Clarion CZ209 Car Radio OWNER`S MANUAL Operating
Contents
1. TP and TA appear in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast When a traffic announcement broadcast starts TRA INFO appears in the display If you press the TA button while a traffic announcement broadcast is being received the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode Cancelling the TA standby mode As TP and TA appears in the display press the TA button The TA in the display goes off and the TA standby mode is cancelled x If TP is not appeared pressing the TA button searches for a TP station Searching for a TP station When TP is not appeared if you press the TA button TA appears in the display and the unit automatically receives a TP station Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory If the number of TP can be received less than 6 broadcast stations already stored in memory and left without being overwritten As TA appears in the display press and hold the EN button 2 sec The TP stations with the good reception sensitivity are stored into preset memory x Even if you select FM1 or FM2 a TP station is stored in memory for FM3 PTY Programme Type This function enables you to listen to a broadcast of the selected programme type even if the unit is on2. DIMMER 3 1 Turn the ROTARY knob to select ON or OFP Setting car speaker output for cell phones When the AUX input jack is used to connect an AUX BLUETOOTH BB BLT373 sold separately The factory default setting is RIGHT x To output the telephone calls set cell phone interrupt to ON 2 1 Select TEL SP 3 1 Turn the ROTARY knob to select RIGHT or LEFT RIGHT Telephone calls can be heard on the front right speaker connected to this unit LEFT Telephone calls can be heard on the front left speaker connected to this unit Downloaded from Caradio Manual com Manuals Cell phone interrupt setting If you connect this unit and your cell phone with an optional cable you can listen to your calls on your car speakers When the AUX input jack is used to connect an AUX BLUETOOTH BB BLT373 sold separately The factory default setting is OFF 2 1 Select TEL SW 3 1 Turn the ROTARY knob to select setting When turning the ROTARY knob the setting changes as follows OFF lt gt ON lt gt MUTE OFF This unit continues normal operation even when the cell phone is used e ON Telephone calls can be heard from the speakers connected to the unit x When listening to calls on your car speakers turn the ROTARY knob to adjust the volume MUTE The sound from this unit is muted during telephone calls
3. asterisks 19 CZ209E CZ209ER CZ209EG 7 TROUBLESHOOTING Problem Cause Measure Power does not turn on No sound Fuse is blown Replace with a fuse of the same amperage If the fuse blows again consult your dealer Incorrect wiring Consult your dealer No sound when operating the unit with amplifiers or power antenna attached Power antenna lead is short circuited or excessive current is required for remotely powering on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for possible short circuits using an ohm meter Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote power on voltage excessive current required Nothing happens when buttons are pressed Display is not accurate Microprocessor malfunction due to noise etc Turn off power then press the RELEASE button and remove the DCP Use a thin rod to hold ii button depressed 2 sec If the reset button is pressed when a disc is loaded please eject the disc and load it once again before attempting to play it Reset button DOP or main unit connectors are dirty Wipe dirt off with a soft cloth dampened with cleaning alcohol No sound The speaker protectio
4. is not guaranteed with all USB memory devices Devices compatible with USB Mass Storage Class can be used by connecting to the host device without special drivers or application software Consult the manufacturer of your USB memory device for information regarding whether it is supported by USB Mass Storage Class standards Audio files playable on this unit are limited to MP3 WMA files For details see MP3 WMA page 12 Copy protected WMA files cannot be played on this unit To prevent accidental loss of data always back up important data on your computer Connections to a computer or through a USB hub device are not supported e When a USB memory device is composed of two or more drives only one of the drives will be detected e USB memory devices with security functions are not supported The order in which tracks are recorded may differ depending on the USB memory device the actual playback order may not be the same as that indicated on your computer s display A CAUTION e Insert and remove a USB memory device only when the device is not being accessed Connecting disconnecting the device at the following times may result in the loss of data s If the USB memory device is removed or power is disconnected during writing to the device When the device is subject to static electricity or electric noise s Do not leave a USB memory device unattended in an automobile Exposure to dir
5. a function mode other than radio Some countries do not yet have PTY broadcast x In the TA standby mode a TP station has priority over a PTY broadcast station The factory default setting is OFF 1 Press and hold the DISP button 1 sec to switch to the RDS adjustment selection display 2 Press Ida or PPI to select PTY 3 Turn the ROTARY knob to select ON or OFP ON PTY appears in the display and PTY standby mode is enabled When the selected PTY broadcast starts the PTY item name appears in the display e OFF PTY turns off in the display and PTY standby mode is cancelled 4 Press the DISP button to return to the previous mode Cancelling a PTY interrupt broadcast Press the TA button during the PTY interrupt broadcast the PTY interrupt is cancelled and the unit returns to PTY standby mode Selecting PTY 1 Press and hold the DISP button 1 sec to switch to the RDS adjustment selection display 2 Press I lt or gt P to select PTY SEL Press the ENT button 4 Press any of the DIRECT buttons Alternatively turn the ROTARY knob to select the desired PTY 5 Press the DISP button to return to the previous mode x 6 types of PTY are stored for the DIRECT buttons The PTY select mode is cancelled automatically 7 seconds after a PTY is selected be PTY seek 1 Press and hold the DISP button 1 sec to switch to t
6. button 1 sec to switch to the RDS adjustment selection display 2 Press 4 or gt P to select REG 3 Turn the ROTARY knob to select ON or OFF ON REG appears in the display and REG function will be enabled OFF REG turns off in the display and REG function will be disabled 4 Press the DISP button to return to the previous mode Manually tuning a regional station in the same network 1 This function is valid when the AF function is ON and the REG function is OFF Note e This function can be used when a regional broadcast of the same network is received 2 Press any of the DIRECT buttons to call out the regional station 3 If the reception condition of the called out station is bad press same DIRECT button The unit receives a local station on same network TA Traffic Announcement In the TA standby mode when a traffic announcement broadcast starts the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it Traffic programme TP automatic tuning is also available This function can only be used when TP appears in the display When TP appears this means that the RDS broadcast station being received has traffic announcement programmes wnloaded from Caradio Manual com Manuals e Setting the TA standby mode If you press the TA button when only TP appears in the display
7. lt G 0 gt lt gt B lt F 60 gt lt gt Q 1 3 3 Turn the ROTARY knob to adjust values for gain F center frequency and Q curve B lt G 0 gt The factory default setting is 0 Adjustment range 7 to 7 B lt F 60 gt The factory default setting is 60 Adjustment range 60 80 100 200 Q1 The factory default setting is 1 Adjustment range 1 1 25 1 5 2 3 4 Press the ENT button to return to the gt previous mode Adjusting the treble This adjustment is supported only when Z Enhancer Plus is set to CUSTOM 2 1 Select TREBLE 3 1 Press the NI button 3 2 Press M44 or PPI to change and select settings as follows T lt G 0 gt gt T lt F 10K gt 3 3 Turn the ROTARY knob to adjust values for gain and F center frequency T lt G 0 gt The factory default setting is 0 Adjustment range 7 to 7 T lt F 10K gt The factory default setting is 10K Adjustment range 10K 12 5K 15K 17 5K 3 4 Press the ENT button to return to the S KH previous mode Adjusting the balance 2 1 Select BALANCE 3 1 Turn the ROTARY knob to adjust balance between right and left speakers The factory default setting is CENTER Adjustment range RIGHT12 to LEFT 12 Adjusting the fader 2 1 Select FADER 3 1 Turn the ROTARY knob to adjust balance between front and rear speakers The factory defaul
8. the gt I button Subfolders may be displayed depending on the category In this case you can use the ROTARY knob to switch between subfolders and use the PPI button to enter the next subfolder layer Press and hold the DISP button 1 sec Turn the ROTARY knob to select the desired letter to search Press the DISP button to perform search During search press the DISP button to cancel search Selecting category using preset memory 1 Press the BND button to select the iPod menu mode The category can be set as follows in the DIRECT 1 6 buttons 1 PLAYLIST 2 ARTIST 3 ALBUM 4 SONG 5 GENRE 6 COMPOSER Press the desired DIRECT 1 6 button to select the category Subfolders may be displayed depending on the category In this case use the ROTARY knob to switch between subfolders and use the PP button to select the desired subfolder When the track name display is showing press the PP button Playback will begin from the first track in the selected category and the iPod menu mode will be canceled Use the ROTARY knob to select a track within a category About title display This unit supports the display of title information obtained from a connected iPod Character code information is UTF 8 displayable characters include English alphanumerics some symbols and some umlaut characters Unsupported characters will be replaced by
9. 9EG 9 RDS Operations RDS Radio Data System This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data When using the RDS function always set the radio to FM mode AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception The factory default setting is ON 1 Press and hold the DISP button 1 sec to switch to the RDS adjustment selection display 2 Press Ida or gt P to select AF 3 Turn the ROTARY knob to select ON or OFF ON AF appears in the display and AF function will be enabled OFF AF turns off in the display and AF function will be disabled 4 Press the DISP button to return to the previous mode x If the reception of the current broadcast station deteriorates SEARCH appears in the display and radio searches for the same programme on another frequency REG Regional programme function When the REG function is ON the optimum regional station can be received When this function is OFF if the regional station area switches as you drive a regional station for that region is received The factory default setting is OFF Notes e This function is disabled when a national station such as BBC R2 is being received e The REG function ON OFF setting is valid when the AF function is ON 1 Press and hold the DISP
10. Basic Operations A CAUTION Be sure to lower the volume before switching off the unit power or car s ignition key The unit remembers its last volume setting Turning power on off 1 Press the SRC button to turn on power 2 Press and hold the SRC button 1 sec to turn off power Selecting modes 1 Press the SRC button to change operation mode 2 Each time the SRC button is pressed the operation mode changes as follows Radio gt CD MP3 WMA gt USB iPod gt AUX gt Radio An iPod can be connected via a USB cable Adjusting the volume 1 Turn the ROTARY knob clockwise to increase volume turn counterclockwise to decrease volume Volume range is 0 minimum to 33 maximum Switching the display Press the DISP button to select desired display Sound Adjustment Sound effects and tone can be adjusted as desired To change sound settings 1 Press the SOUND button to switch to the sound adjustment display The factory default sound setting is Z EHCR Press Ik or gt P I to select the sound adjustment mode Each time I or gt I is pressed the sound adjustment mode changes as follows Z EHCR gt BASS TREBLE lt gt BALANCE lt FADER lt gt NF VOL x When ENT is flashing in the display press the FM button to adjust the setting value The sound adjustment mode is displayed for 2 seconds before showin
11. Clarion Owner s manual Mode d emploi Bedienungsanleitung Istruzioni per Puso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instru es CZ209E CZ209ER CZ209EG CD USB MP3 WMA RECEIVER AUTORADIO CD USB MP3 WMA CD USB MP3 WMA RECEIVER SINTOLETTORE CD USB MP3 WMA CD USB MP3 WMA RADIO COMBINATIE RECEPTOR CD USB MP3 WMA CD USB MP3 WMA RADIO RECEPTOR CD USB MP3 WMA Downloaded from Caradio Manual com Manuals CAUTIONS This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read this Owner s Manual carefully and keep this manual for your future reference In case of any trouble with this player please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE ADVARSEL Denne merking er anbragt udvendigt pa apparatet og indikerer at apparatet arbejder med laserstraler af klasse 1 hvilket betyder at der anvendes laserstraler af svageste klasse og at man ikke pa apparatets yderside kan blive udsat for utilladelig kraftig straling APPARATET BOR KUN ABNES AF FAGFOLK MED S ERLIGT KENDSKAB TIL APPARATER MED LASERSTRALER Indvendigt i apparatet er anbragt den her gengivne advarselsmeeknin
12. Note e If connecting a hands free kit make sure the setting is ON to receive telephone audio through the system AUX function An external input jack AUX is provided on the front panel to allow playback of sound and music from external devices Selecting AUX IN sensitivity Make the following settings to adjust sensitivity when the sound from an external device is difficult to hear even after adjusting the volume The factory default setting is MID 1 Press and hold the DISP button 1 sec 2 Select AUX SENS 3 Turn the ROTARY knob to select HIGH MID or LOW Note e When AUX mode is selected AUX IN sensitivity can be set CZ209E CZ209ER CZ209EG 1 5 6 ACCESSORIES USB Operations USB memory device operation Note e The following operations are the same as CD mode Titles up to 64 bytes can be displayed in USB mode x Pause x Track selection Fast forward fast reverse Scan play x Repeat play Random play x Folder selection See CD MP3 WMA Operations page 12 14 for details About USB memory USB stands for Universal Serial Bus and refers to an external bus standard supporting data transfer rates of 12 Mbps This unit is compatible with USB 1 1 2 0 with maximum data transfer rates of 12 Mbps USB memory devices playable via the unit s USB cable are limited to those recognized as USB mass storage class devices operation
13. ect sunlight or high temperatures may cause deformation or other malfunction of the USB memory device Connecting a USB memory device 1 Connect the USB memory device to the USB cable Press the SRC button to switch the source to the device Playback will begin from the first file recorded on the device Always insert the device fully into the connector Incomplete connections may cause the device not to be recognized Depending on the number of tracks recorded some of time may be required until all tracks are read into the unit To listen to tracks on a connected USB memory device 1 Press the SRC button to switch sources When USB memory device is selected playback will begin from the location at which playback was previously stopped When a USB memory device is disconnected and reconnected playback will begin from the previous track of the USB memory device wnloaded from Caradio Manual com Manuals To stop play 1 Press the SRC button and switch the source to something other than the USB memory device 2 Remove the USB memory device from the USB cable A CAUTION Do not remove the USB memory device while USB mode is selected as it may result in loss of or damage to data on the USB memory device Always backup and save important data on your computer Downloaded from Caradio Manual com Manuals iPod Operations This section describes operations when connected to a
14. elled and the display returns to the previous mode Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM can be used to store broadcast stations in memory Press the corresponding DIRECT button to automatically recall the stored frequency Manual memory 1 Use seek tuning or manual tuning to select the desired station 2 Press and hold one of the DIRECT buttons 2 sec to store the current station in preset memory Auto store The auto store function stores up to 6 stations automatically tuned in sequential order If 6 stations cannot be found any previously stored station remains in its memory position 1 Press the BND button and select the desired band FM AM MW LW 2 Press and hold the N button 2 sec The stations with good reception are stored automatically to the preset channels x If auto store is performed in the FM bands the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations Preset scan Preset scan sequentially receives stations stored in preset memory This function is useful when searching for a station stored in the memory 1 Press the ENT button KH 2 When the desired station is received press the Ey button again to continue receiving that station Note e Do not press and hold the FM button 2 sec or the auto store function will begin and the unit will begin storing stations CZ209E CZ209ER CZ20
15. eseesseeseeseesseesseeseesenseeeseeseneseneees 6 5 OPERATIONS i sccicescatccetseccccsttestedecenceecet etal ces seeccedsicecccatcvdessin sccdocsssedces snadccenttzedeutcsteteiesccdecseenzcntecioaess 7 Basic Operations FRAGIO e ol Teea S PT E T DS Operations AAEE scdsadacanasadddsasscdssdaegiisad Head acddadacanasbadsarsecsadacs CD MP3 WMA Operations a Operations Common to Each Mode sss ss sese sese eers eee 14 G ACCESSORIES ices ccdecccccs EL reaa eaa AOO eRe ceavttescendeccccceaesaecouseevecersceceussucetesssceeeseueseuscesseesceiie 16 USB Operations iPod Operations T TROUBLESHOOTIN Girgenciscccssccsszasacenessesscaccescepecczcessecaccevacececsceiues ctigscsacescutastciesiuescieacveberteticaeeaetioxe 20 8 ERROR DISPLAYS el 9 SPECIFICATIONS SEE EEN Eee ENG 22 Downloaded from Caradio Manual com Manuals CZ209E CZ209ER CZ209EG 3 1 FEATURES Ror Plays Made for US weg RDS e USB Direct Connection for iPod e Front panel auxiliary input amp 4ch RCA output e MP3 WMA compatible with ID3 TAG display 2 PRECAUTIONS This unit is applicable for on road 4 wheel Handling Compact Discs vehicle purpose only Use for tractor fork truck e Compared to ordinary music CDs CD R and bulldozer off road vehicle 2 or 3 wheel motor CD RW discs are easily affected by high bicycle marine boat or other special purpose temperatures and humidity potentially vehicle is not appropriate making them
16. g som advarer imod at foretage sadanne indgreb i apparatet at man kan komme til at udsazette sig for laserstraling Apparaten innehaller laserkomponenten som avger laserstralning verstigande gr nsen f r laserklass 1 Suojakoteloa si saa avata Laite sis lt laserdiodin joka l hett n kym t nt silmille vaarallista lasersateilya 12V GROUND iw 153 279kHz 531 1602kHz C FM UKW FM UKW 87 5 108MHz erre e CLASS 1 LASER PRODUCT This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from MSLGP 276 SERIAL No CF Clarion Co Ltd PEL MADE IN ownloaded from Caradio Manual com Manuals Thank you for purchasing this Clarion product Please fully read this owner s manual before operating this equipment Check the contents of the enclosed warranty card and store it in a safe place with this manual Contents 17 FEATURE SEE DEER dsc cece E aa ES ned 4 2 PRECAUTIONS ziczecttciveccsecttcccncsstteces secsctedeeccnscedecdceertecsneasitecesdes shascdrccnscedecdencdacesnesstindestet scesuersunniels 4 3 CONTROLS ici sccecezssciceccctcticsdesccseie sccades etegcus seeccedet cettestceaceats siedecsvuczoessaedecsstectecoucscdeais stezeesteceedeeabecess 5 Names of the Buttons and Their Main Functions sss eee ee ee ee ee eee eee 5 4 DCP DETACHABLE CONTROL PANE L ccccsssseesssseesesseneeeesen
17. g the sound setting Turn the ROTARY knob to adjust the selected audio mode After completing settings press the SOUND button to return to the previous mode Setting the Z Enhancer Plus This unit has 4 sound tone effects stored in memory Select the effect you prefer The factory default setting is OFF 2 1 Select Z EHCR 3 1 When you turn the ROTARY knob the tone effect changes as follows OFF B BOOST gt IMPACT lt gt EXCITE gt CUSTOM OFF No sound effect B BOOST Enhanced bass IMPACT Enhanced bass and treble EXCITE Enhanced bass mid and treble CUSTOM User customized When set to B BOOST IMPACT EXCITE 3 2 Press the Ey button 3 3 Turn the ROTARY knob to adjust the setting Setting range 3 to 3 The factory default setting is 0 Downloaded from Caradio Manual com Manuals CZ209E CZ209ER CZ209EG 7 3 4 Press the Fj button to return to the previous mode When set to CUSTOM 3 2 Press and hold the FM button 1 sec Bass treble characteristics become flat and FLAT is show in the display 3 3 Turn the ROTARY knob to change to the OFF mode Adjusting the bass This adjustment is supported only when Z Enhancer Plus is set to CUSTOM 2 1 Select BASS 3 1 Press the FM button 3 2 Press Ilda or PPI to change and select settings as follows B
18. han 15 A Speaker Impedance 4 Q 4 to 8 Q allowable Weight Main unit 1 2 kg Dimensions Main unit 178 W X 50 H X 155 D mm Note e Specifications and design are subject to change without notice for further improvement wnloaded from Caradio Manual com Manuals R beslag Paa Caron TEL 49 6105 977 0 FAX 49 6105 977 399 CE DECLARATION of CONFORMITY address declare under our sole responsibility that the product CAR RADIO with CD PLAYER name type or model possibly sources and numbers of items to which this declaration relates is in conformity with the following standard s or other normative document s title and or number and date of issue of the standard s or other normative document s according to paragraph 3 2 9 of Annex I meets the limits defined in paragraph 6 5 6 6 6 8 and 6 9 of Annex I supplier s comment Morfelden Walldorf GERMANY Akihiko Nadabe Place and date of issue name and signature or equivalent marking of authorized person RefNo 08ROC001C D F DQC08A130 Clarion Co Ltd All Rights Reserved Copyright 2008 Clarion Co Ltd Printed in China Imprim en Chine Gedruckt in China Stampato in Cina PE 3158E 2008 12 Gedrukt in China Impreso en China Tryckt i Kina Impresso na China 280 8692 00 Downloaded from Caradio Manual com Manuals
19. he RDS adjustment selection display 2 Press I or gt P to select PTY SEL Press the ENT button KH 4 Press the KEJ button to search fora PTY broadcast in the direction of higher frequencies press the I button to search in the direction of lower frequencies x If no station with the selected PTY broadcast can be received the unit returns to the PTY select mode w Downloaded from Caradio Manual com Manuals 11 CZ209E CZ209ER CZ209EG PTY preset memory 1 Press and hold the DISP button 1 sec to switch to the RDS adjustment selection display 2 Press Iaa or PPI to select PTY SEL Press the FM button 4 Turn the ROTARY knob to select the desired PTY 29 types of PTY can be selected 5 If you press and hold any of the DIRECT buttons 2 sec the selected PTY is stored into that preset channel memory w Emergency broadcast If an emergency broadcast is received all the function mode operations are stopped ALARM appears in the display and the emergency broadcast can be heard Cancelling an emergency broadcast If you press the TA button emergency broadcast reception is cancelled Switching the PTY display language You can select one of 4 languages English German Swedish or French for the PTY in the display The factory default setting is ENGLISH 1 Press and hold the DISP button 1 sec to switch to the adjustment selection display 2 Pre
20. iPod menu mode e The Random function set on the iPod remains the same after connecting disconnecting of the iPod e The Repeat function on the iPod will be changed when the iPod is connected disconnected to this unit Repeat play Play back one track repeatedly 1 Press the RPT button Random play Play all albums within a selected category in random order Corresponds to Shuffle Albums command on iPod 1 Press the RDM button All random play Play all tracks within a selected category in random order Corresponds to Shuffle Songs command on iPod 1 Press and hold the RDM button 1 sec To cancel play 1 Press the same play button again Notes e If the repeat play mode is canceled once all tracks within a selected category are played playback will begin from the first track in the selected category e If ACC is switched off when playing the last track within a selected category in Random mode playback will begin from a different track once ACC is turned back on e Though the default setting of an iPod is All Repeat this indication is not displayed on the mode status e When performing operations using simple control mode do not set the repeat off on the iPod wnloaded from Caradio Manual com Manuals Selecting category from the iPod menu 1 Press the BND button to select the iPod menu mode The iPod menu categories will be displayed Notes Repea
21. ired value x When ENT is flashing in the display press the FM button to adjust setting value After completing settings press the DISP button to return to the previous mode e Displaying the settings You can see the state of current settings at any operation mode 2 1 Select SETTINGS 3 1 Turn the ROTARY knob to display the current settings x When the setting is selected the current state will be displayed after 1 second Example After 1 second Turning the screen saver on off This unit has a screen saver function in which various patterns and random characters can be displayed on the operation status indication area This function can be turned on off If a button is pressed while the screen saver is on the corresponding operation display is shown for about 30 seconds and then the display returns to the screen saver The factory default setting is ON 2 1 Select SCRN SVR 3 1 Turn the ROTARY knob to select ON or OFF wnloaded from Caradio Manual com Manuals Setting title scroll method Set how to scroll in CD TEXT and MP3 WMA titles The factory default setting is ON 2 1 Select SCROLL 3 1 Turn the ROTARY knob to select ON or OFP e ON Scroll automatically e OFF Scroll 1 time only e Setting dimmer control Dimmer control can be set ON or OFF The factory default setting is ON 2 1 Select
22. isplayed e SO8859 1 ASCII S JIS characters can be displayed in Tags UNKNOW characters can be turned into 1S08859 1 characters e Titles up to 32 bytes can be displayed in CD MP3 WMA mode Selecting a track Track advance 1 Press the gt Pl button to move to the beginning of the next track 2 Each time the Pl button is pressed the track advances to the beginning of the next track Track back 1 Press the 4 button to return to the beginning of the current track 2 Press the Ilda button twice to return to the beginning of the previous track Fast forward fast reverse Fast forward 1 Press and hold the gt I button 1 sec Fast reverse 1 Press and hold the I button 1 sec x For MP3 WMA discs some time is required until to initiate movement between tracks Also some error may occur in the playing time Downloaded from Caradio Manual com Manuals 13 CZ209E CZ209ER CZ209EG Folder select Select a folder containing MP3 WMA files and begins playing the first track in the folder 1 Press UP or DN Press the UP button to move to the next folder Press the DN button to move to the previous folder 2 To select a track press k44 or gt P Other play modes Scan play This function locates and plays the first 10 seconds of all tracks recorded on a disc 1 Press the SCN button for scan play Folder scan play This function locates and plays the first 10 sec
23. m repeat play while in CD MP3 WMA USB iPod mode SCN button e Perform scan play in CD MP3 WMA USB mode DISP button e Switch display mode ROTARY knob e Rotate to adjust the volume TA button Press to set the TA Traffic Announcement standby mode SRC button e Turn the power on off 4 gt gt I buttons e Commence fast forward fast reverse mode 4 EJECT button e Press to eject disc CZ209E CZ209ER CZ209EG 5 4 DCP DETACHABLE CONTROL PANEL Removing the DCP A CAUTION 1 Press and hold the SRC button 1 sec to switch off power After removal be careful not to drop the DCP or subject it to strong impacts to prevent damage Once the RELEASE button is pressed and the DCP is unlocked car vibrations can cause the DCP to fall The connector for the main unit and DCP is extremely important Be careful not to damage it by pressing with fingernails or sharp objects 2 Press the RELEASE button pa RELEASE button DCP Rear Panel Main Unit Front DCP is unlocked 3 Remove DCP DCP connector Main unit connector Note e If the DCP is dirty wipe off with a soft dry cloth only Attaching the DCP 1 Insert the right end of DCP into main unit 2 Press left end of DCP into main unit ownloaded from Caradio Manual com Manuals 5 OPERATIONS Note e Refer to the diagrams in 3 CONTROLS page 5 when reading this chapter
24. n Apple iPod via the USB cable Notes e See the iPod Owner s Manual for details regarding operations e The unit will not operate or may operate improperly with unsupported versions e For a list of Apple iPod models compatible with this unit please contact your Clarion dealer or www clarion com e Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards iPod and iTunes are trademarks of Apple Inc registered in the U S and other countries Connecting an iPod When an iPod is connected to the USB cable the Shuffle setting on the iPod will become as follows e Shuffle Albums play gt Random play e Shuffle Songs play gt All random play The iPod has two modes the Play mode and the iPod menu mode for selecting tracks Switch between these modes by pressing the BND button Note e To connect an iPod please use the USB cable that came with your iPod CZ209E CZ209ER CZ209EG 1 7 Select iPod mode 1 Press the SRC button Playback will begin from the last file that was played on the iPod Notes e The following operations in Play mode operate the same as in CD mode Track selection 4 gt gt I Fast forward fast reverse K4 g
25. n circuit is operating 1 Turn down sound volume Function can also be restored by turning power off and on again Speaker volume is reduced automatically when the speaker protection circuit operates 2 If the sound is still muted consult your dealer CD MP3 WMA No sound MP3 WMA files are absent on disc Write MP3 WMA files onto disc properly Files are not recognized as MP3 WMA files Use properly encoded MP3 WMA files File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Sound skips or is noisy CD is dirty Clean the CD with a soft cloth CD is heavily scratched warped Replace with a CD without scratches Sound cuts out or skips Noise is generated noise is mixed with sound MP3 WMA files are not encoded properly Use properly encoded MP3 WMA files Sound is poor when power is first turned on Condensation may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with power on Wrong file name File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system wnloaded from Caradio Manual com Manuals Problem Cause Measure No sound The device contains no MP3 WMA files Record MP3 WMA files properly to the device The files are not proper MP3 WMA format Use properly encoded MP3 WMA files Connectors are loose Di
26. nd reload properly ERROR 2 iPod mode During the iPod analyse failure to achieve the iPod state or initialize the iPod driver unusual detection of iPod driver Switch to the iPod mode again reset the unit and iPod ERROR 3 iPod mode During the playback failure to achieve the iPod state unusual detection of iPod driver Switch to the iPod mode again USB iPod ERROR 5 iPod mode The connected iPod is not recognized Disconnect and reconnect the iPod ERROR 7 USB mode USB memory device format error Disconnect and reconnect USB memory device If device still cannot be recognized try replacing with different USB memory device If an nes Na other than i ones described above appears press the reset button If the problem rsist own Ad mai the power and sult your de Mua com Riina 21 CZ209E CZ209ER CZ209EG 9 SPECIFICATIONS Radio section Tuning System PLL synthesizer tuner Receiving Frequencies FM 87 5 to 108 MHz 0 05 MHz steps MW 531 to 1602 kHz 9 kHz steps LW 153 to 279 kHz 3 kHz steps CD player section System Compact disc digital audio system Frequency Response 5 Hz to 20 kHz 1 dB Signal to Noise Ratio 90 dB 1 kHz Dynamic Range 85 dB 1 kHz Distortion 0 01 General Output Power 25 W X 4 DIN 45324 B 14 4V Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Power Consumption Less t
27. onds of the first tracks of all folders on an MP3 WMA disc 1 Press and hold the SCN button 1 sec for folder scan play Repeat play This function plays the current track repeatedly 1 Press the RPT button for repeat play Folder repeat play Repeatedly plays all tracks of the current folder on an MP3 WMA disc 1 Press and hold the RPT button 1 sec for folder repeat play Random play This function plays all tracks recorded on a disc in random order 1 Press the RDM button for random play Folder random play This function plays all the tracks of all the folders recorded on an MP3 WMA disc in random order 1 Press and hold the RDM button 1 sec for folder random play To cancel play modes 1 Press the button previously selected x The play mode is canceled and the off mode appears in the display for 2 seconds x If the error display appears these modes Scan Repeat Random can be canceled while still in play mode Operations Common to Each Mode To change settings 1 Press and hold the DISP button 1 sec to switch to the adjustment display 2 Press I lt or KRI to select the item name as follows SETTINGS lt gt SCRN SVR lt SCROLL DIMMER gt TEL SP lt gt TEL SW The adjustment item will be displayed for 2 seconds before showing the desired value Turn the ROTARY knob to select the des
28. sconnect the device and reconnect securely Some USB portable music players may consume current that exceeds the USB rating In this case this unit s overcurrent protection circuit operates to stop the music playback Check operation of portable music player Sound is interrupted or has noise USB iPod MP3 WMA files are not encoded properly Use properly encoded MP3 WMA files Device isn t recognized Device is damaged Connectors are loose Disconnect and reconnect the device If device still cannot be recognized try replacing with different device According to the device s operation state device may not be recognized Disconnect and reconnect the device Cannot connect device to the USB cable Device has been connected improperly Connect the device in reverse direction Connector is broken Replace with a new device 8 ERROR DISPLAYS If an error occurs one of the following messages is displayed Take the measures described below to eliminate the problem Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected This is a failure of the CD deck mechanism Consult your dealer ERROR 3 A CD cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 CD MP3 WMA A CD is loaded upside down inside the CD deck and does not play Eject the disc a
29. sions 1 Always add a file extension MP3 or WMA to MP3 or WMA files using single byte characters If a different or no file extension is appended the file cannot be played Files without MP3 WMA data will not play Instead will appear in the play time display Logical format File system 1 When writing MP3 WMA files on a CD R or CD RW disc select ISO9660 level 1 2 or JOLIET or Romeo as the software format Normal playback may not be possible if recorded in other formats The folder name and file name can be displayed as the title during MP3 WMA play However titles must be within 64 single byte alphabetical letters and numbers including extension Do not affix a name to a file inside a folder with the same name Number of files or folders 1 Up to 256 files can be recognized per folder Up to 578 files can be played 2 Tracks are played in the order they were recorded onto the disc Tracks may not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used for recording Backup Eject function Press the 4 button to eject the disc even when the unit s power is turned off 1 Press the 4 button Remove disc after it is ejected Notes e If you force a CD in before auto reloading you may damage the CD e Ifa CD 12 cm is left ejected for 15 seconds it will be automatically reloaded a
30. ss M44 or PPI to select LANGUAGE 3 Turn the ROTARY knob to select the language 4 Press the DISP button to return to the previous mode Volume setting of TA emergency broadcast Alarm and PTY The volume for TA Alarm and PTY interrupts can be set during TA Alarm or PTY interrupt The factory default setting is 15 During a TA Alarm or PTY interrupt turn the ROTARY knob to set volume to desired level 0 to 33 x When the TA Alarm or PTY interrupt ends the volume returns to the previous level wnloaded from Caradio Manual com Manuals CD MP3 WMA Operations MP3 WMA This unit supports to play MP3 WMA files Notes e If you play a WMA file with active DRM Digital Rights Management no audio is output WMA indicator flashes e Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries To disable DRM Digital Rights 1 Management In Windows Media Player 9 10 11 click on TOOL OPTIONS MUSIC RECORD tab Under Recording settings unclick the check box for RECORD PROTECTED MUSIC Then reconstruct files Use personally constructed WMA files at your own responsibility Precautions when creating MP3 WMA files Usable sampling rates and bit rates 1 2 MP3 Sampling rate 8 kKHz 48 kHz Bit rate 8 kbps 320 kbps VBR WMA Bit rate 48 kbps 192 kbps File exten
31. t P Pause LZ See CD MP3 WMA Operations page 12 14 for details s After a Podcast file has completed playback the pause display or the track end position Play Time display will appear At that time select a music file once again s If the iPhone is used for telephone call in the other operation mode and you wish to switch to the iPod mode you must finish the telephone call and press the SM button to enter the iPod mode Setting iPod simple mode Use this function if you wish to operate through your iPod connected to this unit via the USB cable The factory default setting is OFF 1 Press and hold the DISP button 1 sec 2 Press Ida or PPI to select S CTRL 3 Press the ENT button 4 gt II Turn the ROTARY knob to select ON or OFP e ON Operations can be made through your iPod e OFF Operations cannot be made through your iPod 5 Press and hold the Z 1 button 1 sec to store the setting and return to the previous mode Notes e When performing iPod operations using simple control mode make the operations slowly If repetitive operations are performed too quickly unforseen errors may occur e Some iPod models do not support this function Consult your nearest Clarion dealer or website to confirm which models do not support this function Other various play functions in Play mode Notes e These functions are not supported when in the
32. t and Random mode operations are not supported when in the iPod menu mode In iPod menu mode playback may not be performed if 4 or gt is pressed or the ROTARY knob is turned quickly 2 Turn the ROTARY knob to switch between categories The iPod menu categories change as follows PLAYLIST gt ARTIST gt ALBUM gt SONG gt GENRE gt COMPOSER Note The iPod menu mode can be canceled by performing one of the following operations 3 4 Press the BND button Press the gt button when the category select screen is displayed Press the PP button to select the category When the track name display is showing press the PP button Playback will begin from the first track in the selected category and the iPod menu mode will be canceled Subfolders may be displayed depending on the category In this case use the ROTARY knob to switch between subfolders and use the Pl button to select the desired subfolder x When the track name display is showing press the I button to return to the currently playing folder name display Use the ROTARY knob to select a track within a category iPod menu alphabet search This function searches the subfolders for desired alphabetical letters 1 2 Downloaded from Caradio Manual com Manuals Press the BND button to select the iPod menu mode Turn the ROTARY knob to switch between categories Press
33. t setting is CENTER Adjustment range FRONT 12 to REAR12 Adjusting the non fader volume Adjust volume output from the unit s non fader output terminal 2 1 Select NF VOL 3 1 Turn the ROTARY knob clockwise to increase volume turn counterclockwise to decrease volume The factory default setting is 0 Adjustment range 6 to 6 Note e When in the sound adjustment mode if no operation is performed for 10 seconds or more the mode is cancelled and the unit returns to the previous mode Setting the MAGNA BASS EXTEND The MAGNA BASS EXTEND function does not adjust low frequencies like normal sound adjustments but emphasizes the deep bass range with dynamic sound The factory default setting is OFF 1 Press and hold the SOUND button 1 sec to enable MAGNA BASS EXTEND 2 Press and hold the SOUND button 1 sec to disable MAGNA BASS EXTEND CT Clock Time function The CT function receives CT data sent from an RDS station and displays the time If a CT data is not being received CT appears in the display Note e CT data is not transmitted in some countries and by some broadcast stations Also in some areas the CT may not display accurately ownloaded from Caradio Manual com Manuals Radio Operations Listening to broadcasts 1 Press the SRC button and select radio mode PS Programme service name PTY Programme type 2 Press
34. the BND button and select the reception band Each time the button is pressed the band changes as follows F1 FM1 gt F2 FM2 gt F3 FM3 gt AM MW LW F1 FM1 Tuning 3 tuning modes are available seek tuning manual tuning and preset tuning Seek tuning 2 seek tuning modes are available DX SEEK and LOCAL SEEK DX SEEK can automatically tune to receivable broadcast stations LOCAL SEEK can tune to only broadcast stations with a good reception sensitivity If MANU is appeared in the display press BND 1 sec MANU in the display goes off and seek tuning is now available x If TA is appeared in the display TP stations are automatically sought DX SEEK Press kj or gt P to automatically seek stations When the PP button is pressed the station is sought in the direction of higher frequencies if the 4 button is pressed the station is sought in the direction of lower frequencies LOCAL SEEK If lt 4 or gt I is pressed and held in position 1 sec local seek tuning will be enabled Broadcast stations with good reception sensitivity are selected Manual tuning 2 modes are available Quick tuning and step tuning Quick tuning Press and hold kK or PPI 1 sec to tune a station Downloaded from Caradio Manual com Manuals e Step tuning Press Ilda or KRI to manually tune a station If no operation is performed for 7 seconds or more manual tuning is canc
35. unplayable Therefore do not to leave them in the car for a long time Do not stick labels on compact discs or mark CHANGES OR MODIFICATIONS TO THIS the surface with pens or pencils PRODUCT UNAPPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY Display Screen e In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature ownloaded from Caradio Manual com Manuals 3 CONTROLS Names of the Buttons and Their Main Functions ENT RELEASE E it 4 EJECT laal gt gt I CD SLOT Ue AN ANEAN AN E E od AF REG TA TP PTY MANU AUX ROTARY RELEASE button s Press to unlock DCP 57 button e Perform preset scan while in the radio mode e Play or pause a track while in CD MP3 WMA USB iPod mode BND button e Change bands or select seek tuning or manual tuning while in radio mode CD SLOT e Insert CDs here AUX input jack e Input jack for connecting external device SOUND button e Press to switch to the sound adjust mode UP DN buttons e Select folders while in MP3 WMA USB mode DIRECT buttons e Store radio stations in memory or recall it directly while in radio mode Downloaded from Caradio Manual com Manuals RDM button e Perform random play while in CD MP3 WMA USB iPod mode RPT button e Perfor
36. uto reload Listening to a disc already loaded in the unit Press the SRC button to select CD MP3 WMA mode When the unit enters this mode playback starts automatically If no disc is loaded NO DISC appears in the title display Loading a CD 1 Insert a CD into the centre of the CD SLOT with label facing up The CD plays automatically after loading Notes e Never insert foreign objects into the CD SLOT e If the CD does not enter easily another CD may be in the unit or the unit may require service e Discs without the disg or di ROMs are not supported e Some CD R CD RW discs may not be usable mark and CD Pausing play 1 Press the N button to pause play PAUSE appears in the display 2 To resume CD play press the ENT button again Displaying CD titles This unit can display title data for CD text MP3 WMA discs 1 Each time the DISP button is pressed the title display will change CD TEXT discs Track Disc Artist gt Track MP3 WMA discs Track gt Folder gt Title gt Album gt Artist gt Track Notes e If the CD playing is not a CD text disc NO TITLE appears in the display e If an MP3 WMA disc has no Tag input NO TITLE appears in the display e This unit supports MP3 ID3 Tags V2 3 2 2 1 1 7 0 e Tag display gives priority to V2 3 2 2 e For WMA album Tags the information written into the extension header is d
Download Pdf Manuals
Related Search