Features, Specifications, and Accessories
Contents
1. Resolution 160 x 120 Spectral response 8 14 um MDTD lt 0 1 C Minimum Discernable Temp Difference Dynamic range 40 C to 800 C 40 F to 1480 F using 3 ranges with auto switching between ranges Refresh rate 30 Hz Spot temperature 40 C to 800 C 40 F to 1480 F range Ambient temperature range 15 C to 150 C 5 F to 300 F e2v technologies uk limited 2007 Lens Lens material Germanium Focal length 6mm Focal distance 1 m to infinity optimised at 4 m 3 feet to infinity optimised at 13 feet Horizontal aperture f 1 0 Field of view 50 horizontal Viewing Display type Transflective active matrix colour TFT Display size 90 mm 3 5 inches Backlight White LED Mechanical Data Overall dimensions 130mm x 185 mm x 185 mm HxWxD 5 1 x 7 2 x 7 2 inch nominal including handle 295mm x 185 mm x 185 mm HxWxD 11 5 x 7 2 x 7 2 inch nominal Weight without battery lt 1 2 kg 2 6 pounds with battery lt 1 5 kg 3 3 pounds with battery and handle lt 1 7 kg 3 7 pounds Materials Outer camera case Radel R 5100 Rear bumper Multiflex Front bumper Multiflex Neck strap Nomex Side straps Nomex Handle Radel R 5100 overmoulded in Santoprene Electrical Data Power supply Power 3 W typical consumption Start up time 5 seconds typical P7030 page 3 RECHARGEABLE BATTERY AND CHARGER SPECIFICATION Battery Type N2. INTRODUCTION Argus 4 is the latest generation of Argus Thermal Imaging Camera TIC from e2v technologies The Argus 4 has been designed with digital imaging technology for a sharper picture and uses the highly successful Amorphous Silicon ASi Microbolometer Detector that is in use by many of the world s fire brigades The Argus 4 is a simple to operate robust self contained camera with fully automatic operation no control or adjustment is required in use The camera has been specifically designed to help firefighters to see through smoke identify and rescue casualties and locate hot spots or the seat and spread of the fire It has many further applications where temperatures require monitoring such as preventative maintenance and condition monitoring of equipment It also provides vision where light is unavailable CAMERA STANDARD FEATURES The Argus 4 comes with the most advanced features available in any Thermal Imaging Camera These include e Dynamic Scene Colorisation DSC Colorises the thermal image to allow the firefighter to pinpoint the hottest areas within the fire scene e Direct Temperature Measurement DTM Displays the temperature of objects within a defined area of the thermal scene e SceneSave Digital Image Capture The Argus 4 can capture and store up to 100 images These can then be viewed or deleted using the remote control supplied Using the software provided the captured images can
3. be downloaded to a suitable laptop PC and exported in bmp format e Tri Mode Sensitivity Microbolometer cameras have two modes of sensitivity high and low Argus 4 now has a third level of sensitivity for very high scene temperatures to enable clear imagery at all temperatures e Customisable Start up Screen Brigade logos or station names can be added to the start up screen for asset tracking and or personalisation of the camera e Ambient Temperature Measurement A sensor fitted to the front of the camera which measures the ambient temperature of the local environment The temperature is displayed on the viewing screen e X2Zoom Allows the user to zoom in on the scene from a distance for improved investigation and identification of hot spots and dangers P7030 Argus 4 Thermal Imaging Camera e Time and Date The time and date is displayed at the top of the viewing screen e Remote Control The Argus 4 is supplied with a remote control that allows the end user to adjust LCD settings set the dynamic scene colorisation and set the time and date Stored images can be reviewed and deleted Power for the Argus 4 is provided by an integral battery pack located on the top of the camera The camera has a single on off button with a delayed off operation to prevent accidental power down during use The camera will display a start up screen until a useable thermal image is produced The Argus 4 is constructed from hig
4. h quality Radel R 5100 which has been chosen for its strength resistance to heat water and impact Protection from shock is provided by a combination of rugged components optimum mechanical design and protective bumpers The camera is sealed to allow short term total immersion in water IP67 The camera is supplied with side straps and a removable handle which provides flexible operation and transfer between users No end user maintenance is required other than recharging of batteries and post use external cleaning with a soft cloth e2v technologies uk limited Waterhouse Lane Chelmsford Essex CM1 2QU United Kingdom Telephone 44 0 1245 493493 Facsimile 44 0 1245 492492 e mail enquiries e2v com Internet www e2v com Holding Company e2v technologies plc e2v technologies inc 4 Westchester Plaza PO Box 1482 Elmsford NY10523 1482 USA Telephone 914 592 6050 Facsimile 914 592 5148 e mail enquiries e2vtechnologies us e2v technologies uk limited 2007 A1A P7030 Issue 4 March 2007 101157 CAMERA STANDARD ACCESSORIES The Argus 4 comes with the following standard accessories Handle Soft carry case Side straps Remote Control Two rechargeable battery packs Battery charger with mains plug US UK Europe Neck strap USB Connection Lead for PC laptop User manual End user software WARRANTY AND SUPPORT The camera is supplied with a 24 month warranty as standard Warranty can be exte
5. i MH Rechargeable Battery Capacity 2300 mAH Battery life 4 hours ambient temperature 22 C 72 F Charge time 2 hours nominal Recharge cycles 500 80 capacity Length 125 mm 4 8 inches nominal Width 55 mm 2 2 inches nominal Height 50mm 2 inches nominal Net weight 220 g 0 1 pounds nominal Charging temperature 0 C 40 C 32 F 104 F 65 C 150 F can be tolerated Sealing IP56 Charger Power requirements 100 240 VAC 50 60 Hz 1 A max Length 105 mm 4 inches nominal Width 65 mm 2 5 inches nominal Height 35 mm 1 4 inches nominal Net weight 220 g 0 1 pounds nominal Operating temperature 0 C 40 C 32 F 104 F Protection Over voltage and over temperature protection built into the charger and battery Compliance EMC Directive 89 336 EEC Low Voltage Directive 73 23 EEC BS EN60335 Part 1 and Part 2 29 RoHS All parts of the system are compliant with EU directive 2002 95 EC Sealing IP20 Charging Shoe Length 150 mm 5 8 inches nominal Width 70 mm 2 75 inches nominal Height 50 mm 2 inches nominal Net weight 200 g 0 1 pounds Operating temperature 0 C 40 C 32 F 104 F Sealing IP20 Whilst e2v technologies has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use thereof and also reserves the right to change the specification of goods withou
6. nded for up to an additional three years at the time of purchase e2v technologies will attempt to repair any camera within 48 hours of receipt at one of their service centres worldwide e2v technologies uk limited 2007 OPTIONAL CAMERA ACCESSORIES The Argus 4 has a complementary range of accessories These are Truck Storage Mount and Battery Charger Provides secure storage with instant access for the camera and charging facilities for the battery pack Part Number P7030TSMBC Transmitter Battery Pack Allows the transmission of the thermal image from the camera to other personnel outside the fire incident via a radio link Part Number P7030TX Receiver Station and Kit The Receiver Station is a PC based system that allows the viewing of the thermal image transmitted from the camera The Receiver Station is available as complete solution PC and receiving card and antenna or as a kit receiving card and antenna Part Numbers P7030RRS and P7030RKT External Power and Video Adaptor A module to replace the battery pack to allow live digital video to be viewed and the camera externally powered Part Number P7030EPVA Hard Carry Case An alternative to the soft carry case Can be supplied with the camera using part number P7030 N or as an after sale accessory Part Number P7030HC Mounting Bracket The Mounting Bracket provides a solution for the permanent fixing of the camera to any flat surface Part N
7. t notice e2v technologies accepts no liability beyond the set out in its standard conditions of sale in respect of infringement of third party patents arising from the use of tubes or other devices in accordance with information contained herein e2v technologies uk limited 2007 P7030 page 4
8. umber P7030MB P7030 page 2 CAMERA SPECIFICATION Compliance Data BS EN 61000 6 3 2001 Class B FCC CFR 47 Part 15 Radiated Emissions BS EN 61000 6 3 2001 Class B FCC CFR 47 Part 15 Electrostatic Discharge BS EN 61000 6 1 2001 Class B IEC 60950 1 and related national standards BS EN 60721 3 2 Class 2M3 All parts of the system are compliant with EU directive 2002 95 EC Conducted REVEMC Emissions Safety Vibration Shock Restriction of the use of Hazardous Substances in electrical and electronic equipment RoHS Environmental Data Thermal The camera has been designed to operate conditions for e 45 minutes at 80 C 176 F e 15 minutes at 150 C 300 F e 7 minutes at 260 C 500 F e Minimum operating temperature is 10 C 14 F Sealing The camera is sealed to allow short term immersion in water IP67 Impact The camera has been designed to withstand a drop from a height of 2 metres 78 inches Vibration The camera has been design to withstand transportation vibration defined by BS EN 60721 3 2 Class 2M3 Storage The camera can be stored for extended periods It is recommended that for maximum effective operational life the storage temperature is kept between 10 C and 40 C 14 F and 104 F and the camera is retained in its carry case when not in use Optical Data Detector Sensor type Uncooled Microbolometer Sensor material Amorphous Silicon ASi
Download Pdf Manuals
Related Search