User Manual - Drive Medical
Contents
1. warranty details Your Drive branded product is warranted to be free of defects in materials and workmanship for one year from date of purchase This device was built to exacting standards and carefully inspected prior to shipment This warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the customer In the event of a defect covered by this warranty we will at our option supply parts or replace the device This warranty does not cover device failure due to owner misuse or negligence or normal wear and tear The warranty does not extend to non durable components such as rubber accessories castors and grips which are subject to normal wear and need periodic replacement If you have any queries or require full warranty conditions please contact your Drive stockist It is recommended that the rollator is serviced on an annual basis if the rollator is used by a single user If the rollator is used in a multi user environment such as in communal housing servicing may be required more frequently Any servicing maintenance or repairs should be done by competent personnel such as a Drive Medical dealer drive Drive Medical Ltd Ainley s Industrial Estate Elland West Yorkshire GB Hx5 9JP www drivemedical co uk Doc code WA018_IFU Iss 11 14 x fold rollator C www drivemedical co uk Handle Height Adjustment safety procedures 12. locked on the two rear wheels should not be i Seat dimensions cm 23 L x 46 W x 56 H Overall dimensions in 27 L x 25 W x 32 37 H able to turn Seat dimensions in 9 L x 18 W x 22 H e All the fasteners screws nuts and bolts are Weight 7 5ke i7lb to be checked regularly to ensure they are securely tightened Weight Limit 135kg 21 stone Check that the front castor wheel s swivels treely Withdraw the walker from use if it does not Brake Operation To use as parking brakes push down on both brake levers see A and release when the brakes are locked on To release the brakes push up on both levers and release To use the brake to slow the rollator down pull up on both brake levers see B Release the levers to take the brakes off Kerb and Obstacle Climbing To lift up the front wheels of the rollator to help negotiate kerbs and other obstacles press down on the stepper lever As shown ie Stepper Lever parts description _ Brake Lever Back Rest Seat Lift Up Strap Height Adj Button Front Castor e 1 Install the top section of the rollator by pulling upwards on the handles or backrest 2 Lock the to fold the rollator handle tubing Reverse the previous procedure to fold the upright by rollator as described below flippin
3. Make sure the rollator is fully opened the seat is down and the frame is locked securely To adjust the handle height push the brass button and raise or lower the handle until it is locked at the desired height Ensure both handles are set to the same height 2 Ensure that hand grips are at equal heights Test the rollator for stability before applying full weight to hand grips 3 Ensure that good health and safety practice is used for carrying and lifting items such as the rollator 4 Always lock the brakes before sitting and do not use seat when on a gradient or uneven ground 5 Replace the tyres when significantly worn or damaged care and maintenance 6 For your health and comfort make sure that you adopt a comfortable posture and that you i Ensure the walker is used only as an aid for can operate the brakings with ease Check the mobility brakes function correctly i e Stop the rear wheels e Ensure the walker is kept clean Wipe down from turning when the brakes are applied the walker with a damp cloth on a regular 7 Do not exceed the maximum weight limit of 135kg basis 21 stone Check the moving parts e g wheels and height adjustment regularly All moving parts a 7 should operate freely without excessive specification movement or play Overall dimensions em 68 L x 64 W x 81 94 H Ensure that the hand operated cable brakes are functioning correctly When squeezed or
4. g over the camlock 1 Remove the bag lever 2 Fold the rollator up by pulling up on the strap in the centre of the seat sling as shown 3 Secure the camlock I M 3 Release the camlock levers and flip over to lever by pushing the allow release handle tubing lever in to the slot shown 4 Slowly lower the handle tubing to fully fold the rollator 4 Push down on the cross brace rails until the rails are sat in the plastic receivers 4 5 1f the bag is required hook the bag loop over the receiver on both ends of the cross brace rails as shown
Download Pdf Manuals
Related Search