sure you are on the internet before pressing Download The ECU main window will become minimized and an ECU Status box will appear which will detail progress of the download You can abort the download using the Abort Download button After the download has completed press the Dismiss button to restore the ECU main window The Earth Centered Universe Pro V6 0 User s Manual Page 45 ECU Status Last Message or Error scroll down to see most recent messages Downloading from http cfa www harvard edu iau E phemerides Comets S oft OCmt txt Saving file to c program files ecu6 comets orb Initiating connection Starting download 10k downloaded 20k downloaded Done File downloaded successfully Dismiss To automatically load the orbit file into ECU after it has been downloaded except for the Lowell Observatory database check the Load Orbit File After Download check box before pressing
37. nebulae vdB Ha van den Bergh Hagen open clusters Vy Vyssotsky planetary nebulae Waterloo open clusters Westr Westerlund open clusters Zw Zwicky galaxies b Other Name contains other catalog designations that the object is known by The same abbreviations as in a are used c Object Type the type of object from the list below Asterism Bright Nebula Quasar Unverified Southern Object Planetary Nebula Cluster with Nebulosity in the SMC Open cluster in the SMC Supernova Remnant Nonexistent in RNGC Open Cluster Multiple Star Globular Cluster in the LMC Open cluster in the LMC Globular Cluster in a Galaxy Cluster with Nebulosity in a Galaxy Globular Cluster Diffuse Nebula in a Galaxy Galaxy cluster Galaxy Diffuse Nebula in the SMC Globular Cluster in the SMC Cluster with Nebulosity in the LMC Diffuse Nebula in the LMC Cluster with Nebulosity Dark Nebula d Position the object s position Right Ascension and Declination in the J2000 0 epoch e Magnitude the object s brightness to the nearest tenth There are many objects which have no published f Position Angle PA for elongated objects the position angle is given in degrees with north as zero degrees progressing clockwise g Description a visual description of the object Most of these are from the NGC some are from prominent amateurs Back issues of De
38. of motion in several formats e Yale Bright Star Catalogue Stars the star s magnitude its Bayer Flamsteed identification its Yale Catalogue number its SAO Catalogue number its Henry Draper Catalogue number its spectral classification its color as B V and its proper motion f SAO Catalogue Stars the star s magnitude its SAO Catalogue number and its spectral classification g Tycho 2 Catalogue Stars the star s magnitude in both B and V colors its Tycho 2 Catalogue number its Hipparcos number if applicable its HD number if applicable its measured parallax with uncertainty the implied distance in light years with uncertainty and its proper motion h Hubble Guide Stars the star s magnitude its GSC Catalogue number its estimated position error its estimated magnitude error its magnitude band and its Plate ID i US Naval Observatory Stars the star s magnitude both blue and red if known its identity by zone file and star number and the plate number POSS or SRC that it originated from j SAC Deep Sky Objects the object s magnitude its primary and other names its description its size its position angle the object class and various notes are displayed See section 4 2 1 for a detailed description k PGC Galaxies the galaxy s magnitude its primary and up to four other names its morphological type its size its position angle its class and its radial velocity The radia
39. on an as is basis Defective media will be replaced free of charge for a period of ninety 90 days from the date that you received the software Should you encounter problems with the software Nova Astronomics entire liability shall be at the sole option of Nova Astronomics either a to terminate the license and return any license fees that you paid to Nova Astronomics for the software or b repair or replace the software Nova Astronomics makes no claims as to the suitability of this software for any specific use In no event shall Nova Astronomics be liable for any damages whatsoever arising out of the use of this software GUIDE STAR CATALOG NOTICES applies to the NASA Guide Star Catalog included on the Earth Centered Universe CD ROM Copyright Notice The Guide Star Catalog GSC version 1 1 is copyrighted by the Association of Universities for Research in Astronomy Inc and is reproduced here by permission The scientific efforts leading up to the production of the GSC are described in Volume 99 pp 2019 2154 of the Astronomical Journal and in text files on the CD ROM version of the GSC from which data contained herein were extracted Warranty Disclaimer NOVA ASTRONOMICS LICENSOR MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THE GSC OR ITS USE AND OPERATION FOR ANY PURPOSE THE EXCLUSION OF IMPLIED
40. right mouse button is pressed and PSSST wi released the current mouse position will become the center of the sky i Angular Separation 16 09 41 16 1613 display at the current scale This feature is very useful for quickly Position Angle CCW through East 49 3 panning about the sky b Measure an angle the second function performed by the right mouse button is its ability to measure angles on the sky Angles are measured by positioning the mouse at one location dragging the mouse with the right mouse button pressed to another location and then releasing the button A dialog box will appear which displays the angular measure between the two points in both degrees minutes and seconds and in decimal degrees RA 00h50 0m Dec 11 00 Azim 16 21 Alt 00 49 It also provides a the position angle between the two points b the differences in Right Ascension and Declination between the two points and c the differences in Azimuth and Altitude between the two points This feature is useful for those who find objects with their telescope by offsetting angular distances in each axis from a bright star The left mouse button also interacts with the toolbar scroll bars and status line See section 2 1 and 2 4 for details 2 3 3 Shift Key When the Shift key is held down while the mouse cursor is within the sky display the sky can be dragged in any direction as the mouse cursor is moved The curso
41. see d above and section 3 8 6 This setting will normally be set correctly during installation of ECU however you may wish to change it to a hard disk with more space available other than where ECU is installed US Naval Observatory Settings This section of the dialog box controls all settings used to access the US Naval Observatory s USNO A 2 0 and SA 2 0 star catalogs Note that these databases are not included with ECU due to licensing issues They can however be downloaded from the Internet by individual users For information about these stellar databases which contain up to 500 000 000 stars see section 4 1 5 After configured and enabled see Active Star Databases above the USNO stars are drawn whenever the field size is smaller than 5 degrees in vertical height This limit allows for a fast re draw time and a density of stars that is not overwhelming The following items can be configured a Directory set this item to the location of the USNO files This may be a location on your hard disk or perhaps on a DVD or CD ROM If changing CDs or DVDs note that ECU only looks for new USNO files when the U button is pressed or when this dialog box exited with the OK button b Cache The USNO databases are divided into many regions of the sky This entry determines how much memory is allocated in order to cache USNO stars in memory Values from 1 to 16 megabytes can be entered c Plot Non USNO Stars if c
42. see section 3 8 15 a large version of this window may also appear making it easier to see the read the coordinates when you are a large distance from the screen Move the telescope until both the coordinates displayed read zero or nearly so To make this process easier when the telescope is closer than 2 degrees from the object in either axis a beeping sound will be heard if enabled see section 3 8 16 This feature eliminates the necessity of looking at the computer screen while moving the The Earth Centered Universe Pro V6 0 User s Manual Page 80 telescope except for the final positioning To silence the beeping sound press the button or the B key on the keyboard Center Scope RA 00h37 88m Dec 23051 3 OK The best method to find objects is to move each axis of the telescope separately Move the first axis until the beeping sound is heard Silence the sound Move the second axis until the beeping sound is heard again Silence the sound Zero in on the object by fine adjusting the telescope position until the coordinates display reads zero End the process by pressing the OK button You can also use the menu selection Move Telescope to Chart Center see section 3 8 2 4 Synchronize Telescope re synchronizes the current telescope coordinates to known coordinates This improves the pointing accuracy of the telescope The usual procedure is to center a known object in
43. sky These are the Star Atlas mode the Local Horizon mode and the Manual Sky Rotation mode The Star Atlas mode depicts the sky similarly to conventional printed star charts that is with the lines of declination horizontal lines of right ascension vertical and north up The Local Horizon mode depicts the sky as it would appear relative to the Earth s horizon from the current geographic location that is up in the sky is up on the screen To select the mode desired see section 3 4 1 The Local Horizon mode provides a more accurate simulation of the sky the only penalty is that it draws a bit slower than the Star Atlas mode This reduction is speed will only be noticeable when using very slow computers by today s standards The Manual Sky Rotation mode is used to rotate the chart to any arbitrary angle as specified by the user The angle used is with respect to the Sky Atlas mode For example 0 degrees of manual rotation would produce the same result as the Sky Atlas mode The sky display shows the positions of celestial objects using one of three projections These three projections were selected for the speed of their calculation however there is some distortion at the limits of their usefulness In the Star Atlas mode when displaying the sky from 45 to 45 degrees Declination and a field size of 60 degrees or less a simple modified Mercator projection is used This projection causes the objects at high Declinatio
44. text description of the file format below is the first six lines of the sample nearby object database provided 0 0 090153 0 37 357363 0 8 6 HD225213 14 5 0 0 086399 0 45 786281 0 9 9 34 7 O 0 088117 0 67 832194 0 8 4 HD55 42 4 0 0 094777 0 45 813201 0 8 9 HD38 34 7 0 0 094777 0 45 810673 0 9 0 34 7 O 0 104366 0 58 437145 0 6 0 HD123 72 5 3 4 8 Planets The Planets menu selection presents a dialog box which allows the user to control various Bop display parameters for the eight planets Pressing the right mouse button while over the solar system toolbar button can also activate this menu selection Label All On All OFF Naked Eye Mercury The two entries for each planet include one check box indicating if the respective planet is venus displayed and a second check box indicating if the planet s name is also displayed W Jupiter Saturn Three buttons are also provided which make it easy to a turn all the planets off All Off b turn all the planets on All On and c make only the planets visible to the naked eye visible Naked Eye Uranus Cancel Neptune Pluto dd dd d lt I lt dd dd dd 090 4 Note that we love Pluto and still consider it a planet in ECU 3 4 9 Sun The Sun menu selection toggles whether or not the Sun is displayed on the sky display If marked by a check mark the Sun will be displayed assuming the Solar System objects are also turned on
45. the Download button When the file is loaded it will either replace any orbits currently defined or append to the currently loaded database depending on the state of the Append New Orbit item see section 3 5 11 Important Note This feature depends on source data not provided by Nova Astronomics Nova Astronomics can not provide any assurances that these outside agencies will continue to provide this data indefinitely If these sources become unavailable contact us and we may be able to provide an alternate source 3 5 11 Append New Orbits The Append New Orbits menu selection toggles whether or not the new orbits replace any orbits currently defined un checked or if they append to the currently loaded database checked This feature affects the operation of Load Orbits Download Orbits and Search Orbits 3 6 Center Menu The Center menu allows the user to quickly center on most objects in ECU s databases This includes centering on a text search of the databases a specified Right Ascension Declination a specified Azimuth Altitude a constellation a bright star a Messier object a named deep sky object Solar System object or a point on the local horizon When an object is centered on the sky display a cross hair is used to mark it Also included are four object list functions that are used to select objects from a pre programmed list Each centering menu selection is described separately
46. the Encoder Interface Once enabled and aligned the encoder interface is quite easy to use Several functions are provided each is described below 1 Position Display if the menu selection Show Position see section 3 8 4 is enabled an indicator will be drawn on the sky display at the position which the telescope is pointed to and will follow it in real time If the menu selection Track Telescope see section 3 8 7 is enabled and the telescope position moves out of the sky display it will be re drawn with the current telescope position at the center of the sky display You should also read about the Auto Track Telescope feature in section 3 8 8 The type of indicator displayed depends on the state of the menu selection Use Default Field Targets see section 3 8 5 If checked the position display will be the programmable field circles or rectangle as described in section 3 4 18 1 If not checked a fixed size cross hair is used 2 Coordinate Display if the menu selection Show Coordinates see section 3 8 6 is enabled a window will be visible which displays the real time equatorial coordinates of the telescope 3 Find an Object to locate an object in the sky select the object in the sky display with the left mouse button and press the Center Scope button This will cause a window shown below to appear on the screen Depending on the Large Center Scope Box setting in the Telescope Type and General Settings dialog box
47. the exact center of the telescope s field of view Then select the same object from the sky display with the left mouse button and press the Sync Scope button from the Identify Object dialog box If you aligned using the two star method ECU re aligns using the current object and the better of the two original alignment stars If ECU determines that the alignment will be of low accuracy it presents a warning dialog box to user You can also synchronize to the position occupied by the center of the sky display by using the menu selection Sync Telescope to Chart Center see section 3 8 3 Depending on the Confirm Syncs setting see section 3 8 10 the user may be prompted to confirm a sync operation 6 3 Using an ASCOM Telescope and Focuser Interface With ECU The ASCOM AStronomy Common Object Model Platform is quoted from their website a set of technologies and drivers that form the basis for interoperability between ASCOM based tools Besides a set of utility objects and Microsoft supplied scripting engines the ASCOM Platform supports a variety of instrument types via standard drivers For further information see Www ascom standards org These drivers mostly for telescopes and electric focusers allow ECU to access and control a large number of telescopes and focusers in a standard way without knowing anything about the actual telescope or the way it interfaces to the computer The drivers are always being updated bugs are f
48. this is exclusion not an inclusion For example if only Stars is checked all object types currently displayed except stars will be included in the report file 3 1 12 Exit The Exit menu selection is used to exit ECU If the configuration settings have changed a message box appears asking to user to specify if the settings are to be saved to the current file name Pressing Yes or the enter key will save the configuration settings to the current file name and exit ECU Pressing No will exit ECU without saving the configuration settings Pressing Cancel will return control to ECU ECU can also be exited by double clicking on the Control menu box or by selecting Close in the window s system menu The keyboard equivalent to this menu selection is Alt X or Alt F4 3 2 Edit Menu The Edit menu provides several functions that control the operation of toolbar scroll bars and status information displays It also includes the Undo function Each menu selection is described separately in the following sections 3 2 1 Undo The Undo menu selection nullifies the last operation This is very useful when you have made a slip of the mouse and wish to get back to where you were Selecting Undo a second time restores the ECU settings back to what they originally were The keyboard equivalent to this menu selection is Alt Backspace or you can press its toolbar button Depending on the setting described in the nex
49. usno Directory Path Cache 1 16 megs 4 Plot Non USNO Stars V Cancel This section of the dialog box controls all Hubble Guide Star Catalog HGSC settings For information about this stellar database which contains about 15 000 000 stars see section 4 1 Note that this database is not installed by default but rather there is a separate installer program see section 1 2 The Earth Centered Universe Pro V6 0 User s Manual Page 33 After configured and enabled see Active Star Databases above the HGSC stars are drawn whenever the field size is smaller than 5 degrees in vertical height This limit allows for a fast re draw time and a density of stars that is not overwhelming The following items relating to the HGSC can be configured however V6 0 users should not have to change any of these settings Most of these relate to earlier verions of ECU which contained the HGSC on a CD ROM they are left available so that users with an ECU or STSCI CD ROM can still use it a Access ECU CD ROM if checked the ECU CD ROM is accessed If it is not checked then only the data stored on your hard disk is used If you have copied regions of the sky on to your hard disk as described in sections 3 8 6 you should disable this check box to prevent further CD ROM accesses b Access STSCI CD ROM if checked the STSCI CD ROM is accessed If it is not checked then only the data stored on your hard disk is used If you have
50. variable and double stars deep sky objects planets sun moon comets asteroids grid lines targets and labels are displayed It also allows for various zoom settings see section 3 4 Orbits the orbits menu includes most functions related to comet and asteroid orbits see section 3 5 Center the center menu provides many ways to set the center of the sky display These ways include by a text search of the databases centering on a specified Right Ascension Declination a specified Azimuth Altitude a constellation a bright star a Messier object a named deep sky object a Solar System object or a point on the local horizon Also controlled in this menu is a feature that allows the sky display to be centered on a programmable list of objects or positions see section 3 6 Animation the animation menu controls the various features of the animation mode see section 3 7 Telescope the telescope menu includes all of the telescope control functions see section 3 8 Miscellaneous the miscellaneous menu provides access to various functions which didn t seem to fit well anywhere else These include the display of Sun Moon data and sidereal time and Julian date various Internet functions the settings for the Hubble Guide Star Catalog and the settings for various files and directories used by ECU see section 3 9 Help the help menu provides access to ECU s online manual various related websites and the program cred
51. will move the pointer by 4 minutes and pressing along the bar will move the pointer by one hour When sliding the scroll bars by dragging the pointer observe at the Right Ascension and Declination displays to know when to stop 2 Azim Alt The vertical bar is used to change the Altitude with reference to the local horizon 90 degrees is at the top the Zenith 90 degrees is at the bottom the Nadir Pressing the end arrows will move the pointer and the sky display by one degree and pressing along the bar will move the pointer by 10 degrees The horizontal bar is used to change the Azimuth with reference to the local horizon 0 degrees North is at the left 358 5 degrees is at the right Pressing the end arrows will move the pointer by 1 5 degrees and pressing along the bar will move the pointer by 15 degrees When sliding the scroll bars by dragging the pointer observe at the Azimuth and Altitude displays to know when to stop Toolbar seven groups of graphical buttons are provided for quick access commonly used functions Many buttons also represent the status of the function they represent For example if the grid button 16 from the left is highlighted the grid is currently being drawn if the grid button is mostly gray the grid is not being drawn Each button is described below in the order that they appear on the toolbar Note that as the mouse hovers over a toolbar button a hint regarding its function is displayed momenta
52. 1 3 1 5 Restore epes 21 3 1 6 Print EL EE 21 EELER ee Aere ee aiia 21 E Gilat Sel Diaconate ae enue 22 3 1 9 Set Printer FOntS EE 23 3 1 10 Save Object EDOM ages faze vocasenc vase dasdsenecardvenctanieeecestvereeaese 24 3 1 11 Report Settings EE 24 Be We E EE 25 SN e g E NEE 25 O72 lt NGO Soci ee EE Ee 25 3 2 2 Enable Multiple UndoS eege eege een 25 SZ FOG ID Ar EE EE 25 3 2 4 A towrap Toolbar iinne eege 25 3 2 5 Scfoll Bats BEEN 26 CA okoo RE ee EE 26 3 2 7 Track Coordinates 0 ccccccccccesesssesesseeseeseeseeeeesenseeseneueeenee 26 3 2 8 Faster DAS ee EE 26 3 2 9 Status Line O EE 26 Be Kn STATUS NS A E EEN 26 BZ MAING Sle BOA a a inihi 26 3 2 12 Small Status BOX EE 26 3 2 13 barde Slats E 27 3 3 Set MenU ander Scctachianbedohubihudtahathabnenaitibinnentabandd batanieincdushaeotndunsihuct 27 383 MME EE 27 3 3 1 1 Enter Local Time eo tege ee 27 3 3 1 2 Enter Universal TiMG icsiicccdssccsesdvecdseccsesdsecdveccsasdsaced 28 3 3 1 3 Use System Tme EEN 28 3 3 1 4 Set Time to System Tume 28 3 3 1 5 PC Clock is EE 28 3 3 1 6 Local Time Format EE 28 3 3 1 7 Re Lalin Le EE 28 3 3 2 Geographic Location EE 28 3 3 3 Sync Location or Time from GP 29 3 3 4 Solar System ere ee ee 30 3 3 4 1 High Accuracy CGalculatons 30 3 3 4 2 Precess to Sky Display 30 3 3 4 3 Nutanon 30 3 3 4 4 ADSI AON DE 30 3 3 4 5 Light Travel Time EEN 30 3 3 4 6 Observer s Parallax 30 3 3 5 Atmospheric Heirachon en 31 3 3 6 Set SKY Co
53. 6 1 On Database Search E 46 36 2 OMRADET roenn nan an notes ue EE sous EE eke ssuee neces 47 3 6 3 On AZ eeh ee 48 3 6 4 On Constellation Aide deed Seeerei haaceisctecacchaens 48 3 6 5 On Common Star Name nnnnnnnnnnennnnnenrrrnnnnnnrrnrnnnrnnnnnn ennenen 48 EE E Messier ODIGC es ceed iieii niei 49 3 6 7 On Named Kee 49 3 6 8 On Comet Asteroid nnnnnnnnnnnenrnnrnrtrrrrrrrrntrrrrrrnnnnnnnnn nnen 49 3 6 9 On Solar System RE 49 3 6 10 On Point on HO IZON snnnnnnnnnnnnnnnnnnnnnnnnnnnnnrrnnnnnnnnnnnnnn nnna 50 3 6 11 On Telescope Poston e 50 3 6 12 Search Only Enabled Databases ssssessesseeeseeeees 50 3 6 13 On Object From ebe EE 50 3 6 14 On Next Obert 50 3 6 15 On Previous Obiect EE 50 3 6 16 Select Object List File EEN 51 3 7 Animation UUM Di sid isa isos ad is Sata Sass eats aa aes sears a eds ed 51 E KEEN 51 EE Ee 52 3 7 3 Forward One Gienp EE 52 3 7 4 Reverse One Step ee 52 3 7 5 Restore Date VN ssi cs cc aes cass ed aca aa td eaten 52 EE lr eee ene ene Re etn eee ae 52 3 7 7 Trail Lines ON ipucaedidicuned deca et iducunedidecunebiducunedidecanediducunediduenss 52 S79 CIGAR WANS tee 52 3 7 9 RRE il e EE 52 3 7 10 Animation EE 53 3 7 11 Lock On Current RA Dec sssssssesesssssssssssssssssseeeeees 53 3 7 12 Lock On Current AziM Alt isssssssecssastenessswsenstsaetenessieseneeviete 53 3 7 13 On Comet ASterOid ENNEN 54 3 7 14 Lock On Solar System Obert 54 9 715 Time DIRECTION EE 54
54. Declination in the J2000 0 epoch d Component Identification when the group of stars has more than two stars this identifies which pair of a larger grouping this is For example a grouping of four stars might have three entries in the database with component identifications of AB AC and AD which in this case would mean that B C and D orbit star A e Magnitudes the magnitudes of the two components to the nearest hundredth f Separations the separation of the pair of stars in arc seconds at either one or two different years usually year of discovery and the year of the last observation g Position Angles the position angle in degrees of the pair of stars at either one or two different years usually year of discovery and the year of the last observation h Spectral Type the spectral type of one or both stars if known 5 Identify Objects The Identify Objects dialog box obtained by clicking near any object on the sky display with the left mouse button provides various information pertaining to the selected object Note that if the stars are not drawn with Auto Stellar Limit you will not be able to click on stars See section 3 4 3 for details If more than one object is in the vicinity the Next button will be highlighted and will indicate the number of remaining objects It can be pressed to update the dialog box with new information for the nex
55. Earth Centered Universe Pro V6 0 User s Manual Page 74 To setup an image viewer program to use with ECU see section 3 9 10 the Directory File Setup dialog box The location of the image files two locations on your computer are searched is also controlled by the user in the same Directory File Setup dialog box ECU looks for image files in a number of ways In the simplest form the name of the image files must be the same as the primary or other object name that appears in the Identify Objects dialog box for the object For example an image of the Moon would be called MOON GIF if the image were in GIF format Or an image of NGC7009 the Saturn Nebula would be called NGC7009 JPG if the image were in JPG format The filename used is usually exactly the same as the object s primary name however because of the restrictions on the naming of files imposed by Windows some names of objects may not work directly for example if the name contains letters such as or NV that are not allowed in filenames In these cases ECU creates a compatible filename automatically The easiest way to determine is the compatible filename is to use the Notes feature see section 5 3 since it uses the same algorithm There is also a more advanced way that ECU searches for image files This method searches for a file ending in txt a text file that the user creates with a text editor
56. L 1 Comments on GSC 1 1 revisions PLATES TBL 1 Information on the plates used in the GSC PROCESS TBL 1 Image processing parameters ASTR_CAL TBL 1 Parameters of astrometric calibrations PHOT_CAL TBL 1 Parameters of photometric calibrations C_UP_POP TBL 1 Catalog update population statistics ST_POP TBL 1 Population statistics for stars NS_POP TBL 1 Population statistics for non stars REGIONS TBL 1 Boundaries of GSC regions C_RE_POP TBL 1 GSC region population statistics LG_REG_X TBL 1 Index to large regions SM_REG_X TBL 1 Index to small regions XREF_P2R TBL 1 Cross reference table plates to regions XREF_R2P TBL 1 Cross reference table regions to plates 5 ACKNOWLEDGEMENTS The primary authors would like to thank the large number of persons who have participated in the Guide Star Selection System and the Guide Star Catalog developments over the past years In addition to the many people previously acknowledged we would like to thank the following who made contributions in GSC 1 1 E by collaboration in merging INCA data into GSC 1 1 Daniel Egret and the HIPPARCOS INCA and Tycho groups for providing astrograph plates for southern bright stars Geoffrey Douglass Robert Harrington G Monderen and Otto Richter E by contributing to the GSC 1 0 error discussion or by reporting specific errors in GSC 1 0 Batrice Bucciarelli Daniel Egret Holland Ford Peter Garnavich Roberto Gilmozzi Roberta Humphr
57. Object Labels 3 4 17 2 Use Fonts The Use Fonts menu selection toggles whether or not the font settings programmed in section 3 4 17 1 are to be used on the sky display If marked by a check mark the fonts will be used If it is not checked the Windows standard system font which may cause the sky display to draw more quickly 3 4 17 3 Increase Font Size by 20 The Increase Font Size by 20 menu selection increases by 20 the size of all screen fonts 3 4 17 4 Decrease Font Size by 20 The Decrease Font Size by 20 menu selection decreases by 20 the size of all screen fonts 3 4 18 Targets The Targets menu selection provides a sub menu allowing Field Targets comprising of up to three circles and two rectangles to be controlled Up to 100 Field Targets can be placed at arbitrary locations on the celestial sphere in addition to one more Target located at the center of the sky display The default Field Target can also be made to follow a telescope s position on the sky display see section 3 7 5 These are useful for showing the angular size on the sky observed in a telescope using a particular eyepiece or viewed by your photographic or CCD camera They can also be useful on printed charts to aid in star hopping to an object 3 4 18 1 Default Field Target The Default Field Target menu selection presents a dialog box allowing the user to enable and control the angular size of three circular and two rectangular fie
58. Save Object Report The Save Object Report menu selection generates and saves an Object Report to the file specified by the file name selected in the dialog box presented I will not detail the operation of this dialog box since it is identical to every other Windows application that has a Save As function The Object Report is generated based on the objects currently plotted on the screen in the sky display and the settings specified in the next section Note that if the Edit file afterwards setting is enabled the file generated will be automatically loaded into your specified text editor usually Notepad 3 1 11 Report Settings The Report Settings menu selection presents a dialog box allowing the user to control various settings of the Save Object Report feature which is used to generate detailed reports of objects displayed on the screen see section 3 1 10 or contained in printed charts see section 3 1 6 These detailed reports can be easily imported into spreadsheet or database programs such as Microsoft Excel and contain a variety of detailed information that varies by object type To load a file into Excel a select the Open from the File menu b change the file type to Text Files c select the Object Report file that you wish to load and press the Open button d the Text Import Wizard will be displayed e select Delimited and press the Next button f select either the Tab or C
59. Status the status of the object Some objects are classified as possible planetary nebulae or misclassified as a planetary nebulae 4 3 General Catalog of Variable Stars ECU includes the September 1 2010 version of the General Catalog of Variable Stars GCVS which is a catalog containing 41 639 variable stars It was compiled by a group of professional astronomers led by P N Kholopov at the Sternberg Astronomical Institute and the Institute of Astronomy Moscow Selected fields from the original GCVS database were extracted for use in ECU These fields are described below a Variable Designation the name of the variable star in the standard format which is comprised of two parts the designation usually one or two capital letters followed by a three letter constellation abbreviation b Position the object s position Right Ascension and Declination in the J2000 0 epoch c Maximum Magnitude the star s maximum magnitude to the nearest hundredth Also included for most stars is the photometric system used usually V for visual magnitude or P for photographic magnitude d Minimum Magnitude the star s minimum magnitude if known to the nearest hundredth In some cases the amplitude of variability is given instead of the minimum magnitude The Earth Centered Universe Pro V6 0 User s Manual Page 72 e Type of Variability a code describing the mechanism believed to cause the star to vary i
60. THE EARTH CENTERED UNIVERSE PRO Planetarium and Telescope Control Software operates with Windows 2000 XP Vista 7 32 and 64 bit User s Manual Version 6 0 Manual Revision January 2011 File Edit Set Field Orbits Center Animation Telescope Miscellaneous Help OI d Ska SA ORR Sw onre on TA Os 7 Menkalinan Bas NGC1647 NGC1746 S e Alina Basel Canada Halifax HS LMT 2011 01 09 08 00pm LTC 2011 01 10 00 00 RA 04 57 58 7 Dec 32 01 59 Field 24 00 Step 1 day Mag 7 5 10 0 Sky is dark Mo A Product of Nova Astronomics P O Box 31013 Halifax Nova Scotia Canada B3K 5T9 Phone 902 499 6196 Internet E Mail info nova astro com Website License Agreement If you the licensee have purchased a license to use the Earth Centered Universe Pro ECU the Software or upgraded from a previous version of the Software by sending Nova Astronomics the appropriate fee or by purchasing from a retailer and you are in possession of a registration number and license key you are granted a non exclusive license to install and use one copy of the Software on one computer for use by any one person at a time You are additionally permitted to install and use the Software on a second computer provided this second computer is owned by the licensee or used exclusively by the licensee for example a notebook computer used in the field or a computer used at your place of work and there is no pos
61. WARRANTIES IS NOT PERMITTED BY SOME JURISDICTIONS THE ABOVE EXCLUSION MAY NOT APPLY TO YOU Disclaimer of Liability IN NO EVENT WILL NOVA ASTRONOMICS LICENSOR AND ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS COLLECTIVELY NOVA ASTRONOMICS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE GSC EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU Nova Astronomics Licensor s liability to you for actual damages from any causes whatsoever and regardless of the form of the action whether in contract tort including negligence product liability or otherwise will be limited to US 50 TABLE OF CONTENTS Te G tting SUA OG 6s so css dais e e a aaa a a E a aE aa aiaa 8 1 1 System Ge tt EE 8 CMN DEE del EE ent CN 9 1 3 Starting ECU EE 10 PAM Ia e ET de NEE 11 2 1 The Status Information Display AE 11 22 ING SKY EHS 12 2 3 Mouse Operations en 13 2 3 1 Left Mouse ie EE 13 2 3 2 Right Mouse BUON E 14 29S SOM KEV oenn a 14 SEENEN eet 14 2 4 On Screen Controls E 15 2 5 Keyboard Quick Keys AE 18 3 MENU SCICCHONS a r r aa a aaa aaa tee udee eege ebe Zee et 19 3 1 let begiert eet beet eebe Meter eet eege 20 TEE eh 20 E A LW Eis havent tin ain eegene 20 E ME 20 EE 2
62. Wa TOM a Ee EE 64 4 Databases and CalCulations cccccccccceeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesseeeeeeeenees 65 4 1 Stellar Databases 0 0 cece cece cceeneeeeeeeeeeeeeeeeeaeeeeeeeeeeeeeeeeenneeeeeeeees 65 4 2 1 Yale Bright Star Catalog iccissceccctscccisadincssendansengedaadeinetdeame 65 4 2 2 Smithsonian Astrophysical Observatory Star Catalog 66 4 2 3 Tycho 2 Star Catalog EE 66 4 2 4 Hubble Guide Star Catalog cccccccecceeeeeeeeeeeeeeeeeeeeeeneees 66 4 2 5 US Naval Observatory Star CGatalogs 67 4 2 Deep Sky Databases EE 67 4 2 1 Saguaro Astronomy Club Database 68 4 2 2 Principle Galaxy CGatalog AAA 71 4 2 3 The Wallace SEC Catalog of Galactic Planetary Nebulae 72 4 3 General Catalog of Variable Stars 0 cceceeceeeeeeeeeeeeeeeeeeeeeeteeeeeeeeees 72 4 4 Washington Visual Double Star Catalog 73 S Jgenttt Objects iiien nananana nanenane anad aneneen ean aanere nadani anatek 73 5 0 Information EE 73 5 2 Viewing Biet Te EE 74 SS Note Sina hee eh etre a eege 75 5 4 Internet Eet tactic cede crete tes teeceteete ee a a a deuiuad 76 5 5 Other BUMONS 2 cc tesect ccd iced ntsc bcd ee Eeer 76 6 Using ECU s Telescope Interface Functions een 76 6 1 Using a GOTO Type Telescope With ECH 77 6 1 1 Initial Set Eege testis eener eee eege 77 6 1 2 Enabling the Telescope Interface 77 6 1 3 Using the Telescope Interface AAA 77 6 2 Using an Encoder Interface With ECH 78 6 2 1 WEE ee 78 6 2
63. an line field IV Horizon Galactic Equator targets zenith point celestial pole points galactic equator line galactic pole T SustomHorizon LE points and the center of the chart J Meridian J Chart Center Cancel 3 4 14 Custom Horizons The Custom Horizons menu selection presents a dialog box which allows the user to set the profiles of up to four custom horizons and to select which one is active These profiles are intended to represent your local horizon considering obstructions buildings trees etc at your observing sites The dialog box shows a graph represent 0 to 350 degrees of azimuth from North at 10 degree steps To set a horizon profile first select one of the sites Site 1 to Site 4 then put the mouse cursor over the graph Press and hold the left mouse button as you drag it across the graph to set the horizon profile You can do this as many times as you wish until the profile is set as Custom Horizons N E 5 J Azimuth desired Drag the mouse over the Active Observing Location graph to set the horizon Stei Site2 C Site3 Site4 Cancel Select the active site by using one of the four Active Observing Location radio buttons To display the active site be sure to also enable the Custom Horizon in the Lines dialog box see 3 4 13 3 4 15 Labels The Labels menu selection presents a dialog box which allows the user to control most of the text labels shown on the sky displa
64. and time zone of a location of your choice To select a pre programmed location use the scroll bar controlled list box on the left side of the dialog box to bring the desired location into view and click on it with the mouse Its place name latitude longitude and time zone will be displayed on the right side of the dialog box Press OK to use this location The Earth Centered Universe Pro V6 0 User s Manual Page 28 To add a new location enter a place name latitude longitude and time zone on the right side of the dialog box The latitude is entered as degrees North is positive South is negative and minutes The longitude is also entered as degrees West of the prime meridian is positive East is negative and minutes The time zone is entered in hours West of UTC the time of the Greenwich meridian enter a negative for the Eastern hemisphere At this point if you press the Add button the new location will be added to the geographic location database Pressing Save will save the database and use this new location If an error is detected when adding or saving a beep will sound and the cursor will be placed at the offending field To delete a location from the database select it in the list box then press the Delete button To finish press the Save button to save the database Enter Geographic Location Canada Calgary AL Canada Charlottetown PEI Canada Collingwood ON Canada Corne
65. arched by entering its Smithsonian Astrophysical Observatory SAO catalogue number with the prefix SAO its Yale number with the prefix HR or its Henry Draper HD catalogue number with the prefix HD For example to find the SAO star number 49898 enter SAO49898 Note that entering sao 49898 would be just as effective because the case of the input and spaces are ignored When searching for SAO stars if a search of the brighter YBSC database is unsuccessful the search continues using the SAO database Hubble Guide Stars are searched by entering the GSC prefix the region number 5 digits and star number 5 digits separated by spaces for example GSC 00057 00050 US Naval Observatory stars cannot be searched Stars by Bayer Letter the brightest stars in the Yale Bright Star YBSC database can be searched by their Bayer Letter designation A prefix of B is used plus a three letter abbreviation for the Greek Letter and then finally the three letter standard abbreviation for the constellation For example to search for Beta Bootes b bet boo would be entered Capitalization and spacing are not important Stars by Flamsteed Number the brightest stars in the Yale Bright Star YBSC database can be searched by their Flamsteed Number A prefix of F is used plus the Flamsteed number and then finally the three letter standard abbreviation for the constellation For e
66. ave been properly resolved but then affected by a centroider defect that made the separations artificially small Such components of blends with incorrect separations are given a classification of 2 blend cf the text file for a full listing of the codes For stars with V lt 8 image processing artifacts near the diffraction spikes exist in GSC 1 0 In GSC 1 1 potential artifacts were identified by use of a purely geometrical criterion proximity of the object to the spike and were assigned a classification of 5 Small areas around southern stars brighter than V 3 are not processed from the Schmidt plates and were left blank in GSC 1 0 For these GSC 1 1 contains entries from supplemental astrograph plates taken with the GPO Gran Prisma Objectif telescope on La Silla and the astrograph at the Black Birch Observatory BBO in Blenheim New Zealand Because of their smaller fields the photometric and astrometric calibrations of data from most GPO and a few BBO plates were performed against nearby GSC entries based on the Schmidt plates A number of specific errors in GSC 1 0 have been identified by the user community and by analyses of HST operational problems These generally involve naming errors plate flaws misclassifications and multiple stars most are individually corrected in GSC 1 1 Also the photometric error parameter in GSC 1 1 is now correctly described by equation 3 in Paper II i e the erratum of footnote 5 therein is no lo
67. be only observable from certain locations on the Earth s surface It is very important that this selected be enabled when simulating solar eclipses or other astronomical phenomenon where the observer s geographic location is important The Earth Centered Universe Pro V6 0 User s Manual Page 30 Note that presently comet and asteroid orbits are not corrected for Observer s Parallax even when this setting is enabled This correction is usually neglible except for asteroids that are making a very close approach to Earth 3 3 5 Atmospheric Refraction This menu selection controls whether the local horizon line local horizon grids Azimuth and Altitude displays and Rise Set calculations are to be corrected for the effects of Atmospheric Refraction Atmospheric Refraction causes an object to appear higher in the sky that it actually is The bending or refraction of light as it passes through the Earth s atmosphere causes this effect 3 3 6 Set Sky Colors The Set Sky Colors menu selection presents a dialog box allowing the user to set the colors used to draw the sky display The dialog box contains five radio buttons one combo box one checkbox and three scroll bars When drawing the sky display ECU subdivides the process into many different elements These include elements such as constellation lines the sun galaxies etc Set Colors The radio buttons are mutually exclusive such that only one can be active at a
68. box allowing the user to enter the vertical size in degrees of the ECU sky display The valid range is 0 1 to 180 degrees Field Size Vertical Field Size 0 1 x B to 180 degrees This menu selection can also be activated by pressing the left mouse button while the mouse is in the box which displays the current Field Size in the status line or but using its toolbar button 3 4 20 Zoom The Zoom menu selection presents a sub menu allowing the sky display to be Zoomed in or out to a variety of field sizes These include Zoom In Full keyboard equivalent is Shift Z which zooms in to the minimum allowable field size 0 1 degrees 15 degrees 45 degrees 90 degrees and Zoom Out Full keyboard equivalent is Alt Z which zooms out to the maximum allowable field size 180 degrees 3 5 Orbits Menu The Orbits menu provides access to all features relating to the comet and asteroid orbit databases Each menu selection is described separately in the following sections 3 5 1 Define Orbits The Define Orbits menu selection presents a dialog box allowing the user to select one of the 5 000 comets or asteroids whose orbit you wish to change or define If the comet or asteroid has already been named it name will be shown otherwise its number will be shown Select the desired comet or asteroid and press OK or press Cancel to abort the dialog box Define Orbits 1 Ceres EK j 2 Pallas E 3 Juno Cancel 4 Vesta a 5
69. ckwise g Radial Velocity the radial velocity of the galaxy compared to the Sun ECU also computes the implied distance to the galaxy using the Hubble relationship assuming a Hubble constant of 75 km s per megaparsec h Status the status of the galaxy is identified as either a Galaxy or Probable Galaxy 4 2 3 The Wallace SEC Catalog of Galactic Planetary Nebulae ECU includes the Strasbourg ESO Catalog of Galactic Planetary Nebulae with additional value added for the amateur observer by Kent Wallace based on his own observations and the observations of other experienced observers Included is database version 7 July 15 2005 which includes 1143 objects For information about this catalog see www blackskies org SEC_data00 htm Selected fields from the original Wallace SEC database were extracted for use in ECU These fields are described below a PK Object Name the name of the object in the Perek amp Kohoutek planetary nebulae catalog b PNG Object Name the name of the object in the PNG planetary nebulae catalog c Other Object Name the name of the object in other catalogs usually the NGC or IC catalogs d Position the object s position Right Ascension and Declination in the J2000 0 epoch e Magnitude the object s brightness to the nearest tenth if known f Size the size of the object in minutes and or seconds if known Some object sizes are just reported as stellar g
70. cope Geographic Location see section 3 8 12 menu selections for Meade LX200 and other similar telescopes Note that with the Astro Physics GTO mount the initialization procedure sets both the time and location so it s important that ECU s location and your computer s time are both set correctly o D To disable the telescope interface just select the Enable Telescope Interface menu selection again or press its tool bar button 6 1 3 Using the Telescope Interface Once enabled see section 6 1 2 the telescope interface is quite easy to use Several functions are provided each is described below The Earth Centered Universe Pro V6 0 User s Manual Page 77 1 Position Display if the menu selection Show Position see section 3 8 4 is enabled an indicator will be drawn on the sky display at the position which the telescope is pointed to and will follow it in real time If the menu selection Track Telescope see section 3 8 7 is enabled and the telescope position moves out of the sky display it will be re drawn with the current telescope position at the center of the sky display You should also read about the Auto Track Telescope feature in section 3 8 8 The type of indicator displayed depends on the state of the menu selection Use Default Field Targets see section 3 8 5 If checked the position display will be the programmable field circles or rectangle as described in section 3 4 18 1 If not checked a fixe
71. copied regions of the sky on to your hard disk as described in sections 3 8 6 you should disable this check box to prevent further CD ROM accesses Each STSCI CD covers about one hemisphere of sky so you will have to insert the CD ROM in the drive that covers the area of sky you are interested in c Plot Non HGSC Stars if checked the non HGSC stars Yale SAO and Tycho 2 are plotted in addition to the HGSC stars The feature is provided because V1 0 of the HGSC CD ROMs published by The Space Telescope Science Institute STSCI did not include stars brighter than magnitude 7 If you have the ECU CD ROM or V1 1 of the STSCI CD ROMs this item should not be checked d Cache to Hard Disk if checked data read from the CD ROM is copied cached to your hard disk for faster future access e STSCI CD Drive set this item to the drive letter of your CD ROM drive where you will insert the STSCI CD ROM usually D or E f Cache The HGSC is divided into over 9000 regions of the sky This entry determines how many of these regions will be cached in memory Values from 4 to 128 regions can be entered If you have a lot of memory in your system it is recommended that higher numbers be used g ECU CD Path set this item location of the HGSC files on your ECU CD ROM This setting will normally be set correctly during installation of ECU h Cache Path set this item location where HGSC cache files are to be stored
72. cribed in this manual include the user object label constellation lines and borders and geographic location databases For information about the format of orbit comets and asteroids databases see sections 3 5 1 and 3 5 8 ECU uses the algorithms described in the book Astronomical Algorithms by Jean Meuss published by Willman Bell Inc for all of the high accuracy solar system calculations and most other astronomical calculations as well These high accuracy positions of the planets and the Sun see section 3 3 4 1 are derived from the planetary theory VSOP87 see Planetary theories in rectangular and spherical variables VSOP solutions by P Bretagnon and G Francou Astronomy and Astrophysics 202 309 315 1988 The time span validity of these positions is about 2000BC to 6000AD Beyond this time span positions may be unreliable The high accuracy positions of the Moon are derived from the lunar theory ELP2000 see The lunar ephemeris ELP 2000 by M Chapront Touze and J Chapront Astronomy and Astrophysics 124 50 62 1983 The low accuracy solar system calculations are mostly from the book Practical Astronomy with your Calculator by Peter Duffett Smith These should not be used except when using very old slow computers and are not accurate more than a few decades from the present time 4 1 Stellar Databases ECU includes four stellar databases the Yale Bright Star Catalog YBSC
73. ction 3 8 1 or press its button on the tool bar If no error messages were displayed the telescope interface should be functional If an error occurs either when enabling the telescope interface or in subsequent operations an ECU Status window will appear providing a detailed error message provided by the driver If you cannot solve ASCOM related problems yourself first ensure that everything works properly using the telescope or focuser simulator drivers If they work fine then join the ASCOM group on the Internet see groups yahoo com group ASCOM Talk to resolve what is most likely a driver issue If the simulators don t work properly then contact Nova Astronomics for assistance To disable the telescope interface just select the Enable Telescope Interface menu selection again or press its tool bar button 6 3 3 Using the Telescope Interface Once enabled see section 6 3 2 the telescope interface is quite easy to use The capabilities of each telescope focuser and its associated driver determine which telescope functions described below is available to you 1 Position Display if the menu selection Show Position see section 3 8 4 is enabled an indicator will be drawn on the sky display at the position which the telescope is pointed to and will follow it in real time If the menu selection Track Telescope see section 3 8 7 is enabled and the telescope position moves out of the sky display it will be re dra
74. d on or off When the right mouse button is pressed over this button the dialog box that sets the magnitude limits see section 3 4 3 is accessed Double Stars When the left mouse button is pressed over this button the display of variable stars is toggled on or off When the right mouse button is pressed over this button the dialog box that sets the magnitude limits see section 3 4 3 is accessed Solar System When the left mouse button is pressed over this button the display of solar system objects is toggled on or off When the right mouse button is pressed over this button the dialog box controlling the planets see section 3 4 8 is accessed Grid When the left mouse button is pressed over this button the display of the coordinate grid cycles through showing the equatorial aligned to right ascension and declination the local horizon aligned to azimuth and altitude grid and turning off the grid altogether When the the right mouse button is pressed over this button the dialog box controlling Custom Horizons see section 3 4 12 is accessed Lines When the left mouse button is pressed over this button the display of lines and points is toggled on or off When the right mouse button is pressed over this button the dialog box controlling the display of lines and points see section 3 4 13 is accessed Labels When the left mouse button is pressed over this button the display of labels is t
75. d is centered on selected object 3 6 14 On Next Object The On Next Object menu selection centers the sky display on the next object in the currently selected Object List file see section 3 6 16 The keyboard equivalent to this menu selection is Ctrl N 3 6 15 On Previous Object The Earth Centered Universe Pro V6 0 User s Manual Page 50 The On Previous Object menu selection centers the sky display on the previous object in the currently selected Object List file see section 3 6 16 The keyboard equivalent to this menu selection is Ctrl P 3 6 16 Select Object List File The Select Object List File menu selection presents a standard file open dialog box allowing the user to select an Object List file Object List files are text files that contain lists of objects that can be searched in the database the same way that is described in section 3 6 1 Object List files have the extension obt by default and are easily created and edited using the Windows Notepad program A sample file is shown below an example object list file M31 the andromeda galaxy NGC7331 HR 345 Albireo a nice double star 5 54 34 45 RA 5 54h Dec 34 45d All lines beginning with a semi colon are ignored that is they are comments If a semi colon occurs on an object line the rest of the line is consider a comment and is ignored Lines beginning with a character are used to specify a position in right ascension and d
76. d Nova the positions of a comet for which you don t have the orbital parameters or include a database of objects not provided with ECU The positions type magnitude and a comment for up to 50 000 new objects are stored in up to five ordinary text files specified by the user in the Directory File Setup dialog box see section 3 9 10 ECU is provided with a sample user object file called nearby ecu which includes all stars within 25 parsecs about 81 light years of the Sun By enabling this database and turning off the normal star database the sky sure looks different The first thing that becomes evident is that most of the nearby stars are quite faint and all but a few of the familiar constellations disappear Important Note A large variety of user object files have been created or are maintained by ECU user Michael Cook of Ontario Canada These are available for download from the Internet See the link at the Nova Astronomics support website To create your own user object file use the following guidelines The user object file can be created in any text editor such as the Windows Notepad Each object occupies one line in the file Each line has 7 entries each separated by a space as follows The Earth Centered Universe Pro V6 0 User s Manual Page 35 a Object Type this 1 field contains a number from 0 to 17 that defines the object type that ultimately controls the symbol used to display t
77. d Toolbar and Status Line changes just the toolbar and status line colors to black and shades of red this feature is useful when ECU is being used at the same time as another program that has a night vision mode Important Note Your success in using the two Night Vision modes depends on the version of Windows you are using and the currently set theme Some themes make it impossible for applications like ECU to change the colors of all windows display elements In our experience the simpler the theme the better night vision saving experience you will have The colors of individual sky display and printed chart drawing elements are controlled by first selecting the element from the drop down pick list in the top left of the dialog box Pressing the down arrow will cause a pick list to be displayed with a scroll bar on the right hand side Using the scroll bar simply select the drawing element whose color you wish to change with the mouse The three horizontal scroll bars on the right side of the dialog box will be set to the color of the selected drawing element and the actual color is shown in a box beneath the scroll bars In Windows colors are represented by their equivalent red green and blue proportions To change a color drag the positions of the three scroll bars until the desired color is shown The number of different colors that can be produced varies considerably ranging from 16 to about 16 million colors w
78. d Universe Pro V6 0 User s Manual Page 44 criteria is described below a Search text in orbit name this criterion compares the name of the object with the text entered If the text entered is contained within full name or a subset of the orbit name then the object is selected This comparison is case insensitive b Include only numbered asteroids this criterion limits the search to numbered asteroids Practically this just limits searches to orbits with names beginning with a character which is the common way numbered asteroids are named c Faintest magnitude this criterion selects only objects whose magnitude is brighter than the value entered d Brightest magnitude this criterion selects only objects whose magnitude is fainter than the value entered e Minimum Solar Elongation this criteria selects only those objects whose angular distance from the Sun is greater than the value entered in degrees f Maximum Earth Distance this criterion selects only those objects that are closer to the Earth than the value entered in astronomical units g Minimum Altitude This criterion selects only those objects that are higher above the local horizon than the value entered in degrees h Equatorial Position this criterion selects only those objects in a region specified in the sky by right ascension hours and declination degrees coordinates 3 5 10 Download Orbits The Download Orbi
79. d on different models of telescopes ECU provides a Test Mode activated by the its check box that can be used to experimentally determine if the direction of each encoder needs to be reversed Connect the RS232 cable between the telescope and your computer and turn on the encoder interface After you have enabled the Test Mode select the Enable Align Encoder Interface menu selection When the Align Altitude Encoder dialog box is displayed press the 1 Star button As you move your telescope its Azimuth Azim and Altitude Alt will be displayed in a small window in real time The Azimuth angle or the RA angle for an equatorially mounted telescope should increase as the telescope is moved counter clockwise as viewed from above The Altitude angle or Declination angle for an equatorially mounted telescope should increase as the telescope is moved up or to the north If either of these motions is incorrect reverse the corresponding Reverse Direction check box in the Encoder Interface Settings menu selection and test it again The Test Mode can also test the encoder resolution settings Verify that the azimuth readings move smoothly from 0 through 360 for one complete rotation of the telescope and that the altitude readings move through a span of 90 as the telescope is moved one quarter of a turn When finished with the Test Mode be sure to disable it Save the settings permanently by using th
80. d size cross hair is used 2 Coordinate Display if the menu selection Show Coordinates see section 3 8 6 is enabled a window will be visible which displays the real time equatorial coordinates of the telescope 3 Manual Telescope Control if your telescope supports manual control and the menu selection Telescope Control see section 3 8 9 is checked a window will be visible which allows manual control of the telescope motions and focus 4 Slew to Object the user can instruct the telescope to automatically slew to an object in the sky by first selecting the object from the sky display with the left mouse button and then pressing the Center Scope button from the Identify Object dialog box Some telescopes will not move if the object is below the local horizon or a limit imposed by the telescope and an error message will be displayed otherwise the telescope will slew to the object You can also limit the motions of telescope using user defined Telescope Goto Limits see section 3 8 20 You can also slew to the position occupied by the center of the sky display by using the menu selection Move Telescope to Chart Center see section 3 8 2 5 Synchronize Telescope the user can instruct the telescope to re synchronize its current coordinates to known coordinates This improves the pointing accuracy of the telescope The usual procedure is to first use the slew function see item 4 above to find an object Due to various
81. d the page size and orientation portrait or landscape can be set All changes to the printer s settings remain in effect until ECU is terminated Print Setup Printer Name HP Lasenet P1505 X Properties Status Ready Type HP LaserJet P1505 Where USB001 Comment Paper Orientation Size Letter v Portrait Source Auto Select x C Landscape Network OK Cancel Nowo Cea 3 1 8 Chart Setup The Chart Setup menu selection presents a dialog box allowing the user to customize the appearance of the printed star charts Chart Setup General Settings Border inches Split Chart Settings Standard Title Left 0 625 Enable C Custom Title Right 0 625 Main Chart Size 50 Your Title Here vi Secondary Chart Top 0 625 Field Size Height 5 0 Iw Title Box in Degrees Bottom 0 625 V Legend Box Auto Place Labels Iw Use Fonts Print in Color Save Object Report Symbol Scale Factor 1 00 Legend Notes first 7 lines are used Cancel a General Settings The title line of the chart can be customized by selecting the custom title radio button and entering new title text below it The title box which shows the chart title time geographic location and other data can be enabled or disabled by using the Title Box check box The legend box which shows the symbols used for stars of different brightness and deep sky objects of different types can be enabled or disabl
82. d to support the development and distribution of this software The Earth Centered Universe Pro V6 0 User s Manual Page 91
83. de menu selection provides a sub menu allowing the mode of the scroll bars to be set If RA Dec is selected the scroll bars are used to move about the celestial sphere using Right Ascension and Declination coordinates If Azim Alt is selected the scroll bars are used to move about the local sky display using Azimuth and Altitude coordinates A check mark marks the current setting 3 2 7 Track Coordinates The Track Coordinates menu selection controls whether the coordinate displays Right Ascension Declination and Azimuth Altitude match the mouse position checked or the center of the sky display unchecked Holding down the control key also causes the coordinates to match the mouse position 3 2 8 Faster Drags The Faster Drags menu selection controls whether certain elements of the sky display are momentarily turned off when the sky display is dragged by the user as they hold down the shift key see section 2 3 3 The elements turned off include the coordinate grid most text labels and the object trails 3 2 9 Status Line On The Status Line On menu selection controls whether the status line a line of status text placed just below the sky display is displayed or not If a check mark precedes this menu item the status line will be displayed See section 2 1 for details on the contents of the status line 3 2 10 Status Line The Status Line menu selection presents a dialog box allowing the user to sel
84. diately cause the sky display to pop back to the location of the telescope With Auto Track Telescope turned on and a center object operation occurs the Track Telescope feature is momentarily turned off It is turned back on automatically when a center scope operation is initiated This will cause the sky to once again follow the scope if it moves outside of the sky display 3 8 9 Telescope Control The Telescope Control menu selection is a toggle that determines if the telescope control window is displayed This window is used to manually control the motion and focus position of a telescope that supports one or both of these features e g the Meade LX200 For some telescopes other control features are provided Unpark ASCOM Telescope Control Set Park The specific descriptions here are for the Meade LX200 type telescopes however other telescopes operate in a similar fashion The dialog box is initially positioned at the lower right corner of the Ee sky display It can however be moved by the user The example dialog box shown at right is for 7 pooo the ASCOM type telescopes Telescope Tracking r r Six radio buttons are used to select the speed at which the telescope moves or the focus motor speed The first four Slew Find Center and Guide control the speed at which the telescope moves the speeds depend on the specific telescope model and settings For the Meade Classic LX200 it ra
85. ds be carried out once and is only necessary when using a JMI SGT MAX firmware version of 1 70 or later or an Orion Sky Wizard CTI encoder interface Both the SGT MAX and CTI are essentially the same device however they act differently depending on their firmware version You may have to open the device to determine the version number it is written on the label of the largest chip For versions of the SGT MAX earlier than V2 00 you should select JMI SGT MAX before V2 00 as the telescope interface type in Telescope Type and General Settings see section 3 8 15 For versions 2 00 and later and all versions of the Orion CTI select Orion CTI amp JMI SGT MAX V2 00 and later Before selecting this menu item enter the actual encoder resolutions for each telescope axis altitude declination and azimuth right ascension into the dialog box provided by the menu item Encoder Interface Settings see section 3 8 16 and press OK Then select this menu item to program the encoder interface If an error message is displayed check your connections and make sure the encoder interface is turned on When using a version of the SGT MAX earlier than V2 00 only continue by entering the values 32768 for both resolution entries in the menu item Encoder Interface Settings and press OK This older version of the SGT MAX automatically scales the encoder values up to 32768 3 8 14 Select Alignment Stars The
86. e and Other CO ms O jo If zoomed in close enough many objects those whose sizes are known will be displayed at their correct size compared to the background stars Galaxies are displayed according to their correct size shape and orientation g Variable Stars variable stars are displayed using the standard symbol which is a varying sized solid dot within a hollow dot There are five sizes used according to the star s expected maximum brightness if known The 5 magnitude bands used are brighter than 277 magnitude 2 to 5 5 to 8 8 to 11 and fainter than 11 magnitude Those with unknown magnitudes are displayed using the smallest symbol h Double Stars double stars are displayed using the standard symbol which is a varying sized solid dot with a horizontal line through it There are five sizes used according to the pair of star s combined brightness if known The 5 magnitude bands used are brighter than 1 magnitude 1 to 3 3 to 5 5 to 7 and fainter than 7 magnitude Those with unknown magnitudes are displayed using the smallest symbol 2 3 Mouse Operations The mouse or other pointing device such as a touch pad or track ball forms a vital part of the ECU user interface and has many uses The cursor the shape of the mouse pointer is used to inform the user of how the mouse is currently being used If it is a cross hair it is used for selecting a window centering or measuring an angle If it is a targe
87. e Animation History menu selection presents a sub menu of the selections RA Dec and Azim Alt These selections control whether the animation history the previous positions is saved as the Right Ascension and Declination of the object or as its Azimuth and Altitude with reference to the local horizon The latter setting is useful for observing an object s path relative to the local horizon A good example of this would be to plot the positions of the planet Mercury as it passes through an eastern or western elongation and becomes visible in the evening or morning sky Beware however that the actual positions shown in the object trails except for the current position are not correct with reference to the background stars for the time shown Also this setting operates slowly because the computational overhead is higher A check mark will immediately precede current setting For normal use ensure that this setting is set to RA Dec 3 7 11 Lock On Current RA Dec The Lock On Current RA Dec menu selection causes the animation mode to be locked on the current Right Ascension and Declination In fact it turns lock mode off If locked on the current RA Dec a check mark will immediately precede this menu selection 3 7 12 Lock On Current Azim AIt The Lock On Current Azim Alt menu selection causes the animation mode to be locked on the current altitude and azimuth with respect to the local horizon This feature is very useful for
88. e File gt Save or File gt Save As menu selections 6 2 2 Enabling the Encoder Interface Prior to enabling the encoder interface you must first connect the RS232 cable between the telescope and the computer and turn on the encoder interface The encoder interface must be aligned using either one or two stars in the sky ECU uses these stars as reference points when translating the optical encoder readings into right ascension and declination The one star alignment process can only be used for equatorially mounted telescopes that are known to be accurately aligned on the celestial pole Otherwise the two star alignment process should be used Carefully select and enter your alignment star s into ECU according to the instructions in section 3 8 14 Select the Enable Telescope Interface menu selection see section 3 8 1 or press its tool bar button If you have aligned the encoder interface previously since running ECU you will be presented with a message box containing the question Encoder Interface has already been aligned use current alignment You can press the Yes button if you have not moved your telescope mounting or turned off your encoder interface otherwise press the No button Next the dialog box below will be displayed The telescope s altitude or declination axis must be aligned to either 0 or 90 whichever is convenient and the appropriate radio button pressed If you have performed this s
89. e of the valid range a dialog box is displayed with a message informing the user The Earth Centered Universe Pro V6 0 User s Manual Page 60 Telescope Goto Limits Declination I Use declination limits Max Declination degrees 90 00 Min Declination degrees 90 00 Use altitude limits Max Altitude degrees 90 00 Min Altitude degrees 5 00 Cancel This feature is very useful to those who wish to either restrict telescope motions to a minimum altitude or perhaps more importantly to limit how far north an SCT telescope is allowed to move some of these telescopes especially with CCD cameras attached can damage the telescope and or camera if there were allowed to move too far north 3 9 Miscellaneous The Miscellaneous menu provides access to all of the functions which did not seem belong anywhere else 3 9 1 Sun and Moon Data The Sun and Moon Data menu selection presents a dialog box which displays various useful data for the Sun and Moon on the current date An example dialog box is shown below Sun and Moon Data Yesterday 2011 03 29 Tomorrow Rise or Set Times Sun Rises at 06 01 Sets at 18 37 Day Length 12 36 hrs Night Length 11 24 hrs Nautical Dark 09 16 hours Astronomical Dark 08 04 hours Moon Waning Crescent Rises at 03 36 Sets at 14 05 Civil Begins at 05 32 Ends at 19 06 Nautical Begins at 04 57 Ends at 19 41 Astronomical Begins at 04 21 Ends at 20 17 Time
90. eclination in decimal format separated by a comma Several Object List files are provided with ECU MARATHON OBI lists of the messier objects in a convenient order for completing a messier marathon in March it is possible from northern latitudes to observe most of the 110 messier objects in one night FALL OBJ WINTER OBJ SPRING OBJ and SUMMER OBJ are four files contained the respective season s Herschel 400 deep sky objects 3 7 Animation Menu The Animation menu controls all of the functions of ECU s animation mode The animation mode is used to simulate astronomical events that are affected by changes in the time The animation mode has the following features a Time can be automatically stepped in any step from 1 minute to 4 years or any arbitrary number of minutes hours months days or years b Time can be stepped in either forward or reverse c The time between screen updates can be set from 0 to 60 seconds The maximum speed at which animations can run is dependent on the complexity of the sky display To optimize for the maximum frame rate turn off any objects and features you don t need eg deep sky objects grids un needed orbits labels etc You can experiment with how various elements affect the speed by enabling animation mode and turning things off and on d The solar system objects can be trailed with dots and or lines drawn behind them Text labels that include the date and or
91. ect which text status items are to be included on the status line For a description of each item see section Status Line 2 1 All those items checked will be included I Geographic Location Iw Local Time This menu selection can also be activated by pressing the left mouse button while the mouse E Universal Time is located in an unused part of the status line d Rt Ascension and Declination Altitude and Azimuth IV Field Size 3 2 11 No Status Box Iw Animation Step Iw Limiting Magnitude The No Status Box menu selection turns off the status box If a check mark precedes this IV Sky Darkness menu item the status box is off Pressing Ctrl S on the keyboard toggles between turning off Sidereal Time the status box and setting it to the large size Cancel 3 2 12 Small Status Box The Earth Centered Universe Pro V6 0 User s Manual Page 26 The Small Status Box menu selection sets the size of the status box see section 2 1 to the small abbreviated size If a check mark precedes this menu item the small status box will be displayed See section 2 1 for details on the contents of the small status box 3 2 13 Large Status Box The Large Status Box menu selection sets the size of the status box see section 2 1 to the large size If a check mark precedes this menu item the large status box will be displayed See section 2 1 for details on the contents of the large status box Pressing Ctrl S on the keyboa
92. ed by using the Legend Box check box The Earth Centered Universe Pro V6 0 User s Manual Page 22 The Use Fonts check box controls if the printer fonts programmed in Set Printer Fonts see section 3 1 9 are used to draw the chart If it is not checked the default font for the selected printer is used this may cause the chart to print more quickly When the Print in Color check box is checked charts are printed in full color using the same colors used on screen rather than only using black ink There are additional printer only colors for the border lines and legend and title box text See section 3 3 9 to customize the colors printed b Border The four border distances in inches can be individually set This in effect allows the chart size to be controlled This feature is very useful after disabling the title and legend boxes for making charts that can be pasted into other documents such as an astronomy club newsletter c Legend Notes The seven text boxes towards the bottom of the dialog box labeled Line 1 7 can be used to add descriptive text to the Notes section of the chart legend box d Save Object Report Checking this box causes an Object Report file to be generated based on the objects printed in the chart For details on this feature see section 3 1 11 Note that this report will usually contain a slightly different list of objects than a report generated by the Save Object R
93. election presents a dialog box allowing the user to search ere v Search text in orbit name through a database of orbital elements and to select orbits based on several criteria using ORBIT NAME the current date time and geographic location These selected orbits with either replace any orbits currently defined or append to the currently loaded database depending on the state of the Append New Orbits item in the Orbits menu see section 3 5 10 Note that the search stops when ECU s limit of 1000 orbits is reached Include only numbered asteroids Faintest Magnitude 17 00 Brightest Magnitude 0 00 Min Solar Elongation 0 00 The default database searched is the Lowell Minor Planet database translated into Max Earth Distance AU 9 00 ECU s orb format which is optionally installed when you install ECU This database Minimum Altitude oo includes more than 200 000 minor planets The top line in the dialog box shown below Equatorial Position indicates the orbit database being used To change the database used see section 3 9 7 North most Dec 90 00 South most Dec o9 00 Important Note West most RA 0 000 You can download updates to the Lowell Minor Planet database using the Download East most RA 23 999 Orbits feature see section 3 5 9 Cancel There are six criteria used for searching A check box precedes each criteria item Each The Earth Centere
94. ellation Camelopardalis 3 6 5 On Common Star Name The Earth Centered Universe Pro V6 0 User s Manual Page 48 The On Common Star Name menu selection presents a dialog box allowing the user to select the common star name to center the sky display on A list box is presented containing the available list of bright stars in alphabetical order The user is to select the desired star then exit the dialog box ECU then centers the sky display on the selected bright star 3 6 6 On Messier Object The On Messier Object menu selection presents a dialog box allowing the user to select a Messier Object to center the sky display on A list box is presented containing the available list of 110 Messier objects in numerical order The user is to select the desired object then exit the dialog box ECU then centers the sky display on the selected Messier object 3 6 7 On Named Object The On Named Object menu selection presents a dialog box allowing the user to select an object usually a deep sky object with a common name as opposed to a catalog number to center the sky display on A list box is presented containing the available list of objects in alphabetical order After the desired object is selected press the OK button and then ECU will center the sky display on the object ECU includes most of the deep sky objects with common names however you can add you own favorites to the list The list is stored in a plain text file
95. em objects from the sky display 3 7 9 Trail Settings The Trail Settings menu selection presents a dialog box allowing the user to control a number of parameters pertaining to the trail crosses and trail lines drawn behind Solar System Objects The following items are included in this dialog box a Number of Trails sets the maximum number of trail crosses and or trail lines The Earth Centered Universe Pro V6 0 User s Manual Page 52 b Label Interval set the spacing of the date time labels that can be drawn next to a trail cross or trail line intersection Adjusting this setting allows the user to control the amount of clutter caused by the date time labels c Trail Date Label this check box controls whether or not the date is included in the date time labels d Include only the Month Date checking this item eliminates the year from the date labels e Trail Time Label this check box controls whether or not the time is included in the date time labels f Include only the Hour checking this item eliminates the minutes from the time labels g Time displayed in UTC checking this item causes the date time labels to be in Universal Time rather than local time Trail Settings Number of Trails 10 to 500 200 Label Interval 1 to 10 5 Trail date label F Include only the month date Trail time label Iw Include only the hour Time displayed in UT 3 7 10 Animation History Th
96. ent Park commands move the telescope to The Earth Centered Universe Pro V6 0 User s Manual Page 82 ASCOM Telescope Control Unpark Set Park IT Telescope Tracking Iw Asynchronous Gotos Move Sei DD r The Telescope Tracking check box allows the tracking to be turned off or on The Asynchronous Gotos check box determines how telescope goto commands work If checked when goto commands are given the telescope will start to move and control is returned to ECU almost immediately If not checked then when goto commands are given ECU waits with an hour glass style mouse cursor until the goto operation is complete before regaining control Focus Mode is entered when its check box is checked The N and S buttons change to F and F meaning focus plus and focus minus To move the focuser enter the Focus Step size and press either the F or F button The Focus Temp Comp button enables or disables temperature compensation for focusers that support this feature Note that when temperature compensation is on focus motions are not allowed 4 Slew to Object the user can instruct the telescope to automatically slew to an object in the sky by first selecting the object from the sky display with the left mouse button and then pressing the Center Scope button from the Identify Object dialog box Some telescopes will not m
97. ent of Perihelion Longitude of Ascending Node Inclination Magnitude Parameter H Magnitude Parameter G and the Tail Length optional For a description of each entry see section 3 5 1 A sample asteroid entry follows 4544 Xanthus E A 2000 2004 00000 7 14 0000 336 27920 1 04206 0 2503710 333 68280 24 09080 14 14730 17 10 0 15 Each entry contains two lines The first line contains the name of the asteroid up to 25 characters The second line contains 14 entries of orbital data separated by a space in the following order Enable an E if the asteroid is enabled a D if it is disabled Orbit type always a A for a asteroid Epoch Year Month Date Mean Anomaly Semi Major Axis Eccentricity Argument of Perihelion Longitude of Ascending Node Inclination Magnitude Parameter H and Magnitude Parameter G For a description of each entry see section 3 5 1 3 5 8 Save Orbits The Save Orbits menu selection is used to save the currently loaded database of orbital elements It presents a dialog box allowing an orbital data file to be entered which is subsequently saved It defaults to file names with the extension orb The format of the file saved is specific to ECU see section 4 5 6 but is in ASCII format thus can be altered by any text editor such as the Windows Notepad 3 5 9 Search Orbits Search Orbits S i Using c program Files ecu6 lowell orb The Search Orbits menu s
98. ep Sky Magazine Astronomy magazine Sky and Telescope magazine and Burnham s Celestial Handbook are used as a source of some of these descriptions The descriptions use the abbreviations from the NGC and Burnham s They are given below The Earth Centered Universe Pro V6 0 User s Manual Page 69 remarkable object 1 very remarkable object Am Among N North Att Attached N Nucleus Bet Between Neb nebula nebulosity B Bright Pw paired with B Brighter P pretty before F B L or S C Compressed P Preceding C Considerably P Poor Cl Cluster R Round D Double Ri Rich Def Defined R not well resolved mottled Deg Degrees Ir partially resolved Diam Diameter Rrr well resolved Dif Diffuse S Small E Elongated S Suddenly E Extremely S South Er easily resolved Sc Scattered F Faint Susp Suspected F Following St star or stellar G Gradually V Very IF irregular figure Var Variable Inv Involved Nf north following Irr Irregular Np north preceding L Large Sf south following l Little Sp south preceding Mag Magnitude llm 11th magnitude M Middle 8 8th magnitude and fainter M Much 9 13 9th to 13th magnitude If you have never dealt with the NGC abbreviations before perhaps a few examples will help NGC Number Description Decoded Descriptions 214 pF pS IE gvIbM pretty faint pretty s
99. eport function which uses objects plotted on the screen e Split Chart Settings Checking the Enable check box enables the generation of split charts This feature prints two charts on one page The first main chart located on the top of the page in a portrait mode chart or on the left side of the page for a landscape mode chart is printed in the normal way as if there were no second chart printed The secondary chart is centered at the same sky position but is printed at the specified field size usually to produce a zoomed in chart of the same sky area The Main Chart Size setting specifies the percentage of the available page space that is used for the main chart The Secondary Chart Field Size setting specifies the field height in degrees for the secondary chart This setting can be smaller or larger than the main chart The Auto Place Labels check box is used to enable the auto placing of labels for the secondary chart This feature attempts to avoid the overlapping of text labels in crowded fields Note that the main Auto Place Labels setting in the Field menu is used to control this feature for the main chart f Symbol Scale Factor The symbol scale factor setting allows the user to increase or decrease the size of the star deep sky and other symbols drawn on the chart Printers of varying resolutions pixels per inch may produce higher quality output at values other than
100. er rates should only be used if you find the telescope functions slow down your PC too much or your telescope interface is unresponsive from its keypad When you select a telescope interface type an appropriate Update Delay is automatically selected for you The Port selection should be set to the RS232 port that you are using to connect the telescope interface to not applicable to ASCOM telescopes To avoid a conflict ensure that this port is not a port used by another device such as a mouse or a modem Note that an appropriate baud rate is automatically set when you select a telescope interface type so unless you know what you are doing don t change the automatically selected baud rate The Large Center Scope Box check box enables a feature that causes an extra large display of coordinates used by encoder interface and RA Dec type telescope to guide you to an object See sections 6 1 and 6 4 for more information Swap E W Buttons and Swap N S Buttons check boxes are used to swap the function of the directional buttons of the telescope control window see section 3 8 9 If checked the Disable Telescope After Multiple Errors setting causes the telescope interface to be automatically disabled after 10 successive unsuccessful attempts to query a telescope s position 3 8 16 Encoder Interface Settings The Encoder Interface Settings menu selection presents a dialog box used to set the resolu
101. es and the 1725 file means data for stars from 82 5 to 90 degrees ECU can handle any fraction of the whole database as long as both the index and data file for each zone is present To configure ECU to use the USNO star catalogs see section 3 4 4 4 2 Deep Sky Databases The Earth Centered Universe Pro V6 0 User s Manual Page 67 ECU contains three deep sky databases The first is a general database containing all types of deep sky objects called the Saguaro Astronomy Club database see section 4 2 1 The second is a specialized database containing only galaxies called the Principle Galaxy Catalog The third is a specialized database containing only planetary nebulae called the Wallace SEC Planetary Nebulae database 4 2 1 Saguaro Astronomy Club Database The Saguaro Astronomy Club database files MESSIER ECU SAC1 ECU and SAC2 ECU contains a complete database of 10342 deep sky objects The members of the Saguaro Astronomy Club SAC pronounced sa war oh of Phoenix Arizona have provided much of the effort to compile this database database version 8 1 March 2010 The database includes the entire NGC catalog the 110 object Messier Catalog plus many other interesting deep sky objects Selected fields of the SAC database were extracted for use in ECU The object positions are stored in integer format obtaining a resolution of about 10 arc seconds in Declination and 20 arc seconds in Right Ascension at the celestial equato
102. ess ECU s main and support websites You can check for a program update using the next selection It accesses a special website address where information about updates bug fixes etc will be posted About ECU presents a message box identifying ECU its version number its copyright notice and how to contact the author The Earth Centered Universe Pro V6 0 User s Manual Page 64 Willman Bell Credits presents a message box identifying that ECU contains source code that which is copyrighted by Jeffrey Sax The source code referred to provides high accuracy astronomical calculations based on the algorithms described in the book Astronomical Algorithms by Jean Meuss distributed by Willman Bell The message given in the message box is a requirement of distributing programs containing Jeffrey s source code And finally Other Credits presents a dialog box that recognizes the efforts of the many amateur and professional astronomers responsible for the preparation and maintenance of most of the databases used by ECU It also acknowledges certain trademarks and copyrights 4 Databases and Calculations This section describes the databases built in to ECU and the astronomical calculations used ECU contains many databases The databases covered in this section include the stellar see section 4 1 deep sky see section 4 2 variable star see section 4 3 and double star see section 4 4 databases Other databases not des
103. ete Disabled Orbits This menu selection deletes currently loaded orbits from the orbit database that are presently disabled 3 5 7 Load Orbits The Load Orbits menu selection is used to load orbital information for comets and asteroids It presents a dialog box allowing an orbital data file to be selected then subsequently loaded It defaults to file names with the extension orb The Earth Centered Universe Pro V6 0 User s Manual Page 43 The format of the file loaded is specific to ECU but is in ASCII format thus can be altered by any text editor such as the Windows Notepad ECU supports up to 5 000 comets and asteroids active at any one time referred to as Comet Asteroid 1 to Comet Asteroid 5000 When the file is loaded it will either replace any orbits currently defined or append to the currently loaded database depending on the state of the Append New Orbit item in the Orbits menu see section 3 5 11 A sample comet entry follows 2P Encke E C 2000 2003 00000 12 29 8787 0 33846 0 8473400 186 49900 334 58730 11 76960 11 50 15 00 Each entry contains two lines The first line contains the name of the comet up to 40 characters The second line contains 13 entries of orbital data separated by a space in the following order Enable an E if the comet is enabled a D if it is disabled Orbit type always a C for a comet Epoch Year Month Date Perihelion Eccentricity Argum
104. eys Mario Lattanzi William Owen Barry Rappaport Kavan Ratnatunga Larry Taff Patrick Wallace Fred Walter and Archibald Warnock BR for pre mastering the CD ROMs Ian Evans E and by making essential contributions to the project s infrastructure Marian Iannuzzi Greg McLeskey Dave Paradise Don Stevens Rayburn and Patty Trovinger Finally special thanks are due to Riccardo Giacconi Director of the Space Telescope Science Institute for his vision and continuing support of this project The Guide Star Catalog is partially based on data obtained at Palomar Observatory operated by the California Institute of Technology at the UK Schmidt Telescope operated by the UK Science and Engineering Research Council and by the Anglo Australian Observatory at the Cerro Tololo Inter American Observatory and the Sacramento Peak Observatory both operated by the Association of Universities for Research in Astronomy Inc under contract to the National Science Foundation and at the Mount Lemmon Observatory operated by the University of Arizona 6 REFERENCES Egret D Didelon P McLean B J Russell J L and Turon C Tycho Input Catalog Cross matching the Guide Star Catalog with the Hipparcos INCA Data Base Astron Astrophys 258 217 212 1992 Garnavich P The Stellar Angular Correlation Clues to Wide Binary Star Properties dissertation University of Washington 1991 The Earth Centered Universe Pro V6 0 User s Manua
105. f you have loaded a configuration file or started ECU made some changes to these configurations then subsequently changed your mind and want to start over at the last saved configuration 3 1 5 Restore Defaults The Restore Defaults menu selection sets all configuration settings to the system defaults If the special file default cfg exists those settings will be used instead of the permanent settings programmed into ECU In addition certain web site address default settings are read from the file default ini which is automatically updated whenever the user saves a configuration file named default cfg This feature is intended to allow the user to set his her own default settings which are likely to differ from the author s favorite settings since you probably don t live in Halifax Nova Scotia This selection should be used carefully since it changes all of the configuration settings at once and cannot be undone with the Undo feature see section 3 2 1 This includes the possible removal of all the comets and asteroids that you may have entered 3 1 6 Print Chart The Print Chart menu selection prints a high quality chart of the sky display on the printer selected and setup in Printer Setup The chart is printed with the same settings used to draw the sky display except for the fonts see section 3 1 9 The chart is printed in two formats In either format a title box can be printed at the botto
106. ffice ec gc ca astro index_e html The Earth Centered Universe Pro V6 0 User s Manual Page 62 The web address used to retrieve the data is set in the Directory File Web Setup dialog see section 3 9 10 By default the search radius is 50km but the technical user could change this value 3 9 6 Retrieve Weather Information The Retrieve Weather Information menu selection causes a web brower window to be displayed at the user s preset favorite weather website the default page is the weather information for the observatory of ECU s author You must be connected to the Internet for this feature to work The web address used can be set in the Directory File Web Setup dialog see section 3 9 10 A good website to use for obtaining weather information is www wunderground com the Weather Underground The web site you could use to retrieve current weather for Bangor Maine would be www wunderground com cgi bin findweather getForecast query Bangor 2C ME 3 9 7 Run Image Viewer The Run Image Viewer menu selection executes the image viewer program configured for use with ECU see section 3 9 10 3 9 8 Run Text Editor The Run Text Viewer menu selection executes a text editor program as can be configured for use with ECU see section 3 9 10 3 9 9 Read GSC Regions from CD ROM ECU V6 0 users should not have to use this dialog box It relates to earlier verions of ECU which contained the Hubble
107. formance Computing Systems Administrator at the Department of Astronomy and Physics at Saint Mary s University in Halifax Nova Scotia Canada Dave often appears in the local and Canadian national media covering astronomical topics of interest to the general public His primary astronomical interests are in variable star observing observatory automation CCD imaging deep sky observing and of course using computers and the Internet in Astronomy He built and operates the Abbey Ridge Observatory in his backyard see www davelane ca aro He also volunteers his time on a variety of projects of the Royal Astronomical Society of Canada RASC He was the national president of the RASC from 2008 2010 Dave holds the distinction along with Paul Gray of being the first Canadians to discover a supernova 1995F in NGC 2726 from within Canada this occurring in February of 1995 Earth Centered Universe was controlling the telescope used to discover the supernova He has since discovered three more supernovae 2005B 2005ea with Paul Gray and 2010It with Kathryn and Paul Gray Asteroid 117032 has been named Davidlane For his service and achievments the RASC has awarded Dave the Chant Medal Service Medal and Ken Chilton Prize twice The Chant Medal of the Royal Astronomical Society of Canada is the highest award for amateur contributions to astronomy in Canada Nova Astronomics is Dave s part time business which was primarily forme
108. functions After changing any of the settings in the Telescope sub menu remember to use the Save or Save As function to make these settings permanent This section of the manual serves only as a reference for the telescope menu selections See section 6 for detailed telescope interface operating instructions The Earth Centered Universe Pro V6 0 User s Manual Page 54 3 8 1 Enable Telescope Interface The Enable Telescope Interface menu selection initiates or terminates communication with the computerized telescope or interface box connected to your computer s RS232 port or controlled via an ASCOM AStronomy Common Object Model driver This menu selection can also be accessed using its toolbar button If an error occurs a message box will appear on the screen explaining the error The first possible error will occur if ECU cannot open the communications port If this error occurs make sure that you have selected a port that exists and is not in use by another program running on your system perhaps the mouse or modem The second possible error occurs if ECU cannot communicate with the telescope interface If this error occurs make sure the telescope interface is properly configured see sections 3 8 15 and 3 8 16 and is connected properly and turned on Some telescope interfaces also need to have their serial port enabled and in some cases be aligned before they will respond to commands from ECU If you are u
109. grees of the perihelion Longitude of Ascending Node Q the longitude in degrees of the ascending node Inclination of Orbit i the inclination of the orbit in degrees Epoch of the Elements the epoch of the elements either B1950 0 or J2000 0 Magnitude Constants the magnitude constants H and G are used to estimate the brightness of the comet or asteroid Each comet or asteroid has a different set of constants Comet brightness predictions are notoriously extremely unreliable Comet Tail Length the estimated length in astronomical units AU of the comet s tail Normally this value will be set to zero however if it s set to a value greater than zero ECU projects the tail onto sky display in the correct direction opposite the Sun and the correct projected length A good initial guess of a tail length is 0 1 AU Not used for asteroids m Enable Orbit this flag enables the orbit for display Define Orbit Orbit Type C Comet Asteroid 1 Ceres Date of Epoch Year 2011 00000 Date 8 0000 Month 2 156 36004 Asteroid Name Mean Anomaly M Semimajor Axis a AU Eccentricity ei Argument of Perihelion w Long of Asc Node omega 2 76541 0 0790083 72 52485 80 39175 Inclination of Orbit i 10 58663 Epoch of Elements C B1950 0 Ze 32000 0 G 0 72 ER not used For asteroids Cancel Magnitude Constants H 3 34 Comet Tail Length AU Iw Enable Orbit
110. have been made to the Guide Star Catalog GSC Version 1 1 to produce the Earth Centered Universe CD ROM that may make some information in this booklet slightly incorrect Details of these changes and other important information regarding the Guide Star Catalog are included in the text file README GSC located in the root directory of the ECU CD ROM THE GUIDE STAR CATALOG VERSION 1 1 An all sky astrometric and photometric catalog to support the operation of the Hubble Space Telescope Copyright c 1989 1992 The Association of Universities for Research in Astronomy Inc This set of two CD ROMs in the ISO 9660 format contains the Guide Star Catalog Version 1 1 with an issue date of 1 August 1992 The Guide Star Catalog GSC was prepared by the Space Telescope Science Institute ST ScI 3700 San Martin Drive Baltimore MD 21218 USA ST SclI is operated by the Association of Universities for Research in Astronomy Inc AURA under contract with the National Aeronautics and Space Administration NASA 1 INTRODUCTION The Guide Star Catalog GSC which has been constructed to support the operational need of the Hubble Space Telescope HST for off axis guide stars contains nearly 19 million objects brighter than sixteenth magnitude of which more than 15 million are classified as stars The original version of this catalog GSC 1 0 is described in a series of papers Lasker et al 1990 Russell et al 1990
111. he Magnitude Limits menu selection presents a dialog box allowing the user to individually set the limiting magnitude for stars deep sky objects variable stars double stars user objects comets and asteroids It also allows the size of the stars to be controlled The magnitudes are set by setting the scroll bars to the desired magnitude as displayed immediately to the right of each scroll bar If the optionally installed variable or double star databases are not present their magnitude scroll bars will be deactivated For stars the actual stellar limiting magnitude that results depends state of the Auto Stellar Limit check box If checked the stellar limit depends on the field size and the star databases presently enabled however the scroll bar sets the upper limit If not checked all stars in the database are drawn up to the limit set on the scroll bar However if the field size is greater than 45 degrees then only the Yale or brighter Tycho 2 stars are shown to magnitude 6 5 If the field size is greater than 5 The Earth Centered Universe Pro V6 0 User s Manual Page 32 degrees then only the Yale SAO and Tycho 2 stars are shown and not stars from the Hubble Guide Star Catalog or US Naval Observatory Catalog The negative side effect of the non Auto mode is that the sky display will take longer to re draw due to many more stars being drawn the stars cannot be identified clicked on with the mou
112. he object The number 0 is a star 1 is a galaxy 2 is a globular cluster 3 is an open cluster 4 is a nebula 5 is a planetary nebula 6 is an other type of deep sky object 7 is a solar system object 8 is an animation trail 9 is an open circle 10 is an X 11 is an open square 12 is star shaped 13 is a double star 14 is a variable star 15 is an open triangle 16 is an open diamond and 17 is blank no symbol b Right Ascension hours this is the object s right ascension hours epoch 2000 0 It can be an integer if used with the minutes see below or can be the decimal hours in which the minutes should be set to 0 c Right Ascension minutes this is the object s right ascension minutes which is used in conjunction with the hours see above d Declination degrees this is the object s declination degrees epoch 2000 0 It can be an integer if used with the minutes see below or can be the decimal hours in which case the minutes should be set to 0 e Declination minutes this is the object s declination minutes which is used in conjunction with the degrees see above f Magnitude this field is the magnitude of the object g Comment the last field is a text comment which would usually be the name of the object and can be up to 25 characters long To illustration the
113. he sky display will be flipped This selection is useful by itself to simulate what the sky will look like though a telescope which produces an upright but reversed image such as a refractor or Schmidt Cassegrain with a star diagonal installed Used in conjunction with Flip Vertical the sky display is drawn upside down and reversed left to right to simulate the view though a Newtonian telescope Pressing the left mouse button while over the Flip Horizontal toolbar button can also activate this menu selection and its keyboard equivalent is H Flip Vertical toggles whether or not the sky display is drawn as an upside down flipped top to bottom If marked by a check mark the sky display will be flipped If this selection is used in conjunction with Flip Horizontal the sky display is drawn upside down and reversed left to right to simulate the view though a Newtonian telescope Pressing the left mouse button while over the Flip Vertical toolbar button can also activate this menu selection and its keyboard equivalent is V 3 4 2 Display The Display menu selection provides a sub menu allowing the user to toggle the display of stars deep sky objects variable stars double stars solar system objects the grid lines lines and labels on the sky display The current state of each display setting is indicated by a check mark in front of the menu item Each of these items has an equivalent button on ECU s toolbar 3 4 3 Magnitude Limits T
114. he status line a hint regarding the button s function is displayed on the far right of the status line 2 5 Keyboard Quick Keys Most of the functions of ECU can be operated from the keyboard but the mouse interface is usually more efficient There are however many key combinations that speed up access to common functions These are listed below Alt O equivalent to File gt Open Alt S equivalent to File gt Save Alt A equivalent to File gt Save As Alt X equivalent to File gt Exit Alt F4 equivalent to File gt Exit Alt Backspace equivalent to Edit gt Undo Alt T equivalent to Set gt Time gt Set Local Time Alt N equivalent to Set gt Time gt Set Time to System Time the N stands for Now Alt U equivalent to Set gt Time gt Universal Time Alt G equivalent to Set gt Geographic Location Alt M equivalent to Field gt Magnitude Limits Alt P equivalent to Field gt Planets Shift T toggle the toolbar off and on Ctrl S toggle the status box off and on Page Up zoom out one step Page Down zoom in one step Alt Z zooms the sky display to full zoom out 180 degrees Shift Z zooms the sky display to full zoom in 0 1 degrees Ctrl F equivalent to Center gt Database Search find Shift M centers the sky display on the Moon Shift S centers the sky display on the Sun
115. hecked the non USNO stars Yale SAO and Tycho 2 are plotted in addition to the USNO stars This feature is provided because the USNO database is missing many bright stars and therefore is best used in conjunction with either the Tycho 2 or Yale SAO databases The Earth Centered Universe Pro V6 0 User s Manual Page 34 3 4 5 Color Stars The Color Stars menu selection toggles whether or not stars are displayed as white or in an exaggerated color based on either a star s color index B V or spectral type Ten unique colors are used to represent the B V and spectral type range from less than 0 25 O type hot blue stars to greater than 2 5 S type very red stars This feature is available for stars in the Yale Bright Star SAO and Tycho 2 catalogs 3 4 6 Deep Sky The Deep Sky menu selection presents a dialog box which has eleven check boxes in two groups Pressing the right mouse button while over Deep Zo the deep sky toolbar button can also activate this menu selection Bret ee Ke IV Galaxies SAC Messier F Unknown Magnitudes The first group Object Types provides 8 check boxes which select the Galaxies PGC Draw only Messiers types of deep sky objects are displayed one for each of Galaxies from the SAC Messier databases Galaxies from the PGC database Globular Clusters Open Clusters Bright Nebulae Planetary Nebulae from the Bright Nebulae Iw Dashed Open Clusters SAC Messier databases
116. hen finding an object Likewise if you have a Micro Guider IIT its built in sound will be used if MGI Sound is checked 3 8 17 ASCOM Telescope Setup This menu selection allows you to select and configure an ASCOM telescope driver Use the drop down list to select a telescope driver then press the Properties button to appropriately configure the driver this process is not described here since every driver is configured differently It is best if the telescope is connected and turned on since some drivers do attempt to communicate with the telescope during the configuration process After configuring the driver press the OK button The Earth Centered Universe Pro V6 0 User s Manual Page 59 ASCOM Telescope Chooser Select the type of telescope you have then be sure to click the Properties button to configure the driver for your telescope Simulator x Properties Click the logo to learn more OK about ASCOM a set of standards for inter operation of astronomy software Cancel 3 8 18 ASCOM Focuser Setup This menu selection allows you to select and configure an ASCOM focuser driver Use the drop down list to select focuser driver then press the Properties button to appropriately configure the driver this process is not described here since every driver is configured differently It is best if the telescope or focuser is connected and turned on since some drivers do attempt to c
117. hese two catalogs see http ftp nofs navy mil projects pmm catalogs html Both of these catalogs are incredible resources for deep sky observers and CCD imagers The A 2 0 includes stars over the entire sky down to fainter than 19 magnitude truly incredible The SA 2 0 is less useful since when plotted it looks like the stars in the sky are laid down on a grid not useful for creating a star chart but very useful for those doing astrometry measuring accurate positions of objects These catalogs can be downloaded from the Internet using a high speed connection and a great deal of patience You may have better luck obtaining a copy on DVD from another ECU user I suggest you inquire about this on the ECUsers forum see groups yahoo com group ecusers Download information for the USNO A2 0 ftp nofs navy mil projects pmm a response Download information for the USNO SA2 0 ftp nofs navy mil projects pmm sa response The A2 0 is about 6 3 Gigabytes for the entire sky The sky north of 45 degrees declination fits nicely on one recordable DVD Both catalogs are organized into declination zones 7 5 degrees high each zone being comprised of an index file and a data file The zones files are named zoneXXXX acc index and zoneXXXX cat data where XXXX is the number of degrees north of 90 degrees in declination ranging from 0000 to 1725 The 0000 file means data for stars from 90 to 82 5 degre
118. hird order expansions of the modeled plate and telescope effects The fits to the reference catalogs lie in the range 0 5 to 0 9 and most of this is attributable to errors in the reference catalogs to centroiding errors on the relatively large images of the reference stars and to unmodeled astrometric effects Paper II reported estimates of the overall external astrometric error produced by comparisons of independently measured positions in the range 0 2 to 0 8 per coordinate depending on the areas of the plate and the sky Then from a more extensive analysis against the Carlsberg Automatic Meridian Circle data Taff et al 1990 found that GSC absolute positional errors from plate center to edge vary from 0 5 to 1 1 in the north and from 1 0 to 1 6 in the south and that relative errors at half degree separations range from 0 33 to 0 76 depending upon hemisphere and magnitude Production Database Organization and Population Statistics Paper III describes the software system used to produce the GSC It consisted of a set of primarily non interactive image processing and calibration programs interconnected by a set of pipeline files and supported by databases organized on a plate by plate basis A set of utility programs was also provided to support quality control and to correct operational problems Object names are of the form GSC rrrrr nnnnn where the first field specifies an internal region number and the second is an ordinal
119. iagonally opposite corner from the object selected so that it doesn t cover the object selected The dialog box can of course be subsequently moved about the screen wherever the user wishes Other Names HR2061 5A0113271 HD39801 Spectral Type M1 21A IAB DA 1 85 Proper Motion RA 0 026 Dec 0 009 Galactic Longitude 199 79 Galactic Latitude 8 96 If more than one object is in the vicinity the Next button can be pressed to update the dialog box with new information for the next object If another object is selected the current dialog box will be replaced with a new one If the left mouse button is pressed while the cursor is not near an object the dialog box will terminate b Zoom a window the second function performed by the left mouse button is its ability to draw a rectangle on the screen that is used to re position and re scale the sky display The rectangle is drawn by positioning the mouse at one corner dragging the mouse with the left mouse button pressed to another corner and then releasing the button The center of the rectangle defines the new display center and the vertical height is used to scale the display The left mouse button also interacts with the toolbar scroll bars and status line See section 2 1 and 2 4 for details 2 3 2 Right Mouse Button The right mouse button while the cursor is within the sky display is used for the following functions a Center the mouse position if the
120. ical flip and vertical flip see Section 3 4 15 Increase Time Step When the left mouse button is pressed over this button the animation time step in increased by one step When the right mouse button is pressed over this button the dialog box that sets a manual animation time step see section 3 6 15 1 is accessed Decrease Time Step When the left mouse button is pressed over this button the animation time step in decreased by one step When the right mouse button is pressed over this button the dialog box that sets a manual animation time step see section 3 6 15 1 is accessed Reverse One Step When the left mouse button is pressed over this button ECU s time is stepped backward by one animation time step in increased by one step When the right mouse button is pressed over this button the Center on Previous Object function see section 3 6 11 is activated Forward One Step When the left mouse button is pressed over this button ECU s time is stepped forward by one animation time step in increased by one step When the right mouse button is pressed over this button the Center on Next Object function see section 3 6 10 is activated Animation Start Stop When the left mouse button is pressed over this button the operation of the animation mode is toggled on and off There are two special mouse operations that relate to the toolbar If the left mouse button is pressed in an unused region of the t
121. ile dialog box see section 3 9 10 a time date stamp the current date and time in local and UTC formats is optionally added to the file Object Name M42 Other Name NGC 1976 LMT 2004 12 25 09 18pm UTC 2004 12 26 01 18 Today s Notes After adding your notes remember to save the file and close the text editor program If the file was already present it is not overwritten but rather a new time date stamp is appended to the bottom of the existing file allowing the user to add more notes The filename created is usually exactly the same as the object s primary name with TXT added to the end In the example above the file would have been called M101 TXT Because of the restrictions on the naming of files imposed by The Earth Centered Universe Pro V6 0 User s Manual Page 75 66 99 66 99 Windows some names of objects may work directly for example if the name contains letters such as or V that are not allowed in filenames In these cases ECU creates a compatible filename automatically 5 4 Internet Features Several different types of web searches can also be invoked directly from the Identify Object dialog box Note that each object type only makes available the appropriate search types Select the desired type of web search using the drop down list and then press the GO button The object s primary name or the object s position as appropriate is used for the
122. ile for this revision REV_1_1 TBL 1 Two concerns related to the brighter stars arise from the heavily overexposed images on the Schmidt plates used in the GSC namely an incompleteness and a reduced precision Both are addressed in the domain V lt 7 5 by the use of data from The Earth Centered Universe Pro V6 0 User s Manual Page 87 the INCA Data Base Turon et al 1992 Jahreiss et al 1992 Grenon et al 1992 in the Tycho Input Catalog TIC Egret et al 1992 Such entries are designated by the plate identifier 056 in GSC 1 1 The limit of V lt 7 5 preserves the original GSC data for objects that were used in the GSC 1 0 astrometric calibration Naming errors occur when objects catalogued from more than one photographic plate have positional errors sufficiently large that crossmatching of the overlapping plate areas is done incorrectly The most significant known instances of this in GSC 1 0 were associated with overexposed and therefore badly centroided images of the brighter stars A search around the positions of the INCA stars facilitated the identification of these naming errors which were then removed in GSC 1 1 GSC 1 0 contains many pairs of objects from single plates with separations significantly smaller than the expected resolution of the catalog which Garnavich 1991 based on a study of four northern plates estimates at 10 for 8 0 lt V lt 14 0 Visual inspection shows that these are generally blends that h
123. iles PN ECU the SEC planetary nebula file CONS ECU the constellation data file LABELS ECU the text labels data file STRINGS ECU a list of some of the text strings used LOCATION ECU the geographic location data file DSNAMES ECU the deep sky common name data file PTERMS ECU the orbital terms used for high accuracy calculations PINDEX ECU the index file for PTERMS ECU The Earth Centered Universe Pro V6 0 User s Manual Page 9 REGIONS ECU the regions file for accessing the Hubble Guide Stars NEARBY ECU a sample USER object file containing stars near the Sun OBJ sample Object List files LOWELL ORB the Lowell Observatory asteroid element file GSC the directory where the Hubble Guide Star Catalog stars are located USNO the directory where the US Naval Observatory catalog could be placed IMAGES 1 the default directory for image files IMAGES2 a second directory for image files NOTES the default directory for user notes 1 3 Starting ECU ECU is started by selecting the ECU Pro V6 0 icon which either placed on your desktop or is accessible from the Programs menu of the Windows Start menu usually in the bottom left corner of your screen The programs menu section for the ECU icons is Earth Centered Universe Pro 6 The loading of ECU typically takes a few seconds The first time ECU is run you will be prompted to enter registration information including an unlock code
124. ime from GPS menu selection presents a dialog box the Geographic Location or Date and Time to be set using a Global Positioning System GPS receiver The pre requisites for using this feature are Sync Location or Date amp Time from GPS a Your receiver must support and be set to transmit data d Baud Rate Pot according to the NMEA0183 standard ee Ke b Your receiver must be connected to one of your PC s 4800 com z Sync Date amp Time available communications ports and the baud rate and 7 Set PC s time amp date and set ECU to Use System Time COM port setting must be set correctly in the dialog ee e 4 0 Fee box pos west neg east c Your receiver must have achieved satellite lock aA OA Lon B seconds 5 to 180 seconds To sync the geographic location set or confirm the Assumed Time Zone entry in the dialog box and press the Sync Geographic Location button To sync the date and time also set or confirm the Assumed Time Zone item in the dialog box and press the Sync Date amp Time button The accuracy of time setting should be plus or minus 1 2 seconds Note Set GPS Receiver to NMEA0183 data Format Cancel The Earth Centered Universe Pro V6 0 User s Manual Page 29 The Maximum to wait for valid GPS data value can be up to three minutes The default setting of 5 seconds is sufficient for most GPS receivers however some PC based GPS receivers do not begin acqui
125. in the Stars item in the Field menu see section 3 4 4 4 2 5 US Naval Observatory Star Catalogs In addition to the star catalogs included with ECU two additional catalogs not available from Nova Astronomics due to licensing issues produced by the US Naval Observatory are supported These two catalogs are quoted from their website USNO A2 0 contains entries for over a half billion stars 526 230 881 to be exact which were detected in the digitized images of three photographic sky surveys For the entire northern sky and the southern sky down to declinations of 30 all the photographic plates were part of the original Palomar Optical Sky Survey POSS 1 Photographs were taken on blue and red sensitive emulsions Only those stars that were detected in both colors were included in the USNO A2 0 catalog The rest of the southern sky was covered by the Science Research Council SRC J survey and the European Southern Observatory ESO R survey Again only stars appearing in both colors were accepted for the final catalogue USNO SA2 0 is a subset of USNO A2 0 that is a lot easier to handle on a small computer because it contains only a tenth as many stars as the parent catalog 54 787 624 stars in all The goal in creating this smaller catalog was to provide a spatially uniform distribution of stars in an intermediate range of magnitudes that would be useful as a reference grid for astrometric analysis For details about t
126. ins the universal date and time that of the Greenwich meridian The date is always in the format year month date The time is always displayed as hh mm in 24 hour time format d Right Ascension RA and Declination Dec contains either the right ascension and declination of the center of the sky display or the location pointed to by the mouse if the track coordinates feature is enabled see section 3 2 7 The RA is formatted in hours and minutes as hh mm m The Dec is formatted in degrees and minutes as dd mm e Azimuth Azim and Altitude Alt contains either the azimuth and altitude of the center of the sky display or the location pointed to by the mouse if the track coordinates feature is enabled see section 3 2 7 The azimuth is the angle in degrees and minutes from the Northern horizon towards the East The altitude is the angle in degrees and minutes measured vertically from the horizon M The Earth Centered Universe Pro V6 0 User s Manual Page 11 f Field Size Field contains the number of vertical degrees currently shown by the sky display The minimum field size is 0 1 degrees and the maximum is 180 degrees g Animation Time Step Step contains the value of the time step used by the animation mode in minutes hours days months or years In the large status box if an arbitrary time step has been entered the word Manual may be shown instead of the actual value h Magnitude Mag
127. interface must be The baud rate used by the Magellan I is 1200 baud and the Magellan II is 300 baud and their serial interface must be enabled Save these settings permanently by using the File gt Save or File gt Save As menu selections 6 4 2 Enabling the Telescope Interface Prior to enabling the telescope interface a number of steps must be completed as listed below baat ay an S Connect the RS232 cable between the telescope and your computer Turn the telescope on Align the telescope interface following the procedure outlined in its instruction manual Enable the serial interface Enable the telescope interface by selecting the Enable Telescope Interface menu selection see section 3 8 1 or pressing the tool bar button If no error messages were displayed the telescope interface should be functional To disable the telescope interface just select the Enable Telescope Interface menu selection again or press the tool bar button 6 3 3 Using the Telescope Interface Once enabled see section 6 3 2 the telescope interface is quite easy to use Several functions are provided each is described below 1 Position Display if the menu selection Show Position see section 3 8 4 is enabled an indicator will be drawn on the sky display at the position which the telescope is pointed to and will follow it in real time If the menu selection Track Telescope see section 3 8 7 is enabled and the telescope positi
128. isually identified on each plate Comparison of classifications from multiply cataloged objects in the plate overlap areas shows that the purity of objects classified as stars is typically 97 percent Photometric and Astrometric Calibrations The GSC calibrations were obtained on a plate by plate basis by polynomial modeling against the photometric and astrometric reference catalogs Photometry is available in the natural systems defined by the individual plates in the GSC collection generally J or V and the calibrations are done using B V standards from the Guide Star Photometric Catalog Lasker Sturch et al 1988 In Paper II the overall quality of the photometry near the standard stars was estimated from the fits and other tests to be 0 15 mag one sigma averaged over all plates while the quality far from the sequences was estimated from the all sky plate to plate agreement and from comparisons with independent photometric surveys to be about 0 3 mag one sigma with about 10 of the errors being greater than 0 5 mag Additionally Ratnatunga s 1990 comparison of the GSC against totally independent J band photographic photometry for three southern fields 20 sq deg area for 12 5 lt J lt 15 5 shows agreement at the 0 1 0 2 mag level Astrometry at equinox J2000 is available at the epochs of the individual plates used in the GSC and the reductions to the reference catalogs AGK3 SAOC or CPC depending on the declination zone use t
129. ith the graphics card and its associated driver program ECU does not attempt to change the system color palette The Earth Centered Universe Pro V6 0 User s Manual Page 31 3 4 Field Menu The Field menu controls various parameters pertaining to the sky display Each menu selection is described separately in the following sections 3 4 1 Chart Mode Field Flips The Chart Mode Field Flips menu selection provides a sub menu allowing the ECU chart rotation mode to be set and the sky display to be flipped from left to right and or from top to bottom The chart mode the rotation of the sky can be set to one of Star Atlas Local Horizon or PATARENI AE Manual Sky Rotation See section 2 2 for a description of the attributes of each mode The current mode is indicated by a check mark in front of the menu item You can also Manual Sky Rotation C S S 2 Gs 0 to 360 degrees change the chart mode using its toolbar button When Manual Sky Rotation is selected a CCW dialog box is displayed that allows the user to specify an arbitrary angle to rotate the sky chart When the Star Atlas mode is selected the scroll bars are automatically changed to RA Dec mode and when the Local Horizon mode is selected they are automatically changed to the Azim Alt mode Flip Horizontal toggles whether or not the sky display is drawn as a mirror image flipped left to right If marked by a check mark t
130. its see section 3 10 Many of the common menu items have short cut keyboard keys or on screen buttons to allow quick access to their features The keys used are identified by an underline under the key used The Alt key is to be pressed in conjunction with The Earth Centered Universe Pro V6 0 User s Manual Page 19 the identified key Also some menu items identify their keyboard equivalent to the right in their menu item For others see section 2 5 3 1 File Menu The File menu allows the configuration settings of ECU to be loaded opened and saved Virtually every setting in ECU is stored in the configuration file This allows ECU to be set up for a particular astronomical event and this event saved to a unique configuration file for quick retrieval later The file menu also provides access to the setup of and printing of high quality star charts of the current sky display and the ability to configure and generate Object Reports 3 1 1 Open The Open menu selection presents a dialog box allowing a new configuration file selected then subsequently loaded It defaults to file names with the extension cfg Open Configuration File File name Folders ecu cfg c program files ecu6 Cancel ecu cfg Ech A E PROGRAM FILES gt ECUS Gsc EI IMAGES1 C3 IMAGES2 List files of type Drives ECU Configuration Files v c DRIVEC v Network The operation of this dialog box will not be detailed
131. l Page 89 Greisen E W Harten R H An Extension of FITS for Groups of Small Arrays of Data Astron Astrophys Suppl Ser 44 371 374 1981 Grenon M Mermilliod M Mermilliod J C The Hipparcos Input Catalogue HII Photometry Astron Astrophys 258 88 93 1992 Grosbol P Harten R H Greisen E W Wells D C Generalized Extensions and Blocking Factors for FITS Astron Astrophys Suppl Ser 73 359 364 1988 Harten R H Grosbol P Greisen E W Wells D C The FITS Tables Extension Astron Astrophys Suppl Ser 73 365 372 1988 Jahreiss H Requieme Y Argue A N Dommanget J Rousseau M Lederle T Le Poole R S Mazurier J M Morrison L V Nys O Penston M J Perie J P Prevot L Tucholke H J de Vegt C The Hipparcos Input Catalogue II Astrometric Data Astron Astrophys 258 82 87 1992 Jenkner H Lasker B M Sturch C R McLean B J Shara M M Russell J L The Guide Star Catalog III Production Database Organization and Population Statistics Astron J 99 2081 2154 1990 Lasker B M Sturch C R Lopez C Mallama A D McLaughlin S F Russell J L Wisniewski W Z Gillespie B A Jenkner H Siciliano E D Kenny D Baumert J H Goldberg A M Henry G W Kemper E Siegel M J The Guide Star Photometric Catalog I Astrophys J Suppl 68 1 90 1988 Lasker B M Sturch C R McLean B J
132. l velocity is also converted into its distance using the Hubble relationship with a Hubble constant of 75 km s per megaparsec See section 4 2 2 for a detailed description 1 Variable Stars the star s maximum and minimum magnitude the designation of the variable star its type of variability its period its spectral type its rising time or duration of eclipse and the Julian date of a previous maximum The date and time of a future maximum is computed using the period and the epoch of the previous maximum See section 4 3 for a detailed description m Double Stars the combined magnitude of the pair the discoverer code of the pair its Durchmusterung catalog number the magnitudes of both stars the separation and position angle at up to two dates and its spectral type See section 4 4 for a detailed description n Planetary Nebulae the PK and PNG object name any other name usually NGC or IC the object s magnitude its size and its status See section 4 3 3 for a detailed description o User Objects the object s magnitude if known its user number and its text description Precess 5 2 Viewing Images Viewing images of objects is provided by ECU running an image viewer program with the name of the image file to view This is accomplished by pressing the Image button If an image for the identified object or the image viewer program is not present the Image button will be disabled The
133. lay is centered at the northern horizon When the right mouse button is pressed over this button the sky display is re centered 10 degrees to the north South When the left mouse button is pressed over this button the sky display is centered at the southern horizon When the right mouse button is pressed over this button the sky display is re centered 10 degrees to the south East When the left mouse button is pressed over this button the sky display is centered at the eastern horizon When the right mouse button is pressed over this button the sky display is re centered 10 hour to the east West When the left mouse button is pressed over this button the sky display is centered at the western horizon When the right mouse button is pressed over this button the sky display is re centered hour to the west Stars When the left mouse button is pressed over this button the display of stars is toggled on or off When the right mouse button is pressed over this button the dialog box controlling sky database settings see section 3 4 4 is accessed Deep Sky When the left mouse button is pressed over this button the display of deep sky objects is toggled on or off When the right mouse button is pressed over this button the dialog box controlling deep sky parameters see section 3 4 4 is accessed Variable Stars When the left mouse button is pressed over this button the display of variable stars is toggle
134. ld of view indicators that can be drawn on the sky display Angular size values for each field of view indicator can be entered from 0 05 to 90 degrees Each field of view can be individually enabled by checking its corresponding Enable check box The rectangular fields of view indicators can also be arbitrarily rotated over a range of 0 to 180 degrees The Set to Telrad and Set to QuikFinder buttons automatically set the fields of view to match the popular Telrad and Rigel QuikFinder zero power telescope finder devices The Earth Centered Universe Pro V6 0 User s Manual Page 39 Default Field Target Circular 1 Rectangular 1 Diameter deg 4 000 Width deg 1 500 Height deg 1 000 Circular 2 Rotation deg 0 00 Diameter deg 2 000 I Enable Iw Enable Rectangular 2 Circular 3 Width deg 15 000 Diameter deg 0 500 Iw Enable Height deg 10 000 Rotation deg 0 00 Ems e Set to Quikfinder Cancel It is easy to determine what angular values to enter for your telescope and eyepiece combination without knowing the focal length of your telescope or the parameters of your eyepiece Simply position a star located within a few degrees of the celestial equator just off the east side of your eyepiece field and time in seconds how long it takes to cross the field Make sure your clock drive is turned off The field size in degrees is 0 004166 time s Pressing the righ
135. led ecu60gsc exe and contains the stars of the Hubble Guide Star Catalog To install follow these steps below 1 Locate the file ecu60pro exe and run it This will start the main installer Follow the instructions presented on screen and go through all the install steps until the installer exits You will be presented the option to install various astronomical databases If you don t know what these are see section 4 of this manual 2 optional Locate the file ecu60gsc exe and run it This will start the Guide Star Catalog installer Follow the instructions presented on screen and go through all the install steps until the installer exits 3 Proceed to section 1 3 Starting ECU When fully installed ECU comprises the following files ECU6 EXE the main executable program file ECU CFG the default configuration file ECU INI contains information about the installation BOUNDS ECU constellation boundaries data file YBSC ECU the three Yale Bright Star catalog files SAO ECU the two Smithsonian Astrophysical Observatory star files TYC ECU the five Tycho 2 star catalog files MESSTER ECU the Messier object file SAC ECU the two Saguaro Astronomy Club deep sky object files PGC02 ECU the five Principle Galaxy Catalog files GCVS ECU the two General Catalog of Variable Stars files VARTYPE TXT a text file listing the codes used for types of variable stars WVDS ECU the two Washington Visual Double Star Catalog f
136. lescope and can be correctly sized to match the current field size 3 8 6 Show Coordinates The Show Coordinates menu selection is a toggle which determines if the current position of the telescope in Right Ascension and Declination is displayed on the screen The position is displayed in a small window that is always positioned at the lower left corner of the sky display It can however be moved by the user Scope Coordinates RA 00 08 10 Dec 03 26 24 The Earth Centered Universe Pro V6 0 User s Manual Page 55 3 8 7 Track Telescope The Track Telescope menu selection is a toggle that determines if the sky display is to track the current position of the telescope If active and the telescope position cross hair see section 3 8 4 moves out of the sky display it will be re drawn with the current telescope position at the center The behavior of the Track Telescope feature is augmented by the Auto Track Telescope feature see next section 3 8 8 Auto Track Telescope The Auto Track Telescope menu selection when activated changes the behavior of the Track Telescope feature see previous section The purpose of this feature is to avoid the situation that occurs when the Track Telescope feature is enabled and the user centers on an object using one of the Center menu functions that causes the sky display to be redrawn away from where the telescope is currently pointed the Track Telescope feature would then imme
137. lors 2 2 acccdedeentedadehieedelyainebedebcesdedebebedadpiaesdshubededexs 31 3 4 Field MCN E 32 3 4 1 Chart Mode Field Els 32 EE 32 3 4 3 Magnitude LUIS A a kaa eae 32 OSE TIPS ee 33 EE 35 3 4 6 Deep Sky EE 35 OA LU SCRODICCIS E 35 3 4 8 Planets oaei eRe TCE eT eT ECE ERE eT Re RT 36 g4 OU EE 36 3 4 10 EE 36 MM MOON EE 36 3 4 12 Cometsiheterode AAA 37 3 4 13 IVES ONE Sites ves ed eas ees ence ts cares sed ence td cas eed ewan casas aa 37 3 4 14 Custom e ed EE 37 E KN EE 37 3 4 16 Auto Ee EE 38 E Ke H ee 39 3 4 17 1 Set Screen Fonts eege deed ae 39 39 4 17 2 USE ele 39 3 4 17 3 Increase Font Size by 209 39 3 4 17 4 Decrease Font Size by 2096 39 3 4 18 TEE eech ere ee ee edd 39 3 4 18 1 Default Field Tage 39 3 4 18 2 Show Default Field Target 40 3 4 18 3 Place Field Target ccccccccccccccccceeeeeeeeeeeeeeees 40 3 4 18 4 Clear Last Field Tage 40 3 4 18 5 Clear All Field Targers 40 DAA OIC RE 40 DAs ee EE 41 SHROT EANTA EEE E E E E EE EE EO EE E EE E S 41 3 5 1 Define Orbits A 41 3 5 2 Fiter OD S ee 42 3 5 3 Enable All Orbits 2 0 2 0 ccceesecneeceesseeceesesseeeeeesessenseeeeeeseneeees 43 REEL TC 43 EE 43 3 5 6 Delete Disabled Orbits 0c ccccecceeccecceeececceeceeccecceeeeeecesens 43 3 5 Load OTDI an ainAs alla Naha R tenia i 43 3 5 8 DAVE EE 44 en Re EE 44 3 5 10 Download Reie 45 3 5 11 Append New COrtuts AEN 46 3 6 Center Met eise enee AAAA AA AAAA ARANA AN AAA NAAL scuducussdutveusaat 46 3
138. m of the page containing the chart title geographic location the universal and local date and time the center of the chart as the right ascension and declination the center of the chart as the azimuth and altitude and the height of the field in degrees If the printer is set in portrait mode or if the height of the paper is larger than its width a legend box can be drawn above the title box If the printer is set in landscape mode or if the width of the paper is larger than its height a legend box can be drawn on the right side of the page The legend box shows the stellar magnitude limit and the star symbols used the deep sky magnitude limit and the deep sky symbols used and an area for your notes A Split Chart feature can also print two charts per page each one at a different field size If the Save Object Report feature is enabled you will be prompted to specify a file name after the chart has printed 3 1 7 Printer Setup The Earth Centered Universe Pro V6 0 User s Manual Page 21 The Printer Setup menu selection presents a dialog box allowing the user to select and setup a printer to be used by ECU The dialog box contains a drop down pick list and three buttons The printer to be used is selected from the pick list To change the default settings for the selected printer press the Setup button This will activate the printer s setup dialog box where such items as the printer s resolution an
139. mall little elongated gradually very little brighter in the middle 708 vF vS R very faint very small round 891 B vL vmE bright very large very much elongated 7009 vB S remarkable object very bright small 2099 B vRi mC remarkable object bright very rich much compressed 6643 pB pL E50 2 st p pretty bright pretty large elongated in position angle 50 degrees two stars preceding h Notes notes pertaining to the object Much of this field came from UGC Notes provided by Jim Lucyk Most of the abbreviations used by the Description field apply here also Several other common names are included in this field If there is a position angle PA here that is providing a companion objects angle in relation to the main object Another abbreviation that is used often is P w N paired with NGC or P w U paired with UGC Most of the data on companions to an object have been marked to make recognition easier but some did not fit into the 71 spaces allotted So the data is always in this order distance in minutes from main object PA from main object then the size and magnitude of the companion Example P w N4566 4 5 120 0 9X0 7 says that the main object is paired with NGC 4566 and is at 4 5 position angle 120 degrees and 0 9 X0 7 i Size the size of the object in minutes of arc seconds of arc and degrees For objects that are elongated often the dimensions of the long and short axis are li
140. must be entered in 24 hour format 0 to 23 hours Date Hour j UTC Daylight savings time Use system time The Daylight savings time check box is used to determine if the time is to be interpreted as local standard time usually winter time or daylight savings time usually summer time Either Local Standard Time or Daylight Savings Time is displayed at the top of the dialog box to re enforced the current mode The UTC check box is used to quickly change to entering the Universal Time rather than the local time The Use System Time check box is used to set the time to the current time as provided by your PC s clock This is equivalent to the Use System Time menu selection see section 3 3 1 3 Five buttons are also provided which make it easy to set the time to a when the Sun rises today b when the Sun sets today c when the Moon rises today d when the Moon sets today and e the current date and time If an error is detected when ending the dialog box pressing OK a beep will sound and the cursor will be placed at the offending field This menu selection can also be activated by pressing the left mouse button while the mouse is in box which displays the local mean date and time LMT in the ECU status line or when the left mouse button is clicked on its button on the toolbar The keyboard equivalent to this menu selection is Alt T The Earth Centered Univer
141. n 51 sec Epoch 9 re 32000 0 C B1950 0 The Right Ascension is entered as integer hours integer minutes and seconds The Declination is entered as integer degrees integer minutes and seconds In order to be more flexible decimal minutes are also accepted in this case set the seconds field to 0 When the dialog box ends ECU centers the sky display at the coordinates entered using the selected epoch 3 6 3 On Az Alt The On Az Alt menu selection presents a dialog box allowing the user enter a specific Azimuth and Altitude with reference to the local horizon to center the sky display on Both the Azimuth and Altitude are entered as degrees and minutes Center on Az Alt Azimuth degrees 59 6 minutes Altitude 37 degrees 37 9 minutes When the dialog box ends ECU centers the sky display at the local horizon coordinates entered This menu selection can also be activated by pressing the left mouse button while the mouse is in either of the boxes that display the current Azimuth Altitude in the ECU status line 3 6 4 On Constellation The On Constellation menu selection presents a dialog box allowing the user to select a constellation to center the sky display on A list box is presented containing the available list of 88 constellations in alphabetical order The user is to select the desired constellation then exit the dialog box ECU then centers the sky display on the selected constellation Center on Const
142. n brightness A detailed file vartype txt can be found in the ECU directory that lists and describes all the codes f Spectral Type the spectral type of the star if known g Period the period of variability of the star if known h Rising Time or duration of eclipse the rising time or during of eclipse expressed as a percentage of the period i Epoch the Julian Date of a previous maximum ECU uses this date and the period to predict the date and time UTC of the next maximum The computation is based solely on the data which may result in inaccurate results Your best source for update date information on variable stars is the American Association of Variable Stars see Www aavso org 4 4 Washington Visual Double Star Catalog ECU includes the 2010 November 23 edition of the Washington Visual Double Star WVDS Catalog which is a catalog containing 108 626 pairs of double stars It was compiled by a group of professional astronomers led by C E Worley at the United States Naval Observatory Selected fields from the original WVDS database were extracted for use in ECU These fields are described below a Discoverer Code and Number the name of the double star which is comprised of two parts the discoverer code usually the initials of the discoverer followed by a sequential number b DM Name the stars Durchmusterung catalog number if known c Position the object s position Right Ascension and
143. nger pertinent Plans for GSC maintenance beyond version 1 1 include an astrometric recalibration cf Taff Lattanzi and Bucciarelli 1990 and investigation of erroneous double entries that may exist for V gt 7 5 4 ORGANIZATION OF THE DATA FILES The Guide Star Catalog is subdivided into regions that are bounded by small circles of right ascension and great circles of declination and that are numbered consecutively from 0001 to 9537 Data for each region are stored as separate files these files are contained in directories each of which subtends a 7 5 degree zone of declination The Guide Star Catalog is distributed as a two CD ROM set divided at a declination of 7 5 degrees An introductory file README TXT 1 and the supporting tables are duplicated on both discs All data files i e with the exception of the file README TXT 1 and the directory files are in FITS Flexible Image Transport System Greisen et al 1981 Wells et al 1981 Grosbol et al 1988 and Jahreiss et al 1992 table format The root directory contains the following files README TXT 1 Introduction GSC Directory for GSC region files TABLES Directory for GSC supporting tables Directory GSC contains directories for the 7 5 degree zones in declination these directories in turn contain the GSC region files in FITS format for the respective zone with file identifiers of the form nnnn GSC 1 where nnnn is the 4
144. nges from 8 per second in Slew mode to 15 arc seconds per second in Guide Note that the Meade Autostar does not support changing motor speed settings via its serial interface you must do this using the hand controller The other two buttons labeled Focus S and Focus F mean focus slow and focus fast When either of these two buttons is selected the N and S buttons are replaced with O and T buttons O and T represent focus out and focus in respectively To move the telescope simply press the button to select the desired speed and then press the desired direction button for example N If Pulse was checked the telescope will move briefly north otherwise the N button will change to a lt N gt indicating that it is active Pressing N again will stop the telescope motion To focus the telescope simply press the button to select the desired focus speed and then press the desired direction button for example O If Pulse was checked the focus will move briefly out otherwise the O button will change to a lt O gt indicating that it is active Pressing lt O gt again will stop the focus motor 3 8 10 Confirm Syncs The Earth Centered Universe Pro V6 0 User s Manual Page 56 The Confirm Syncs menu selection is a toggle that determines if the user is prompted to confirm telescope sync operatio
145. ns This makes it less likely that you will accidently sync your telescope on the wrong object or location 3 8 11 Set Telescope Time The Set Telescope Time menu selection sets the time used by many telescopes including Meade LX200s LXD mounts Autostar based telescopes Losmandy Gemini and the Astro Physics GTO mount to the current time as provided by your PC s clock If you use this function make sure that the PC s time has been set very accurately otherwise telescope positioning accuracy may be degraded Note that with the Astro Physics GTO mount ECU sets the time automatically as part if its initialization 3 8 12 Set Telescope Geographic Location The Set Telescope Geographic Location menu selection sets the geographic location used by many telescopes including Meade LX200s Meade LXD mounts Autostar based telescopes Losmandy Gemini and the Astro Physics GTO mount to that currently set in ECU Note that with the Astro Physics GTO mount ECU sets the location automatically as part if its initialization Note that if this function generates an error with the Meade Autostar telescope this is a sign that the firmware in your Autostar should be upgraded see the Meade website for details on how to do this 3 8 13 Set Encoder Interface Resolution The Set Encoder Interface Resolution menu selection is used to program the number of counts per revolution for each optical encoder into the encoder interface This procedure only nee
146. ns to be distorted spread out most noticeable in constellations like Ursa Major the big dipper This is the same distortion that makes Canada appear much larger than the United States on world maps with similar projections Canada is only about 10 larger In the Star Atlas mode when displaying the sky either North of 45 or South of 45 degrees in Declination and a field size of 60 degrees or less the Zenithal Equidistant Projection is used This projection is quite good but does spread out objects a bit at low Declinations When displaying the sky with field sizes larger than 60 degrees in the Star Atlas mode or at all times in the Local Horizon mode an Orthogonal Projection is used This projection is essentially a sphere like the Earth viewed from infinity It can show an entire hemisphere of the sky at once but suffers from distortion at the edges of the field The objects and items displayed in the sky display are listed below Each will be discussed in detail in sections 3 and 2 4 by the specific menu selection or screen resource that controls their operation The Earth Centered Universe Pro V6 0 User s Manual Page 12 a Grid the equatorial aligned to right ascension and declination or local horizon aligned to azimuth and altitude coordinate grids help illustrate the sky projections just described The grid is automatically scaled so that a sufficient number of lines always cross the screen b Stars stars are
147. ny one time The Color radio button is the mode where the color of each sky display drawing element can be z 192 Ls individually set as described below The White on Black B ei i A Color o aL ackground mode causes the entire sky display to be drawn in C White on Black Background ee white with a black background The Black on White Black on White Background att Background mode causes the entire sky display to be drawn in Night Vision Mode color sky ge black with a white background This mode is especially useful C Night Vision Mode red sky for pasting the display into other Windows program for further r IReditaoberiecdl Seatteline EN manipulation Either of these two modes may also be useful when ECU is used on laptop computers with black and white ae E LCD screens H e The Night Vision modes color sky and red sky are intended to be used in the field or in an observatory and will help maintain the user s dark adaptation The color sky mode causes the whole screen except for the sky display to appear in black and shades of red The red sky mode causes the whole screen including the sky display to appear in black and shades of red In both of these modes the system colors are changed and thus the colors of all other Windows applications running on your system will be affected When exiting ECU all of the system colors are restored to their original state The checkbox Re
148. o duplicate stars The following information is included for each star a Position J2000 0 epoch 10 arc second resolution in declination 20 arc second resolution in right ascension b Magnitude nearest tenth c SAO Number d Spectral Type 4 2 3 Tycho 2 Star Catalog The Tycho 2 Star Catalog is a production of the European Space Agency and is based on data acquired by the Hipparcos astrometric satellite For detailed information about the catalog see www astro ku dk erik Tycho 2 The base catalog contains about 2 5 million stars and contains stars as faint as magnitude 12 13 Since the base Tycho 2 Star Catalog is missing some stars including many bright ones the database used by ECU was supplemented with data from the Hipparcos Catalog and two supplement catalogs A total of 2 436 615 stars are in the database that is contained in the files TYC1 ECU to TYC5 ECU For efficiency reasons the database was split into bright magnitude 6 2 and brighter and faint fainter than magnitude 6 2 stars The following information is included for each star a Position J2000 0 epoch b Magnitude nearest tenth c Tycho Catalog Number d Hipparcos Catalog Number if available e Henry Draper Catalog Number if available f Corrected V Magnitude nearest hundredth if available g Corrected B Magnitude nearest hundredth if available h Parallax if available distance is computed from the parallax by ECU i Parallax Error
149. of the addresses e mail preferred listed on the cover page of this manual 1 1 System Requirements The Earth Centered Universe Pro V6 0 User s Manual Page amp ECU s minimum system requirements are listed below Hardware Any Intel or AMD based PC Compatible Computer Pentium or faster recommended Operating System Runs within the Microsoft Windows 2000 XP Vista and 7 operating systems 32 or 64 bit Memory Minimum 30 megabytes free from within Windows some program features may require more memory especially if you have an abnormally high resolution display or if you are using the optional databases variable star double star Hubble Guide Star Catalog or US Naval Observatory star catalog Hard Disk Space Up to about 230 Megabytes not including the Hubble Guide Star Catalog depending on the installation options selected Graphics Card A VGA or better graphics card 640x480 pixels XGA recommended 1024x768 pixels with at least 64k colors Mouse Windows compatible pointing device Printer optional Windows compatible printer 1 2 Installation Instructions Installation of ECU is performed by using two installer programs These are either on a CD or DVD provided to you OR downloaded from the internet at locations provided to you The first installer program file is usually called ecu60pro exe It installs all of the program options except the Hubble Guide Star Catalog The second one is usually cal
150. oggled on or off When the right mouse button is pressed over this button the dialog box controlling label settings see section 3 4 12 is accessed Geographic Location When the left mouse button is pressed over this button the dialog box that sets the geographic location on the Earth see section 3 3 2 is accessed When the right mouse button is pressed over this button Sync Location or Time from GPS dialog box see section 3 3 3 is accessed Time When the left mouse button is pressed over this button the dialog box that sets the local time see section 3 1 1 1 is accessed When the right mouse button is pressed over this button the dialog box that sets the Universal time see section 3 1 1 2 is accessed The Earth Centered Universe Pro V6 0 User s Manual Page 16 Field Size When the left mouse button is pressed over this button the dialog box that sets the vertical field size see section 3 4 16 is accessed Magnitude Limits When the left mouse button is pressed over this button the dialog box that sets the magnitude limits see section 3 4 3 is accessed When the right mouse button is pressed over this button the dialog box controlling sky database settings see section 3 4 4 is accessed Database Search When the left mouse button is pressed over this button the dialog box which sets searches for an object in the ECU databases see section 3 6 1 is accessed When the right mouse button is pre
151. oking at the computer screen while moving the telescope except for the final positioning To silence the beeping sound press the button or the B key on the keyboard Center Scope RA 00h37 88m Dec 23051 3 The best method to find objects is to move each axis of the telescope separately Move the first axis until the beeping sound is heard Silence the sound Move the second axis until the beeping sound is heard again Silence the sound Zero in on the object by fine adjusting the telescope position until the coordinates display reads zero End The Earth Centered Universe Pro V6 0 User s Manual Page 84 the process by pressing the OK button You can also use the menu selection Move Telescope to Chart Center see section 3 7 2 Note that unlike some other telescope interfaces the Magellan and Sky Commander Losmandy DSC do not support syncing via the serial interface on an object to improve pointing accuracy but may support syncing using their built in keypad The Earth Centered Universe Pro V6 0 User s Manual Page 85 Appendix Guide Star Catalog Info Nova Astronomics has obtained a license from the Space Telescope Science Institute to reproduce data from the Guide Star Catalog As a requirement of the agreement Nova Astronomics is required to provide this reproduction of the original printed booklet included with the original CD ROM set Several changes
152. omma delimiter which depends on the setting you used to create the file the default is Tab g Press the Finish Button h After the file has loaded you will have to adjust the column widths Report Settings General Settings General Settings Exclusions Select either Comma separated output or Tab separated output to specify Ge i Comma separated output Iw Stars the character that is used to delimit fields in the file Tab format is e Tab separated output variable Stars recommended JV Include title section F Double Stars Iw Include legend lines Deep Sky The Include title section check box specifies if the title section is to be Edit file afterwards Solar System included in the report This section includes information such as the geographic location date and time sky position and field size pertaining to Cancel the data included in the report The Earth Centered Universe Pro V6 0 User s Manual Page 24 The Include legend lines check box specifies if the legend lines are to be included in the report The legend lines include a lines identify each field included for each object type The Edit file afterwards check box determines if the Object Report file generated will be automatically loaded into your specified text editor usually Notepad Exclusions The exclusions section allows you to exclude groups of objects from being included in the report file Note that
153. ommunicate with the telescope or focuser during the configuration process After configuring the driver press the OK button Note that in order for ECU to use the selected focuser the use of ASCOM focuser s has to be enabled see the next section a ASCOM Focuser Chooser Select the type of focuser you have then be sure to click the Properties button to configure the driver for your focuser Simulator e Properties Click the logo to learn more about ASCOM a set of standards for inter operation of astronomy software 3 8 19 Use ASCOM Focuser If this menu item is checked the selected ASCOM focuser driver see section 3 8 18 is used otherwise ECU does not use the focuser driver This feature allows the focuser to be controlled by other programs such as MaxIm DL a CCD camera control program 3 8 20 Telescope Goto Limits The Telescope Goto Limits menu selection presents a dialog box used to set the parameters that can limit the motions of a GOTO Type telescope If either of the Use declination limits or the Use altitude limits check boxes is checked the telescope motions only as initiated by a goto command from ECU will be restricted to the minimum and maximum declinations and or altitudes entered into the dialog box In order for the altitude limits to work correctly be sure you the time and geographic location set correctly When a telescope is requested to move to a location outsid
154. on an all sky single epoch single passband collection of Schmidt plates For centers at 6 degrees and north a 1982 epoch Quick V survey was obtained by the Palomar Observatory while for southern fields materials from the UK SERC J survey epoch approximately 1975 and its equatorial extension epoch approximately 1982 were used In addition over 100 short exposure plates were taken with the Palomar Oschin and UK Schmidt telescopes to cover complex regions including the southern Milky Way the Magellanic Clouds and M31 These northern southern and supplemental plates hereafter are referred to as N S and X plates respectively The plates were digitized into 14000 square rasters at 25 um sample intervals using modified PDS microdensitometers The sky background was modeled with a bi dimensional cubic spline approximation to the modal level Then an object finder based on locating connected pixels at a certain threshold above the background was used to obtain for each plate a The Earth Centered Universe Pro V6 0 User s Manual Page 86 list of positions sizes intensities and related descriptive parameters Images with multiple peaks were deblended by an algorithm based on correlations against a library of stellar images The identified objects were classified as stars or non stars by an interactive multivariate Bayesian classifier that used image features from the object detection steps and was started from a small set of objects v
155. on moves out of the sky display it will be re drawn with the current telescope position at the center of the sky display You should also read about the Auto Track Telescope feature in section 3 8 8 The type of indicator displayed depends on the state of the menu selection Use Default Field Targets see section 3 8 5 If checked the position display will be the programmable field circles or rectangle as described in section 3 4 18 1 If not checked a fixed size cross hair is used Coordinate Display if the menu selection Show Coordinates see section 3 8 6 is enabled a window will be visible which displays the real time equatorial coordinates of the telescope Find an Object to locate an object in the sky select the object in the sky display with the left mouse button and press the Center Scope button This will cause a dialog box shown below to appear on the screen Depending on the Large Center Scope Box setting in the Telescope Type and General Settings dialog box see section 3 8 15 a large version of this window may also appear making it easier to see the read the coordinates when you are a large distance from the screen Move the telescope until both the coordinates displayed read zero or nearly so To make this process easier when the telescope is closer than 2 degrees from the object in either axis a beeping sound will be heard if enabled see section 3 8 16 This feature eliminates the necessity of lo
156. oolbar the state of the status box is cycled through being disabled small in size and large in size If the right mouse button is pressed in an unused region of toolbar the status line is toggled on and off c Status Line Speed buttons When the left mouse button is pressed while over the boxes on the status line used to display various status items see section 2 1 the appropriate dialog box which relates to the items is accessed For The Earth Centered Universe Pro V6 0 User s Manual Page 17 example if the left mouse button is pressed within the box that displays the magnitude limits the Magnitude Limits dialog box will pop up In addition pressing the right mouse button over the geographic location display causes the Sync Location or Time from GPS dialog box see section 3 3 3 to be accessed the local or UTC time display causes the Julian Date Sidereal Time dialog box see section 3 8 2 to be accessed the animation step size display causes the animation step size to toggle back and forth between the last two step sizes There are two special mouse operations that relate to the status line If the left mouse button is pressed in an unused region of the status line the dialog box that controls the status line is accessed If the right mouse button is pressed in an unused region of the status line the toolbar is toggled on and off Note that as the mouse hovers over t
157. ound or as new models of telescopes are introduced In order to use an ASCOM telescope or focuser within ECU the ASCOM Platform must be installed The latest version is always available at www ascom standards org Downloads ScopeDrivers htm After installing platform you have to download and install the drivers for your specific telescope Be sure to re boot your computer before attempting to use them 6 3 1 Initial Set Up The first time you use an ASCOM controller telescope or focuser you will have to make some adjustments to ECU s settings However as mentioned in the previous section the ASCOM Platform the drivers must have previously installed Select Telescope Type and General Settings from the Telescope menu see section 3 8 15 for details Select the Telescope Interface Type to the ASCOM Telescope the currently selected drivers are also displayed When selecting the telescope interface type the update delay is automatically set to a suitable value Under normal circumstances you should not have to change the update delay however if your PC or telescope operates slowly when the telescope interface is enabled try using a higher update delay Select ASCOM Telescope Setup see section 3 8 17 Use the drop down list to select a telescope driver then press the Properties button to appropriately configure the driver every driver is different so you are on your own to figure it ou
158. ove if the object is below the local horizon or a limit imposed by the telescope and an error message will be displayed otherwise the telescope will slew to the object You can also limit the motions of telescope using user defined Telescope Goto Limits see section 3 8 20 You can also slew to the position occupied by the center of the sky display by using the menu selection Move Telescope to Chart Center see section 3 8 2 5 Synchronize Telescope the user can instruct the telescope to re synchronize its current coordinates to known coordinates This improves the pointing accuracy of the telescope The usual procedure is to first use the slew function see item 4 above to find an object Due to various errors the object will not likely be in the exact center of the field of view of the telescope Use the telescope s manual controls to position the object in the center of the field of view Then finally select the same object again with the left mouse button and press the Sync Scope button from the Identify Object dialog box You can also synchronize the telescope to the position occupied by the center of the sky display by using the menu selection Sync Telescope to Chart Center see section 3 8 3 Depending on the Confirm Syncs setting see section 3 8 10 the user may be prompted to confirm a sync operation Note that not all telescopes such as the Celestron NexStars support the syncing feature 6 4 Using an RA Dec
159. pears in a web brower window You must be connected to the Internet for this feature to work The images originate from the Space Telescope Science Institute s Digitized Sky Survey service For information see www gsss stsci edu DSS dss_home htm The web address used to retrieve the image is set in the Directory File Web Setup dialog see section 3 9 10 By default the red DSS2 image is retrieved since it seems to have more complete sky coverage but the technical user could change the web address to retrieve other images 3 9 4 DSS Image Size The DSS Image Size menu selection presents a dialog box allowing the user to specify the size in arc minutes of Digitized Sky Survey images retrieved from the Internet DSS Image Size Image size to retrieve em 5 to 30 arc minutes 3 9 5 Retrieve Nearest Clear Sky Clock The Retrieve Nearest Clear Sky Clock menu selection uses the current Geographic Location to access the nearest within 50km by default Clear Sky Clocks the data appears in a web brower window You must be connected to the Internet for this feature to work The Clear Sky Clock CSC is a free service provided by Attilla Danko of Ottawa Canada and the Canadian Atmospheric Environment Service The CSC provides site specific predictions of cloud cover transparency seeing quality darkness wind speed humidity and air temperature for North America For information see cleardarksky com csk www weathero
160. precession circle primarily caused by the gravitational pull of the Moon Nutation can only be calculated when the High Accuracy Calculations selection is enabled 3 3 4 4 Aberration This menu selection controls whether the Solar System object positions except for comets and asteroids are to be corrected for the effects of Aberration Aberration is the apparent displacement of the position of an object due to the finite speed of light This effect is due to the rotation of the Earth and the motion of the Earth through the solar system The effect of Aberration can only be calculated when the High Accuracy Calculations selection is enabled 3 3 4 5 Light Travel Time This menu selection controls whether the Solar System object positions except the Moon are to be corrected for the effects of the Light Travel Time The Light Travel Time correction recognizes that the observer sees an object at where it used to be in the past Light Travel Time corrections can only be calculated when the High Accuracy Calculations selection is enabled 3 3 4 6 Observer s Parallax This menu selection controls whether the Solar System object positions except for comets and asteroids are to be corrected for the effects of the Observer s Parallax The Observer s Parallax is the effect of an apparent shift of an objects position for observers located at different locations on the Earth This effect is what causes the Solar Eclipses and Occultations of the Moon to
161. r Ir Irregular 4 2 2 Principle Galaxy Catalog ECU includes the 2002 Edition of the Catalog of Principal Galaxies PGC which is a catalog containing 980 947 galaxies It was compiled by a group of professional astronomers led by G Paturel of France Selected fields from the original PGC database were extracted for use in ECU These fields are described below a Galaxy Names the PGC number is the primary name of each galaxy Up to four other identifications are included These are from the NGC UGC MCG Messier and IRAS catalogs and others b Position the object s position Right Ascension and Declination in the J2000 0 epoch c Magnitude the object s brightness to the nearest tenth There are many galaxies with no published magnitude they are listed as d Size the size of the object in minutes and tenths of minutes of arc For galaxies that are elongated often the dimensions of the long and short axis are listed e Class the class or morphological type of the galaxy coded according to the Hubble Classification Scheme see below with additions for unusual galaxies For more information see http en wikipedia org wiki Hubble_sequence The Earth Centered Universe Pro V6 0 User s Manual Page 71 Hubble Classification Scheme Spirals Ellipticals BarredSpirals f Position Angle PA the position angle if known is given in degrees with north as zero degrees progressing clo
162. r however the source database only reports positions to 1 in Declination and 0 1 in Right Ascension These fields are described below a Object Name usually the NGC number but for objects with no NGC value other catalogs are used The abbreviations listed below are used to represent the other catalogs Abell George Abell planetary nebulae and galaxy clusters ADS Aitken Double Star catalog AM Arp Madore globular clusters Antalova open clusters Ap Apriamasvili planetary nebulae Arp Halton Arp interacting galaxies Bark Barkhatova open clusters B Barnard dark nebulae Basel open clusters BD Bonner Durchmusterung stars Berk Berkeley open clusters Be Bernes dark nebulae Biur Biurakan open clusters Blanco open clusters Bochum open clusters Ced Cederblad bright nebulae Cr Collinder open clusters Czernik open clusters DDO David Dunlap Observatory dwarf galaxies Do Dolidze open clusters DoDz Dolidze Dzimselejsvili open clusters Dun Dunlop globular clusters Fein Feinstein open clusters Frolov open clusters Gum bright nebulae H William Herschel globular clusters Haffner open clusters Harvard open clusters He Henize planetary nebulae Hogg open clusters HP Haute Provence globular clusters Hu Humason planetary nebulae IC Ist and 2nd Index Catalogs to the NGC All except dark nebulae Isk Iskudarian open clusters J Jonckheere planetary nebulae
163. r Brook NF Canada David Dunlap Obs Canada Digby NS Canada Edmonton 4B Canada Elginfield Obs ON Canada Fingal ON Place Name Canada Halifax NS Longitude 63 degrees 36 0 minutes Latitude 44 degrees 36 0 minutes Time Zone 4 0 hours Canada Fredericton NB Canada Fundy Nat Park NB Canada Georgetown ON Canada Goose Bay NF Canada Halifax NS The database file used to store the geographic locations is user programmable The default file used is LOCATION ECU See section 3 9 10 for details on how to change this file The format used for this file is a plain text file and is formatted as shown by the following sample entries below Pos west Neg east Save Cancel Add Delete 44 58 47 83 43 65 42 83 51 50 63 65 4 Canada Halifax NS 71 25 5 Canada Quebec QUE 79 38 5 Canada Toronto ONT 5 Canada Windsor ONT 0 17 0 UK London The first three entries which are separated by spaces are the latitude decimal degrees North of the Equator longitude decimal degrees West of the Prime meridian and time zone hours West of UTC The fourth entry is the name of the location This menu selection can also be activated by pressing the left mouse button while the mouse is within the box that displays the geographic location in the status line or by pressing its button on ECU s toolbar The keyboard equivalent to this menu selection is Alt G 3 3 3 Sync Location or Time from GPS The Sync Location or T
164. r changes to a hand to indicate that this mode is active This mode works with the Faster Drags item in the Edit menu see section 3 2 8 However regardless of this setting text labels are not Auto Placed while dragging 2 3 4 Control Key The Earth Centered Universe Pro V6 0 User s Manual Page 14 When the control Ctrl key is held down while the mouse cursor is within the sky display the coordinate displays in the status box and or status line update as the mouse cursor is moved This mode works with the Track Coordinates item in the Edit menu see section 3 2 7 2 4 On Screen Controls The on screen controls include the scroll bars toolbar and speed buttons Each is described below a b Scroll Bars Two scroll bars are used to rapidly move the center of the sky display about the celestial sphere The scroll bars can be enabled or disabled using the menu selection described in section 3 2 5 They are used in two modes as controlled by the menu selection described in section 3 2 6 1 RA Dec The vertical bar is used to change the Declination 90 degrees is at the top 90 degrees is at the bottom Pressing the end arrows will move the pointer and the sky display by one degree and pressing along the bar will move the pointer by 10 degrees The horizontal bar is used to change the Right Ascension 23 hours 59 minutes is at the left 0 hours is at the right Pressing the end arrows
165. r program this item controls which program is used to display or edit text files The observing notes button in the Identify Object dialog box uses this If it is left blank the current default Windows text editor is used usually Notepad f The user object files this item specifies the name of up to five text files used to store objects added to ECU by the user See section 3 4 7 for the details about the format used for this file Each filename is entered separated by a semi colon character a nd should include the filename and drive directory For example c Program Files ecu6 user1 ecu c Program Files ecu6 user2 ecu g The images directories this item provides for the entry of two directories where ECU will search for image files h The Lowell Asteroid File this item sets the orbit database used when searching orbits see section 3 3 5 This is usually the Lowell Observatory asteroid database that is optionally installed when you install ECU i Web Addresses this item includes a drop down list of website addresses used by many of ECU s Internet features http www google com search web Search 3 10 Help The Help menu has seven entries The first selection User s Manual causes the user s manual in Adobe Acrobat format to be displayed This requires the free Adobe Acrobat Reader program to be installed on your computer The next two selections allow the user to easily acc
166. r the meridian 3 8 15 Telescope Type and General Settings The Telescope Type and General Settings menu selection presents a dialog box used to select the telescope or interface type and to control several telescope interface parameters Telescope Interface Type e 4SCOM Controlled Telescope ScopeSim Telescope Telescope Type and General Settings The telescope interface type selected with a pick list can be set to one Update Delay i Lar i S ge Center Scope Box of the list below C 0 05 seconds ere reen onl Ze 0 1 seconds Swap E W Buttons e Meade Classic LX200 and LXD650 750 mount DEE I Seep EE e Meade Autostar amp Il LX200GPS ETX LX90 LXD55 C asseconds I Scopeuses 320000 7 etc rae l Micro Guider III and 5 or Ouranos Interface dees Kee ASCOM Telescopes and Focusers Orion CTI amp JMI SGT MAX V2 00 and later Cancel JMI SGT MAX before V2 00 NGC MAX NGC Sky Vector Celestron Adv Astro Master Sky Engineering Sky Commander Losmandy DSC Meade Magellan Meade Magellan II Astro Physics GTO Mount Starmaster Sky Tracker Losmandy Gemini System Levels 1 to 3 Micro Guider or II Orion Intelliscope Object Locator BBAstroDesigns scope exe Vers gt February 2004 Vixen SkySensor 2000 in LX200 mode Micro Guider III Burke Gaffney Observatory COAA WinCTC Telescope Controller Note that in the text of this manual the Micro Guiders Ouranos interface Orion CTI SGT MAX NGC MAX
167. rch of the on line General Catalog of Variable Stars database hosted at the Sternberg Astronomical Institute in Moscow Russia The web site address used complete each search type is set in the Directory File Web Setup dialog see section 3 9 10 5 5 Other Buttons The Copy button copies the text contents of the dialog box to the clipboard so that it can be pasted into other applications The Precess button precesses the object s coordinates to the epoch of the current date Pressing the Center Object button will cause the sky display to be re drawn centered at the identified object Pressing the Place Target button will cause a default Field Target to be placed at the location of the selected object see section 3 4 18 1 If the telescope interface is enabled you will see the buttons Sync Scope and Center Scope buttons are used by the telescope functions See section 6 for details 6 Using ECU s Telescope Interface Functions ECU provides extensive support for the control many different types of telescopes and focusers equipped with computer interfaces In addition to those directly supported by ECU many more are supported through drivers provided by the ASCOM Initiative For the list of supported interfaces see Section 3 8 15 Included in the list of supported interfaces are Nova Astronomics own encoder interfaces The Micro Guiders The Micro Guider I and III are no longer available The cur
168. rd toggles between turning off the status box and setting it to the large size 3 3 Set Menu The Set menu allows the time geographic location Solar System calculation settings atmospheric refraction setting and sky colors to be adjusted Each is described in the sections below 3 3 1 Time The time can be set in one of three formats local civil time Universal time UTC set to your pce s system clock using local civil time or UTC The current time format used is identified in the Time menu selections sub menu by a check mark in front of the current mode The following sections describe the time settings 3 3 1 1 Enter Local Time The Enter Local Time menu selection presents a dialog box allowing the user to enter the year month date hour and minute in local time format The year can be from 4713BC to 9999 AD There is a year 0 so for example if the year 6 BC is to be entered 5 should be used for the year The time is always initialized to the current time Year Sunrise Month Local Standard Time Local Standard Time For you convenience you are reminded what type of time you are entering The choices are Local Standard Time Daylight Savings Time and Universal Time see section 3 3 1 2 If the Local Time Format setting see section 3 3 1 6 is set to AM PM the am pm buttons will be active and the hour must be in 12 hour AM PM format using the am and pm radio buttons otherwise the hour
169. rent model is the Micro Guider 5 For full details about this device see the Nova Astronomics website The Earth Centered Universe Pro V6 0 User s Manual Page 76 Even though many of the menu selections and mouse keyboard functions used by the telescope interface functions are shared among the many telescope interfaces they do operate differently and thus each general type of telescope interface is separately described in the sections below See section 3 8 15 to determine which section pertains to your telescope interface type Reference material for all of the telescope menu selections is found in section 3 8 6 1 Using a GOTO Type Telescope With ECU To use a GOTO type telescope with ECU you will need an RS232 cable to connect your telescope to your computer This cable is available from your telescope retailer or telescope manufacturer or you can often make one yourself according to the instructions in your telescope instruction manual Be careful in doing so however since the vast majority of problems that users report are directly attributable to incorrectly made cables Before attempting to use ECU with your telescope you should have read your telescope instruction manual thoroughly and be able to confidently use it stand alone without the aid of a computer 6 1 1 Initial Set Up The first time you use the GOTO telescope interface you will have to make some adjustments to ECU s settings Enter the
170. resents a sub menu of the selections Forward and Reverse These selections control the direction in which time is stepped when the animation mode is running A check mark will immediately precede the time direction setting 3 7 16 Enter Time Step The Enter Time Step menu selection presents a dialog box allowing the user to select one of the preset fixed time steps or to enter an arbitrary time step To set a preset time step select one from the drop down list box To set an arbitrary time S i Manual Step Step Fixed Step Step step first start by selecting Manual in the drop down list box then enter the LI LI desired step size as a number decimals are allowed The unit of time minutes hours days months or years used is selected by pressing the appropriate radio button Time Step This dialog box can also be selected by clicking the mouse over the area where the time step is displayed to the right of the time step arrows in the status area 3 7 17 Animation Speed The Animation Speed menu selection presents a dialog box allowing the user enter the number of seconds including fractions of seconds between animation mode updates 0 to 60 seconds If set to 0 then updates will be as fast as your computer can compute and draw them Animation Speed Update Speed s 0 000 7 Cancel 3 8 Telescope Menu The Telescope menu selection menu provides access to all of the telescope
171. rily on the status line below RA oee aew Op AEs OVA OS tinh e SEA Open File When the left mouse button is pressed over this button the dialog box which opens a new configuration files see section 3 1 1 is accessed Save File When the left mouse button is pressed over this button the current configuration settings are saved to the current configuration file name Print Chart When the left mouse button is pressed over this button a chart is printed see section 3 1 2 When the right mouse button is pressed over this button the Chart Setup dialog box see section 3 1 8 is accessed Undo When the left mouse button is pressed over this button the last operation is nullified and the sky display is re drawn This button is equivalent to the Undo menu selection see section 3 2 1 Zoom Out When the left mouse button is pressed over this button the sky display is zoomed out by a factor of two When the right mouse button is pressed over this button the sky display is zoomed out to the maximum field size of 180 degrees The Earth Centered Universe Pro V6 0 User s Manual Page 15 Zoom In When the left mouse button is pressed over this button the sky display is zoomed in by a factor of two When the right mouse button is pressed over this button the sky display is zoomed in to the minimum field size of 0 1 degrees North When the left mouse button is pressed over this button the sky disp
172. ring satellites until the communications link is established and as such require much longer to return valid data If you also wish to set your PC s time as opposed to just ECU s time check the corresponding check box 3 3 4 Solar System The Solar System menu selection provides a sub menu allowing several calculation options pertaining to the Solar System to be changed A check mark in front of a menu item indicates that it is enabled Each menu item is described below For maximum plotting accuracy with respect to the background stars set all check marks to their checked state except Nutation and Aberration This is very important when simulating eclipses or other astronomical phenomenon where the observer s geographic location is important 3 3 4 1 High Accuracy Calculations This menu selection controls the precision of the solar system calculations When checked positions reported are generally accurate to a few arc seconds or better 3 3 4 2 Precess to Sky Display This menu selection controls whether the Solar System object positions and the horizon line are to be adjusted due to the effect of precession of the Earth s axis of rotation to match the J2000 0 coordinates used by the sky display 3 3 4 3 Nutation This menu selection controls whether the Solar System object positions except for comets and asteroids are to be corrected for the effects of Nutation Nutation is at maximum a 9 arc second wobble in the
173. ry include drive letter and filename should be entered a The program used to display images this item controls which program is used to display image files This is used by Directory File Web Setup b the image button in the Identify Object dialog box see section 5 2 If it is left blank the current default Windows image viewer is used Note that with Windows Vista or Windwos 7 the default image viewer will not work this is because it is a DLL not an EXE file We recommend you download and install a free image viewer known as Irfanview www irfanview com The geographic location file this item specifies the name of the text file used to store the geographic location database The default file is location ecu Image viewing program User object files The geographic location file C Program Files ECU6 location The observing notes directory C Program Files ECU6 notes Iw Add date time to notes file The images directories C Program Files ECU6 images1 C Program Files ECU6 images2 The Lowell Asteroid file c program files ecu6 lowell orb Web Addresses The text editor program c The observing notes directory this item controls the directory used to store the observing notes files See section 5 3 for details d Add Date Time to notes file a check box controls whether or not the date and time are added to notes files e The text edito
174. s ECU is designed as an observing tool for the observing amateur astronomer but is equally useful to the armchair astronomer or other person interested in learning about astronomy Many of the concepts and terms used in this manual are common in amateur astronomy but may not be familiar to all users The author recommends the purchase of a good beginner book in astronomy as a guide to the understanding of the concepts provided by this program Two excellent books for beginners are 1 NIGHTWATCH An Equinox Guide to Viewing the Universe by Terence Dickinson which is available in most well stocked bookstores or libraries 2 The Beginner s Observing Guide by Leo Enright It is published by the Royal Astronomical Society of Canada available at www rasc ca bog ECU is operates on a wide variety of PCs in common use today including those that use Windows 2000 Windows XP Windows Vista and Windows 7 the later two in 32 bit or 64 bit versions This manual assumes that the user is familiar with the operation of typical Windows programs For those with older Windows operating systems V5 0 works with every Windows version from Windows 95 to Windows 7 only 32 bit versions The original version of ECU was written way back in 1992 because of the obvious lack of good reasonably priced astronomy programs Thirteen years later many software products still suffer from awkward user interfaces and or slow operation especially on older compu
175. s are in Standard Time Civil nautical and astronomical twilight are defined as when the Sun is 6 12 and 18 degrees below the geometric local horizon respectively These twilight times can be used to determine when it is dark enough to begin observing Usually by the time of nautical twilight in the evening it is dark enough to begin deep sky observing Note that the durations given for day night length and astronomical nautical dark are for the current day For example Night Length would be the number of hours between midnight and sunrise plus the number of hours between sunset and midnight on the same day The Earth Centered Universe Pro V6 0 User s Manual Page 61 The GO button to the right of each time causes that time to be set and the sky redrawn The Yesterday and Tomorrow buttons cause the date to be changed to the previous or next day respectively and the data updated 3 9 2 Julian Date Sidereal Time The Julian Date Sidereal Time menu selection presents a dialog box which displays the current Julian Date and Local Sidereal Time Julian Date Sidereal Time Julian Date 2455650 2861 Sidereal Time 03 05 3 9 3 Retrieve Digitized Sky Survey Image The Retrieve Digitized Sky Survey Image menu selection retrieves an image of the sky located at the current center of the sky display The size of the image is set using the DSS Image Size menu item see section 3 9 4 The image retrieved ap
176. se are not included in Object Reports and extended labeling is not available for them The size of stellar symbols drawn on the sky display is dependent upon the Stellar Brightness setting The Normal setting produces the most realistic displays Magnitude Limits Variable Stars TR m Double Stars CR User Objects I Auto Stellar Limit EN Stars D Linen Stellar Brightness e Normal Brighter Brightest Kl 10 0 Cancel leo gt 20 0 Comets Asteroids D Irlaanl Le 130 0 Deep Sky m m DIER however the Brighter and Brightest settings may product displays which are easier to see on notebook computers equipped with LCD displays especially when used in the dark F Use Advanced Limits as set below Advanced Deep Sky Limits Galaxies Bright Nebulae al EI D Deep Sky objects have an Advanced Deep Sky Limit Globular Clusters mode allowing individual limits for each of the size main EN gt object types By checking Use Advanced Limits the individual limits are used instead of the single Deep Sky magnitude limit Planetary Nebulae Open Clusters al E If a deep sky magnitude limit is set to 20 all objects will be displayed even those whose magnitude is unknown This menu selection can also be activated by pressing the left mouse button while the mouse is in the box which displays the current Magnitude Limits in the ECU status line by pressing the left mo
177. se Pro V6 0 User s Manual Page 27 3 3 1 2 Enter Universal Time Entering the Universal time is accomplished identically to entering the local time except that hour must always be entered in 24 hour format This menu selection can also be activated by pressing the left mouse button while the mouse is in the box which displays the universal date and time UTC in the ECU status line or when the right mouse button is clicked on the time toolbar button The keyboard equivalent to this menu selection is Alt U 3 3 1 3 Use System Time Selecting Use System Time causes ECU s time to become synched to your pc s system clock This will also cause the sky to update automatically once per minute therefore simulating the actual sky s movements See also section 3 3 1 5 After setting this mode you might wonder why the stars are not marching by as the time changes This is because the default behavior of ECU is to looks the center of the sky display on a specific equatorial coordinate as opposed to a specific local horizon coordinate This behavior can be changed see sections 3 7 11 and 3 7 12 3 3 1 4 Set Time to System Time Selecting Set Time to System Time causes ECU s time to be set to your pc s system clock Unlike the selection Use System Time the sky will not update automatically thereafter The keyboard equivalent to this menu selection is Alt N N stands for NOW See also section 3 3 1 5 3 3 1 5 PC Clock is UTC The
178. search string A web browser window will appear with the result of the search You must be connected to the Internet to use this feature The available types of web searches are a Web Search performs a usual web search using the site www google com b Image Search performs an image search using the site images google com This search is surprisingly effective at finding images of many astronomical objects c Retrieve DSS Image retrieves an image of the sky from the Digitized Sky Survey located at the object s location The size of the image is set using the DSS Image Size menu item see section 3 9 4 d SIMBAD Database Search performs a search of the on line SIMBAD Astronomical database hosted at simbad u strasbg fr Simbad This database provides basic data cross identifications and bibliography for astronomical objects outside the solar system e NED Search performs a search of the on line NASA IPAC Extragalactic Database hosted at nedwww ipac caltech edu This database contains positions basic data and over 12 400 000 names for 8 100 000 extragalactic objects as well as more than 2 700 000 bibliographic references to over 61 000 published papers and 63 000 notes from catalogs and other publications f AAVSO Search performs a search of the on line AAVSO database which can be used to access charts light curves and observation data for variable stars in the AAVSO database g GCVS Search performs a sea
179. sibility of the Software being used on both computers at the same time You may not loan or rent the Software to others If you purchased or received the Software as an upgrade of an earlier version you may not continue to use the earlier version nor may you sell or give away the previous version of the Software If used on a network provisions must be made to restrict simultaneous use of the Software to the number of copies purchased or to abide by the terms of a separate site license agreement or license certificate Reasonable backup copies are permitted The transfer of this license may be made at any time by notifying Nova Astronomics Trademarks and Copyrights The Earth Centered Universe ECU software is protected by the copyright laws of Canada and the United States of America as well as by the copyright laws of many other countries pursuant to international treaties The ECU software and this manual are Copyright 1992 2011 by David J Lane the owner of Nova Astronomics and its licensors All rights reserved No part of the ECU computer program documentation or related files may be copied reproduced photocopied or transmitted except as provided by the license agreements below ECU The Earth Centered Universe and Micro Guider are trademarks of Nova Astronomics Other trademarks are the trademarks of their respective trademark owners Limited Warranty This software and manual are distributed and licensed
180. sing an ASCOM controlled telescope and or focuser any connection errors are displayed within an ECU Status window that appears whenever an ASCOM error occurs Depending on the telescope or interface type either one or two windows coordinate and control windows may appear on the sky display and a cross hair may be drawn to show the current location of the telescope in the sky 3 8 2 Move Telescope to Chart Center The Move Telescope to Chart Center menu selection causes the telescope to be moved to or guided to the position occupied by the center of the sky display The keyboard equivalent to this menu item is Ctrl T 3 8 3 Sync Telescope to Chart Center The Sync Telescope to Chart Center menu selection causes the telescope to be synchronized or re aligned on the position occupied by the center of the sky display This menu selection may be disabled since not all telescope or interface types support this feature 3 8 4 Show Position The Show Position menu selection is a toggle that determines if a cross hair or Field Target see section 3 8 5 is drawn on the sky display to track the current position of the telescope in the sky 3 8 5 Use Default Field Target The Use Default Fields Target menu selection is a toggle that selects whether a simple cross hair or the default Field Target see section 3 4 18 1 is used to track the current position of the telescope The selected the Default Field Target follows the position of the te
181. ssed over this button the Object List dialog box see section 3 6 10 is accessed Enable Disable Telescope Interface When the left mouse button is pressed over this button the operation of ECU s telescope interface is toggled on and off When the right mouse button is pressed over this button the Telescope Type and General Settings dialog box see section 3 8 15 is accessed Place Target When the left mouse button is pressed over this button a Field Target is placed at the center of the sky display see section 3 4 18 3 When the right mouse button is pressed over this button the dialog box that controls the default field target parameters see section 3 4 18 1 is accessed Clear Target When the left mouse button is pressed over this button the last Field Target placed is cleared Chart Mode When the left mouse button is pressed over this button the sky display mode is cycled between Sky Atlas Local Horizon and Manual Sky Rotation modes see Section 3 4 1 The icon displayed indicates the current mode UP means Local Horizon mode N means Sky Atlas mode and means Manual Sky Rotation mode Flip Horizontal When the left mouse button is pressed over this button the sky display is toggled between no horizontal flip and horizontal flip see Section 3 4 15 Flip Vertical When the left mouse button is pressed over this button the sky display is toggled between no vert
182. stars Spectral Type Draw Labels Zoomed Out hich ill h their label I BV Color Planets Orbits a WI ave ST beige J Date Time Extended labelling 50 0 drawn except for Bright Star Magnitude Limit 4 0 Magnitude max field size labels Earth Distance 3 Variable and Double Stars Sun Dist bits onl Auto Place max 45 0 Other The Other check EE GE F Object Name IT Magnitude s Period Variable Type Separation J Phase boxes are provided for I Size controlling whether the Solar System constellation coordinate grid zenith horizon point N S E W etc ecliptic point VE vernal equinox SS summer solstice etc and user object labels are to be drawn The check box Draw Labels When Zoomed Out controls whether the major labels are drawn when the field size is larger than 60 degrees in height The final item in the Other box is an entry that controls the largest field size for which extended labels are drawn Extended labels include all labeling immediately to the left or right of an object The purpose of these final two items is to reduce the text clutter when zoomed out while maintaining the desired detail when zoomed in Deep Sky objects support a variety of labeling The object s primary and other name can be drawn to the right of the object To the left of each object a variety of extended information can be provided separated by commas including
183. sted j Class the class of the object Several professional classification schemes are contained here Trumpler type for open clusters Concentration I Detached strong concentration toward the center Il Detached weak concentration toward the center Ill Detached no concentration toward the center IV Not well detached from surrounding star field The Earth Centered Universe Pro V6 0 User s Manual Page 70 Range in brightness 1 Small 2 Moderate range 3 Large range Richness p Poor lt 50 stars m Moderately rich 50 100 stars r Rich gt 100 stars An n following the Trumpler type denotes nebulosity in cluster Shapley Sawyer concentration rating for globular clusters The values range from 1 to 12 smaller numbers are more concentrated clusters Vorontsov Velyaminov type for planetary nebulae Stellar Smooth disk a brighter center b uniform brightness c traces of ring structure Irregular disk a very irregular brightness b traces of ring structure Ring structure Irregular form similar to diffuse nebula Anomalous form no regular structure DS OV ROP eg Some very complex forms may combine two types Hubble type for galaxies E elliptical EO is roundest to E7 is flattest subgroups d is dwarf c is supergiant D has diffuse halo S Spiral a has tightly wound arms b has moderately wound arms and c has loosely wound arms SB Spiral with central ba
184. such as the Windows Notepad This text file should contain the image file names one per line and in total up to 50 images of each object can be specified Filenames specified can be either 1 unqualified containing no directory information in which case the specified image file must be in the same directory 2 fully qualified containing the complete location of the image file including drive and directory An example image text file named M42 TXT and stored in the c ecu4 images1 directory for the Orion Nebula M42 is m42 jpg an image file in c Program Files ecu6 images1 directory orion jpg another image file in same directory c ecu4 images m42 jpg an image file in another directory c images m42a jpg an image file in yet another directory c images m42b jpg an image file in same directory with different name d images m42 jpg an image file from the CD ROM image directory 5 3 Notes You can add your own notes about any object in ECU s database by clicking on the notes button in the Identify Object dialog box ECU then creates a file named after the object stores it in the notes directory see section 3 9 10 and starts a text editor program also see section 3 9 10 Below is a sample file which would be created for Messier Object 42 the Orion Nebula It includes both known names of the object Depending on the Add Date Time to notes file setting in the Directory F
185. t you are in the process of identifying an object If it is a hand then you can drag the sky around as you move the mouse The cursor is always a cross hair while moving about within the sky display If it is an arrow it is used for operating the menus scroll bars buttons or dialog boxes If it looks like the planet Saturn ECU is busy computing solar system positions If it is an hour glass ECU is busy performing some other task usually drawing the sky display The specific operation the mouse with each mouse button and with shift and control key is described separately in the next four sections 2 3 1 Left Mouse Button The left mouse button while the cursor is within the sky display is used for the following functions The Earth Centered Universe Pro V6 0 User s Manual Page 13 a Select an object if the left mouse button is pressed and ASP SEWS EE x released near the center of an object a dialog box called the Identify Object dialog box will appear identifying and describing the object Section 5 details the contents of the RA 05 55 10 3 5 9195275 hours Dec 07 24 25 7 406937 degrees S g Magnitude 0 5 Extinction N A Identify Object dialog box A cross hair will appear on the Air Mass N A Rises at 07 37pm screen identifying the object currently selected The dialog box is Azimuth 073 07 Transits at 02 12am Altitude 05 42 Sets at 08 44am always placed in the d
186. t If you are using an ASCOM telescope driver for the first time it is recommended that you select the Telescope Simulator driver which is just that a virtual telescope If you intend on using an electric focuser select ASCOM Focuser Setup see section 3 8 18 Use the drop down list to select a focuser driver then press the Properties button to appropriately configure the driver every driver is different so you are on your own to figure it out If you are using an ASCOM focuser driver for the first time it is recommended that The Earth Centered Universe Pro V6 0 User s Manual Page 81 you select the Telescope Simulator driver which is just that a virtual focuser And finally to enable the focuser be sure that Use ASCOM Focuser is checked see section 3 8 19 Save these settings permanently by using the File gt Save or File gt Save As menu selections 6 3 2 Enabling the Telescope Interface Prior to enabling the ASCOM telescope interface a number of steps must be completed as listed below AURE 6 Connect the telescope to your computer usually via an RS232 cable Turn the telescope on Align the telescope following the procedure outlined in its instruction manual Some telescopes require their RS232 interfaces to be enabled before they will respond to commands from the ASCOM driver Enable the telescope interface by selecting the Enable Telescope Interface menu selection see se
187. t mouse button while over the Place Field Target toolbar button can also activate this menu selection 3 4 18 2 Show Default Field Target The Show Default Field Target menu selection toggles whether or not the default Field Target is displayed at the center of the sky display 3 4 18 3 Place Field Target The Place Field Target menu selection places a Field Target at the celestial location that is at the center of the sky display The Field Target is placed according to the Default Field Target settings see section 3 4 18 1 Up to 100 Field Targets can by placed on the sky display If all 100 Field Targets have already been placed you will hear a beep Pressing the left mouse button while over the Place Field Target toolbar button can also activate this menu selection 3 4 18 4 Clear Last Field Target The Clear Last Field Target menu selection clears the last Field Target placed on the sky display If there are no Field Targets currently placed you will hear a beep Pressing the left mouse button while over the Clear Last Field Target toolbar button can also activate this menu selection 3 4 18 5 Clear All Field Targets The Clear All Field Targets menu selection clears all Field Targets placed on the sky display If there are no Field Targets currently placed you will hear a beep 3 4 19 Field Size The Earth Centered Universe Pro V6 0 User s Manual Page 40 The Field Size menu selection presents a dialog
188. t object The Cancel button then changes to a Prev previous button allowing you to back track to the previous object The dialog box can be terminated in four ways If the Cancel button is pressed the dialog box will terminate immediately If another object is selected the current dialog box will be replaced wth a new one If the left mouse button is pressed while the cursor is not near an object the dialog box will terminate Finally the lt ESC gt key can be pressed 5 1 Information Display The information common to all object types includes the Right Ascension and Declination in J2000 0 coordinates the Altitude and Azimuth with reference to the local horizon the Latitude and Longitude with respect to the Galactic Equator and the local time that the object rises transits is highest in the local sky and sets The Earth Centered Universe Pro V6 0 User s Manual Page 73 Two other parameters are given Air Mass and Extinction Airmass is an estimate of how much atmosphere you are looking through compared to straight up as airmass increases objects become dimmer more red in color and seeing atmospheric turbulence becomes worse The airmass increases as objects become closer to the horizon Extinction is an estimate in magnitudes for how much an object is dimmed due to the current air mass If more information is present than can be displayed in the available space a scroll M e bar is utilized
189. t section you can either undo just the last operation or up to the last 10 operations 3 2 2 Enable Multiple Undos The Enable Multiple Undos menu selection controls whether or not you can Undo just the last operation or up to the last 10 operations If a check mark precedes this menu item up to the last 10 operations can be undone This feature is provided primarily to allow users with older computers the ability to conserve memory which is required to store the Undo information This change to the Undo mode will be effective the next time ECU is started 3 2 3 Toolbar On The Toolbar On menu selection controls whether the toolbar a graphical button bar placed just below the menus is displayed or not See section 2 4 for details on how to use the toolbar If a check mark precedes this menu item the toolbar line will be displayed The keyboard equivalent to this menu selection is Shift T 3 2 4 Autowrap Toolbar The Autowrap Toolbar menu selection controls whether or not the toolbar is automatically wrapped to a second line if the ECU is not wide enough for it to fit The Earth Centered Universe Pro V6 0 User s Manual Page 25 3 2 5 Scroll Bars On The Scroll Bars On menu selection controls whether the scroll bars are displayed or not If a check mark precedes this menu item the scroll bars will be displayed See section 2 4 for details on how to use the scroll bars 3 2 6 Scroll Bar Mode The Scroll Bar Mo
190. telescope to your computer Section 6 is for you And finally Appendix A includes NASA Guide Star Catalog information that must be included to comply with the license agreement will allows its stellar database to be used in ECU 2 Introduction This section assumes that ECU is installed and running Mouse operations are integral to the operation of ECU and will be described in section 2 3 The on screen controls such as the toolbar and scroll bars will be described in section 2 4 and the keyboard quick keys are described in section 2 5 But first the on screen status displays and sky display will be described 2 1 The Status Information Displays ECU has two forms of status information displays First there is a configurable status line at the bottom of the ECU window This configurable status line is highly configurable see section 3 2 10 and can be enabled or disabled see section 3 2 9 by the user The information that can be displayed includes location local mean time universal time right ascension and declination azimuth and altitude field size animation step limiting magnitude and sky darkness The status line is the preferred method to display status information since it does not cover any of the sky display ECU Status SS The second method to display status information is using on of two status IST x boxes large and small The size of status box displayed can be configured by the user see section 3 2 11 to 3 2 13
191. tep since turning on your encoder interface you can press skip to ignore this step The Earth Centered Universe Pro V6 0 User s Manual Page 79 Align Altitude Declination Encoder Move altitude declination axis to either 90 degrees Skip Then select alignment method to continue 1 Star 2 Star Cancel Press either the 1 Star or 2 Star button or Cancel to abort the alignment process The sky display will re draw with the first alignment star positioned at the center of the screen and a message similar to that below will be displayed Point the telescope exactly at the first alignment star and press the Continue button Align Telescope Point telescope very accurately at Betelgeuse If you are performing a two star alignment the sky display will re draw with the second alignment star positioned at the center of the screen with another message displayed Point the telescope exactly at the second alignment star and press the Continue button The alignment process completes by calculating and displaying the estimated error of the alignment Ideally this value in degrees would be zero but an error of last than 1 or 2 degrees usually produces a good alignment Press the Yes button to accept the alignment or the No button to reject it Selecting the Enable Telescope Interface menu selection again will disable the encoder interface 6 2 3 Using
192. ters or netbooks that one might use in the field at the telescope ECU attempts to fill an obvious need at a reasonable price and has developed a loyal following of thousands of amateur astronomers all over the world A large amount of effort in software development has gone into The Earth Centered Universe over the years For those who are curious it is written in the Delphi XE language based on Pascal and is currently comprised of about 1100 pages 70 000 lines of program code This release includes a many enhancements over the previous versions ECU was first released as V1 1 in March of 1992 If you have purchased this copy of ECU from a retailer be sure to send in the accompanying registration card so you can be informed by when upgrades are available Note The best way to keep informed and to receive technical support is to join the ECUsers e mail list on the Internet see groups yahoo con group ecusers Nova Astronomics doesn t run or moderate this list it is user run and supported however the author does contribute to and respond to questions there The author would be most pleased in hearing your comments and suggestions for improvements to ECU or this manual I would also like to hear about any bugs which you detect so they can be fixed in a future release You can also be kept up to date by accessing Nova Astronomics Internet site shown on the cover of this manual The author can be reached at any
193. that you have selected to Read from the CD and the speed of your CD ROM drive it can take quite some time usually several minutes or perhaps much longer with a VERY slow computer and or CD ROM drive to complete this procedure Terminating the Read process prematurely can be done by ejecting the CD ROM usually done by pressing the button on the front of the drive This will cause a System Error which ECU will recover gracefully from after pressing the Cancel button twice The Earth Centered Universe Pro V6 0 User s Manual Page 63 The amount of disk space used is 19 bytes per star or for the entire catalog of about 15 000 000 stars about 285 Megabytes One other factor to consider when using older computers with small hard disks is that since many of the files are small the cluster size on your hard disk will have a great effect on how much space is actually used on your hard disk e g a one byte file may consume as much as of 32 768 bytes 3 9 10 Directory File Setup The Directory Setup menu selection controls the location of several files programs and directories used by ECU The items in this dialog box except the user filenames and Add Data Time to Notes File checkbox are stored in the ECU section of the ECU INI file usually located in the c ecu4 directory not in the normal ECU configuration file The following items can be configured In each case the full directo
194. the Earth than the value entered in astronomical units f Minimum Altitude this criterion selects only those objects that are higher above the local horizon than the value entered in degrees g Equatorial Position this criterion selects only those objects in a region specified in the sky by right ascension hours and declination degrees coordinates Filter Orbits Using Currently Loaded Orbits Search text in orbit name ORBIT NAME Include only numbered asteroids Faintest Magnitude 17 00 Brightest Magnitude om Min Solar Elongation nm Max Earth Distance lo gon V Minimum Altitude 20 00 F Equatorial Position North most Dec 90 00 South most Dec 99 00 West most RA 10 000 East mostRA 23 999 i Cancel 3 5 3 Enable All Orbits This menu selection enables all asteroid and comet orbits automatically This is equivalent the user manually checking the Enable Orbit checkbox for all valid orbits Valid orbits do not include those with names beginning with Comet Asteroid 3 5 4 Disable All Orbits This menu selection disables all asteroid and comet orbits automatically This is equivalent the user manually un checking the Enable Orbit checkbox for all valid orbits Valid orbits do not include those with names beginning with Comet Asteroid 3 5 5 Clear All Orbits This menu selection deletes currently loaded orbits from the orbit database 3 5 6 Del
195. the Smithsonian Astrophysical Observatory SAO Star Catalog the Tycho 2 Star Catalog and the Hubble Guide Star Catalog The YBSC SAO combination compliments the Tycho 2 Star Catalog Each of these databases is described in detail in sections 4 1 1 to 4 1 4 It also supports but does not include the US Naval Observatory s A 2 0 and SA 2 0 Star Catalogs see section 4 1 5 for details 4 2 1 Yale Bright Star Catalog The Yale Bright Star Catalog version 5 1982 contains 9110 stars to magnitude 6 5 It is contained in the files YBSC1 ECU YBSC2 ECU and YBSC3 ECU This catalog is designed to work in concert with the SAO Star Catalog see next section The following information is included for each star a Position J2000 0 epoch b Visual Magnitude nearest tenth c Proper Name if available d Bayer and Flamsteed Designation if available e HR Number The Earth Centered Universe Pro V6 0 User s Manual Page 65 f Henry Draper Number g SAO Number h B V Color i Spectral Type j Proper Motion 4 2 2 Smithsonian Astrophysical Observatory Star Catalog The Smithsonian Astrophysical Observatory SAO Star Catalog contains some 259 000 stars The Yale stars and those with the magnitude unknown were extracted leaving a database of 245 654 stars to about magnitude 9 5 It is included in the files SAO1 ECU and SAO2 ECU This catalog is designed to work in concert with the Yale Bright Star Catalog since there are n
196. the object s magnitude size and classification When the Label Only Messiers check box is checked labels will only be drawn for objects in the Messier Catalog This dramatically reduces the clutter if you are only interested in those objects The Magnitude Limit field is used to set the faintest objects which will have their labels drawn If its set at magnitude 20 even labels for objects will unknown magnitudes will be displayed These check boxes also control the User Objects see section 3 4 7 labels in which only the Object Name and Magnitude check boxes are relevant Planets Orbits Solar System objects support a variety of labeling The objects name is drawn to the right of the object To the left of each object a variety of extended information can be provided separated by commas including the current date and time the object s magnitude distance to the Earth and Sun phase and size Variable and Double Stars these objects support a variety of labeling The objects name is drawn to the right of the object To the left of each object a variety of extended information can be provided separated by commas including for variable stars the magnitude range period and variable type and for double stars the magnitudes of the components and the separation Auto Place maximum field size This item sets the largest field height for which labels are Auto Placed assuming this fea
197. time can also be displayed Trails for comets and asteroids are limited to the first 1 000 orbits e The number of steps used in the trail can be set from 10 to 500 f The trail history can be stored as either the objects Right Ascension Declination or it s Azimuth Altitude g The sky display can be made to lock on any solar system object or point with reference to the local horizon h The time can be manually stepped either forward or in reverse i All of the features of ECU can be used while the animation mode is running due to the multi tasking nature of Windows and thus of ECU Animation is paused however when you click on an object to display the Identify Objects dialog box or are using the mouse to select a new field size or drag to a different sky position Animation mode is best learned by experimentation however the menu items which control the animation mode are described in the sections below 3 7 1 Start The Earth Centered Universe Pro V6 0 User s Manual Page 51 The Start menu selection starts the animation mode If a check mark precedes the menu selection animation mode is running Animation mode can also be started and stopped using the corresponding tool bar button 3 7 2 Stop The Stop menu selection stops the animation mode The ESC key can also be used to stop the animation mode Animation mode can also be started and stopped using the corresponding tool bar button 3 7 3 Forward One Step
198. tion and direction of the optical encoders used with telescope interfaces that are of the encoder interface type see section 3 8 15 It also provides check boxes for Clock On the Test Mode and sound settings If you are using a newer version software version of 1 7 or later of the JMI SGT MAX or Orion CTI encoder interface refer to section 3 8 13 for instructions on how to program the unit If you are using any of the other encoder interfaces enter the actual encoder resolution for each axis of the telescope These are usually the same for each axis but do not have to be Be sure to include the effects of any mechanical Azimuth Miscellaneous components such as gears or pulleys Resolution IV Clock On Reverse Direction Test Mode The setting of the direction check boxes is telescope specific and requires some V PC Sound i Altitude experimentation that will be explained in section 6 2 Resolution 4000 Reverse Direction When Test Mode is checked a special encoder test mode is entered This mode s operation is explained in section 6 2 1 Encoder Interface Settings The Clock On check box should always be checked except if your telescope is a Dobsonian mounted on a Poncet or other equatorial table Consult Nova Astronomics if your telescope is in this category and you require guidance When PC Sound is checked the PC s speaker is used for the sound produced w
199. ts menu selection presents a dialog box allowing the user to download up to date orbital elements of comets and asteroids from the Internet Orbit data must be formatted in ECU s orbit format Important Note A software firewall running on your PC may prevent this feature from working If you have difficulties try disabling your firewall or adjusting its settings The drop down list provides several pre determined sources of orbit data and three user defined sources The first three sources retrieve data from the International Astronomical p S Download Orbits from the Internet Ki Union s Minor Planet Center and provide data for currently observable comets critical minor planets asteroids whose orbits need more Orbit Category observations and near earth objects NEOs and unusual minor planets For Critical Minor Planets FromIAUCBAT BI information about these data see cfa Web Address http cfa waw harvard edujiaujEphemer www harvard edu iau Ephemerides Soft10 html File willbe saved to c program Files ecu6 comets orb The fourth source retrieves the entire Lowell Observatory Orbit Database Load Orbit File After Download direct from Lowell Observatory This database contains more than 500 000 Note Be sure you are connected to the internet before asteroids and growing every day therefore it can take a very long time to gt download It is generally only necessary to update this file about every six
200. ture is enabled see section 3 4 16 3 4 16 Auto Place Labels The Auto Place Labels menu selection toggles whether or not most text labels are automatically placed to avoid overlapping text on the screen or printed chart A line is drawn between the moved text and the object that it pertains to The Earth Centered Universe Pro V6 0 User s Manual Page 38 Screen updates can be quite a bit slower with Auto Place Labels enabled so the Auto Place maximum field size item in the Labels dialog box see section 3 4 15 can be used to set a reasonable maximum field size to auto place labels 3 4 17 Screen Fonts The Screen Fonts menu selection provides a sub menu allowing the screen fonts to be controlled 3 4 17 1 Set Screen Fonts The Set Screen Fonts menu selection presents a dialog box allowing the user to Reeg customize the fonts used in the sky display A list box is presented containing the 9 text items whose fonts can be customized Constellation Labels Star amp Deep Sky Labels scre Solar System Labels Extended Object Labels The user is to select the desired item followed by pressing OK The standard Hazon Labels Windows font control dialog box will then be presented The font font style and Ecliptic Point Labels size can be selected Note that only TrueType fonts can be used After exiting the Pr op ES dialog box by pressing OK the Set Screen Fonts dialog box will be re drawn User
201. use button while over its toolbar button or by pressing the right mouse button while over the variable or double stars toolbar buttons The keyboard equivalent to this menu selection is Alt M 3 4 4 Stars The Stars menu selection contains settings which control the operation of all of the stellar databases Pressing the right mouse button while over either the stars or magnitude limits toolbar buttons can also activate this menu selection Active Star Databases Yale Bright Star Catalog SAO Star Catalog Tycho 2 Star Catalog Mag lt 6 2 Tycho 2 Star Catalog Mag gt 6 2 Hubble Guide Star Catalog USNO 4 2 0 or 54 2 0 Star Catalog Active Star Databases Each of the six stellar databases that are included or supported by ECU can be individually enabled or disabled with their corresponding check box For more information about these databases and for some advise on which databases you should use see section 4 1 In particular some of these databases Yale SAO vs Tycho 2 bright and faint are designed to work together in pairs to ensure nearly complete magnitude coverage without duplicated stars Hubble Guide Star Settings Access ECU CD ROM Plot Non HGSC Stars Access STSCI CD ROM IT Cache to Hard Disk STSCI CD Drive D wel Cache 4 128 blks 8 ECUCD Path C gsc C Program Files ECU6 gsc US Naval Observatory 4 2 0 or S4 2 0 Settings Cache Path Hubble Guide Star Settings C Program Files ECU6
202. within it For objects cataloged from more than one photographic plate an entry was made from each image and all entries for the same object were given the same unique name Paper III also reviews the database for compiling statistics of objects with multiple entries and the details of the organization and structure of the GSC including the provisions for assigning unique names for cataloging objects lying in the plate overlap regions for rapidly indexing positions against regions and for recovering the original plate measurements The separate count statistics for stellar and non stellar objects on a plate by plate basis are provided in the supporting tables User Interfaces Utilities and Astronomical Applications The all sky collection of Schmidt plates that were digitized archived to optical disc and processed to generate the Guide Star Catalog GSC constitute a general image resource for astronomical research This data set combined with the computing environment provided by the Guide Star Astrometric Support Package GASP major elements of which are exported within the Space Telescope Science Data Analysis System provides random access to a digital image in any part of the sky The GASP environment also supports access to the GSC and to other major astronomical catalogs 3 REVISIONS IN GSC 1 1 The GSC 1 1 activities performed to address a number of known problems in GSC 1 0 are summarized here and described in detail in the text f
203. wn with the current telescope position at the center of the sky display You should also read about the Auto Track Telescope feature in section 3 8 8 The type of indicator displayed depends on the state of the menu selection Use Default Field Targets see section 3 8 5 If checked the position display will be the programmable field circles or rectangle as described in section 3 4 18 1 If not checked a fixed size cross hair is used Coordinate Display if the menu selection Show Coordinates see section 3 8 6 is enabled a window will be visible which displays the real time equatorial coordinates of the telescope Manual Telescope Control if your telescope is goto capable and the menu selection Telescope Control see section 3 8 9 is checked a window will be visible which allows manual control of the telescope motions and focus To manually move the telescope first ensure that Focus Mode is not checked then the Move Size in arc minutes then press the desired motion direction button Several other functions are also supported in the control window The Park button usually moves the telescope to its park location and turns off the RA drive What this you re your telescope can depend upon the driver its settings and the telescope itself The Unpark button usually just turns on the RA drive but does not move the telescope The Set Park button with some telescopes sets the location that subsequ
204. xample to search for 4 Corona Borealis f 4 crb would be entered Capitalization and spacing are not important Deep Sky Objects deep sky objects can be searched by entering either their primary name or Other Names as stored in the SAC deep sky database see Section 4 by any of the up to five catalog numbers available for PGC galaxies or by any of the three catalog numbers available for Wallace SEC planetary nebulae For example the Andromeda Galaxy can be found by entering either its official name NGC224 or its common name other name M31 Variable Stars variable stars can be searched by entering the variable star designation such as AL Gem or V 1024 Ori Double Stars double stars can be searched by entering the discoverer designation such as STF 1744 User Objects user objects can be searched by entering the text associated with the objects comment field see section 3 4 7 3 6 2 On RA Dec The Earth Centered Universe Pro V6 0 User s Manual Page 47 The On RA Dec menu selection presents a dialog box allowing the user to enter a specific Right Ascension and Declination to center the sky display on Pressing the left mouse button while the mouse is in the box that displays the current Right Ascension Declination in the ECU status line can also activate this menu selection Center on RA Dec Right Ascension H hrs 134 min 20 23 sec Declination 3 deg 42 mi
205. y mostly with check boxes Pressing the right mouse button while over the labels toolbar button can also activate this menu selection The label settings are divided into six groups that are described separately a Stars support a variety of labeling The primary designation which is drawn to the right of the star can be either or neither its common name for a select group of bright stars or its Bayer Flamsteed designation either a Greek The Earth Centered Universe Pro V6 0 User s Manual Page 37 b c c d letter or a number The Greek letters themselves will be drawn if the Symbol font is present on your system and Use Fonts see section 3 4 17 is enabled To the left of each star a variety of extended information can be drawn separated commas including the star s magnitude Yale number SAO number HD number Hipparcos number spectral type and B V color Labels Stars Iw Common Name Bayer Flamsteed Desig Magnitude Yale Number 540 Number Deep Sky Iw Object Name 7 Other Name Iw Magnitude Size Classification Other Solar System Constellations Equatorial Grid Local Horizon Grid Zenith Horizon Points Cancel HD Number F Label Only Messiers Ecliptic Points D in EI Hipparcos Number GH Galactic Pole Points Magnitude Limit 10 0 The Magnitude Limit field is I Distance agnitude Limi oct used to set the faintest

Earth Centered Universe Pro V6.0

Contents

Download Pdf Manuals

Related Search

Related Contents