User Manual
Contents
1. Product Parameter Laser Source Led Source Laser Power Power Supply Adapter Rating Power Work Environment Warm up time Work Mode Control Mode Laser Safety Dimension Gross Weight DPSS Green Laser Red Laser Diode 3W Blue 80mMW 532nm adjustable 150 mW 660nm AC100V 240V 50Hz 60Hz DC 12V 1 5A 7W 10 40C Indoor 5 10 minutes sound activated automatic play Manual Remote Class IIIb 220mm x150mm x80mm 0 8kg EF a2AA W Warning Read instructions before installation Mini Laser LED User Manual 2 INTRODUCTION Product Overview LED Output Mode Button LED Indicator Laser Output Microphone Wireless Remote Green Laser Cooling Fan Dimmer Affected by environmental temperature control fan to 12 V Power In run or stop automatically SETUP AC Power This fixture includes an external power supply which is auto ranging and runs on 100 240 VAC 50 60 Hz power Only use the included power supply To obtain a replacement power supply contact us To determine the power requirements for a particular fixture see the label affixed to the back plate of the fixture or refer to the fixture s specifications chart A fixture s listed current rating indicates its average current draw under normal conditions Always connect the fixture to a switched circuit Never connect the fixture toa A rheostat variable resistor or dimmer circuit even if the rheostat or di2. IR Select to the Sound active work mode Select to the Autorun or the Autorun and Sound active auto switching work mode Turn the laser and led on off Select the l Select the laser color in forward order laser color in reverse order Turn the led on off or au LASER Turn the led on off or select the led color in forward order in reverse order O Reduce the sensitivity MIC Increase the sensitivit of the microphone 3 SENSITIVITY 6 of the microphone Y Press to activate one of the 6 auto programs select the led color Auto Programs Auto Program Description 1 3 5 work with only laser 2 4 6 work with laser and led The wireless Remote IR will immediately override the lt MODE gt button No additional settings are required
3. mmer channel is used only as a 0 to 100 switch A Always connect the fixture to a circuit with a suitable electrical ground Mounting Rigging Be sure that the structure can support the weight of the fixture Please see the Technical Specifications for a detailed weight listing Mount the fixture securely Do this with a screw nut and bolt ora hanging clamp When rigging consider routine maintenance Please see the following notes on installation Adjustable Stand Angle Adjustment Knob Angle Adjustment Knob When aiming the fixtures you may use the bracket adjustment knob s Loosen the knob s adjust to the desired angle and then tighten the knob s by turning clockwise Do not use tools for this step as it may cause damage OPERATING INSTRUCTIONS Manual Mode Access the three different operating modes available in this fixture by using the lt WORK MODE gt button on the front panel Press lt WORK MODE gt to cycle through the modes Please see a description of each mode below Mode Description 1 Sound active The LED indicator on the front of the fixture will be green when the Sound active mode is selected 2 Autorun The LED indicator on the front of the fixture will be red when the Autorun mode is selected 3 Autorun and Sound active auto switching The LED indicator on the front of the fixture will be orange when the Autorun and Sound active auto switching mode is selected Wireless Remote
Download Pdf Manuals
Related Search