Home

DOSIMASS Software Manual

Contents

1. 128110A 141 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Blank page 142 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 14 Glossary Activation Activate a dosimeter such that it will perform the dosimetry measurements dose equivalent dose rate equivalent Activate the dosimeter Turn dosimeter ON to measure dose dose rate etc Assignment Assign a dosimeter to an individual Assignment of a dosimeter is normally done at the activation time but is not necessary BDD Data Base DCE Data Communications Equipment devices that provide all the functions required to establish and maintain a connection for data transmission for example a PC Deactivation Turn OFF a dosimeter and stop the measurement Onc
2. Dosimeter n 189628 DMC2000S ig x 2 Ready for history reading JPAAAAAAAAARAAAAAAARARARAAARARARAAS pannaan v Ki gt 4 a 3 Load Save history history Text export 128110A 101 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM This window includes the following elements 1 A title bar that includes the Dosimeter Number and the Dosimeter Type 2 A Blank area which is designed to receive the current messages addressed to the user the textual representation of the Events History the summary of the Events History and the graphic representation of the Events History 3 a series of operation keys that enable the use of the Events History function Note when the Events History reading is conducted from a file the Dosimeter number and the Dosimeter type that is associated with this Events History will appear in the title bar 9 5 Function Keys The function keys are located on the bottom portion of the Events History window The corresponding functions are activated by a simple click Load Hee This function key allows the user to read the Events History data recorded in a file Save
3. Excel export Format Allows to export the file to a document that can be opened directly with excel Standard Export Format this format allows the data to be exported to a text file Note that all the files will be exported as a text file 112 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined E 2 x Direct m ees CAMGPI Applications DOSIMASS_DM Save in E DOSIMASS_DM jee langue 20010202 152676 logfile 2 test File name te Save Save as type tet Cancel 9 12 Reading an Events History Directly in EZPROM This function is accessible directly from the Factory tab in the Configuration window In order to conduct a reading directly in E2PROM the following procedure must be executed m Copy the address of the Start of the Events History in question see Summary Display page 106 Note for the current Events History the start address appears in the Summary area m Access the Configuration window see Access to the Configuration window page 53 m From the Factory tab input the Next Address to Read data with the start address of the Event History to read in EZ2PROM a Then Click o
4. 2 5 2 Shutdown of the DOSINET Software Module m From the Windows taskbar at the bottom of the screen right click on the DOSINET task box Astan E g Bis oe oy I SE Paint Shop Fro itl Dosinet Sd 11 38 AM The following pop up menu will appear Bestoe Minimize Urnminimee x Close Alt F4 m Click on Close using the left mouse button 128110A 31 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Blank page 32 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 3 General Overview 3 1 Introduction This chapter is designed to facilitate access to the entire set of DOSIMASS Dosimeter software functions As such the following information will be presented Access levels to the different information m Presentation of the main screen m General description of all of the functions accessible from the menu and m Operating princip
5. MGF Instruments 5A BF1 13113 Lamanon FRANCE T l 33 404 30 59 59 59 Fax 3340 4 90 59 55 18 MGF Instruments Inc S000 Highlands Parkway Suite 150 Smyrna Georgia 30082 USA Tel 1 770 432 2744 Fax 1 r r0 492 9179 Waming this software is protected under copyright law and by intemational convention Reproduction or distnibution of this software in whole or in part by any means of any form i stnctliy prohibited and any person who does so shall be considered guilty of copynght infnngement and shall be liable te cnminal prosecution as provided for by the law 3 9 Use of the Keyboard Full use of the DOSIMASS Dosimeter software is possible using only the PC keyboard 3 5 1 Conventions In the following section the key designation is as follows 48 DOWN Arrow Key RIGHT Arrow Key ENTER Key LEFT Arrow Key UP Arrow Key SHIFT Key TAB Key navigation key for moving downward on the screen navigation key for moving to the right on the screen validation key enter key on main keyboard or number pad keyboard navigation key for moving to the left on the screen navigation key for moving upwards on the screen activation key for uppercase characters and activation key for tabulation 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or rep
6. amp Thresh Assign a Status us onam lositraions a oiae T System Factory Dose alarm Rate alarm Dose warning a Time alarm _ Rate warning a Primary measurements Internal Hed Oh Primary dose oo mrem Primary rate 000E 0 mrem h Primary dose threshald fi 00E mrem Primary rate threshold 5 00E 1 mrerih Primary dose warning 2 00E 1 mer Primary rate warning 7 008 7 nner Time els aie Time threshald o n o mn Load configuration configuration Restore initial dosimeter Read another dosimeter Write DM dosimeter 10 1 2 List of Operator Messages The main operator messages are presented in the following table according to the alphabetical order of the label Convention In the Operator message wording there will be one or several dynamic information fields In the table below this information is replaced with Example Failure to access software protection key 12 Contact MGP Instruments is replaced with Failure to access software protection key Contact MGP Instruments in case the diagnostic tool indicates that the user should contact MGP Instruments the user should remember to note the dynamic information mentioned in the operator message such as the error number for example 128110A 117 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The p
7. Exit Note regardless of the operation to be conducted addition modification deletion of a user begins by typing the User Name in the section entitled User ID Add a New User m Type in the User Name in the section entitled User ID When the cursor moves into the following sections Password 1 and Password 2 the characters are automatically masked by the lt lt gt gt symbol if the User ID already exists m Type the password corresponding to the new user in the section entitled Password 7 and m Type the same password into the section entitled Password 2 Note the two passwords must be identical which allows the system to ensure that the password typed in the section entitled Password 1 was input with no typographical errors In case there is a discrepancy between the two passwords the user must input the two passwords again m Select the corresponding access level in the drop down menu from among the following Operator Supervisor Administrator or MGP Instruments MB OOOdOdO Click on Insert in order to register the new user account 39 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 3 4 2 4 40 m Click
8. Startup using Windows Desktop for use with the LDM 210 220 Doasimass order to activate the software DOSIMASS NEW Pile ES File Edit Dis play The following window appears m Double click on the corresponding icon Double click on the icon that corresponds to the DOSIMASS Dosimeter software in 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined User license provided to Name Entreprise Serial 0123466739 DOSIMASS D M Version 723 kK 05 Noy 2003 Copyright 1996 2003 MGF Instruments 2 4 4 Startup using Windows Desktop for use with the LDM 2000 or the LDM 101 Reader Using the startup folder placed on the Desktop entitled DOSIMASS by default Double click on the corresponding icon m Double click on the icon that corresponds to the DOSINET software in order to establish the link with the Dosimeter reader 1 object selected naa 0 og The following windowappears 128110A 29 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or
9. Te aes Assign Status E leaitrations ee block Syster Factory Paging User display OOOOU0 Seite ores figs pofinesct Load configuration configuration Restore initial dosimeter Reread dosimeter Read another dosimeter write DM The following parameters are inaccessible m Messages 1 4 m Fading 128110A 79 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 5 3 8 System 4 Dosimeter neff fe DMC20005 Measures Operating ser eae Assign Status E foaneratons 308 zones ajaz System Factory E PROM reading window 208 bytes Optical test enabled Marking timeout Detector Saturation AO Swh o Firmware version fa Model NTEQ2D Low battery autonomy in PAUSE p h a Eh rrer Low battery autonomy in RUN Total dose oo o mrem Loaded battery required level Hi E L i Unloaded battery required level 140 os Calib Mode M Low rate algo Rate Al beep long ja ae corat oo f Primary measurements secondary measurements TH has io PFRECN B4 Hp internal ES ha disabled En Tumax 120 PRECM es i without antimicrophory M cha Hpi1o internal Ch323 TNINT B N
10. eM tks 1237 Assign Seq 44 Mero ex i timestamped 5 Fun 1997 i Restore initial dosimeter Load configuration configuration Reread dosimeter Read another dosimeter Write Chi 71 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 2 8 72 Paging this input field allows the definition of four alphanumeric messages These messages can be presented on the Dosimeter display during the passage in front of a reader configured for this purpose This feature generally used in the context of a centralized Dosimeter system enables the transmission of warning messages to the individuals wearing the Dosimeter m Flash Measurements the group of parameters in this zone is related to dosimeters specifically used for military applications nuclear flash They are not used or displayed by the DMC2000 m User Area parameters to be coded in hexadecimal that can be used for any purpose when stored in the dosimeter User defined memory allocated in the Dosimeter where the user can store any ASCII message User Display an alphanumeric message of up to six characters constantly displayed o
11. incorrect parameters the current access level e g Supervisor is accessible by clicking on Delete 3 4 2 2 Log Out Ctrl D This function allows the user to return to the Operator access level Note if the system detects no action from the user using either the keyboard or the mouse for more than a configurable delay manufacturer configuration 10 mn by default then the DOSIMASS Dosimeter software automatically reverts to this default access level m Using the main menu select Administration Log out or use the keyboard hot keys Ctrl D The main screen will be displayed No access level indication will appear in the title bar 3 4 2 3 Account Management Ctri F4 This function allows the user to add modify and delete different users and their access levels and is accessible only to the Administrator Using the main menu select Administration Account Management The following window will appear 38 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 128110A Error Style not defined 3 Account management User id OPERATOR Password 1 SE tats Password 2 a tittat Access level Operator v Insert Modify Delete
12. 7 1 Enim ella ees Controlled Nea aarne a ee Sere ee nee ner eee eee 89 7 2 EXIT IFOM a Controlled AN Cae siit ioe alat siete lhc oe a cou tuaueSa ti aieia test g 91 8 ASSIGNMENT MENU OPTION A essssscssssusnccncccccnscneensensensenesoesousausausausauscuscasenacs 95 8 1 Assignment of a Dosimeter using an LDM 2000 LDM210 or LDM220 recommended 95 8 2 Assignment of the DMC 2000 using an LDM 101 Reader ccc cccceeccceeeeeeeeeeeeeaes 97 8 3 Assignment of a DMC 100 90 using an LDM 101 Reader cceecccecceeeeeeeeeeees 97 9 OPERATION OF THE EVENTS HISTORY MENU OPTION cccccsecceeseeseeeeeeeees 99 9 1 MEOCUCION anaa S a tae Serre rene 99 9 2 MPOortant DETIMMIGHS arirarani aa N N OR 99 92i C EVEMS HISTON diesa E suk uke Rene A E 99 922 CURFENTIE VENIS FISON ecis a dhe tek 99 9 2 3 Closure of an Events HIStory cccccccccsececececeeeseeeeseseeseeeseeeeeseeseeesseeesaees 100 9 2 4 INUIMDECROREVEMISIAISIONY cirein Ea iaa eA S EE 100 92 9 Events History SaturalomMensisor ii eoe e a 100 92 6 Ev nts HIStory PEro ienaa E E A 100 9 2 DOSE MC OMEN senesini a ia 100 9 3 Access to the Events History Function ccccccccscceeeeecseceeeceecesesaeecseeceessueeaaes 101 9 4 EVENS FUISIOLY morenic toate etccmiad E A E dee bes dose baatin dade S ee Soter 101 9 5 FUNCTION K OY Stag nc copia cette tanec aac shal a Weteicesenconotds bic ctaeateaal des 102 9 6 PE AGING all EVENS ISILON acsee
13. Attention the data that appears in the current Configuration window was not entirely input into the Dosimeter Cause incorrect internal structure of the file his containing the Events History An alteration of this file has made the corresponding data irrecoverable Solution None A new history may be started but the most recent histogram is unrecoverable Cause attempt to add an existing user Solution input another name Cause incorrect input Solution begin input again If the problem persists or if the information has been forgotten contact the person in charge of the Account Management of the user see Access Levels page 38 Cause interruption of the transmission between the Dosimeter reader and the Dosimeter due to one of the following The user clicked on the Cancel button of an data exchange in progress The Dosimeter is no longer present at the time of the data exchange the DMC 2000 is too far from the LDM 2000 or the Dosimeter was removed from the LDM 101 Solution leave the Dosimeter in place during the entire length of the data exchange Attention the information that appears in the current configuration window can be modified if this is the case then the data is highlighted in red Cause problem with the hands free connection of the DMC 2000 and the LDM 2000 Solution Verify the correct operation of the transmission by inspecting the green YA and red lights on the front of the L
14. Cause this fault is probably due to a change in Dosimeters while the data exchange with the reader was in progress solution replace the Dosimeter in order to finish the task in progress Cause problem with the data exchange between the Dosimeter reader and the PC Solution Verify that the Dosimeter reader is plugged in Verify that the cable between the Dosimeter reader and the PC is correctly installed COM1 serial port Verify that the address of the Dosimeter reader is correct 1 for LDM 2000 0 for LDM 101 For more information see Hardware Installation page 8 119 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Operator Message Label Events History Overwritten Illegal Tag in the Events History Tag missing from the Events History Incorrect Size Received DM message Incorrect Size DOSINET frame transmitted Incorrect Size DOSINET frame received Illegal Value 120 Dosimass DM Diagnostic Tool See Cause part of a single Events History in the memory of a Dosimeter is no longer accessible because it was overwritten The size of an Events History is finite the oldest data is overwritten by the most recent events Solu
15. File Edit Search i EVENT LOG Identification Event 42 43 00 04 12 05 05 26 Host OG 06 OG 06 OG DOSIMASS activation client connection to se Event Log activatic client connection to se DOSIMASS desactivatior DOSIMASS activation client connection to client connection to client connection to client connection to client connection to S 4 56 56 5f 5T Sf 10 10 10 10 42 10 58 11 14 DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS DOSIMASS Module DOSINET Module DOSINET Module Module DOSINET DOSINET DOSINET DOSINET DOSINET 08 08 08 08 08 08 Note this Event Log is saved in a text file entitled logfile txt and maintained under the Installation sub directory entitled DOSIMASS_DM Help Menu This menu provides access to the on line help feature and provides information relative to the DOSIMASS Dosimeter software Contents F Ctrl E Registration About OOSIMASS OM Contents This function provides access to the on line help feature if available Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 128110A Dosimass DM Error
16. Hp 10 gt 20 keV Hp 0 07 gt 250 keV m Secondary Measurements this section regroups the parameters that enable secondary measurement configuration o Enabled disabled select the managed option so that the main measures are activated o Hp 10 Hp 0 07 same signification as for that of primary measures o nternal External same signification as for that of primary measures Oo V1 V2 V3 measurement channels to validate in function of the measurement type Dose Rate Algo Parameters not labeled m These are a group of factory parameters used in the measurement processing the dose rate algorithm these values are factory set and must not be modified The text labels and value depend on the firmware version of the dosimeter Corr BF N MAX TN MAX M INT TM MAX CNM INT TN INT CNM MAX PRECN NATLIM PRECM NMLIN N U 000000 0 5 2 9 Factory The Factory tab allows a user to visualize a summary of the most recent Events History and to read the entire contents of the E2PROM of the Dosimeter 4 Dosimeter n 189628 DMC20005 Measures Operating Sub User hee Assign Status ee trations ZINES E lack Tene Factory E2PROM Dump Summary Start date 6 Dec 2000 Starttime 16 h 39 mn 58s Start address xl EEs End address xl EG E2PROM window 208 History period 10 mn Next addrto read 0 Frint Read EZPROM Read another dosimeter Restore initial dos
17. Modifying these parameter values Each parameter is comprised of a label and a field that contains the corresponding value This field is represented using the following font and colors conventions m White Background when the field s background is white then this parameter can be modified Primary measurements Internal Hpi Oo Primary dose 0 5 Primary dose threshold 90E 45 Primate dose warning 7 008 2 hirer Time isih halm 44s Secondary measurements Internal Hpi1 0 secondary dose 0 0 Secondary dose threshold 9 90E 5 secondary dose warning 7 008 mrem mrem mrem mrem Ther m Gray Background when the field s background is the same color as the rest of the window gray then this parameter cannot be modified i e user access level insufficient parameter displayed in this section is read only Primary measurements Internal Hot Oh Primary dose 0 0 mrem Primary dose threshold 2 00E 1 mrem Primate dose warning 2O0E 4 hirer Time 0 n mn 9 s Secondary measurements Internal Hp 1 0 Secondary dose 0 0 mem Secondary dose threshold 90E 5 mrem secondary dose warning if OE mre 128110A 55 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error St
18. Style not defined 3 4 6 2 Registration This function allows entering the registration information of the software The following registration window will appear Registration MGP IHSTRUMEHTS Company MGFI Serial 01234 OK Cancel Enter the appropriate data in the three fields and validate by clicking on the Ok button Fill all the fields exactly as mentioned in the user license must respect upper and lower case characters for proper registration 3 4 6 3 About DOSIMASS DM This function allows access to information concerning the DOSIMASS Dosimeter software including m License granted to the user m Number and version index of the Software and m Issuance date In order to access this function from the main menu select Help About DOSIMASS DM The following window will appear 128110A 47 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 4 About DOSIMASS DM IN TRUMERT Hi VIG P DOSIMASS DM Version 723E Dosimass DM 5 Jan 2000 Copyright 1996 2000 MGP Instruments User license provided to David Jarrow MGF Instruments Inc Serial 123456 Memory available 34336765
19. Switch the power button of the Dosimeter reader to the On position for the LDM 101 If using the LDM 2000 verify that the reader s display panel appears as follows SLV LCE 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Note The elements of the displayed message have the following meaning SLV The LDM 2000 reader is in Slave mode LCE The LDM 2000 reader is in local mode it proceeds to access controls on local criteria and locally Stores the data on the viewed passages For further information regarding various reader displays refer to the LDM 2000 User s Manual 2 4 1 Start up using Windows Desktop Note Using the start up folder placed on the Desktop entitled DOSIMASS by default m Double click on the corresponding icon m Double click on the icon that corresponds to the DOSINET software in order to establish the link with the Dosimeter reader 1 object selected maa 0 g Double click on the icon that corresponds to the DOSIMASS Dosimeter software in order to activate the software DOSIMASS NEW OF x File Edit Display DOSIMAS 5 DM 1 object select
20. Using the window pictured above the user can specify an installation folder other than that proposed as default This possibility allows the user to conduct several installations using the same PC 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined m One installation for the use of the LDM 2000 m One installation for LDM 210 220 m One installation for the use of the LDM 101 In order to select the default installation folder location and continue the installation procedure m Click on Next Subsequent steps in the procedure are reviewed in the next section entitled Installation Wrap up In order to customize the installation folder location and continue the installation procedure m Click on Browse The following window will appear Choose Folder X Flease choose the installation tolder Accessoires Fichiers communs Fre IGW Internet Connecti Network I Internet Explorer J Microsoft Exchange Drives E c disque prin m Select the name of the new installation folder under Path m Click on OK If the folder that you have selected does not exist the following window will appear 2 The
21. history This function key allows the user to record the Events History data displayed in a file bl This function key allows the user to read the Events History recorded in the Dosimeter A click on this key displays the current Events History for the Dosimeter or the most recent Events History if there is no current Events History for the Dosimeter Note upon each new reading of an Events History from the Dosimeter the following window appears 100081 reading summary amp EZPROM Cancel Ki A click on this key allows the user to read the previous Events History in the Dosimeter if several Events History were recorded in the Dosimeter This new Events History is older than the one initially displayed 102 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Print Once a history has been read this function key allows the user to print the Events History currently displayed The following information is printed a The Dosimeter Number or the name of the Events History file during a reading from a file m The Events History Period Note The date and time of the Events History start up The date time stamped l
22. required with the detector type used a longer response time is needed Therefore this feature is not recommended to be activated for personnel monitoring applicable to firmware versions 2 7 or greater Long Rate Algo if yes the beep rate is longer Primary Measurements this section regroups the parameters that enable primary measurement configuration Hp 10 Hp 0 07 type of measurement conducted by the detector Internal External Internal the measurement is conducted using the internal Dosimeter detector External the measurement Is carried out using an external detector that is linked to the Dosimeter With Without Antimicrophony the with antimicrophony option must always be selected so that impulses resulting from shocks to the Dosimeter are not interpreted as originating from radiation 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined o Ch1 Ch2 Ch3 measurement channels to validate in function of the measurement type i e Hp 10 extended measurement requires that both Ch1 and Chy2 must be validated Note DMC2000S Ch7 only Hp 10 gt 60 keV DMC2000X Ch1 and Ch2 Hp 10 gt 20 keV DMC2000XB Ch1 Ch2 and Ch3
23. setup will add program icons to the Program Folder listed below You may type anew folder name or select one from the existing Folders list Click Next to continue Program Folders MGF Instruments Application Existing Folders Accessoires Adobe Adobe Acrobat D marrage O oc To Hel EPSON Scanner Internet Explorer lomegay are Microsoft Office 4 2 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 2 3 1 Creation of a Program Folder The window displayed above enables the customization of the start up folder for the DOSIMASS Dosimeter Software This folder will automatically be placed in the Windows program folder It will contain all of the icons corresponding to the different software modules These icons will allow the user to start the different software modules using a simple double click of the mouse By default the folder will be called DOSIMASS To apply another name Select the new name in the section entitled Program Folders consult the following window Note the user can also select an existing program file This allows the user to regroup all of the software from the same manufacturer The user must
24. 1 Customized Software Configurations 11 1 Selection of another serial port During the automatic installation of the DOSIMASS Dosimeter Software the COM serial port is configured by default If the user is connected to another port select the appropriate serial port using the following procedure m Initialize the DOSINET Software by double clicking on the corresponding icon DOSIMASS NEW OF x File Edit Display T OSIMASS OM object selected BBBC g The main window of the DOSINET Software will appear DOSINET Network Miil x Fie Administration Setup Statistics Tools Help Statistics Folling Selecting Server Correct frames o Corrupted frames Corect frames Corrupted frames Correct frames jo Corrupted frames m Using the DOSINET main menu select Administration Identification in order to validate the Supervisor access level the procedure is identical to that used in the DOSIMASS Dosimeter Software however the passwords may not be identical m Next from the main menu select Setup Serial Link 128110A 123 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Statistics T
25. 4 4 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined For the DMC 90 DM 9X the following information is unavailable Corrupted Events History m EEPROM Fault m Optical Test Failed m External Detector Fault and m Warning s Acknowledged Note the following parameters have a different designation for the DMC 100 DMC 90 and DM 9x Internal Calibration Corrupted gt Initialization Parameters Corrupted External Calibration Corrupted gt Calibration Parameters Corrupted Operating Parameters 4 Dosimeter n 100135 DHC100 X Measures Operating ser cone Assign Status Param carwranons block System Factory Paused DM Displayed measures Display user Dose rate History fault in mrem 1 rem Format floating point Parameters Fate alarm enabled enabled warnings disabled Dose in autonomous added u oo Time alarm disabled Hisabled not acknowledge disabled Fast entry Autonomous mode enabled enabled Backlight disabled Tit enabled Alarms reported by flash Measured rates are maxirnum Low battery sound alarm always enabled Chirp rate never Audib
26. Assign Status EE tration block system Factory Task 0123 Identification 01 234FFFFFFF Entry date 18 Apr 2003 Entry time hoin 47 mon 33 S z p z History period 1 mn Restore initial dosimeter EEE o Save mliduratign configuration Reread dosimeter Read another dosimeter eee Se Exit Pa aaa aaa LT LEC LLL LE LLL LLL EL ELLE The following parameters are inaccessible m Assigned Dosimeter m Assignment Date Activated ILS Status 4 Dosimeter n 135592 DMC100 E Weasures l Operating User n Assign Status e oaneratons block System Factory M Low battery EEPROM fault Autonomous mode History saturation Satellite mode exited Time 100h l Rate saturation initialisation corrupted Dose saturation calibration corrupted Power lost Optical test failed Detector fault External detector fault Corrupted history Load configuration configuration Restore initial dosimeter Reread dosimeter Fead another dosimeter Write Chl m Warning s acknowledged 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 9
27. Dosimeter Software If by accidental manipulation the software disappears press repeatedly on the ALT TAB keys in order to select the DOSIMASS_DM icon then release the keys see the illustration below DOSIMASS DM 18 06 1999 06 41 23 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 128110A Dosimass DM Error Style not defined 4 Configuration of a Dosimeter 4 1 Introduction This chapter provides the procedure that allows a user to configure a Dosimeter As such it provides the information that enables access to the Configuration window and allows a user to become proficient in the entire array of related functions read write parameters downloading and saving parameter files etc It does not review the description of the accessible Dosimeter parameters This information is provided in a later chapter Dosimeter Parameters page 56 This chapter can be broken down into the following elements m Access to the Configuration window m Description of the Configuration window m Readout and display of the entire array of parameters of a Dosimeter Modification of these parameters m Downloading Dosimeter parameters from a file and m Saving Dosimet
28. Internet Explorer lomegqavare Microsoft Office 4 2 17 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 2 3 6 Selection of the Software Modules The window above allows the user to designate the software modules that must be installed Each option enables a specific selection 000 E d d d Typical This option mandates the installation of all of the software modules DOSIMASS Dosimeter and DOSINET and DOSIMASS Reader Please Note not all installation CD s contain this option Compact This option only enables the installation of the software modules that are necessary for the operation of the DOSIMASS Dosimeter Software while minimizing the required disk space DOSIMASS Dosimeter and DOSINET Custom This option allows the user to proceed with the selective installation of one or several modules DOSIMASS Dosimeter or DOSINET or DOSIMASS Reader Please Note not all installation CD s contain this option To continue with the installation of the DOSIMASS Dosimeter Software Select the compact installation option Click on Next The following window will appear select Program Folder x 18
29. The DMC 100 the DM assigned checkbox is not available and the display in pause will display either the word pause or the user display if selected in the operating parameters for the dosimeter The assignment date current mode is also not available w Dosimeter n 803959 DMC90 E Joj x User display 0904900 Identification 00000000000 Task OOOO optional parameters Warming if your dosimeter it used by a centralized system some dosimeter parameters may be overwritten by the system Contact MGPI for guidance Cancel For the DMC 90 the DM assigned checkbox is not available and the display in pause will display either the word pause or the user display if selected in the operating parameters for the dosimeter The assignment date current mode history period options are also not available After the write is selected the operator is prompted to remove the dosimeter Remove dosimeter Cancel Once assignment is complete or the operator is requested to insert dosimeter LDM 101 Reader 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 9 Operation of the Events History Menu Option 9 1 Introduction This c
30. X License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement Warning This software is protected under copyright law and by International convention Reproduction or distribution of this software in whole or in part by any means or in any Porn is strictly prohibited and any person who does so shall be considered guilty of copyright infringement and shall be lable to criminal prosecution as provided for by the law zl Do you accept all the terme of the preceding License Agreement Ifyou choose No the setup will close To install DOSIMASS you must accept this agreement Installshield Note Dosimass DM during the installation procedure numerous windows that contain a lt lt back gt gt button will appear This option allows the user to return to the previous window and modify the parameters or cancel the parameter modifications that were initially selected m Click on Yes to accept the terms of the contract The following window appears Choose Destination Location setup will install DOSIMASS in the following folder To install to this folder click Mext ou can choose notto install DOSIMASS by clicking Cancel to exit setup Choice of Installation Folder Location To install to a differentfolder click Browse and select another folder Destination Folder C Program Files DOSIMAsSS Browse Cancel
31. a dosimeter Cancel 128110A 91 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Position the Dosimeter within close proximity of the reader When using a Dosimeter with an LDM 107 Cancel Insert a dosimeter Insert the Dosimeter into the LDM 101 The following window will appear briefly 100081 reading mesurements thres amp assignmerr Cancel The following window will then appear 4 Dosimeter 189628 DMC2000S Dose Alarm triggered g Rate Alarm triggered eo Dose warning triggered a Rate warning triggered a Time Alarm triggered D Primary Dose 1 1 mrem Primary Rate 1 52E 2 mrem h Duration 0 h 3 mn 10ls Dosimass DM The alarms are signaled by red and orange lights that are located in the upper portion of the window When a button remains gray then the corresponding alarm was not activated during the last visit into the controlled area The primary measurements are displayed m To deactivate the Dosimeter Click on or press enter The following window will appear Remove dosimeter cance 92 128110A Publication traduction
32. auras a conus dexwe ecbede eels AT E 103 9 6 1 Froma DOSIMEGICN 2 lt 0esccticnccecaatsdeancixd E wide tock ante Uncle Saale a Ea eat eninke 103 902 VOU NG aici ecinseseaecspaversexddcedteuees A 103 9 7 Display of Aistorncal Events arisane niea a Aa A NT 105 9 8 Summa DIS DIAY seceingewer gt coat tsatet ela leetn ted tcan tucariaareevod pataoustuestaietieieesaden toeaeueionatenccess 106 128110A VII Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Table of Contents 9 9 Historie Display In Graphic ForMalina A E A SS 107 9 9 1 Navigation of the Cursor and Pointer ccccccccceseeeceeeececeseeeeeeeeeneeseeesaues 108 9 9 2 Zooming an Area using the Magnifying GIaSS cc cece ceccceececeeeeeeeeeeeeaees 109 9 9 3 Visualization of Historical Events sssrinin iea A 111 O70 IPEIMTIAG An EV GTAUS AIS OMY ciate tt ects E E utd aeiewtetartacesiete 111 9 11 EXPONO ANISTON TG erie cuteat tun shoe tan se bate teerseten a ties ide tick tak eet D cuee an Stet deet us att 112 9 1 Reading an Events History Directly in E2ZPROM ccc cccccecceseeeeeeeseeeeeeeeeeeeseeeeaes 113 10 DIAGNOSTICS arrena aa 115 10 1 Operator Message Scenina S 115 101 1 Commom Examples nes
33. continue Dosimass DM er will pear The file copy process will be executed During the file download the following windows will appear The user should simply follow the recommendations indicated in these windows Once the installation is complete the following dialog box will appear System Settings Change Ej 2 You must restart your computer before the new settings will take effect Do you want to restart your computer now m Click on No The user can now proceed with the Dial Up Adapter installation see Installation of the Dial Up adapter page 125 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 128110A Dosimass DM 13 Appendix 3 Events History Supplementary Information 13 1 13 1 1 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C List of Events in an Events History The list of primary events is presented below for the purposes of information These events are separated by type Ala
34. de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined All of the current parameters are stored into the Dosimeter memory Note If any parameters were modified in sections other than the current section they will also be stored into the Dosimeter memory 4 6 Downloading Parameters from a File This function allows the user to select a previously defined Configuration File and to download the corresponding parameters into the Configuration window This function is accessible from the Configuration window see Access to the Configuration Window page 51 The procedure is as follows Load m From the Configuration window click on tonfiguration The following window will appear Apply configuration file Ei x reer LC Dosimass Look in E Dosimass S ci Ell Files of type 1 dm r Cancel Select the directory into which the configuration files are placed using the Browse scroll down window feature All of the configuration files will be displayed extension DM Select the configuration file to be loaded and m Click on Load The window will disappear The parameters contained in this configuration file will replace the values previously displayed in all of the sections of the Configuration window 128110A 59 Publication traduction et reprodu
35. defined o the tens digit position to lt lt 0 gt gt using the upper coding wheel u n a RESET eo SECTEUR SECTOR tens digit ADRESSE o READER LECTEUR AnnREce ones digit 2 2 2 Hardware Configuration with an LDM 101 2 2 2 1 Connecting the PC to the LDM 101 m Connect the COM1 serial port to the LDM 101 serial port using the standard serial cable supplied with the reader This cable is equipped with a 9 pin male connector DB9 and a 9 pin female connector DB9 m Connect the electrical cord to the outlet adapter using a 5 prong DIN connector at the back of the LDM 101 m Plug the electrical cord into an outlet Note when using a serial port other than COM1 a DOSINET software configuration is required Consult the section entitled Selection of a Different Serial Port page 109 2 2 2 2 Selecting the Address of the LDM 101 Each LDM1071 is identified by an address that is defined by digits from 0 to 7 In the context of the utilization with the DOSIMASS Dosimeter software the value of this address must be equal to lt lt 0 gt gt Typically each LDM 101 is delivered with a pre programmed address of lt lt 0 gt gt In the case of problems associated with this address consult the LDM 101 Technical Manual or an MGP Instruments representative 128110A 9 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de n
36. folder capplmapidosimass does not exist Do you want the folderto be created m Click on Yes 128110A 15 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 2 3 4 Installation Wrap up The following window will appear Choose Destination Location setup will install DOSIMASS tn the following folder To install to this folder click Mext To install to a different tolder click Browse and select another folder fou can choose notto Install DOSIMASS by clicking Cancel to ext Setup Destination Folder capplmgplcdoasimass lt Back Next gt Cancel m Click on Next in order to continue the installation procedure in the selected folder which is indicated in the Destination Folder section The following dialog box will appear It allows reassigning the serial number InstallShield Wizard Customer Information Please enter your information Please enter your name the name of the company for whom you work and the product seal number User Hame MGA Company Name MGPI Serial Number lRetallShreld Back Hests Cancel 16 128110A Publication traduction et reproductio
37. i ror o0 2 Start Dose increm Acumulated dose Calculated Rate Dose diff between cursors End Jan 1998 145511 P2 Jan 1998 15 1131 OO os OO O CO eoe E 22 Jan 1998 15 27 41 Thu 22 Jan 1998 15 17 16 Out of AT mode l switched to AUT hu 22 Jan 1998 15 16 46 power loss Thu 22 Jan 1998 15 16 40 marked by 34 1 3 Acumulated dose Thu 22 Jan 1998 15 13 16 marked by 12 1 3 F a al Q oag ave F i a e immar wrap AK Eyi aan ra be H ae PEA xit history history wade Print 4 This window contains the main elements listed below Key Calculated Rate Dose increments 1 Display area A portion of history window reserved for the graphic representation of the Events History which contains the following elements Red Bars dose increments Pink Continuous Curve cumulative dose Blue Continuous Curve calculated rate based on dose increments processed Black and Black squares historical events in the Events History Blue cursor and black movable pointer the Y Axis a logarithmic scale and the same display units used in other functions of the software The X Axis the axis of time where each increment is positioned chronologically 2 Values Area A portion of the history window reserved for numeric data relative to Date and time of the start of the Events History Date and time corresponding to the position of the cursor 128110A 107 Publication tr
38. may also be defined DM assigned User display 555016 Identification 225018 Task BRSOIP optional parameters Warming ifyour dosimeter is used by a satellite aed ial Current mode Satelite centralized system same dosimeter parameters may be overwritten by the History period SE rin system Contact MGFI for guidance Cancel Tools Menu This menu provides access to the Log File Dosimass Event Log Img Help Event Log Event Log The Event Log is a file that continuously records all of the events relative to software operations onto the hard disk of the PC e g client connection messages problems encountered at the time of the connection setup activation deactivation etc 45 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 3 4 6 3 4 6 1 46 Dosimass DM These events are clearly identified by a label and are time date stamped If the need arises these records will facilitate a joint problem analysis by the user and MGP Instruments In order to access this function activate the Tools Event Log option from the main menu This Event Log opens using a Windows application E loafile bc NotePad
39. nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 5 3 3 Status 4 Dosimeter n 236837 DMC20005 ET mer Oe A oer Assign Status Ek Calibrations ee a Hock System Factory T Low battery EEPROM fault Autonomous mode History saturation Satellite mode exited Time 100h Rate saturation Internal calibration corrupted Dose saturation External calibration corrupted Power lost Optical test failed Detector fault External detector fault Corrupted history Warningfs acknowledged T lls Restore initial dosimeter Read another dosimeter sad E Save animras eread configuration dosimeter EEEE OEEC thither reed The entire array of detailed information relative to the Dosimeter status recorded in the Dosimeter is accessible 5 3 4 Operating Parameters 4 Dosimeter n 206635 DMC20005 TEE ol aa i eons Assign Status Param camranons aE aire aE System Factory Faused DM Displayed measures Lisplay luser mienia reported my ft 1 pov Te ee PTET sey Parameters invisible Fate alarm enabled enabled Warnings enabled enabled Dose in autonomous zeroed Time alarm enabled acknowledge Fast entry disabled sonore Rate Alarm latched disabled Curren
40. not defined 10 Diagnostics This chapter is designed to provide a diagnostic tool that responds to the majority of troubleshooting scenarios that might be encountered by a potential user It also addresses the aspect of hot keys and keyboard shortcuts 10 1 Operator Messages The operator messages appear in the form of a dialog box containing a message for the attention of the user Most of these messages are explicit and need no further commentary The following are presented below m Examples of common dialog boxes m A table that provides the list of primary messages accompanied by information on the nature of the problem encountered and the required user intervention 10 1 1 Common Examples Problem with the connection between the Dosimeter reader and the PC The preceding message appears when there is data exchange trouble between the PC and the Dosimeter reader Required User Intervention Verify that the m Dosimeter reader is turned On and has power m The connection cable between the Dosimeter reader and the PC is correctly connected serial port COM1 m The address of the Dosimeter reader is correct 1 for LDM 2000 0 for LDM 101 128110A 115 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without ou
41. or an existing INTERNET modem access this protocol is already installed If TCP IP is not installed the procedure to follow for the installation of this protocol is reviewed in the section entitled Appendix 2 Installation of the TCP IP Protocol page 125 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 2 3 Installation of the Software The DOSIMASS Dosimeter software is delivered with a CD ROM that contains the DOSIMASS reader and DOSINET Software Note During the installation of DOSIMASS DM it is necessary to install DOSINET The installation of DOSIMASS reader is optional The installation procedure consists of inserting and executing the installation program setup exe into the reader and following the directives issued in the following sections Once the installation is finished the array of installed software modules is accessible in several ways m Using the icons placed on the file located on the desktop m Using the Windows Start menu and or m Using Windows Explorer to select the executable files placed in the installation directories Note Using Windows Explorer to select the executable files
42. ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 10 2 Keyboard Shortcuts Hotkeys Because they become accustomed to the easy use of scroll down and drop down menus users sometimes forget the availability of keyboard shortcuts and hotkeys These shortcuts enable rapid access to the most frequently used functions Function Keyboard Shortcut Return to Operator access Ctrl D level Access level management Ctrl F4 Administrator Access level only Exit the DOSIMASS Dosimeter Ctrl Q Software 128110A 121 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Blank page 122 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 11 Appendix
43. parameters are not accessible dependant on the dosimeter and reader type used Remove dosimeter cancel Once the assignment is complete the reader then searches for another dosimeter 8 2 Assignment of the DMC 2000 using an LDM 101 Reader a Dosimeter n 263007 DMC2000X d ioj x DM assigned M User display TEST Identification QOO000000000 Task OOO0 optional parameters Se rennntane satellite Waning gt iF your dosimeter is used by a centralized system some dosimeter parameters may be oversten by the History period 1 mn system Contact MGPI for guidance Cancel For the DMC 2000 The Assignment date field is not accessible through the LDM 101 reader 8 3 Assignment of a DMC 100 90 using an LDM 101 Reader W Dosimeter n 135589 DMC100 o x Userdisplay 01401 Identification 135338FFFFFF Task f optional parameters Warming if your dosimeter is used by a centralized system some dosimeter parameters may be overwritten by the History period a mr sustem Contact MGPI for guidance Cancel 128110A 97 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 98 Error Style not defined Dosimass DM For
44. partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 15 13 01 0 5 mrem 15 12 51 0 5 mrem 15 12 41 0 6 mrem La dee Sa O 5 mrem ee ee O 5 mrem 15 12 11 0 6 mrem 15 12 01 0 5 mrem TSI gL 0 5 mrem 15 11 41 0 5 mrem 15 11 31 0 5 mrem ol eee Le eel O 5 mrem aL O 5 meem 15 11 01 0 5 mrem 15 10 51 0 5 mrem 15 10 41 0 6 mrem 15 10 31 0 5 mrem 15 10 21 O 6 meem 15 10 11 0 5 mrem 15 10 01 0 5 mrem 15 09 51 0 6 mrem 15 09 41 0 5 mrem 15 09 31 0 5 mrem 15 09 21 0 6 mrem 15 09 11 0 5 mrem 15 09 01 0 5 mrem 15 08 51 0 5 mrem 15 08 41 0 5 meem 15 08 31 0 5 mrem 15 08 21 0 6 mrem 15 08 11 0 6 mrem 15 08 01 0 6 mrem 15 07 51 0 5 mrem 15 07 41 0 5 mrem 15 07 31 0 6 mrem 15 07 21 0 5 mrem L5 ar LL 0 5 mrem 15 07 01 0 5 mrem 15 06 51 0 6 mrem 15 06 41 O 5 mrem 15 06 31 0 5 mrem 15 06 21 0 5 mrem 15 06 11 0 5 Meem 15 06 07 O 5 mrem 15 05 51 O 5 mrem 15 05 41 0 5 mrem 15 05 31 O 6 mrem 15 05 21 0 5 mrem 15 05 11 0 6 mrem 15 05 01 O 6 mrem 15 04 51 0 5 mrem 15 04 41 0 5 mrem 15 04 31 0 6 mrem 15 04 21 0 5 mrem 128110A 139 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or repr
45. placed in the installation directories Each installation is valid for A specific type of Dosimeter Reader LDM 2000 or LDM 101 and A specific language used French or English All subsequent modifications changing the type of Reader or the language used typically requires a new installation If the use of the DOSIMASS Dosimeter software is desired with two different types of readers then it is recommended that the application be installed twice and the installer must specify two different installation directories 2 3 1 Installation Start up Advisory before beginning the installation procedure the user is advised to quit all other applications in progress In order to install the DOSIMASS Dosimeter software the user should execute the following instructions 1 Insert the DOSIMASS Dosimeter Software Installation CD ROM and 2 Using Windows Explorer consult the illustration below execute the setup exe installation program which is accessible from the main directory of the CD ROM reader by double clicking on the corresponding file 128110A 11 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined EX Exploring DOSIVIEW_SUITE F Desktop 4 M
46. publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Rate Warning If the corresponding light is orange then the Rate Warning was activated during the last entry into the controlled area Note the display of alarms and alerts is produced regardless of the origin i e either Primary or Secondary Measurements Primary and Secondary Measurements Certain models of Dosimeter DMC 2000XB etc can simultaneously perform two different measurements a primary and a secondary measurement Other models DMC 2000S DMC 2000X can only carry out the primary measurement Information relating to these two measurements is grouped in two different areas identified respectively by the labels Primary Measurements and Secondary Measurements The measurement and threshold values are expressed in units that are user set at the time of the DOSIMASS Dosimeter software configuration regardless of the units used by the Dosimeter itself see General Parameters page 67 The software makes the necessary mathematical conversions between radiological units Primary Measurements this non modifiable field provides the following information relative to the primary measures o Measurement Origin internal the measurement is performed by the Dosimeter s internal detector or external the measurement is carried out by an ext
47. secondary dose warning 1 00E 2 rer secondary rate warning 7 008 3 a 4 Load Reread Restore Fead another Write Dh configuration configuration dosimeter initial dosimeter dosimeter This window includes the following elements 1 A title bar that includes the Dosimeter number and the Dosimeter type 2 A series of tabs which provide access to the different sections These sections group Dosimeter parameters of similar type The sections are identified by label The use of the tabs allows a user immediate access to these parameters 3 An area which displays the entire array of parameters of similar type The example provided above corresponds to the section entitled Measures and Thresholds pages 62 77 and 81 4 A series of function keys that enable the use of the Configuration window 5 Only displayed when dosimeter is with secondary measurement 128110A 53 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 4 3 1 Tabs Dosimass DM The different types of parameters regrouped under a single tab are as follows Measures amp Thresholds a peering Paral inal 54 000 E E 00 0 E Potential Activation of ala
48. simply highlight the folder name in the Existing Folder section and double click on the folder name in order to activate the selection Select Program Folder x Setup will add program icons to the Program Folder listed below ou may type a new tolder name or select one from the existing Folders list Click Nextto continue Frogram Folders MGF Instruments Application Existing Folders Adobe Acrobat D marrage Ooc To Help Dosimass EPSON Scanner Internet Explorer lomeqavyare Microsoft Office 42 m Validate the name of the Program Folder by clicking on Next 128110A 19 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 2 3 8 Selection of the Type of Dosimeter Reader Once the installation of the various files is complete the following window will appear InstallShield Wizard Setup Type Choose the setup type that best suits pour needs Please chose the reader used C LOM 101 f LOM 220 C LOM 2000 Back Cancel After the user validates their choice the following window will appear InstallShield Wizard Please chose the serial port used You must type ina number 1 for con for exa
49. wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM User license provided to ped aa WiFI Seral 1235456 DOSINET Version gt 734E 10 Oct 2000 Copyright 1996 2000 MGF Instruments Double click on the icon that corresponds to the DOSIMASS Dosimeter software in order to activate the software User license provided to Hame Entreprise Serial 0123456789 DOSIMASS DOhl Version 23 k 05 Noy 2003 Copyright 1996 2003 MGF Instruments 30 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 2 5 Shutdown of the Software Modules The procedure below indicates how to shutdown the array of software modules DOSIMASS Dosimeter and DOSINET In certain cases the shutdown of the entire array of software modules can prove necessary in order to reboot the system for example following a hardware installation modification 2 5 1 Shutdown of the DOSIMASS Dosimeter Software Module mE From the main menu select File Exit The following window will appear Are you sure you wantto quit DOSIMASS DM Cancel m Click on Exit
50. 1 3 5 Advisories Reminders and Notes cccceecececececeeeeeeeeeeeeeececeeeeeeereeeaenenenenes 3 1 4 SoftWare Descrip Nkenesnn a A eaten 3 LAL Feat eS eaen a A N O 3 1 4 2 Compatibility with previous generation Products ccccceceeeceeeeeeeeeeeeteeeeeeeees 4 1 4 3 Compatibility with DMC_MANAGER DMC_USER and DMC_ HISTO Software 4 Waa SC OMPMOUNATIONS eonen dec ine de Nichatna Soe a a ede 5 2 MASS STORAGE HARD INSTALLATION AND START UP cc cceeseeeeeeeeeeeeeee 7 2 1 Required Hardware Configuration cccccccccssccssceceeecseeseeeceeeeseeesegeceeseseeeeseeseeesseeeees T 2 2 HardWare Installation onvacensiauSeennnsteadinannacenncusatirstsagiradea toads aisle nts santantans Sacaseantsiantobeastdeanintes 8 2 2 1 Hardware Configuration with an LDM 2000 ccccccccceccceeeeceeeseeeseeeeeeeeeaness 8 2 2 2 Hardware Configuration with an LDM 101 ccc ceccceecceeeeceeeeeeeeeeeeeseeeeeees 9 2 2 3 Device Configuration with LDM210 cc ccccccccececeeeeseeeseeeeseeeseeeeeeeeseeeeaes 10 2 2 4 Device Configuration with LDM220 c ccc ccccccccececeeeseeeceeeseeeeseeeeeneeseeeeaes 10 2 2 5 Installation of the TCP IP Protocol ccccccccsecceeeeeeeeeete cece eeeseeeeeeaeeeaeeeeeees 10 2 3 Installation Of the Software ccc cccccecceeeceeeceeeceeeeeeeceeeceeeteeeeaeeeseeeeeeeeeeeeeeeeeteeeteeenaeees 11 2 52 MASTAIATION SAUD nsa a aa S 11 2932 LANGUAGES
51. 10A 137 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 15 21 01 0 3 mrem 15 20 51 0 2 Meem 15 20 41 0 1 mrem 15 20 31 0 2 mrem 15 20 21 0 1 mrem 15 20 11 0 1 mrem 15 20 01 0 2 Meem 15 19 51 0 1 mrem 15 19 41 1 1 mrem 15 19 31 0 1 mrem 15 19 21 0 1 mrem 15 19 11 0 1 mrem 15 19 01 J 2 mrem 15 18 51 0 1 mrem 15 18 41 0 1 mrem 15 18 31 0 1 mrem 15 18 21 0 1 mrem 15 18 11 0 1 mrem 15 18 01 0 2 mrem 15 17 51 0 2 mrem 15 17 41 0 2 mrem 15 17 31 0 1 mrem LytLrizl D 2 mrem ele eta Magog le out of SAT mode switched to AUT 15 17 11 0 1 mrem L Lr SUL z 0 2 mrem 15 16 51 0 5 mrem 15 16 48 power Joss Ta lesti O 5 mrem 15 16 40 marked by 34 1 3 15 16 31 0 5 mrem 15 16 21 0 5 mrem 15 18 11 0 5 mrem 15 18 01 0 5 mrem L52157 5L O 6 mrem 15 15 41 O 5 mrem 15 15 41 O 5 mrem 15 15 21 O 6 mrem 15 15 11 0 5 mrem 15 15 01 0 5 mrem 15 14 51 O 6 mrem 15 14 41 O 5 mrem 15 14 41 O 5 mrem 15 14 21 0 5 mrem 15 14 11 O 6 mrem 15 14 01 0 5 mrem 15 13 51 0 5 mrem 15 13 41 O 5 mrem doe Ree D O 6 mrem 15 13 21 O 6 mrem 15 13 16 marked by 12 1 33 15 13 11 O 5 mrem 138 128110A Publication traduction et reproduction totales ou
52. 110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined SLV RMT Note The elements of the displayed message have the following meaning SLV The LDM 2000 reader is in Configuration or Slave mode RMT The LDM 2000 reader is in Remote mode it acts as a reader station controlled by Dosimass Software For further information regarding various reader displays refer to the LDM 2000 User s Manual If SLV or RMT is not displayed on the bottom left hand side of the display then the connection between the PC and the reader is not operational If this is the case then the user must determine that the hardware has been installed correctly by verifying the following m The COM1 port of the PC is used for the LDM 2000 connection m The physical address of the reader is set at lt lt 1 gt gt m The cable is indeed a DB9 type serial communication cable For additional information consult the section entitled Hardware Configuration with an LDM 2000 page 13 2 4 2 Start up using the Windows Start Menu Bar The user can also start the DOSIMASS Dosimeter software using the Windows Start menu bar consult the illustration pro
53. 175C Error Style not defined Dosimass DM The following window will appear Select Network Protocol OOO O OE i Click the Network Protocol that you want to install then click OK Ifyou have i an installation disk for this device click Have Disk Manufacturers Network Protocols Fast Infrared Protocol PSS PS compatible Protocol S Microsoft 32 bit DLC Microsoft OLE TS NetBEUI Have Disk m Inthe Manufacturers window select Microsoft m Inthe Network Protocols window select TCP IP and m Click on OK The Network window will appear again Network F Configuration Identification Access Control at i The following network components are installed Client for Microsoft Networks 3Com EtherLink Ill FEMEIA SC589B SC589C Dial Up Adapter Dial Up Adapter 2 VPN Support ae ie Microsoft Virtual Private Networking Adapter 7 SE r ee i Remove Fiopenies ie Primary Network Logon i a Client for Microsoft Networks s Pal Eile and Print Sharing Shin Description DK a This time the Dial Up Adapter and the TCP IP should be visible in the upper window m Click on OK in order to reinitiate the file copy If the Windows installation disks are not installed the user will be prompted to insert the disks at this time CD ROMs for example In this case the following window will appear 128 128110A Publication traduction et reproduction to
54. 2 485 Port Connecting the PC to the LDM 2000 The physical connection between the PC and the LDM 2000 consists of connecting the COM 1 serial port to the RS232 485 port of the reader see the illustration above using a DB9 type serial communication cable Note When using a serial port other than COM1 a DOSINET software configuration is required Consult the section entitled Selection of a Different Serial Port page 123 For additional information regarding the specific type of cable contact MGP Instruments Selecting the Address of the LDM 2000 Each LDM 2000 is identified by an address that is defined by digits from 00 to 99 This address is used in the context of a centralized Dosimetry system In the context of the utilization with the DOSIMASS Dosimeter software the value of this address must be equal to lt lt 01 gt gt In order to program this address refer to the illustration below m Remove the side protection plaque by unscrewing the 2 attachment screws m Using a small screwdriver position o the ones digit position to lt lt 1 gt gt using the lower coding wheel 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not
55. ASS DM For additional information concerning the start up of the software see Start up of the DOSIMASS Dosimeter Software page 24 DOSIMASS NEW OF x File Edit Display DOSIMAS S DM 1 object selected Bl7 g The main screen is comprised of a window that contains the following elements see the diagram below m A title bar 1 which contains the following information O Current access level 2 in this case Manufacturer level Note when the current access level is Operator no access level information is displayed 128110A 35 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 3 4 3 4 1 36 O Name of the software 3 in this case DOSIMASS Dosimeter o Date and time 4 and o Communication operating mode 5 Hands Free in the case of an LDM 2000 and Infrared in the case of an LDM 101 or an LDM 91 m A menu bar 6 which provides access to the array of available functions and m A blank area 7 that is designed to house the windows relative to the different functions 1 2 3 4 5 Eille Administration Setup Dosimeter Tools Help Functions Accessible from the Menu Bar The arra
56. C Error Style not defined Dosimass DM LDM220 Dosimeter Reader model 220 Dosimeter reader that operates in the hands free mode used as a USB interface for the configuration of the DMC 2000 family dosimeters and for access control in a centralized dosimetry LDM91 Dosimeter Reader model 91 Dosimeter reader that operates in the infra red mode used as an interface for the configuration of the DMC100 DMC90 and DM9X family dosimeters and for access control in a centralized dosimetry Hands Free See hands free mode Marking Action that uses the unidirectional hands free communication mode reader to dosimeter After being marked the dosimeter receives the reader identification information and stores this data along with the date time in the histogram No acknowledgement from the dosimeter is required Infra red Mode Means of infra red communication used mainly for the exchange of data between a DMC X family dosimeter and an LDM101 reader Hands Free Mode Means of wireless low frequency communication used mainly for the exchange of data between a DMC 2000 family dosimeter and an LDM 2XX reader PC IBM compatible PC PAUSE The Dosimeter displays PAUSE and has been deactivated Time in zone Time interval while the dosimeter user is inside the controlled zone During this time the dosimeter must be active and can be marked Exit from zone The term exit from zone is a means to define removing a dosimeter from a contr
57. CNOICS spssnusne p e 12 2 3 3 Choice of Installation Folder Location ccc eccceccceecceeeseeeeeeteeeteeeeeeteeeaaes 14 234 WStAIIATION VV ADU Dicks forcast coes Spinsiae titties se asl caecdasacdsbestriaees eae S 16 2 3 5 Registration of the Serial Number ccccccccceeccc sees eeeeseeseeeeseceseeeeseeseeeeaes 17 2 3 6 Selection of the Software MOdUIEeS ccccccccceececeeeeeeeeceeeeeeeseeeseeeeseeeseeeeaes 18 237 CfeatlOn Ol a Program POS leccscezisnteeca de alee a T cess 19 2 3 8 Selection of the Type of Dosimeter Reader ccecceeceeeeceeeeeeeeeeeeeeeeeeeneees 20 2 3 9 Installing the TCP IP Protocol during the Installation of the DOSIMASS DOS IMELEL SOMW AN 6 vais ees had asad ered ociat rae a cata anenedusennntansontuaate dev aeealameanmeeaseatins 21 2 3 10 Completing the Installation Procedure cccccccccecceeececeeeeeseeseeeseeeeaeeseeeeaes 22 Zod IAStAAIONMCOMP ClS erccisiracceancsauiienscicetue wiesn satis paadewee ances tues AA T 23 2 3 12 2 3 11 Access to the DOSIMASS Software Modules ccccccseceeeeeeeeeeees 24 2 4 Start up of the DOSIMASS Dosimeter Software cccccccceccceeeseeseeseesseeseeeaseeaaes 24 2 4 1 Start up using Windows Desktop cccccccceccseeeseeeeeeeeseteeeseeeeeeeseeeaeeaseeeaes 25 2 4 2 Start up using the Windows Start Menu Bat ccccccceceseeeeeeeeeeeeeeeseeeeeees 27 2 4 3 Startup using Windows Desktop for use with
58. DM 2000 Green light YY transmission In normal operation this light blinks rapidly which indicates the correct operation of the reader This blinking corresponds to the transmission 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Operator Message Label Reader does not respond Two passwords are different Incorrect reading size Saturated Memory Insufficient Memory Password Incorrect Insufficient Access Level Access Level Required current level Unknown access level Inconsistent DM numbers transmitted received No TCP Connection to the DOSINET 128110A Error Style not defined Diagnostic Tool See of messages to any Dosimeters present in its vicinity Red Light W reception This light is briefly illuminated when the messages coming from a Dosimeter in its vicinity are received If this light does not function this means that the DMC 2000 is not transmitting any information to the LDM 2000 In this case verify the correct operation of the DMC 2000 consult the DMC 2000 User s Manual the message Reader could not synchronize with a DM Cause erroneous input during the typing of the two passwords The two password
59. Dose increments Thu 22 Jan 1998 15 27 31 13 3 Example of a printed histogram An example of a histogram printout is reproduced here 136 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Dosimeter n 200002 e softtsDosimass_kK exes HIS S4mMPLle HIS History period 10 5 Start date amp time Thu 2 Jan 1998 14 55 11 alarms amp anomalies events amp faults Tracking events E Ses et ee bose increments Thu 22 Jan 1998 15 27 31 0 1 mrem Lee rae O 2 Meem 15 27 11 0 2 Meem Laer Sk 0 2 mrem 15 26 51 0 1 mrem 15 28 41 0 2 mrem 15 26 41 0 1 mrem 15 28 21 0 2 Meem 15 26 17 0 2 Meem 15 28 01 0 2 Meem 15 25 51 0 1 mrem 15 25 41 0 2 Meem 15 25 31 0 2 Meem 15325321 D 2 Meem ee eo ak 0 3 mrem 15 25 01 0 2 Meem 15 24 51 0 1 mrem 15 24 41 0 3 Mre em l5 24 31 0 2 mrem 15 24 21 0 2 MF em 15 24 11 0 1 mrem 15 24 01 0 2 Meem 153237551 0 2 Meem l5 23 41 0 2 mrem l15 23 131 0 2 mrem l15 23 121 0 2 Meem 15 23 11 0 2 MF em 152237071 0 2 Meem ae O 2 mrem 15 22 41 0 2 MF em l5 22131 0 2 Meem l15 22121 0 2 MF em 15 22 11 0 2 Meem l5 22 01 O 2 mrem a2 O 2 Meem 15 21 41 0 1 mrem 15 21 31 0 2 ME em Lisek Sees 0 2 Meem 1281
60. Dosimetry Software DOSI MASS DOSImeter Maintenance and Setup Software U User s a Dosimeter n 18962786 DMC20005 Wleasures 4 Status Operating Ge erties Iser ET ete Man ual amp Thresh ssign aae Param Zones block Tem L Dose alarm Rate alarm Dose warming an Rate warning Primary measurements Internal Internal Hpi 0y 0 Primary dose 1 1 mrem Primary rate 1 52E 2 mremsh Primary dose threshold 3 00E 1 mrem Primary rate threshold 1 00E 1 mremnh Primary dose warning 2 008 7 Hire Primane rate warning 3 008 0 renr Time 0 n 3 mn 10 5 Time threshold 3 h 0 mn Secondary measurements Hpi Secondary dose mem Secondary rate 0 00E 0 mrem h Secondary dase threshold 4 44e 5 mrem Secondary rate threshold 49 4949E 4 mrem secondary dose warning 7 008 2 men Secondary rate warning 7 008 5 MERR Load Save Reread Restore Read another write Dh are configuration configuration dosimeter initial dosimeter dosimeter 4 Dosimeter n 189628 DMC20005 Dose increm Acumulated dose Rate Dose diff between cursors Start pz Feb 2000 14 48 19 02 Feb 2000 14 48 56 Feb 2000 14 48 56 perea seq 1 Ee 1 20E 1 ba Feb 2000 14 49 59 wiied OF Feb 2000 14 46 56 Wed Of Feb 2000 14 45 45 rate warning rete alarm Dose increments Wed G2 Feb 2000 14 46 44 rate warning ends Accumulated dose Wed O02 Feb 2000 14 45 25 rate warning Wed O2 Feb 2000 14 47 58 Primary dose time preset ends El Lo
61. E 3 menr Time 15 h 7 mn 58 s Time threshold 94 h 0 mn secondary measurements Internal Hpi Secondary doze 0 0 mem Secondary rate 0 00E 0 mremsh Secondary dose threshold 9 99E 5 mrem Secondary rate threshold 9 99E 4 mrem secondary dose warning f 0GE amp meem secondary rata warning 7 008 3 mre Load configuration configuration Restore initial dosimeter Reread dosimeter Read another Write Chl i dosimeter Alarms and Alerts The alarms and alerts that are produced during the last visit into a controlled area are signaled by red and orange colored lights that are located in the upper portion of the window under the tabs When a button remains gray the corresponding alarm was not activated during the last visit Dose Alarm If the corresponding light is red then the Dose Alarm was activated during the last entry into the controlled area Dose Warning If the corresponding light is orange then the Dose Warning was activated during the last entry into the controlled area Time Alarm If the corresponding light is orange then the Time Alarm was activated during the last entry into the controlled area Rate Alarm If the corresponding light is red then the Rate Alarm was activated during the last entry into the controlled area 62 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The
62. EI Low battery autonomy in RUN Total dose 00 mrem pi Loaded battery required level Hix ee Unloaded battery required level 140 Calib Mode M Low rate algo Rate Al beep long Fa Comb 100 Primary measurements secondary measurements Th htt fo PRECN 4 Heto intemal e disabled mena TMMAX 120 PRECM fea without antimicraphany M Ch3 Hgo internal x CH3 TNINT BE BLD Load S configuration configuration Restore initial dosimeter Reread dosimeter Fead another dosimeter write Dil E2PROM reading window size size in bytes of the data block transmitted during the E2PROM reading see tab Factory page 54 For the DMC 2000 Dosimeter the recommended value most efficient is 208 bytes for the DMC 100 the recommended size is 240 Marking timeout time delay during which a reader cannot conduct a second consecutive reading of the same Dosimeter This delay allows the reader to avoid redundant readings when a Dosimeter inadvertently happens to remain within proximity of a hands free reader for an extended period of time m Firmware Version the number that enables the clear identification of the software version internal to the Dosimeter m Low battery autonomy in PAUSE operating time remaining for an inactive Dosimeter once the battery level indicator reads Battery Low m Low battery autonomy in RUN operating time remaining for an active Dosimeter once the battery level indicator reads Ba
63. IMASS Dosimeter software refer to the User s Manuals listed below m DMC 2000 Dosimeter User s Manual m LDM 2000 Reader User s Manual m DMC 100 Dosimeter User s Manual m DMC_User Software User s Manual m Dosiview Software User s Manual DMC_Histo Software User s Manual m LDM 91 Reader User s Manual 128110A 1 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 1 3 1 3 1 1 3 2 1 3 3 m LDM 101 Reader User s Manual m LDM210 LDM220 reader user s manual Conventions Symbols E and LI These symbols are used for the descriptions and details The symbol corresponds to the first level of detail The symbol Q corresponds to the second level of detail For legibility purpose these symbols are aligned vertically Operating System For reasons of convention all references to the Microsoft Windows version 95 98 or NT of the Operating System will only be used if a feature is specific to that operating system Screen Captures In order to facilitate the use of the DOSIMASS Dosimeter software this Manual contains screen captures The majority of screen captures present in this Manual were generated from the
64. IMASS used for dosimeters DOSIMASS LDM Software Module in DOSIMASS used for readers DOSINET Software Module used to manage the exchanges between the DOSIMASS module and a hands free reader DOSIVIEW Software used to manage the configuration and centralized dosimetry system management of users dosimeters and readers DTE Data Terminal Equipment devices uses as a source of data and or collector of data E2PROM Same as an EEPROM 144 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM EEPROM Registration Zone Entry Histogram Infra red LDM101 LDM2000 LDM210 128110A Error Style not defined Electrically Erasable and Programmable Read Only Memory electrically erasable memory used to store configuration and measurement data in the dosimeter A register is an indivisible and dated element that constitutes a historical record A register can be one of the following types indicator of start or end of a histogram used by the cyclic histogram management routine event change of status of a Dosimeter faults alarms assignment change marking by a reader etc dose increment increase of the accumulated dose of more than 0 1 mrem during
65. U Load configuration configuration Restore initial dosimeter Reread dosimeter Read another dosimeter write DM The following parameters are inaccessible m Marking Timeout Total Dose and m The entire array of parameters linked to primary and secondary measurements 5 3 9 Factory a Dosimeter n 189626 DMC20005 Measures Operating 0 Sas Wiser fone Assign Status ee lositrations black loom Factory E PROM Dump summary Stat date 2 Feb z000 Starttime f4 h 47 mn 56 s Start address 1E8 End address BD E2PROM window 208 History period 10s Next addrtoread wO Print Read EERON Read another dosimeter Restore initial dosimeter Reread dosimeter configuration configuration e UN The entire array of parameters in this section is accessible The possibility of reading the E2PROM is also available without restriction 80 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 5 4 DMC 100 DMC 90 DM 9X with LDM 101 This section provides all of the sections contained in the Configuration window wh
66. Windows 95 Operating System environment Minor differences may appear on the screen captures that correspond to other environments Note Unless otherwise specified the screen copies presented in this Manual correspond to the highest level of user access For further information on the management of access levels consult the section entitled Access Levels page 31 Function Selection via Menu In order to increase the readability of this Manual selecting a function from the Menu of an application operating under Windows will be indicated in the following manner From the main menu select Menu_Function Menu_Sub_ Function Supplementary _Function Supplementary Sub Function etc For example ln order to print a document select File Print 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 1 3 4 Terminology This Manual employs a number of terms that are specific to the field of Dosimetry In order to avoid making the Manual overly complex most of these terms are explained in detail in the Glossary which is located at the end of the document 1 3 5 Advisories Reminders and Notes Throughout this Manual the user will find
67. ad Dave 4 gt Text Summary Graph Text Exit history history oe esport 28110A Record of revisions No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying recording or by any information storage or retrieval system without permission in writing from MGP Instruments Inc At the time of this release all information contained in this document is believed to be true and accurate Any and all comments or corrections received by MGP Instruments Inc become the sole property of MGP Instruments Inc MGP Instruments Inc reserves the right to retain the sole ownership of this document and to publish any comments and corrections received without any obligation to the sender Dosimass DM 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Record of revisions Compiled by 16 06 99 JP Huriaux 06 15 2001 14 05 03 J Perez 15 07 03 J Perez 13 11 2003 D Chatron 04 12 03 Origin and description of revision Original MGPI document 16 00140 based upon MGPSA document 117905AA Revised to reflect changes for Dosimass Dosinet Versions Applica
68. additions to the text entitled Advisory Reminder or Note These additions are used for the following Advisory the advice contained in these sections will aid the user in working more efficiently Shortcuts are provided wherever possible as well as time saving tips Reminder the reminders review information already provided elsewhere in the Manual and will help the user avoid redundant searches Note These remarks highlight important points exceptions and specific information 1 4 Software Description The DOSIMASS Dosimeter software DOSIMETER MAINTENANCE AND SET UP SOFTWARE 1S Software specifically adapted to the configuration and operation of the DMC2000 Dosimeter family The DOSIMASS Dosimeter software is delivered with a CD ROM that contains o DOSIMASS DMC and LDM 723 o DOSINET 734 This software is compatible with numerous platforms PC based workstations and Operating Systems Windows 95 98 Windows 2000 Windows XP Windows NT Advanced Server and Workstation 1 4 1 Features The DOSIMASS Dosimeter software offers the following features Individual configuration of the Dosimeters including Readout and display of the actual Dosimeter parameters Modification of the Dosimeter parameters Downloading of the Dosimeter parameters from a file and Saving the Dosimeter parameters into a file MB UOUOUO E Multiple configuration of the Dosimeters in lots 128110A 3 Publication traduction et r
69. aduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 9 1 108 Value of the dose increment corresponding to the position of the cursor Value of the cumulative dose corresponding to the position of the cursor and Date and time of the end of the Events History 3 Histogram Events A portion of the history window reserved for display of the date time stamped historical events corresponding to the black dots in the display area 4 Display Tools A portion of the history window providing Tools enabling zoom and magnification functions enabling the automatic viewing of any part of the graphic Navigation of the Cursor and Pointer The movable blue cursor vertical blue bar navigates using the mouse and the black movable pointer described below along the X Axis Initially it is positioned at the origin directly over the Y Axis The movable black pointer vertical black bar enables the definition of an area to be examined using the magnifying glass similar to defining a Region of Interest see below Dosimeter n 200002 e Soft Dosimass_L exe HIS SAMPLE HIS 10000 0 1000 0 aaa bes ates 100 0 E 4100 2 E i o1 Wevdta
70. al clock by recording the start time from the host computer and using a counter to increment the hours and minutes Note that feature is only supported in DMC 2000 firmware V2 7 and above Remaining time Allows displaying the remaining time before the time alarm or the dose alarm is triggered The display of Remaining time before dose alarm is triggered is a calculated value based on time in area accumulated dose and dose rate measured in real time applicable to firmware versions V2 A or greater Calibrations The section entitled Calibrations provides access to the parameters related to the calibration of the Dosimeter Details are specific to the dosimeter type used All dosimeters are calibrated at the MGPI factory contact MGPI prior to adjustment of any of the below indicated set points 69 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 5 2 6 70 Note These parameters effect the internal operation of the Dosimeter and are determined during an approved calibration process MGP instruments recommends that any modification of these parameters only be performed by certified personnel following specific MGPI training Inappropriate modification
71. ation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Entry Date this field must be provided in order to indicate the start date of the Events History when the Dosimeter is activated from the assignment tab Entry Time this field must be provided in order to indicate the start time of the Events History when the Dosimeter is activated from the assignment tab Identification an alphanumeric field that allows the identification of the wearer of the Dosimeter Assigned Dosimeter if this option is checked the Dosimeter reads ASSIGNED instead of PAUSE when it deactivated when the dosimeter is in run mode the user USER DISPLAY will be displayed in addition to the radiological measurements Assignment date provides information regarding an assignment of the Dosimeter for information purposes Dosimeter in Run Pause this button allows the user to activate deactivate the dosimeter from the assignment tab note the entry date and time indicated above will be recorded in the histogram Note prior to activation of the Dosimeter from the assignment tab the user must remember to input the Entry Date and Entry Time fields Entry Conditions o Unchanged Alarms and Measures this option enables the conservation of the cumulative dose and alarm status of the Do
72. autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 9 2 4 128110A 000 EE O0 E 00 0 00 0 Error Style not defined Battery Status Battery Low or Battery Loss Internal Dosimeter Error Fault Detector or Corrupted Events History or Activated ILS this parameter indicates whether the ILS is activated checkbox checked The ILS is an internal magnetic switch that is activated using an external magnet typically resulting from the dosimeter being accessed through an LDM 101 reader EEPROM Fault E2PROM Fault or Corrupted Internal Calibration or Corrupted External Calibration or Optical Test Fault or External Detector Fault For more information concerning the appropriate action to take specifically regarding internal faults consult the Dosimeter User s Manual Operating Parameters The section entitled Operating Parameters provides access to the operating parameters These parameters enable the adaptation of the operating mode to conform to the specific needs of the user DisslayinPause PAUSE Dosimeter n 206b35 DMC2000S ae Operating Sub l User I le th HEEN Param Calibrations zones block Sister Factory Displayed measures Dose Rate manual pimay only i mav sy A Format floating point report
73. blication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Due to evolutions in standards and equipment the information provided is subject to MGP Instruments MGP Instruments Inc change without notice Please contact us for confirmation BP1 5000 Highlands Parkway Suite 150 F 13113 Lamanon Smyrna Georgia 30082 T l 33 0 4 90 59 59 59 Tel 770 432 2744 Fax 33 0 4 90 59 55 18 Fax 770 432 9179 http www mgpi com 128110A
74. ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 3 4 4 2 3 4 4 3 3 4 4 4 44 m Downloading the Dosimeter parameters from a file and m Saving the Dosimeter parameters to a file Given the high degree of importance attached to this function two chapters are dedicated to this subject Configuration of a Dosimeter page 51 This chapter provides the information required for access to the Configuration window and allows the user to become proficient in the entire array of functions read write of parameters downloading and saving parameter files Dosimeter Parameters page 61 This chapter presents the description of the primary parameters which are accessible while browsing through the different sections contained within the Configuration window This function is accessible from the main menu by selecting Dosimeter Single Configuration Multiple Configurations This function enables the multiple configuration of Dosimeters using the Configuration files A separate chapter is dedicated to the explanation of this function see Multiple Configuration of the Dosimeters page 87 This function is accessible from the main menu by selection Dosimeter Multiple Configurations Events History This functi
75. cel The following information may be entered Assigned Dosimeter this option is checked to confirm the Dosimeter has been assigned Note the dosimeter will read AFFECT instead of PAUSE when it deactivated when the dosimeter is in run mode the user USER DISPLAY will be displayed in addition to the radiological measurements If the dosimeter is already assigned this box will be checked Assignment Date this field is read only and indicates the start date of the Event History if the dosimeter has already been assigned Identification an alphanumeric field that allows the identification of the wearer of the Dosimeter m Task Code a code that enables the connection between a Dosimeter and a task to be accomplished Current Mode this enables the definition of the operating mode of the Dosimeter from among the following o Autonomous autonomous mode Satellite satellite mode O History Period this parameter enables the definition of the specific time including the following parameters 10 seconds 1 minute 10 minutes 1 hour 24 hours OOddao 0 96 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Some
76. ction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 4 7 60 Saving Parameters to a File This function key allows the user to save the entire array of parameters defined in the Configuration window into a configuration file that can be retrieved at a later date This function is accessible from the Configuration window see Access to the Configuration Window page 51 The procedure is as follows cave From the Configuration window click on EA The following window will appear Saye dosimeter to configuration file 2 x nee C Dosimass Save in E Dosimass l c l Save as type dm Cancel m Using the Save As scroll down window select a directory into which the configuration files can be stored Dm is the directory that is proposed by default m Inthe File Name field input the name of the file configuration files with DM extensions m Click on Save The new file includes all of the parameters contained in all of the sections of the Configuration window 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or rep
77. ding mesurements thres amp assignmerr Cancel 100081 reading user area Cancel 100081 reading calibrations Cancel 100081 reading summary amp EZPROM Cancel The Configuration window will automatically appear Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C in the 128110A Dosimass DM Error Style not defined 4 3 Configuration Window After following the procedure outlined in the preceding section the Configuration window will appear as shown below x Dosimeter n 176356 DMC 20005 Measures Operating Sub User eThrash Assign Status ue on catratins zones black ar System Factory 2 Doze alarm Rate alarm Dose warming Time alarm _ Rate warning Primare measurements Internal Hpi1 0 Primary dose 16 6 mem Primary rate 0 00E 0 mrem h Primary dose threshold 1 00E 0 mrem Primary rate threshold 1 00E 0 mrermih Priman dose warning 1 00E 2 mre Priman rate warning 7 008 3 POEN ae Time 57 h 17 mn 39 5 Time threshold 12 h 0 mn Secondary measurements Internal Har 0 Secondary dose 0 0 mem Secondary rate 0 00E 0 mremh Secondary dose threshold 99E 4 mrem Secondary rate threshold 99E 4 mrem g
78. e 0 00E 0 memsh Primary dose threshold 1 00E 0 mrem Primary rate threshold 1 00E 0 mremih Primary dose warning 7 006 2 Kren Primary rate warning 1 00E 3 mremnh Time 57 h 17 mn 39 s Time threshold 12 h 0 mn SOEWeacweetwesteneeneseensetaneremeteaeteSteeSaeeSaeeaeeenereammeneesaeennaeere 0 Ee Sraperapyiedingg Gig Restore initial dosimeter Read another dosimeter Write Dh configuration configuration dosimeter The entire array of measures and parameters relative to the secondary measurements field are inaccessible 9 3 2 Assignment 4 Dosimeter n 236637 DMC2Z0005 Lser Measures a ee a Calibrations sw oes System Factory Operating eThresh Assign Status Farar Task 5c4 Identification OOUOOU000000 Entry date 4 Feb 2004 Dosimeter assigned I TEEEEELELLI Enty time 15 h 16 mn 30 5 sapireneni daig ii O in RUN SFM UU SHEN Get yall Ent diti keep measures amp alarms unchanged Miry COndHONS oreset measures amp clear alarms BS Stat new history E 4 History period 2 h EDF mode M Exercise mode I Load configuration configuration Restore initial dosimeter Reread dosimeter Read another dosimeter Write Dil The Assignment Date field is inaccessible 128110A 77 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de
79. e deactivated the dosimeter indicates the state by displaying the message repos or pause or a specified user message DM DosiMeter abbreviation used in DOSIMASS DM to refer to a dosimeter DM90 Dosimeter model 90 DM9X Dosimeter model 90 and subsequent DM90 DM91 DMC_HISTO Software used to extract and read the histogram data stored in a DMC 100 dosimeter memory 128110A 143 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM DMC_MANAGER Maintenance and configuration software used for the Dosimeters DMC100 DMC90 and DM9X DMC USER Software used to configure common parameters turn ON and OFF and read status of the Dosimeters DMC100 DMC90 and DM9X DMC100 Dosimeter Compact model 100 DMC2000 Dosimeter Compact model 2000 New generation electronic dosimeter very compact and light DMC2000XB Compact dosimeter model 2000XB X Rays and Beta New generation dosimeter that allows the measurement of deep Dose Hp 10 and shallow dose Hp 0 07 DMC90 Dosimeter Compact model 90 DOSIMASS DOSImetry Maintenance And Setup Software software used for maintenance and configuration of Dosimeters and readers DOSIMASS_DM Software Module in DOS
80. e is provided below m From the main menu select Dosimeter Multiple Configurations 4 MGF Instruments DOSIMASS DM 02 Feb 2000 13 30 58 Hand free File Administration Setup Ebene Tools Help D x Single configuration Multiple configurations History Entry Exit The following window will appear Apply configuration file E E 2 x Direct ee CAMGPI Applications DOSIMASS_ DM dm Look in e c E Files of type dm r Cancel Select the configuration file to be applied to the series of Dosimeters and click on Load The following window will appear 128110A 87 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 4 C Program Files DOSIMASS DOSIMASS_ DM idmisamplel1 dm Dosimeters writen dosimeters Humber of OM reag ob Number of OM writen x Eoo H Searching a dosimeter Stop m Position one Dosimeter within close proximity of the reader The Dosimeter has been configured with the initially selected configuration file Its identification serial number appears in the scroll down list entitled Written Dosimeters In the field Number of DM written the numbe
81. e nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Table of Contents Dosimass DM 5 3 DMC 2 OOO Wit EDM 1 OAs cjeess God cc doatcuteniuetniwoogiben E acti aN 76 5 3 1 Measures and Thresholds cccccccscccseccsecceeccueceueceuecauecusecueesseeceeecueeseeeaaes 77 EO ASTONESAS oe eae tect T1 5 3 3 Status 78 594 Operating Faramele S aissi a T a 78 DOs WalOVAUOM Siersceitetenn ea taena ears tal nate ele hice noes tet eat ct eee iacan bel suet hieat bed hated klaus 79 S360 10 O74 e ec ee eee ee ee eee ee 79 997 ISO OC Kasra ainsi cache trea E N megsce ancien 19 390 OVSENI sespndrewessiee et a ee eed ae eee ae ea eed 80 5 3 9 Factory 80 5 4 DMC 100 DMC 90 DM 9X with LDM 101 2 0 0 ccc ceeeceeeeseeeeaeeeseeeeeeeeeeeesseeeeaees 81 941 MeaSUreS GNC Thresholds saien a a a 81 SA2 WASSIGMIMGNIE a a E E eagiensos dyaaeaen aad 82 5 C7 ate OS a a a OT er ee Reyne eee ee emer 82 544 Operating Parameters sic see eve seen tererersisetoteddnrtine e vend eea aE Ei 83 S4 CalipratiNS kencen r aredadeeeascatetceteated 84 DOs GUDOMEN ET 84 SAT SEP BIOCK armaren aA dace a AR 84 SAO SVS imoa R E EE 85 IAD FACIO oe a E E nee essen 86 6 MULTIPLE CONFIGURATION OF THE DOSIMETERS cccscceeeeeeseeeeeeeeeeeeeeeees 87 7 PASSAGE INTO A CONTROLLED AREA RCA ccccccceeeceneeeeeeneeeeeeeseneeeeseneees 89
82. ectly into a configuration file so that they can be retrieved at a later date Write DM This function key allows a user to load into the Dosimeter memory all of the parameters currently defined in the Configuration window Attention if any parameters were modified in sections other than the current section they will also be loaded into the Dosimeter memory Reread dosimeter This function key allows a user to reread the Dosimeter in order to reload the whole set of its parameters in every tab of the configuration window aa are This function key allows the user to reinitialize the eee previously loaded parameters at the time of the last Dosimeter reading or when the last configuration file was loaded All of the modifications made since this last parameter loading will be canceled 128110A 57 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 4 4 4 5 58 Fead another l This function key allows the user to read another dosimeter dosimeter without restating the single configuration feature Exit This function key allows the user to return to the main menu Display of Dosimeter Parameters This function allows a u
83. ed History fault Parameters risible i i E Rate alarm enabled J Warnings enabled Dose in MATTEL IE zeroed ENTE _ co Time alarm lenabled acknowledge Fast entry disabled ee ee a e spre tt ETTE TT Rate Alarm latching Current mode satellite a RE Backlight disabled Alarmi s reported lbyflash dae eee mi 4 Sy a _ Low battery sound alarm always enabled Teletransmission al ff 1800 bauda Tae i ohipiate lever pulse _ triggered externally me oo Speaker enabled 1 p ianlim rE e ARE PEPE SST SER PEE is oft oftime enabled ie tale Save Ean ras fz Reread lt Restore E Raagi ie contgurytor configuration 7 dosimeter initial dosimeter dosimeter gt Paused DM displays this parameter enables the definition of the Dosimeter display when it is in pause mode o PAUSE this message is displayed unless the Dosimeter is Assigned consult this parameter under the Assignment section o User Display the message defined in the User Display field is displayed consult this parameter under the section entitled User Block 67 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defi
84. ed sf g The following window appears 128110A 25 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM User license provided to Name Entreprise Serial 0123466739 DOSIMASS D M Version 723 kK 05 Noy 2003 Copyright 1996 2003 MGF Instruments This window contains information relative to the license granted to the user the number and index number of the software version and the date that the software was published This information can also be found in the main menu of the DOSIMASS Dosimeter software by selecting the following option Help About DOSIMASS DM m Click on OK lf the software has not been registered or the serial number is incorrect the following message is displayed 4 Dosimass DH four Dosinass DM copy has not been registered please register in order to be informed of any upgrade or software change m Click on OK to access the main window The main window of the DOSIMASS Dosimeter software will appear e DOSIMASS DMH 16 06 1999 13 26 20 Hand free File Administration Setup Dosimeter Tools Help m When using the LDM 2000 verify that the reader display panel appears as follows 26 128
85. eeeeceeeeaeeeeeeeeaeeeenes 36 34AN Fle Memi CF Oua a anaes a O gawd aeieinaubunansies 36 3 4 2 Administration Menu 0 c cece ccc ececeececececececeeeeeeeeeeeeeesececeeeseeeeaeaeaesenesenentenseees 37 Sad OCCU OMG arna a a a a nanteantieeauaeserat 42 344 D simeter VICI esdan a o a a a a 43 34 LOOS MENU aaa E T ETSE 45 OO PHEOMeNUnnn aa aa A 46 3 9 Jse ofthe Keyboard eesi R a Heck dseelastelsniededtonsece vient Sicetereatids 48 39 1 ConvenhonS ssia aae e a a e a a a a aeee aE 48 352 SOMWA Mialam nesi a deat cout 49 3 5 3 Selecting a Function from the Main Menu ccccccceccceeeeeeeeeeeeeaeeeeeeeaeeees 49 3 5 4 Navigation within a dialog box OF a WINKOW ccccecceeeceeesecceeeeeeeeeeseeeeeneeees 49 3 5 5 Locating the DOSIMASS Dosimeter Software ccccceeceeeeeeeeteeeeeeeeeenaes 50 CONFIGURATION OF A DOSIMETER 0 cccccecececececececececeeecececeeeeeceeeeeeeeeeeeeeeeeeees 51 4 1 ATR ET CLIC VIO as romae taste te Seen a te aegea a acta alomiet hans anna 51 4 2 Access to the Configuration WiIndow c cccccsccceecceeeceeeeeceeeseeeeseeeseeeeseeeseeesseeeseeesanes 51 4 3 CONTMOUFALOALVV IMG OW sossarna ie to ecaered eie oes macerated et daasoe a 53 AO TaS _eanstpteconssanatesrsnucecen tn iecanepeacti E tanh semen eeons aeatiinttecsamtnes 54 432 NP GVAINe lel ZOMG rare ceaceutnae pocas Ces psr a cecsns A E a 55 ASO FUNCION KOV S ocina a aa a aaa E E 57 4 4 Display of Dosimeter Parameters e
86. els Administration Log out Ctrl D Account management trl F4 Login time _ out For more information on the different access levels see Access Levels page 33 Identification This function enables all users to identify themselves in order to obtain the access level allocated by the Administrator consult the section entitled Account Management on the next page m Using the main menu select Administration Identification The following window will appear 4 Identification E 3 x User id Administrator I SO A OF Cancel m Type in the User Name in the section entitled User ID m Type in the Associated Password in the section entitled Password 37 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Note for security reasons when typing the password entry the alphanumeric characters are replaced by the symbol m Click on OK The main screen will be displayed The access level appears in the left hand side of the title bar If no access level indication appears then the selected access authorization level is set at the default or Operator access level Note in case of identification fault e g
87. en consent Format 112175C Error Style not defined Dosimass DM 2 3 12 2 4 24 Selection of a Serial Port COM1 COM2 COM3 COM4 see the section entitled Selection of another serial port page 123 Note Since all of the parameters required for the configuration of the DOSIMASS Dosimeter and DOSINET software are accessible from the setup menu it is highly recommended that NO manual modifications be made to any files contained in the Installation directories 2 3 11 Access to the DOSIMASS Software Modules Once the installation is complete the DOSIMASS Software modules are accessible as follows m Using the Windows Desktop environment The user simply double clicks the DOSINET icon in order to start the DOSINET module m Directly from the Folder in the Programs File The user selects Start Programs DOSIMASS DOSINET in order to activate the DOSINET module m Using the Windows Explorer tool by direct selection of the executable files that were placed in the installation folders Start up of the DOSIMASS Dosimeter Software Note This section provides the procedure required in order to start up the DOSIMASS Dosimeter software once the installation is complete Note Before initiating the DOSIMASS Dosimeter software start up the user must verify that the hardware has been correctly installed including m Ensure that the connection cord between the PC and the Dosimeter reader is correctly installed
88. en the DMC 100 DMC 90 DM 9X Dosimeters are used with an LDM 101 reader operating in infra red mode All of the differences relative to the standard configuration DMC 2000 with LDM 2000 are identified in the following sections 5 4 1 Measures and Thresholds 4 Dosimeter n 135592 DMC100 Measures Operating Liser aa Assign Status E stations block System Factory Dose alarm Rate alarm Dosewarning Time alarm g Rate warning _ 3 Primary measurements Internal Hpi 0 Primary dose 0 0 mem Primary rate 0 00E 0 memsh Primary dose threshold 2 00E 3 mrem Primary rate threshold 2 00E 3 mremh Primary dose warning 7 006 3 FFE Priman rate warning 1 00E 3 Haren Time wn 3 mn 12 s Time threshold 2 h 0 mn Read another dosimeter Restore initial dosimeter Load configuration configuration Reread dosimeter Write DM The entire array of measures and parameters relative to the secondary measurements field are inaccessible 128110A 81 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 4 2 9 4 3 82 Assignment Ye Dosimeter n 100135 DHMC100 x Measures Operating ser m
89. eproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 1 4 2 1 4 3 m Simplified Controlled Area entrance exit functions Troubleshooting Diagnostics and Dosimeter Repair Readout of Dosimeter event history Compatibility with previous generation products The dosimetry DOSIMASS software is compatible with the following previous generation products Dosimeter models DMC100 DMC90 DM9X m Dosimeter reader models LDM101 LDM91 Additionally it provides all the functionalities of previous generation programs see below Compatibility with DMC_MANAGER DMC_USER and DMC_ HISTO Software The features of the previous generation software are supported by the current version of the DOSIMASS Dosimeter Software DMC_MANAGER Features Corresponding Features of the DOSIMASS Dosimeter Software Dosimeter parameter changing or loading Individual configuration of a Dosimeter Dosimeter Menu Single Configuration Operation display of the Events History Events History Operation Feature Dosimeter Menu Events History Initialization of a Dosimeter from a Individual Configuration of a Dosimeter POMMANAINE Dosimeter Menu Single Configuration Modification of the Dosimeter calibration Indi
90. er Dosimeter Parameters Events History Period page 65 Dose Increment A dose increment is the increase in the dose equivalent during an interval of time defined by the Events History Period Each dose increment is date time stamped Their use provides information regarding the evolution of radiation doses received by a specific user 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 9 3 Access to the Events History Function The following procedure indicates the manner in which the Events History function can be accessed When using a Dosimeter with a hand free reader m Position the Dosimeter within close proximity of the reader When using a Dosimeter with an LDM 101 m Insert the Dosimeter into the LDM 101 mE From the main menu select Dosimeter History 4 MGP Instruments DOSIMASS DM 02 Feb 2000 13 53 49 Infra Red File Administration Setup eke Tools Help 1O x Single configuration Multiple configurations Entry Exit The following window will briefly appear 100081 reading summary amp E2PROM Cancel Then the Events History window will appear 9 4 Events History
91. er parameters to a file 4 2 Access to the Configuration Window The procedure is as follows m Access the main screen of the DOSIMASS Dosimeter software by following the procedure detailed in the section entitled Start up of the DOSIMASS Dosimeter Software page 24 mE From the main menu select Dosimeter Single configuration DOSIMASS DHM 14 Jun 2002 08 52 13 Hand free File Administration Setup BERR Tools Help Single configuration Multiple contiguratiors History Entry Enit T Aseignmertt 128110A 51 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 52 One of the following windows will appear When using a Dosimeter with an LDM 2000 210 or 220 reader Searching a dosimeter Cancel Dosimass DM m Move the Dosimeter to within close range of the LDM 2000 immediate proximity When using a Dosimeter with an LDM 101 reader Insert a dosimeter cancel m Insert the Dosimeter into the LDM 101 The following windows will appear sequentially These windows indicate the number of the Dosimeter being read and the type of parameter in the process of being read EEPROM memory of the Dosimeter 100081 rea
92. erdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM m The date and time of the start of the Events History m The list of all of the events and potential dose increments date and time stamped m A graphic representation of the Events History See an example in appendix 13 3 9 11 Exporting a history file The data contained in the historical file can be exported to be analyzed or archived Text To do this select the function F in the historic window a Dosimeter n 1896276 DMC20005 imo imo 100 mrem mrem Mt 0 1 00 Dose incem cumulated dose Rate Dose diff between cursors Start 02 Feb 2000 14 49 19 02 Feb 2000 14 49 30 Feb 2000 14 49 30 Dz Feb 2000 14 40 20 04 ial E s 3 60E 1 e hz Feb 2000 14 49 59 Wed Of Feb fond dosimeter deactivation PAUSE Wed Of Feb 2000 mee e Tate warning ends Pe a ea Test eee Reg oe ad Ec ar RT idl Gd EM OR CYS no ne EE i a pled Oe Feb 2000 Deore oO meee al arn Ena E t Dose increments Wed Of Feb 000 14 49 04 dose alarm Accumulated dase Wed Of Feb 000 14 46 56 dose warning Wed Of Feb 2000 14 45 45 rate warning E al E Load Save 4 p rA Text Summary Graph Text Exit history history Ba export 4 Excel Exportat format E Standard
93. ernal detector that is linked to the Dosimeter O Measurement Type Hp 10 or Hp 0 07 Primary Dose The dose that the Dosimeter accumulated during the last entry into the controlled area for the primary measurement Primary Dose Threshold The dose alarm threshold for the primary measurement Primary Dose Warning The dose alert threshold for the primary measurement Time The duration of the last entry into the controlled area Primary Rate The maximum dose rate detected by the Dosimeter during the last entry into the controlled area for the primary measurement Primary Rate Threshold The alarm threshold of the dose rate for the primary measurement Primary Rate Warning The dose rate alert threshold for the primary measurement Time Threshold The duration alarm threshold 128110A 63 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 2 2 64 Secondary Measurements this non modifiable field provides the same type of information as the Primary Measurement however applicable to the Secondary Measurements if available see above Secondary Dose The dose that the Dosimeter accumulated during the last entry into the contr
94. es will now begin Status windows will appear providing a progress report on the downloading of the files to the PC disk Installing Dosinass DM ch dosimassdosimass_ dmanguecontdosimass_ ens lwl Ss 1684 2 3 10 Completing the Installation Procedure In order to complete the installation procedure the Readme doc file must be closed If this file is left open no further operations can be performed m From the main Menu of the Readme doc application select File Exit Note if the Readme doc application is no longer visible on the screen then follow the instructions below in order to make it reappear Press the Alt key on the keyboard and keep it pressed down and Press several times on the Tab key in order to view the different application windows that function under Windows As soon as the icon that corresponds to the Readme doc application appears release the Alt and Tab keys immediately 22 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Once the Readme doc file is closed the following window will appear setup Complete setup has finished copying files to your computer Before you can use the program you must r
95. estart Windows or your computer C No Iwill restart my computer later Remove any disks from their drives and then click Finish to complete setup In order to fully complete the installation procedure the PC must be rebooted Nevertheless if other applications must be installed for example the TCP IP Protocol rebooting the PC can be performed once all of the other installation procedures are complete In order to reboot the computer m Click on Yes In order to delay rebooting the computer m Click on No 2 3 11 Installation Complete After rebooting the PC the installation of the DOSIMASS Dosimeter Software is complete Generally all of the parameters required for the operation of the DOSIMASS Dosimeter and DOSINET Software are automatically configured during the software installation procedure configuration of the link between the PC and the reader If the constraints relative to the reader address and the choice of serial port were not respected then the following parameters must still be modified Consult the procedures listed below Address of the Dosimeter reader see the section entitled Hardware Installation page 8 128110A 23 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our writt
96. et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined The Dosimeter is now inactive m Remove the Dosimeter from direct proximity with the LDM 2000 or extract the Dosimeter from the LDM 101 m Repeat this procedure with a new Dosimeter or click on Cancel to exit from the function 128110A 93 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Blank page 94 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 8 Assignment Menu Option This chapter details the process provided for assigning dosimeters to personnel Dosimeter assignment is desirable when dosimeters are provided to individuals on a permanent sem
97. etermination of the sub zone in which the Dosimeter is now located The increase in dose and the duration of the entry into this sub zone are recorded directly into the Dosimeter Note A sub zone entry is determined by two distinct detections of a DMC 2000 by the same LDM 2000 or by two readers with identical marker zone addresses For each sub zone these values are accumulated in the fields associated to each sub zone m Dose SZ1 to Dose SZ10 for the dose and m Duration SZ1 to Duration SZ10 for the duration In the case where for an undetermined reason certain stampings were not executed the visit into certain sub zones cannot be determined In this case the cumulative dose and duration data that correspond to these undetermined sub zones are stored into the Dose SZ and Duration SZ fields User Block The section entitled User Block allows the customization of the Dosimeter display at rest and the pre definition of messages which could be displayed successively one by one during a passage in front of a reader a Dosimeter n 535024 SOR T X Measures Operating Sub ser E Assign Status ER aration zones block System Factory Flash measures _ _ Ink condition High 068502CC0496 Ambiant 06790200495 Low QOOU0O000000 high OF AbO494 Username ABC User defined 8A8scrr4reEs205 User display AAC Gamma Neutron i _ assignement Gamma 10 Fading 85535 mn Neutron
98. function allows the user to manage the users and their associated access authorization levels 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 3 2 3 1 Default Value of the Access Parameters m User Name administrator m Associated Password administrator 3 2 4 Manufacturer Factory Level The Manufacturer level of authorization has access to the entire array of the DOSIMASS Dosimeter software functions excluding the Account Management function in the Administration menu 3 2 4 1 Default Value of the Access Parameters m User Name mgpi m Associated Password mgpi Safety Alert The Factory Manufacturer level of authorization provides access to the Manufacturing parameters of the Dosimeter more specifically the calibration parameters Only MGPI experts are permitted to modify these parameters and then only under controlled circumstances since this could cause a malfunction in the operation of the Dosimeters A The User levels and functions may be summarized as follows 3 3 Main Screen Note The main screen of the DOSIMASS Dosimeter software is primarily accessible by activating the corresponding icon DOSIM
99. g recordings comprises the Current Events History 128110A 99 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 2 3 9 2 4 9 2 5 9 2 6 9 2 7 100 Closure of an Events History The closure of an Events History is conducted at the next activation of the Dosimeter if the Start New Events History option is validated This option is defined under Start new events history in the section entitled Assignment Number of Events History Several Historical Events can be recorded successively in the Dosimeter memory As soon as the totality of the corresponding memory is used the Current Event replaces the oldest Event Note it is advisable to save the Events History on a regular basis into files which can be subsequently used Events History Saturation If an Events History takes up all of the memory it cannot be recovered When the Events History is saturated the most recent records replace the oldest elements Events History Period The Events History Period is the constant interval of time at the end of which the increase in dose equivalent and the events are recorded This interval can be one of several values Note See chapt
100. hapter presents the entire array of information that enables the user to ensure optimal operation of the Events History feature The Events History data is stored in the Dosimeter and saved in History files Note m The use of the Events History feature for the DM 90 and DM 9X Dosimeters is not possible using the DOSIMASS Dosimeter Software m This function is the only function of DOSIMASS DM that is accessible without the use of a dosimeter It allows exploring the historical files previously stored 9 2 Important Definitions 9 2 1 Events History An Events History is a series of chronological elements that are time and date stamped and stored in a Dosimeter These elements are either dose increments or specific events status change of a Dosimeter such as the appearance of faults alarms assignment changes marking occurrences etc The maximum number of record able elements depends upon the Dosimeter type Note The start up of an Events History generally takes place at the time of the activation of the Dosimeter see the option entitled Start new events history page 82 under the section entitled Assignment 9 2 2 Current Events History Once an Events History has been initiated all events that arise from that moment are time date stamped and recorded into the Dosimeter In addition at regular intervals Events History Periods the value of the potential increase of the dose equivalent is recorded The entire set of correspondin
101. he Network icon Note if the Network function is unavailable it must be installed using the Add Remove Program icon see Installation of the Windows communication module page 129 The following window will appear Network El Ei Configuration Identification Access Control 0 O The following network components are installed m Client for Microsoft Networks Com EtherLink ll PEMCIA SC5S98 SC569C Dial Up Adapter Dial Up Adapter 2 WPN Support Microsoft Virtual Private Networking Adapter a i Hemose Properes Primary Network Logon a Chent for Microsoft Networks File and Frint Sharing r Description OF Cancel Dosimass DM The user must verify in the upper field that the following components are installed in the Network window shown above Dial up Adapter and TCP IP If at least one of these two components is not installed click on Add The following selection window will appear Select Network Component Type El x Click the type of network component you want to install aa A network adapter it a hardware device that physically connects your computer to a network 126 In order to add a Dial Up Adapter select Adapter then click on Add 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduct
102. i permanent basis or designated for the use of specific personnel teams or tasks 8 1 Assignment of a Dosimeter using an LDM 2000 LDM210 or LDM220 recommended Assignment of dosimeters through the menu option is a semi automatic process where the operator is prompted for dosimeters enters the applicable assignment data and writes the data to the dosimeter Dosimeters may also be assigned through the single configuration option menu detailed on 5 2 2 5 3 2 and 5 4 2 Single configuration Multiple configurations History Entry Exit 4ssignment When assignment is selected the user is prompted to insert a dosimeter Insert a dosimeter Cancel 128110A 95 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM The assignment data is entered as follows Assignment of a DMC 2000 with an LDM 2000 or LDM 210 220 a Assignment E ioj x DM assigned M User display Identification Task optional parameters Current made satellite Waring of your dosimeter iz used bi a centralized system some dosimeter parameters may be overwritten by the History period 7 10 mn system Contact MGPI for guidance Can
103. imeter Reread dosimeter configuration configuration ual 128110A 15 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 5 3 76 Dosimass DM Summary this section regroups the entire array of information non modifiable relative to the most recent Events History and a field that allows the user to select the address from the beginning of the E2PROM readout O Start Date of the most recent Events History O Start Time of the most recent Events History o Start Address start address in hexadecimals of the EZPROM memory where the most recent Events History is stored o End Address end address in hexadecimals of the EZPROM memory where the most recent Events History is stored o E2PROM Window the size in bytes of the data block that was transmitted during E2PROM readout This value is programmable in the E2PROM Window Size field of the System section page 72 O Events History Period the most recent Events History period See chapter Dosimeter Parameters Assignment p 61 parameter adjustable histogram period O Next Address to Read address in hexadecimals of the start of the EZ2PROM readout By default this address is po
104. ion FAUSE rate rate dose dose rate Eate rate rate primary dose amp tine preset ends dosimeter activation RUN primary dose time preset O 1 mrem warning ends alarm ends 0 3 mrem 0 4 mrem 0 1 mrem alarm warning 0 2 mrem warning alarn warning ends warning asslqnenent Load Save 4 gt Text history history Print export An summary Graph Text E This window places in text form all the historical events read They are sorted in reversed chronological order the most recent event is displayed on top of the list 128110A 105 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 9 8 Summary Display In order to display the summary of the Events History click on in the Events History window The corresponding information is displayed in the Events History window 4 Dosimeter n 189628 DMC20005 eS x SUMMAN Measurements Stat date z Feb 2000 Primary dose Eo mrem Starttime 14h 7 mn 56 s Primary rate 1 52E 2 mremh Start address 1E8 End address 24E Time Doh B mn 10s E2PROM window 416 History period h Os Nb of elapsed inte
105. ion either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined B Megahertz TFE Microsoft The following window will appear Select Network adapters E yau have an installation disk for this device click Have Disk Manufacturers Network Adapters SEF Dial Up Adapter AA Microsatt Virtual Private Networking Adapter if Microdyne In the Manufacturers window select Microsoft In the Network Adapters window select Dial Up Adapter m Click on OK Protocol iz a language a computer uses Computers must use the same protocol to communicate le the nene ea herein vee tau Pendens saa che melee le Fo Have Disk r The previous window will reappear for several seconds in order to enable the selection of the protocol reviewed below Beyond that the Network window will reappear and the user can simply click on Add once again Select Network Component Type El x Click the tupe of network component you want to install In order to add the TCP IP protocol select Protocol and then click on Add 128110A 127 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112
106. ions are accessible at the Operator level with the following restrictions m certain fields are not displayed most of the displayed information cannot be modified Note The operator has access to the following parameters of the dosimeters m Measurements and Thresholds dose and rate settings only m Assignment Operating parameters Refer to chapter Dosimeter Parameters page 61 Default Value of the Access Parameters User Name operator Associated Password operator Note if the system detects no action from the user using either the keyboard or the mouse for more than the configured number of seconds then the DOSIMASS Dosimeter software automatically reverts to this default access level Supervisor Level The entire array of functions of the DOSIMASS Dosimeter software excluding the Account Management function in the Administration menu is accessible at the Supervisor level with the following restrictions m Only the modification of the information relative to the internal operation parameters factory settings of the Dosimeter is restricted Default Value of the Access Parameters m User Name supervisor m Associated Password supervisor Administrator Level This level provides access to all the functions excluding the Configuration and Dosimeter menu functions This is the only level that is authorized to access the Account Management function from the Administration menu This
107. ist of all events and dose increments and A graphic representation of the Events History will also be printed if selected by the user See Printing an Events History 9 10 Summary This function key allows the user to display the summary of the display Events History See summary display 9 8 Graph This function key allows the user to display the Events History in graphic form in order to analyze it in greater detail see Historic Display in Graphic Format 9 9 This function key allows the user to display the Events History in the form of a text which lists the events see Display of Historical Events 9 7 Exit This function key allows the user to return to the main menu 9 6 Reading an Events History 9 6 1 From a Dosimeter m Access the Events History window by following the procedure elaborated in the section entitled Access to Events History m Click on A The event contained in the Events History will appear in the Events History window see Display of Historical Events 9 7 9 6 2 From a File From the main menu select Dosimeter History O x w MGP Instruments DOSIMASS DM 02 Feb 2000 13 53 49 Infra Red Fie Administration Setup Qeleiiteaeme Tools Help Single configuration Multiple configurations Entry Exit If no dosimeter is in the presence of the LDM 2000 or inserted into the LDM 101 reader the following window will appear 128110A 103 Publica
108. le alarm continuaus Teletransmissian asynchronous triggered externally Restore initial dosimeter ave aby Pee Reread heg i Read another Higuration configuration gt i dosimeter dosimeter For the DMC 100 the following parameters are unavailable m The Secondary Measurements display option Mode Civil or Military m Buzzer For the DMC 90 DM 9X the following parameters are unavailable m The Secondary Measurements display option Mode Civil or Military 83 Error Style not defined Dosimass DM E Buzzer m Backlighting m Alarm Flash 5 4 5 Calibrations 4 Dosimeter n 135589 DMC100 a xj Wiser block sistem Factory Dead Time E Eff Hpii0 2 86E Measures Operating eer eae Assign Status Ba Calibrations Internal Detector Minimum Bkg 310782 s Restore initial dosimeter Load configuration configuration Reread dosimeter Read another dosimeter Write DM Only three calibration fields are accessible 5 4 6 Sub Zones This section is inaccessible 5 4 7 User Block 4 Dosimeter n 135569 DMC100 Measures operating User eae Assign Status E stations block System Factory TN P User defined OOOOOOOOOOOOOOOOooOoOoooooo0 Load configuration configuration Restore initial dosimeter Reread dosimeter Read a
109. les of the software using the keyboard 3 2 Access Levels Access to certain features is only permitted if the user possesses the required access level authorization Selection of an access level can be carried out by providing the following information m the user name and m the associated password The parameter default values for each access level are reviewed below Note Refer to section Administration Menu page 37 for adding deleting or modifying users passwords and access level authority Users are strongly encouraged to establish new passwords to prevent unauthorized access to dosimeter parameters While using the DOSIMASS Dosimeter software the current access level appears between brackets in the title bar of the main menu except for that of the lowest access level 3 2 1 Operator Level Note The Operator level is the default access level at the start up of the DOSIMASS Dosimeters software 128110A 33 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 3 2 1 1 3 2 2 3 2 2 1 3 2 3 34 Other than the Log Out and Account Management functions in the Administration menu the entire array of DOSIMASS Dosimeter software funct
110. lles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 9 9 3 Visualization of Historical Events An area containing black and blue squares can be found under the X Axis These symbols represent the events stored in the Events History m In order to identify an event place the pointer of the mouse on the square and Click The corresponding event is automatically highlighted in the display zone of historical events see below ia LQ M M MM IMMM Jan 1998 15 12 50 22 Jan 1998 15 13 16 Thu 22 Jan 1998 15 13 16 marked by 12 0193 Thu 22 Jan 1996 14 56 40 dose warning In the example shown above the cursor points to the event that happened at 3 13 p m and the corresponding event is highlighted in the display zone 9 10 Printing an Events History In order to print the Events History that is currently displayed click on Tit from the Events History window Printing a Text The following information will be printed upon selection m The Dosimeter number and the name of the Events History file when reading from an Events History file m The Events History Period 128110A 111 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement int
111. manufacturing of the Dosimeter and allows manufacturing after sales service It is also engraved directly onto the Dosimeter casing Note Note the Dosimeter numbers are assigned in number series depending upon the type of Dosimeter DM9x 006001 007040 800000 985089 900760 954567 940500 950584 DMC90 801501 852171 920500 921044 DMC100 100001 149999 DMC 2000 150001 299999 For the DMC100 the following information is unavailable m Marking Timeout m Total Dose m Storage and The entire array of parameters linked to primary and secondary measurements For the DMC 90 and DM 9X the following information is unavailable m Marking Timeout 128110A 85 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 9 4 9 86 Total Dose E Storage m Software Version m Unloaded Battery Level m Loaded Battery Level m Storage and Dosimass DM The entire array of parameters linked to primary and secondary measurements Note the following parameters have a different designation for the DMC 100 DMC 90 and DM 9x m N MAX consult MGP Instruments m MINT consult MGP Instruments m CNM INT consult MGP Instru
112. ments m CNM MAX consult MGP Instruments m NATLIM consult MGP Instruments m NMLIN consult MGP Instruments Factory 4 Dosimeter n 135589 DMC100 a x Measures Operating Wiser oon Assign Status cS stations block sistem Factory E PROM Dump summary Stat date 25 Jan 2001 Starttime 10 h W7 mn 4 s Start address 34t End address 4A E2PROM window 240 History period mn Next addr to read wO Print Read EFRON Fead another dosimeter Restore initial dosimeter Reread dosimeter configuration configuration TE EMM For the DMC 100 m The entire array of parameters in this section is accessible m The possibility of reading the E2PROM is also available without restriction For the DMC 90 and DM 9X this section is not available 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 6 Multiple Configuration of the Dosimeters This chapter provides a detailed view of the procedure that enables fast configuration of several Dosimeters using the hands free reader Note this function is authorized for all levels except the administrator The procedur
113. mpatible m hard drive capacity gt 4Gbytes m Working memory RAM gt 128 Mega bytes m 1 available serial communication port configured for use with Microsoft Windows 95 98 ME NT 2000 or XP SVGA display 800 x 600 resolution m TCP IP protocol for Windows m Laser jet type printer m PC compatible mouse or pointing device m a Software pprogram CD ROM MCP Instruments Part Number 116949 contains the following software modules o DOSIMASS DMC and LDM Number 723 O DOSINET Number 734 To operate the software is issued and requires a protection key to be installed in the parallel port of the PC 128110A 7 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 2 2 2 2 1 Verify the address of the plugs which is indicated by the coding wheels The value must be set at 1 2 2 1 1 2 2 1 2 Hardware Installation The hardware installation consists of physically connecting the PC to the Dosimeter reader and then configuring and establishing the link between the two entities The following paragraphs will review the procedures relative to the installation of an LDM 2000 and an LDM 101 Hardware Configuration with an LDM 2000 RS23
114. mple ATTENTION even when using a LOM220 USB reader a seral port must be chosen 3 or 4 generaly Com port ii Back Cancel 20 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined After the user validates their choice the following window will appear F IF your computer does not have a network card you will need to install Microsoft Dial lt gt Up Adapter with TEPIIF Protocol IF you already have a network card installed select No IF you need to install the dial up adapter select Yes to launch the Network Configuration Program 2 3 9 Installing the TCP IP Protocol during the Installation of the DOSIMASS Dosimeter Software The preceding window allows the user to install the TCP IP Protocol The link between the PC and the Dosimeter reader uses this protocol managed transparently by the DOSINET module If the PC is equipped with a LAN Network card this protocol is already installed To install the TCP IP Protocol at this point m Click on Yes For this option follow the procedure that is provided in the Appendix 1 Customized Software Configurations in the Section entitled Installation of the TCP IP Prot
115. n Bead zzPRon The contents of the E2PROM will appear in hexadecimals in the left hand portion of the Factory tab Print Alternatively you may click on to print the E2PROM contents 128110A 113 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM a Dosimeter n 189626 DMC20005 Measures Operating ADA o RATATAT IEF En Assign Status cee lessons zga a yore Factory E 2PROM Dump summary 00FDOIF0 F6SDSB00 O1590400FD01F076 Start date 2 Feb 2000 8D860001590400FD 40F001002FF05859 Starttime 14h 47 mn 66 s Start address 1E8 End address 4E E2PROM windoy 46 History period hos Mext addr to reag 16 Print Read EERON Read another dosimeter Restore initial dosimeter Reread dosimeter configuration configuration TE Ih 114 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style
116. n Time Out Ctrl t The software uses a time out function for security purposes If a user is logged in for longer than a set time the system will log them off This time out value is configurable by the Administrator After logging in under the Administrator account the log in time out option is available 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined h Identification eS xi User id Password I eas UF Cancel Select the Login time out Administrator DOSIMASS DM 01 Feb 2001 15 02 39 Infra Red iol x ite en File FER eup Dosimeter Tools Help Login Log aut Ctrl D Account management Ctrl F4 Login tine _ouk The time out delay can be set up to 9999 seconds The change will take effect after you restart Dosimass y Session time_out delay configuration E O x Warning for thie change to take ettect you must close and restart Dosimass Tire out 1800 z Cancel 128110A 41 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation
117. n the identification sticker of the Dosimeter Note the Dosimeter numbers are assigned in a series of numbers that are dependent upon the type of Dosimeter Total Dose total radiation dose measured by the Dosimeter since its first initialization TID To Clear allows the total dose indication to be reset to zero this option allows the implementation of this reset to zero during a detector change To Keep no reset to zero of the total dose HF Disable Permits the disabling of the hands free circuit applicable to firmware versions 2 7 or greater Note once disabled this can only be reset by using an LDM 91 101 infra red reader 74 Store DM Allows the dosimeter to be placed in a state of maximum power conservation for extended shelf life When enabled the dosimeter will present a blank display in Pause and the hands free circuit is disabled The dosimeter may be turned on by passing a magnet over the ILS switch Note this feature is only operable through an infra red reader Calib Mode This is an MGP factory parameter for use in calibration allows access to the number of pulses instead of the dose In run the Dosimeter will toggle between displayed dose or rate and the word CALIB to indicate this mode is active applicable to firmware versions 2 7 or greater Low Rate Algo Low rate algo allow the dose rate display in uSv h 0 1 mrem h typically for environmental monitoring purposes To obtain the counting accuracy
118. n the Dosimeter display when it is deactivated as long as the corresponding option has been selected When assigned the User Display information is also presented on the display in the run mode and is accessed by pushing the function button m Segment Zones by simply clicking on each of the segments this field allows the selection of the display segments to be shown at the same time as the message recorded in the User Display field User display re Sv in Example 1 several segments are selected User display A re Sv in ml rem ti 2nd a Dose Alarm 1 Ratel Alarm cGy sh Ext Example 2 all of the segments are selected System The section entitled System provides access to the information relative to the internal operating mode of the Dosimeter 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 1 Dosmeter wf fifi DMC2Z0005 Measures Operating User po Assign Status Em lositraions Su zones nila System Factory EYPROM reading window 208 bytes Optical test enabled Marking timeout Detector Saturation qoswh o Firmware version Bo Model MTEU2D Low battery autonomy in PAUSE F2 i OSs TIT
119. n totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 2 3 9 Registration of the Serial Number This operation is necessary for the software to operate The following fields MUST be filled m Name user name Company name of the company m Serial N serial number provided with the software CD ROM and the key This number is mandatory before the software can function o Fill all the fields mentioned in the user license must respect upper and lower case characters o After entering all the information in the required fields click on Continue Note If there is no user license any serial number can be used i e 012345 Dosimass_DM will work normally but it will display the following message on start up a Dosimass_ DH Tour Dosimats_DM copy has not been registered please register in order to be informed of any upgrade or software change The following window will appear 128110A Select Program Folder x Setup will add program icons to the Program Folder listed below You may type a new folder name or select one from the existing Folders list Click Metto continue Frogram Folders Adobe Acrobat D marrage Doc To Help EPSON Scanner
120. ned Dosimass DM 0 E History Fault Reported in Pause when the Dosimeter is deactivated all of the faults relative to the Events History are indicated on its display Not Reported in this case faults are not shown Parameters Visible in Pause when the Dosimeter is deactivated pressing the Selection button enables the visualization of the parameters on its display Invisible the Dosimeter s parameters are not visible from the display Dose in Autonomous a feature that is only valid for a Dosimeter used in autonomous mode Added up when the Dosimeter is activated the value of the previous dose measurement is retained Reset to Zero when the Dosimeter is activated the value of the dose measurement is reset to zero Fast Entry Disabled normal activation mode Enabled Emergency Activation or Fast Entry Mode This option enables the deferred activation of the Dosimeter This is done in order to activate it at a future time in case of an emergency simply by pushing on the selection button When this option is selected Dosimeter displays Enter message on the display Current Mode this enables the definition of the operating mode of the Dosimeter from among the following Autonomous autonomous mode Satellite satellite mode Mode Civil enables the PAUSE display when the Dosimeter is deactivated Military enables the REST display instead of PAUSE when the Dosimeter is deactivated Also disables display and s
121. nother dosimeter Write DOM The following parameters are inaccessible 84 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined m Messages 1 4 m Fading and m All the parameters relative to the Flash Measures 5 4 8 System 4 Dosimeter n 135589 DMC100 xj Measures Operating Liser m Assign Status cee stations block System Factory EPROM reading window 2240 bytes Optical test disabled Detector Saturation 5 100 remih 1 Sw Firmware version ha Low battery autonomy in PAUSE r2 A eae wisssea Low battery autonomy in RUM a Low level external 214 High level external Mma S10 CNM MAX 29 MINT NATLIM CNM INT NMLIN Read another dosimeter Load configuration configuration Restore initial dosimeter Reread dosimeter Write Dil Exit m E2PROM Window Size the size in bytes of the data block transmitted at the time of the E2PROM readout see the section entitled Factory pages 75 80 and 86 For the DMC 100 the recommended value is 240 bytes m Dosimeter hardware identification number of the Dosimeter serial number This number is allocated at the time of the
122. ocol In order to terminate the installation and install the TCP IP Protocol at another date m Click on No In this case a Readme doc file will open automatically in the web browser e g internet explorer This file contains supplementary information that is accessible directly from the PC It can be found in the installation directory that was previously selected This Readme doc file can be printed from the open file using the File Print option via the main Menu 128110A 21 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM C Program Files WWOSIMASS_DMiHelp readme htm Microsoft Internet Explorer Seles Fichier Edition Affichage Favoris utils 7 ae y a x a A Ta Rechercher Se Favoris GA media 4 e Adresse C Program FilesiDOSIMASS_DMiHelpireadme htr ka OK Liens Ea a amp j 3 Witten Ii WO b NIL INSTRUMENT End of the installation of Dosimass For further information please contact our Customer Service department at 33 0 4 90 59 59 59 Or visit our site http www mepi com Congratulations You have just finished installing the Dosimass DM Package 2 Termine a Poste de travail The installation of fil
123. oduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined m Input the actual physical address of the Dosimeter reader into the field entitled Plug Number Reader Address m Click on OK in order to validate the input value 3 4 3 2 General Parameters This function allows the user to select the radiological units used in all the screens of the DOSIMASS Dosimeter software and Events History printing m From the main menu select Configuration General Parameters The following window will appear x General parameters Display unit mrem Select the measurement display units from among the following mrem or mSv or cGy E UUUT E Validate the selection by clicking on OK 3 4 4 Dosimeter Menu This menu provides access to the primary functions of the DOSIMASS Dosimeter Software 4 DOSIMASS DM 14 Jun 2002 08 52 13 Hand free File Administration Setup MibAwsGg Tools Help Single configuration Multiple contigurations History Ent Exit TET 3 4 4 1 Single Configuration This function enables the individual configuration of each Dosimeter This process can be broken down into several basic functions m Readout and Display of the entire parameter array of a Dosimeter Modification of the Dosimeter parameters 128110A 43 Publication traduction et reproduction totales ou partielles de
124. oduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 140 14 14 14 preset ends l4 activation CRUNJ time preset cleared Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 39 41 39 31 94215 ape pe es Dosimass DM mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr em mr am mr em mr em mr am mr am mr em mr am mr am mr am mr em mr em mr em mr em mr em mr em mr em mr em a a a ee ee onn i an an o an n i an ann n dose warning mr em mr em mr em mr am mr em mr em an M E m e e He M He D O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O ESE m FJ Go he E Pr 29 1 mrem 2 1 mrem primary dose amp time SAT mode exit has ended dosimeter primary dose amp power loss 128110A Dosimass DM Error Style not defined
125. olled area for the secondary measurement Secondary Dose Threshold The dose alarm threshold for the secondary measurement Secondary Dose Warning The dose alert threshold for the secondary measurement Secondary Rate The maximum dose rate detected by the Dosimeter during the last entry into the controlled area for the secondary measurement Secondary Rate Threshold The alarm threshold of the dose rate for the secondary measurement Secondary Rate Warning The dose rate alert threshold for the secondary measurement Assignment The Assignment section provides the parameters relative to the activation of a Dosimeter and its assignment to an individual See also section Assignment Menu Option page 95 4 Dosimeter n 23683 7 DMC2Z0005 Measures Operating ser ae Assign Status Ez lcaibraions SH zones aleve sistem Factory Task 32710 Identification 236837 000000000 Entry date 4 Feb 2004 Dosimeter assigned M Entry time fs h 16 mn Bo s Assignment date 2 Oct 2002 E Exercise mode E History period 24h EDF mode M Restore initial dosimeter ited Save ee er eiead don i configuration dosimeter Fead another dosimeter Task Code a code that enables the identification between a Dosimeter and a task to be accomplished 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autoris
126. olled zone After the exit from zone the dosimeter is inactive and can no longer be marked Sub zone Abbreviation for a controlled sub zone 146 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Controlled Sub zone Must be located inside a controlled zone The controlled sub zone can be one or several designated zones inside the controlled zone Certain dosimeter parameters thresholds task code etc can be modified in the sub zone entry window Controlled Zone A closed perimeter where all individuals entering and required to wear an active dosimeter Permission to enter into this Zone depends among other things on certain dosimetry criteria Geographical Zone Spatial subdivision used for the marking of dosimeters A building or location can be subdivided into several geographical areas where LDM 2000 readers configured for marking mode are installed to identify them and track the movement and dose accumulated by the dosimeters as they move from one zone to another 128110A 147 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The pu
127. on Exit when the Account Management session is terminated or continue on to another task Modify an Existing User This function allows the Administrator to modify the password or the access level of an existing user m Type in the name of the existing user in the section entitled User ID When the cursor moves into the following sections Password 1 and Password 2 the characters are automatically masked by the lt lt gt gt m Type the new password corresponding to the existing user in the section entitled Password 7 and m Type the same password into the section entitled Password 2 Note the two passwords must be identical which allows the system to ensure that the password typed in the section entitled Password 1 was input with no typographical faults In case there is a discrepancy between the two passwords the user must input the two passwords again Select the corresponding access level in the drop down menu from among the following o Operator Supervisor Administrator or MGP Instruments E 0 00 Click on Modify in order to register these modifications to the existing user account Click on Exit when the Account Management session is terminated or continue on to another task Delete an Existing User m Type in the name of the existing user in the section entitled User ID m Click on Delete m Click on Exit when the Account Management session is terminated or continue with another task Login I
128. on allows a user to recover the Events History stored in the Dosimeters for immediate use or for use at a later date by saving the data in Events History files A separate chapter is dedicated to the explanation of this function see Operation of the Events History Menu Option page 99 This function is accessible through the main menu by selecting Dosimeter Events History Entry Exit This function enables the rapid configuration of all Dosimeters during the Entry Exit into from a controlled area A separate chapter is dedicated to the explanation of this function see Entry into a Controlled Area page 89 and Exit from a Controlled Area page 91 This function is accessible through the main menu by selecting Dosimeter Entry Exit 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 3 4 4 5 3 4 5 3 4 5 1 128110A Y Dosimeter n 535016 SORST Error Style not defined Assignment This function allows allocating a dosimeter to a user with specific information about the user saved to the dosimeter s internal memory Allocation information included a customized display message user s identification and task code The historical interval setting
129. online services 0 of 8 components selected Details Have Disk rea sso m f the window pictured above does not appear select the Windows Installation tab m Select the Communications module by clicking on the Communications option do not activate the module by clicking directly on the check box located to the far left of the Communications option bar m Click on Details 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 130 Dosimass DM 128110A The following window will appear Communications Ed To add a component select the check bos or click to clear it if you don t wank the component 4 shaded box means that only part of the component will be installed To see what s included in a component click Details Components 23 Dial Up Server 0 0 Me E fj Direct Cable Connection 0 0 ME 1E ai HyperTerminal 0 0 Me O S Microsoft Chat 2 1 0 0 MB 5 pace Used by installed components 19 4 MB Space freed up 1 3 MB Space available on disk 493 1 MB Description Provides a connection to other computers via a modem Details OK The following window will appear To add of remove a component select or clear the check bo
130. ont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Remove dosimeter Cancel The new thresholds have been recorded into the Dosimeter The Dosimeter is now active m Take the Dosimeter out of direct proximity with the LDM 2000 or retrieve the Dosimeter from the LDM 101 m Repeat this procedure with a new Dosimeter or click on Cancel to exit from the function 7 2 Exit from a Controlled Area During the exit into a controlled area this function enables the Operator to m Deactivate the Dosimeter Visualize the alarms related to the visit of the controlled area including the dose alarm rate alarm and duration alarm E 0 00 E Obtain the following primary measurement values related to the visit of the controlled area including the O values equivalent to the dose O rate value equivalent to the dose and O duration value The correct procedure is reiterated below From the main menu select Dosimeter Entry Exit x DOSIMASS DM 14 Jun 2002 08 52 13 Hand free File Administration Setup Qi Tools Help Single configuration Multiple contigurations History EntrE sit Assignment The following window will appear When using a Dosimeter with a hand free reader Searching
131. ools Communication Server Client The following window will appear Serial link setup X Serial link Device name Baudrate COM o 300 w Parity Exchange time out ms Even Data size f od stop size Recerving buffer bytes 1 od 4000 Modem extension ge ge Rope goo Fab ees puri IIo Gro che yl 2 Ce eT a eT aA Perret eee eee eee m Inthe Peripheral name field select a new serial port using either COM1 COM2 COMS3 or COM4 m Validate this new serial port by clicking on OK Notes do not modify any parameters since they were automatically configured during the software installation procedure 124 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 12 Appendix 2 Installation of the TCP IP Protocol The following procedure enables the installation of the TCP IP protocol on a PC using the Windows 95 environment This procedure is essentially the same as that used for Windows 98 and Windows NT This procedure requires the use of the Microsoft Windows installation disks 12 1 Installation of the Dial Up Adapter This procedure enables the installation of a fictitious dial up adapte
132. or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 3 4 3 Set Up Menu This menu provides access to the configuration functions of the DOSINET and DOSIMASS Software modules 4 DOSIMASS DM 14 Jun 2002 08 35 02 Hand free Fille Administration time Dosimeter Tools Help Exchange General parameters 3 4 3 1 Exchange This function enables the user to configure the EXCHANGE and more specifically the Dosimeter reader address m From the main menu select Configuration Exchange The following window will appear 4 DOSINET Setup X Connection time out s SE Reader adress 0 OK Cancel Important note At the time of the installation the entire array of EXCHANGE parameters is optimized It is highly recommended that NO modifications be made to the parameters that are accessible via this window The only exception to this recommendation concerns the Reader Address and this exception applies only in the event that the reader address does not correspond to the recommended values See the section Selecting the Address of the LDM 2000 page 8 or Selecting the Address of the LDM 101 page 9 42 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or repr
133. os services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 2 2 3 2 2 3 1 2 2 3 2 2 2 4 2 2 4 1 2 2 4 2 2 2 5 10 Device Configuration with LDM210 Connecting the PC to the LDM m Connect the PC COM1 serial port to the LDM 210 serial port using the supplied standard 9 pin DB9 M F cable m Connect the power cord located in the back of the LDM m Connect the power unit to the AC supply Note In case another serial port is used it would be necessary to change the DOSIMASS configuration see Selection of another serial port in page 123 Select the address of the LDM All LDM210 readers are identified by address 1 In DOSIMASS the user setting for this address should be set to 1 Device Configuration with LDM220 Connecting the PC to the LDM The USB driver must be installed prior to operation Please refer to the LDM 210 220 user manual Connect the cable provided to the USB port of the PC Select the address of the LDM All LDM220 readers are identified with address 1 In DOSIMASS the user setting for this address should be set to 1 Installation of the TCP IP Protocol The TCP IP Protocol must be installed on the PC before any other operations can be performed using the DOSIMASS Dosimeter software When using a PC equipped with a LAN network card
134. osimeter parameters can be transmitted DMC 2000 DMC 100 DMC 90 DM9X with LDM 91 These configurations require the use of an LDM 91 operating in transparent mode in lieu of the LDM 101 Note that in order for the LDM 91 reader to function in transparent mode it must be equipped with internal firmware version examp 532B These configurations react exactly as the two previous configurations As such t not detailed in the pages that follow le hey are For additional information on the LDM 91 and its operation in transparent mode consult the User s Manual Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 128110A Dosimass DM Error Style not defined 2 Mass storage hard Installation and Start up The installation and commissioning of the DOSIMASS consists of the following successive steps m Install the hardware configuration connect the PC to the Dosimeter reader m Install the software onto a computer Configure and establish the links between the PC and the Dosimeter reader 2 1 Required Hardware Configuration When using the DOSIMASS Dosimeter Software with a PC the latter must possess a minimum of the following m INTEL Pentium 233MHz PC co
135. osimeter reader 128110A 61 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 5 2 1 Measures and Thresholds This section reviews measurement and threshold information provided below This information is related to the last entry into the controlled area m Potential activation of alarms and alerts m Measurement and Threshold values relative to primary measures and m Measurement and Threshold values relative to Secondary Measurements The following fields can also be accessed To configure the Dosimeter with new thresholds To preset dose and duration values into the Dosimeter according to the value of the Initialization Conditions which are defined in the Assignment section pages 64 77 and 82 a Dosimeter n 189626 DMC20005 Measures Operating Sub User amp Thresh Assign a Status ue esam foanoratons zones F gaez I Factory Dose alarm Rate alarm Dose warning a Time alarm Rate warning g Primary measurements Internal Hpi1 0 Primary dose 1 9 mem Primary rate 6 00E 1 mremsh Primary dose threshold 9 99E 5 mrem Primary rate threshold 9 99E 4 mremr Primary dose warning T OOQE 2 mrar Primary rate warning 100
136. peaker when the dosimeter is activated Measured rates are this parameter defines the type of rate displayed in the Primary and Secondary Rate fields which are found in the Measurement and Threshold section Maximum the rate retained in memory and displayed after exit is the maximum dose rate measured during the last entry into the controlled area Instantaneous the displayed rate is the current rate measured since the last display update Note In both cased while the dosimeter is in run mode the rate will be displayed according to the radiological conditions present Teletransmission at parameter linked to the serial data transmission using O 68 transmitter receiver please consult mgpi triggered parameter to determine the data transmission mode Externally requires a request from an external device to initiate a data send Periodically the dosimeter will transmit a packet of data every three to five seconds 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 9 2 9 128110A Error Style not defined 1S enables or disables serial data output Displayed Measures defines the measurement display mode when the Dosimeter is acti
137. r of configured Dosimeters is increased m Take the Dosimeter out of direct proximity with the reader m Repeat the procedure with a new Dosimeter or click on Stop in order to return to the main menu 88 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 7 Passage into a Controlled Area RCA This chapter provides the user with a detailed review of the procedure that enables the rapid configuration of a Dosimeter during an Entry Exit into a controlled area Note this function is authorized for all access levels except the administrator However in the operator level it is only possible to activate and deactivate dosimeter 7 1 Entry into a Controlled Area During the entry into a controlled area this function enables the Operator to Activate the Dosimeter Configure the Dosimeter with new thresholds a threshold equivalent to the dose a rate threshold equivalent to the dose and a duration threshold 000 E The correct procedure is reiterated below In the main menu select Dosimeter Entry Exit x DOSIHASS DH 14 Jun 2002 08 52 13 Hand free File Administration Setup Ql Tools Help Single configuration M
138. r partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 1 Overview 1 1 Synopsis This Manual provides users with the information required to ensure effective use of the DOSIMASS Dosimeter software The software has been designed for use with the DMC 2000 dosimeter and the LDM 2000 and the LDM 210 220 Dosimeter readers operating under a Windows PC based computing environment This Manual also provides all of the information necessary to use this software with the previous generation of products DMC 100 DMC 90 dosimeters and LDM 101 LDM 91 readers For information regarding the use of this software under other hardware platforms or operating environments please contact MGP Instruments For more information concerning the Dosimeter and Dosimeter readers please consult the designated User s Manuals see Reference Documents noted below Note This document is designed for users who possess a good working knowledge of the computing environment on which the DOSIMASS Dosimeter software has been installed This includes general working knowledge of functions such as the use of a mouse access to menus and file system management opening saving and closing files The user should consult the appropriate User Manuals for information on the respective operating systems 1 2 Reference Documents For information regarding equipment compatible with the DOS
139. r with the TCP IP protocol in order to allow the PC to dialog with a remote station in this case with a Dosimeter reader First the user must access the Windows Control Panel using the Start button select Settings and then Control Panel isi d d d EJ Control Panel ES Settings AJ Eind oh 3 Printers Pie Taskbar amp Start Menu 2 Run Ey Folder Options i i fora d Log Off Jgustafson Aactive Desktop R Shut Down SB Windows Update Gin Cones SS Paint The following window will appear A S gt 142 rt amp ey aaa E Apis 32bt ODBC Accessibility AddNew Add Remove Date Time Display Find Fast Options Hardware Programs Control Panel FEI CD T amp aj Network S Configures network hardware Game Internet Keyboard LiveUpdate Mail and Fax Modems And software Controllers Microsoft Home K n u Microsoft Home D a Technical Support Mouse Multimedia Passwords PC Card Power Printers PCMCIA Management ame gt s RealPlayer G2 Regional Sounds System Telephony Users Settings 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 125 Error Style not defined m Next double click on t
140. r written consent Format 112175C Error Style not defined Dosimass DM Note For more information see Hardware Configuration with an LDM 2000 page 8 or Hardware Configuration with an LDM 101 page 9 Data transmission between the reader and the dosimeter interrupted The preceding message appears when there is a data exchange interruption between the Dosimeter and the Dosimeter reader which is provoked by the user Other causes of interruptions can appear in the same manner proximity of DMC 2000 from the LDM 2000 insufficient or removal of the Dosimeter from the LDM 101 etc During data exchange between the Dosimeter and the reader the following windows appear 100081 reading mesurements thres amp assignmerr Cancel If the user interrupts the exchange by clicking on Cancel then the following operator messages appear successively Interrupted Interrupted 116 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Then the Configuration window appears in the following manner the fields that are highlighted in red indicate fields that are incoherent 4 Dosimeter n FFFFFF DMC20005 ma aema
141. rations zones block System Factory Sub area dose ee Sub area time 1 0 0 1 0 h 0 fmn O S 2 0 0 2 0 Ih 0 Imn 0 ls 3 3 0 h 0 Imn 0 ls 4 4 0 fh 0 Imn 0 ls 5 5 0 h 0 mn 0 ls 6 6 0 h 0 mn 0 ls 7 7 0 h UO mn OU lE 9 9 0 h 0 mn 0 ls 9 9 0 h 0 mn 0 ls 10 100 Ih 0 mn 0 ls 7 o ho mn 0 s Load configuration configuration Restore initial dosimeter Reread dosimeter Read another dosimeter Write DM Exit Sub zone Operating Principles A controlled area may be divided into several smaller areas called Sub Zones up to 10 An LDM 2000 Dosimeter reader is placed at the boundary of these sub zones and is configured so that it can stamp Dosimeters i e Marker mode 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 5 2 7 128110A Error Style not defined When a Dosimeter passes by an LDM 2000 reader while entering a sub zone the reader stamps its internal memory This Marking records a code related to the reader address and subsequently the geographic location of the passage inside the Dosimeter When the Dosimeter passes by another reader the new Marking allows the d
142. rcise mode which permits the simulation of dose and rate profiles with a reader designed for this purpose CAUTION activation of this mode will disable the radiological functions of the dosimeter The DMC 2000 screen will indicate ext when in this mode 5 2 3 Status This section provides access to the information recorded in the Dosimeter relative to the status of the Dosimeter a Dosimeter n 164086 DMC20005 Measures Operating ser ane Assign Status Ea lositraions pu zones black Syster Factory Low battery EEPROM fault Autonomous mode History saturation Satellite mode exited Time gt 100h Fate saturation M Internal calibration corrupted Dose saturation External calibration corrupted Power lost Optical test failed Detector fault External detector fault Corrupted history Warning s acknowledged M Ils Load configuration configuration Restore initial dosimeter Reread dosimeter Read another dosimeter Write Ohi This information can be of the following types E d d E d d d d d Operating Mode Autonomous or Exit Satellite Mode Dosimeter Management Rate Saturation or Dose Saturation or Events History Saturation or Duration gt 100 hours or Warnings Acknowledged 66 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf
143. reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM z A Sa 32bt ODBC Accessibility AddNew Add Remove Date Time Display Find Fast Options Hardware Programs Control Panel a CD W ES m u amp Ze mork F G Kejbosd Livelpdete MadlandFae Med Configures network hardware onts Pra nternet eyboar welUlpdate all and Fax odems and software Technical Support Mouse Passwords PC Card Power Printers PCMCI4 Management RealPlayerG2 Regional Sounds System Telephony Users Settings J Microsoft Home Multimedia The following window will appear Add Remove Programs Properties El Ei i Install Uninstall Windows Setup Startup Disk To add of remove a component select or clear the check box If the check bos it shaded only part of the component will be Installed To see what s included in a component click Details Components fel Accessibility RjAccessories S E amp Communications 0 0 MB oe C AT Desktop Themes 0 0 MB a 2 Internet Tools 4 6 ME Space used by installed components 19 4 MB Space freed up 2 5 MB Space available on disk 463 3 MB Description Includes accessories to help you connect to other computers and
144. rms Warnings and Measurement Variances Rate alarm Dose alarm Duration alarm End of rate alarm End of dose alarm End of duration alarm End of rate warning End of dose warning End of rate saturation End of dose saturation Rate warning Dose warning Rate saturation Dose saturation Error Style not defined 133 Error Style not defined 13 1 2 13 1 3 134 Events and DM faults Detector fault Detector fault Cleared External ASIC fault dF CNC External calibration fault dF EXt Internal calibration fault dF INt E2PROM fault dF E2P Events History fault dF HIS Optical test fault dF DEt External ASIC fault vanished External calibration fault vanished Internal calibration fault vanished E2PROM fault vanished Events History fault Cleared Optical test fault vanished Follow up events Acknowledgement of passage to AUT Alert acknowledgement Dosimeter activation Dosimeter assignment End remote transmission Authorized in sub zone DMC Only for DMC100 Change battery Start remote transmission Dosimeter deactivation Disassignment Dosimass DM 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style no
145. rms and alerts Measures and Threshold values relative to the principal measurements Measures and Threshold values relative to the secondary Measurements Parameters linked to The activation and assignment of the Dosimeter The initialization conditions and The Dosimeter Events History Information linked to the operating state of the Dosimeter Operating mode Dosimeter management Battery status and Internal operating fault s Parameters that enable the adaptation of the Dosimeter to the specific needs of the user Parameters that relate to the calibration of the Dosimeter Cumulative readings on dose and duration related to entry exit periods in the sub zones Parameters that allow the customization of the Dosimeter display when in the pause mode Predefined messages for use as a mini pager Parameters linked to the internal operation of the Dosimeter Information related to the Events History Index Enables reading of the contents of the EZPROM 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 4 3 2 Parameter Zone The parameter zone is used for m Displaying the parameter values of the read Dosimeter
146. roduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined gt Dosimeter Parameters 5 1 Introduction This chapter provides a detailed view of the entire array of Dosimeter parameters accessible via the Configuration window The accessible information depends upon the selected configuration DMC 2000 with LDM 2000 210 220 o All of the Dosimeter parameters are accessible O Operation in hands free mode DMC 2000 with LDM 101 o All of the Dosimeter parameters which were previously accessible through the infrared communication are available to the DMC 2000 O Operation in infrared mode DMC 100 or DMC 90 with LDM 101 All of the Dosimeter parameters applicable to these dosimeters are accessible O Operation in infrared mode O The remaining portion of this chapter is divided into three sections which correspond to the three configurations mentioned above Each section addresses the entire set of sections accessible in the Configuration window Note the procedure for access to these parameters is presented in a previous chapter entitled Configuration of a Dosimeter page 57 5 2 DMC 2000 with LDM 2000 LDM220 or LDM210 This section provides a detailed description of the entire array of DMC 2000 parameters that are accessible by exchange in hands free mode with the LDM 2000 LDM210 or LDM220 D
147. roduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 3 5 2 Software Initialization 3 5 2 1 DOSINET Initialization m Access the Windows Start menu by simultaneously pressing the CTRL ESC buttons m Press repeatedly on the UP arrow key until the Programs function is highlighted m Press the RIGHT arrow key so that the program groups are displayed m Press repeatedly on the UP or DOWN arrow keys until the DOSIMASS program groups Is highlighted m Press on the RIGHT arrow key so that the software modules are displayed m Press the UP or DOWN key in order to select the DOSINET option 3 5 2 2 DOSIMASS Dosimeter Software Initialization Follow the same procedure listed above however select the DOSIMASS DM option instead of the DOSINET option 3 9 3 Selecting a Function from the Main Menu mE Simultaneously press on the ALT and the underlined letter of a menu function e g press ALT m in order to select the Administration function m Press on the underlined letter of the executable function or select this function using the UP or DOWN arrow key followed by ENTER when the correct function has been selected 3 9 4 Navigation within a dialog box or a window 3 5 4 1 Navigation In order to navigate within a dialog box or a main window several methods exist m Press repeatedly on the TAB key in order to move in a one direction pres
148. rolled Area in automatic mode Dosimeter Menu Entrance Exit Operation and Display of the Events History Events History Operation Function Feature Dosimeter Menu Events History 1 4 4 Configurations The DOSIMASS Dosimeter Software can be used in the following configurations 1 4 4 1 DMC 2000 with LDM 2000 LDM210 or LDM220 This standard configuration consists of using the DMC 2000 with an LDM 2000 LDM210 or LDM220 In this type of configuration the data exchange is performed in hands free mode All of the parameters of the DMC 2000 can be transmitted 1 4 4 2 DMC 2000 with LDM 101 This configuration enables the use of the DMC 2000 with an LDM 101 Infra red reader equipped with a specific adapter DMC 2000 sleeve In this type of configuration the data exchange is carried out in infrared mode The majority of DMC 2000 parameters can be transmitted 128110A 5 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 1 4 4 3 1 4 4 4 DMC 100 DMC 90 DM9X with LDM 101 This configuration ensures total compatibility with these products Dosimass DM In this configuration the data exchange is conducted in infrared mode The majority of D
149. rvals a4 Load Save 4 gt Print Text Summary crant Text Exit export history history This information is the same that that which appeared in the Summary portion of the section entitled Factory under the Dosimeter Parameters section pages 75 80 and 86 A supplementary parameter appears nevertheless Interval Numbers this parameter corresponds to the number of total intervals in the Events History multiplying this number by the Events History Period provides the total duration of the Events History Note from the Factory tab the EEPROM Events History can be read Input the field Next Address to read in the E2PROM Window with the Start Address see the screen capture above See Dosimeter Parameters page 61 106 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 9 9 Historic Display in Graphic Format In order to display the Events History in graphic form click on Graph from the Events History window The following window will appear s Dosimeter n 200002 e Soft Dosimass_L exe HIS SAMPLE HIS 10000 0 1000 0 jaca ninis tala 100 0 g 1 E 400 2 10
150. s depending upon the type of Dosimeter in question certain parameters do not exist As such these parameters are not displayed Note in the below example the secondary measurements are not shown 56 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Primary measurements Internal Hp 1 0 7 Primary dose 0 0 mrem Primary dose threshold 1 00E 0 mrem Priman dose warning 3 00E 1 mrem Time 17n 0 mni4 ls 4 3 3 Function Keys The function keys are located at the bottom of the Configuration window The corresponding functions are activated a simple click Load This function key allows a user to select a configuration configuration file that was previously defined and load the corresponding parameters onto the Configuration window Attention after clicking on this key the values displayed on all the sections of the Configuration window will replace those read previously directly from the Dosimeter To restore the initial configuration see under the function key Restore initial dosimeter cave So This function key allows a user to save all of the configuration parameters currently defined in the Configuration window dir
151. s ALT TAB to move in the opposite direction within a particular section or to access a specific button or any other element E Simultaneously press the ALT key and the underlined letter of the section button or element in question Note in certain cases pressing on the ALT key and the underlined letter will activate the function 3 5 4 2 Activation of an Element m n order to activate the function that corresponds to the selected element press the ENTER key 128110A 49 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 3 9 4 3 3 5 4 4 3 5 4 5 3 5 5 50 Input of a Numeric Value m Input the numeric value directly using the keyboard e g 001 or 1E 3 or m Press the UP arrow key in order to increase the current value or m Press the DOWN arrow key in order to decrease the current value Input of an ON OFF Value Dosimass DM m Press the ENTER key in order to switch the input value from ON to OFF and vice versa Select a List Item m Press on the DOWN arrow key in order to display the proceeding element in or the list m Press on the UP arrow key in order to display the preceding element in the list Locating the DOSIMASS
152. s must be identical Ssolution re enter the password input again Cause incorrect Events History reading size Solution modify the size of the EZPROM window see System under Dosimeter Parameters Cause PC memory insufficient Solution close all other open applications except DOSINET Verify that the memory size of the PC is sufficient and increase the capacity if required Cause PC memory insufficient Solution close all other open applications except DOSINET Verify that the memory size of the PC is sufficient and increase the capacity if required Cause input incorrect Solution input password again If the problem persists or if the information has been forgotten contact the person in charge of the Account Management of the user see Access Levels Cause the user does not possess the access authorization required to use the current function Solution Choose the appropriate access level from the main menu by selecting Administration Identification see Identification page 37 Cause the user does not possess the access authorization required to use the current function Solution Choose the appropriate access level from the main menu by selecting Administration Identification see Identification page 37 Cause input incorrect Solution reenter data If the problem persists or if the information has been forgotten contact the person in charge of the Account Management of the user See Access Levels
153. s of these parameters may seriously impair operation and accurate response of the dosimeter MGP Instruments will not assume liability for modifications to these parameters made either without specific advice or not under immediate supervision 4 Dosimeter n 189628 DMC20005 E m l a l Sub ser amp TAresh Assign status Farar rel EWS zones block Internal Detector i x System Factory DeadTime 3 K1p Et 2 96E 2 Kis Ef 0 00E 0 Calibration amp Dec 2000 Chi mean Kp Eff 0 00E 0 kos Eff O 00E 0 Minimum Bkg 10752 s Ch amp CH3 Thr ao k3p Eff 0 0000 Kas Eff 0 00E 0 Polarization ats Dead Time 282 2115 Kap Ef 3 2 0000 K4s Eff 0 00E 0 External Detector Bree Dead Time se K1p Et 3 00E 2 Kis Ef 1 00E 0 See 29 4 Nov 2000 Chi Thr 425 K2p Eff 1 00E 0 K2 Eff 1 00E 0 Minimum Bky 4 10752 s Ch2 amp Ch3 Thr aps Kap Ef 30 0000 Kas Eff 1 00E 0 Polarization Shs Dead Time V283 9714 Kp Eff 1 0000 K4s Eff 1 00E 0 Restore initial dosimeter Load configuration configuration Reread dosimeter Read another dosimeter Write DM Sub zones The section entitled Sub zones provides the cumulative totals of the dose and duration data relative to each entry into a sub zone in which an LDM 2000 reader stamped the Dosimeter a Dosimeter n 189628 DMC20005 Measures Operating Sub User KE Assign Status Bea t
154. se 4 Value of the calculate rate at the dose increment Zooming an Area using the Magnifying Glass The zoom out amp and zoom in QJ tools enable the magnification or reduction of an area with a simple click onto the selected area To navigate over the entire period corresponding to the Events History a scroll tool is located directly under the graphic window Note see the parameter entitled Events History Period in the Dosimeter Parameters section under Assignment page 65 The black bar pointer allows the user to designate a period situated between its position and that of the blue bar cursor The use of the magnifying glass amp allows the user to adjust the magnification over the selected area left diagram illustrates before magnification and the graph below shows the effect with the magnification tool Q 109 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Dosimeter n 2000027 e Soft Dosimass_L exeSHISSSAMPLE HIS z i a er ee ES a eee ED es E C Eee ey i i ji LP r eA 2 SS ee ee Ey EEE m i TE M Y ee ed E DE A AmA 110 128110A Publication traduction et reproduction totales ou partie
155. sen eaa E AEE E aa 115 10 12 Listof Operator Messages iiien aE EN 117 192 Keyboard Shortc ts HOtkKEVS eienn a S 121 11 APPENDIX 1 CUSTOMIZED SOFTWARE CONFIGURATIONG c ccecseeseees 123 11 1 Selection of another Serial Dorsair a ae 123 12 APPENDIX 2 INSTALLATION OF THE TCP IP PROTOCOL cccsccseseeseseeeees 125 12 1 Installation of the Dial Up Adapter ccccccccssccseececese cess eeseeeeseceeeeeeeteeeteeteeenaeeeaes 125 12 2 Installation of the Windows COMMUNICATION MOMUIE cceeceeeeceeeeeeeeeeeaeeeeeeeeees 129 13 APPENDIX 3 EVENTS HISTORY SUPPLEMENTARY INFORMATION 133 13 1 LISCOF Events inan Events FIIStOFY iicctice tes eben neie e E EE EEN A 133 13 1 1 Alarms Warnings and Measurement Variance ccccceseeceeeeeeeeeeeeeeeees 133 13 1 2 Events and DM faults acs terveandiutinictectniea sted ae i a 134 1 3 120 PONOW UD EVENTS iis cccvesseveesepantedeustoneseuabseaertinesteantieesse EE ASE 134 132 IP AATEG Historncal FIC AGED ocena e o a a a Redencetneentabebiwee 136 133 Example Of aiprinted NIStTOGlaMl isi ices a a a aa 136 14 GEOSSAR Ma os tees ice Toa ice ioe oie Se ws dae De ede De a Pos See Tena eee Poe Done E E E R 143 Vill 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction eithe
156. ser to view the entire array of parameters of a Dosimeter by simply clicking on the different tabs of the Configuration window see the preceding section Access to this function can be carried out in two ways m From the main menu by selecting Dosimeter Single Configuration or m Directly from the Configuration window as follows o Place the Dosimeter in close proximity to the LDM 2000 in the case of the DMC 2000 or insert the Dosimeter into the LDM 101 Reread o Click on dosimeter or g Read another the procedure is executed in the dosimeter proceed the same as in the main menu After the temporary phase of Dosimeter reading the Configuration window will appear with the Dosimeter parameters Modification of Dosimeter Parameters This function allows the user to conduct selective modification of the parameters of a Dosimeter This function is accessible from the Configuration window see Access to the Configuration Window page 51 Reminder the modification of parameters is only possible for those users who have Supervisor level authorization and MGP Instruments The procedure is as follows m From the Configuration window modify the parameters by inputting new values into the corresponding fields m Once the parameters are modified as desired click on Write Dhl 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite
157. simeter at the time of its activation In order to maintain the cumulative dose the Autonomous Dose parameter must not be in the Reset to Zero position see the section entitled Operating Parameters page 67 o Preset measures and clear alarms this option enables the pre positioning of the dose and duration values with the measurement values input in the Measurement and Threshold section page 77 Start New Events History this option enables the user to begin a new Events History at the time of the activation of the Dosimeter from within the Assignment Tab or to continue with the Events History in progress Please note if No is selected additional histogram events will be added to the existing histogram and may not reflect the actual date and time Events History Period this parameter enables the definition of the specific time period of the Events History used for the calculation of the dose increments including the following parameters 10 seconds 1 minute 10 minutes 1 hour 24 hours 000 00 128110A 65 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM m Exercise Mode this feature permits the dosimeter to be used in training and exe
158. sitioned on the start address of the most recent Events History m Key Bead z2PRon this key allows the initiation of the E2PROM readout from the address specified in the Next Address to Read field Print m Key This allows the user to print the E2PROM readout at the address specified m E2PROM Contents this section allows the user to visualize the EZPROM data in hexadecimals read at the address specified in the Next Address to Read field DMC 2000 with LDM 101 This section provides all of the sections contained in the Configuration window when the DMC 2000 Dosimeters are used with an LDM 101 reader operating in infra red mode All of the differences relative to the standard configuration DMC 2000 with LDM 2000 are identified in the following sections The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services Dosimass DM Error Style not defined 5 3 1 Measures and Thresholds 4 Dosimeter n 176356 DMC20005 x EEE TEA _ a Sa r mr Assign Status E lessons ee block System Factory Dose alarm a Rate alarm a Dose warning _ 3 Time alarm Rate warning _ Primary measurements Internal Hatt 0 Primary dose 16 6 mem Primary rat
159. slot OOOK AN a age 00 l Start Doseincrem Acumulated dose Calculated Rate Dose diff between cursors End 22 Jan 1998 14 55 11 22 Jan 1998 15 11 31 A 1 1 80E 2 H iThu 22 Jan 1998 15 17 16 Key x Calculated Rate Thu 22 Jan 1998 15 16 46 Thu 22 Jan 1998 15 16 40 Thu 22 Jan 1998 15 13 16 Dose increments Acumulated dose a Q 9 Load Save 4 D history history d a S Several methods may be used to navigate with the cursor or the pointer m Position the mouse pointer on the graphic area where the cursor pointer blue bar is desired Click on this area the cursor pointer will move to the selected area 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 9 9 2 128110A Error Style not defined m Directly select the cursor pointer by clicking above it with the mouse Do not release the mouse button Move the mouse in order to move the cursor pointer to the desired location After moving the cursor the Events History data that corresponds to its new position is displayed in the blue rectangles located in the data field 1 Date and time 2 Value of the dose increment and 3 Value of the cumulative do
160. t defined Unlock calibration DMC Only for DMC100 Battery change alert vanished Activation duration saturated at 100h Sub zone entry DMC Only for DMC100 End of presetting of primary dose and duration End of duration saturation End of Events History saturation Forbidden in sub zone DMC Only for DMC100 Instantaneous rate measurements Max rate measurements Passage to AUT Passage to SAT Battery low Battery ok Presetting of primary dose and duration alert acknowledgement Reset Events History saturation Exit sub zone DMC Only for DMC100 Exit SAT mode 300 baud remote transmission 4800 baud remote transmission Automatic remote transmission Initiated remote transmission Calibration lock DMC Only for DMC100 128110A 135 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM 13 2 Printed Historical Header During the printing of a history each event of the same type is aligned to help with the visualization see illustration below BPosimeter n 24oodc2 ea sottsbosimass_k exe HIS S4MPLE HIS History period 10 5 Start date amp time Thu 22 Jan 1998 14 55 11 alarms amp anomalies eyents amp faults Tracking events
161. t mode satellite Backlight disabled DisplayinPause PAUSE Alarms reported by flash Measured rates are mamun Low battery sound alarm always enabled Teletransmission at 4800 bauds Chirp rate every pulse triggered externally Speaker disabled Dycnlase of time enabled of remaining time disabled veences BERD Read another paai Save rn uration i configuration i dosimeter dosimeter Restore initial dosimeter The secondary measurements display option is inaccessible 78 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 5 3 5 Calibrations a Dosimeter n 176356 DMC20005 heer eee weer ATERN Assign Status Param Seer Internal Detector Dead Time E Calibration 29 May 2000 eee P wraad Aaen Ae Minimum Bkg 10752 S Onrpg Polarization 315 Load configuration Restore initial dosimeter Save configuration Read another dosimeter Write DM dosimeter Only certain calibration fields are accessible 5 3 6 Sub Zones This section is inaccessible 5 3 7 User Block 4 Dosimeter n 176356 DMC20005 E xj ane Soar
162. tales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined Insert Disk Ea Click on OK to continue The file copy process will be executed During the file download the following windows will appear The user should simply follow the recommendations indicated in these windows Once the installation is complete the following dialog box will appear 2 You must restart your computer betore the new settings will take effect h Do you want to restart pour computer now In order to activate the TCP IP protocol the PC must be rebooted If there are other software installations that must be executed for example the DOSIMASS Dosimeter software the user can reboot the PC once all of the operations are terminated To reboot the computer at this time m Click on Yes To reboot the computer later m Click on No 12 2 Installation of the Windows communication module The Windows Communication Module must be installed so that the TCP IP protocol can be configured m From the Control Panel to access the Control Panel consult the section entitled Installation of the Dial Up adapter page 110 double click on the Add Remove Programs icon 128110A 129 Publication traduction et
163. terdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined InstallShield Wizard Dosimass DM Setup is preparing the Install hield Wizard which will guide you through the rest of the setup process Please wait As soon as the download is complete the window will disappear DOSIMASS Setup Welcome to the InstallShield Wizard for DOSIMASS The InstallShield Wizard will install DOSIMASS on pour computer To continue click Next Cancel If the user did not shut down all applications prior to commencing the installation procedure then it is recommended that the user do so at this time If the user exits at this point then the installation procedure must be reinitiated from the beginning To quit the installation procedure click on Cancel To continue the installation procedure click on Continue If the user clicks on Continue then the following window will appear 128110A 13 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 2 3 3 14 DOSIMASS Setup
164. the LDM 210 220 28 2 4 4 Startup using Windows Desktop for use with the LDM 2000 or the LDM 101 Readr I R A E E EE E E E 29 128110A V Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Vi Table of Contents 2 5 Shutdown of the Software MOdUIES cece eceececeececeeeeeececeeeeeececeeeeeeeeeeaeceeeeevaeeeeeeaees 31 2 5 1 Shutdown of the DOSIMASS Dosimeter Software Module c cece eee 31 2 5 2 Shutdown of the DOSINET Software Module ccc eececeececeeceeeeseeneeeees 31 GENERAL OVERVIEW titveiiestivstisaiveiouivinertivccssaineetienneiinenieiaennienvenenivnenvniied 33 3 1 Haid ocere 8 6 1 p paeeeeeeem meme ree atest ttre a ert aE ORT SUPE a mE 33 3 2 ACCESS LEVES asime hun orc asec earner tenes ante lade elated pou eet boat uaaniiensaetie lacs das tied 33 S221 Operor ECVE aaan E 33 S22 OUPEMSOr LEVEL sonera A A O NE 34 O25 AOMIPISIPAIOl Leye esia a a a a 34 3 2 4 Manufacturer Factory Level cccccccccceccceeeceeceeeeeeeeeeseeeseaeeseeeeseeseueeseeees 35 i MAOC CE gibt Netter ea tere Serre E RQ Pe Men ee een near ene ee ee 35 3 4 Functions Accessible from the Menu Bat c cccceeeececeecececeeeececee
165. the specified historic interval The term zone entry is a means to indicate entry into the controlled zone After this the dosimeter is activated and could be marked A histogram consists of a series of chronological events and measurements stored in the dosimeter memory It is used to determine when and what dose and events occur during the use of the dosimeter both in RUN and PAUSE modes The histogram is specific to one dosimeter A dosimeter can stored several histograms in a circular mode FIFO type See infra red mode Dosimeter reader model101 is a reader that operates in the infra red mode only and can be used as an interface reader to configure and manage of DMC100 DMC90 DM9X and DMC 2000S dosimeters Dosimeter Reader model 2000 Dosimeter reader that operates in the hands free mode used as an interface for the configuration of the DMC 2000 family dosimeters and for access control in a centralized dosimetry system Dosimeter Reader model 210 Dosimeter reader that operates in the hands free mode used as an RS 232 interface for the configuration of the DMC 2000 family dosimeters and for access control in a centralized dosimetry 145 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175
166. tion none for the current situation Modify the provisional duration of visits to controlled areas in the Events History Period Cause incorrect internal structure of the file his containing the Events History An alteration of this file has made the corresponding data irrecoverable Solution none A new history may be started but the most recent histogram is unrecoverable Cause incorrect internal structure of the file his containing the Events History An alteration of this file has made the corresponding data irrecoverable Solution none A new history may be started but the most recent histogram is unrecoverable Cause incorrect Events History reading size Solution modify the size of the EZPROM window see System under Dosimeter Parameters page 72 Cause problem with the data exchange between the Dosimeter reader and the PC Solution Verify that the Dosimeter reader is plugged in Verify that the cable between the Dosimeter reader and the PC is correctly installed COM1 serial port Verify that the address of the Dosimeter reader is correct 1 for LDM2000 0 for LDM101 For more information see Hardware Installation page 8 Incorrect Size DOSINET frame transmitted Cause incorrect internal structure of the file his containing the Events History An alteration of this file has made the corresponding data irrecoverable Solution none 128110A Publication traduction et reproduction totales
167. tion traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Load an history El Ei o C Dosimass Loak in E Dosinass c eE Files of type his Cancel E Select the directory under which the Events History files are stored using the scroll down window entitled Browse All of the Events History files are displayed extension his m Select the desired Events History file and m Click on Load The events contained in the Events History will then appear in the Events History window see the following 104 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined 9 7 Display of Historical Events After proceeding with the reading of an Events History the corresponding events are directly displayed in the Events History window See Reading an Events History page 103 4 Dosimeter n 189628 DMC20005 ed O02 Feb 2000 14 51 dosimeter deactivat
168. tion of the new MGPI template Updated according to DEV N 12511 DEVS 13420 added information relative to the new readers LDM220 and LDM210 and complementary information for the installation procedure DEV 13516 REV 6614 modification of the installation screens for the dosimeter configuration Apply new numbering sequence First issue and translation of the user guide N 117905D to French Record of revisions Revised pages First edition p1 p3 p p5 p10 p42 p61 p95 p101 1 4 2 2 2 3 2 2 4 2 3 5 5 2 Note 13 2 13 3 14 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Table of Contents Dosimass DM Table of Contents te OVERVIEW scecertessicectcauiiseteaatusubenteawial aniaedecucdaucetanqeucatauedenabucusentanateeusaneaneatuvoateutangaeeuiee 1 1 1 SYNOPSIS aesa aai a cent soot ie Sada cried a Te NE 1 1 2 FRETEFENICS DOCUMEN Sereia nar A T al niauceaceneae 1 1 3 CONV CMON S inanan AA 2 EST Operating SYSUCMD rarse E a i aS EA NS 2 toz Seene IDUNE S iea A E r A 2 kas Functio seleccion via MeN cites scicccetcwaet tc vasteestiuieenierthsacatodiveheaaeeeeniee 2 toa TErmMmNOOGY ssc sc nae Sauce 5 cece Seca aie oes geen eae a a a 3
169. ttery Low m Loaded battery required level the minimal power level required to allow the operation of an inactive Dosimeter during a limited time defined by the parameter Battery Autonomy Low DM deactivated MGP Instruments expresses this power level in internal units for a deactivated Dosimeter m Unloaded battery required level the minimal power level required to allow the operation of an activated Dosimeter during a limited time defined by the Battery Autonomy Low DM activated MGP Instruments expresses this power level in internal units for an activated Dosimeter Optical Test allows the validation of the optical test device photon emitter Detector Saturation defines a saturation threshold for the detector 128110A 73 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM Model an MGP Instruments code that defines the entire set of options and factory settings requested by the client for the delivery of the Dosimeter Dosimeter Hardware identification number for the Dosimeter serial number This number is assigned at the time of the manufacturing of the Dosimeter and enables manufacturer after sales servicing This number is also marked o
170. ublication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Operator Message Label Access Denied Incoherent DM Command Transmitted Received Reader Connection Fault Disk Full Multiple Dosimeters Reiteration failure Data incomplete Illegal format in the Events History file User ID already in existence User ID unknown Interruption Reader could not synchronize with a DM 118 Dosimass DM Diagnostic Tool Cause the user does not have the required authorization to use the current function Solution Choose the appropriate access level from the main menu by selecting Administration Identification see Identification page 37 Cause Solution Input the command that lead to this fault once again If the fault persists contact MGP Instruments See the message Reader could not synchronize with a DM E E E E Cause the disk on the PC is full Solution Eliminate unused files and applications Add a new hard disk or replace the existing disk with a more powerful disk Cause several DMC 2000 Dosimeters are located in close proximity to the LDM 2000 reader Solution Make sure that only one Dosimeter is in close proximity to the LDM 2000 reader at one time Cause several unsuccessful attempts were made by the Dosimeter reader to record the data in the Dosimeter Solution begin again
171. ultiple contigurations History Ent Ewit ee hignment The following window will appear When using a Dosimeter with a hands free reader Searching a dosimeter Cancel m Position the Dosimeter within close proximity of the LDM 2000 128110A 89 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined Dosimass DM When using a Dosimeter with an LDM 101 Insert a dosimeter Cancel m Insert the Dosimeter into the LDM 101 The following window will appear which contains threshold values appropriate the the dosimeter confiuration i e with or without dose and dose rate warnings or time thresholds 4 Dosimeter 7 7777 DMC2O005 Primary measures Dose Threshold O0E 2 mrem Rate Threshold 1 00E 2 mremih Dose waning 2 00E 1 mrem Rate warning 2 006 7 mrem Time Threshold ob h 0 mn Note in order for this window to appear the Dosimeter in question must be inactive paused m Type in the threshold fields with the values to input into the Dosimeter Click on or press enter The following window will appear 90 128110A Publication traduction et reproduction totales ou partielles de ce document s
172. v cc cies eecceees nese cecescecanessavieeences sede deesieeidesiiaveesa ed dsadieges 58 4 5 Modification of Dosimeter Parameters vvicriveiriswisisedevauwrnactaincivadushaveseioueiveldeiwaeudederianon 58 4 6 Downloading Parameters from a File ccccccccceccceeecceeeceneeceeeceeeeseeseuseeaeeseneeseeesaues 59 4 Saving Parameters toa FIle cccts ttc tn cele cte aera teeth bad os hag ye cated eee ba na due aa 60 DOSIMETER PARAMETERS c ccccecececececeneececececececeneesecececeneneneececeaeaeneneeseneaeaeees 61 5 1 AeA UT CIA Uoer feet wheat a Bata ee Ge a clean wetted aacetiee omic enews dts iaeanacmuatiate 61 5 2 DMC 2000 with LDM 2000 LDM220 or LDM210 0 ccc cececeeeeeeeseeeeeeeeeeeeeeeeeees 61 5 2 1 Measures and TATESMOIGS cc cetecs ewer tenerens tere N used slau laud oom Oe iiroellae a dtaliaetenrasa ae sates 62 ZZ ENS SUI SIN sarc haa setae eee ee ee ese a eden Palos oere eee 64 5 2 3 Status 66 524 Operating Parameters cineri a eea eRe area oceenced 67 520 CAID ralon Sea e a a a ee r a ee TN 69 5 260 SUD ZONCS seien aE a E EDI 70 LLN 2 XS Al ws 8 ae enn ee ee a r a A EA 71 I Or SOV SION r tne ge let sais aatetarta tates ee ceernseeenineee S TE 72 929 FACON po seetet sti caccacaaer eS actee ta tene aga eDvacPetee ta laiaa one ae dota Tact eae eh dea iedeat es 15 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite d
173. vated display of Primary or Secondary Measurements Display Format defines the format of the measurement displays millirem and the number of digits in the display range Floating Point permits the display of 5 significant digits as well as the d and r associated with the dose or rate indication Fixed Point permits the display of 6 significant digits However the d and r associated with the dose or rate indication will not be displayed Rate Alarm enables or disables the dose rate alarm Time Alarm enables or disables the time alarm Also provides the user with the option to acknowledge the time alarm Warning enables the validation or invalidation of warnings Rate Alarm Latching Once the rate threshold is exceeded this feature keeps the dosimeter in alarm state audible and visual indications active until the dosimeter is turned off applicable to firmware versions V2 8 or greater Backlight enables or disables the backlight function on DMC 100 dosimeters Alarm s reported enables or disables the LED flash during alarm Low battery sound alarm enables or disables audible beeps during bA LO alarms Chirp rate allows the user to choose the frequency of audible beeps as dose is accumulated by the Dosimeter Speaker enables or disables the speaker Time Display Allows the current time in HH mm when you press the push button in run mode the time display feature simulates an intern
174. vided below 1 Select Start Programs DOSIMASS DOSINET in order to setup the connection with the Dosimeter reader 2 Select Start Programs DOSIMASS DOSIMASS DM in order to start the DOSIMASS Dosimeter software 128110A 27 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 2 4 3 28 jAccessories ia lomega Tools j WP smile doc E mgpi_app k 6 C A Horton Antivirus d B Dial MOP StartUp EH Dutlook winzip gt Ba Witdetutt A MasterClips d F 2 IXI stuff a Crustal Reports for SOTA 32Bit f J P User Muclear Ls Microsoft Access a cardfile Microsoft Binder a Super exe 36 Microsoft Excel E MAS 90 T Microsoft Outlook OB webFeret E Microsoft PowerPoint i ED winzip EF Microsoft word He MS DOS Prornpt ae GJ Windows Explorer es 2 Documents A MAS 90 For Windows B Settings j erm bi T ia Dos inet AJE Find Hel 2 5 Smarts unl CELT r TEA T m De ooo amp fete Zi Te ess ey Microsoft Interactive CD Sample wy Sus F SMARTS Administrator i 2 F b 42 Teleview MR DOSINET EXE 3 E Uninstall Dosinet MGF Instruments Dosimass DM
175. vidual Configuration of a Dosimeter coefficients l Dosimeter Menu Single Configuration Calibrations Readout of a Dosimeter EEPROM Individual Configuration of a Dosimeter Dosimeter Menu Single Configuration Factory Dosimeter Transition IN OUT of a Enter Exit Function Controlled Area Dosimeter Menu Entrance Exit Mode with the Dosimeter Dosimeter Menu Single Configuration 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM Error Style not defined DMC_MANAGER Features Corresponding Features of the DOSIMASS Dosimeter Software Note for the user the Message Management feature is transparent Dosimeter parameter change Individual configuration of a Dosimeter Dosimeter Menu Single Configuration Dosimeter readout status Individual configuration of a Dosimeter Dosimeter Menu Single Configuration Status Modification of the Dosimeter Efficiency Individual Configuration of a Dosimeter Coefficient Dosimeter Menu Single Configuration Calibrations Dosimeter Transition to Pause Individual Configuration of a Dosimeter Dosimeter Menu Single Configuration Assignment Dosimeter Transition IN OUT of a Enter Exit Function Cont
176. x If the check bos is shaded only part of the component will be E ES Dial Up Networking 12Me Add Remove Programs Properties El Ei i Install Uninstall Windows Setup Startup Disk Installed To see what s included in a component click Details Components fe Accessibility Accessories e E amp Communications 0 0 MB a O A Desktop Themes 0 0 ME tee 2 Internet Tools 4 6 MB BES pace used by installed components 159 4 MB Space freed up 2 5 MB Space available on disk 463 3 MB Description Includes accessones to help you connect to other computers and online services Oof 8 components selected Details Have Disk coc sso m Click on OK Error Style not defined m Activate the Dial Up Networking option by clicking on the check box then click on 131 Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Error Style not defined 132 If the Windows installation support CD ROM for example is not installed the us be asked to insert the disks at this time In this case the following window will ap Insert Disk x Please insert the disk labeled Windows 95 CD ROM and then click OK m Click on OK to
177. y Computer ell Floppy A ee C Be D eg 19990406_1 E SIMVIEW_SUITE F eo CreateDatabase B CreateTables fas _INSTS 21 EX _IS0EL EXE a sys cab y userl cab cvirtdll cyirte dll DATA TAG 23 datal cab i BA Dosicryptexe lang dat z layout bin os dat a Fe SETUP EXE EJ SETUP INI 3 Setup ins E setup lid The following window is displayed Choose Setup Language p File Folder File Folder File Folder File Folder File Folder Ex_ File Application Cabinet Cabinet Application Exter Application Exten TAG File Cabinet Application DAT File BIM File DAT File Application Configuration Sett Internet Communi LID File Dosimass DM 6 9 99 11 34 6 9 99 11 34 6 9 99 11 34 6 9 99 11 34 6 9 99 11 34 22 98 5 54 1 27 98 10 0 3 23 99 3 00 4 13 98 6 00 4 13 98 6 00 3 23 99 3 12 a 2 3 2 Language Choice The specified language will be used for the remainder of the software installation procedure by the DOSIMASS Dosimeter Software the operator should 1 Select the preferred language using the drop down window 2 Validate the selection of the preferred language by clicking on OK The window illustrated below will be temporarily displayed It provides the status of the downloading process for the DOSIMASS software installation 12 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement in
178. y of functions of the DOSIMASS Dosimeter software is accessible using the menu bar see below These functions are accessible using the mouse or the keyboard Note access to certain functions is only authorized if the user has the appropriate level of access defined by the password for more information consult the section entitled Access Levels page 33 The list of primary functions is reiterated below m Exit the application File menu and m On line help function and information about the software version Help menu File Menu Ctri Q This menu allows the user to exit the DOSIMASS Dosimeter software E DOSIM4ASS DH 14 Jun 2002 08 31 21 Hand free Administration Setup Dosimeter Tools Help i Ctrl 0 In order to exit the DOSIMASS Dosimeter software 128110A Publication traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites sauf autorisation crite de nos services The publication translation or reproduction either partly or wholly of this document is not allowed without our written consent Format 112175C Dosimass DM 3 4 2 3 4 2 1 128110A Error Style not defined From the main menu select File Exit The following window will appear Are you sure you wantto quit DOSIMASS DM Cancel Click on Exit or press enter Administration Menu This menu provides access to the functions that allow the user to manage the different access lev
179. yle not defined Dosimass DM E Speckled Background when the label and the field s background appear speckled then this parameter cannot be transmitted in infrared mode In fact although it only exists in the memory of the Dosimeter this parameter cannot be transmitted by the infrared exchange protocol This ensures the compatibility of exchange with other types of Dosimeters Primary measurements Internal Hp 1 0 Primary dose 4 6 mrem Primary dose threshold 1 00E 5 Prima dose warning 2 006 3 mrem ONST WUnneeceeeemeneeeeaeemeanne rae eeeeneaececeeeneaaeaeeseeeenemeeeeeennaeeesnneee m Red Border when the field s background is outlined in red then the read values that correspond to this parameter are incoherent This problem can be linked to an interruption in the transmission between the Dosimeter and the reader Primary measurements Internal Hp t 0 Primary dose 0 0 Primary dose threshold 1 00E 2 mrem Primate dose warning I 00E 1 mre Time jo h jo mn D 5 Secondary measurements nterna Hp 0 07 Secondary doze Secondary dose threshold 1 00E 2 mrem Secondary dose warning 5 00E 7 EEN m Alarms and Warnings certain parameters such as alarms and warnings are represented in the form of a light When their respective colors are red and orange then the corresponding alarms and alerts were activated during the last visit into the controlled area Dose alarm _ Dose warning m Nonexistent Parameter

Download Pdf Manuals

Related Search

Related Contents

POWER WALKER VI 400/600/800  TRAILER SERVICE MANUAL  Orion Car Audio HP-2300 Stereo Amplifier User Manual  User`s Manual - Sequoia Scientific, Inc.  MANUEL D`INSTRUCTIONS KPC768M  INTRODUCTION - Datasmith Payroll Central  Samsung PG113U Benutzerhandbuch    Manual del Sistema - Consejo de la Judicatura  Da-Lite Cinema Contour  

Copyright © All rights reserved. Failed to retrieve file