Utstarcom F3000 Quick Start Guide
Contents
1. Getting to know your F3000 Handset Your handset s keys and navigation Earpiece A Key Function l a Perform the function shown in the soft key eo na on function display area directly above the soft key LCD cecen Make or receive a call access the Dialed Log Switch the phone on and off end a call or return to standby mode LF Soft key function display area Enter numbers and characters Key in or by pressing and holding the key or change the text input method Key in or pause symbol P by pressing and holding the key Us Scroll through menu lists or move the cursor K 1E Earphone socket o Power key I Scroll up or access the Received log Scroll down or access the Missed log Number keypad Access the custom functions menu Access the Profiles menu O Microphone Hew stot Press and hold until the green on off indicator appears disappears How do I These operations need to be performed in standby mode When the left soft key function is Menu the phone is in standby mode To return to standby mode press J Turn Vibration WARNING Prior to placing or receiving calls the WiFi phone must be aan sieris altel ele l connected to a Wireless Access Point and registered with the service Make a call Answer a call End or reject a call Clear a keypad entry Use speed dial Adjust listening volume Access menu options Key in th2. ct Note If there are new configuration and software updates available when the F3000 has successfully connected to an AP it will need to be provisioned Please refer to Section 4 Tul a a 3 Connecting to a Wireless Network Once connected and provisioned when necessary you will see the message Registering via APname When the right soft key function displaying Names in standby mode you are ready to make and receive calls Note If the WiFi phone cannot connect to an AP it will keep searching and wear down your battery Verify open AP availability If not found turn off the phone until you are within range of an Access Point 3 3 Finding and Saving the Access Point APs can be defined and saved automatically using the Net Search feature if APs have broadcast turned on If the desired AP has broadcast turned off The AP can be entered directly through a series of keystrokes on your handset 3 3 1 Using Net Search Note You must be within range of the AP when using Net Search to define it to the F3000 The Net Search feature locates APs and allows you to save the SSIDs Follow these Net Search steps 3 Connecting to a Wireless Network 1 There are two ways to initiate Net Search Press Search while the F3000 is automatically scanning for an AP when the phone is first turned on Use the menus to initiate Net Search Press aie Menu press to scroll to WiFi and press Ga Ok press to sel
3. e phone number and press GL Press f Answer or L Press gt Hangup or or close the flip cover Press 3 Clear Press and hold the speed dial key to display the phone number and then press bh While on a call press Press Menu to access the main menu Press to reach the desired submenu option and then press Cr Ok If there is a number in front of the intended option you can access the option by directly pressing the corresponding number key network See Section 3 Connecting to a Wireless Network for detailed instructions Phonebook options Add a contact Delete a contact Edit a contact Search phonebook Assign a speed dial key Under the Phonebook menu Select Add Entry follow screen prompts Select Delete follow screen prompts Select Search scroll to name press Git Detail press n to reach the intended item press Option select Edit follow screen prompts Select Search key in the first letter s of the name press FOnto scroll Contact name must already be in the phonebook Select Speed Dial select the desired key 2 9 scroll to the desired name and press ee Ok scroll to the desired number and press Ge Ok Messages options Edit a text message Edit an email Read text messages Read emails Call Log options View missed call log View received call log View outgoing call log How do I Under the Mes
4. ect Local Log The phone s status information will be has filtering Try connecting to another AP displayed Is there sufficient signal strength Check the Signal Bars in the top left corner of the display Move closer to AP for better signal strength Fall Full Ful Fa F F P Strong Weak Doc Code 8810026900 0512
5. ect Net Search Available SSIDs are displayed Press to highlight the desired SSID and press Save Press eO to reach the desired AP profile and press Ga Save to save the SSID Press to select the Security Mode option select from Open AP WEP KEY and WPA PSK according to the AP s authentication mode If WEP KEY or WPA PSK is selected the phone will dierectly access the WEP Key Info or WPA PSK Info option Follow the prompts to set the option WEP Key Info Select 64bit or 128bit to specify the encryption method that was used to create the WEP enter the WEP key and press f Ok To set the WEP key authentication method and index select Auth Method and WEP Key Index WPA PSK Info Enter the WPA PSK key and press Cr Ok 3 Connecting to a Wireless Network 3 Connecting to a Wireless Network 3 3 2 Entering SSIDs Directly For alpha entry rapidly press a key to toggle through the letters assigned to that key For example enters a b c A B and C Rapidly press to toggle through the entries Therefore to enter B rapidly press five times If the desired AP has broadcast turned off you can save the AP by entering SSID information directly 1 Press Menu press to scroll to WiFi and press Er Ok press to select WiFi Config press Pause between key presses to enter the next character in o select AP Profile the string For example to enter the string ab press once pause the
6. ill need to be provisioned Please refer to Section 4 Once connected and provisioned when necessary you will see the message Registering via APname When the right soft key function displaying Names in standby mode you are ready to make and receive Calls Note If the WiFi phone cannot connect to an AP it will keep searching and wear down your battery Verify open AP availability If not found turn off the phone until you are within range of an Access Point 3 Connecting to a Wireless Network 3 2 Connecting to Protected or Specific Access Points Before connecting to a protected or specific AP you must define it to the F8000 You can define a maximum of four APs Typically you would define frequently used APs such as that of your home router Defined APs can be open available for use by anyone or protected available for use by authorized users only Protected APs require use of an encryption code for access The F3000 supports WEP and WPA PSK encryption codes If your home wireless router was installed with a WEP or WPA PSK Pre Shared Key use it when defining the SSID to your F3000 If you are defining a corporate AP obtain the WEP or WPA PSK from the AP administrator Once APs are saved the F3000 first tries to connect to one of the defined APs and if none are available it looks for an open AP to use for your call You will see the message Connecting to APname while the phone is attempting to conne
7. in range of a wireless 1 Connect the charger to an AC wall outlet 100 240V access point See the F3000 User Manual for more information 2 Connect the lead from the charger to the charging socket of on all features the phone The battery indicator bar starts to scroll qj gt ia gt gt ij If the phone is off the text Charging is also displayed on the LCD screen Note Before using your F3000 handheld you should have high speed Internet access a wireless router and a voice account set up 3 When the battery indicator bar stops scrolling charging is complete The text Fully Charged is also displayed on the LCD screen if the phone is off Note The phone takes about 3 4 hours to charge and the exact time may vary depending on the circumstances 3 Connecting to a Wireless Network Your F3000 WiFi phone has been preconfigured to provide VoIP phone service via any available open wireless Access Point AP connected to the Internet If you want to use a specific AP or your AP is protected by encrypted access refer to Section 3 2 3 1 Connecting to Open Access Points When you turn on the F3000 it searches for available APs selects the AP with the best signal and attempts to connect to it You will see the message Connecting to APname while the phone is attempting to connect Note If there are new configuration and software updates available when the F3000 has successfully connected to an AP it w
8. n rapidly press twice 2 Press to reach the desired AP profile and press Er Ok Press to select the SSID option If you want to change something previously entered press p Clear to delete the character to the left of the cursor 3 Enter the desired AP s SSID and press f Ok press and hold HA Clear to delete all characters Press 4 Follow steps 3 4 specified in Section 3 3 1 to move the cursor 3 4 Tips for Alphanumeric Entry 4 Auto Provisioning of F3000 WiFi You can enter alpha and numeric values such as a WEP Phone age Key using the F3000 phone keys An indicator A or 12 appears at If there are new configuration and software updates available the upper right corner of the screen once the phone has connected to the Internet successfully via indicates Alpha entry the Access Point the F3000 will need to be provisioned with the indicates numeric entry latest configuration and software This process is automatic and e T E E TTT will take several minutes to compii During this ume Sevara ae ai status messages such as gownoadng decompressing will Be displayed on the phone s display Once complete the phone will l reboot For numeric entry press the desired key once After auto provisioning the phone will use the same process as previously described for connecting to Access Points 5 Troubleshooting 5 Troubleshooting These are the most common problems and solutions that come The phone cannot be s
9. sages submenu Select Text Message select Edit Message Follow screen prompts Select Email select Edit Email Follow screen prompts Select Text Message select Inbox Scroll to the intended message and press M Read Select Email select Inbox Scroll to the intended email and press M Read Under the Call Log submenu Select Missed Log Press to browse Select Received Log Press to browse Select Dialed Log Press to browse Contents Overview Charge the Battery Connecting to a Wireless Network 3 1 Connecting to Open Access Points 3 2 Connecting to Protected or Specific Access 3 3 Finding and Saving the Access Point 3 3 1 Using Net Search 3 3 2 Entering SSIDs Directly 3 4 Tips for Alphanumeric Entry 4 Auto Provisioning of F3000 WiFi 3 1 Overview 2 Charge the Battery The UTStarcom F3000 Handheld is a wireless Voice over IP When the battery power is low and needs recharging the battery VoIP telephone that when coupled with VoIP phone service indicator _ will flash continuously and the phone will sound a combines the benefits of Internet telephone service with low battery alarm reminding you that the battery is running low mobility This guide covers how to configure and use your F3000 and the phone will be switched off automatically To charge the to make VoIP phone calls via the service network You can make battery follow the steps below and receive calls as long as you are with
10. witched on up when starting to use the F3000 WiFi phone If you are having l Press J7 and make sure you hold it down for more than 2 trouble placing a phone call go through this checklist until your T problem is solved If it still doesn t switch on check your battery If necessary cannot make a phone call charge the battery Is the phone connected to an AP and registered with the service network How do know what my IP address and Mac Address is Access the Network Information option Press Menu If so you will see the right soft key function displaying press kO to scroll to WiFi and press lt f Ok press 3 to Meee ea MOE Ay nE ee ee ce select Network Parameter Press to select Network and press L Information If the phone hasn t connected to an AP refer to Section 3 1 gt Net Search didn t find my AP Connecting to Open Access Points and Section 3 2 Connecting to Protected or Specific Access Points for advice Make sure SSID broadcasting is enabled on your AP lf the phone has connected to an AP but hasn t registered HELPFUL HINT Your WiFi phone s Local Log function provides the with the service Network the following message will appear phone s status information which may help analyze the problem No Service Try Another AP This may indicate connection Press ee Menu press to scroll to Misc and press Ge Ok to an AP for which there is no Internet or possibly an AP that Press to sel
Download Pdf Manuals
Related Search