Digicom MAP - Swissphone
Contents
1. SWISSPHONE Digicom MAP User manual master data management and station display for version 1 6 1 sence Digicom MAP 18 102012 13 13 16 ADL Personenbergung Meerweg 2 Musterstadt Einweisung durch FW vor Ort Alarmdisplay mit St rkemeldung Uhrzeit 16 52 Alarmzeit 16 52 ee 1 Sota o 2 gt 00000 I ur KN SE Ee 1 as 0 Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 1 of 49 VU SWISSPHONE Introduction Digicom MAP is part of a RES Q solution for alarms with confirmation It has been developed in house by Swissphone for the confirmation server see Fig 1 and com prises the following functional elements e R module as the interface to the RES Q terminal via GSM e Database with the master data on the terminals forces and their structure e Web application with user interface for displaying confirmations and master data manage ment insatzleitstell R ckmeldung L Uplink GSM a R Modul Fig 1 General overview of RES Q solution Alarms with confirmation Digicom MAP specifications e Confirmations received and processed e Master data database and management e Confirmations displayed in a table as well as on the map as an option e Option of exporting the alarms list e Status messages displayed in a table as well as on the map as an option e Option of exporting the current status messages e Strength message analys2. 2 1 General Fig 2 Digicom MAP GUI Hidden pushbutton Pushbutton Image graphic Selection list Field name Mandatory input field flagged with an asterisk Input field Dropdown list Checkbox 0 Pushbutton 1 Form een KC Ee 2 2 Pushbuttons New Edit Delete Fig 3 Pushbuttons for entering editing deleting entries Pushbuttons with white writing are active and can be used Pushbuttons with grey writing are inactive and cannot be used 2 2 1 New Creates a new resource 2 2 2 Save Saves the data entered TN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 10 of 49 VU SWISSPHONE 2 2 3 Edit Opens the selected existing data record for editing The changes made are only adopted after Save has been pressed 2 2 4 Cancel Cancels the operation If the user wants to add a new resource the data on the form that has already been en tered is discarded If the user wants to edit existing data the changes to the data record are not adopted 2 2 5 Delete Deletes the selected data record from the database The data is deleted without a query after Delete has been pressed ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 11 of 49 VU SWISSPHONE 3 Technical requirements 3 1 Hosting For more information on the technical requirements for hosting the Digicom MAP web services please refer to the Digicom MAP Super User manual 3 2 Op
3. 24h old it Last measured position of the forces position is older than 24h 5 4 1 Exporting the status messages DoF 2m Map dal 2012 Google Tu Alarme G Status Zeitstempel Mekdungstext 18 10 2012 16 52 02 THL Auffahrkolison A3 KM 129 gt Z rich 18 10 2012 13 13 16 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW var Ort ADL Personenbergung Meerweg 2 Musterstadt Einweisung durch FW wor Ort BRAND Grossbrand Schreinerei Gl ckliche S ge S gestrasse 1 Anfahrt ber ROG 713 BRAND Grossbrand Schreinerei Ghickiche Sage Sagestrasse 1 Anfahrt ber Rud me SEIN EE Kaes Mo Di Mi Do Fr Sa So Mo Di Mi Do Fr Sa Se 1 29 30 ii 29 30 2 2 2 BZ 483 6 amp 2 B 9 10 11 12 13 14 11 12 13 14 15 16 17 18 19 20 21 15 16 17 18 19 20 21 22 23 24 25 26 27 28 22 23 24 25 26 27 28 25331 2344 2035 21 2 3 4 Fig 7 Export function with calendar Export operations are executed by pressing Export The status list can be exported and saved if required Data is exported in XML format in order that it can be imported easily into other systems The correct data format can be validated by means of an XSD Schema file The XML files can also be imported into MS Excel etc The status messages do not have a history Only the existing current profiles can therefore be viewed and saved It is therefore not possible to find out retrospectively when which profile was used Digicom MAP User manual Version
4. 5 1 1 Hosting with Swissphone Telecom AC 14 5 1 2 Hosting with a different system Drovider cc cceecceceeeeeecaeeeeeeeeeeeeeseeeeeesaeeeeeeas 14 5 1 3 Hosting as an autonomous solution in the fire station 14 92 e ele lee OS SE 14 2 1 EE TN 15 5 2 2 Login data write acrcessg nenne nnnnnennnnnn 15 5 23 LOGIN data read ACCESS anne eek hen 15 3 AMENA CONA eee 15 5 4 Status queries and status messages uneennennnennennnnnennnnnnnnnnnnnnennnnnnennnnnnnnnnnnnnennnn nennen 16 5 4 1 Exporting the status messages 17 KN PE Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 4 of 49 fen S SWISSPHONE 59 Aldam MESSE EEE EE 18 551 EXPOMING Bin LEE dE 19 5 6 Strength message availability report 20 e ENEE le Men Ee GEET 20 562 AVGIADININY TOD OW dE 21 6 Master data management 22 6 1 Digicom MAP management quick reference goude 23 6 1 1 Recommended application workflow 23 6 1 2 Preparing personal details and alarm data 24 6 1 2 1 Managing terminals RES Q poagers 24 6 1 2 2 Managing forces device user 24 6 1 2 3 Creating Iunchons oooaannnnonannnnneannnnonennnnnnnnnnennrnnnnnnrnnnnenrnnrneennnne 24 6 1 2 4 Group RICs assigning the RICs and forces to the groups 24 6 1 2 5 Other UNGUONS E 24 7 Reference manual 25 7 1 Creating a NEW CUSIOMET WEE 25 DMN gl e VE 26 F SN G EEE EE 26 7 1 2 1 Back GhaANNGINOW AD urene euere 27 7 1 2 2 Back hannelGm allan 27
5. Reference manual Alarmdisplay with strength message Time of day roup availability OR Total SC Battalion SR HE a adder AE Engine Legend Unknown ON duty OFF duty Fig 14 Alarm display with strength message The user management screen is shown by clicking on the Swissphone logo Depending on the user rights some menu items may be hidden from the user account or they may be uneditable More information is provided in Section 6 7 1 Creating a new customer Creates a new customer client At least one customer must be entered in the system Fields with an asterisk are mandatory Every customer that is created is automatically also entered as a user This user has administrator rights As managing forces groups and terminals does not require administrator rights additional users should be created with restricted rights read or write access More information on creating users can be found in Section 0 CN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 25 of 49 SWISSPHONE bei localhost Eunssrnond Digicom MAP Customers Swissphone Position MASYS Account Position MASYS Password Info IMASYS Account Info IMASYS Password C Locator Account Locator Password Windows User inbound Keyword Modem o Licence Refresh rate Postion as Aged Start Position Latitude Start Position Longitude Start Position Zoom Language Character set
6. 7 1 2 3 BackChannelBigMap cccccceccsseeeceeeeeeeeeeeeseeeeeeeeeaaeeeeeessaaeeeees 28 7 1 2 4 TUNE 28 7 1 3 Position IMASYS Account 29 7 1 4 Position IMASYS Password 29 7 1 5 Info IMASYS Account 29 LLO IMOIMASYS PassW ld nn ana 29 FA TR LOCO ACCOUN ee EE 29 F EEE el Pa 5 WONG ERE EEE een 29 7 1 9 Windows user 29 7 1 10 Inbound Keyword Modem rrrnrrnnnnnnrvnrnnnnnnvnnrnnnnnnrnnrnnnnnsennnnnnnnsennnnnnnnsennnnnnsnssnn 29 L E ICONS EE ee ee a ER 29 7 1 12 FN 30 7 1 13 Position as age 30 7 1 14 Start Position Latitude Longitude Zoom 30 7 1 14 1 Large map window 5km grid Start Position Zoom 10 30 7 1 14 2 Large map window ikm grid Start Position Zoom 13 30 F Wat un Let Le SEE EE 30 GE NTN 30 Tr N e EE 31 71 18 FRON ee 31 DN NN 31 FG Rn Lee 31 TVEN 32 TET VENNE Lee 32 Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 5 of 49 fen S SWISSPHONE Tea ANN 32 723 NNN 32 7 2 4 Department 32 FR VE TE 33 125 PASS WONG een EN EN 33 7 2 7 Message Sender Name 33 TER LOU 0 EE ES 33 7 29 MN Lea 33 7 2 9 1 Ped 33 7 2 9 2 MN 33 7 2 9 3 POSEN 34 AE EEE ne enact E 34 TE EE 34 72 102 BOKN erten 34 7 2 11 Information Intervals ccccecccceececceeeecseeeeceeeeeceueeeseueeeseueessucessaeeessaeeesageeesaaees 34 7 2 12 Send Strength Message cccccccssesseccceeeeeeseeeeeecceeeeeeeeeseeeeeeeeessueeaeeeeeeeessaeaaee
7. 7 5 4 Status The status provides information on the current status of the device 7 5 4 1 Active The device is active and is being used 7 5 4 2 Inactive The device is inactive and is not being used at the moment This function can be used for example ifthe RES Q is not currently being used as it is not assigned to a force ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 36 of 49 VU SWISSPHONE 7 5 5 Various Field for own notes and comments 7 5 6 Foreignld Identifier ID from administration software used parallel to Digicom MAP For information only 7 6 Forces All the forces that carry a RES Q are entered in the forces management section This screen is also used to assign a defined terminal RES Q to the forces local SwissPHone Digicom MAP Fig 23 Manage Forces screen 76 1 Last Name Last name of the force 7 6 2 First Name First name of the force 7 6 3 Mobile Mobile number that a strength message is to be sent to if the force is entered as a man ager in the Group RICs settings see Section 0 The information is sent via SMS In Switzerland the number of the AdC can also be entered as an alternative 7 6 4 Pager No Organisation s internal inventory number of the pager Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 37 of 49 VU SWISSPHONE 7 6 5 Terminal This drop down menu lists all the terminals RES Qs that have been enter
8. GOP NA E 46 Te ANN 46 2 MT 46 2 124 ELE 46 EH ee 47 DoW NN er 47 7 13 1 Network NOESEN ch 47 K KEE One 47 FOE PSN rn 47 FAE WR en 47 7219 NED 47 GN 47 NNN NNN NNN UN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 7 of 49 fen S SWISSPHONE Illustrations Fig 1 General overview of RES Q solution Alarms with confirmation rrrnnnnrnnnrrnnnrnvrnnrnnnnnrrnnnnnn 2 FIG 2 Digicom MAP GUI re 10 Fig 3 Pushbuttons for entering editing deleting entries ne nnnnnnnne nennen 10 FIG 4 Digicom MAP homepage iu nen ea 14 Fig 5 Display of the alarms and confirmations n000nnnnonennnennennnneonennnnnsennnnnsnnnerennnnreresenneressenrnee 15 ge Sa ER oe 9 e h EEE EEE EEE 16 Fig 7 Export fleegt e TE 17 Fig 8 List of alarms Overview uuueesnsensnneennnnnnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnennnnnnnnnnnnnnnnnnnnnnnne sans 18 FIGs SE OOM Ko EE E E EE 19 Fig 10 Alarm display with strength message rrrrnnnrrrrnnnnrvrrnnnrenrnnnrrnrnnnnrnnnnnnrennnnrennnnnnsennnnssennnnsee 20 Fig 11 Alarm display with availability report 21 Fig 12 Excerpt from the master data management menu 22 Fig 13 Recommended Digicom MAP application workflow 23 Fig 14 Alarm display with strength message rrrrnnnnrnnnnnnnnnnnnnrenrnnnnennnnnnrnnnnnnrennnnnrennnnnnsennnnssennnnsee 25 INN 26 Fig 16 Backchannel without map axvaniesainesanecawuedpeediuasinentaysveadhadindsawensnnady sisieanbiesnentvieimanrenc
9. gt Strength Message display is activated bei localhost 220 SWISSPHONE SET Map Satelite Hybrid Time of day roup availability 10 Total S Battalion c ea adder AR Engine Fig 19 Strength view display Digicom MAP User manual Version 1 0 0 for V1 6 1 ON duty OFF dut Page 28 of 49 VU SWISSPHONE 7 1 3 Position IMASYS Account Can only be used if a Position IMASYS account with Swissphone Telecom AG exists Enter the account data With the Position IMASYS account a message sent via the Info IMASYS account see Section 0 can be answered 7 1 4 Position IMASYS Password Can only be used if a Position IMASYS account with Swissphone Telecom AG exists Enter the password for the IMASYS Position account 71 5 Info IMASYS Account Can only be used if an Info IMASYS account with Swissphone Telecom AG exists Enter the account data With the Info IMASYS account strength messages can also be sent to e mail and SMS accounts as well as to radio paging centres 7 1 6 Info IMASYS Password Can only be used if an Info IMASYS account with Swissphone Telecom AG exists Enter the password for the IMASYS Position account 7 1 7 Locator Account Can only be used if a Locator IMASYS account with Swissphone Telecom AG exists Enter the account data With the Locator IMASYS account the receiver can be located via triangulation and the approximate position can be identified 71 8 Locator Passw
10. in reverse order to remove a force from the group 7 10 Acknowledgements The possible acknowledgements from the RES Qs are defined on this screen ee EIR Digicom MAP x d IB Digicom MAP localhost Digicom MAP SWISSPHONE Acknowledgements Index Active ext Symbol 5min lw r CNN Fig 27 Acknowledgements screen ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 43 0f 49 ll OD SWISSPHONE The definition of the possible acknowledgements in Digicom MAP does not affect the possible acknowledgements in the RES Q It is imperative that indexes of the confirmations in Digicom MAP are con gruent with the indexes of the confirmations in the RES Q configuration Otherwise there will be incorrect information in Digicom MAP Index Active Text Symbol Color Text z p Komme lt 5min 0 komme lt 15min Komme gt 15min 1 2 3 fn 4 komme MICHT 5 6 7 1 2 3 4 5 6 7 B 9 Fig 28 Assignment in Digicom MAP um Fig 29 Assignment in the PSW 7 10 1 Index If no entries exist all indexes are 1 However they are changed to the correct values au tomatically when the entries are created 7 10 2 Active Activates the entry 7 10 3 Text Message text that is shown in the Digicom MAP key 7 10 4 Symbol Symbol that characterises the acknowledgement Is shown on the table 7 10 5 Color RGB colour Can either be entered directly o
11. message GE Time of day 10 ee Total SC Battalion SR EE adder 2 nine Firefox gi localhost ee D 3 IPHONE crow availability Fig 11 Alarm display with availability report Availability display bei Bar chart Top bar Overall analysis of the current availability Bottom bar Analysis of availability by function group of the forces Polyvalent forces are displayed multiple times Legend Matches the definition of the replies to the colors defined Click on the Swissphone logo to close this display Ocontigure the size of the bar chart by clicking on the hyperlink A bigger text factor re sults in a smaller bar chart The settings are stored locally by using cookies Therefore the layout of this page can be configured for each screen used separately Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 21 of 49 VU SWISSPHONE 6 Master data management Master data management can be accessed via the Master data menu If the strength message is currently being shown the administration user interface is ac cessed by clicking on the Swissphone logo EM Digicom MAP Digicom MAP Fig 12 Excerpt from the master data management menu Master data management provides functions for data management in connection with the following areas Various different functions are available depending on the user rights Function Super user Administrator Write Read Confirmations a Mas
12. pager RES Q timestamp showing when the answer was sent Rec server Timestamp showing when the confirmation of receipt was received Answ server Timestamp showing when the answer was received Alarm display Timestamp and text of the alarm selected below EN Map Forces displayed with existing position for the alarm selected below Last measured position of the forces with positive answer Last measured position of the forces with negative answer 5 4 Status queries and status messages The groups and the status data are displayed via the Confirmations menu MAP Status tab TESCH Pf Digicom MAP IB Digicom MAP x BM Digicom MAP ks Sw ssenond Digicom MAP Status abfragen Status l schen Fig 6 Status display a List of the registered groups 2 List of the current statuses for the group selected on the left Status Status Time Battery Battery charge status GPS Yes GPS module is installed and is working correctly GPS No No GPS module installed module is switched off or faulty A position exists has been confirmed Pos Time Time when the confirmed position was measured ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 16 of 49 Leien T SWISSPHONE Map Forces displayed with existing position for the group selected on the left Last measured position of the forces position is 0 15 min old it Last measured position of the forces position is 15 min
13. when the confirmation of receipt was received Answ server Timestamp showing when the answer was received Alarm display Timestamp and text of the alarm selected below NO Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 18 0f 49 T SWISSPHONE 5 5 1 Exporting the alarm list 6 52 02 THL Auffahrkolkson A3 KM 123 gt Z rich 18 10 2012 13 13 16 ADL Persanenbergung Meierweg 2 Musterstadt Eimweisung durch FW var Ort 18 10 2012 12 53 52 ADL Personenbergung Meerweg 2 Musterstadt Einweisung durch FW vor Ort 18 10 2012 11 47 44 BRAND Grossbrand Schreinerei Gluchiche S ge S gestrasse 1 Anfahrt ber ROG 18 10 2012 11 27 13 BRAND Grossbrand Schreinerei Gludk che Sage Sagestrasse 1 Anfahrt ber Rud Late loschen Export Alarms Start Date Ke GN MET el Zr EN Ee Ke S Oktober 2012 2 lt Oktober2012 gt Mo Di Mi Do Fr S So Mo Di Mi Do Fr Sa Se 4 2 29 30 24 2 26 2 29 30 23456 12 2234582 8 9 10 11 12 13 14 8 9 10 11 12 13 14 15 16 17 28 19 20 21 15 16 17 18 19 20 21 22 23 24 25 26 27 28 22 23 24 25 26 27 28 2033 13 2 3 alima an 1 2 3 4 Fig 9 Export of alarm list Export operations are executed by pressing Export The alarm list can be exported and saved if required Data is exported in XML format in order that it can be imported easily into other systems The correct data format can be validated by means of an XSD Schema file The XML files can also be imported into MS Excel etc ON Dig
14. 0 2 Blocked A blocked user can no longer log on to the system However his her master data remains in the system This makes it possible to block a user account for a certain period of time for example during an extended holiday 7 2 11 Information Intervals Can only be used if an Info IMASYS account with Swissphone Telecom AG exists Defines the time period in s after which the user is to be informed of the current status of the groups 7 2 12 Send Strength Message Ticking the checkbox activates sending the strength message 7 3 Additional users Users that have already been entered can be assigned an additional client This function can be used when operation Digicom MAP in Command and Control Cen ter The CCC can add the monitored organisations by using the feature additional users Thus showing all responses from the different organisations on its own screen ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 34 of 49 VU SWISSPHONE 7 4 Configuration Basic Digicom MAP display characteristics are configured FEIER M Digicom MAP x Pf Digicom MAP in Digicom MAP A un Enssrmoni Digicom MAP Configuration Time span for message mapping Message mapping fault tolerance Message mapping character count Integrate device fix text Integrate device fix text in message mapping Time span for strenght analysis display Language Semices EI EI ET Fig 21 Configuration screen 7 4 1
15. 1 0 0 for V1 6 1 Page 17 of 49 i SWISSPHONE 5 5 Alarm messages P Digicom MAP bei localhost Sunssrnoni Digicom MAP DemoBuPs 18 10 2012 11 47 44 18 10 2012 13 13 16 BRAND Grossbrand Traffic Collision w Entrapment 4420 E Rodeo Rd Single vehicle rollov dr Map E Dagram iR Custom Uhrzeit 09 57 Time of alarm 11 47 SEN 1 Pl ro SEE 1 or E 1 e TTT es EN ms O r o lt 15min j Di ih Gf Aarme stans Zeitstempel Meldungstext N i Empf Pager 18 10 2012 16 52 02 THL Auffshrkolision A3 KM 123 gt Z rich Kalt 11 47 08 AM 18 10 2012 13 13 16 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW var Ort Stv 11 47 06 AM 18 10 2012 12 53 52 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW vor Ort e 0 11 47 06 AM 18 10 2012 11 27 13 BRAND Grossbrand Schreinerei Gl ckliche Sage S gestrasse 1 Anfahrt ber Rod Kpl2 11 47 07 AM 11 47 07 AM 11 47 07 AM Fig 8 List of alarms overview A list of previous alarms including technical and tactical responses can be found via the Confirmations menu Diagram tab 1 List of the registered alarms 2 List of the confirmations for the alarm selected on the left v Positive answer x Negative answer A position exists has been confirmed Rec pager RES Q timestamp showing when the alarm was received Answ pager RES Q timestamp showing when the answer was sent Rec server Timestamp showing
16. AP can determine deployment on the basis of these texts A target strength can then be defined for the incident If a target staffing of O is filed for a function the status of the confirmation is not updated on the strength message display and the status of the bar remains Unknown status grey However the total number of confirma tions is still correct If fixed alarm keywords are not used a space can be entered Disadvantage The message can then not be seen in the selection box on the left Several groups can nevertheless be defined and saved The groups selection also still works correctly 7 12 4 Timeout The timeout defines how long the alarm message and the confirmations are shown on the display for The time is specified in seconds For example if an alarm is to be shown on the display for 15 minutes the timeout must be set to 60s 15 900 The unit s must not be entered ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 46 of 49 effi SWISSPHONE 7 12 5 Functions The target strengths are defined by assigning the functions to the relevant alarm text Once a possible function has been selected it is activated using the lt lt pushbutton A new field Strength appears The target staffing of the selected function is to be defined here If a target staffing of 0 is filed for a function the status of the confirmation is not updated on the strength message display and the status of the bar re
17. Time span for message mapping Tactical responses with the same alarm text that are received within this time span in s are assigned to the same incident 7 4 2 Time span for strength analysis display Time span in s that the alarm message is shown on the alarm display for After this time span has elapsed the theoretical availability of the forces technical re sponse is shown on the alarm display 7 43 Language Determines the language of the titles on the alarm display e English e French e Italian e German e Danish ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 35 of 49 VU SWISSPHONE 7 5 Terminals The RES Qs used are entered in the terminal management section Fields with an aster isk are mandatory be local SWISSPHONE Confirmations Master data Description Logout Phone No State Various Fig 22 Manage Terminals screen 7 5 1 Description Each device can be given its own name For example this could be the organisation s own inventory number The device description is used when the terminal is assigned to a force 7 5 2 Phone No Telephone number of the SIM card in the RES Q The field is for information purposes only and does not affect the function of the pager or Digicom MAP 7 5 3 Serial Number The serial number of the RES Q is entered in this field The serial number is located un der the cover of the battery compartment labelled S N
18. Various Foresgnid Fig 15 Customers screen 7 1 1 Company The name of the client Is required for the Company input box when logging on Four service options are available that affect the appearance of the Confirmations input screen 7 1 2 Service Defines the startup screen after login TN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 26 of 49 Lett T SWISSPHONE 7 1 2 1 BackChannelNoMap The MAP Alarms tab is active A map is not displayed x bei D localhost Dog M t eckka a 2 6 Ensernosal Digicom MAP A map Zi nagram BS Custom Name Status Zeitstempel Meldungstext 18 10 2012 16 52 02 THL Auffahrkolision A3 KM 123 gt Z rich 18 10 2012 13 13 16 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW vor Ort 18 10 2012 12 53 52 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW var Ort 18 10 2012 11 47 44 BRAND Grossbrand Schreinerei Gl ckliche S ge S gestrasse 1 Anfahrt ber Rod 18 10 2012 11 27 13 BRAND Grossbrand Schreinerei Gl ckliche S ge S gestrasse 1 Anfahrt ber Buch Fig 16 Backchannel without map 7 1 2 2 BackChannelSmallMap The MAP Alarms tab is active A small section of the map is displayed PM Digicom MAP x Ef Digicom MAP E Digicom MAP x localhost Dy bGuiRueckk SWISSPHONE Digicom MAP ay var Ei vagan amon gag E as VE Si Alarme Status Zeitstempel Mekku
19. a the Users screen e Export functions on the basis of XML XSD of master data alarm list and actual profiles KE PE Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 3 0f 49 fen S SWISSPHONE Contents Tigi ge GUCTION EEE ee ee ee ee 2 Changes in comparison with Digicom MAP 1 4 vereion 3 E FFO 9 1 1 Names of elements rarrrnnnnrrnnnnnnnnnnrrnnnnrnnannrrnnnnrnnanrennnnrnnnnnrnnnnrnnannennansennansennansnnnnsnnnnnene 9 VNR en ae een E 9 Er MON 9 2 Fed nd Dutton un Si ssco cee edee seen deo enn EEEE 10 10 Be TE e DA e 10 NN 10 22 10 737245 EN 11 224 Ne 11 e EE 11 3 Technical requirements 0080 nnnn nenn nenn nenn nenn nenn nen anne nnnn anne nnnn nennen nenne 12 AN 12 3 2 Operating the station GiSPlAY 2 ceeccccccceccceeeseeeeeeeeeeeseeeeeeeeeeseeeeseeeeeeeeeesaeaaeeeeeeeeessaas 12 3 2 1 Minimum hardware required cccccsssccccssseecccesececeeuseeecseseeesseseeessenseesssaseeeess 12 3 2 2 Minimum software required rrrnnnnnnrevnnnnnrvnnnnnrenrnnnrennnnnnrnnnnnnrennnnnrennnnnnsnnnnnnnen 12 4 Installing Digicom MAD 13 4 1 Browser security Settings ccccccssscecceescecceeeeeeceeuseecceuseeessauseessauseeeseaseeessageeesseneeesseaes 13 E e JAVA et e E we en 13 4 1 2 Information on security messages when loading the map view 13 5 Using Digicom MAP ar arena 14 5 1 Opening the web interface 000nnnnn0ennnnnnennnnnorennnnnsrnrnreonrnrrrnsrnrerensnnrrrosrnrnrrsnnnreennnnenen 14
20. ces entered are shown in the field on the right To add them to a group the relevant forces must be selected in the Non Members section and copied into the Members group using the lt lt button Forces can be members of several groups Proceed in reverse order to remove a force from the group If the force is to receive strength messages it must be entered as a manager see Section 0 7 1 8 Entering managers Forces usually managers can have strength messages sent to their mobile phone in Switzerland to their pager as well via AdC If these forces are also to appear in the strength message bar chart they must be en tered as members and as managers Forces that are to be informed but are not to be part of the strength message are only to be entered as managers Confirmation is only given via the pager if the person assigned under Manag er has previously been assigned a valid Mobile number on the Manage forces screen see Section 7 6 2 KE FN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 40 of 49 VU SWISSPHONE 7 7 9 Link Edit Group Device Accesses the settings for pager user status queries This function only works within Swit zerland on the Telepage network Digicom MAP Terminal Type RES OT OAP stat Character E OAP Password men Senal Number Use outside of the Telepage network CH This setting has no influence on the function of your terminals or Digicom MAP Digita
21. de pendent on the forces being members of defined groups The functions defined here are subsequently shown on the alarm display in connection with the strength message Usually the training qualifications and any ranks are entered as functions with fire ser vices EM Digicom MAP Digicom MAP Functions Fig 26 Functions screen 7 9 1 Function Defines the required function ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 42 of 49 VU SWISSPHONE 7 9 2 Priority Determines the priority of the function If a user has several functions Digicom MAP at tempts to assign this user the function with the highest priority that the target staffing has not yet been achieved for 1 is the highest priority If no possible alarms are defined see Section 7 12 the functions are not prioritised as there is no target staffing information Without prioritisation the strength message shows the sum of the available forces in the overall analysis However the analysis of the function groups shows all possible staffings which can result in forces being named several times 7 9 3 Entering members Defines the members of the relevant groups All the forces entered are shown in the field on the right To add them to a group the relevant forces must be selected in the Non Members section and copied into the Members group using the lt lt button Forces can be members of several groups Proceed
22. der of the information A maximum of 11 characters long alohanumeric values are also permitted Alphanumeric values are not transferred via the landline network in this case purely numerical values are to be used 7 2 8 Language Determines the GUI language 7 2 9 Rights Defines the rights of the newly created user 7 2 9 1 Read A user with read access can open all confirmation displays e Alarms e Status e Alarm display with strength message e Logout 7 2 9 2 Write A user with write access can carry out the following activities in addition to the read ac cess activities e Delete the alarm list e Trigger status queries can only be used in Switzerland with the Digicom MAP service from Swissphone e Delete the status list Furthermore users with write access can also create edit and delete the following entries via master data management e Forces e Group RICs e RICs e Functions e Possible Alarms e Networks e Group Structure ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 33 0f 49 EE VU SWISSPHONE 7 2 9 3 Administrator In addition to Write access activities the administrator can also create edit and delete the following entries via master data management e Users e Configuration e Terminals e Acknowledgements e Device profile e Import Core Data 7 2 10 Status Defines the user s status 7 2 10 1 Active An active user can use the system in line with his her user rights 7 2 1
23. ed but have not yet been assigned to a force Select a device from this list to assign it to the force 7 6 6 Link Go to terminal Goes directly to the Terminals input screen The terminal that is assigned to the currently selected force is displayed 7 6 7 Status The status provides information on the current status of the force 7 6 7 1 Active The force is actively assigned within the organisation 7 6 7 2 Inactive The force is currently not active within the organisation This function can be used for example if the force is currently on holiday 7 6 8 Various Field for notes and comments 7 6 9 Foreignld Identifier ID from administration software used parallel to Digicom MAP For information only ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 38 of 49 VU SWISSPHONE 7 7 Group RIC The organisation s alarm groups are entered on this screen With fire services they are usually alarm or emergency response groups with rescue services they are often vehicle crews and with the police they could be groups of officers with special skills e g dog handlers Functions that are can be carried out by individual persons are to be entered under Functions E Digicom MAP Digicom MAP Fig 24 Group RICs screen 7 7 1 Group Name The group name shows which group is to be sent an alarm with the parameters defined below 7 72 RICs Enter the RIC Radio Ident
24. erating the station display 3 2 1 Minimum hardware required Computer with network access to the Digicom MAP server and monitor output Large display with appropriate monitor input e g VGA DVI HDMI 3 2 2 Minimum software required Network compatible and internet compatible operating system with web browser The web browser must support XHTML 1 1 and JavaScript ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 12 of 49 VU SWISSPHONE 4 Installing Digicom MAP Digicom MAP is a server based programme This means that only a browser has to be installed on the working computer Every other access to Digicom MAP is made via the browser 4 1 Browser security settings 4 1 1 JavaScript The browser must support JavaScript and have activated it In some circumstances Mi crosoft calls this function Active Scripting To activate JavaScript please refer to the help function of the browser concerned and any support forums operated by the manufacturer of the browser 4 1 2 Information on security messages when loading the map view When logging on to Digicom MAP a security message may appear while the map is load ing This message points out that contents of the website are not transmitted via a secure HTTPS connection The user must respond to the message enabling all website con tents to be loaded The warning about website contents that are not transferred via an HTTPS connection comes from the map view Google Ma
25. exists error message 6 1 2 2 Managing forces device users Last name first name are needed for assignment to groups must be unique Terminal RES Q device numbers that have been created in Section 6 1 2 but have not yet been assigned are displayed here Select the related number and set the status If a force is also to receive strength messages on a terminal pager or mobile phone the AdC number or the mobile number also has to be entered Other fields such as Pager Various and Foreignld are not relevant 6 1 2 3 Creating functions The functions produce the sub bars in the strength message The text and the priority must be entered Assign the individual functions to the forces One force can perform several functions 6 1 2 4 Group RICs assigning the RICs and forces to the groups Setting up groups Enter the group name RIC 7 digit and sub address capitals Other fields such as AdC Pattern and Foreignld have no function Composing groups Click on a group click relevant members on the Non Members table and assign them to the Members table using the lt lt button Managers are also to be assigned from the Non Members table The managers receive strength messages via the mobile phone number entered under Manage forces 6 1 2 5 Other functions The other functions are described in the Reference manual section from page 25 ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 24 of 49 Lef SWISSPHONE T
26. icom MAP User manual Version 1 0 0 for V1 6 1 Page 19 of 49 SWISSPHONE 5 6 Strength message availability report Press Strength analysis on the Confirmations menu Custom tab to access the alarm dis play with strength message 5 6 1 Strength message Inthe event of an alarm the strength message for the defined period is shown see Sec tion 7 4 1 Alarmdisplay with strength message 1 Time of day 14 34 Time of alarm 14 34 7 tt ME Tora SEE 1 crier SECH 1 ve EE smoke Diver ER St gt EE I ees Fig 10 Alarm display with strength message Alarm display Timestamp and text of the alarm selected below LG Bar chart Top bar Overall analysis of the current alarm Bottom bar Analysis of the current alarm by function group of the forces Polyva lent forces are displayed multiple times Legend Matches the definition of the replies to the colors defined Click on the Swissphone logo to close this display EN Configure the size of the bar chart by clicking on the hyperlink A bigger text factor re sults in a smaller bar chart The settings are stored locally by using cookies Therefore the layout of this page can be configured for each screen used separately Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 20 of 49 VU SWISSPHONE 5 6 2 Availability report If no alarms are pending the station display shows the current availability of the forces Alarmdisplay with strength
27. ification Code of the group involved The RIC entered must have 7 digits If an RIC has less than 7 digits Oe zeros must be added as required For example if the RIC 6000 is to be assigned the value 0006000 must be entered into the field Otherwise the strength message display will not work 7 7 3 Sub Address Enter the sub address belonging to the RIC value A D 7 7 4 AdC The address code also known as paging number has 10 digits The first three digits identify the paging system and the last seven digits represent the paging number that identifies the subscriber The transmitted data is converted into a POCSAG message and sent by the radio paging centre Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 39 of 49 VU SWISSPHONE The AdC of the group in question is available from your network provider 7 7 5 Pattern The confirmation can be customised The following wildcards are used 1 Responding 2 Total number of forces the alarm was sent to 3 Alarm message For example if a simple strength message is to be sent the entry will be as follows 1 of 2 are responding If the alarm text is also to be sent to ensure clear assignment the entry will be as follows 1 of 2 are responding to 3 7 7 6 Foreignld Identifier ID from administration software used parallel to Digicom MAP For information only 7 7 7 Entering members The members of the relevant groups are defined All the for
28. is of the confirmations displayed as a bar chart e Status messages analysis of the active status profiles displayed as a bar chart e Option Alarm calls received directly from the POCSAG network and displayed immediately via an additional module Use in fire stations The strength message with confirmations displayed as a bar chart is specially designed for use in fire stations The information is shown on a large display as a preference A purely web based so lution and stand alone solutions are available Forwarding connection to the control centre is dis pensed with This simplifies the system structure as no action is needed from the dispatch system NNN NNN NNN JUL Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 2 of 49 VU SWISSPHONE Changes in comparison with Digicom MAP 1 4 version e Bar chart display under Confirmations Diagram for statistical analysis works in the same way as the alarms display e If there are no alarms availability display pager profiles on the station display via the Device profile screen Up to 8 profiles can be defined e Display and analysis of up to 8 individual acknowledgements via the Acknowledgements screen e Time span of the alarm summary can be configured via the Configuration screen e Time span of the alarm display can be configured via the Configuration screen e POCSAG font can be set via the Customer screen e The Digicom MAP language can be customised on a user specific basis vi
29. l alerting still works correctly 7 8 RICs The personal RICs Radio Identification Codes are managed on this screen If individual persons receive alarms via their personal RIC the alarm message is shown on the station display However strength messages are not shown If strength messages are also to be received with individual alarms the per son in the group RIC must represent a group with only one member 7 8 1 RICs Enter the personal RIC Radio Identification Code of the force involved The RIC entered must have 7 digits If an RIC has less than 7 digits Us zeros must be added as required For example if the RIC 6000 is to be assigned the value 0006000 must be entered into the field Otherwise the strength message display will not work Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 41 of 49 VU SWISSPHONE 7 8 2 Sub Address Enter the sub address belonging to the RIC value A D 7 8 3 Entering members The member force of the relevant RIC is defined All the forces entered are shown in the field on the right To assign the individual RIC to the force the relevant force must be se lected in the Non Members section and copied into the Members group using the lt lt but ton Forces can have several individual RICs assigned to them Proceed in reverse order to remove a force from the group 7 9 Functions Functions can be assigned to the forces in the organisation These functions are not
30. mains Unknown status grey However the total number of confirma tions is still correct 7 13 Networks If several redundant alarm networks are operated this screen can be used to assign the IDs to the networks The Map Alarms tab shows which network the alarm was sent in This function is not used in Germany at the present time 7 13 1 Network Name Defines the name of the network 7 13 2 Number Defines the ID of the network 7 14 Group Structure The group structure shows all the forces entered the RICs assigned to them and the as signed functions in a simple table 7 14 1 Export Allthe data relevant to the current customer is exported in an XML file This data togeth er with the related XSD Schema file can be imported into MS Excel 2010 and edited The data can therefore be imported into other tools or checked during evening duty ses SIONS 7 15 Import Core Data Provides an import interface for CSV Files with the following definition Datenimport IMASYS Map Digicom MAP Version 1 0 0 Serienummer Geraetetyp Bezeichnung GSM Rufnummer OAP Rufnummer System 7 16 Search Search screen for targeted searches for e Serial number e GSM number e Force number ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 47 of 49 Vg SWISSPHONE Notes Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 48 of 49 EEE RE OD p SWISSPHONE We reserve the right to change the content of this docume
31. n Google Maps with the web browser 2 Enter the required location 3 Select the location using the right hand mouse button What s here 4 Read off the coordinates from the input field accurate to four decimal points The additions are calculated for full HD resolution 16 9 7 1 14 1 Large map window 5km grid Start Position Zoom 10 Addition to latitude 0 23 Addition to longitude 1 1 7 1 14 2 Large map window 1km grid Start Position Zoom 13 Addition to latitude 0 025 Addition to longitude 0 130 7 1 15 Language Determines the Digicom MAP language The following languages are available e English e French e Italian e German e Danish 7 1 16 Character set Determines the POCSAG character set used e FTZ Germany e Sprintel e US ASCII e Norway Denmark e Switzerland ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 30 of 49 EEE Ru OD p SWISSPHONE e Sweden Finland e Spain e France e Britain e International e Italy e Japan e Latinamerica e Ermes e SWION France e Slovenia 7 1 17 Various Field for own notes and comments 7 1 18 Foreignld Identifier ID from administration software used parallel to Digicom MAP For information only 7 1 19 Logo Any logo can be loaded instead of the standard RES Q logo The graphic should be narrower than 200 pixels 100 x 150 pixels is recommended 7 1 20 Symbols User s own symbols can be added to the symbols available on the Ack
32. ngstext 18 10 2012 16 52 02 THL Auffahrkolision A3 KM 123 gt Z rich 18 10 2012 13 13 16 ADL Personenbergung M erweg 2 Musterstadt Ermeeisung durch FW vor Ort 18 10 2012 12 53 52 ADL Persanenbergung Meerweg 2 Musterstadt Einweisung durch PW vor Ort 18 10 2012 11 47 44 BRAND Grossbrand Schreinerei Gl ckliche S ge Sagestrasse 1 Anfahrt ber ROJ 18 10 2012 11 27 13 BRAND Grossbrand Schreinerei Gl ckliche Sage S gestrasse 1 Anfahrt ber Bu Copyright 2000 2011 by Swissphone Telecom Fig 17 Backchannel with small map Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 27 0f 49 7 1 2 3 BackChannelBigMap SWISSPHONE The MAP Alarms tab is active large section of the map is displayed Rdigcomm E Digicom MAP F Digicam MAP D localhost Digi MapWe mg 4 EL k DI end G k Maninger j Finstersee af Aarme Status Zetstemoe Mekdungstext 18 10 2012 16 52 02 THL Auffahrkalision A3 KM 123 gt Z rich 18 10 2012 13 13 16 18 10 2012 12 53 52 18 10 2012 11 47 44 18 10 2042 11 27 13 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW vor Ort ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW vor Ort BRAND Grossbrand Schreinerei Giudice Sage Sagestrasse 1 Anfahrt ber Rud BRAND Grossbrand Schreinerei Gl ckliche Sage S gestrasse 1 Anfahrt ber Rud Fig 18 Backchannel with big map 7 1 2 4 StrengthView The Custom
33. nowledgements Screen The symbols also appear on the map if GPS is activated on the terminal The graphic must be in gif format and comprise 32x32 pixel symbols White areas are re placed by the status colour and transparent areas remain transparent TN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 31 of 49 Leien T SWISSPHONE 1 2 Users The user can create access to Digicom MAP for additional users Fields with an asterisk are mandatory EM Digicom Map x P Digicom MAP localhost Swresrnosal Digicom MAP Last Name First Name Function Department User Name me MEET Password Message Sender Name hone Language Engish Rights Aae Information Intervals Send Strength Message Fig 20 Customer screen 7 2 1 Last Name Last name of the new user 7 2 2 First Name First name of the new user 7 2 3 Function Function held by the new user within your organisation 7 2 4 Department Department within your organisation that the new user works for ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 32 0f 49 VU SWISSPHONE 7 25 User Name New user s user name The user logs on with the user name on the log on screen Mandatory 7 2 6 Password Password that the client must enter in order to log on 7 2 7 Message Sender Name Can only be used if an Info IMASYS account with Swissphone Telecom AG exists Defines the SMS originator sen
34. nt in its entirety or parts thereof without prior notice This document does not include product specifications and only provides brief descrip tions of the issues addressed All rights reserved All the images and technical drawings shown in this document are the property of SWISSPHONE Telecom AG and may only be used with our con sent Company and product names mentioned in this document may be protected by trademark brand or patent laws SWISSPHONE Telecom AG F lmisstrasse 21 CH 8833 Samstagern Telephone 41 44 786 7770 Fax 41 44 786 7771 E mail info swissphone com Web www swissphone com TN Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 49 of 49
35. ord Can only be used if an Info IMASYS account with Swissphone Telecom AG exists Enter the password for the IMASYS Position account 7 1 9 Windows user For information only 7 1 10 Inbound Keyword Modem Can only be used if an IMASYS account with Swissphone Telecom AG exists The data received on IMASYS is assigned to the organisation on the basis of this key word 7 1 11 License The number of licenses has a direct effect on the number of possible users within the or ganisation ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 29 of 49 VU SWISSPHONE 7 1 12 Refresh Rate The refresh rate specifies the number of seconds after which the station display is re freshed A very fast refresh rate places a very high load on the connected PC 7 1 13 Position as aged If position reporting is switched on the reported position is deemed up to date within the set time 7 1 14 Start Position Latitude Longitude Zoom Defines the coordinates of the start location to be shown on the map usually the custom er s locality The zoom determines the map resolution The coordinates are entered with decimals The coordinates entered are shown in the top left hand corner of the map section If the start position is to be shown approximately in the middle the empirical values in the subsection below should be used The following procedure is recommended in order to identify the coordinates of the required location 1 Ope
36. ps However the account and master data cannot be read in plain text at any time as this data is not sent to Google Maps ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 13 of 49 EEE li OD p SWISSPHONE D Using Digicom MAP 5 1 Opening the web interface Using the browser access the Digicom MAP internet address of the service provider or of the local system 5 1 1 Hosting with Swissphone Telecom AG https digicom map demo swissphone com DigicomMapWebGui 5 1 2 Hosting with a different system provider Please ask the system provider for the correct URL URL 5 1 3 Hosting as an autonomous solution in the fire station The default setting for an autonomous solution in the fire station is http ocalhost DigicomMapWebGui Your system administrator may have specified a different address URL 9 2 Logging on The Username the Password and the Company must be entered in order to log on The operation is then completed by pressing Login These values are available from your system provider or administrator e el Digicom MAP ma Digicom MAP a localhost ser Digicom MAP e SWISSPHONE Digicom MAP Portal Fig 4 Digicom MAP homepage ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 14 of 49 VU SWISSPHONE 5 2 1 Login data administrator User Password Company 5 2 2 Login data write access User Password Company 5 2 3 Login data read access Use
37. r Password Company 5 3 Alarms with confirmation The data related to the alarms and confirmations is displayed via the Confirmations menu MAP Alarms tab selene PR Digicom map PM Digicom MAP LE MAP x j a Ex Ka localhost 3 Pt Br SWISSPHONE Digicom MAP 18 10 2012 13 13 16 Wildfire City Park R ckmeldungen MAP Ez Diagram f Custom Stammdaten mg 3 Map Satente Mond IC Logout m nt Foenn Ve Mn a gt Finaste pa Be Wo Google Map da Googie Er ZS d Alarme Gp Status Zeitstempel Mekdungstext Benutzer Netz Antwart Pos Empf Pager Antw 18 10 2012 16 52 02 TH Auffahrkolision A3 KM 123 gt Z rich 18 10 2012 13 13 16 ADL Personenbergung Meierweg 2 Musterstadt Einweisung durch FW vor Ort 18 10 2012 12 53 52 ADL Personenbergung Meerweg 2 Musterstadt Einweisung durch FW vor Ort 18 10 2012 11 47 44 BRAND Grossbrand Schreinerei Gluckliche Sage Sagestrasse 1 Ar wd 18 10 2042 11 27 13 BRAND Grossbrand Schreinerei Gl ckliche S ge S gestrasse 1 o d 3 Liste l schen Fig 5 Display of the alarms and confirmations o List of the registered alarms List of the confirmations for the alarm selected on the left v Positive answer x Negative answer A position exists has been confirmed Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 15 of 49 EEE RE OD p SWISSPHONE Rec pager RES Q timestamp showing when the alarm was received Answ
38. r defined using a colour palette 7 10 6 Unavailable Answers that have ticked this checkbox are rated not available with prioritisation of the functions under Possible Alarms see 7 12 ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 44 of 49 VU SWISSPHONE 7 11 Device profile The possible profiles of the RES Qs are defined on this screen The strength message is displaying the theoretical available forces at the very moment The information regarding the availability is obtained from the active pager profile 7 11 1 Deactivate strength analysis display By enabling this option the strength display will be deactivated on the custom screen While not showing any alert messages the display shows a white background 7 11 2 ID The ID defines the sequence of the profile list The ID used in Digicom MAP has to be the same ID as used in the PSW Plus 711 3 Text Defines the text in the legend on the custom screen This text must match the text used in the PSW Plus exactly 7 11 4 Color Color value in RGB The value can be entered directly or it can be defined by using the color palette The definition of the possible profiles in Digicom MAP does not affect the possible profiles in the RES Q It is imperative that indexes of the profiles in Digicom MAP are congruent with the indexes of the profiles in the RES Q configuration Otherwise there will be incorrect information in Digicom MAP Farbe 0 Verf gba
39. r wOOFFOO IS 1 Verf gbar gt 1h FFB300 2 B sse zz 8 3 Pikett Dienst 0000FF 5 m 6 Jie 10 7 hie G Fig 30 Assignment in Digicom MAP Verf gbar Name Profil Typ Aktiviert Verf gbar Wahl Profil af a Verf gbar 1h Wahl Profil d Abwesend Wahl Profil ee Lise Hirbon OLE KICKER Fig 31 Assignment in the PSW TT NO Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 45 of 49 VU SWISSPHONE 7 12 Possible Alarms Defining possible alarms makes it possible to specify target staffing for the alarm in ques tion Forces that send a positive response in the event of an alarm are assigned in accordance with their possible function Digicom MAP automatically attempts to staff the functions with the highest priority first If the target staffing of a function has been achieved the re sources are assigned to priority no 2 Therefore Digicom MAP can be used at any time to find out whether resources sufficient for dealing with the incident are at the scene One can also see whether these resources have the relevant qualifications needed to deal with the incident This function can also be used to set the way the alarm is shown on the display 7 12 1 Group Name The groups defined on the Group RICs screen are selected 7 12 2 RICs Shows the RICs used in the selected group 7 12 3 Alarm Text If the same keywords are always used in alarms e g small fire large fire or TH1 TH2 etc Digicom M
40. ss 34 73 AMONA SES EE 34 NN 35 7 4 1 Time span for message mapping nennen nnennnn nennen enennnnn 35 7 4 2 Time span for strength analysis display nennen 35 AEE LEST Te EEE EE EEE RE 35 Lo ene 36 TE DESEHDUON EEE EEE EEE 36 792 POE e EE 36 ToS Sena ll e RE EE EEE 36 VO E e ee een nee re ee En ee ee ne 36 7 5 4 1 EE 36 7 5 4 2 UC US EEE 36 PoS N e EE 37 256 FOGOD ME 37 F SE Geier 37 7 0 4 IESSE OE EE EEE ENER 37 P Reg in 37 7 0 3 ME 37 164 A ACCU e EE 37 70 TN see ee 38 7 6 6 Link TM 38 DTU 38 7 6 7 1 PCAN EE 38 7 6 7 2 MN E 38 AKER e E 38 7 6 9 Foreignld EEN 38 FS ISO Die all EEE NE ee ar ee ee Fee nen 39 7 1 1 Group NaMe EE 39 EEE OE 39 KN PE Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 6 of 49 fen S SWISSPHONE Z273 MN 39 TT 39 FE 40 TO FONN amateure 40 OT 19 E 40 Tals ME ut enn En e 40 7 1 9 Link Edit Group Device nenne ee een 41 Lo Ce 41 1 AE 41 EE Die E ae 42 L93 leen 42 ER ee EEE EEE ee Degen 42 P D FUNCIO E 42 ae OMU E 43 793 Entering member een 43 7 10 Acknowledgements ccceccccccseeeeceeeceeesececccueeseeeeeceassceeeeseeseceessseaeeeesseaaeeeeesssageeeeseeas 43 FAOT TAE E 44 PAO PCN EEE E 44 TEN 44 TT SN 44 TAO CoO eebe 44 FS VEME 44 Till DEN Nene 45 7 11 1 Deactivate strength analysis display rrrrennnnnrrvvvrrnnnrrrrnnrnnnvrvennrnnnerrrnnnnnnereeen 45 ES KEN RE 45 Dell dE 45 ELT E e 45 7 12 PENE All near re ee 46 7 12
41. ter data Logout eo Customers Users Additional users Configuration Terminals Forces Group RICs RICs Functions Acknowledgements Device profile Possible Alarms Networks Group Structure Import Core Data Search ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 22 of 49 WT T SWISSPHONE 6 1 Digicom MAP management quick reference guide Detailed descriptions of the individual screens and input fields can be found in the Reference man ual section from page 25 6 1 1 Recommended application workflow Define possible alarms I Customer data Log on with admin rights Create groups or write access Define prioritise func tions Customer data Enter customer data Enter terminals Define possible alarms Enter forces assign terminals End Enter forces assign terminals Mandatory Optional Fig 13 Recommended Digicom MAP application workflow ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 23 of 49 VU SWISSPHONE 6 1 2 Preparing personal details and alarm data The following sections are workflow dependent and therefore have to be processed in the specified order 6 1 2 1 Managing terminals RES Q pagers Fill in edit the description serial number and status If the GSM number Phone No is also to be entered it must be assigned a number that is unique in the database otherwise the data record is not saved Number already
42. ueninnesivcann 27 FIG 17 Backchahnel wih smal MAD ONE 27 Fig 18 Backchannel with big map 28 FIG 19 Strength view display Luse eee nee ieni 28 FIG 20 CUSLOMEr STEEN surrande rinnen enaA EEEE NE EEAS EEEE NEE 32 Fig 212 010 11101910 1110 9 SCICON EE 35 FG 225 Manade J MINAS STE ME 36 Fig 23 Manage Forces screen ccccccccseeceecaeeeeecseeeeecaeueeeeseeeeeeeaeeeeseaueeessadeeesaageeeessaeeeesseneessaaneees 37 Fig 24 Group RICs screen ccccccssssccccccsseececccauseececceeuseeeecseauseeeecseauseeeeessauseceeessaaseeeessaageeeessaaagss 39 Fig 25 Manage Terminals screen 41 Fig 26 Functions screen ME 42 Fig 27 Acknowledgements screen 43 Fig 29 Assignment in the PSN ET 44 Fig 28 Assignment in Digicom MAD 44 FIG 30 Assignment in Digicom MAP EN 45 FOs Asslonmient In ING EN 45 EEE Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 8 of 49 egen SWISSPHONE 1 General conventions 1 1 Names of elements Names of elements of the software are written in cursive in this manual 1 2 Warnings Actions which could result in damage to the software or hardware or that have an effect on the correct function of the software are marked with a danger symbol and a red frame 1 3 Information Information and special tips are marked with an information symbol and a blue frame ON Digicom MAP User manual Version 1 0 0 for V1 6 1 Page 9 of 49 Lef T SWISSPHONE 2 Field and button names
Download Pdf Manuals
Related Search