MCW Application Notes - Motor Control Warehouse
Contents
1. Ifthe switch connected between terminals 24V amp DI6 is opened while the drive is running the drive will inhibit and coast to a stop Page 1 Keypad control Jog Connect the HEDY HD700 to the mains supply and motor according to the information in the HEDY HD700 Easy Start Guide Apply power to the drive so its display shows 0 00 Enable the drive by closing a switch between terminals 24V amp DI6 24V and Enable Press the MF multi function key The drive will run up to the jog speed P01 04 with the acceleration ramp controlled by the jog acceleration ramp P02 22 Jog speed is 5 00Hz as default and jog acceleration is 10 0s Release the MF multi function key The drive will decelerate to 0 00Hz controlled by the jog deceleration ramp P02 23 and then disable Jog deceleration is 10s by default ME Multi function key Function Select The functionality of the MF key can be changed to suit the application Parameter P05 07 controls the functionality of the MF key 0 Jog reference default 1 Forward Reverse 2 Coast to Stop 3 Reserved To access the advanced parameters set P00 23 1 Press the PRG key once and then press the ESC key once The display should show GrOO Press the UP key so the display shows Gr05 Press the PRG key so the display shows P05 01 Press the UP key so the display shows P05 07 Press the PRG key so the display shows a flashing 0 Press the UP key to select the require2. MCW Application Notes 25 August 2015 es Warehouse www motorcontrolwarehouse co uk Document number MCW HEDY 008 Revision 0 0 Author Gareth Lloyd Product HEDY HD700 Title HEDY HD700 Keypad Control Setup information Summary This document gives information on how to set up the HEDY HD700 for keypad control NOTE Please read this document in conjunction with the HEDY HD700 Easy Start Guide and HEDY HD700 Advanced User Manual As default out of the box the HEDY HD700 is set up in keypad control Keypad control forward operation only Connect the HEDY HD700 to the mains supply and motor according to the information in the HEDY HD700 Easy Start Guide Apply power to the drive so its display shows 0 00 Enable the drive by closing a switch between terminals 24V amp DI6 24V and Enable Press the green RUN key The green RUN LED will illuminate and the drives output will become active Press the UP key The frequency speed on the display will increase until the UP key is released The rate of acceleration is controlled by the setting of P00 08 Press the DOWN key The frequency speed on the display will decrease until the DOWN key is released or the frequency speed reaches 0 0Hz The rate of deceleration is controlled by the setting of P00 09 Ifthe drive is running and the STOP key is pressed the drive will decelerate to a stop under the deceleration ramp controlled by P00 09
3. d function of the MF key Once the selection has been made press the PRG key to implement and save Press the ESC key twice for the display to show 0 00 Keypad control forward amp reverse operation Connect the HEDY HD700 to the mains supply and motor according to the information in the HEDY HD700 Easy Start Guide Apply power to the drive so its display shows 0 00 Set parameter P05 07 1 as explained above Enable the drive by closing a switch between terminals 24V amp DI6 24V and Enable Press the green RUN key The green RUN LED will illuminate and the drives output will become active Press the UP key The frequency speed on the display will increase until the UP key is released The rate of acceleration is controlled by the setting of P00 08 Press the MF key to reverse the direction of motor rotation The display will show a negative frequency Press the DOWN key The frequency speed on the display will decrease until the DOWN key is released or the frequency speed reaches 0 0Hz The rate of deceleration is controlled by the setting of P00 09 Ifthe drive is running and the STOP key is pressed the drive will decelerate to a stop under the deceleration ramp controlled by P00 09 Page 2 If the switch connected between terminals 24V amp DI6 is opened while the drive is running the drive will inhibit and coast to a stop Keypad reference at power up The keypad reference at power up can be chang
4. ed by the setting of parameter P01 11 0 Starting reference is minimum speed after a power up 1 Starting reference is the keypad reference before the drive was powered off 2 Starting reference is Preset speed 1 P00 16 Page 3
Download Pdf Manuals
Related Search