baby watch g - produktinfo.conrad.com
Contents
1. Motion detection settings 1 Select Ambient Light with w or A and select either Light ness or Darkness with lt or gt depending on the condition of the environment 2 Select the Movement Sensitivity line with the v or A button and adjust the sensitivity with or gt 3 Select the Movement Rate line with the w or A button and adjust the movement rate with or gt Note m Movement rate is the proportion of the size of the moving object to the movement area When this value is selected higher detection will be enabled upon movement of large objects When this value is selected lower detection will be enabled upon movement of small objects 4 To adjust the area of detection select Movement Window line with w or A button and confirm with OK button By using VW VAC P E OF gt button select the position of the detection window With e red ee green eee yellow and eeee blue buttons adjust the dimen sions of the detection window To end the setting process press button ENGLISH 29 SETTINGS Deactivation Activation of the Sound Detection 1 Ifthe notification should be only made by video monitoring select the x character in the box next to the Enable Sound Detection with w or A and delete it with OK Sound detection is disabled Note2. ASSEMBLY AND CONNECTION ___ 4 Drill the holes on the wall and insert the given plugs into these holes 5 Fix the mounting bracket with the 4 supplied screws to the wall 6 For the WLAN operation screw the WLAN antenna onto the de vice or for LAN operation connect the LAN cable to the Ethernet socket Note m LAN cable is supplied with the device 7 Plug the power cable to the DC 12V socket 8 Adjust the camera position onto the mounting bracket and tighten the safety screw A 9 Plug the DC 12V adaptor to the wall socket Operation LED lights up soon and the camera tests the motors automatically 10 Connect the LAN cable to an unused socket on the modem or router Warning Do not connect the camera to the LAN input of the television set Camera and television should be connected to each other over modem or router as to be on the same network Notes m Remove the lens cover m Adjust the camera to the obser vation position by using the but tons on the remote control mSee Adjusting Sharpness sec tion on page 27 to adjust image sharpness ENGLISH 23 NETWORK INSTALLATION Connect the camera to the home network and sign in In order to ensure that the camera view is displayed on your TV screen over the BABYWATCH applica tion your TV and Camera should be connected to the same network You can connect your camera to the home network with the cabled LAN
3. m In order to restart the sound detection select the box with v or A and adjust the x character with OK Adjusting the sound sensitiv ity 1 Select the line Sound Sensitivity with W or A 2 Select the sensitivity level with Or gt Setting the period of time the notification will be dis played on the screen 1 Select the line Event Display Timex line with v or A 2 Select the desired option with lt or gt 30 ENGLISH Saving the Settings 1 Select the push button OK with W or A and confirm with OK Note m f the changes will not be saved select the push button CANCEL lt with W or A and confirm with OK Displaying and reporting notifications Live image is displayed subject to the selected setting and the action in the room being monitored In that case a message will be displayed High sound detected Movement detected SETTINGS Changing the password 1 While live streaming is shown on the screen select the Set tings menu with e red 2 Select the Camera Settings line with W or A and confirm with OK Connected camera is viewed 3 Go to the camera settings with OK 4 Select the Change Password line with w or A and confirm with OK 5 Press OK and enter and save the current password using the keyboard 6 Select the
4. While live streaming is shown on the screen select the Set tings menu with e red 2 Select the Search Camera line with W or A and confirm it with OK After a while icons of the found cameras and IP address will be displayed 32 ENGLISH Selecting other cameras in the local network 1 While live streaming is displayed on the screen select the Settings menu with the e red 2 Select the Camera Settings line with W or A Icons of all of the cameras connected to TV and their IP addresses will be displayed 3 Select the camera which you want to view with w A or gt and go to the camera settings with OK 4 Select the Start Stream line with v or A and confirm with OK Live streaming of the camera is shown on the screen INFORMATION Service notes for the au thorized sellers CE BabyWatch set may only be operated with the power cable adaptor supplied with the set This product meets the following EU requirements Energy consumption values and classes were determined in accord ance with specifications 2009 642 2010 1062 and also guidelines EN62087 and EN62301 pursuant to directives 2009 125 EC and 2010 30 EU from the European Union Grundig declares that this product complies with the EU Regulation 1999 5 EC and 2011 65 EU Complete and accurate text of the Declaration of Conformity DOC can b
5. BABY WATCH G BCAM 01 AUS GUTEM GRUND GRUNDIG SAFETY AND INFORMATION Safety m This device should not replace parental supervision of your chil dren It is designed to assist you as parents for supervision of your children m In order to avoid the risk of chok ing with power cable the video camera should be installed out of reach of children m This video camera is not a toy do not let the children play with it m This device is for transmission of image sound signals within a house or building Any other use is strictly prohibited m Protect the camera against rain humidity dripping or splashing and heat temperature direct sun light etc m Use the camera only under aver age weather conditions Do not use the device under direct sun light for a long time m Do not drop the camera m Never supply power to the DIR DO sockets m Do not dismantle the camera body under any circumstances Warranty claims are excluded for damage resulting from improper usage m Do not use any cleaning agent dur ing the cleaning process as these may damage its body Wipe the camera with a clean and dry cloth m Unplug the device before cleaning m Use the power supply delivered with the product only BABYWATCH Monitoring camera ensures you to keep an eye on your children For this you need a local network access and a GRUNDIG television on which the BABYWATCH appli cation is installed Inf
6. New Password line with w or A and confirm with OK 7 Enter a new password max 22 characters and confirm it 8 Enter the Retype Password line with W or A and confirm with OK 9 Enter the new password again and confirm it 10 Select the push button Change with v or A and adjust it with OK Note m f the new password will not be saved select the push button Cancel with w or A and confirm with OK Selecting the image trans mission type 1 While live streaming is shown on the screen select the Set tings menu with e red 2 Select the Video Typex line with W Or AA 3 Select the desired mjpeg or rtsp image transmission type with the lt or gt mjpeg Video codec with compressed image recom mended for the WLAN con nected works rtsp Real time transmission and minimum compression video codec recommended for the LAN connected works Note m If you face problems with rtsp on wireless connection change your setting to mjpeg ENGLISH 31 SETTINGS Selecting the background image for the menu 1 While live streaming is shown on the screen select the Set tings menu with e red button 2 Select the Theme line with v or A 3 Select the desired background image with or gt Searching for the other cameras in the local net work 1
7. You can select the dimension of the inset image to be displayed on the screen from the Widget mode 1 Select the Application View Mode with 2 Select the Widget Mode with lt or gt and confirm with OK 3 To decrease the size of the inset image press e red and to increase its size press eeee blue 28 ENGLISH Turn the picture vertically 1 While live streaming is shown on the screen turn the picture vertically with e green Turn the picture horizon tally 1 While live streaming is shown on the screen turn the picture horizontally with e yellow End the Babywatch func tion 1 Select the Application View Mode with 2 Select Close with the lt or gt and confirm with OK SETTINGS Notification mode options Deactivation Activation of the Motion Detection Function 1 While live streaming is shown on the screen select the Set tings menu with e red 2 Select the Detection Settings line with w or A and confirm with OK Menu is displayed 3 If the notification should be made only by sound select the x character in the box next to the Enable Motion Detection with V or A and delete it with OK Motion detection is disabled Note E In order to restart the video monitoring select the box with v or A and adjust the x character with OK
8. e accessed via the GRUNDIG page on www grundig com down load doc This device can be used in the following countries without any limitations AT BE BG CH CY CZ DE DK NO PL PT RO SE SI SK TR This device can also be used in the countries outside Europe Please be advised of the follow ing limitations for the following countries For the customers in France Outdoor use of the device is limited with 10 mW EIRP at 2454 2483 5 MHz frequency range Use for the military radio positions Re regulation of the 2 4 GHz fre quency was put into effect in recent years in order to allow the current less stringent regulation Transition to the full implementation has been planned as 2012 For the customers in Italy For the private uses apart from the personal houses there is general approval requirement for public use For the customers in Nor way This subparagraph is not valid for the geographical area up to 20 km from the center of NyAlesund For the customers in Russia 1 FHSS modulated SRD EH Maximum 2 5 mW EIRP ENGLISH 33 INFORMATION E Maximum 100 mW EIRP For the collection of and compliance with the telemetry data and the cal culation systems the device is al lowed to be used in the outdoors where it is located at the same height without any limitation In the similar practices which are listed above the location height of the de
9. h OK After a while available wireless networks will be displayed on the screen 7 Select the wireless network which the TV is connected to by using V DAC XEK and gt and con firm with OK button Network name and entrance menu with password will be dis played 8 Select the Password line with the w or A and press OK Enter by using the keyboard the wireless network password and close the keyboard with lt 9 Select Yes push button with w and confirm with OK 10 To return to the Settings menu press lt am 11 Remove the Network cable LAN led on the camera will flash quickly Wireless network connection is made now 12 In order to view the live stream ing of the camera on the screen press e red OPERATION OF THE CAMERA Adjusting the Image sharp ness 1 Adjust the image sharpness by using the adjustment ring on the camera lens Selecting the viewing mode 1 While live streaming is dis played on the screen select the Application View Mode menu with Options Full Screen Mode live streaming is displayed 4 Widget Mode live treaming is displayed as a small image in the as full screen valid television show Dimension and position of this small image can be selected Notification Mode streaming is displayed only when a movement is made or a sound is transmitted My Applicatio
10. ical modifications
11. ns func a tion ends and the device returns to the Quick Apps menu or My Ap plications page Close function ends and the device returns to the current television show 2 Select the desired mode with lt or gt and confirm with OK Changing the camera angle Camera angle can be set to the Full Screen Mode for the Live stream n ing 1 Select the Application View Modex with 2 Select the Full Screen Mode with lt or gt and confirm with OK 3 Adjust the desired camera angle with VW DAC P E OF D Note m The camera can be reset to the starting position 90 horizon tal vertical To do this select the Settings menu with e red select the Camera settings row with v or A and confirm with OK Press OK again select the Reset Position row with w or A and confirm with OK Close the settings menu with lt and switch to the live streaming with e red ENGLISH 27 OPERATION OF THE CAMERA Selecting the position of the inset picture In the Widget mode you can select the position at which the inset image is displayed on the screen 1 Select the Application View Modes with 2 Select the Widget Mode with lt or gt and confirm with OK 3 Select the desired location with V lt DAK OF gt C Selecting the dimension of the inset picture
12. or wireless WLAN connection If you are using a cabled LAN connection please refer to the part titled Connection of the camera with the LAN connection in this section If you want to use a wireless network WLAN follow the instruc tions described in the section Op eration on the Wireless Network WLAN Warning m Malicious software may pen etrate through your personal local network via Internet and abuse your audio visual files For such situations secure your personal local network Ensur ing the security of the personal local network is under the re sponsibility of the user 24 ENGLISH Connection of the camera with a LAN connection and signing in Note m Many home networks are Dy namic Networks If you have a dynamic network you must use a DSL modem that supports DHCP If the DHCP server of the modem does not work the camera cannot receive an IP address 1 Switch on your television 2 Select the Quick Apps menu with 3 Select the BabyWatch applica tion with W or A and confirm with OK Help page will be displayed soon which shows how the in stallation will be made adaptor to start setup of the camera will light up Upper part of the camera will sable to the camera and the other to the modem or router o 4 With the 4 exit the Help page Settings page will be displayed NETWORK INSTALLATION 5 Select
13. ormation about the camera 3 Megapixel resolution m Large pivot range and wide angle of inclination m Supports IEEE 802 3 Ethernet Standard Notes m When the camera is used with wire less network connection audio video quality may be impaired m When the television is switched off or the BABYWATCH applica tion has not been started in any mode yet no sound or video image can be received from the camera ENGLISH 19 OVERVIEW A B c 3 9 D 3 35 toni 20 ENGLISH OVERVIEW A A i nh Q Camera lens and its cover Brightness sensor determines the brightness of the location of the camera Infrared LEDs turn on if the brightness at this location is not sufficient Night Vision mode Adjustment Ring is used to cor rect the image clarity Microphone LAN Indicator on it means that the LAN con nection is activated flashes it means that data transfer is in progress off it means that the LAN con nection is deactivated Operation LED turns on when the camera is in operating WLAN antenna input socket Ethernet it is a socket to con nect to the home network with a LAN cable 5 Z DO DIR no function WPS Reset is the button to record the camera
14. r and save admin pass word as explained in the notes about data entry 11 Select the push button OK with w and confirm with OK Live streaming of the camera is shown on the screen Note m If the modem is switched off and on IP address of the camera may change then repeat the steps from 5 to 11 ENGLISH 25 NETWORK INSTALLATION Registration of the Cam era via the Wireless Net work WLAN Notes mln order to make the wireless network WLAN settings first camera should be connected to the router over the cabled local area network m Many home networks are Dy namic Networks If you have a dynamic network you must use a DSL modem that supports DHCP If the DHCP server of the modem does not work the cam era cannot receive an IP 1 Switch on your television 2 Select the Quick Apps menu with 3 Select the BabyWatch applica tion with W or A and confirm with OK Live streaming of the camera is shown on the screen 4 While live streaming is shown on the screen select the Settings menu with the e red 5 Select the Camera Settings line with the W or A and confirm with OK The camera which is connect ed to the network via cabled LAN is displayed on the screen 26 ENGLISH 6 Enter the camera settings with OK and select the Set Wire less Connection line with the w or A and confirm wit
15. the Search Cameras line with W or A and confirm it with OK After a while the found camera icon and IP address will be displayed Note m f camera search fails For detailed search press e red or if the detailed search fails too for Manual IP entry press ee green 6 Confirm the found camera with OK Add Camera menu will be displayed 7 ln order to display the on screen keyboard press OK Notes for data entry Data are entered with the pop up keyboard Select the necessary letters numbers with v A lt or gt and confirm with OK m To toggle between uppercase and lowercase letters select Shift and confirm with OK m Keyboard mode can be changed by pressing e red m You can change the language of the keyboard key assignments with ee green Last character number can be de leted with eeee blue All entries can be deleted with eee yellow m f the entry of the current line is completed close the keyboard with lt ez 8 Enter and save the name of the camera according to your pref erence as explained in the notes about data entry 9 Select the Password line with v and open the pop up key board with OK Notes m Camera password has been set as admin as standard factory default m We recommend you to use a password belonging to you see page 31 Settings section 10 Ente
16. to the router If Router WPS supports you can make wireless connection by pressing and holding the button on the camera for 3 to 10 seconds while pressing the WPS buttons on the router concur rently in order to reset the camera to its factory defaults press and hold the button for more than 10 sec onds all settings will be deleted SD no function DC 12V is a connection socket for the power supply delivered with the device Audio Out no function ENGLISH 21 ASSEMBLY AND CONNECTION You can position your GRUNDIG camera in a suitable place or mount it onto the wall Packaging of the device contains an mounting brack et and fixing elements Wall mounting Notes Base unit should be fixed and it should draw the static load m For the wall superstructures for example for the wooden or hollow walls use appropriate plugs and screws For sug gestions please consult your authorised dealer m Installation place should be near a power outlet m f the camera is not to be fixed the bracket B and fixings are not required Please start from step 6 22 ENGLISH 1 Remove the safety screw in the mounting bracket A and loosen the connection fittings B 2 Insert the fixing B to the camera base and tighten it with the sup plied screws C 3 Determine the installation place of the camera and mark the places where holes will be drilled on the wall by using the mounting kit
17. vice should not exceed 10 m E For indoors it is maximum 100 mW EIRP 2 Other broadband modula tion systems such as SRD with DSSS and FHSS m Maximum average value EIRP signal density at 2 mW MHz Maximum 100 mW EIRP m Maximum 100 mW EIRP For the collection of and compliance with the telemetry data and the secu rity systems the device is allowed to be used in the outdoors where it is located at the same height without any limitation m Maximum average value EIRP signal density at 10 mW MHz Maximum 100 mW EIRP Indoors For the customers in Ukraine EIRP 100 mW with integrated antenna and amplification factor up to 6 dBi 34 ENGLISH Environmental note T This product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its life It should be disposed of in a collection point for recycling electrical and electronic devices This information is indicated by a symbol on the product in its user manual and on its packaging For information about the collection points please refer to your munici pality officials By recycling used devices you make a significant contribution to the protection of our environment Technical data Power supply DC 12V 2A Dimensions and weight WxHxD 105 x 123 x 107 mm Weight approx 305 g We reserve the right to make techni cal and opt
Download Pdf Manuals
Related Search