Bluestick Quick Start Guide
Contents
1. beep and vibrate once The second reading WILL NOT be recorded on the reader Note To prevent the reader from shutting down or going into sleep mode turn on the Bluetooth by holding down the right arrow for three seconds This action also turns the Bluetooth off For further information and more advanced instructions go to the DATAMARS Quickstart Guide in the packaging and the User Manual stored on the SD card in the reader To transfer animals via the NLIS Database install the Datamars NLIS Link Software that is stored on the reader Instructions are also stored on the reader Please contact Datamars during business hours on 61 7 3635 8222 or 1300 594 696 for further assistance Copyright Datamars 20142. result of an unsuccessful reading session TAG NOT FOUND ON FOR READING Copyright Datamars 2014 DATAMARS 3 How to DELETE a session 3 1 Switch the Bluestick ON OFF by pressing the button located on the lower centre of the panel 3 2 Press the S button and hold for a second lt NEW FILE gt and lt NEW FILE gt menu will appear S TO CREATE FILE 3 3 Press the Right Arrow two times 3 4 Press the S button to browse DELETE FILE Press the Right Arrow to find the Control File scanning session that you would like to delete lt BS 000000_0000 gt Note The BLUESTICK reader has a default Control File Scanning Session shown above as BS 000000_0000 which can have the scanned tags cleared from however it is unable to be deleted In the event of devices being read into the default session each tag is marked with the date and time time stamped of reading Therefore the tag can be identified separately in the DATAMARS NLIS Link download transfer software 3 5 Press the S button to select which file to delete Press Left arrow for YES Press Right arrow for No 3 6 Once the files have been successfully Deleted press the ON OFF button twice to return to scanning mode Note The BLUESTICK will only read one RFID device per scanning session control file When a tag is read for the first time the reader will beep and vibrate twice If the tag is read for a second time it will only
3. DATAMARS DATAMARS BLUESTICK QUICKSTART GUIDE 1 How to Set up a NEW scanning session 1 1 Switch the Bluestick ON Off by pressing the button located on the lower centre of the panel 1 2 Press the S button and hold for a second lt NEW FILE gt and lt NEW FILE gt menu will appear S TO CREATE FILE 1 3 To create a new file press the S button NEW FILE will appear with lt BS YYMMDD Time NEW FILE Ea Note Example shown is 18 07 2012 8 35am lt BS 120718_0835 gt 1 4 Press the S button again and lt NEW FILE gt lt NEW FILE gt menu will appear again S TO CREATE FILE 1 5 Press the ON OFF button and hold for a second ON FOR READING until ON FOR READING appears in the display S TO ENTER MENU You are now ready to start scanning your livestock Operating the BLUESTICK Scanner 2 How to scan RFID NLIS Tags Place the BLUESTICK near 25cm the NLIS tag to be read then press the ON OFF button in order to activate the reading mode During the reading mode move the reader along the ON FOR READING animal towards the ear to scan the RFID NLIS tag S TO ENTER MENU The following figure shows the results of a successful reading session Type of tag H HDX or F FDX Number of tags read in the session Note Example shown is for 21 tags 000021 H A000000 964 000123456789 Country Code ID NLIS Number ISO Short Animal 964 000123456789 16 char The following figure shows the
Download Pdf Manuals
Related Search