MNTZ36W Wall Mount Bracket User`s Manual
Contents
1. MNTZ36W Wall Mount Bracket U o Compatible with Digimerge Camera Models DPZ36W023 DPZ36W030 o Compatible with Accessories MNTZ36R Corner Mount MNTZ36P Pole Mount o Usage Cautions and Warnings Product Characteristics This product has been designed to be used in the installation of speed dome cameras This product has been Please read through the User Manual and all safety instructions prior to use fabricated using strong corrosion free aluminum alloy material e All the safety and operating instructions should be read before installing Follow all operating instructions e Installation must be performed by a trained professional Prior To Installation Do not use the product with cameras other than the recommended models Avoid installing the mounting onto an unstable structure such as a gypsum wall panel Install the mounting onto a strong structure The mounting has to be installed onto a firm and stable location that cain such as a concrete wall steel beam etc Use concrete screws with plugs or other installation tools when installing the mount onto support the weight of the camera and mount Ensure all parts are completely secured a concrete structure Make sure that all the screw parts are metallic Do not use this product for other purposes Avoid screwing too close to the edge of a piece of wood when screwing into a wooden structure Installation Drill holes in the surface for the cables and mounting screws an2. d run the cables through the cable hole Run the cables through the mount and attach the mount to the surface using the 8x38 screws 4ea and 6x20 washers 4ea Wrap seal tape around the thread at the bottom of the mount Insert the rubber gasket between the camera adapter and the adapter flange and connect the adapter flange to the camera adapter using the PH M4x8 screws 4ea Run the cables through the camera adapter assembly and screw the camera adapter assembly onto the mount Install the camera into the camera adapter see instructions on back of sheet RUBBER GASKET Aluminum amp Steel body Unit 1 4Kg CAMERA ADAPTER Dimensions MS PH M4x8 334 SUS 4EA NOTE Camera installation requires the M4x12 mounting screws supplied with the camera Make sure the o rings are attached to the mounting screws and dome cover torx screws to prevent water ingress Accessories Nof Paname dwj A SCREW 8x38 SUS b LS 2 z 140 amp amp Jx f 110 140 w WASHER 6x20 ji il a SEAL TAPE 12mm ea SCREW PH M4x8 SUS SL RUBBER GASKET SILICON 85 6 MNTZ36W Wall Mount Bracket Use ATTENTION Make sure the o rings are attached to the mounting screws and dome cover torx screws to prevent water ingress Installing the camera into the camera adapter Connect the cables inside the camera adapter Loose
3. n the dome cover torx screws 3ea and remove the dome cover from the camera base 3 Mount the camera base to the 1 holes in the camera adapter using the M4x12 screws 4ea supplied with the camera with o rings attached Attach the dome cover to the camera base using the dome cover torx screws Sea with o rings attached Camera Adapter Hole 1 4EA Camera Base O Rings 4EA M4x12 Screws 4EA N Dome Cover O Rings 3EA N D Torx Screws 3EA 4
Download Pdf Manuals
Related Search