USER`S MANUAL - RF Logics Inc
Contents
1. 9 Operation 9 1 Apply power and you can see Red LED is on indicating the reader is in standby 9 2 Present proximity card to the reader until you hear beep sound and the LED is changing the color to Green simultaneously and the reader send RF card data to the controller then LED changes the color to Red again for next reading 9 3 LED Control To change the LED colors you may connect LED Control Input Y ellow wire to power ground then the Green LED is on indicating the reader is in standby Present proximity card then the LED changes the color to Red simultaneously then Green again for next reading 9 4 Buzzer Control When the reader reads proximity card only one beep sound generates in normal operating mode but you can generate more beep sounds to distinguish whether the access is granted or denied To generate more beeps you may control the Buzzer Control Input Blue wire to power ground then you can turn beeper on while you hold Buzzer Control Input to power ground Star RF10 Star RF20 Proximity Card Reader 10 FCC Registration Information FCC REQUIREMENTS PART 15 Caution Any changes or modifications in construction of this device which are not expressly approved by the responsible for compliance could void the user s authority to operate the equipment NOTE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful in2. IN THE UNITED STATES RF LOGICS Inc Service Center Headquarters and Western Region 370 Amapola Ave 106 Torrance CA 90501 Phone 310 782 8383 Fax 310 782 8298 E mail rflogics rflogics com Web site www rflogics com OUTSIDE OF THE UNITED STATES IDTECK CO LTD Service Center 5F Ace Techno Tower Bldg 684 1 Deungchon dong Gangsuh gu SEOUL 157 030 KOREA Tel 82 2 2659 0055 Fax 82 2 2 659 0086 E mail webmaster idteck com Web site www idteck com Please use the original container or pack the unit s in a sturdy carton with sufficient packing to prevent damage include the following information 1 A proof of purchase indicating model number and date of purchase 2 Bill to address 3 Ship to address 4 Number and description of units shipped 5 Name and telephone number of person to contact 6 Reason for return and description of the problem NOTE Damage occurring during shipment is deemed the responsibility of the carrier and claims should be made directly to the carrier Star RF10 Star RF20 Proximity Card Reader MEMO 10 Star RF10 Star RF20 Proximity Card Reader MEMO 11 Star RF10 Star RF20 Proximity Card Reader The specification contained in this manual are subject to change without notice at any time 5F Ace Techno Tower B D 684 1 Deungchon Dong Gangseo Gu Seoul 157 030 Korea Tel 82 2 2659 0055 Fax 82 2 2659 0086 E mail webmaster idt
3. Star RF10 Star RF20 Proximity Card Reader USER S MANUAL Star RF10 Star RF20 Proximity Card Reader Rev 5 4 0 IDTECK star R10 Star RF20 Proximity Card Reader Table of Contents 1 Important Safety Instructors ian 3 e E T HT 3 3 remes inn ton anna ina 4 da Per wi 4 2 Idenaying SUDDIIGU apa 4 b InstallaBon OF me PROG aon 5 T Color Coded amp Wiring VAD mai 6 8 Wire Connection to Controller rennen 6 9 ODS AMON satu ii 7 10 FCC Registration Information oo oom 8 LL Warranty ana SENICE ia oa aa 9 star R10 Star RF20 Proximity Card Reader 1 Important Safety Instructions When using Proximity Card Reader basic safety precautions should always be followed to reduce the risk of fire electrical shock and injury to persons In addition the following safety guides should also be followed Fully read and understand all instructions and follow them completely Follow all warnings and instructions marked on the product Do not use liguid or aerosol cleaners Use a damp cloth for cleaning If necessary use mild soap Do not use this product near water Only operate this product using the type of power source indicated If you are not sure of the type of power supplied to your installation site consult your dealer of local power company Never insert objects of any kind into the product or through the cabinet slots as they may touch voltage points and or short circuit parts possibly resulting in fire or ele
4. ctric shock Never spill liquid of any kind on the product Never disassemble this product by yourself take the unit to a qualified service center whenever service or repair is required Opening or removing the covers may expose you to dangerous voltages or other risks Also incorrect reassembly can cause electric shock when the unit is subsequently used Unplug this product from the Direct Current DC power source and refer to qualified service personnel under these conditions a When the power supply cord or plug is damaged or frayed b If liquid has been spilled on the product c Ifthe product does not operate normally after following the operating instructions in this manual Adjust only those controls that are covered by the operating instructions in this manual Improper adjustment of other controls that are not covered by this manual may damage the unit and will often require extensive work by a qualified technician to restore normal operation d Ifthe product exhibits a distinct change in performance AA lo OO 2 General The STAR RF 10 RF 20 is an elegant looking and an attractive 4 read range proximity reader which can be mounted to metal door frame mullion or any flat wall surface The STAR RF 10 RF 20 use the same electronics module in epoxy potting that ensure you successful operation even in harsh environments The different bezels allow you to interchange the bezel for different applications or wall conditi
5. eck com Copyright IDTECK Co Ltd IDTELX
6. ertical and drill one 1 2 hole for the reader cable 1 7 4 31cm apart from the top hole If you have installed electric gang box then skip this step 6 2 Put reader cable into the center hole and install the reader module by using two 6 32 or M3 screws 6 3 Put bezel into the reader module then push bezel until you hear the locking sound Top 6 37 hole 1 7 T ST 3lem 2e a 8 38cm 12 hole opi i H le VE aa 6 32 hole 6 32 or M3 Screws 6 32 or M3 Screws Bottom Bezel Wall Mount icd oun Hie cue Iyan box Mount Mullion Mount Electric Ganz Box Mount Star RF10 Star RF20 Proximity Card Reader 7 Color Coded amp Wiring Table POWER Power DC 5V 17V DC 4 Red wire Power DC Ground DC GND Black wire INPUT Buzzer control input BUZZER Blue wire LED control input LED Yellow wire OUTPUT Wiegand Format Wiegand Data 0 Data 0 Green wire Wiegand Data 1 Data 1 White wire OUTPUT ABA Track II Format ABA Card Present CP Orange wire ABA Clock CLK White wire ABA DATA Data Green wire OUTPUT RS232C Format RS232C TX TX Violet wire 8 Wire Connection to Controller Access Controller Output Format RS232C Wiegand ABA Power DC Power DC CP Datal CLK Data 0 Data LED Control Input Buzzer Control Input Red Black Orange White Green Yellow Blue Violet Wire Connection to Controller star R10 Star RF20 Proximity Card Reader
7. ons Two color LED of green and red inside Piezo buzzer sound will guarantee you an accurate and reliable system operations Star RF10 Star RF20 Proximity Card Reader 3 Features Read Range Up to 4 10cm Wiegand RS232 Optional ABA Track Il magnetic stripe O ptional format available Metal door frame mullion RF 10 RF TINY and wall mount RF 20 PSK modulation Solid Epoxy potted 100 Weather P roof Dual reading tech reader Active and Passive Reverse power polarity protection User format available Supervisory signal optional 4 Specification Read Range Time Power Output Format External Buzzer control Input External LED control Input LED Buzzer Color Operating Environment Dimensions WxHxD Weight 5 Identifying Supplied Parts Please unpack and check the contents of the box Up to 4 10cm 30ms DC 5V 12V Max 180mA 26 Bit Wiegand RS232C ABA Track II Low Active DC 0 12V Max 50mA Low Active DC 0 12V Max 50mA 2 Color LED Red and Green Piezo Buzzer Dark Pearl Gray 31 F 149 F 35 C 465 C 0 90 Humidity RF 10 1 82 x4 81 x0 87 46x122x23mm RF 20 3 00 x4 89 x0 87 76x124x23 5mm 0 351b 160g Reader Module RF 10 Bezel or RF 20 Bezel User s Manual 1 ea 1 ea IDTELX 1 ea 1 ea 4 Star R10 star RF20 Proximity Card Reader 6 Installation of the Product 6 1 Mullion Wall Mount Drill two 6 32 or M3 holes 3 3 8 38cm apart in v
8. terface and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to this equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on the user is encouraged to try to correct interference by one or more of the following measures Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on another circuit 4 Consult the dealer or an experienced radio TV technician for help 3 star R10 Star RF20 Proximity Card Reader 11 Warranty and Service The following warranty and service information applies only to the United States of America and Republic of Korea For the information in other countries please contact your local distributor To obtain in or out of warranty service please prepay shipment and return the unit to the appropriate facility listed below
Download Pdf Manuals
Related Search