User Manual - B&H Photo Video Digital Cameras, Photography
Contents
1. e 10 straight Power requirement Two 377 SR6265W button cell batteries Battery life Approx 100 hours continual use Size 0 5 x 7 6 1 3 x 19 3 cm Weight 1 6 02 45 9 Ten Year Limited Warranty Senal provides a limited warranty to the original purchaser that this product is free from defects in materials and workmanship under normal consumer use for a period of ten 10 years from the original purchase date or thirty 30 days after replacement whichever occurs later Senal s responsibility with respect to this limited warranty shall be limited solely to repair or replacement at Senal s discretion of any product that fails during normal consumer use Inoperability of the product or part s shall be determined by Senal If the product has been discontinued we reserve the right to replace it with a model of equivalent quality and function To obtain warranty coverage contact Senal to obtain a return merchandise authorization RMA number and return the defective product to Senal along with the RMA number and proof of purchase Shipment of the defective product is at the purchaser s own risk This warranty does not cover damage or defect caused by misuse neglect accident alteration abuse improper installation or maintenance EXCEPT AS PROVIDED HEREIN SENAL MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRAN2. S 77 and Turning It On To mount the microphone to your camera make sure the MS 77 is turned off and follow these steps 1 Rotate both locking wheels on the shoe mount adapter clockwise making sure you have enough room to screw the shock mount onto the threaded post Screw the shock mount all the way onto the threaded post of the shoe mount adapter Rotate the upper locking knob counterclockwise until secure Rotate lower locking wheel on shoe mount adapter counterclockwise to loosen it Slide the shoe mount adapter all the way into your camera s shoe mount Rotate the lower locking wheel clockwise until secure Mounting the MS 77 and Turning It On Wa 7 Insert the microphone through the shock mount suspenders ensuring that the suspenders grip the base of the microphone Note Make sure the microphone barrel is not in
3. TY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty provides you with specific legal rights and you may also have additional rights that vary from state to state Copyright 2013 Gradus Group All other trademarks are the property of their respective owners SENAL All photos are for illustrative purposes only A Gradus Group Brand Warranty www senalsound com
4. USER S GUIDE Table of Contents Introduction 3 OverVvieW nennen 4 Precautionsau ersssenen 5 Installing Batteries 6 Mounting the MS 77 and Turning It ON 7 9 Using the Gain Boost 10 The Windscreen 10 Replacing the Shock Mount SuspendersS 11 Troubleshooting 12 VIDEO MINI SHOTGUN Specifications nee 13 MICROPHONE KIT WarTaY cocinas 14 Thank you for choosing Senal The Senal MS 77 DSLR Video Mini Shotgun Microphone Kit is designed for recording live audio directly into your DSLR or camcorder The MS 77 s hypercardioid polar pattern and shotgun design optimize the microphone to focus on the subject while rejecting off axis sound Ideal for run and gun productions like recording interviews and events indoors and in the field the MS 77 s shock mount attaches directly to a boom pole and the metal shoe mount adapter attaches to your camera s shoe mount The MS 77 comes with two cables for on camera and boom pole mounting and plugs into the camera s audio input jack to deliver natural professional quality sound Among the benefits you ll enjoy a Convenient pen sized microphone a Hypercardioid polar pattern a Adjustable gain a Threaded audio cables for on camera and boom mounting a Included shock mount Metal shoe mount adapter with 1 4 20 threaded socket a Approximately 100 hours battery life Introduction lt s ee Overview Mic
5. ble into your audio recorder s audio input jack To turn the microphone on slide the power switch to the ON position Mounting the MS 77 and Turning It On Using the Gain Boost The gain boost switch increases the microphone s gain and can be useful for picking up low level or distant sounds in a quiet environment The gain boost switch has three stages O dB 10 dB and 20 db To boost the microphone s gain by ten decibels slide the gain boost switch so it rests under the 10 dB marking To boost the microphone s gain by twenty decibels slide the gain boost switch so it rests under the 20 dB marking To turn off the gain boost slide the switch so it rests under the O dB marking The Windscreen The MS 77 comes with a foam windscreen that helps reduce wind noise To fit the windscreen onto the microphone gently push it onto the microphone barrel Make sure that the windscreen covers all the ports on the sides of the microphone barrel Using the Gain Boost The Windscreen Replacing the Shock Mount Suspenders The MS 77 s shock mount isolates the microphone from your camera or boom pole This helps prevent the microphone from picking up vibrations in the camera or boom which can cause disruptive and unwanted noise in your recording The MS 77 comes with replacement suspenders for the shock mount To replace the suspenders follow these steps GO 1 Remove the old suspenders from the shock mount and set them as
6. contact with the shock mount suspenders as this may produce disruptive noise when recording Rotate the microphone so the power and gain switches are fully accessible through the shock mount s top cutout 8 Screw the threaded end of the included 7 audio cable into the MS 77 s audio connection 9 Insert the 3 5 mm end of the cable into your camera s audio input jack Tip You can adjust the angle of the shock mount to tilt the microphone up or down 7 8 tir To mount the microphone to a boom pole make sure the MS 77 is turned off and follow these steps 1 Match the threaded post on the end of the boom pole with the threaded socket in the MS 77 s shock mount 2 Screw the boom pole into the threaded socket until secure 3 Insert the microphone into the shock mount ensuring that the suspenders grip the base of the microphone Note Make sure the microphone barrel is not in contact with the shock mount suspenders as this may produce disruptive noise when recording 4 Screw the threaded end of the included 10 audio cable into the MS 77 s audio connection 5 Insert the 3 5 mm end of the ca
7. ide 2 Hook a new suspender around one of the tabs and stretch the sus pender across the opening of the shock mount to hook it around the opposite tab 3 Repeat step 2 for the second suspender The two suspenders should form an X shape across the opening of the shock mount Replacing the Shock Mount Suspenders Troubleshooting Problem Solution The shock mount is stuck in the Make sure the shock mount s locking wheel is fully loosened camera s shoe mount The microphone will not turn on Make sure that fresh batteries are installed and that they are in the proper orientation lt x ake sure the base of the microphone is screwed on securely The sound is distorted or there is Make sure the microphone s audio connection cable is fully noise in the recording plugged into your camera s audio input jack Turn off the gain boost on the microphone Make sure that the microphone is properly mounted in the shock mount and that the barrel is not touching the suspenders fae Boe owe EEE AAA A A aera aes Troubleshooting Specifications Specifications Transducer type Back electret condenser Pattern Hypercardioid Frequency response 30 Hz to 18 kHz Impedance 250 0 30 1 kHz Sensitivity 42 dB 3 dB O dB 1 V Pa O 1 kHz Audio connection 3 5 mm 1 8 stereo Cable Detachable 7 2 straight 3 coiled 2 straight
8. rophone Power switch 6 ports Gain switch s Er c 1008 U 2098 Suspenders Tabs Locking knob f Audio Also Included 1 4 20 threaded socket connection 7 coiled cable Threaded post 10 straight cable lt Locking wheels Foam windscreen Replacement shock mount suspenders Mounting foot User manual l aoo ee ea BEE EEE IE TEE uaa a EAR Overview Precautions Z a Please read and follow these instructions and keep this manual in a safe place Keep this product away from water and flammable gases or liquids Donot attempt to disassemble or repair this product yourself Handle this product with care a Clean this product with only a soft dry cloth a Make sure that this product is intact and that there are no missing parts a All photos are for illustrative purposes only Precautions ad Installing Batteries The MS 77 runs on two 377 button cell batteries To install batteries make sure the MS 77 is turned off and follow these steps 1 Unscrew the base of the microphone to access the battery compartment 2 Insert batteries in the orientation indicated by the illustration 3 Close the battery compartment by screwing the base back on the microphone DE pm Important DN Replace both batteries at the same time Do not mix battery types or brands or use old and new batteries together Installing Batteries Mounting the M
Download Pdf Manuals
Related Search