Planet Audio® Single DIN In-Dash DVD/CD/MP3/USB
Contents
1. PIN WIRE COLOR FUNCTION LABEL A4 YELLOW CONSTANT POWER A5 BLUE WHITE REMOTE AMP WIRE A7 RED ACCESSORY POWER A8 BLACK GROUND B1 VIOLET RIGHT REAR SPEAKER 4 B2 VIOLET BLACK RIGHT REAR SPEAKER B3 GREY RIGHT FRONT SPEAKER B4 GREY BLACK RIGHT FRONT SPEAKER B5 WHITE LEFT FRONT SPEAKER B6 WHITE BLACK LEFT FRONT SPEAKER B7 GREEN LEFT REAR SPEAKER GREEN BLACK LEFT REAR SPEAKER THE FUNCTIONS OF MAIN UNIT KEX BAND i1l SUB W o LIST SRC lt Te m Y lt W wu 14 12 No Item Decriptions DA GD RELEASE gt Press this button to open the control panel Press this button to access into the SystemMenu mode INFO Under DVD playback mode press repeatedly to view play information Title gt Play time ENCODER Rotate the Encoder Volume Knob to increase and decrease the VOLUME volume The Maximum volume level is 46 BAND Pll gt Under Tuner mode short press this button to change between BAND FM1 FM2 AM1 MW1 or AM2 MM2 if available Under Media playback mode short press this button to Pause i Resume Play the music SUB W Press and hold this button2. d 17 WET vr nmm p rd 3 x 22 22 2 A TFT Monitor anel AUX Input WARNINGS When Driving Keep the volume level low enough to aware of the road and traffic conditions CAUTION In some countries it s unlawful to operate a vehicle while video is displayed in the driver s viewing area Please always switch the unit s display to Font Type Display mode by pressing the DISP button while driving For safety reason the driver should only enjoy watch the video while the car is in parking mode When Car Washing Do not expose the product to water or excessive moisture This could cause electrical shorts fire or other damage CAUTION In order to avoid any accident the driver must not watch video while driving This unit is designed to not allow watching moving video while driving Park your car in a safe place and engage the PARKING BRAKE WIRE before watching moving video When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle Give the interior a chance to cool down before starting playback Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system the regular system in a North American car gt Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player Failure to follow this may cause malfunction or pe
3. TFT Screen Section Screen Size 3 2 Measured Diagonally Screen Type TFT Liquid Crystal Display active matrix Resolution 320 x 240 MultiMedia CD Section Compatible Disc Format Signal to Noise Ratio Dynamic Range Frequency Response Channel Separation Video Section Color System Video Output Video Input Audio Section Max Output Power Load Impedance speakers Line out level load Line out Impedance Auxiliary Input Section Frequency response Input Maximum Voltage Input Impedance Radio Section FM Frequency Range Usable Sensitivity Stereo Separation S N Ratio AM or MW Frequency Range Usable Sensitivity S N Ratio BLUETOOTH Power Consumption Output Power Frequency Band Range Standard General Operating Voltage Grounding System Fuse Operating Temperature Unit Mounting Angle See Disc Note for more details description gt 90 dB gt 90 dB 20Hz to 20Khz 3dB 2 Channel Stereo gt 60dB 1khz NTSC PAL SCEAM Composite 1 0 Vp p 0 2 75 ohm Composite 1 0 Vp p 0 2 75 ohm 80W x4 channels 4 ohms 400mvV 10k ohm load 200 ohm 20Hz to 20KHz 3dB 1200mV 4 7k ohm 87 5 107 9 MHz U S A 87 5 108 0 MHz Europe lt 15dBat S N 30 dB 25 dB at 1KHz 50 dB 530 1720 U S A 522 1620 Khz Europe lt 40dB at S N 20dB 40dB 200mA Max 0 dBm Class II 2 4GHz 2 4835GHz ISM Band 3 meters free space Bluetooth 2 0 specification DC 11 14
4. defective disc new one The radio does not The antenna cable is not Insert the antenna cable firmly Work connected The radio station automatic selection The signals are too weak Select a station manually does not work ERROR Mechanism Error Press the eject button to correct the problem If the error code does not disappear consult your nearest service dealer Disc Error Maybe disc dirty disc scratched Replace the disc disc upside down If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household Hes waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice Waste Electrical and Electronic Equipment Directive Car Audio amp Electronics Unmatched technology for unforgettable driving
5. Area U S A Europe Oirt Latin Adjust System Setting User can rotate the Encoder Volume Knob to select the System Settings then press Power Mute to confirm m Beep Tone To adjust the Beep Tone On Off The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed onthe face of the radio m Time Set The time on the clock will be set to 12 00 as the default User can rotate the Encoder Volume Konb to adjust the HOUR MINUTE Preset Equalizer Setting Under the Preset EQ Setting there are the below 8 different types of preset equalizer available for user selection EQ p Classic TIPS Press and hold LIST button on the front panel is to quick get into the Preset Equalizer Setting menu TUNER OPERATIONS Press the FUNC button under Tuner mode access into the Tuner Function menu User can rotate the Encoder Volume Knob to select the below options m Manual Store Use this function to saved the current frequency to memory stations User can press the Power Mute to enter into the manual store memory stations m Auto Store After Auto Stored amp saved the 6 strongest stations the unit will automatically enter present scan one time m Local Seek To receive more radio stations or only stations with strong signal you can adjust the tuner sensitivity User can press the Power Mute to turn On Offthe Local Seek mode Local Seek On Only stati
6. media playback mode press these buttons to skip a chapter track scene file FAST BACKWARD gt Under media playback mode press and hold momentarily to FORWARD fast forward backward the Disc SOURCE Press this button to select different source playback mode TUNER DISC USB SD CARD BT AUDIO AUX IN ESC Press this button to quick return previous menu or mode DI Hold amp press this button to adjust the TFT dimmer High or Low Under the Bluetooth Handfree mode press this button to end or reject incoming call evect gt Press this button to eject the Disc DISC SLOT gt Insert the disc into CD slot The CD will begin to play RESET gt User can reset the unit to its default setting Press this button by using a ball point pen or sharp object SD CARD This unit can support playback MP3 WMA JPEG MPEG4 SLOT DIVX format which are stored on the SD Card USB SLOT gt This unit can support playback MP3 WMA JPEG MPEG4 DIVX format which are stored on the USB memory stick AUXIN JACK This unit is allowed to connect with external Audio system D such like Player hand phone User can connect the external Audio system thru the Aux In jack on front panel THE FUNCTIONS OF REMOTE CONTROL 10 13 14 12 15 18 19 20 21 ic 24 16 22 25 7 26 23 Planet Audio No Button Item Decriptions P
7. search Bluetooth device e CW80 should appear in the pairing list on the Mobile Phone User need to select CW80 and then input the password 1234 If the pairing is successful the below display will show on TFT for a while User can use the Encoder Volume Knob to adjustthe volume level e Toendthe conversation pressthe button The unit will switch back to the previous mode automatically and release the mute ofthe previous mode atthe same time NOTE An Incoming call under stand by mode Ignition on amp Power Off the system will automatically switch on the head unit m Rejecting An Incoming Call ESC User can press incoming call button to reject the Nokia 3120 AB and the unit will switch back to the previous mode automatically 5 Disconnecting of the Bluetooth System Open your Mobile Phone and disconnect the Bluetooth System with the unit e f the Disconnection is successful the below display will show on TFT Disconnect 94 10 and the unit will switch back to the previous mode automatically Answering An Incoming Call e When there is an incoming call the display will show the Phone Number If the incoming call has no caller 1 0 number the LCD will display Phone user can short press the button to answer accept the call e lo end the conversation press the NOTE The audio output of the present mode will be
8. skip forward to the beginning of the next or previous chapter e Press and hold the to fast forward or fast rewind through the disc Press these buttons again to resume normal playback 3 Press 4 totake outthe CD Flip open the USB plastic cover insert the USB device into the USB socket The unit starts playing from the USB device automatically Ensure that the USB device contains playable music m Insert The Memory Card 1 Press amp onthe front panel to release the panel 2 After flipping down the front panel push rightwards then draw the left of the panel 3 Insert the Memory Card into the card slot then close the panel the unit will play starts automatically m Remove The Memory Card press the card until you hear a click sound the card is now disengaged then remove the card gt Repeat During the media playback press the FUNC button to adjust the different Repeat mode For MULTIMEDIA VCD mode e Repeat CH repeat playback the current the chapter e Repeat TT repeat playback the currenttitle e Repeat Off cancel all the repeat function For MP3 WMA CD mode e Repeat Off play all tracks repeatedly e Repeat One play the current track repeatedly e Repeat Folder play all tracks in the current folder repeatedly User can play audio tracks files or VCD videos in random order During the playback press the FUNC button to turn On Off the random
9. to turn On Off the subwoofer function Press this button to enter into the Function mode FUNCTION 5 gt Hold amp press this button to turn On Off the Bass booster function THE FUNCTIONS OF MAIN UNIT gt Press this button to view the Clock press this button again CLOCK to return to previous mode Under the Bluetooth Handfree mode short press this button Q DIAL to answer an incoming call 4 gt Under the Bluetooth Handfree mode long press this button to TRANSFER enter into call Tansfer back to Mobile Phone MUTE gt Short press this button to turn Mute or restore volume D Press this button or any other button on the front panel POWER except Release button to turn the unit on Hold amp press this button again to turn the unit off gt Under tuner mode press this button to Show The List of stored station gt Under the Media playback mode press this button to list the searching of Tracks or Files on the Media playback mode LIST Under the DVD MP4 mode press this button to list the searching of DVD Root Menu or Files on the playback mode Under the VCD mode press this button to turn On Off the PCB function Hold amp press this button to select the Preset Equalizer setting TUNE UP DOWN Under tuner mode press and hold this button momentarily to enter into the Auto Seek Manual Seek mode FILE UP DOWN gt Under
10. 4V Negative Ground 15 Amp Mini ATM Type 0 C to 50 C 32 F to 122 F lt 30 TROUBLESHOOTING Before going through the check list check wiring connection If any of the problems persist after check list has been made consult your nearest service dealer Smpom _ _ The car ignition is not on If the power supply is properly connected to the car accessory terminal switch the ignition key to ACC The fuse is blown Replace the fuse Disc cannot be Presence of CD disc inside Remove the disc in the player then loaded or ejected the player put a new one Inserting the disc in reverse Insert the compact disc with the direction label facing upward Compact disc is extremely Clean the disc or try to play a new one dirty or defective disc Temperature inside the car is Cool off or until the ambient temperature too high returns to normal Condensation Leave the player to off for an hour or so then try again No sound Volume is in minimum Adjust volume to a desired level Wiring is not properly Check wiring connection connected The operation keys The built in microcomputer is Press the RESET button do not work not operating properly due to Front panel is not properly fixed into noise its place The installation angle is Adjust the installation angle to less Sound skips more than 30 degrees than 30 degrees The disc is extremely dirtor Clean the compact disc Then try to play a
11. BLACK BACK UP CAMERA IN OR VIDEO IN YELLOW AUDIO IN RIGHT RED AUDIO IN R AUDIO IN LEFT WHITE GU dQ AUDIOIN L VIDEO OUT MDEOOUT SUB W OUT REAR ISO CONNECTO SOCKET See Figure 1 C Q3GfYTONI LON 1 OL 3NI1uVvag ISO MALE CONNECTOR 2 YELLOW N Brake Switch ALIHM LIGHT GREEN 2 5m extension wire 5 tensio Ground VIOLET WHITE REVERSE OVERRIDE WIRE CONNECTOR B N LON q18VO OL LNO Mans ci a 4 8 CONNECTOR Figure 1 ISO CONNECTOR 4PIN 8PIN FEMALE WITH MALE TERMINAL ISO CONNECTOR WIRING CHART PARKING Connect to Parking Brake BRAKE
12. OWER ON Press this button to turn On Off the unit OFF MUTE Press this button to turn the Mute On Off SYSTEM MENU Hold amp press this button to enter into the System Menu mode o SOURCE Press this button to enter into the SOURCE mode Q VOLUME Press this button to increase the volume VOLUME Press this button to decrease the volume EQ Press this button to enter into the preset Equalizer setting mode Under the tuner mode press this button to access the gt gt Manual Seek mode Under the media playback mode press this button fast forward through the music under media player mode Under the tuner mode press this button to access the 44 Manual Seek mode Under the media playback mode press this button fast backward through the music under media player mode A Use these buttons to move cursor up down left right TI Z O 2 0 2 m Q 2 2 Under the tuner mode press this button access Auto Seek mode Under the media playback mode press this button to skip backward of the previous chapter Under the tuner mode press this button access Auto Seek mode gt Under the media playback mode press this button to skip forward of the next chapter 9 9 8 OK Use this button to confirm the selection Pres
13. ange the Color level from O to 7 Reset reset to default setting NIULITIIIEDIA AUGIO _ During the MultiMedia playback press the FUNC button access into the MultiMedia Audio to change the audio language MultiMedia only During the MultiMedia playback press the FUNC button access into the Subtitle to turn On Off subtitles and change the subtitles MultiMedia only Under the FUNC menu user can press Aangle while playing a scene recorded with multiple angles to change the angle MultiMedia only Aen E The TV Aspect setting allows the user to select the aspect ratio of the TV MultiMedia and VCD only Under the FUNC menu user can use the Encoder Volume Knob to select the following options 4 3 Aspect ratio of TV is 4 3 16 8 Aspect ratio of TV is 16 9 Both wide screen and 4 3 contents will fill the entire screen Aux In Mode Select the AV Mode Your can connect up to 1 AV device press the SOURCE button to enter into the Aux In mode Aux 11N Front panel Aux in AV 21N RCA back of unit gt Aux 1 In This unit is allowed to connect with external Audio Video system such like Digital Camera or Game Console User can connect the external Audio Video system thru the Aux In jack on front panel Connect the Aux In Connect the external signal to Aux In jack located at the front of the panel then press Source button to select Aux In mode Press Mode Button again to cancel Aux In
14. ard Note of and WMA Support Maximum 2000 files Maximum 30 characters display Supported Sampling frequencies 32kHz 44 1kHz 48kHz Supported Bit Rates 64 256 kbps variable bit rate Video Format Playback IMAGE JPEG DVD Video MPEG4 On CD ROM or Multimedia ROM or USB or Memory Card Noted of MPEG4 Supported decoding MPEG 4 video defined by ISO 14496 2 Standard 1 Simple Profile SP and 2 Advance Simple Profile ASP Supported file format MP4 and M4a audio only Unsupported Discs 8 cm Disc CDV CDI CDG LD MultiMedia RAM Note on Region Code MultiMedia players and MultiMedia Video discs Have their own Region Code numbers This unit Can playthe disc of all region code numbers Disc Maintenance Before playing wipe the disc using a clean cloth working from the center hole towards the outside edge Never use benzene thinners cleaning fluids or anti static liquids or any other solvent NOTE A disc may become somewhat scratched although not enough to make it unusable depending on you handle it and conditions in the usage environment Note these scratches are not an indication of any problem with the player Label side Up e c Do not bend 2 0 Never touch the under side of a disc Wipe the disc surface from the center to the edge INSTALLATION The following illustration shows a typical installation If you have any questions or require
15. ation User can listen to music files on an audio device on this unit if the audio device supports A2DP Advanced Audio Distribution Profile of Bluetooth Technology Please read the below instruction before operating the Bluetooth Audio streaming function on this unit I Connecting A Bluetooth Audio Device With This Unit Before using an audio device to play music on this unit the audio device must be paired with this unit first e Open your Mobile Phone and switch Bluetooth to on and search Bluetooth device e CW80 should appear in the pairing list on the Mobile Phone User need to select 80 and then input the password 1234 If the pairing is successful the below display will show on TFT for a while Nokia 3120 AB and the unit will switch back to the previous mode automatically TIPS If the audio device has both HFP Hands Free Profile and A2DP Advance Audio Distribution Profile this unit will automatically pair these two profiles at the same time For example if a mobile phone has both HFP amp A2DP profile and this mobile phone is already HFP paired with this unit A2DP audio device pairing is not necessary Also this paired mobile phone will be added automatically to the list of Paired Device Audio ofthis unit m Listening To Music From An Audio Device In This Unit 1 Connect this unit with the audio device NOTE Make sure the Bluetooth system is connecting with
16. dia mode press this button during playback to DSG AUDIO change the audio language if available on the disc e SUBTITLE Under MultiMedia mode press this button during playback to turn on off subtitles and change the subtitles Under MultiMedia mode press this button to bring up the Title Menu r m ADJUST SETTINGS Press the MENU INFO button access into the System Menu User can rotate the Encoder Volume Knob select the below options then press Power Mute to confirm SYSTEM MENU SYSTEM Adjust Audio Setting User can rotate the Encoder Volume Knob to select the below Audio Settings then press Power Mute to confirm m Bass User can use the Encoder Volume knob to adjust the desired Bass level range from 6 to 6 m Treble User can use the Encoder Volume knob to adjust the desired Treble level range from 6 to 6 m Fader User can use the Encoder Volume knob to adjust the Fader between the front and rear speakers from 12R full rear to 12F full front Balance User can use the Encoder Volume knob to adjust the Balance between the right and left soeakers from 12R full right to 12L full left Tuner Setting User can rotate the Encoder Volume Knob to adjust the Tuner Settings then press Power Mute to confirm m Tuner Area This option allows the selection of the frequency spacing appropriate for your area Rotate the Encoder Volume Konb to select the Tuner
17. e Audio device supports AVRCP 1 Start playing Every time the user switches to BT AUDIO mode this unit will automatically send a PLAY command via AVRCP to the audio device to command the auto start playing song in the audio device The PLAY command may differs depending on the Audio device If the Audio device is not able auto start playing after changing mode into BT AUDIO mode user may need to operate the PLAY mode on the audio device to start the song playback 2 Track up down by pressing the Track up down buttons on this unit 3 Pause Play by pressing the Pause Play button on this unit 4 Encoder Volume by rotating the Encoder volume knob on this unit 5 Audio Mute by pressing the Mute button on this unit 6 Stop playback by changing mode into any other mode of this unit The AVRCP operation may differ depending on the audio device m Handsfree Phoning While Bluetooth Audio Streaming If the connecting playback audio device is a mobile phone all the hands free function is still available under the Bluetooth audio streaming like the answering incoming call making an outgoing call etc Disconnecting An Audio Device With This Unit User can close the Bluetooth Audio connection by disconnecting with the audio device on the Mobile Phone For more detail and information on disconnecting with the unit please refer to the DISCONNECTION section SPECIFICATIONS
18. function MEDIA PLAYER OPERATIONS Disc USB SD Card 1 Under the Media playback press the LIST button access into the playlist menu User can rotate the Encoder Volume Knob to select the below options LIST French Everytimes we to Yesterday mp3 You not alone dd to display all available audio folders track o 7 to display all available pictures folders files e i to display all available video folders files 2 Under the MultiMedia playback mode press the LIST button can access into the MultiMedia Root Menu During the VCD playback press the FUNC button access into the Channel mode Press the Power Mute to select the available audio channels provided by the disc Stereo Left Right PBC playback allows you to play Video CDs interactively During the VCD playback press the FUNC button access into the Pbc mode press the Power Mute to turn PBC On or Off PBC On it will switch to OFF and continue playback PBC Off it will switch to ON and return to menu screen TIPS Press the LIST button on the front panel is quick to turn the PBC On or OFF Under MultiMedia VCD playback press the FUNC button access into the Video Setting mode the below Setup menu will appear Video Settings 7 Reset BRIGHT 05 CONTRAST ff BRIGHT change the Bright level from 0 67 CONTRAST change the Contrast level from O to 7 COLOR ch
19. information regarding installation kits consult your customer car audio dealer or a company suppling kits If you are not sure howto install this unit correctly have it installed by a qualified technician To attach the front panel back to the unit Trim Plate chassis firstly join a right guide block hole to the right cylinder Step D then ock hole and the left cylinder Step Disassembly tool Bend the appropriate tabs to hold the sleeve firmly When you stand the unit be careful in place not to damage the fuse on the rear Control Panel Removing the unit Before removing the unit release the rear section X Release Disassembly tools To remove the front panel 1 Press the Panel Release Button 2 After flipping down the front panel push rightwards Trim Plate Insert the two disassembly tools then pull Step Q then draw the left of the panel Step them as illuatrated so that the unit can be removed When using the optional stay When installing the unit without SEEDS using the sleeve Dashboard 8 Screw 4x12mm Screw Install the unit at an angle of less than 30 Installation using the screw holes on the sides of the unit Fastening the unit to the factory radio mounting bracket CONNECTING THE SYSTEM About Parking Wire In order to avoid any accident the driver must not watch video while driving This unit i
20. mode and retrun to previous mode gt AV 2In Connect the external signal to the RCA line in jack located at the rear ofthe unit then press SOURCE button to select AV 2 In If there is no any external AV System input then the TFT will be show NO VIDEO SIGNAL NO VIDEO SIGNAL BLUETOOTH OPERATIONS User Guide For Bluetooth 1 When using this Bluetooth HEAD UNIT please make sure the mobile phone you use supports Bluetooth functions Headset or Handsfree profiles or both 2 Before you start to use the Bluetooth HEAD UNIT please make sure you successfully paired your mobile phone with the system Please refer to the user manual section PAIRING for detail PAIRING instruction To ensure the best reception for Pairing or Re connection please make sure the Phone Battery is fully charged when making the Pairing or Re connection 3 Always try pairing the Mobile Phone with Head unit after a few minutes of the Mobile Phone being switched on to ensure the best pairing result 4 is this unit device model number which is displayed on the mobile phone 5 To achieve the best performance please always keep the Mobile Phone within 3 meters ofthe Head unit 6 Please always keep a clear path between the Mobile Phone amp the Head unit 7 Never put any metal object or any obstacle between the path of the Mobile Phone amp the Head unit 8 Some mobile phone brands like Sony Eric
21. muted and the ringing tones will be heard if an incoming call is not being answered After pressing the button the mute of the present mode will be released Making An Outgoing Call User can use his her Mobile Phone to dial and make an outgoing call Once the user has completed the dialing the below display will show on TFT Calling 0085223456789 Press Z transfer to Mobile User can use the Encoder Volume Knob to adjustthe volume level 7 button The unit will switch back to the previous mode automatically The mute of the previous mode will be released at the same time BLUETOOTH OPERATIONS Call Transfer During the talking mode user can long press the _ button to transfer the audio from the unit back to the Mobile Phone for privacy reason e Afterthe button is pressed the present mode will be muted at the same time user can press the 83 button to release the Mute When making an outgoing call it s not possible to CALL TRANSFER if the call is not being answered yet Its only possible to Transfer the call to Mobile Phone after the call is being answered Depending on different type of Mobile Phone the time need for activating the CALL TRANSFER mode is different Example Nokia Mobile Phone usually takes 3 5 seconds after pressingthe ay buttonforaudio transfer back or forth from Unit to Mobile Phone BLUETOOTH OPERATIONS Bluetooth Audio Oper
22. ons with strong signal can be broadcast Local Seek Off Stations with strong and weak signals can be broadcast Press the BAND button to change between FM bands and AM MW bands Press the LIST button to get into the preset stations list and user can use the Encoder Volume Knob to select which preset station he would listen to and press the Power Mute button to confirm the selection Manual Seek Press and hold 4 9 buttons on front panel to access into the Manual Seek mode L Auto Seek Press and hold 4 buttons on front panel to access into the Auto Seek mode and the unit will auto search for the next radio station MEDIA PLAYER OPERATIONS Disc USB SD Card This unit can play various video audio stored into Disc USB or SD Card on media player You can play commercially available audio CDs and these Discs e Digital Versatile Discs MultiMedias e Video Cds VCDs e Digital Versatile Discs Recordable MultiMedia R e Digital Versatile Discs Rewritable MultiMedia RW e Compact Discs CDs e CD Recordable CD R e CD Rewritable CD RW Please ensure that the disc contains playable content 1 Press amp on the front panel to release the panel 2 Insert a CD with the printed side facing up then close the panel the unit will play starts automatically e Press the BAND PII to pause the music play Press this button again to resume music play e Press the 4 to
23. oud enough First try asking the Listener to increase the volume level on his her mobile phone if it is still not loud enough try to increase your mobile phone s volume level BLUETOOTH OPERATIONS Under Phone conversation the Listener can hear echo feedback A Your unit s speaker volume level is too loud which causes the voice feedback into the microphone This can be corrected by decreasing the volume level Q Under Phone conversation your backgroundis too noisy A May be you are in a noisy environment Try closing the cars window to shield the environment background noise under phone conversation Q If the Mobile Phone already paired with the head unit but after several calls the incoming calls cannot access thru the head unit A The paired Mobile Phone might have lost the Bluetooth connection with the head unit In this case please reconnect the Bluetooth connection to the Mobile Phone Name of Buttons and Their Functions Button ESC O la Bluetooth Handfree Function Under an incoming call mode press this button to end or reject an incoming call Under an incoming call short press this button to answer the call Under the talking mode long press this button to call transfer back to Mobile Phone BLUETOOTH OPERATIONS m Pairing The Bluetooth System Between Mobile Phone amp The Unit e Open your Mobile Phone and switch Bluetooth to on and
24. rmanent damage due to the precise mechanism ofthis unit CAUTION THIS MOBILE MULTIMEDIA PLAYER IS A CLASS I LASER PRODUCT THIS UNIT USES A VISIBLE INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY BE SURE TO OPERATE THE MOBILE MULTIMEDIA PLAYER CORRECTLY AS INSTRUCTED USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN NOTE 1 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE 2 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES 3 THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION DISC AND FORMAT SUPPORTS This unit can play various video audio format which stored into Disc USB or SD card on Media Player The following chart helps you to check if a disc is supported by this unit as well as what functions are available for a given disc type Digital Versatile Discs MultiMedias Video CDs VCDs Digital Versatile Discs Recordable MultiMedia R Digital Versatile Discs Rewritable MultiMedia RW Compact Discs CDs CD Recordable CD R CD Rewritable CD RW Audio Format Playback CD DA and MP3 or WMA digital music file on CD ROM or MultiMedia ROM or USB or Memory C
25. s designed to not allow watching moving video while driving Park your car in a safe place and engage the parking brake before watching moving video NOTE The Video Blocking system under Parking Brake NOT ENGAGED only control this unit s display This system will not affect the Video Output thru the rear RCA Video Output TIPS Be sure to connect Parking Brake connection lead please see more details on Wiring Diagram NOTE If watch moving video from Disc or AV In source but Parking Brake is NOT PROPERLY CONNECTED the video signal will be blocked by the system and the below display will be show on TFT Video Blocked Engage Parking Brake to enjoy video About e Reverse Wire For Back Up Camera System If user connected a back up camera system to this unit when the vehicle is in reverse Gear Back Up mode the front in dash TFT display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in dash TFT Tips Be sure to connect Reverse wire properly please see more details on Wiring Diagram CONNECTING THE SYSTEM ANTENNA ANTENNA EXTENDER JACK BLACK MC IR FRONT LINE OUT
26. s this button to Pause Resume Play the music under PLAY PAUSE media playback mode Press this button to return previous menu Under the tuner BAND mode press this button to change the radio Band When in media playback mode use this button for track or NUMERIC file number direct access and use when function need BUTTONS i numeric selection or input f MultiMedia Press this button and the information displayed on the TFT DISPLAY may vary according to this disc or files type 9 FUNCTION Press this button to enter into the function mode Under tuner mode press this button to Show The List of stored station Under the Media playback mode press this button to list the searching of Tracks or Files on the Media playback mode Under the MultiMedia MP4 mode press this button to list the searching of MultiMedia Root Menu or Files on the playback mode Under the VCD mode press this button to turn On Off thePCB function LIST _ VR Press this button to quick return previous menu or mode e ZOOM When playback the MultiMedia press this button repeatedly to increase the magnification level Under MultiMedia mode press this button while playing a scene recorded with multiple angles to change the angle 55 Press this button to turn On Off the iX BASS booster function ANGLE e OO e MESE Under MultiMe
27. sson may have Power Saving Mode selection when Bluetooth mode is switch on DO NOT Switch ON Power saving Mode when operating with this Head Unit as some abnormal communicational behavior might occur 9 Before the user makes an outgoing call or accepts an incoming call make sure the mobile phone s Bluetooth function is switched ON 10 11 12 13 To ensure the best conversation quality performance talk within 1 meter of the Head Unit If the user wants to Dis connect the Head unit with the Mobile Phone please switch OFF Bluetooth connectivity on the Mobile Phone Some Mobile Phones can support IN BAND RING TONE such as Nokia In such case the Incoming Ringing Tone will be same as the original Ring tone of the Mobile Phone But some Mobile Phones like Sony Ericsson do not support this feature The Ring tone will be using the standard Ring tone of the Head unit When in telephone mode during talking it is highly recommended to set the volume to below 35 in order to achieve the best sound quality If the volume is too high it may create unwanted echo inside the car The unwanted echo may feedback into the microphone Frequency Asking Questions Q A In a conversation ifthe voice output from the car s speakers is notloud enough Try increasing the volume level of the head unitto a suitable sound level During a conversation if the Listener cannot hear my voice l
28. this unit If the BT icon on the TFT is blinking it means the Bluetooth is disconnected with this unit Open your Mobile Phone or Audio device to re connect Bluetooth again 2 Press SOURCE button repeatedly until BT AUDIO appears on the TFT IMPORTANT To listen to Bluetooth audio streaming from the audio device user MUST change the mode to BT AUDIO first Any other mode of this unit is not able to activate the Bluetooth audio streaming A2DP function NOTE In Bluetooth Audio Mode if there is no audio device connected with this unit the TFT will show BT AUDIO The unit will search for an audio device for 20 seconds If there is no device found the screen will display NO DEVICE 3 Once in the BT AUDIO mode user can use the audio device to start playback via Bluetooth wireless with this unit NOTE When you change to Bluetooth Audio mode some audio devices will automatically start playback Some phones may require you to choose Media Player mode on your phone If the auto playback is not supported on the audio device please refer to the instruction manual for the audio device on how to operate music playback via Bluetooth wireless technology BLUETOOTH OPERATIONS m Operating an audio device with this unit AVRCP Audio Video Remote Control Profile This unit can perform the following operations when the connecting Audio device supports AVRCP Audio Video Remote Control Profile only if th
Download Pdf Manuals
Related Search