User`s Manual MAGNER
Contents
1. Print out the Denomination Information CURRENCY Select Currency START STOP Counting stop or restart MODE Select Different Operation Mode RED LED Notes on the Rejecter FUNCTION Enter User Mode GREEN LED Notes on the Stacker CLEAR C Exit the menu and clear errors L 1500 User s Manual 3 Details of Number Key 1 USD Key Press and hold down 2 EUR Key Press and hold down 3 Local Currency Key Press and hold down Key and select Local mode 4 ERROR Key Press and hold down Key and select ERROR report It displays the detailed information of Unfit amp rejected notes L 1500 User s Manual Key and select USD Currency Depending on the Currency this key may not work Key and select EUR Currency Depending on the Currency this key may not work ERROR REPORT Soil 1 Corner 1 Tear Tape 1 Stain 0 Hole mm ETC Unfit Total Reject Total PRINT KEY7 EXIT C USD VALUE LIST 5 TOTAL Key Press and hold down Key and select Total Value List It displays the denomination information of counted notes EXIT C 6 PRINT Key Press and hold down Key and select Print It prints out the denomination information of counted notes In addition as an option Serial Number of banknote can be printed out 7 SAVE Key Press and hold down Key and save the data in User or Service or Technical Mode It saves the changed setting in memory 8 BAT Key2. In this mode it can recognize and detect USD Depending on the Currency this mode may not work 2 EURO Mode Press key and select EUR currency Press key and select Operation Mode In this mode it can recognize and detect EUR Depending on the Currency this mode may not work 3 Local Mode Press key and select LC TL RUB GBP MXN SAR INR etc currency Press key select Operation Mode In this mode it can recognize detect Local L 1500 User s Manual 6 3 Operation Mode 1 Count Mode Press MODE key and select Count Mode It count the all currencies without recognition and detection 2 MIX Mode Press MODE key and select Mix Mode It count the all denomination of selected currency 3 SP Mode SP Denomination Mode Press MODE key and select SP Mode It sorts out the same denomination as first inserted note or pre selected denomination by UP DOWN v Key L 1500 User s Manual 400 000 ADD 100 000 4 FACE Mode FACE DEN Mode Press MODE key and select FACE Mode It separates front side or rear side of the notes of all denominations or first inserted note by UP DOWN v Key Depending on the Currency this mode may not work 100 000 ADD 5 ORIENT Mode ORIENT DEN Mode gt ORIENT Press MODE key and select ORIENT Mode It separates different dire
3. Press and hold down Key and select BATCH Number It selects Batch number which was selected already 10 20 50 100 by pressing E Key each time 100 000 ADD L 1500 User s Manual 9 ADD Key Press and hold B Key and select ADD Mode It accumulates all counted notes 100 000 ADD 10 SERVICE Mode Key Press and hold down Key and select SERVICE Mode Password is necessary and strongly recommend to use only with Service Engineer 11 TECHNICAL Mode Key Press and hold down Key and select TECHNICAL Mode Password is necessary and strongly recommend to use only with Service Engineer L 1500 User s Manual 10 6 6 1 Self Diagnosis After turning on the power of machine the self diagnosis will be done as follows Loading Software Loading Software MAIN LX7MA EU1 F1 01 IMAGE LXTIMG EU1 01 01 1 Software Loading 2 During Software Loading each software version will be displayed Checking Sensors amp Motors Test OK MAIN LX7MA EU1 F1 01 MAIN LX7MA EU1 F1 01 IMAGE LX7IMG EU1 01 01 IMAGE LX7IMG EU1 01 01 3 After software loading successfully Sensor amp Motor 4 If everything is OK Test message will show up function will be checked However if error is happened during initializing the related error message will show up 6 2 Denomination Mode 1 USD Mode press 2 key and select USD currency key and select Operation Mode Press
4. Doubl Chain ASN Half Face amp Ort Denom Issue UV MG IR L 1500 User s Manual Check the condition of rejected note as Double Double notes Check the gap between Feed and Reverse Roller Check the condition of rejected note as Chain Chain notes Check the gap between Feed and Reverse Roller Check the condition of Encoder Sensor in Service Mode Check the condition of rejected note as Skew Skew notes Check the gap between Feed and Reverse Roller Check the rejected note condition as Half Half notes Check the condition of Count Sensors in Service Mode Check the rejected note condition as Face amp Ort Adjust CIS Sensor Different Face or Orientation Check the rejected note condition as Denom Adjust CIS Sensor Different Denomination Check the rejected note condition as Issue Adjust CIS Sensor Different Issue UV Error Check the condition of rejected notes MG Error Restart counting operation IR Error 20 DISPLAY CAUSE OF ERROR POSSIBLE SOLUTION 12 13 14 15 16 17 18 19 20 21 22 23 Soil Stain Oil De Ink Hole Tear Corner Vid Graf Old V Time1 amp Time2 Reco Image T1 Image R3 amp R4 L 1500 User s Manual Soiled Notes Stained Notes Oiled Notes De Inked Notes Hole Notes Tear Notes Corner Folded Notes Visual RUB Only Graffiti RUB Only Old Versio
5. NTING will be inactivated Press Key to save the data before exit the setting L 1500 User s Manual 17 2 FIT SETTING USER MODE USER MODE 7 COUNT AUTO 7 COUNT AUTO 8 SPEED 1200 8 SPEED 1200 9 USER I F NONE 9 USER I F NONE 10 FIT SETTING MANUAL 11 FIT SETTING CB STANDARD UP 4 DOWNI v SEL START STOP UP 4 DOWN v SEL START STOP RUNS ENG FIT SETTING 1 CB STANDARD OFF Denom Soil Tear Corner Hole Tape 5 5 5 5 5 5 5 5 5 5 5 5 5 500 5 UP 4 DOWN v SEL START STOP UP DOWNIv SEL START STOP SAVE KEY8 EXIT C SAVEIKEY8 EXIT C The details setting for the Highlight can be changed by pressing UP 4 DOWN v Key Press Key to save the data before exit the setting L 1500 User s Manual SETTING 1 CB STANDARD OFF Denom Soil Tear Corner Hole Tape UP 4 DOWNIv SEL START STOP SAVE KEY8 EXITIC FIT SETTING UP 4 DOWNIv SEL START STOP SAVE KEY8 EXITIC L 1500 User s Manual Each Fit Setting Level can be set from 0 10 0 mean OFF 10 means the most sensitive setting The detail setting of each level can be adjusted in Technical Mode CB Standard is setting for Central Bank Test Setting Standard It is fixed setting but the detail setting of each level can be adjusted in Technical Mode After CB Standard is ON the Manual Setting will be inactivated 7 Error Code n DISPLAY CAUSE OF ERROR POSSIBLE SOLUTION 10
6. PRELIMINARY L 1500 User s Manual MAGNER 1 2 3 4 5 6 7 8 9 lt Contents gt Safety Instruction Appearance Structure Display Description Operation Panel Operation Error Code Accessories amp Options Specification 10 Sensor Location 1 Safety Instruction 1 CAUTION Never disassemble the machine except the trained person Be careful not to pinch your finger when closing the Upper amp Rear Cover Use the voltage between AC100V and AC240V Turn off the machine during cleaning and do NOT use flammable gas spray for cleaning 2 WARNING Do not touch the machine or the power cable with a wet hand Do not operate the machine if smoke or strange smell is detected from the machine In this case please contact your local distributor Always keep clothes hairs and fingers out of the feed hopper area UV RADIATION Eye and skin protection during servicing L 1500 User s Manua 2 L 1500 User s Manual Hopper Guide Upper Cover Lower Cover Carrying Handle Hopper LCD Display Operation Panel Cover Open Button o Stacker Thickness Dial Upper Rear Cover Interface Connector Inlet Power Switch Lower Rear Cover 3 Structure 1 How to open upper cover Press open button and lift it to open the upper cover 2 How to close upper cover Lift the upper cover a litt
7. ational com email magner magnerinternational com 24
8. ction notes of all denominations or first inserted note by UP 4 DOWN v Key Depending on the Currency this mode may not work 100 000 ADD 6 FIT Mode FIT DEN Mode Press MODE key and select FIT Mode It separates Fit notes of all denominations or first inserted note by UP 4 DOWN v Key Depending on the Currency this mode may not work 100 000 ADD L 1500 User s Manual 14 7 OCR Mode Option Press MODE key and select OCR Mode It prints out the serial number of all denominations Depending on the Currency this mode may not work The Printing Option is available in User Mode L 1500 User s Manual 400 000 ADD 6 4 User Mode 1 Press Key to enter User Mode 2 Move the next content by pressing UP DOWN 4 v Key mark is showing the present selected content and then press Key to choose the content or press Key to exit the mode 3 After choosing the content the target content will be highlighted in yellow color 4 After changing the data press the J Key to save them otherwise the data will remain unchanged CONTENTS DESCRIPTION DEFAULT SETTING REJECT SIZE Set Maximum Reject note capacity from 10 to 100 Set the External Device between External Display and Printer 2 F r ICE Refer to the detail setting EXT DISPLAY1 Set the Density Level from 4 to 9 or AUTO for Count Mode ONLY 3 DENSITY d AUTO Lower value is less sensitive and higher va
9. le by left hand and pull the lift lever forward and then fall down the upper cover slowly Be careful not to pinch your finger 3 How to open rear cover Hold and lift the lever to open the rear cover L 1500 User s Manual 4 Display Description Operation mode Currency Batch Auto or Manual Start REJECT Number of notes on Reject Number of notes on Stacker Total Value Speed ADD COUNT MIX A amp sP V SP SFACE 2 2 ORIENT L 1500 User s Manual Count all currencies without recognition and detection Count all denomination of selected currency Sort out the same denomination of first inserted note or specific denomination Sort out the old and new version of specific denomination Separate front side or rear side of the notes of first inserted note or specific denomination Separate different direction notes of first inserted note or specific denomination 5 Operation Panel Number Key is used for Batch Key and also when press and hold down each key user can enter each function 1 Number Key maar Select USD if available SAVE Save the Function Setting in Memory Q Select EURO if available BAT Select Batch Number LC Select Local Currency 0 ADD Accumulate all Counted Notes ERROR Display the Error Information A UP Enter Service Mode Password Necessary TOTAL Show the Denomination Information v DOWN Enter Technical Mode Password Necessary
10. lue is more sensitive setting 4 LANGUAGE Set the Language shown in Display ENGLISH 5 CF DISP Set the CF display function as ON or OFF ON 6 REJECT DISP Set the reject No display function as ON or OFF ON 7 COUNT Set the counting start function as Automatic or Manual AUTO 8 SPEED Set the counting speed of machine 1000 9 USER I F Set the PC Interface NONE or USER1 NONE 10 FIT SETTING Set the Fitness level setting Refer to the detail setting CB Standard L 1500 User s Manual 16 5 Detailed Setting of EXT DEVICE amp SETTING 1 EXT DEVICE EXT DEVICE EXT DEVICE 1 2 EXT DISPLAY2 OFF 3 OCR PRINT MANUAL 4 PRINTER OFF 1 EXT DISPLAY1 ON 2 EXT DISPLAY2 OFF 3 OCR PRINT MANUAL 4 PRINTER OFF UP A DOWN v SEL START STOP UP 4 DOWN v SEL START STOP SAVE KEY8 SAVE KEY8 EXIT C USER EXT DISPLAY 1 1 Line External Display ON or OFF EXT DISPLAY 2 2 Line External Display ON or OFF 1 REJECT 50 2 EXT DEVICE EXT DISPLAY1 OCR PRINT AUTO or MANUAL 3 DENSITY AUTO COUNT ONLY Printer Set ON or OFF Pri Baud Rate 9 600 115 200 bps Default Setting 115 200 Paper Size 2 or 3 inch Default Setting 2 inch UP 4 DOWNI v SEL START STOP Printing No 1 3 pcs Default Setting 1 pc The details setting for the Highlight can be changed by pressing UP 4 DOWN v Key If Printer is OFF the BAUD RATE amp PAPER SIZE amp PRI
11. n INR Only Processing Time Delay Error Recognition Error Image Error Check the condition of rejected notes Restart counting operation Check the condition of rejected note Check the condition of rejected note Check the gap between Feed and Reverse Roller Clean CIS Sensor 21 8 Accessories Options 1 Accessories NAME Quantity 1 Power code 1 set 2 User s Manual 1 set 2 Options 1 External Display 2 Thermal Printer 2 or 3 inch 9 Specification 1 Stacker amp 1 Reject Adaptable currency USD EURO or Local Currency Counterfeit detection UV FL MG MT IR 1 000 notes min Piece count 1 000 notes min Detection Speed 700 notes min Fitness Hopper Capacity 500 sheets Reject Capacity Max 100 sheets Stacker Capacity 300 sheets AC 110 240V 50 60 Hz Power Consume 110W 284 W x 315 D x 277 H mm gt TD D A LCD Size 3 2 Inch TFT Color Touch Screen Fit Mix SP Orient Face Count L 1500 User s Manual 10 Sensor Location wp e e Lo formes CCS 3 Stacker Sensor 9 SENC amp MENC Encoder Sensor Others LIMIT SW Cover Open Switch L 1500 User s Manual MAGNER Magner International Corp 2901 SW 149th Ave Suite 100 Miramar Florida 33027 Tel 1 954 342 6000 Fax 1 954 342 6000 http magnerintern
Download Pdf Manuals
Related Search