802.11n Wireless Outdoor Access Point
Contents
1. to seal the bottom of the WNAP 6305 STEP 4 Take out the power cord and PoE injector plug Users MUST use the Power cord amp PoE Injector the power cord into the DC port and plug the 5 shipped in the box with the WNAP 6305 other side of the RJ 45 cable in the STEP 2 into Otherwise the product may be damaged the POE port of the PoE injector 5 Web Login To LAN Switch or PC Connect the WNAP 6305 with your PC by an Ethernet cable plugging in LAN port of PoE injector in one side and in LAN port of PC in the other side Power on the WNAP 6305 by PoE from PoE injector Assign a static IP address to your PC which should be in the same network segment with the WNAP 6305 As the default IP address of the WNAP 6305 is 192 168 1 1 you may choose from 192 168 1 2 to 192 168 1 254 Then click OK Open the web browser on your PC key in the IP address 192 168 1 1 of the WNAP 6305 in the address bar and then enter The default User name and Password are both admin Enter them and then click OK Connect to 192 168 1 1 FA gt The server 192 168 1 1 at Router requires a username and Password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection User name admin Password TTT Remember my password Lox cancel When you enter into the Web User Interface click Setup W2. J PLANET 2 Installation Precautions Users MUST use a proper and well installed surge arrestor and grounding kit with WNAP 6305 otherwise a random lightening could easily cause fatal damage to WNAP 6305 EMD Lightning DAMAGE IS NOT COVERED UNDER WARRANTY Users MUST use the Power cord amp PoE Injector shipped in the box with the WNAP 6305 Use of other iF Package Contents options will cause damage to the WNAP 6305 Thank you for choosing PLANET WNAP 6305 Before installing the AP please verify the contents inside the package box Users MUST power off the WNAP 6305 first before connecting the external antenna to it otherwise damage might be caused to the WNAP 6305 itself WNAP 6305 Quick Guide Mounting Tie x 2 Power Adapter PoE Injector Protective Plug x 2 If there is any item missed or damaged please contact the seller immediately Rear Panel Description LED Indication STEP 1 Push the latch in the bottom of WNAP 6305 to remove the sliding cover Power LED Wireless LED WAN Port LED LAN Port LED a PWR WLAN WAN Fe A Fe O Q amp Q dy Cj Rear Panel Description Port amp Connector STEP 2 Plug the RJ 45 Ethernet cable into the LAN Port RP SMA Connector of WNAP 6305 Connect to External Antenna Qa a LAN Port WAN Port Connect to PC via PoE Injector Connect to DSL Cable Modem STEP 3 Slide the cover back and insert the protective STEP 5 Successful installation plug
3. izard at the left hand side of the screen Once the basic configuration of the AP is done Click Apply button to make the change take effect WNAP 6305 802 11n Wireless Outdoor Access Point Access Point Status This page show the current status and some basi System Information Firmware Version 1 0 17 N_H_P System Up Time 52 mins 34 secs FURTHER INFORMATION The above steps introduce simple installations and configurations for WNAP 6305 For further configurations of different operation modes please refer to the user s manual in the CD If you have further questions please contact the local dealer or distributor Default IP Address 192 168 1 1 3 where you purchased this product Default Username admin Default Password admin Default SSID default 2011 E10420 001
Download Pdf Manuals
Related Search