AVA-12ef(s)4 AVA-12ef(s)2
Contents
1. 116 elsktronik Converters with embedder 16 CHANNEL 2 SOURCE INPUT 1 INPUT 2 INPUT 3 17 INPUT 4 CHANNEL 2 LEVEL 6 00 dB 0 00 dB 6 00 dB 18 CHANNEL 2 POLARITY mee INVERT 19 CHANNEL 3 SOURCE INPUT 1 INPUT 2 INPUT 3 20 INPUT 4 CHANNEL LEVEL 6 00 dB 0 00 dB 6 00 dB 21 CHANNEL 3 POLARITY INVERT 22 CHANNEL 4 SOURCE INPUT 1 INPUT 2 INPUT 3 23 INPUT 4 CHANNEL 4 LEVEL 6 00 dB 0 00 dB 6 00 dB 24 CHANNEL 4 POLARITY nee INVERT 25 SETTINGS SAVE MEM 1 4 Loap MEM 1 4 FACTORY The bold options are the factory default settings 1 INPUT This menu is used to select the incoming signal The options are CVBS YC YUV Betacam RGB The factory setting is CVBS Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Menu Input Once you have selected the option press the MENU BACK button Option is temporarily saved AVA Sams elektronik Sams sams rs www sams rs 21 aar mS elektranik Converters with embedder 2 HORIZONTAL VERTICAL BLANKING This menu is used for pass remove information that is contained in the horizontal and vertical blanking Choose one of options PASS ALL allow all the information contained in the horizontal embedded audio and vertical blanking from 6 to 22 lines KILL ALL remove all information contained in the horizontal and vertical blanking2. 6 Bim ede MODULE INSTALATION IN SRU RACK 11 BACK CONNECTOR TC 13 DE C 14 PCB WITH THE LAYOUT BEEIMEBIN VEL LEN GENE 15 INSTALLATION STANDALONE 16 THE DEVICE 17 ERRORS WITH CONNECTIVITY AND STATUS 18 EIS SIRE ceesre E E E EEE EE EEEE 19 EEEE EE AA EAE EEE E N 19 MENOU rdc E EE 20 L INPUT EEEE EREA EEEE EEEa 21 2 HORIZONTAL VERTICAL BLANKING 22 3 HORIZONTAL 22 d VERTICAL POSTION 22 2 ERROR MODE c 23 eso LEVEE 23 Fe OPO 23 O gt ctanensceeeeseuatendcenssiceecscaansauaransechauannededodenscecnedasendcauescseceecacatucdnarnrseesiasaaueidenenenst 24 24 10 24 AGG MODE
3. The factory setting is PASS ALL Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN E Menu HV Blank Once you have selected the option press the MENU BACK button Option is temporarily saved 3 HORIZONTAL POSITION This menu is used to adjust the horizontal phase of the output video signal Horizontal phase shifts in the intervals 37ns half of one pixel up to a maximum of one video line 63 96315 During change in value it may cause short term image disturbance in monitor due to transition to a new time The factory setting is 0 000us Select an option by pressing the UP DOWN keys OK SAVE uP MENU BACK DOWN aE Menu Horisontal position Once you have selected the option press the MENU BACK button Option is temporarily saved 4 VERTICAL POSITION This menu is used to adjust the vertical phase of the output video signal The vertical delay is adjusted in increments of one video line from 0 up to the 624 The factory setting is 0 lines Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK u DOWN BE Menu Vertical position Once you have selected the option press the MENU BACK button Option is temporarily saved 22 Sams elektronik Sams sams rs www sams rs AVA sda ri elektronk Converters with embedder 5 ERROR MODE This menu is used to set how the p
4. The unit has been dropped or damaged The characteristics are significantly changed 22 Use only specified replacement parts 23 Professional person authorized by the manufacturer must check the device after completion of service 24 Allow a free rack unit 1RU above and below the device for ventilation or put rack fan under the device TECHNICAL SUPPORT AND SERVICE Sams elektronik has made every effort to ensure that the equipment works in perfect condition In the event that problems that occur can not be resolved or if you have any questions regarding this equipment or information about other products produced from Sams elektronik contact your local sales representative or call Sams elektronik directly through one of the ways listed below Sales 381 11 3806 254 Technical support 381 11 2402 212 Service 381 11 4056 051 Email Sales sasa sams rs Technical support and service sams sams rs Web site www sams rs Address SAMS ELEKTRONIK d o o 48 Zivka Davidovica st 11050 Belgrade Serbia 4 Sams elektronik Sams sams rs www sams rs AVA oaa mS elekivonit Converters with embedder TABLE OF CONTENTS Description Page UNPACKING AND INSTALLATION MH RP aru 6 PAINT EIA e c 6 REMOVAL AND 5 EPUM IG DINER
5. 0 201 0 101 Color 10Hz filter mode TEMPERATURE 0 n 800mV 1090 Performance 5 409C ANALOG AUDIO INPUT CRUS 0 50 Says P Lt 4 1 gt Ae XLR female BLOCK DIAGRAM IIMPCOANCE gt 40KQ balanced Wu o rS 80dB ANALOG ELE rn Saar a 12 15 18 2498 jumper select ORDERING INFORMATION Code Name Description 005 801 AVA 12efs 4 ADC FS with 4CH audio embedder Sams elektronik Sams sams rs www sams rs AVA oaa mS elektranik Converters with embedder AVA 12ef 2 Analog to SDI converter with Frame sync and 2ch analog audio embedder Broadcast quality Converts YUV RGB CVBS or YC to digital video 12 10bit processing Fiveline adaptive 3D comb filter AGC CTI DNR EDH processing Automatic YUV pixel timing adjustment Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Integrated Test Generator Black Color Bar Easy setup with local control and LCD display Se embedder with adjustable input level 12 15 18 or 4dB Balanced analog audio inputs 24bit 48kHz 2 ch sampling and processing AVA 12ef 2 converts composite or component analog video to SDI AVA 12ef 2 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronize
6. DVD etc whose values exceed 1V p p max 7 The factory setting is STUDIO Select an option by pressing the UP DOWN keys NOTE When using a TV VCR mode then you can have irregular signals at input which may cause the illegal values of digital output signal OK SAVE UP MENU BACK DOWN BENE Menu Signal Type Once you have selected the option press the MENU BACK button Option is temporarily saved AVA Sams elektronik 9 0 0 Sams sams rs www sams rs 25 aar 116 elektranik Converters with embedder 13 CHANNEL 1 SOURCE This menu is used to determine the signal source for channel 1 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 1 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN EN Menu Channel 1 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 14 CHANNEL 1 LEVEL This menu is used to determine the signal level for channel 1 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys SAVE UP oERES MENU BACK DOWN Menu Channel 1 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 15 CHANNEL 1 POLARITY This menu is used to determine the signal polarity for channel 1 Options are NORMAL and INVERT The default setting
7. THE UNIT TO MOISTURE OR RAIN EEE DON Sup HAZARD The symbol lightning in a triangle is to alert the user to the presence of high voltage In poor conditions the user may be exposed to shock The symbol exclamation mark in a triangle is to alert the user to comply by the terms of use in user s manual which is supplied with the device CLASS I DEVICE Grounding is connected to the chassis of the device The power supply is protected with fuse against overload A DECLARATION OF CONFORMITY for product SRU RACK FRAME WITH POWER SUPPLY PSU 212 WITH CORRESPONDING MODULES AND BACK CONNECTORS The product is designed and manufactured according to the following regulations Electromagnetic Compatibility Directive EMC Low Voltage Directive ELV Documentation confirming statements can be obtained on written request for review AVA Sams elektronik 9 0 0 Sams sams rs www sams rs 3 sda mS Converters with embedder elektronik E E I I E e WARNING TO AVOID ELECTRIC SHOCK DO NOT OPEN COVER DEVICE MAINTENANCE REQUIRES PROFESSIONAL PERSON AUTHORIZED BY THE MANUFACTURER 1 Read all safety and operating instructions before using the device 2 Keep all safety and operating instructions 3 Follow the instructions from the user manual 4 Do not upgrade device except in the case advised by the manufacturer 5 Do not use the device in the presence of water and or moisture 6 Do not pour water o
8. is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP oERER MENU BACK DOWN u Menu Channel 1 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved 26 Sams elektronik Sams sams rs www sams rs AVA IS Converters with embedder elektronik 16 CHANNEL 2 SOURCE This menu is used to determine the signal source for channel 2 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 2 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN B Menu Channel 2 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 17 CHANNEL 2 LEVEL This menu is used to determine the signal level for channel 2 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys oEkIER Menu Channel 2 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 18 CHANNEL 2 POLARITY This menu is used to determine the signal polarity for channel 2 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys SAVE UP Menu Channel 2 Polarity Once you have selected the option press
9. keys OK SAVE UP MENU BACK DOWN Menu CTI amp DNR Once you have selected the option press the MENU BACK button Option is temporarily saved 10 ANTI ALIAS In digital signal processing this option reduces distortion known as aliasing This is an ideal tool for removing the major frequency components of the signal than it should have in the process Options are ON and OFF The default setting is OFF Select by pressing the UP DOWN keys OK SAVE UP E MENU BACK DOWN Menu Anti alias Once you have selected the option press the MENU BACK button Option is temporarily saved 24 Sams elektronik Sams sams rs www sams rs AVA sda mS Converters with embedder 11 AGC MODE This option sets the automatic level control of signal The options are OFF The option is disabled FAST SLOW ADAPTIVE The default setting is OFF Select by pressing the UP DOWN keys OK SAVE UP JI d MENU BACK DOWN Menu AGC mode Once you have selected the option press the MENU BACK button Option is temporarily saved 12 SIGNAL TYPE This menu is used to determine the quality of input signal The options are Studio and Sat VCR STUDIO used when you have a professional quality video signal when the video signal is 75 color bar with maximum level 1V p p TV VCR when you use signals which are unstable satellite receivers VHS
10. supply module AVA Sams elektronik Sams sams rs www sams rs 11 11 Converters with embedder lc a p 1 The module set between the guides not metal plate 2 Locking lever mount behind the groove 3 Push the lever to lock in an upright position The module is locked 12 Sams elektronik sams sams rs www sams rs AVA 11 elektronk Converters with embedder BACK CONNECTORS Fix back connector with M2 5 screw AVA 12ef lt 4 SDI OUTPUT 1 E Q lt 4 SDI OUTPUT 2 ANALOG AUDIO INPUT 1 ANALOG AUDIO INPUT 2 ANALOG AUDIO IN ANALOG AUDIO INPUT 3 E E CVBS gt Qe 44 ANALOG IN 1 CVBS lt 4 ANALOG IN 2 YC ALTE 3 9 lt 4 ANALOG IN 3 RGS gt f REF lt EXTERNAL REFERENCE SAMS Electronics www sams co yu ANALOG AUDIO IN ANALOG AUDIO INPUT 4 4 Fix back connector with M2 5 screw AVA 12ef Be sure to install a protective pad before installing the back connectors Connectors for 3 i 4 channel on AVA 12ef 2 are not present AVA Sams elektronik Sams sams rs www sams rs 13 116 elektranik Converters with embedder Place the back connector Fix the back connector with M2 5 screw SRU REAR SIDE Rear side view 1 Mass 2 Power switch 3 The socket 4 C
11. the composite signal Fixed frequency 54MHz ADC and buses for all options allows for very precise processing and digital filtering AVA 12ef is high quality embedder designed to insert four analog audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place rear side TECH NICAL SPECI FICATIONS Specifications and designs are subject to change without notice GENERAL INFORMATION REFERENCE INPUT 005 801 Analog BB 300 1 E reset era 1 5 1RU rack fame OUTPUT PERFORMANCE DIMENSIONS 1RU 19 150mm _ Bit resolution c 10 12bit processing Deliver E device power corde user manual BRO O sec E E Self adjusting ANALOG INPUT Hadjusttrent range 0 64us in 37ns steps V adjustment range 0 625 lines in 1 line step Number e 3 YUV RGB YC CVBS BNC female 750 POWER DIGITAL OUTPUT phis je c M 230V AC 10 zit p er nt E ee 30W xdi ines o MM ERI MEN ena RE 50Hz inal Serial digital SMPTE259M Overload protection front Mounted Circuit Breaker TO ese UT T IT 750 Jitter
12. 12ef 9 Xx C i DNR AUDIO IN ETE PROG AMP FRAME SYNC EMBEDDER CVBS F1 o w SYNC PROC GENLOCK wonp CLOCK DC Sams elektronik Sams sams rs www sams rs aar mS Converters with embedder elektronik AVA 12efs 2 Analog to SDI converter with Frame sync and 2ch analog audio embedder Broadcast quality Converts YUV RGB CVBS or YC to digital video 12 10bit processing Fiveline adaptive 3D comb filter AGC CTI DNR EDH processing Automatic YUV pixel timing adjustment Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Integrated Test Generator Black Color Bar Easy setup with local control and LCD display ey embedder with adjustable input level 12 15 18 or 24dB Balanced analog audio inputs 24bit 48kHz 2 ch sampling and processing AVA 12efs 2 converts composite or component analog video to SDI AVA 12efs 2 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format With both available composite and component Y Cr Cb or RGB or YC inputs this unit is ideal for
13. AL OUTPUT Riso M 230V AC 10 Pm 30W ERU ij e 2 BNC female 50 2 Signal ype Serial digital SMPTE259M Overload protection front Mounted Circuit Breaker RTT Ee 750 Jitter 0 201 Tipical 0 101 Color Bar 10Hz filter mode TEMPERATURE 0 800mV 1090 Performance 5 409C ANALOG AUDIO INPUT s OPa pe T 0 50 C lt NUMDO RR 2 io p es To XLR female EE gt 40KQ balanced BLOCK DIAGRAM S N nd n gt E A A 12 15 18 or 24dB jumper select Hat ss eer BBREFIN senec ORDERING INFORMATION Code Name Description T 005 805 AVA 12efs 2 ADC FS with 2CH audio embedder 10 Sams elektronik Sams sams rs www sams rs AVA 116 Converters with embedder MODULE INSTALATION IN SRU RACK FRAMES On the front side of rack frame unscrew the screws Open the door Make sure that the module is set to the correct place in relation to the back connector BEFORE INSTALLING OR REMOVING THE MODULE FROM SRU ALWAYS TURN OFF THE POWER Lock module with lever to the position NOTE NEVER PLACE MODULE TO PLACE OF THE POWER SUPPLY MODULE WARNING FOR POWER SUPPLY ONLY The label that indicates the place for power
14. ENGLISH 210 3 edition 1 Code 005 800 005 801 005 804 005 805 AVA 12ef s AVA 12ef s Analog to SDI converter with Frame sync and 4ch analog audio embedder for SRU rack frame standalone USER MANUAL FOR USE AND MAINTENANCE Read the instructions before using the device Keep this manual for periodic usage ann Sams elektronik 48 Zivka Davidovica st 11050 Belgrade Serbia Tel Fax 381 11 3806 253 381 11 2402 212 sams asams rs WWW Sams rs Copyright O 1999 2014 Sams elektronik d o o Published 17 mart 2010 Updated 18 jul 2014 aar mS Converters with embedder elektronik a a O SSS lt WARRANTY Dear User Thank you very much for purchasing our product Your purchase is a wise investment The equipment you have purchased is manufactured with great care from high quality parts and materials It is designed to fully meet the needs according to specifications if properly installed used and maintained according to the enclosed instructions Any technical failure or deficiency that occurs during the warranty period specified on the invoice of the purchased equipment will be inspected and serviced by Sams elektronik doo or an authorized service center of the manufacturer with the conditions set out in the warranty statement THIS DEVICE IS INTENDED FOR PROFESSIONAL USE WARRANTY STATEMENT 1 Product has declared characteristics Within the warran
15. UT 3 YUV RGB YC CVBS BNC female n enpe q T T m 750 DIGITAL OUTPUT sin DOT sas a Eat Ev atis c pM RN M tines 2 BNC female SIGMA Serial digital SMPTE259M insect PL 75Q Jitter 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode o used nsi MENU AU NBSP UNE 800mV 10 ANALOG AUDIO INPUT 5 UNOS oaa a eaan 2 1 prm 3 pin terminal strip speda Ses gt 40KQ balanced S N ratio dr etait 80dB 12 15 18 or 2498 jumper select REFERENCE INPUT Anal g BB 300 MV 1 BNC OUTPUT PERFORMANCE 3g bie tmc 10 12bit processing Black qe NT Self adjusting adjustment range 0 64us in 37ns steps V adjustment range 0 625 lines in 1 line step ORDERING INFORMATION Code Name 005 804 AVA 12ef 2 001 510 BCVA 84 001 605 SRU 306 Description ADC FS with 2CH audio embedder Back connector Rack frame for 6 modules Specifications and designs are subject to change without notice POWER able 9 2 x 12V AC POWNDES occcpxcn concen Serv corsa eda EV REN EXTA FR Y R 5W TEMPERATURE Performance nnn 5 409C zieht E cR 0 50 C BACK CONNECTOR BCVA 84 AVA
16. UT e 4 1 pm 3 pin terminal strip speda E gt 40KQ balanced S N ratio ausamkisasadazesasesesntisaba Yikenzevivu d c DE RU LV Kad En Rt 80dB 12 15 18 or 2498 jumper select REFERENCE INPUT Analog EET D 1 OUTPUT PERFORMANCE Bit MESOMMUIOMN sex ka veu VERE 10 12bit processing Black Of QU escasas ampia data MS PER Su da Self adjusting adjustment range 0 64us in 37ns steps V adjustment range 0 625 lines in 1 line step ORDERING INFORMATION Code Name 005 800 AVA 12ef 4 001 510 BCVA 84 001 605 SRU 306 Description ADC FS with 4CH audio embedder Back connector Rack frame for 6 modules Specifications and designs are subject to change without notice POWER able M E 2E 77 2 x 12V AC PONGES cortada eaa E RW E ARR GERNE XI 5W TEMPERATURE Performance nnn nnn nnn 5 409C 1 EP EFE ERE YE 0 50 C BACK CONNECTOR BCVA 84 163 92 0 163 163 C 12 10 bit ADC SYNC PROC Sams elektronik d 0 0 Sams sams rs www sams rs oar ri Conve
17. conversion of referral systems 12bit 4x oversampling allows the A D conversion of high performance 10bit output An intelligent adjustment system provides full digital filter frequency response even in the composite signal Fixed frequency 54MHz ADC and buses for all options allows for very precise processing and digital filtering AVA 12ef 4 is high quality embedder designed to insert four analog audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place The module is placed in the SRU 306 3RU chassis with capacity of 6 modules Also the device is available in standalone version TECHNICAL SPECIFICATIONS GENERAL INFORMATION MOOS ccc 005 800 Rule M 0 4 Kg m module S DITISTISIOTIS E aix xa a vives ie PER A NERA 100 x 160mm Required SRU rack frame back panel BCVA 84 Delivery includes device user manual ANALOG INPUT 3 YUV RGB YC CVBS BNC female n ennpe q T T 750 DIGITAL OUTPUT NUMDE c 2 BNC female SIGMA Serial digital SMPTE259M mEnszecec P 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode anne aa E E 800mV 10 ANALOG AUDIO INP
18. converting all types of analog video Advanced and highly flexible digital output enables high quality conversion of referral systems 12bit 4x oversampling allows the A D conversion of high performance 10bit output An intelligent adjustment system provides full digital filter frequency response even in the composite signal Fixed frequency 54MHz ADC and buses for all options allows for very precise processing and digital filtering AVA 12efs 2 is high quality embedder designed to insert two analog audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place front side rear side TECH NICAL SPECIFICATIONS Specifications and designs are subject to change without notice GENERAL INFORMATION REFERENCE INPUT HX 005 805 Analog BB 300 1 WONG Gt t 1 5 YC 1RU rack fame OUTPUT PERFORMANCE DIMENSIONS Neo oO Fa 1RU x 19 x 150mm Dali BIG radi 10 12bit processing Delivery ME BS device power corde user manual 5 Is fa Se O Self adjusting ANALOG INPUT H adjtstmient Fares 0 64us in 37ns steps V adjustment range 0 625 lines in 1 line step UME anini 3 YUV RGB YC CVBS BNC female Impedance 750 POWER DIGIT
19. crror 25 TIPE E 25 13 CHANNEL SOURCE 26 IT CHANNEL T LEVEL 26 15 CHANNEL 26 iom GAHANNE CZ SOUR E 27 1 CHANNEL 2 LEVEL c 27 18 CHANNEL 2 27 IS CNANNELS SOURCE 28 20 CHANNEL 3 LEVEL 28 ZL CHANNEL 28 22 CHANNEL 4 SOURCE 29 Zi LEVEL EE E 29 CHANNEL E POLARD Y 29 PONES WEIN ren EEEE E EE A 30 E A 30 AVA Sams elektronik d 0 0 Sams sams rs www sams rs 5 aar mS Converters with embedder UNPACKING AND INSTALLATION The box contains Module Back connector optional Protective pad for SRU rack frame optional M2 5x6 7985 screw optional SRU rack frame optional Power corde for SRU rack frame optional User manual optional Before use check the contents of the box For any deficiency report to the seller or the manufacturer of the product DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED A CARDBOARD DEVICE IS SENSITIVE TO SHAKES AND DROPS HANDLE WITH CARE DURING TRANSPORT AND ASSEMBLY Check if the product is damaged during transport PROCEDURES FOR SAFE USE OF THE DEVICE 1 Places for fastening MAINTENANCE The system maintains only person authorized by Sa
20. d in the memory The number next to Setting means that the bank is loaded into memory When the device is set select SETTING menu press the OK SAVE to open the options menu and select one of four banks to record SaveMem1 SaveMem2 SaveMem3 and SaveMem4 The device can record 4 different settings After selecting a bank press OK SAVE The display will print SAVED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button In this menu there are options LoadMem1 LoadMem2 LoadMem3 and LoadMem4 or options to load settings After selecting a bank press OK SAVE The display will print LOADED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button Option FACTORY set default settings in the currently active bank Press the OK SAVE On display will print RESETED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button OK SAVE UP Q MENU BACK DOWN DN Menu Settings NOTES 30 Sams elektronik Sams sams rs www sams rs AVA
21. d with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format With both available composite and component Y Cr Cb or RGB or YC inputs this unit is ideal for converting all types of analog video Advanced and highly flexible digital output enables high quality conversion of referral systems 12bit 4x oversampling allows the A D conversion of high performance 10bit output An intelligent adjustment system provides full digital filter frequency response even in the composite signal Fixed frequency 54MHz ADC and buses for all options allows for very precise processing and digital filtering AVA 12ef 2 is high quality embedder designed to insert two analog audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place The module is placed in the SRU 306 3RU chassis with capacity of 6 modules Also the device is available in standalone version TECHNICAL SPECIFICATIONS GENERAL INFORMATION MOOS ccc 005 804 Rule M 0 4 Kg m module S DITISTISIOTIS E aix xa a vives ie PER A NERA 100 x 160mm Required SRU rack frame back panel BCVA 84 Delivery includes device user manual ANALOG INP
22. egins on the date of sale referred in the invoice 2 The buyer loses the right to warranty if the defect cause failure from not following the user manual instructions improper installation comes to mechanical damage during use repairs and modifications by unauthorized persons installation of non genuine spare parts and if the buyer does not comply with all warnings listed in the user manual 3 The warranty is voided if the device is damaged during the disturbances from the environment natural disasters floods hail etc suffered an electric shock or lightning strike IMPORTANT NOTES 1 Be sure to thoroughly read the user manual If you have any doubts about the instructions contact the technical support of the manufacturer 2 Before contacting for technical help please make sure that are provided with all necessary conditions for normal operation 3 If the malfunction or defect in the device does not eliminate within a reasonable time from the date of failure the warranty period shall be extended for as many days as the unit is in service 4 For all maintenance interventions shall solely be authorized services listed in this Warranty Certificate 2 Sams elektronik Sams sams rs www sams rs AVA oar mS elekivonit Converters with embedder SAFETY WARNINGS FOR SRU RACK FRAME UPOZORENJE IMPORTANT SAFEY WARNING DOK CAUTION a TO AVOID RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
23. ektranik 22 CHANNEL 4 SOURCE This menu is used to determine the signal source for channel 4 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 4 Select an option by pressing the UP DOWN keys OK SAVE oE HET MENU BACK DOWN ERE Menu Channel 4 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 23 CHANNEL 4 LEVEL This menu is used to determine the signal level for channel 4 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys MENU BACK DOWN ER Menu Channel 4 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 24 CHANNEL 4 POLARITY This menu is used to determine the signal polarity for channel 4 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP BACK DOWN E Menu Channel 4 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved AVA Sams elektronik Sams sams rs www sams rs 29 aar 16 Converters with embedder elektronik DEG E qo e 25 SETTINGS After setup within the available menu options it is temporarily recorde
24. g is 100 Select by pressing the UP DOWN keys UP o MENU BACK DOWN Ba Menu Y offset Once you have selected the option press the MENU BACK button Option is temporarily saved AVA Sams elektronik sSams sams rs www sams rs 23 aar ri Converters with embedder elektronik DXX eee AAGUXccmgecwda C Ni Ou 8 Y LEVEL This menu is used to adjust the contrast This is achievable by scaling Y luma signals controlled by the user Control is allowed in a range of 0 to 200 The factory setting is 100 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Menu Y level Once you have selected the option press the MENU BACK button Option is temporarily saved 9 CTI amp DNR This menu is used to activate deactivate the optional Digital Noise Reduction and Chroma Transient Impovement Options are ON and OFF The default setting is OFF Select by pressing the UP DOWN
25. ms elektronik doo Any voluntarily opening device upgrading or servicing is strictly prohibited and is subject to warranty void and the possibility of If the device is not supplied with SRU rack frame remove the protective wrap from the device If the device is supplied with SRU rack frame remove the protective wrap from the chassis For devices that are AC 230V 50Hz powered the device is supplied with power cord Use only power corde that comes with the device SRU rack frame is mounted in a 19 special purpose rack cabinets designed for this type of device Screw device with four screws Screws for fastening are not supplied with the device The device must be connected to ground A device that is not connected to the grounding does not function properly according to factory declarations and can cause adverse effects on users and other equipment Strictly comply to all steps for proper connection of devices in the system On the SRU rack frame are 3 types of mass CHASSIS MAINS and OV The factory all three are connected According to the user s needs the masses can be switched over between them injury REMOVAL AND STORAGE 1 Before dismantling the device switch off the power remove the power cord and remove all other connectors 2 Remove the four screws for fastening 3 Remove the device from rack cabinet 4 Wrapthe machine in the foil to protect it from dust Package it in a box 5 The device must be st
26. nverters with embedder To set the device press the MENU BACK button Select the menu by pressing the UP DOWN keys On the selected menu press OK SAVE UP NE Entering the menu for setting the device MENU BACK DOWN AVA Sams elektronik Sams sams rs www sams rs 19 116 Converters embedder elektrori II UFU e LLL L L 11 L12 LLLLLLLEECCLLLLLLLLLLLLLL ZLLLLLULUL OCTDELLLAmuu 9 2 2P2Am o o Gqzdex o eo Xox o o 5 onnd 3 EMMMMM NU AM C NN 2 MENU TREE FREEZE SOURCE CVBS STATUS YUV YUV BetaCam RGB HV BLANK PASS ALL L KILL ALL 3 HORIZONTAL POSITION from 0 000 to 63 963us 4 VERTICAL POSITION from O lines to 624 lines 5 ERROR MODE PASS ALL FRAME FIELD 1 FIELD 2 BLACK 75 COLOR BAR KILL OUT 6 COLOR LEVEL from 0 100 200 7 Y OFFSET from 0 100 200 8 Y LEVEL from 0 100 200 9 CTI amp DNR 10 ANTI ALIAS OFF L ON 11 AGC MODE OFF FAST SLOW gt ADAPTIVE SIGNAL TYPE STUDIO __ 13 CHANNEL 1 SOURCE INPUT 1 INPUT 2 INPUT 3 INPUT 4 CHANNEL 1 LEVEL 6 00 dB 0 00 dB 6 00 dB 15 CHANNEL 1 POLARITY INVERT Continued on next page 20 Sams elektronik Sams sams rs www sams rs AVA
27. o UL UL 5 Analog audio inputs 4CH Analog inputs The device supports composite and component signal CVBS YC YUV BETA RGB External rererence input The device supports the black burst generator as Sams MSG BB6 EMBEDER OK SAVE AVA 12ef E MEE EN MENU BACK Analog video and 4ch analog audio converter with frame sync and embeder Front side AVA 12efs 4 If everything is OK the LED will glow green NOTE Connectors for 39 i 4 channel AVA 12ef 2 are not present 16 Sams elektronik Sams sams rs www sams rs AVA 15 elektronik Converters with embedder THE DEVICE FUNCTIONS 7 999 m n STATUS mode When you turn on the device and if it is properly connected the status is displayed 1 OK SAVE push button enters the submenu saving 2 STATUS LED e GREEN the device is in normal mode gt GREEN flashing no external reference 3 RED flashing has a external reference but there is input signal RED GREEN flashing no external reference and input signal e ORANGE freeze function is RED ORANGE flashing freeze function is on and no input signal ses GREEN ORANGE flashing freeze function is on and no external reference x RED GREEN ORANGE flashing freeze function is on and no input signal and external reference 3 Display 4 MENU BACK push button enter the menu from status mode exit from submenu 5 UP push b
28. onnections for back connectors DANGER DO NOT INSERT SHARP METAL OBJECTS OR FINGERS INTO THE SPACE BEHIND THE POWER PANEL HIGH VOLTAGE 444 THE SIGN LIGHTNING IN A TRIANGLE IS TO ALERT THE USER TO THE PRESENCE OF LIFE THREATENING HIGH POWER LABEL IS PLACED NEXT TO POWER PANEL 14 Sams elektronik sams sams rs www sams rs AVA 11 elektronik Converters with embedder PCB WITH THE LAYOUT OF ELEMENTS _ E 0 S 2 tone C74 R94 im 2 85958 ecce CV54 Res rQ000000 E o 93 umm ES 8 bts o C64 06 1 js Ul MM xa 000000047 ee 5 PB _ coseeecre 666666 6 66 E 857 e 01000 2 n a a a a So Ba pn H H 0000 MONO oo amp 1 B gg NO0 E ES 0 o o o 188 S Ln Seno Go oo BO 1 CV570 Be 85 LRO R 0 0 n mI ro amp 5 n 4 5 L 7 7 5 000 000 00000000 n 88 0 E 5 66 6 25 Q E 3 2 ES 5 MAS T moa ro B aos 0000 5 TIT 2 E 8 Ag R1 R13 e2 25 W d 3 RIP o 2d mIRE s Wi 3 Hos EE 5 ELE E e O DIDI ni om H AVA 12e Jumpe
29. ored in a room without moisture Illustration mounted device elektranik Sams elektronik Sams sams rs www sams rs AVA oaa 115 elektranik DESCRIPTION Converters with embedder AVA 12ef 4 Analog to SDI converter with Frame sync and 4ch analog audio embedder Broadcast quality Converts YUV RGB CVBS or YC to digital video 12 10bit processing Fiveline adaptive 3D comb filter AGC CTI DNR EDH processing Automatic YUV pixel timing adjustment Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Integrated Test Generator Black Color Bar Easy setup with local control and LCD display Se embedder with adjustable input level 12 15 18 or 4dB Balanced analog audio inputs 24bit 48kHz 4 ch sampling and processing AVA 12ef 4 converts composite or component analog video to SDI AVA 12ef 4 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format With both available composite and component Y Cr Cb or RGB or YC inputs this unit is ideal for converting all types of analog video Advanced and highly flexible digital output enables high quality
30. r is factory set to an external reference If due to technical circumstances the presence of an external reference is disabled switch jumper to INT position In this case the device will be referred to the input signal CH 1 CH 2 CH 3 CH 4 EAD 12 audio The factory setting for the audio input is 24dB for the module resp 12dB for standalone Set the jumper to the desired value according to table on the board EXPLANATION If for example the incoming level 24dB a jumper is set to 24dB the digital signal will be OdB These concerns also apply to any other specific values Jumpers for 39 4 channel on AVA 12ef 2 are not present AVA Sams elektronik 9 0 0 Sams sams rs www sams rs 15 aar rii 5 Converters with embedder elektronik INSTALLATION STANDALONE For the best signal quality use Belden 8281 or better coaxial cable for analog video Belden 16944 or better coaxial cable for digital video Connect the power cord The device works only on AC 230 V 50 Hz 1 1 ANALOG INPUT SDIOUT 1 5010072 C 3300 5007 m SD EXT REF BLUE RED GREEN lt U V E Y E SN WWW Sams rs Made in Serbia e j AVA 12efs e A CODE 005 801 POWER FUSE 500mA Rear side Turn on the device Connect all necessary connectors by pressing switch before the unit is turned on Connectors on rear side M SDI outputs L
31. r moisten the device with any type of liquid 7 Openings on device are provided for ventilation 8 Do not block air flow through the ventilation openings 9 This product is powered by 230V 10 50Hz 10 This product is equipped with a three wire cord with grounding 11 This device is equipped with a protective fuse in the power outlet Do not bypass fuse 12 Do not replace the fuse Replacement can be made by a person authorized by the manufacturer 13 Do not bend the power cord so that it can be damaged 14 Connect connectors as in the enclosed instructions Deviations from the allowed values predicted for the inputs and outputs of the device can cause severe damage and warranty void 15 Do not use the device in an environment that contains flammable or explosive materials in any physical state 16 Turn off the power corde before cleaning Do not use liquid aerosol or flammable cleaners Use only a dry cloth 17 Servicing is performed by a qualified person Removing the cover user is exposed to high voltages 18 Never use the device when the cover is open and the device is powered on 19 Do not expose to extreme high or low temperatures 20 Do not expose to sudden temperature changes 21 Call service in the following cases The power cord or plug is damaged Liquid or foreign objects is inside the device The machine is exposed to water and moisture The device does not function according to specification
32. roduct behaves during a fault in the signal Select an option PASS ALL device pass signal no matter how bad signal is FRAME the device will freeze the last good picture due to poor incoming video signal FIELD 1 the device will freeze in the first field due to poor incoming video signal FIELD 2 the device will freeze the second field due to poor incoming video signal BLACK the unit will generate a black image due to poor incoming video signal 75 COLOR BAR the unit will generate a color bar due to poor incoming video signal KILL OUT device will cancel the signal at the output due to poor incoming video signal The factory setting is FIELD 1 Select an option by pressing the UP DOWN keys OK SAVE UP M M o _ Boe MENU BACK DOWN Menu Error mode Once you have selected the option press the MENU BACK button Option is temporarily saved 6 COLOR LEVEL This menu is used to adjust the color level This is achievable by scaling Cr and Cb signals controlled by the user Control is allowed in a range of 0 to 200 The factory setting is 100 Select by pressing the UP DOWN keys 5 UP op MENU BACK DOWN ABE Menu Color level Once you have selected the option press the MENU BACK button Option is temporarily saved 7 Y OFFSET This menu is used to adjust the brightness Control is allowed in a range of 0 to 200 The factory settin
33. rters with embedder elektronik AVA 12efs 4 Analog to SDI converter with Frame sync and 4ch analog audio embedder Broadcast quality Converts YUV RGB CVBS or YC to digital video 12 106 processing Fiveline adaptive 3D comb filter AGC CTI DNR EDH processing Automatic YUV pixel timing adjustment Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Integrated Test Generator Black Color Bar Easy setup with local control and LCD display Audio embedder with adjustable input level 12 15 18 or B Balanced analog audio inputs 24bit 48kHz 4 ch sampling and processing AVA 12efs 4 converts composite or component analog video to SDI AVA 12ef have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format With both available composite and component Y Cr Cb or RGB or YC inputs this unit is ideal for converting all types of analog video Advanced and highly flexible digital output enables high quality conversion of referral systems 12bit 4x oversampling allows the A D conversion of high performance 10bit output An intelligent adjustment system provides full digital filter frequency response even in
34. the MENU BACK button Option is temporarily saved AVA Sams elektronik 9 0 0 Sams sams rs www sams rs 27 aar 116 elektranik Converters with embedder 19 CHANNEL 3 SOURCE This menu is used to determine the signal source for channel 3 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 3 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN f n Menu Channel 3 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 20 CHANNEL 3 LEVEL This menu is used to determine the signal level for channel 3 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys SAVE UP MENU BACK DOWN Menu Channel 3 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 21 CHANNEL 3 POLARITY This menu is used to determine the signal polarity for channel 3 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys SAVE UP E MENU BACK DOWN Menu Channel 3 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved 28 Sams elektronik Sams sams rs www sams rs AVA IS Converters with embedder el
35. ty period manufacturer ensures the removal of technical failures product defects or replacement of products if declared characteristics of the product are changed 2 Ifthe goods are not delivered as specified with the contract the consumer has the right to request from the manufacturer service provider to eliminate the lack of conformity without charge repair or replacement or to request an appropriate price reduction or terminate the contract 3 Any repair or replacement must be made within a reasonable time without significant inconvenience to the consumer taking into account the nature and the purpose for which the consumer has purchased the product 4 The consumer has the right to terminate the contract if he can realize the right to repair or replacement or if the manufacturer servicer has not completed repair or replacement within a reasonable time or if the manufacturer servicer did not perform repair or replacement without significant inconvenience to the consumer 5 The consumer may not terminate the contract if the lack of conformity of the product is negligible 6 The product will function properly when used in accordance with the user manual 7 Period of servicing the product is 6 years from the launch on the market The product purchased outside the territory of Serbia does not fall under the terms of this warranty only to 1 year factory warranty from date of purchase TERMS OF WARRANTY 1 The warranty period b
36. utton Frame Freeze choose the value in the submenu freezes the image in the status mode 6 DOWN push button choose the value in the submenu AVA Sams elektronik 9 0 0 Sams sams rs www sams rs 17 116 Converters with embedder elektrori lla c eee ee SSS ERRORS WITH CONNECTIVITY AND STATUS ERES Y P No input signal If you notice that the LED flashes red verify that the incoming signal is correct or check if the incoming Signal cable is properly connected SEREN 21 i No reference signal If you notice that the LED flashes green check if the external reference signal cable is properly connected The image is frozen The status mode pressing the button UP the picture freezes 18 Sams elektronik Sams sams rs www sams rs AVA sda mS elektronik FACTORY SETUP INPUT CVBS HV BLANK PASS ALL H POS 00 000us V POS 000 lines ERROR MODE FIELD 1 COLOUR LEVEL 100 Y OFFSET Y LEVEL CTI amp DNR ANTI ALIAS AGC MODE SIGNAL TYPE SIGNAL TYPE CHAN 1 SRC CHAN 1 LVL CHAN 1 POL CHAN 2 SRC CHAN 2 LVL CHAN 2 POL CHAN 3 SRC CHAN 3 LVL CHAN 3 POL CHAN 4 SRC CHAN 4 LVL CHAN 4 POL 100 100 OFF OFF OFF STUDIO STUDIO INPUT 1 0 00 db NORMAL INPUT 2 0 00 db NORMAL INPUT 3 0 00 db NORMAL INPUT 4 0 00 db NORMAL NOTE Options for 3 i 4 channel on AVA 12ef 2 are not present MENU Co
Download Pdf Manuals
Related Search