Home

Setup Camera with CD

Contents

1. zer ADVANCED Alarm Output Alarm Output A gt 1 8 ei v English v om Name REM cannot System cannot copy ARMING SCHEDULE ER Bos Network ned Video Events Motion Detection Video Tamper Exception Snapshot Email Alarm Input Alarm Output Storage COPY TO ALARM Select Al gy A gt 1 Select All Copy the settings to other alarm Note This option is for the camera that has multiple alarm output channels 43 TRENDnet User s Guide TV IP430PI Storage Management Micro SD card or Network storage device must be setup formatted before it can be managed stored Camera will save to SD card only when there is no additional NAS device setup LAE E BASIC Ld Storage Management Format selected folder Format English ZS System Ei CAPACITY FREE SPACE STATUS PROPERTY PROGRESS m 146 47GB 49 50GB Normal R W Network Video Events Storage storage Management Network Storage FIP Server Micro SD slot is located on the back of the camera Using a screw driver to loosen the screws and remove the cover Please make sure the environment is dry and clean when opening the dome cover Copyright 2015 TRENDnet All Rights Reserved Network Storage Network Storage must be setup before it can be managed For storage management please refer to the next section The camera supports two formats of network storage file systems NFS and SMB CIFS N
2. Copyright 2015 TRENDnet All Rights Reserved Lens Initialization Backlight Control White Balance TV IP430PI This Digital Wide Dynamic Range feature helps to improve the image quality under limited light source Higher value brings brighter images SIT Enabled ili D WDR Level s 10 The lens operates the movements for initialization when you check the check box If there s a bright backlight the subject in front of the backlight appears silhouetted or dark Enabling Backlight Control function can correct the exposure of the subject But the backlight environment is washed out to white Manual In Manual mode you can adjust the color temperature manually to meet your own demand Outdoor You can select this mode when the speed dome is installed in outdoor environment Indoor You can select this mode when the speed dome is installed in indoor environment Fluorescent Lamp You can select this mode when there are fluorescent lamps installed near the speed dome Sodium Lamp You can select this mode when there are sodium lamps installed near the speed dome Auto Track White balance is continuously being adjusted in real time according to the color temperature of the scene illumination Auto 32 TRENDnet User s Guide TV IP430PI The camera retains color balance automatically e When IR Light Mode is set to manual and the IR Light Bright is 0 you can set according to
3. ArsoTRENDnetdeklar ka TV IP430PI atbilstDirektivas 2004 108 EK un 2006 95 EK butiskajamprasibam un citiemar to saistitajjemnoteikumiem iuo TRENDnet deklaruoja kad is TV IP430PI atitinka esminius reikalavimus ir kitas 2004 108 EB Direktyvos nuostatas Hierbij verklaart TRENDnet dat het toestel TV IP430PI in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 2004 108 EG Copyright 2015 TRENDnet All Rights Reserved Malti Maltese Magyar Hungarian El Polski Polish Portugu s Portuguese Ll slovensko Slovenian Slovensky Slovak f suomi Finnish Lal svenska Swedish Hawnhekk TRENDnet jiddikjara li dan TV IP430PI jikkonforma mal htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid Dirrettiva 2004 108 KE Alul rott TRENDnet nyilatkozom hogy a TV IP430PI megfelel a vonatkoz alapvet k vetelm nyeknek s az 2004 108 EK Niniejszym TRENDnet oswiadcza ze TV IP430PI jest zgodny z zasadniczymi wymogami oraz pozostatymi stosownymi postanowieniami Dyrektywy 2004 108 WE TRENDnet declara que este TV IP430PI esta conforme com os requisitos essenciais e outras disposi es da Directiva 2004 108 CE TRENDnet izjavlja da je ta TV IP430PI v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 2004 108 ES TRENDnettymtovyhlasuje Ze TV IP430PI sp az kladn po iadavky a vSetkypr slusn ust
4. G M 23 e 23 Bee 24 DONS T 24 Lg e T E 25 oM M G 25 210 PAP Vr 26 ee SS DI PERO ET I LU 27 OOS Quality oT Servite sccscsxeccowasasnconasacacowassnasn Dor quisa tdsquas aba ege 27 Et 28 Il m 28 EECHER 28 nU m 29 Bre elc quin NE o omm 30 B 418 E Race 34 Video e Tel 35 EV CIWS EE 36 MODE RCCU EE 36 Video Tampe EE 38 ge EE 40 REI Se ee 40 ug UE 41 PASE AL EE 42 P MN ge E 43 ele 44 TRENDnet User s Guide Table of Contents Storage Management E 44 Network e E 44 EE 45 PTZ Pan Tilt ZOOM ccescssccsccsscsscceccscccsccsccecceccessscceccescessessceceess 46 BASIC c c 46 Deene 47 AER At e E 48 ci sed ee J I 48 Private TIVI E o neat E aieo tico tongue E eue zl csemeR IPAE RM Ida nue 49 Kee EE 49 ee 50 Restore Default Password 1 ecce eee eee eee eene eee nennen nennen 51
5. Audio Input Select Line In or Mic In to adjust volume Input Volume Slid the bar to turn up down the volume The value ranges from O to 100 Click Save to save the changes Max Bitrate Choose the maximum video sampling bit rate Default 3072 Frame Interval An I Frame is a frame that records a complete picture Frames between frames P frame or B frame only records the image differences between two frames Choose the Frame Copyright 2015 TRENDnet All Rights Reserved 29 TRENDnet User s Guide Display Settings Adjust video image quality lightness and color settings here BASIC ADVANCED Display Settings uii 20 15 frit 2 System i Tem ip Network D Video Video Format Audio OSD Settings Text Overlay Video Recording Brightness Events Contrast Storage Saturation Limit Gain PTZ Display Settings Brightness Use the slider or enter a number 0 100 to adjust the ee image brightness Default 50 Contrast Use the slider or enter a number 0 100 to adjust the a image contrast Default 50 Saturation Use the slider or enter a number 0 100 to adjust the color saturation The greater number means the color will be more saturated Default 50 Limit Gain Use the slider or enter a number 0 100 to adjust the color shade Default 50 Copyright 2015 TRENDnet All Rights Reserved Sharpness Focus Mode Minimum Focusing Exposur
6. and 2 this device must accept any interference received including interference that may cause undesired operation This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body IMPORTANT NOTE Radiation Exposure Statement This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Country Code selection feature to be disabled for products marketed to the US CANADA Copyright 2015 TRENDnet All Rights Reserved Europe EU Declaration of Conformity TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility EMC EN 55022 2010 Class A EN 611000 3 2 2006 A1 2009 A2 2009 EN 611000 3 3 2013 EN 50130 4 2011 This product is herewith confirmed to comply with the Directives Directives EMC Directive 2004 108 EC RoHS Directive 2011 65 EU REACH Regulation EC No 1907 2006 53 TRENDnet User s Guide TV IP430PI Cesky Czech da Dansk Danish Deutsch German Eesti Estonian en English es Espa ol Spanish EAANVLKH Greek frl Francais French Lit itatiano Italian Latviski Latvian Lietuviy Lithuanian nl Nederlands Dutch TRENDnet t mto prohla uje z
7. le lei Ee Le le d Uu IO TTE 52 Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI Product Overview TV IPA30PI Package Contents e TV IP430PI e CD ROM Software amp User s Guide e Multi Language Quick Installation Guide If any package contents are missing or damaged please contact the retail store online retailer or reseller distributor that the item was purchased from Copyright 2015 TRENDnet All Rights Reserved Features TRENDnet s Outdoor 2 MP Full HD 1080p PoE IR Mini Soeed Dome Network Camera model TV IP430PI offers 4x optical zoom 30 meters 100 feet night vision an IP66 weather rating and endless 360 degree PTZ functionality Record 2 Megapixel HD video 1920 x 1080 at 30 fps in a space saving H 264 compression format Manage up to 32 TRENDnet cameras with included complimentary software and mobile apps A separate mounting bracket is required install with TRENDnet s TV HC400 TV HW400 TV HP400 or TV HN40O 2 Megapixel Full 1080p HD Record 1920 x 1080 at 30 fps in the space saving H 264 compression format Auto Patrol Choose pre defined or program auto patrol sequences with varying zoom levels Storage Record video to a Samba client or to a Micro SD card up to 64GB sold separately Tamper Detection Receive tamper detection still image via email D WDR Improved image quality and autofocus in high contrast lighting environments with Digital
8. 1 10 Stop Motion Detection Start Motion Detection TT Remote Get 2015 01 26 17 31 45 Operation a en 192 168 1 10 E Remote Get 2015 01 26 17 31 45 Operation Ris eres 192 168 1 10 Stop Motion Detection Total 463 Items First Page Prev Page 1 5 Next Page Last Page Playback 192 168 1 109N 2015 01 26 17 33 24 Alarm local 2015 01 26 17 33 16 Alarm local 2015 01 26 17 32 10 Alarm local 2015 01 26 17 32 04 Alarm local v 2015 01 26 17 29 53 Alarm local Search for logs Click the type of log and then the Start Time and End Time Click Search to start searching Total 463 Items First Page Prev Page 1 5 Next Page Last Page Click First Page Prev Page Next Page and Last Page to show the logs Click Save Log to save the logs to your computer 17 TRENDnet User s Guide TV IP430PI System System Information page shows the camera basic information Click System then click System Info to show the page Lodi ADVANCED System Information BASIC INFORMATION Device Name TV IP430PI Firmware Version V5 2 5 build 150119 Playback Mac Address d8 eb 97 cd 9d f4 System Time 2015 01 19T14 32 02 Log NETWORK INFORMATION System IP Address 192 168 1 50 System Info Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 Primary DNS 192 168 1 1 Secondary DNS Copyright 2015 TRENDnet All Rights Reserved Device Settings Setup your camera name and location for easy identifica
9. 15 54 15 ch00_08000000000003100 2015 01 26 15 54 25 ch00_08000000000003200 2015 01 26 15 54 35 Pe te fe Wf wa Ta fa Ta Ta Ta a Te Te Ta Ta Ta Ae Ae Te Ta ANI NAI AS Irra e 2015 01 26 13 00 00 End Time 2015 01 26 16 59 59 Total 425 Items First Page Prev Page 1 5 Next Page Last Page Select the type of event that triggered the snapshots Choose the Start Time and End Time Then click Search to find the snapshot list Check the time of the snapshot and then select the snapshots you want to download then click Download Note Where can find saved files Videos and snapshots captured from Playback will save to your computer Copyright 2015 TRENDnet All Rights Reserved Log The log of the TV IP430PI will be saved on the network storage You can search the relevant records and save to your local computer ADVANCED Search Log Log works only if the NAS is available Major Type Minor Type English All Types All Types Search Live View Start Time End Time 2015 01 26 00 00 00 2015 01 26 23 59 59 Time Major Type Minor Type IP Log Remote Get 2015 01 26 17 36 30 Operation Working Status Geet Remote Get 2015 01 26 17 36 25 Operation SESS 192 168 1 10 a Remote Get 2015 01 26 17 36 25 Operation Parameters 192 168 1 10 Stop Motion Detection Start Motion Detection 2015 01 26 17 32 27 Operation Remote Get 192 168 1 10 Parameters 29 Remote Get 2015 01 26 17 32 27 Operation Sunnie aks 192 168
10. 264 and MJPEG Copyright 2015 TRENDnet All Rights Reserved 10 TRENDnet User s Guide TV IP430PI preset Use the presets panel to move to previously saved locations Preset 1 2 Preset 2 Presets 3 Preset 3 Configure a Preset position A P ata A preset is a predefined image position For the defined preset you can click the Call button to quickly view the desired image position 5 Preset 5 6 Preset 6 1 Inthe PTZ control panel select a preset number from the preset list Preset 1 The following presets are predefined with special commands You can only call them but not configure them For instance preset 99 is Start auto scan If you call preset Preset 3 99 the speed dome starts auto scan function 2 3 5 Preset 5 Preset Preset 6 Preset 6 Auto flip Set limit stops manually Back to initial position Remote reboot 2 Use the PTZ control buttons to move the lens to the desired position Call patrol 1 oe Stopascan e Pan the speed dome to the right or left Call patrol 2 Start random scan Tilt the speed dome up or down Call patrol 3 98 Start frame scan e Zoom in or out Call patrol 4 99 Start auto scan e mn Starttiltscan Preset 2 39 IR cut filter in 100 Start tilt scan 3 Click MM to finish the setting of the current preset 40 IR cut filter out 101 Start panorama scan 41 Call pattern 1 102 Call patrol 5 4 You can click Bad to delete the preset You can configure up to 256 presets
11. All Rights Reserved 37 TRENDnet User s Guide configured Network Storage when motion is detected Go to Network Storage or FTP to setup server information Network Storage Check this box to send video clip to network storage when motion is detected Go to Storage gt Network Storage to setup Storage server information Click Save to save the changes Video Tamper This is to detect if the camera has been tampered with and surveillance is compromised You can set up tamper proof notifications to alert the system manager to check the Camera Tampering Event Enable Tamper Detection wj AREA SETTINGS B d 5 Mon 06 30 30 20 NNI WARS 5 A S D Events Motion Detection iS Wu DU Au HUT itti Video Tamper Exception Snapshot TL UELL lt H Email os B Alarm Input Alarm Output c Storage Copyright 2015 TRENDnet All Rights Reserved TV IP430PI Tamper proof Enable Tamper Detection Check this box to enable tamper detection Click Save to save the settings Draw Area Click Draw Area button to start drawing Click and drag on the area you want to set up the tamper detection You can setup only one area for tamper detection Click Stop Drawing to stop drawing motion detection areas The gray block represent the detection area rr R Sensitivity Move P slider to adjust detection sensitivity Clear All Click this button to clear all
12. Alphanumeric a z A Z 0 9 e Fixed IP Select this option if you want to configure the camera with a static IP address Admin ID Password Change Password New password Confirm new password 7 f you select Fixed IP enter the IP address subnet mask default gateway and DNS server address Please make sure the IP address you are setting on the camera is in the same network of the computer that you are using Click Next Fixed IP Address Setup Please input the correct network address information This camera installation wizard is also good for finding the camera if it was setup with DHCP The IP address may change dynamically with the DHCP setting If you want to access your camera again and you don t know the IP address you can run this camera KEEN installation wizard again If you have already setup the password and want to keep the Subnet Mask password unchanged un check the Change Password box and click next to get the link C to access your camera PME ll Please save the password for future references This device does not have a hardware reset function for temper proof purpose Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI 9 Click here to access to the camera s web page or click Next for mobile app installation Initial setup is complete Local access from your computer To access the camera now click here If DHCP Mode sele
13. Calling a Preset position 42 Call pattern 2 103 Call patrol 6 In the PTZ control panel select a defined preset from the list and click Bi to call the 43 Call pattern 3 104 Call patrol 7 Copyright 2015 TRENDnet All Rights Reserved 11 TRENDnet User s Guide TV IP430PI Call pattern 4 105 Call patrol 8 9 smes Auto fip w 34 Back to ins 35 Call patrol 1 36 Call patrol 2 Note When you call preset 45 one touch patrol the speed dome patrols from presets 1 to 32 Before you enable this function please set presets 1 to 32 first Copyright 2015 TRENDnet All Rights Reserved Patrols A patrol is a memorized series of preset functions It can be configured and called on the patrol settings interface There are up to 8 patrol available for customization A patrol can be configured with 32 presets Configure a Patrol route ei 1 Inthe PTZ control panel click to enter the patrol settings interface 2 Select a patrol number from Path 01 E Click o to add a preset to a patrol path Patrol Preset DECE Patrol duration 4 Patrol Speed 1 OK Cancel 3 Configure the preset number patrol time and patrol speed Description Patrol This is the duration the camera stays on one patrol point The speed Time dome moves to another patrol point after the patrol time Patrol This is the speed that the camera moves in between patrol points Speed 12 TRENDnet User
14. OK to save the settings Clear Config 1909 I Note The time for each task cannot be overlapped up to 10 tasks can be configured for each day Copyright 2015 TRENDnet All Rights Reserved 50 TRENDnet User s Guide TV IP430PI Restore Default Password For security purpose if you find yourself in need of restoring the camera to factory default setting you will need to contact technical support Toll Free English Technical Support USA Canada 855 373 4741 Monday Friday Except holidays 7 00 AM 5 30 PM Pacific Standard Time After hours 866 845 6373 Global Support Find the support number for your country at www trendnet com contat Online Support www trendnet com support helpdesk Copyright 2015 TRENDnet All Rights Reserved 51 TRENDnet User s Guide TV IP430PI Troubleshooting The camera is not work properly with standard 802 3af POE This camera is an 802 3at PoE compatible appliance If powered by an 802 3af power sourcing equipment it will not draw enough power for camera s IR LEDs To prevent this please ensure it is being powered by an 802 3at power sourcing equipment The camera can t be accessed or access is slow There might be a problem with the network cable To confirm that the cables are working ping the address of a known device on the network If the cabling is OK and your network is reachable you should receive a reply similar to the following byt
15. The sensor may be burned out by a laser beam When any laser equipment is B CN being used make sure that the surface of the sensor will not be exposed to the EE B m Du laser beam i SE e Do not place the camera in extremely hot cold temperatures the operating temperature should be between 30 C to 65 C dusty or damp environment and do not expose it to high electromagnetic radiation P e To avoid heat accumulation good ventilation is required for a proper operating Network cable d SC Ze environment connection IK il SC e While shipping the camera should be packed in its original packing K e Use water proof tape to cover all the wires cables which will be exposed outdoor after the camera installation Audio Line in line out and grounding wires see c Z Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI There are a number of factors involved in successful camera installation Follow the e Sunlight Avoid direct sun light exposure Direct sun light will damage the suggested installation steps and go through the check lists This guide will help you to image sensor If sunlight is necessary for your viewing purposes provide make your camera installation smooth and easy protection for the image sensor e Lighting Consider installing your camera faces the same direction of the light e Plan for installation location sources Sho
16. address if you connect the camera to your existing network If you want to access your camera directly instead of using software you can follow the steps specified in this chapter to login to your camera A web browser plug in must be installed to view live image TRENDnet User s Guide TV IP430PI Logging in to the Camera 3 The camera management page will detect if you installed the camera video streaming plug in or not Click the link to download the plug in from the 1 Open the web browser on your computer In the address bar enter the IP are address you setup through the setup CD or 192 168 10 30 If you have a DHCP server on your network the IP address will be assigned dynamically For BASIC ADVANCED iive View Double click the image to view in full screen example if you have a home gateway on your network and you plug in the camera on the same network you can find the camera s IP address on your MILL home gateway and then press Enter Playback index Internet Explorer Please click here to download and install the plug in Close the 7 browser when installing the plug in EC amp htip 192 168 1 50 ig System 2 Enter the user name admin and the password you setup through the setup CD or the default password admin and then click OK Permission request depends on the Internet security settings of your computer The server 192 163 1 50 at TV IPA30PI requires a username and pa
17. an IP66 grade water proof camera and it will work in moist environments However rain may affect the picture quality especially at night water may reflect the light from the infra red illumination and degrade picture quality e Temperature Camera works within a specified temperature range Areas with severe temperatures should be avoided when installing the camera It s recommended that you use an enclosure with a heater and blower if you plan on using this camera outside of the specified temperature range Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI 2 Write down the MAC Address of the camera Write down the MAC address of your camera This information is required in the installation process The MAC address is located on the camera label shown in photo below Model TV IP430PI Oideas 2 MP Full HO ttp PEs R a HIH HINN 3 Connect the power network cable Connect the network cable Connect a network cable to the camera s network port to your PoE Switch The IR LEDs will be on and you can see dim visible red light Allow 60 seconds for the camera to boot up 4 Wait while the utility is searches for the camera Copyright 2015 TRENDnet All Rights Reserved Please wait while the wizard searches for your camera The installation wizard will list cameras found on your network If only one camera is found it will be selected by default If you have m
18. m E riidddee Exception MN Snapshot 4444404 ZE eg Email qt LL ps JN Motion Detection Thay NI BM Alarm input I Dui Alarm Output o but gn nu Video Tamper fe Exception n LI EET uM NEN en e ARMING SCHEDULE Snapshot W AE Email II TTL mg ali Alarm Input Ex D daan STER HI fi Alarm Output iid 10 12 14 16 18 20 22 24 X H ms NU wen eZ P ME Storage vg kb Motion Detection Enable Motion Detection Check this box to enable motion detection Click Save to save the choice Enable Motion Tracking Check this box to enable motion tracking Motion Send Email g tracking is a dynamic display that shows the current status of motion detection The motion Upload Snapshot ga Nelwork Storage gy tracking is displayed by a green grid The grid area represents that the camera detects motion in this TRIGGER ALARM OUTPUT Select AIR gp a gt i area Click Save to save the choices Click Draw Area button to start drawing Click and Copyright 2015 TRENDnet All Rights Reserved 36 TRENDnet User s Guide TV IP430PI drag on the area you want to set up the motion Arming Schedule detection You can draw up to 8 different areas Click Edit to define when you want the motion Click Stop Drawing to stop drawing motion glate Gewebe detection areas Edit Schedule Time The red g
19. the current color temperature the day night mode manually e When IR Light Mode is set to manual and the IR Light Bright is not O night Hanusa Outdoor mode is set as the default mode Manually setting the day night mode is Indoor invalid Fluorescent Lamp 6500K Sodium Lamp Auto Track Auto Digital Noise Reduction Enable or disable noise reduction On Screen Display OSD Settings Noise Reduction Level Adjust the effect of digital noise reduction Range 0 100 default 100 Defog Mode Select defog mode ON for a foggy environment The default is OFF Zoom Limit you can set Zoom Limit value to limit the maximum value of zooming The value can be set to 20 40 80 160 and 320 You can display the camera name and the time the video is shooting on the screen vr BASIC BASIC men On Screen Display j Ki hi T Cie qal ov EL System ia a US WI gt TTL r Network f gum a Wi OM e N SS f e x ALAN NN HLC High Light Compensation makes the camera identify and suppress the strong light sources that usually flare across a scene This makes it possible to see the detail of the image that would normally be hidden Video Video Format 4 1 TII mma li LODS Audio m Display Settings ih IR Light Mode Auto The brightness of the infrared light will be adjusted automatically OSD Settings WT HE M mm x
20. the set up areas Enable Tamper Detection Check this box to enable tamper detection Click Save to save the settings 38 TRENDnet User s Guide TV IP430PI Edit Schedule Time ARMING SCHEDULE Mon Tue Wed Thu Fri Sat Sun Period Start Time End Time 0 2 4 6 8 10 12 14 16 18 20 22 24 IN WH WE o n lm o e m o o o o m m OS O Select Al Mon Tue Wed Thu Fri Sat Sun Select the day of the week you want to edit the schedule Set the time period you want to enable tamper detection Default is 0 24 hours all day Click Copy to Week if you want the same NOTIFICATION daily schedule every day Or you can select Send Email g other day of the week and click Copy to copy the schedule of the day to other days Select another day of the week by clicking Sae on its tab to set the next schedule Click OK when you have finished your settings Arming Schedule Click Edit to define when you want the tamper Check this box to send an e mail notification when detection works motion is detected Go to Events Email to setup email account information Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved 39 TRENDnet User s Guide TV IP430PI Exception Provides notifications for other system events set up your notifications here BASIC d System Notification Soe Storage Full S English M System NOTIFICATION nm Send
21. 12 13 MB chO1 08000000000000113 2015 01 19 12 38 2015 01 19 12 38 11 MB chO1 08000000000000213 2015 01 19 12 38 2015 01 19 12 38 5 MB ch01_08000000000000313 2015 01 19 12 41 2015 01 19 12 41 9 MB ch01_08000000000000413 2015 01 19 12 44 2015 01 19 12 44 7 MB ch01_08000000000000513 2015 01 19 12 46 2015 01 19 12 46 8 MB ch01_08000000000000613 2015 01 19 12 48 2015 01 19 12 48 7 MB ch01_08000000000000713 2015 01 19 13 03 2015 01 19 13 03 6 MB ch01_08000000000000813 2015 01 19 13 05 2015 01 19 13 06 6 MB chO01 08000000000000913 2015 01 19 13 06 2015 01 19 13 07 7 MB chO1 08000000000001013 2015 01 19 13 09 2015 01 19 13 09 5 MB chO1 08000000000001113 2015 01 19 13 34 2015 01 19 13 34 7 MB chO1 08000000000001213 2015 01 19 13 35 2015 01 19 13 35 8 MB ch01_08000000000001313 2015 01 19 13 36 2015 61 19 13 37 7 MB ch01_08000000000001413 2015 01 19 13 50 2015 01 19 13 50 6 MB chO1 08000000000001513 2015 01 19 13 51 2015 01 19 13 51 7 MB chO1 08000000000001613 2015 01 19 13 52 2015 0119 13 52 7 MB ch01_08000000000001713 2015 01 19 13 52 2015 01 19 PAY 7 MB ch01_08000000000001813 2015 01 19 13 56 2015 0119 13 57 10 MB Total 19 Items First Page Prev Page 1 1 Next Page Last Page Click this button to disable zoom Click this button to take a snapshot of current playback Click this button to start clipping a video from playback Click this button to stop clipping a video from playback Copyright 2015 TRENDnet All R
22. AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE Governing Law This Limited Warranty shall be governed by the laws of the state of California Some TRENDnet products include software code written by third party developers These codes are subject to the GNU General Public License GPL or GNU Lesser General Public License LGPL Go to http www trendnet com gpl or http www trendnet com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers TRENDnet does not provide technical support for these codes Please go to http www gnu org licenses gpl txt or http www gnu org licenses lIgpl txt for specific terms of each license 55 TRENDnet Product Warranty Registration Please take a moment to register your product online Go to TRENDnet s website at http www trendnet com register TRENDnet 20675 Manhattan Place Torrance CA 90501 USA Copyright 2015 All Rights Reserved TRENDnet
23. Dnet All Rights Reserved Network interface MAC Address Click this button to reboot this camera match your network Default auto MTU Maximum transmission unit The maximum byte size Secondary DNS Enter your second IPv4 or IPv6 DNS server address DHCP Check this box if the IP address is assigned by DHCP server IPv4 Address Load complete factory default to the camera Network range of the subnet Default Gateway The default route going further from camera IPv4 subnet Multicast Address Multicast address for video streaming IPv6 Mode Choose Manual DHCP or Route Advertisement Click View Route Advertisement to find a route advertisement Manual DHCP IPv6 Address IPv6 address of the camera Prefix Length Length of network prefix Default Gateway The default route going further from camera IPv6 subnet Click Save to save the changes 23 TRENDnet User s Guide TV IP430PI Port You can change the service ports number of the camera or disable RTSP or HTTPS services BASIC Service Ports Enable disable service ports Change service port numbers English hd PORT NUMBERS EE rro FREE Tm So Network ak thea P TCP IP HTTPS Port Port PPPoE ADSL SNMP 802 1X IP Address Filter Port Numbers HTTP Port The default web access port You can change the port number However you cannot disable the web service The default port number is 80 RT
24. Email g Network E Sae D Events Motion Detection Tamper proof Exception Snapshot EMail Storage Notification Exception Type First choose the exception type then choose the corresponding action Check this box to send an e mail notification when motion is detected Go to Events Email to setup email account information Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved Snapshot You can set up your camera to continuously take snapshots or take snapshots when an event happens Snapshot CONTENTIOUS English Enable A Format T ars oleae 1020 1080 Qe Video Quality Interval millisecon Y D Events Motion Detection EVENT TRIGGERED Video Tamper Enable Exception Format PEG Snapshot Email eee O90 1080 Alarm Input Alarm Output EE High millisecon Y Interval Storage Capture Number Check this box to continuously take snapshots Save snapshots in JPEG format Resolution Uses the same resolution set in Video Format for the snapshot resolution Quality Choose a compression quality for snapshots State the time interval between snapshots The default interval is 10 seconds Click Save to save the changes 40 TRENDnet User s Guide TV IP430PI Event Triggered Email Check this box to take snapshots when an event is Set up email accounts for notifications occurred nr mme Email A t
25. FS Network File System is natively supported by Linux computers and most NAS Network Attached Storage SMB CIFS Common Internet File System is natively supported by Windows systems and now is generally supported by Linux and OS X9 You can add up to 8 network storages for your camera The recordings will subsequently be stored in these spaces Save video from the first storage and then the next when the first one is full Click on the entry to change the settings and click Save to save the settings P Network Storage No Type Server Address File Path Capacity GB SMB CIFS User Name ladmin Password SS NAS Network Video NAS NAS Events NAS Storage NAS Storage Management NAS Network Storage FTP Server NAS gt PTZ 44 TRENDnet User s Guide TV IP430PI FTP Server Enter the file path on the server for network Enable Snapshot to FTP wj Enable English v storage Server Adress Capacity Enter the size of the disk space you want to assign Port for this storage The minimum disk space User Name Anonymous requirement is 8GB If you do not want to limit the size and use the full physical disk space enter O in this field Events Confirm A dE SECHER Save in the root direc v File System Choose between NFS or CIFS for file system If you ore assign the network storage on a Windows pisei Storage Management computer set it to SMB CIFS if you use an OAM NL anonymous
26. L secured connection Attach Image Interval Check Attach Image if you want to send a Normally Open and NC Normally Closed BASIC ADVANCED Alarm Input Alarm Input No EM snapshot image with the email notification and English v select the interval of snapshots in seconds Authentication Check this box if your server requires a password BIS Network in order to send email Most email servers require ARMING SCHEDULE Video authentication when sending an email Username Enter the user name of outgoing email account Confirm Enter the password again to confirm that the password was entered correctly Click Save to save the changes Events Motion Detection Video Tamper Exreption Snapshot Emal Alarm Input Alarm Out NORMAL LINKAGE Send Email Receiver Receiver 1 The first receiver s name Receiver 1 s Address The first receiver s email address Receiver 2 The second receiver s name H J Upload Snapshat Meteork Storage Audie Warming Moty 5urwelllanoe Center Receiver 2 s Address The second receiver s email address Receiver 3 The third receiver s name Click Test to test the email settings A text email will send to Receiver s email address Click Save to save the changes TRIGGER ALARM OUTPUT KZ Ze dE NE NI PTZ LINKING Preset No NAx l Patter
27. Mi Nk Text Overlay Video Recording Manual you need to adjust the brightness value of infrared light manually IR Light Sensitivity value ranges from O to 100 Brightness Limit The image brightness is adjusted automatically You can specify the brightness limit range from O to 100 Note Events Display Name Storage g Display Date Display Week PTZ Time Format e When IR Light Mode is set to auto the day night mode is adjusted automatically according to the IR Light Mode Manually setting the day night mode is invalid Copyright 2015 TRENDnet All Rights Reserved 33 TRENDnet User s Guide TV IP430PI OSD Display Text Overlay Display Name Check this box to display the product name that Display extra information on the screen over the image was setup in the device settings refer to page 25 ane p gs pag BASIC mmer Text Overlay to change the device name OI EN Display Date Check this box to display system time B ech RU Weg Display Week Check this box to display time of the week System Er d D k LIPS P gt Ia LS f Select 12 or 24 hours time format Data Format Select different date format Display Mode Select transparent flashing format Select different size format Auto 16 16 32 32 48 48 64 64 Click Save to save the changes Network Me ENS M Video Video Format Audio Display Settings OSD Settings Text Ove
28. NMP 802 1X Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved SNMP SNMP Settings allows you to assign the contact details location community name and trap settings for SNMP This is a networking management protocol used to monitor network attached devices SNMP allows messages called protocol data units to be sent to various parts of a network Upon receiving these messages SNMP compatible devices called agents return data stored in their Management Information Bases Simple Network Management SNMP V1 V2 Enable CA Enable SNMP wie Read SNMP Community Write SNMP Community Trap Address DONS PPPaE ADSL Trap Part SNMP Bux Trap Community IP Address Filter SNMP V3 Enable SMME3 Read LiserMame Security Level Authentication Algerithirn Authentication Password Privgbe key Algorithm Privatg key password Write UserMame Authentication Algeribhrm C MDS KH Authentication Password Privabe hey Algorithm Privabe key password SNMP OTHER SETTINGS SNMP Port 1051 25 TRENDnet User s Guide TV IP430PI TEE Oooo ee Enable SNMPv1 Check this box to enable SNMP v1 management Private key Algorithm Choose the privacy key to encrypt SNMP messages Enable SNMPv2c Check this box to enable SNMP v2c management DES or AES Read SNMP Community Specify the password for access the SNMP Private key Password Specify the privacy key between 8 to 32 le
29. SED OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF TRENDNET S PRODUCTS Copyright 2015 TRENDnet All Rights Reserved TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY THIRD PERSON S MISUSE NEGLECT IMPROPER INSTALLATION OR TESTING UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT TRENDNET S OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE
30. SP Port The Real Time Streaming Protocol port for video streaming You can change the port number or disable the service by uncheck the box The default Copyright 2015 TRENDnet All Rights Reserved HTTPS Port The secured web service port You can change the port number or you can disable the service by uncheck the box The default port number is 443 Click Save to save the changes DDNS Dynamic Domain Name Service DDNS allows you to find your camera from the Internet with an easy to remember domain name BASIC Dynamic Domain Name Service DDNS Easier locate your camera by setting up dynamic domain name service English v E System DDNS Type Server Address Enable DDNS Deg I EE Network La TCP IP Domain Port DDNS PPPoE ADSL Password SNMP 802 1x IP Address Filter User Name Confirm Enable DDNS Check this box to enable DDNS Service DDNS Type Select a DDNS service provider Server Address Enter the DDNS server address Domain Enter your registered domain name on selected 24 TRENDnet User s Guide TV IP430PI Click Save to save the changes PPPoE Setup PPPoE ADSL connection to connect your camera with your ISP Internet Service Provider BASIC PPPoE ADSL Connect to the Internet with PPPoE English v A System Dynamic IP User Name Enable PPPoE g ei Ep Network La Password TCP IP Port Confirm DDNS A S
31. Set the angle display duration white panning and tilting as 2 seconds to 10 seconds always on or off Preset Status Set the preset name display duration as 2 seconds BEEN to 10 seconds always on or off Set Resume Time Point The camera can resume its previous PTZ status or actions after it is restarted from a power off You can set the time point of which the camera resumes its PTZ status from 30 seconds up to 600 seconds before power off Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved TV IP430PI Limit The camera can be programmed to move within the configured stops left right up or down Momi6 30 3 m B WS S E E Ge us E WO MU 1 Weer Ini illl uum i Preset 1 SETS NN Preset 2 allt mmm STT Preset 3 J 1 wg Preset 4 b E a Y Vi d Preset 5 Enable Limit gy Kus Manual Stops he GGU no limited Limit Initial Position Park Action Save Privacy Mask Scheduled Tasks Clear Config Steps Check the Enable Limit box and select Manual Stops or Scan Stops from the Limit Type list a When manual limit stops re set you can operate the PTZ control panel manually only in the limited area When scan limit stops are set all the scan actions are performed only in the limited area b 2 Click the PTL control buttons to find the left right up down stop limits you can also c
32. Setti Save snapshots in JPEG format mail Account Settings n e z SENDER Resolution Uses the same resolution set in Video Format for English Sender the snapshot resolution Sender s Address Quality Choose a compression quality for snapshot State the time interval between this series of deas Video SMTP Port n NJ wn snapshots The default interval is 1 second Enable SSL Events Capture Number State how many snapshots you want to take in a Interval WM E Attach Image Motion Detection single triggered event Default 3 pictures Authentication Video Tamper Click Save to save the changes Exception User Name Snapshot L i Email Password Alarm Input Alarm Output Storage RECEIVER gt PTZ Receiveri Confirm Receiveri s Address Receiver2 Receiver2 s Address Receivers Receiver3 s Address Enter the name to appear as the email sender Sender s Address Enter sender s email address SMTP Server Simple Mail Transportation Protocol Server address the outgoing email server address Please 41 Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI NE ask your email service provider for details Alarm Input SMTP Port Service port number for outgoing email Choose Alarm Input number name and alarm type The alarm type could be NO Check this box if your service provider requires a Enable SSL SS
33. TRENDnet User s Guide A a af Outdoor 2 MP Full HD 1080p PoE IR Mini Speed Dome Network Camera TV IP430PI TRENDnet User s Guide Table of Contents Contents Bel i PrOGUCE e e 2 Package Contents E 2 Sg H El 3 cpu ET 3 E Ee 3 Plan for ISA ALIO mee 4 Setup Camera with CD sesessesessecessecessscessecessscecsscecssoesescesesoesesseseeseo 4 Access Camera through the Web Browser sessssessssesessecesoecessecesseceeee 7 System Management and Default Settings ccccccccsssseccceceseeccecaeeccessaeaeeeesseeeeeeeseuees 7 WOR SINFO TSC AIC eant UHR RR Un QNI NERO anus QUERER MriNE UIN REU NEQU MID Dad rts pH RE 8 BEER 10 WR met 10 dizi 11 ado M 12 pig fee an ane ays ante E E T e Sanaa T E nena a 13 EVO E 14 Hj TE 17 ENE 1i EE 18 Advan ed Seine Secce e ne E Ceci onum Po Osee Pie RUE 18 CN 18 DEENEN 18 USEF ACCOUN TAA AEN 19 Time SEUNG S ae ce scree M 20 ee 20 Copyright 2015 TRENDnet All Rights Reserved LA I Se UIE genee 21 ale eut ER INRA io Sec C
34. Video Format Audio Display Settings OSD Settings Text Overlay Video Recording Events Stream Type Video Encoding Resolution Bitrate Type Video Type Video Quality Frame Rate Max Bitrate Profile I Frame Interval PTZ Main Stream Normal Y 1920 1080P Video Stream Medium 0 v frames per second 3072 Kbps Main Profile Video Format Stream Type Select Main Stream Normal or Sub Stream Video Encoding Choose the video stream you want to modify Main stream supports H 264 only Sub Stream supports H 264 and MJPEG Wegen tes H 264 H 264 MJPEG 28 TRENDnet User s Guide TV IP430PI mM 1280 720P EE Interval here The default is 60 1920 1080P 3527240 Aleit Click Save to save the changes Bitrate Type Choose between variable bit rate or constant bit rate for video compression The default is variable rate Audio Variable Adjust the audio settings for the camera Constant Video Quality Choose the video quality The default is medium quality Audio Encoding UK ineln System Volume CU o X Medium DM Environmental Noise Filter Higher Highest a NL NN Video Format Frame Rate Choose the capturing frame rate The default value is 30 Audio frames per second Reduce the frame rate to reduce the ON capture file size Text Overlay Video Recording Audio Audio Encoding G 711ulaw G 711alaw MP2L2 and G 726 o ee
35. Wide Dynamic Range technology Recording Schedule Define a weekly recording schedule IPv6 IPv6 support TRENDnet User s Guide TV IP430PI ONVIF Warnings ONVIF compliant e Itis recommended to use the PoE injector or an IEEE 802 3at compliant PoE switch e Ifthe product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the camera yourself Disassembling Complimentary pro grade software to manage up to 32 TRENDnet cameras the product will void the warranty and may cause harm or injury e The installation should be done by a qualified service person and should conform to all construction and electric regulations and other local codes Complimentary Software Complimentary Apps Live video to a mobile device with free iOS and Android apps Cautions e Make sure the power supply voltage is correct before using the camera Cables e Do not drop the camera or subject to physical shock e Do not touch sensor modules with fingers If cleaning is necessary use a clean cloth with a bit of ethanol and wipe it gently If the camera will not be used for an extended period of time put on the lens cap to protect the sensor from dirt e Do not aim the camera lens at the strong light such as the Sun or an incandescent Connectors for AC power adapter d e Not required when PoE e we lamp Strong light can damage the camera sensor injector is included QY mm Ne e
36. account please still enter a random FTP Server user ID and password before saving PTZ y Enter the user name if the network storage requires authentication Leave it blank if no Password Enter the password to access the network Enable Snapshot to FTP Check this box if you want to store snapshots on storage the FTP ERR Network Tip To create network storage on your Windows Server Address Enter the FTP server IP address il Computer based system create a shared folder and then o Port Enter the service port number of the FTP server A e test your set up with another computer Enter the User Name Anonymous Check Anonymous if the FTP server does not E condi IP address of the computer here and enter the require authentication Enter the User Name if shared folder name with a leading forward slash the FTP server requires authentication A Users For example if you have a shared folder named Enter the password of the FTP account SMB enter SMB in the File Path Confirm Enter the password again to make sure the Click Save to save the changes password was entered correctly Directory Structure When saving snapshots on an FTP server they can be saved in a single place or organized with Copyright 2015 TRENDnet All Rights Reserved 45 TRENDnet User s Guide TV IP430PI meaningful directory names Save in root directory You can choose to store all files in the same folder of FTP login S
37. all the presets and set them as the limits for the camera 3 Click Set to save the limits and Clear to clear the limits 47 TRENDnet User s Guide TV IP430PI Initial Position Park Action Set the camera initial position you can also call a preset for the position Click Set to The feature allows the camera to start at a predefined park action scan preset pattern save the limits and Clear to clear the limits automatically after a period of inactivity park time Scheduled Tasks function has higher priority over Park Action function therefore when i mn two functions are set at the same time Scheduled Tasks function takes effect ars Mi wx STT 9459 COTES Enable Park Action wj Park Time DEN second Action Type Frame Scan Random Scan Patrol Preset 1 din Preset 2 HE ML ey il Preset 3 d LI E Preset 4 Preset 5 Panorama Scan Basic Limit Initial Positior Park Action Privacy Mask Scheduled Tasks Initial Position Clear Config Park Action Privacy Mask Scheduled Tasks Clear Config Copyright 2015 TRENDnet All Rights Reserved 48 TRENDnet User s Guide TV IP430PI Private Mask Schedule Tasks Create masking area to keep your privacy You can create up to four independent You can configure the camera to perform a certain action automatically in a user masking areas by clicking and dragging on the screen defined time period wj Enable Privacy Mas
38. anoveniaSmernice 2004 108 ES TRENDnet vakuuttaa t ten ett TV IP430PI tyyppinen laite on direktiivin 2004 108 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar TRENDnet att denna TV IP430PI star verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 2004 108 EG 54 TRENDnet User s Guide TV IP430PI Limited Warranty TRENDnet warrants its products against defects in material and workmanship under normal use and service for the following lengths of time from the date of purchase TV IP430PI 3 Years Limited Warranty AC DC Power Adapter Cooling Fan and Power Supply carry 1 year warranty If a product does not operate as warranted during the applicable warranty period TRENDnet shall reserve the right at its expense to repair or replace the defective product or part and deliver an equivalent product or part to the customer The repair replacement unit s warranty continues from the original date of purchase All products that are replaced become the property of TRENDnet Replacement products may be new or reconditioned TRENDnet does not issue refunds or credit Please contact the point of purchase for their return policies TRENDnet shall not be responsible for any software firmware information or memory data of customer contained in stored on or integrated with any products returned to TRENDnet pursuant to a
39. ave in directory Structure your folders with camera name or IP address Directory Use Camera Name Use the camera name to BASIC PARAMETER organize the saved files i Enable Proportional Pan Use Camera IP Use the camera IP address to d Preset Speed organize the saved files Keyboard Control Speed Click Save to save the changes Auto Scan Speed bad NJ N z as Ai eg 3 D lt lt lt lt Max Tilt angle Degree o lt Auto Flip PTZ OSD EIN Always Off GN Always Off arcu Always Off Initial Position Park Action POWER OFF MEMORY Privacy Mask Set Resume Time Point eters Scheduled Tasks Clear Config Enable Proportional Pan If you enable this function the pan tilt speeds change according to the amount of zoom Preset Speed You can set the speed of defined preset from 1 to 8 Keyboard Control Speed Define the speed of PTZ control by a keyboard as m tomar o Auto Scan Speed The camera provides 5 scan modes auto scan tilt a Copyright 2015 TRENDnet All Rights Reserved 46 TRENDnet User s Guide BEND The scan speed can be set from level 1 to 40 Max Tilt angle The maximum angle that the camera can revolve in the tilt direction is adjustable The values range from 0 90 to 5 90 PTZ OSD Set the OSD duration of zooming status as 2 seconds to 10 seconds always on or off Auto Flip You can enable disable the auto flip function PT Status
40. can have moderate video stream smoothness and time delay i Record File Settings Live View Settings Record File Size This size of live view video recording You can choose 256MB 512MB or 1GB a file Smaller file size is good for many short recordings Setup the Live View buffer and the destination of record file or snap shot BASIC Live View Settings Save Record Files to By default files will be saved under your user ane Aa name and under the TRENDnet RecordFiles Click A System SEN LE Browse and choose a new destination if you want Dovico Settings DEE to save the file somewhere else User Accounts 1 i Rene apes epe Ve We Save Download Files to By default files will be saved under your user Daylight Savings n MEI C VUsers Michelle TRENDnet Recordrill 2 name and under the TRENDnet DownloadFiles m nd RI eee a C sers WichelleNTRENDnet Download WM ZEN Click Browse and choose a new destination if you want to save the file somewhere else Maintenance Picture and Clip Settings Picture and Clip Settings hots in eve v 3 Save snapshots in live view to C Users Michelle TRENDnet Snapshot Browse Save Snapshots im iive view By default files will be saved under your user EENEG ame C Users Michelle TRENDnet PlaybackP Browse to name and under the TREN Dnet SnapshotFiles D H Seefe C Users Michelle TRENDnet Playback vc Click Browse and choose a new destination if you want to save th
41. cted In this mode the camera s IP Address may change To find the camera s current IP address for future access click the above link For Mac users please download the latest autorun software from http www trendnet com downloads camera mac WebComponents zip or use the files on the CD to install the camera 10 Click Finish to exit the program or click Home to return to the main screen You can also download a free app to view video on your mobile devices Scan the QR code to find and install the TRENDnetVIEW app Congratulations The camera is now ready to be installed in its final location Thank you for choosing TRENDnet Please install video streaming plug in when you are prompted by the web browser Mobile App Please take a moment to download our free TRENDnetVIEW App Scan the QR codes or search for TRENDnetVIEW in the Apple App Store or at Google Play for Android devices Android Copyright 2015 TRENDnet All Rights Reserved System Management and Default Settings It is recommended that you install your camera with the CD that comes with the package and use accompanying TRENDnetVIEW Pro software for Windows computers If you do not have the CD with you please go to and enter the model number and download the software If you didn t go through the CD installation wizard or you have reset the camera your camera has following settings Management IP 192 168 10 30 or a dynamic assigned IP
42. e CMOS sensor The camera images are noisy Often if the camera is in a low light environment the images can contain a lot of noise Try enabling Night mode and see if that improves the image quality Otherwise try to use the camera in a location where there is a bit more light source Video can t be viewed through the web browser interface ActiveX might be disabled If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options menu You may also need to change the security settings on your browser to allow the ActiveX plug in to be installed If you are using Internet Explorer with a version number lower than 6 then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Network Camera Try also viewing the video using Java Ensure that you have the latest version of Java installed before you do Go to www java com for more information The camera isn t sending email notifications from my gmail account Google s security settings may prevent the TV IP430PI from accessing your gmail account to send notifications To change the security settings log into your account then click on your account settings Under the Signing in section locate the Access for less secure apps setting and click on it Under the options select Turn on This should allow the camera to send notifications from your gmail account 52 TRENDnet U
43. e Mode Smart IR Video Standard E Day Night Switch Sensitivity Mirror Slow Shutter Slow Shutter Level D WDR D WDR Level Lens Initialization Backlight Control White Balance Digital Noise Reduction Noise Reduction Level Semi auto An e Normal O cn nm z 8 g lt DD DD E O lt Enabled s O Close Auto Track Normal Mode zB A TV IP430PI TRENDnet User s Guide TV IP430PI Exposure Mode Auto Iris Priority Shutter Priority Defog Mode Zoom Limit HLC Manual Once selected you can adjust the Iris and shutter speed from the extended options menu IR Light Mode Auto The iris and shutter values will be adjusted Brightness Limit automatically according to the brightness of the environment Iris Priority Shutter Speed d The value of iris needs to be adjusted manually The Display settings shutter values will be adjusted automatically Use the slider or enter a number 0 100 to adjust according to the brightness of the environment the image sharpness Default 50 Focus Mode Auto allows the camera to focus automatically at m Shutter Priority any time The value of shutter needs to be adjusted manually Manual use the O J icon in the live The iris values will be adjusted automatically view page to control focus manually according to the brightness of the environment Semi auto came
44. e file somewhere else Save snapshots when By default files will be saved under your user playback to name and under the TRENDnet PlaybackPics Click Browse and choose a new destination if you want to save the file somewhere else Copyright 2015 TRENDnet All Rights Reserved 21 TRENDnet User s Guide Save Clips to By default files will be saved under your user name and under the TRENDnet PlaybackFiles Click Browse and choose a new destination if you want to save the file somewhere else Click Save to save the changes Maintenance You can do the camera system maintenance on this page A System Device Settings User Accounts Time Settings Daylight Savings Live View Settings Maintenance Network Video Maintenance Reboot Reset Reset all parameters except the IP parameters and user information to the default Restore all parameters to the default Import Config File Config File Status Export Config File Remote Upgrade Status Note The upgrade process may take a couple of minutes please do not disconnect power to the camera during the process The device reboots automatically after upgrade Copyright 2015 TRENDnet All Rights Reserved TV IP430PI Click this button to reboot this camera Reset all camera parameters except the IP Load complete factory default settings to the Import Config File Config File TO load previously saved configuratio
45. e tento TV IP430PI je ve shod se z kladn mi po adavky a dal mi p slu n mi ustanoven mi sm rnice 2004 108 ES Undertegnede TRENDnet erkl rer herved at f lgende udstyr TV IP430PI overholder de v sentlige krav og vrige relevante krav i direktiv 2004 108 EF Hiermit erkl rt TRENDnet dass sich das Ger t TV IP430PI in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 2004 108 EG K esolevaga kinnitab TRENDnet seadme TV IP430PI vastavust direktiivi 2004 108 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby TRENDnet declares that this TV IP430PI is in compliance with the essential requirements and other relevant provisions of Directive 2004 108 Por medio de la presente TRENDnet declara que el TV IP430PI cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2004 108 CE ME THN l IAPOYZATRENDnet AHAONEI OTITV IP430PI 2YMMOPQONETAI lIPO2 TI OYZIQAEIZ ANAITHZEIZ KAI TI AOINEZ XXETIKEX AIATA EIZ TH OAHTIAZ 2004 108 EK Par la pr sente TRENDnet d clare que l appareil TV IP430PI est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2004 108 CE Con la presente TRENDnet dichiara che questo TV IP430PI conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2004 108 CE
46. en Click and hold the mouse for a desire portion of the live KE Sr WI image then that position will be moved to the center of O Live View H ik d 1 1 Preset 1 the live feed c a N 1 e t Preset 2 cu Is 4 Z Ax d Preset 3 Preset 4 D D SE 2 way Audio Click to enable 2 way audio Preset 6 Preset 7 Preset 8 Double click the picture to view in full screen mode Preset 9 Preset 10 Full Screen Mode Double click again or press escape key on your keyboard Preset 11 Playback Log Ve D N n mn A Ww N e ra eo e to exit full screen mode m Preset 12 at Preset 13 sf The status bar shows the status you are at including enabled the zoom recording video and successfully Multi Language Change your preferred language anytime Status Bar aknea hai To Capture succeed Click this icon to take a video snapshot Ne x Click once to start recording Click it again to stop The icon expands the PTZ control panel Recording recording The status bar will indicate if it is in recording state or not Pan Tilt Zoom control panel 4 Zoomin out Click once to enable zoom Then click and drag the area on the picture to zoom in Click once on picture for 100 G Focus close far zoom Click the icon again to disable zoom The zoom l iris open close function works in full screen mode as well i Speed of pan tile movement Video Stream The camera has two video streams H
47. es 32 time 2 ms Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning properly Please confirm the power for the devices are well connected and functioning properly The camera can be accessed locally but not remotely This might be caused by a firewall Check the Internet firewall with your system administrator The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN For more information please refer to the section about installing your camera behind a router Make sure that the Network Camera isn t conflicting with any Web server you may have running on your network The default router setting might be a possible reason Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN Copyright 2015 TRENDnet All Rights Reserved White vertical lines appear on the image from the camera It could be that the CMOS sensor a square panel situated behind the lens that measures the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights Reposition the Network Camera into a more shaded area immediately as prolonged exposure to bright lights will damage th
48. ew Settings Maintenance Device Time ESSIULEME 2015 01 191 17 16 56 Sync with computer time gy Network Video Automatic Update NTP Server Specify a time server NTP server to synchronize with e g time windows com The time interval that the camera will synchronize the time with NTP server Default 1440 minutes 24 hours Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved Manual Time Sync The system time of this camera Set Time Click the calendar icon and manually select the date Check the Sync with computer time to copy the time from your computer Click Save to save the changes Daylight Savings Setup daylight settings for the camera BASIC Daylight Savings Set daylight savings time English b Enable DST w System User Accounts Time Settings DST Bias Daylight Savings Live View Settings Maintenance Network Video Events Storage PTZ 20 TRENDnet User s Guide TV IP430PI Daylight Saving Live View Parameters Enable DST Live View Buffer Configure the buffer size for live view video E stream With low buffer size setting you can get real time video stream but the video may be stop Eno ime and go if the network is congested With high DST Bias buffer setting you can have smooth video daylight savings streaming but the video is delayed from the time Click Save to save the changes happening Medium size
49. ights Reserved 16 TRENDnet User s Guide TV IP430PI Download snapshots Click this button to download snapshots ch00_08000000000000000 2015 01 26 15 49 15 ch00 08000000000000100 2015 01 26 15 49 25 ch00_08000000000000200 2015 01 26 15 49 35 ch00_08000000000000300 2015 01 26 15 49 45 ch00_08000000000000400 2015 01 26 15 49 55 Start Time ch00_08000000000000500 2015 01 26 15 50 05 ch00_08000000000000600 2015 01 26 15 50 15 ch00_08000000000000700 2015 01 26 15 50 25 ch00_08000000000000800 2015 01 26 15 50 35 ch00_08000000000000900 2015 01 26 15 50 45 ch00_08000000000001000 2015 01 26 15 50 55 ch00_08000000000001100 2015 01 26 15 51 05 cho0_08000000000001200 2015 01 26 15 51 15 ch00_08000000000001300 2015 01 26 15 51 25 ch00_08000000000001400 2015 01 26 15 51 35 ch00_08000000000001500 2015 01 26 15 51 45 ch00_08000000000001600 2015 01 26 15 51 55 ch00_08000000000001700 2015 01 26 15 52 05 ch00_08000000000001800 2015 01 26 15 52 15 ch00_08000000000001900 2015 01 26 15 52 25 ch00_08000000000002000 2015 01 26 15 52 35 ch00_08000000000002100 2015 01 26 15 52 45 ch00_08000000000002200 2015 01 26 15 52 55 ch00_08000000000002300 2015 01 26 15 53 05 ch00_08000000000002400 2015 01 26 15 53 15 ch00 08000000000002500 2015 01 26 15 53 25 ch00_08000000000002600 2015 01 26 15 53 35 ch00_08000000000002700 2015 01 26 15 53 45 ch00 08000000000002800 2015 01 26 15 53 55 ch00_08000000000002900 2015 01 26 15 54 05 ch00_08000000000003000 2015 01 26
50. ks pasic ADVANCED Enable Scheduled Task gy M mE second Timing Tasks Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Initial Position Park Action Initial Position Park Action Privacy Mast Scheduled Tasks Privacy Mask Scheduled Tasks Clear Config Clear Config Enable the Scheduled Task define the Park Time and Edit the Tasks that you would like M Giktsbutonioad themak Click this button to delete the mask Copyright 2015 TRENDnet All Rights Reserved 49 TRENDnet User s Guide TV IP430PI Timing Tasks Clear Config You can clear PTZ configurations all at once in this section select the desire function and click Mon Tue Wed Thu Fri Sat Sun Save to clear OAIl Day Auto Scan E Customize Period Start Time End Time Task Type Task Type ID Select All E 1 00 00 24 00 Auto Scan ei TUNES 2 00 00 00 00 Auto Scan Y il 3 00 00 00 00 Auto Scan v eI 4 00 00 00 00 Auto Scan Y Clear All Patterns g 5 00 00 00 00 Auto Scan e SEET 6 00 00 00 00 Auto Scan e SEENEN 7 eae EE S S Clear All Scheduled Tasks gy 8 00 00 00 00 Auto Scan v 9 00 00 00 00 Auto Scan e ZEN 10 00 00 00 00 M Select All Mon Tue Wed Thu Fri Sat Sun Limit Initial Position Choose the day you would like to set the task schedule Park Action Click All Day or Customize to enter the Start Time and End Time for each task Privacy Mask Choose the task type from the drop down list Te Click
51. n NE Many ISPs do not allow service port 25 going through their network Other popular COPY TO ALARM ports are 587 and 465 Please consult your email service provider and ISP for details n NES Copyright 2015 TRENDnet All Rights Reserved 42 TRENDnet User s Guide TV IP430PI Alarm Input No Select the alarm input number Alarm Name Input the alarm name Alarm Type Two alarm types NO for Normally Open and NC Normally Closed Normal Linkage Send Email When the alarm is triggered the camera will send Upload Snapshot When the alarm is triggered the camera will upload Network Storage When the alarm is triggered the camera will upload Audible Warning When the alarm is triggered the camera will have Notify Surveillance Center When the alarm is triggered the camera will send a Trigger Alarm Output Select All Select the Alarm output PTZ Linking Preset No When the alarm input is triggered the camera will Patrol No When the alarm input is triggered the camera will Pattern When the alarm input is triggered the camera will Copy to Alarm Select All Copy the settings to other alarm Note This option is for the camera that has multiple alarm output channels Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved Alarm Output Choose Alarm Input number name and alarm type The alarm type could be NO Normally Open and NC Normally Closed
52. ns click Browse to find the configuration file and then click Import Status Shows the status in loading configuration file Export Config File Click Export to download configuration file The file will be downloaded to the Download folder by default Click Browse to find the latest firmware and then EN Staus Shows the status in firmware upgrade Click Save to save the changes TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your TRENDnet model and version To find out if there is a firmware upgrade available for your device please check your TRENDnet model and version using the link 22 TRENDnet User s Guide TV IP430PI TCP IP Setup your basic IPv4 and IPv6 network settings on this page RES BASIC TCP IP Network Settings Setup your camera to get network address manually or dynamically NETWORK INTERFACE E System Mac Address a Ce Ne A Duplex and Speed Lo MTU TCPAP Port Primary DNS DDNS PPPoE ADSL Secondary DNS SNMP 802 1X IP Address Filter QoS UPnP IPv4 Address DHCP Subnet Mask Default Gateway Events Multicast Address Storage PTZ IPv6 Mode IPv6 Address Prefix Length Default Gateway d8 eb 97 cd 9d f4 1500 192 168 1 249 192 168 1 11 Zei bie a Paa A 192 168 1 254 gt m ct o lt Route Advertisement Y View Rou Copyright 2015 TREN
53. ny warranty There are no user serviceable parts inside the product Do not remove or attempt to service the product by any unauthorized service center This warranty is voided if i the product has been modified or repaired by any unauthorized service center ii the product was subject to accident abuse or improper use iii the product was subject to conditions more severe than those specified in the manual Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase Upon proper submission of required documentation a Return Material Authorization RMA number will be issued An RMA number is required in order to initiate warranty service support for all TRENDnet products Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid insured and packaged appropriately for safe shipment Customers shipping from outside of the USA and Canada are responsible for return shipping fees Customers shipping from outside of the USA are responsible for custom charges including but not limited to duty tax and other fees WARRANTIES EXCLUSIVE IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE THE CUSTOMER S SOLE REMEDY SHALL BE AT TRENDNET S OPTION REPAIR OR REPLACE THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRES
54. o clip and snapshots to your local computer Playback Playback works only when NAS recording was enabled and used Buttons on the Patterns interface Description Start recording a pattern Stop recording a pattern Start Time Status E Call the current pattern Stop the current pattern Delete the current pattern These 4 patterns can be operated separately and with no priority level e When configuring and calling the pattern proportional pan is valid the limit stops and auto flip will be invalid and the 3D positioning operation is not supported 2015 01 18 12 41 58 IET LUTTE UR Command 93 Schedule Motion Manual Copyright 2015 TRENDnet All Rights Reserved 14 TRENDnet User s Guide TV IP430PI Search for video recordings Click the date selection and then choose a date for the date range of your recording Click Search to start searching Time line There is a playback head in the center of the time line represented by a yellow vertical line To look for a specific video recording move the time line by clicking and dragging it If the recording is short zoom in by clicking button cio o to zoom out the time scale If you know the exact time of the day you are looking for click ed then enter the time you want to playback Different types of recordings are identified differently The scheduled recordings are marked in blue and the recordings triggered by moti
55. on detection are marked in red 2015 01 18 12 41 58 du Click and drag the time line to move your time manually Click this button to zoom in the scale Copyright 2015 TRENDnet All Rights Reserved Click this button to zoom out of the scale E3 Click this button to specify a specific time of the day X Set playback time oo Hoo foo then click to confirm selection and then click X to close this dialog box Play video II w WI Use playback controls to play back the video recordings Click to playback video frame by frame Click again for the next frame There are 5 steps of playback speeds You can choose from X 1 2 and 4 times of original speed Click this button to decrease playback speed T5 TRENDnet User s Guide TV IP430PI Take Images from a video playback Download sections of a video You can take snapshots from playback video or make new video clips from the video you To save complete video sections or snapshots you can download the files directly are playing back Click this button to enable zoom Then click and drag on the video to Click this button to download video sections define the area you want to zoom in Click again to get back to 100 ZOOM Double click to show video in full screen and press ESC on keyboard to exit full screen mode o VD OD zl Oh Un 4 AM Fa File Name Start Time End Time File Size Progress chO1 08000000000000013 2015 01 19 12 34 2015 01 19
56. ore than one camera on the network please choose the camera you wish to set up by identifying its MAC address Select the camera and then click Next Select your camera The following cameras were detected on your network Check the MAC address of the IP Camera you are going to setup and select it from the list Model Mac Address e TV IP430PI dd dd dd dd dd dd If you don t see your camera s MAC address confirm that the camera is powered up confirm your computer is connected to your network and then click the Retry button Next TRENDnet User s Guide TV IP430PI 6 Select the DHCP option to assign IP address dynamically or select Fixed IP to 8 Enter a new password The default password is admin You are required to assign the camera an IP address then click Next change the password from the default setting to prevent unauthorized access Select a Connection Option Enter the default password admin and enter the new passwords for a brand Please select a connection option based on your network environment If you do not know new installation The password must be between 8 and 16 characters which connection option to choose select DHCP Alphanumeric a z A Z 0 9 S Change password Select this option if your camera is connected to a router and DHCP is enabled You MUST change the default password of the camera Enter the default password admin Enter your new password must be between 8 and 16 characters
57. orward different data in different priorities The meaning of the value is different in different DiffServ domains Consult your network manager for the setup details BASIC Quality of Service Setup traffic prioritization to smooth video stream English v System A e o Network rz Video Audio DSCP ero rer BR gl Management DSCP H TCP IP DDNS PPPoE ADSL SNMP 802 1x IP Address Filter QoS Video Audio DSCP Enter Video Audio DSCP Default O Event Alarm DSCP Enter Event Alarm DSCP Default 0 ea TRENDnet User s Guide TV IP430PI Management DSCP Enter Management DSCP Default 0 Click Save to save the changes UPnP Universal Plug and Play is a device discovery protocol set It allows your camera to easily be found for example on a Windows operation system EE Enable UPnP e English ACHEN UPNP TV IP430PI 0933004 2 System 2 PORT MAPPING ES Network us Enable Port Mapping e TCPAP Port Mapping Mode Port DDNS PPPoE ADSL SNMP m HTTP 80 Not Valid Protocol Name External Port Status 802 1X IP Address Filter QoS D RTSP 554 Not Valid Check this box to enable UPnP connection Enable UPnP Friendly Name The name that will be appeared when searched Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved Video Format Adjust the format of video BASIC Video Format Network Video
58. oting images with top down position outdoor or next to the e Setup Camera with CD existing light source are good choices Avoid the light source if it creates a e Selecting the appropriate mounting accessories see Mounting Guide shade that darkens the viewing area Plan for Installation Setup Camera with CD 1 Insert the Installation CD ROM into your computer s CD ROM drive to initiate I the Auto Run program Choose your preferred language and then click the Viewing angle Install Camera mounting accessories are not included e The camera is a vari focal camera with a wide viewing range that provides non distorted and detailed images Choose the location where has good angle to shoot the image you expect to see The motion detection area should also be considered when installing the camera Install Camera Install TRENDnetVIEW Pro Software Weather Cond itions Quick Installation Guide User s Guide e The camera is an outdoor dome camera which fits most installations indoor Product How Tos and outdoor The camera can work under a wide range of weather conditions Product Registration y For severe weather conditions Using the camera in milder weather conditions 7 m will help extend the camera s life and preserve the quality of the camera image ole e Outdoor 2 MP Full HD 1080p PoE IR e Moisture Avoid damp or moist environments whenever you can The camera Mini Speed Dome Network Camera TV P430PI is
59. ou can setup up to 32 user accounts to access the camera s video stream with a web browser or real time video stream RTSP Only one administrator account can be setup to configure the camera and cannot be deleted BASIC ADVANCED reene Add Modify English v System USER NAME LEVEL Device Settings admin Administrator Operatori Operator Time Settings Useri User Daylight Savings Live View Settings Maintenance Click Add button to add one user account Select user level as Operator account or user account Operator could configure settings User account could view but could not change any setting To change a user s name and password highlight the user by clicking on it Then click Modify button Administrator can change user s name level and password The administrator s name is fixed you cannot change it Click OK to save the changes 19 TRENDnet User s Guide TV IP430PI Time Settings The accuracy of the system clock is important for scheduling and accurate logging You can synchronize the system time with your computer or automatically check the time accuracy with a network time server NTP server BASIC mr ADVANEED Time Settings Set up the system time for correct scheduling and logging English eee GMT 08 00 Pacific Time US amp Canada 2 System AUTOMATIC UPDATE Device Settings Time Settings Interval 1440 minute s O MANUAL TIME SYNC Daylight Savings Live Vi
60. r Select All Day or Customized schedule of the day Set the time period and the event you want Events Storage to trigger the video recording continuous always recording or motion detection Click Copy to Week if you want the same daily schedule every day Or you can select Video Recording Recording time before trigger event Recording time after trigger event Select Yes to allow older recordings to be overwritten Enable Record Schedule Check this box and then click Save to enable video other day of the week and click Copy to copy the schedule of the day to other days Click another day of the week by clicking on its tab to set the next schedule Click OK when you have finished your settings Click Save to save the changes recording Copyright 2015 TRENDnet All Rights Reserved 35 TRENDnet User s Guide TV IP430PI Motion Detection Set up how the motion detection event will be triggered and what actions will be fe oe UR Motion Detection triggered Enable Motion Detection gy ee BASIC Enable Motion Tracking gy AREA SETTINGS Motion Detection Enable Motion Detection gs Ri Er aG Lo English v System ect Enable Motion Tracking mw ro Cis AN Events Motion Detection AREA SETTINGS me n lane Ai 06 30 30 Events la D F ds v M xo I wm A 1 V r i Network T i NN f E 4 SUN iip Video Tamper s
61. ras focuses only once after pan tilt zoom Manual 1 180 SEM auto 1 250 1 350 1 500 distance The value can be set to 1 5m 3m 6m i 725 1 1000 10cm and 50cm 1 1500 1 2000 1 3000 1 4000 1 6000 1 10000 1 30000 Minimum Focusing This function is used to limit the minimum focus INFINITE Copyright 2015 TRENDnet All Rights Reserved 31 TRENDnet User s Guide Video Standard Day Night Switch Sensitivity Adjust the light sensor sensitivity This is the base frequency for the video refresh rate It is recommended to set to the same frequency of your local video standard NTSC 60 PAL 50 Default 60Hz 60nz Choose whether you want the camera to be set to the day mode color video or night mode IR enhanced black white video You can manually set it to day mode or night mode adjust by lighting Auto or pre define schedule Day The speed dome displays color image It is used for normal lighting conditions Night The image will be black and white Night mode can increase the sensitivity in low light conditions Auto In Auto mode the day mode and night mode can switch automatically according to the light condition of environment Select from OFF or ON option to set the correct direction of the camera view This function can be used in underexposure condition It lengthens the shutter time to ensure full exposure The slow shutter value can be set to Low Normal and High
62. rids represent the detection area WR Cap reen Fee Et pere Ee Sensitivity Move the slider to adjust detection sensitivity emm Clear All Click this button to clear all the set up areas 1 00 00 ik 24 00 00 00 2k 00 00 00 00 zk 00 00 00 00 zk 00 00 00 00 2k 00 00 00 00 00 00 ARMING SCHEDULE 00 00 ii 00 00 00 00 ck 00 00 Select All v Mon Tue Wed Thu ip Sat Sun Select day of the week you want to edit the schedule Set the time period you want to enable motion detection Default is 0 24 hours all day Click Copy to Week if you want the same daily schedule every day or you can select NOTIFICATION other day of the week and click Copy to copy aoe Ere cir the schedule of the day to other days Select another day of the week by clicking on its tab to set next schedule Click OK when you finished your setting TRIGGER ALARM OUTPUT Notification select All W g A gt 1 Check this box to send an e mail notification when motion is detected Go to Events Email to setup Save jJ email account information Upload Snapshot Check this box to send snapshots to an FTP server or Upload Snapshot g Network Storage mj k Copyright 2015 TRENDnet
63. rlay Video Recording Events Enable Text Overlay Storage PTZ Text Overlay Check Box Check this box to enable text overlay Text Field Enter the text you want to display You can enter your local language if you want The text field allows maximum 44 English letters or 20 non English characters Click Save to save the changes Copyright 2015 TRENDnet All Rights Reserved 34 TRENDnet User s Guide TV IP430PI Video Recording Click Edit to edit the recording schedule Edit Schedule Mon Tue Wed Thu Fri Sat Sun CAII Day Continuous Video Recording Customize Pre record Post record E System Overwrite Period Start Time End Time Record Type 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous 00 00 00 00 Continuous Select All Wed Thu Network W Enable Record Schedule On Oh uU fh WN ra Video Continuous Video Format Audio w Motion Detection Display Settings H H H H HH H H H H H H H H2H H H H HHH H H HH Alarm OSD Settings A LO HH Kai HAHA HE IHHBHH Motion Alarm IHE IHE HARARE Inr Select day of the week you want to edit the Text Overlay HH AH M HEHLLL LALLALELLALOLALLLELALOLLLI RW Motion amp Alarm Video Recording schedule E Othe
64. s Guide TV IP430PI OK l Pattern 4 Click to save a preset into the patrol 5 Repeat the steps from 3 to 5 to add more presets A pattern is a memorized series of pan tilt zoom and preset functions A pattern can amp Click E to save all the patrol settings be called in the pattern settings interface There are up to 4 patterns available for customization Calling a Patrol route Configure a Pattern In the PTZ control panel select a defined patrol from Path 01 H and click E to call the patrol 1 Inthe PTZ control panel click d to enter the pattern settings interface al CA Ki i S el 2 Select a pattern number from the list as shown in Error Reference source not Paho OnE e found 1 Presetl 15 1 32 Preset 15 1 Ier Paten 1 O O 2 B6 Pattern 2 Pattern 3 5 Pattern 4 Buttons on the Patrol interface 3 Click to enable recording the panning tilting and zooming actions Save a patrol 4 Use the PTZ control buttons to move the lens to the desired position after the information of PROGRAM PATTERN REMAINNING MENORY Call a patrol Stop a patrol e Pan the speed dome to the right or left Buttons 00 a G e Zoom in or out Delete all the presets in the selected patrol path Copyright 2015 TRENDnet All Rights Reserved 13 TRENDnet User s Guide TV IP430PI 5 Click to save the pattern settings Playback You can playback the video recording on the network storage and download the vide
65. ser s Guide TV IP430PI Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorientor relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference
66. ssword k d Click Run to install the plug in admin Note for Mac systems the plug in file is stored on the CD or you can download the esesesse latest version from Remember my credentials http www trendnet com downloads camera mac WebComponents zi If the camera was not setup through the CD and you are accessing it the first time you will be prompted to change password automatically Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI 4 Click Next to install the plug in 6 Openthe browser and login again Allow the plug in from TRENDnet if prompted The Live View page will show and begin streaming video BASIC ADVANCED Live View Double click the image to view in full screen English v Live View Click Next to continue or Cancel to exit Setup 5 Click Finish to finish the installation Setup has finished installing Web Components on your computer Click Finish to exit Setup Copyright 2015 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP430PI Switch to view the different video streams by clicking Basic Settings this icon Live View After you log in into the camera management page you ll see the Live View page u y B B d PS Click the position of the live video the corresponding BASIC ADVANCED Live View Wee position will be moved to the center of the live feed Double click the image to view in full scre
67. tication Password Specify the authentication password between 8 to EAPoL Choose version 1 or 2 This version number Copyright 2015 TRENDnet All Rights Reserved Password 26 TRENDnet User s Guide must matches to your 802 1X service EAPOL version Click Save to save the changes IP Address Filter Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera BASIC ADVANCED IP Address Filter Enable ew k English E System E ao Metwork EI IP Address Filter Type Je m em EM um uu NO PPPoE ADSL SNMP IP Address Filter Enable IP Address Filter Check this box to enable IP address filtering service IP Address Filter Type Choose deny to ban the listed IP addresses or Allow to allow listed host to access this camera pd Click Add to add a user account To modify an entry on the list highlight the entry by clicking on it Then click the Modify button Copyright 2015 TRENDnet All Rights Reserved TV IP430PI Enter the IP address then click OK Modify IP Address Delete To delete an entry on the list highlight the entry by EN Cou Click Save to save the changes QoS Quality of Service Setup traffic prioritization to help smooth out the video stream You can set the Differentiated Services Code Point DSCP bits on outgoing data streams The QoS capable network device will f
68. tion This camera name will also be recognized by other network camera software as the name of this camera OSD On Screen Display the camera name is setting up here as well BASIC Device Settings Setup your camera name and location for easy identification English NAME 2 System lew TV IPA30PI Device Settings Location 050 User Accounts Time Settings Add or remove security authentication Daylight Savings Live View Settings AUTHENTICATION Maintenance RTSP Network HTTP Video SERVICE Events Enable Telnet PTZ Camera Name Name of the camera The camera name setup here can be discovered by other network camera software and OSD On Screen Display The default is the camera s 18 TRENDnet User s Guide TV IP430PI BEEN Label where you installed this camera Authentication Camera s video stream can be accessed with RTSP Real Time Streaming Protocol Only the administrator and users can view this video stream Un checking this box will allow everyone access to this video stream without authentication Default checked Camera can be accessed via password protected web management interface Un checking this box will allow anyone to access this camera and change its settings Default checked Enable Telnet Camera embedded Telnet service for multiple camera control for system developer Default disable Copyright 2015 TRENDnet All Rights Reserved User Accounts Y
69. tters community for read only access SNMP Other Settings Write SNMP Community Specify the password for access to the SNMP Trap Address Specify the IP address for the SNMP trap Trap Port Specify the port number for the SNMP trap Trap Community Specify the name of SNMP trap community Setup 802 1X for remote authentication service SNMP V3 rn BASIC I Enable SNMPv3 Check this box to enable SNMP v3 management 802 1X Authentication Setup 802 1x Remote Authentication Services Read User Name SNMP v3 member user name omg Security Level Choose one of the security levels J X System Enable IEEE 802 1X E EAPOL version Authentication only a Network User Name E Privacy onl y L TCP IP Authentication Algorithm Choose the authentication method to verify the Port ae source of information MD5 or SHA PPPoE ADSL Authentication Password Specify the authentication password between 8 to SNMP NEN 32 letters B IP Address Filter Private key Algorithm Choose the privacy key to encrypt SNMP messages Qos DES or AES Private key Password Specify the privacy key between 8 to 32 letters Write User Name SNMP v3 manager user name 802 1X Authentication EE Enable IEEE 802 1X Check this box to enable 802 1X authentication Authentication Algorithm Choose the authentication method to verify the EN source of information MDS or SHA EAPOL version Extensible Authentication Protocol EAP over LAN Authen

Download Pdf Manuals

Related Search

Related Contents

Apollo SL70 Installation Manual  Punto de acceso Dell PowerConnect W-AP68 Guía  Philips Headband headphones SHL5800  osaka - tsf300    UC0829_3 - Portal Todo FP    Insecticides  Bosch Power Tools ROTOZIP RZ18V User's Manual  mod. Visual 2000 kg - Virgilio Siti Xoom  

Copyright © All rights reserved. Failed to retrieve file