Home

Wireless Range Extender INW5000

1. 10 4 Wireless Universal Repeater In universal repeater mode ISY Wireless Range Extender acts as the AP and client simultaneously Choose Wireless Settings gt Wireless Universal Repeater and the Wireless Universal Repeater page is displayed SSID of Extended Interface Set the SSID of the repeater Security Options Set the security encryption mode for the repeater It is recommended to configure the repeater with the same encryption mode as that of its uplink AP After finishing settings click Apply to save the settings 79 English Chapter 10 10 4 1 1 Using the WPS Button WPS connection to the uplink AP In the Repeater mode with WDS disabled press the WPS button on the side panel of ISY Wireless Range Extender in 3 seconds and release it And press the WPS button on the uplink AP Then they can start WPS session WPS connection to the downlink client device In the Repeater mode with WDS disabled press the WPS button on the side panel of ISY Wireless Range Extender for 3 10 seconds and release it And press the WPS button on the client device Then they can start WPS session Note The SSID authentication and pre shared key for ISY Wireless Range Extender will automatically change to the same as those of its uplink AP after ISY Wireless Range Extender succeeds in connecting to the uplink AP through the WPS button mode 80 WPS As AP Select a setup method PBC mode recom
2. 9 Web Configuration for the Router Mode 9 1 1 Router Status Choose Running Status gt Router Status and the Router Status page is displayed 50 Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date Internet Port MAC Address Internet Access Mode IP address IP Subnet mask Default Gateway Domain Name Server LAN Port MAC Address IP Address IP Subnet Mask Wireless Port Wireless Network Name SSID Region Wireless Channel 802 11 Mode Wireless Radio Broadcast Name Wireless Isolation Wi Fi Protected Setup WPS Wireless Security Mode Show Statistics Connection Status V1 0 0 V1 0 0 Wireless Router Router Mode 1971 01 01 09 22 57 00 1E E3 5B DE 23 Disconnected DHCP 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 1E E3 5B DE 24 192 168 100 254 255 255 255 0 PocketAP 001 China Auto Mixed 802 11b g n Enabled ON OFF ON None Statistic Information Port Status TxPkts RxPkts Collisions Tx Bis Rx Bis Up Time WAN LinkDown 0 0 0 0 0 00 00 00 WLAN Auto 28540 72017 0 25757402 15535841 01 25 03 System Up Time 01 25 20 Poll Interval 5 rang Set eng In this page you can view information about the current running status of ISY Wireless Range Extender including system information connec tion status of the Internet port LAN port status and wireless network status Click Show Statistics and the Statistic Informatio
3. Mevcut Wi Fi aginizin kapsama alanini genisletin H z 300 Mbps ye kadar Bant 2 4 GHz
4. PIN Personal Identification Number If your Adapter supports WPS please click on Generate a Enter Clients PIN Sa client Security Pin to input on the AP Router Gateway and papper ter iwi put the generated client PIN number here As Client Select a setup method Push Button recommended You can either press the Push Button physically on the router or press the Button below soft Push Button Start PBC OPIN Personal Identification Number Step 2 Press the WPS button on the network adapter or click the PIN mode PBC button in the network adapter configuration tool within 2 minutes to start WPS connection After WPS connection is Step 1 established the following page is displayed indicating that the WPS connection is completed Select PIN enter the PIN code of the network adapter refer to the client of the network adapter and click Start PIN to start WPS connection English Chapter 10 WPS Setup As AP Select a setup method Push Button recommended You can either press the Push Button physically on the router or press the Button below soft Push Button OPIN Personal Identification Number As Client Select a setup method Push Button recommended You can either press the Push Button physically on the Start PBC router or press the Button below soft Push Button OPIN Personal Identification Number The wireless chent has been added to the network su
5. Repeater POC TE 78 E NIR TEE Sta US Pm 78 MG Me TRI AM TUTTO 79 TOZ Setn EE 79 10 3 Repeater Mode Setting rnrenrnnennnmineinmin 79 10 4 Wireless Universal Repeater ssssseeennn 80 SNS sores VAs SE cO 80 I9 S 1I Usine the WES BUTTON asooenmenendn n n dz sU pU UFU FU Uu iii 81 10 4 2 Using the Web Pag usnm 82 1043 Wireless Client RUNCHON E 86 11 Web Configuration for the WDS Mode 88 NN Sl TATUS ee 88 INN Mode aic hee 89 12 Web Configuration for the Client Mode 92 ENNIUS UU Ms 92 IC EIE n HELP 93 Lee DD NZ DE 93 TeS Y IAE INE NERO TT 93 t242 Wireless tB HL Musor bbb Pede 96 13 Appendix A FAQ eeeeeeeeeeenneeeee nennen nennen nnn nnn nn 97 English Chapter O1 1 Safety Precautions Before operating ISY Wireless Range Extender read the following precaution information carefully Leave proper space for heat dissipation to avoid damage caused by device overheating Heat dissipation holes enable the device to work normally Do not cover heat dissipation holes Keep the device away from heat outlets or high temperature places Prevent the device from direct sunlight eep the device in dry places Do not spill any liquid on this device Do not connect the device to any PC or electronic product unless our customer engineer or your broadband provider instructs you to do this because any w
6. simply connected Table Of Contents L Safety PrecautloDS ccce e eei eon ae eee etie eei eire ine 5 ZMMTEIIPM 6 AN TRING MUL Od UCHOM dom 6 Zora le EE 6 3 Mode Introduction eeeeeseeeeeeeeeeeene enne nnne nnns 7 48 115 300 M m 7 JAROT EEN 7 3 3 Wireless Universal Repeater WDS Mode H Ee EE 7 4 Hardware Description and Installation 8 4 amp 1 Hardware DescrlpEtlOPsseneantieimtisngetit ttti rtis r vtile 8 AlL Font Paneland LED Si TER 8 4 1 2 Rear Side Panel and Interface Description wissen 10 4e hardware Tros EOM E CHEN isere andara e ine e e IR NNUS TI aed Susp TE EE 1l d Before VOUT CPI DT 11 Ee IR EE 13 5 Configuring Your Computer and Wireless Connection 12 5 1 Configuring Your COMPUTE sssri IZ 5 2 Configuring Wireless CONTIBUTATIOM ss 15 6 Configuring ISY Wireless Range Extender 16 6 1 Bridge Mode Configuration sessen 17 6 2 Router Mode Configuration sessen 18 6 3 Repeater Mode Confie tati N ee 20 6 4 WS Node omie Ura Le D nomeson n aaa aaa aaa l2 6 4 1 Repeater Configuration in the WDS Mode ee 6 4 2 Central Base Station Configuration in the WDS Mode c3 6 4 3 WDS Application ENEE EENEG 24 6 5 Client Mode Configuration sininen 26 7 Web Configuration general instructions 27 FAR d e 7 1
7. Sonor or Sais Ea Number of Sites Scaned 3 Site Survey List Site Survey List id so MAC hares cham Son Ene zap MAC Address Channel Signal TWSZ 2B08 00 1F A4 90 74 5A 11 8696 WPA2 PSK AES Ralink AP111 00 A amp BB 01 23 45 9 9696 RTL867x ADSL 00 05 1D 03 04 05 6 81 None 4 2 yuanpeifeng 00 1E E3 00 35 08 6 96 3 1 2 3 WLAN 5C22 00 1E E3 96 5C 2B 1 76 WPA PSK AES TKIP test 2G 06 1F 6F 8E 87 1E 6 96 4 WLAN_Obde 00 1E E3 96 5C 2C 1 76 None 12 4 2 Wireless Client Function Choose Wireless Settings gt Wireless Client Function and the Wireless Client Function page is displayed Step 1 Click Site Survey to search for the wireless network you want to connect English Chapter 12 Wireless Client Function Je curity Qpti na Step 2 Enter encryption information of the selected wireless network Configure the client with the same security settings as the selected network Click Finish Then the client can communicate with the selected network 95 English Chapter 13 13 Appendix A FAQ 96 1 The wireless network adapter fails to search out wireless signals from ISY Wireless Range Extender When ISY Wireless Range Extender that is in the Client mode or in the Reaper mode but disconnected to the uplink AP does not support wireless client access and can be connected to through an Ethernet cable only If the problem persists causes may be t
8. address identify the target network Gateway IP Address The IP address of the next node to which packets are sent The gateway IP address must be in the same network segment as the IP address of the WAN or LAN interface of ISY Wireless Range Extender Metric The number of other routers in the user network The value ranges from 2 to 15 Usually the value of 2 or 3 leads to the best performance If the route is direct connection set Metric to 2 After finishing settings click Apply to save the settings 65 English Chapter 09 Security Options Black Sites Block Services Protection 9 5 Security Options Click Security Options and the extended navigation menu Is shown as follows Click a submenu to perform specific parameter configurations 66 Block Sites Keyword Blocking O Never O Per Schedule Always Type Keyword or Domain Name Here Add Keyword Block Sites Containing these Keywords or Domain Names Max of terms 32 Delete Keyword ffl Clear List L Allow Trusted IP Address To Visit Blocked Sites Trusted IP Address bY 9 5 1 Block Sites ISY Wireless Range Extender allows you to restrict access based on WEB addresses and WEB address keywords When a user tries accessing a restricted website a message is displayed indicating that the firewall restricts access to the website Choose Security Options gt Block Sites and the Block Sites pag
9. the devices It also lists the types and status of the open ports Note Only applications that support UPnP can use the UPnP function The functionality of UPnP requires support by the application and operating systems such as Windows ME Windows XP and Windows Vista IGMP Proxying Disable IGMP Proxying Apply 9 4 4 IGMP Proxying Click Network Application gt IGMP Proxying and the IGMP Proxying page Is displayed Enable IGMP proxying IGMP proxying enables a PC in the LAN to receive desired multicast traffic from the Internet Disable IGMP proxying if you do not need this function After finishing the setting click Apply to apply the setting 9 4 5 DMZ Server DMZ Demilitarized Zone a special network zone that is different from the external network or the internal network Servers that are allowed to access the external network such as Web and e mail connect to the DMZ The internal network is protected behind the Trust Zone interface and is not allowed any user to access Therefore the internal and DMZ Server C Default DMZ Server English Chapter 09 Apply external networks are separated which can meet user s secrecy demand Usually there are some public servers in DMZ such as Web Mail and F TP Users from the external network can access services in DMZ but they cannot obtain the company s secret information or personal information that is store
10. you can perform remote Web management for the router from the WAN Remote Management Address IP address that is used to access the router from the Internet The default is http 0 0 0 0 8080 When acces sing the router you need to enter an address in the form of the WAN IP address of the router the port number in the IE address bar For example if your external address is 10 0 0 123 and the used port number is 8080 enter 10 0 0 123 8080 in your browser Port Number The port number for accessing the router through remote Web management Allow Remote Access By Set the IP address of the computer on which remote Web management is carried out to access the router Only This Computer Only the specified IP address can access the router IP Address Range A range of IP addresses on the Internet can access the router You need to enter the starting and ending IP addresses to specify a range Everyone Everyone on the Internet can access the router After finishing settings click Apply to save the settings Schedule Days to Block v Every Day Sunday Monday Tuesday Wednesday Thursday Friday Saturday Time of day to Block use 24 hour clock All Day Start Blocking Hour Minute End Blocking Hour Minute 9 6 3 Schedules Choose Management Function gt Schedules and the Schedule page is displayed If you already set site filtering in the Block Sites page or set sevic
11. 1000 100 MAX Clients 0 12 0 CTS RTS Threshold 1 2347 2346 Long preamble v Short Gl v 10096 v Preamble Mode Guard Interval i Transmit Power Control WPS Settings Routers PIN 12345670 MeEnablewrs Disable Routers PIN Wireless Card Access List Setup Access List 7 5 3 Wireless Advanced Settings Choose Wireless Settings gt Wireless Advanced Settings and the Wireless Advanced Settings page is displayed Enable Wireless Router Radio If you disable the wireless router radio wireless devices cannot connect to the ISY Wireless Range Extender router If you do not use your wireless network for a period of time you can clear this check box and disable all wireless connectivity Fragmentation Length 256 2346 Set the threshold of fragmentati on length If the length of a packet exceeds the set value the packet is automatically fragmented into several packets The value of Fragment tion Length cannot be too small because excessive packets reduce wireless network performance The default value is 2346 English Chapter 07 DTIM 1 255 Set the interval for sending DTIM frames Beacon Interval 20 1000 The beacon interval is the frequency of sending Beacon frames Set the interval for sending Beacon frames The unit is millisecond ms The default value is 100 ms MAX Clients 0 12 Set the maximum number of clients O indicates the number of connected clients is not limited
12. 2 link 00 1F A4 91 04 50 6 3 co08508 C0 C1 C0 38 79 C0 11 Encrypt None None WPA PSK AESI TKIP WPA2 PSK AES TKIP Click Site Survey to search for the wireless network you want to connect Select a desired network Click Next 19 English Chapter 06 ireless Client Security Options Noe o v Synchronize Wireless Universal Repeater s And Uplink AP s SSID And Security Options SSID of Extended Interface Security Options none Note If you changed settings of wireless universal repeater the wireless clients connecting to your wireless universal repeater need connect to wireless universal repeater with new SSID and security options again Step 4 20 Configure the repeater with the same security option as its uplink network The following figure takes the security option of None as an example Set the encryption password and note it down Click Next Step 5 ISY Wireless Range Extender provides the wireless roaming function if you select Synchronize Wireless Universal Repeater s And Uplink AP s SSID And Security Options Otherwise manually configure the SSID and security options for the repeater Click Finish to complete setup wizard Please choose your repeater mode as follows 9 WDS Mode O Wireless Universal Repeater Mode 6 4 WDS Mode Configuration Step 2 6 4 1 Repeater Configuration in the WDS Mode Step 1 Set the three way switch on the side panel to Repeater after Step 3 I
13. Brief description of the created guest network You can create up to four guest networks A network profile contains the SSID and encryption mode whether to use the guest network and whether to broadcast SSID You can click the radio button of a profile to view detailed information or modify settings Enable Guest Network If enabled both you and visitors can connect to the network by using the SSID of the guest network Enable SSID Broadcast If enabled IS Y Wireless Range Extender broadcasts its SSID to all wireless stations Allow Guest to access My Local Network If enabled visitors using the SSID of a guest network can access not only the Internet but also the LAN of ISY Wireless Range Extender like users using the primary SSID of the network If disabled visitors using the SSID of a guest network cannot access the LAN of ISY Wireless Range Extender Enable Wireless Isolation If selected wireless clients connected to the guest network of the same SSID can access the Internet only but cannot communicate with each other Guest Wireless Network Name SSID Set the name of the guest network Security Options Refer to security option descriptions in section 8 5 2 Wireless Basic Settings After finishing settings click Apply to save the settings 38 Wireless Advanced Settings Wireless Advanced Setting Enable Wireless Router Radio Fragmentation Length 256 2346 2346 DTIM 1 255 1 Beacon Interval 20
14. CTS RTS Threshold 1 2347 Set the CTS RTS threshold If the length of a packet is greater than the specified RTS value ISY Wireless Range Extender sends an RTS frame to the destination station to negotiate After receiving an RTS frame the wireless station responds with a Clear to Send CTS frame to ISY Wireless Range Extender notifying that they can communicate with each other 39 English Chapter 07 Preamble Mode preamble especially the 802 11b High Rate DSSS PHY field 56 digits synchronized field for short preamble defines the length of the CRC correction block for communication between wireless devices Short preamble should be applied in a network with intense traffics It helps improve the efficiency of a wireless network responding to applications that have high requirement of real time such as strea ming video and voice over IP telephony Guard Interval Short Gl The interval is 400 ns When short Gl is enabled IS Y Wireless Range Extender can receive and send short frame interval packets This helps improve the transmission rate of ISY Wireless Range Extender Long Gl The interval is 800 ns Transmit Power Control Set the transmit power of the wireless network It is recommended to use the default setting of 100 Router s PIN Display the PIN to be used for the wireless client when wireless settings of the router are configured through WPS Enable WPS Functions in the WPS Setup page are available only a
15. Enter the name of your DDNS account Password Enter the password of the DDNS account After finishing the settings click Apply to apply the settings Static Routes Max of rules 32 Active Name Destination Gateway 9 4 7 Static Routes Static routing is a special type of routing that can be applied in a network to reduce the problem of routing selection and data flow overload caused by routing selection so as to improve the packets forwarding speed You can set the destination IP address subnet mask and gateway to specify a routing rule The destination IP address and subnet mask determine a destination network or host to which the router sends packets through the gateway Choose Network Application gt Static Routes and the Static Routes page is displayed Click Add to add a static routing rule Active The static routing rule can take effect only if the Active check box is selected Route Name Enter the name of the static route English Chapter 09 Static Routes Active Fj Route Name Destination IP Address IP Subnet Mask I Gateway IP Address i Metric Destination IP Address The destination address or network that you want to access This IP address cannot be in the same network segment as the IP address of the WAN or LAN interface of ISY Wireless Range Extender IP Subnet Mask This IP subnet mask together with the destination IP
16. Extender including system information LAN port status and wireless repeating information Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date LAN Port MAC Address IP Address IP Subnet Mask Wireless Repeating Base Station Address Connect Status English Chapter 11 V1 0 0 V1 0 0 Wireless Router Repeater Mode 1971 01 01 09 02 07 00 1E E3 5B DE 22 192 168 100 254 255 255 255 0 Disconnected 87 English Chapter 11 WDS Function Repeater Mode Settings a Disable Wireless Clients Association recedet x West LE HOO MU Wireless MAC ofthis router 00 1E E3 42 15 35 Please choose your repeater mode as follows keieren aceasta WDS Mode Repeater IP Address O Wireless Universal Repeater Mode Basic Station MAC Address Aeey J 11 2 Setup Wizard Disable Wireless Clients Association If selected the repeater does For settings refer to section 6 4 WDS Mode Configuration not transmit any signals to clients that are connected to it Generally clear this check box Generally select this check box 11 3 Mode Setting Security Options Set the security encryption mode for the repeater It Click Mode Settings and the Mode Settings page is displayed is recommended to configure the repeater with the same encryption Select WDS Mode Note that WDS function cannot be used if the channel Ee SCT iS INC
17. For settings refer to section 6 5 Client Mode Configuration displayed This page displays information of wireless devices connected to ISY 12 3 Network Settings Wireless Range Extender including the IP adress and MAC address of Click Wired Network Settings and the extended navigation menu is each device shown asfollows Click a submenu to perform specific parameter configurations 92 12 4 1 WPS Setup WPS refers to Wi Fi Protected Setup You can use WPS to establish wireless connection in a quick and secure way if the uplink AP or terminal for example the network adapter has the WPS function It is suggested to first configure wireless encryption for the uplink AP If you change the wireless encryption mode after having establishing wireless connection using WPS you must use WPS to establish wireless connection again Note that if the wireless client does not support WPS you must manually configure the wireless client such as SSID security mode and password to make it have the same SSID and wireless security settings as the router The following describes how to configure WPS for the Client mode Using the WPS Button In the Client mode ISY Wireless Range Extender can perform WPS encrypted connection to either the uplink AP or the repeater Using the Web Page You can perform WPS settings using the Web page for configuration Choose Wireless Settings gt WPS Setup to display the WPS Setup page PBC mode St
18. ISY Wireless Range Extender wireless router 1 x Ethernet cable 1 x Quick Installation Guide 1 x Warranty Card 3 Mode Introduction 3 1 Bridge Mode In the Bridge mode ISY Wireless Range Extender works as a wireless router to achieve wireless connection for the wired LAN 3 2 Router Mode In the Router mode ISY Wireless Range Extender works as a domestic gateway 3 3 Wireless Universal Repeater WDS Mode In the Wireless Universal Repeater WDS mode ISY Wireless Range Extender expands wireless coverage of the existing AP Computers can connect to ISY Wireless Range Extender in either a wired or wireless way 3 4 Client Mode In the Client mode ISY Wireless Range Extender provides Internet access for a set top box or a computer with a network adapter English Chapter 03 English Chapter 04 4 Hardware Description and Installation Front Panel and LED Status TOR POWER GREEN THE DEVICE IS WORKING NORMALLY 4 1 1 Front Panel and LED Status There are 4 LED indicators on the front panel of ISY Wireless Range Extender By observing their status you can check whether the device runs normally RED On The system is in the process of Self inspection or fails the self inspection Or it is in the process of software upgrade English Chapter 04 NON COMMUNICATION STATE NINE ii RTI indicator keeps on for 5 minutes after WPS Wi Fi Protec The Ethernet port is in the commu ted Setup con
19. RMI SUN ee DI ER is set to Auto EE 88 Repeater IP Address Set the repeater s IP address different from the wireless basic station and other repeaters to avoid IP address conflict We suggest setting IP addresses of the same network segment for the wireless basic station and repeaters Basic Station MAC Address Enter the MAC address of the wireless basic station After finishing settings click Apply to save the settings For WDS application description refer to section 6 4 3 WDS Application Security Options Security Options Security Options WPA P SK PassPhrase English Chapter 11 WPA PSK TKIP 8 63 characters or 64 hex digits WPA PSK TKIP WPA PSK Preshared key Wi Fi protection access TKIP Temporal Key Integrity Protocol Note that the 802 1 1n mode does not support the TKIP algorithm PassPhrase Enter 8 63 ASCII characters or 64 hexadecimal digits 89 English Chapter 11 Security Options Security Options WPA2 PSK AES v Security Options WPA2 P SK PassPhrase 8 63 characters or 64 hex digits WPA2 PSK AES WPA2 PSK Preshared key Wi Fi protection access version 2 AES Advanced Encryption Standard PassPhrase Enter 8 63 ASCII characters or 64 hexadecimal digits Note After you complete configuring wireless settings for ISY Wireless Range Extender only hosts that have the same wireless settings for example the SSID
20. Using Address Reservation Step 2 Select one item from Address Reservation Table or enter the IP address in the IP Address field to assign to the computer or server Choose an IP address from the IP address pool that you have specified for example 192 168 100 x Enter the MAC address and device name of the computer or server Step 3 Click Add to add a new item into Address Reservation When you specify areserved IP address for a computer in the LAN the computer always receives the same IP address each time it accesses the router s DHCP server Reserved IP addresses should be assigned to computers or servers that require permanent IP settings To reserve an IP address Step 4 Click Apply to save the Settings Step 1 Click Add to enter the Address Reservation page 31 English Chapter 07 Wireless Basic Settings Region Selection Region r Wireless Network Wireless Settings V Enable SSID Broadcast Ot l C Enable Wireless Isolation Wireless Basic Settings sad Podee o0 Mode Mixed 802 11bigin Guest Network Es Auto BI Wireless Advanced Settings UT Max Transmission Rate Auto Mbps WPS Setup Security Options Security Options None J 7 5 Wireless Settings 7 5 1 Wireless Basic Settings Click Wireless Settings and the extended navigation menu is shown as Choose Wireless Settings gt Wireless Basic Settings and the Wireless follows Click a submenu to per
21. Wireless Network Name SSID Region Wireless Channel 802 11 Mode Wireless Radio Broadcast Name Wireless Isolation Wi Fi Protected Setup WPS Wireless Security Mode V1 0 0 V1 0 0 Wireless Router Bridge Mode 1971 01 01 10 32 45 00 1E E3 5B DE 23 192 168 100 254 255 255 255 0 PocketAP 001 China Auto Mixed 802 11b g n Enabled ON OFF ON None 27 English Chapter 07 Clients List Mode Settings Wired Devices Please choose your mode as follows IP Address MAC Address Device Name Bridge Mode E In this mode the port is used as a lan port Wireless Devices Wireless intruders also show up here You can login web by either connecting you wired network LLL View Wireless Basic Config _ d P Address MAC Adress Devico Mame at mehr rap RIS SAADES n 1 192 168 100 12 00 26 F2 4F AC 60 unknown O Router Mode J 7 1 2 Clients List 7 2 Setup Wizard For settings refer to section 6 1 Bridge Mode Configuration Choose Running Status gt Clients List and the Clients List page is displayed 7 3 Mode Setting Click Mode Settings and the Mode Settings page is displayed This page displays information of computers connected to the router Bridge Mode The interface on its case is an LAN interface Users can including the IP adress and MAC address of each computer connect ISY Wireless Range Extender and the PC using an RJ45 cable or a wireless network card Router Mode Computers can connect to ISY
22. as ISY Wireless Range Extender can connect to ISY Wireless Range Extender If you configure security settings for ISY Wireless Range Extender hosts must have the same security settings for example the password as ISY Wireless Range Extender in order to connect to ISY Wireless Range Extender 90 12 Web Configuration for the Client Mode 12 1 Router Status Choose Running Status gt Router Status and the Router Status page is displayed In this page you can view information about the current running status of ISY Wireless Range Extender including system information LAN port status and wireless client status English Chapter 12 Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date LAN Port MAC Address IP Address IP Subnet Mask Wireless Client Wireless Network Selected Name SSID Wireless Channel Wi Fi Protected Setup WPS Wireless Security Mode Connect Status v1 0 0 v1 0 0 Wireless Router Client Mode 1971 01 01 08 05 11 00 1E E3 5B DE 22 192 168 100 254 255 255 255 0 Auto ON None Disconnected g1 English Chapter 12 F Clients List e Network Settings Wired Devices IP Address MAC Address Device Name 1 192 168 100 123 00 19 E0 23 C5 38 unknown D LAN Interface Settings 3 DHCP Server J 12 1 1 Clients List 12 2 Setup Wizard Choose Running Status gt Clients List and the Clients List page is
23. case you forget your password Then change it again after you have saved the configuration file If you forget the password you will need to reset the configuration to factory defaults Restore he Backup and Restore options in the Backup Settings page let you save and retrieve a file containing your router s configuration set tings Click Browse to select the configuration file restored in your computer and click Restore to load the file to the router Erase Under some circumstances for example if you move the router to a different network or if you have forgotten the password you might want to erase the configuration and restore the factory default settings Click Erase to restore the factory default settings of the router This operation has the same effect as pressing the Reset button on the side panel for 3 6 seconds 1 English Chapter 09 Remote Management C Turn Remote Management On Remote Management Address http 0 0 0 0 8080 3 Port Number Allow Remote Access By Only This Computer IP Address Range Everyone 9 6 2 Remote Management The remote management function allows you to configure the router from the WAN through the Web browser In this way you can manage the router on a remote host Choose Management Function gt Remote Management and the Remote Management page is displayed 72 Turn Remote Management On If selected
24. provided by the ISP Password Enter the password for PPPoE dialup provided by the ISP Service Name If several PPPoE servers are available specify one in this field Connection Mode Always On If you select it the system automatically establishes a connection If ISY Wireless Range Extender is disconnected from the network because of external factors when you are using the Internet access service the system attempts connection in an 54 interval of the specified time for example LO seconds until the connection is established If you pay for Internet access monthly we recommend you to use this connection mode Dial On Demand If you select it the system automatically establi shes a connection when a network access request from the LAN is received If no network access request is sent from the LAN within the specified time of Idle Timeout the system automatically interrupts the connection If you pay for Internet access by time you are recommended to use this connection mode which effectively saves the expense of Internet access Manually Connect f you select it you need to manually set dialup connection after startup Idle Timeout f the system does not detect any Internet access behavior within the specified time of Idle Timeout the system interrupts the Internet connection Domain Name Server DNS Address Select Use These DNS Servers if you know that your ISP does not automatically transmit
25. rules 32 Service Type User Defined Service Name Add Edit Delete BEES Only This IP Address Block Service Rules Table White List Max of rules 32 OP Address Range Service Name Add Edit Delete 9 All IP Address Hs e 9 5 2 Block Services To specify a service for blocking ISY Wireless Range Extender allows you to block the use of certain Step 1 Select Per Schedule or Always to enable keyword blocking To Internet services by computers on your network block by schedule be sure to specify a time period in the Choose Security Options gt Block Services and the Block Services page is Schedule page For more information about scheduling refer displayed to section 8 8 3 Schedules Black List Indicates to prevent service that complies with the rule in the Block Service Rules Table Black List area from being used White List Indicates to allow only service that complies with the rule in the Block Service Rules Table White List area to be available for use Step 2 Click Add to specify a service for blocking The Block Services Setup page is displayed 68 Step 3 Set the parameters in this page Service Type Select a service type If your desired type is not in the list select User defined Then you need to select the protocol enter the service name and specify the port range For services that exist in the drop down lis
26. the key board Encryption Strength The encryption strength determines the length of the key If Encryption Strength is set to 64 bits set the key to 10 hexadeci mal digits or 5 ASCII characters If Encryption Strength is set to 128 bits set the key to 26 hexadeci mal digits or 13 ASCII characters Key 1 2 3 4 Set the key based on the selected encryption type and encryption strength English Chapter 07 35 English Chapter 07 Security Options Security Options Security Options WPA PSK TKIP v Security Options WPA2 PSK AES Security Options WPA P SK Security Options WPA2 P SK PassPhrase 8 63 characters or 64 hex digits PassPhrase 8 63 characters or 64 hex digits J WPA PSK TKIP or WPA2 PSK TKIP WPA PSK AES or WPA2 PSK AES WPA PSK Preshared key Wi Fi protection access WPA2 PSK Preshared WPA PSK Preshared key Wi Fi protection access key Wi Fi protection access version 2 TKIP Temporal Key Integrity WPA2 PSK Preshared key Wi Fi protection access version 2 Protocol AES Advanced Encryption Standard Note that the 802 11n mode does not support the TKIP algorithm PassPhrase Enter 8 63 ASCII characters or 64 hexadecimal digits PassPhrase Enter 8 63 ASCII characters or 64 hexadecimal digits 36 English Chapter 07 Guest Network Network Profiles Scheme SSID Security Apply SSID Broadcast 1 PocketAP 002 None NO YES 2 PocketAP
27. 003 None NO YES 3 PocketAP 004 None NO YES Security Options 4 PocketAP 005 None NO YES p Wireless Settings Profile 1 Security Options WPA PSK WPA2 PSK TKIPJ AES Beci Setting Security Options WPA P SK WPA2 P SK Enable SSID Broadcast C Allow Guestto access My Local Network PassPhrase 8 63 characters or 64 hex digits C Enable Wireless Isolation Guest Wireless Network Name SSID PocetaP 002 Security Options Profile 1 Security Options None E WPA PSK WPA2 PSK TKIP AES 7 5 2 Guest Network It allows the client to use either WPA PSK TKIP AES or WPA2 If you do not want visitors to know your wireless security key you can PSK TKIP AES use the guest network to allow them to use your Internet without knowing your wireless connection password PassPhrase Enter 8 63 ASCII characters or 64 hexadecimal digits Choose Wireless Settings gt Guest Network and the Guest Network page Note After you complete configuring wireless settings for ISY Wireless is displayed Range Extender onlyhosts that have the same wireless settings for example the SSID as ISY Wireless Range Extender can connect to it If you configure security settings for ISY Wireless Range Extender hosts must have the same security settings for example the password as IS Y Wireless Range Extender in order to connect to ISY Wireless Range Extender 3 English Chapter 07 Network Profiles
28. 1 Step 2 WDS Mode Set ISY Wireless Range Extender to the Router mode Choose Wireless Settings gt WDS Function select Enable WDS Function and enter the MAC address of the Repeater Note One basic station can connect to a maximum of 4 repeaters Step 1 t 2 y Step 2 Configure the three routers in this way 6 4 3 WDS Application The following figure shows a wireless network for Humans Resource Department marked as A in the figure Finance Department marked as B and Marketing Department marked as C in an enterprise If the three departments share one wireless router signals searched by computers may be rather weak or even no signals are available However if each of the three departments uses a wireless router we can use WDS to connect the three routers to provide perfect wireless coverage for the whole areas English Chapter 06 Configure the three routers in this way Wireless router B functions as the wireless basic station wireless routers A and C connect to wireless router B by using WDS 1 Configuring wireless router B as the wireless basic station Log in to the Web management page of wireless router B ChooseWireless Settings gt Wireless Basic Settings and set the SSID channel and wireless encryption information Write down the SSID channel and wireless encryption information that are required when you are configuring wirelss router A and C Choose Wireless S
29. 1 Router StatUS NN ca DONORS cal Tree c9 Pes SetU NIZA fc UTE c9 KH Ke EU NN CM 29 Tee INET OMG VEU HIM OS RN T 30 7 4 1 LAN Interface Settings EEN 30 7 4 2 DHCP SEL UCT a 7 4 2 1 Using ine Router as a DHCP Sef VEF srra 31 7 4 2 2 Using Address Reservationer Be TZ WITeISSS SET Lu 33 Tol wilBssD35l SLT IFIB S annae b DRUNAHSMSMAMOMOHN HAN M HAMM UU 33 Fh ARN cru oT 38 7 5 3 Wireless Advanced Settings 40 Duc gels H 43 7 9 As USING the Web Pag eenegen 43 4o Management EIER ee 45 Ft MT el Ch UA un acc E a ON a 45 7 6 2 Reboot Ui MR EPOR 47 703 Set ESS WONG Eege eet 47 ZO e 48 Table Of Contents 8 Web Configuration for the Bridge Mode 49 NN og Tr ae et et 49 helles e e u 50 9 Web Configuration for the Router Mode 5 g EE Sch 9 2 WAN Bn E 53 SES EUR M EFIE E 58 94 NetWork ADDIICRIDI septa p p tutu d a rh ccrta re uta 59 94 1 Port OC te EE 59 JAZ PO INEC UU SNNT ERES 61 GE a E 63 gA TE e 64 PZ SU ON e PE 64 gA E OVC ONS eee err E ne Cn RN TAN AN a 65 g4 7 SUC EE 66 9 5 SEDET Nicaea taeda aloe a UR uhren E 6 S IM s o8 e ILS CS ND NN m 67 EEN 69 GR I EE Zl 96Management FUNCION E 72 961 e len Le 72 JOA Remot Manac MEN ROTE 73 ELS SEUES ap a een ncn 74 964 SNIP 9 75 DOT SUO eT aana RA 76 EE EE a E 76 10 Web Configuration for the Wireless Universal
30. DNS addresses to the router during login And enter the IP address of your ISP s primary DNS server Enter a secondary DNS server address if available MTU Size Set the maximum transmission unit The default value is recommended Router MAC Address See descriptions on setting Router MAC Address for DHCP After finishing settings click Apply to save the settings WAN Interface Settings Does your Internet Connection Require A Login Yes O No Internet Service Provider Em ei Login Password Connection Mode Idle Timeout In minutes e Always On My IP Address i Subnet Mask Server Address Gateway IP Address lE XE AE Domain Name Server DNS Address 9 Get Automatically From ISP O Use These DNS Servers MTU Size 616 1450 bytes 1450 Device MAC Address Use Default Address Use Computer MAC Address O Use This MAC Address 4 PPTP If the ISP provides the user name and password for PPTP dialup select PPTP Login Enter the user name for PPTP dialup provided by the ISP Password Enter the password for PPTP dialup provided by the ISP Connection Mode Always On If you select it the system automatically establishes a connection If ISY Wireless Range Extender is disconnected from the network because of external factors when you are using the Internet access service the system attempts connection in an interval of the specif
31. SY Wireless Range Extender is powered on Log in to the configuration page after the system is started English Chapter 06 Repeater IP Address Basic Station MAC Address Click Setup Wizard in the navigation bar on the left pane of the page Select WDS Mode and click Next Note The WDS function cannot be used if the channel is set to Auto Manually set all WDS devices to the same channel Set the IP address of the LAN port of the repeater and enter the MACaddress of the basic station Click Next cl English Chapter 06 Setup Wizard Step3 WEP can and should be used to protect WDS communication Auto channel can not b e used Other Wireless Settings Name SSID Pocket Repeater Channel 7 Security Options None Ameca WDS Function Enable WDS Function Disable Wireless Clients Association Wireless MAC ofthis router 00 1E E3 42 15 35 Wireless Basic Station Repeater MAC Address 1 Repeater MAC Address 2 Repeater MAC Address 3 Repeater MAC Address 4 Step 4 Set the SSID channel and security encryption for the 22 repeater The channel cannot be set to Auto It is recommen ded to configure the repeater with the same security option as its base station Set the encryption password and note it down Click Finish to complete the settings 6 4 2 Central Base Station Configuration in the Step
32. WLANs Geschwindigkeit Bis zu 300Mbit s Frequenzband 2 4 GHz Range extender wireless Estendi la copertura della tua rete Wi Fi esistente Velocit Fino a 300 Mbps Banda 2 4 GHz 2UOKEUN err kraong eup Aerac ac ppiarou OIKTUOU ETEKTEIVETE TNV kaAuum rou UMIOTAUEVOU Wi Fi OIKTUOU GAG Tax rnra Ewes 300 Mbps Zwvn 2 4 GHzao pyaro lkruo B WiFi Range Extender Expande la cobertura de su red WiFi Velocidad Hasta 300 Mbps Banda 2 4GHz Amplificateur de signal sans fil tendez la port e de votre r seau wi fi Vitesse Jusqu 300 Mbps Bande 2 4 GHz Vezet k n lk li h l zatb v t modul Megl v Wi Fi h l zat hat t vols g nak novel se Sebess g Maximum 300 Mbit s S v 2 4 GHzrendelkez k sz l k Imtron GmbH WankelstraBe 5 D 85046 Ingolstadt Draadloze range extender Vergroot het bereik van uw huidige Wi Fi netwerk Snelheid Tot 300 Mbps Frequentieband 2 4 GHz Urzadzenie rozszerzajace zasieg sieci bezprzewodowej Do poszerzania zasiegu istniejace sieci Wi Fi Predko Do 300 Mb s Pasmo 2 4 GHz Range Extender sem fios Expande a rea de cobertura da rede Wi Fi existente Velocidade At 300 Mbps Banda 2 4 Ghz YcuAMTeAb CArHaAa 6ecnpoBOAHOM CeTM YBeAuubre nokperrue CBOeN Wi Fi ceru CKopocrb Ao 300 M6ur cf1oAoca 2 4 ffu Tr dl s Range Extender Ut ka t ckningen for ditt nuvarande tr dl sa n tverk Hastighet Upp till 300 Mbit s Band 2 4 GHz Kablosuz Erim Genisletici
33. Wireless Range Extender in a wireless way only 28 Network Settings LAN Interface Settings DHCP Server English Chapter 07 7 4 Network Settings Click LAN Interface Settings and the extended navigation menu is shown as follows Click a submenu to perform specific parameter configurations LAN Interface Settings LAN TCP IP Setup IP Address 192 168 100 254 IP Subnet Mask 255 255 255 0 7 4 1 LAN Interface Settings Choose Network Settings gt LAN Interface Settings and the LAN Interface Settings page is displayed You can modify the IP address and IP subnet mask of the LAN port as required Note f you change the default IP address you must use the new IP address tolog in to the Web configuration page of the router and the default gateway of all hosts in the LAN must be set to the new IP address for Internet access The subnet mask of all hosts in the LAN must be the same as the subnet mask specified in the LAN Interface Settings page 29 English Chapter 07 DHCP Server C Use Router as DHCP Server Starting IP Address Ending IP Address DHCP Lease Time 1 160 hours Address Reservation IP Address Device Name MAC Address 7 4 2 DHCP Server Choose Network Settings gt DHCP Server and the DHCP Server page is displayed DHCP refers to Dynamic Host Configurati
34. address of the router Generally select Use Default Address If the ISP requires MAC address authentication Select Use Computer MAC Address or Use This MAC Address If you select Use Computer MAC Address the MAC address of the current computer serves as the MAC address of the router If you select Use This MAC Address you need to enter the MAC address of another computer The format of an MAC address is JOCXX XX XX XX XX After finishing settings click Apply to save the settings WAN Interface Settings Does your Internet Connection Require A Login O Yes No Account Name If Required Internet IP Address Get Dynamically From ISP 9 Use Static IP Address EE IP Address IP Subnet Mask Gateway IP Address L Domain Name Server DNS Address Get Automatically From ISP Use These DNS Servers Primary DNS Secondary DNS MTU Setting MTU Size 616 1500 bytes 1500 Device MAC Address Use Default Address Use Computer MAC Address O Use This MAC Address 2 Static IP If the ISP provides the IP address subnet mask and information about the gateway and DNS server select Static IP Contact your ISP if you do not know the information Account Name he account name is provided by your ISP If the ISP does not provide it you can leave the item blank IP Address Enter the WAN IP address provided by the ISP The parame te
35. atus page is displayed In this page you can view information about the current running status of ISY Wireless Range Extender including system information LAN port status wireless client information and wireless universal repeater status English Chapter 10 Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date LAN Port MAC Address IP Address IP Subnet Mask Wireless Client Wireless Network Selected Name SSID Wireless Channel Wi Fi Protected Setup WPS Wireless Security Mode Connect Status Wireless Universal Repeater SSID of Extended Interface Wireless Security Mode V1 0 0 V1 0 0 Wireless Router Repeater Mode 1971 01 01 08 18 34 00 1E E3 5B DE 22 192 168 100 254 255 255 255 0 Auto ON None Disconnected Pocket Repeater None fj English Chapter 10 Clients List Wired Devices IP Address MAC Address 1 192 168 100 123 00 19 E0 23 C5 38 Wireless Devices Wireless intruders also show up here IP Address MAC Address Device Name unknown Device Name 10 1 2 Clients List Choose Running Status gt Clients List and the Clients List page is displayed This page displays information of devices connected to ISY Wireless Range Extender including the IP adress device name and MAC address of each device 78 Repeater Mode Settings There are two modes to expand your wireless network of the Repeare
36. aving your configuration file change the administrator password to the default admin in case you forget your password Then change it again after you have saved the configuration file If you forget the password you will need to reset the configuration to factory defaults Restore The Backup and Restore options in the Backup Settings page let you save and retrieve a file containing your router s configuration settings Click Browse to select the configuration file restored in your computer and click Restore to load the file to the router Erase Under some circumstances for example if you move the router to a different network or if you have forgotten the password you might want to erase the configuration and restore the factory default settings Click Erase to restore the factory default settings of the router This operation has the same effect as pressing the Reset button on the side panel for 3 6 seconds English Chapter 07 45 English Chapter 07 Set Password Reboot Device cio ca Old Password eec Set Password Repeat New Password Apply J 7 6 2 Reboot Router 7 6 3 Set Password Choose Management Function gt Reboot Router and the Reboot Router Choose Management Function gt Set Password and the Set Password page is displayed Click Reboot to reboot the router After the router is rebooted the system jumps to the login page page is displayed In this page
37. band DHCP Static IP and PPPoE Perform configura tions according to the broadband type you are using 17 English Chapter 06 PPPoE detected Successtut detected the type of Internet commection you have Wireless Settings v Enable Weetess Oewce Radio Name SSID ou can use the default SSID Mame S8ID NIIT E gt owever we suggest modifying Password Setting Login Enter the account name and Ze SE a ad n e Service Name It required Bram Options 7 1 Nene E Si denen provided mode and password Get Automaticaty From ISP your ISP does not provide it elect Get Automatically From ISP O Use These ONS Servers et the wireless e ption Primary DNS Secondary ONS Parameter configuration for PPPoE Step 5 Click Next Set the SSID and password and note them down Click Finish to complete the settings 18 Please choose your repeater mode as follows O WDS Mode Wireless Universal Repeater Mode 6 3 Repeater Mode Configuration Step 3 Step 1 Step 2 Set the three way switch on the side panel to Repeater after ISY Wireless Range Extender is powered on Log in to the configuration page after the system is started Click Setup Wizard in the navigation bar on the left pane of the page Select Wireless Universal Repeater Mode and click Next Number of Sites Scaned 35 English Chapter 06 Site Survey List SSID BSSID Channel 1 Net 001 00 19 87 05 11 68 13
38. ccessfully Chet OK 15 go back to Re Wi fi Protected Setup page Step 2 Click the PIN button on the network adapter within 2 As aclient minutes to start WPS connection After WPS connection is established the fo lowing page is displayed indicating that You can perform WPS settings using the Web page for configuration the WPS connection is completed Choose Wireless Settings gt WPS to display the WPS page PBC mode Step 1 Select Push Button and click Start PBC WPS encrypted connection starts 83 English Chapter 10 The wireless chent has been added to the network successfully Ch OK 1 go back to The Wi fi Protected Setup page Step 2 Start the WPS PBC process After WPS connection is estab lished the following page is displayed indicating that the WPS connection is completed 84 WPS Setup As AP Select a setup method Push Button recommended You can either press the Push Button physically on the router or press the Button below soft Push Button PIN Personal Identification Number As Client Select a setup method Push Button recommended If your Adapter supports WPS please click on Generate a eei te tie HAM Cir pi 2345670 PIN mode Step 1 Select PIN click Generate New PIN and click Start PIN to start WPS connection Step 2 Start the WPS PBC process within 2 minutes to start WPS connection After WPS connection is established a page is displayed indicat
39. ct Network Drive Co nN N e C T O B Create Shortcut Delete Rename Properties Step 1 Right click the icon of My Network Places and choose Properties to display the Network Connections window 5 1 Configuring Your Computer The following takes Windows XP as an example Do as follows to manually set the network adapter ll English Chapter 05 Local Area Connection Properties Gerd Advanced Connect gei NE rodon Ak 10 100 meg ged Cre View Available Wireless Networks Thn cgnnechon uses the lobong fore Status vi Bl Oen tor Microsoft Networks V BF de and Prete Shan for Mecrosolt Networks Repair v Be Packet Schedin e z Bridge Connections S D enphon Create Shortcut Trseamertion Control Protecol internet Protocol The detsut wade crea network protocol that pondet comus Delet amis drretin nfencornecirid networks Rename Zeen icon in Fe Mee Me when connected v Mett me when thes Connection has im ed or no connectivity Properties o JL ces Step 2 Right click the icon of a network interface card or wireless Step 3 Double click Internet Protocol TCP IP networkadapter and choose Properties Note In the Client mode computers can connect to ISY Wireless Range Exten der through an Ethernet cable only l2 English Chapter 05 Internet Protocol TCP IP Properties PR General You can get IP settings assigned automatically if your network supports t
40. d Choose Management Function gt Set Password and the Set Password page is displayed In this page you can change the login password and set the page timeout time Note For security it is strongly recommended to change the default password of the administrator If you forget the password you can restore the router to the default settings The default password is admin 75 English Chapter 09 Router Upgrade Locate and select the upgrade file from your hard disk Clear Config 9 6 7 Router Upgrade Choose Management Function gt Router Upgrade and the Router Upgrade page is displayed Upgrade the software of the router in the following steps Step 1 Click Browse to navigate to the latest software Step 2 Select the correct upgrade file If you select Clear Config the router restores to the default settings after upgrade If you do not select it the current settings remain Step 3 Click Upload to start upgrade 6 After the upgrade is completed the router automatically reboots Note After the software upgrade ISY Wireless Range Extender returns to the factory default settings In case of losing the previous configurati on information please save settings before updating the software Do not power off the router during the upgrade 10 Web Configuration for the Wireless Universal Repeater Mode 10 1 Router Status Choose Running Status gt Router Status and the Router St
41. d on the internal network Even though servers in the DMZ are network displayed damaged it does not cause secret information loss on the internal Choose Network Application DMZ Server and the DMZ Server page is Default DMZ Server Enter the IP address of a PC that serves as the DMZ Server 63 English Chapter 09 Dynamic DNS Use a Dynamic DNS Service dyndns org v myhostname Service Provider Host Name User Name User Password s9900009 9 4 6 Dynamic DNS Dynamic domain name resolution DDNS is mainly used to achieve resolution between fixed domain names and dynamic IP addresses For a user that uses a dynamic IP address after the user obtains a new IP address in the Internet access the dynamic domain name software installed in the host sends the IP address to the DDNS server provided by the DDNS service provider and updates the domain name resolution database When another user on the Internet tries accessing the domain name the dynamic domain name resolution server returns the correct IP address Choose Network Application gt Dynamic DNS and the Dynamic DNS page is displayed 64 Use a Dynamic DNS Service If you have registered with a DDNS service provider select Use a Dynamic DNS Service Service Provider Select your DDNS service provider Host Name Enter the host name or domain name provided by your DDNS Service provider User Name
42. e filtering in the Block Services page you can set a schedule to specify the time and mode of restricting Internet access Days to Block Select days on which you want to apply blocking by selecting the appropriate check boxes Select Every Day to select the check boxes for all days Time of Day to Block All Day To perform 24 hour blocking Blocking If you want to restrict access in a fixed Start Blocking End English Chapter 09 period during the days you specify enter the start and end time in 24 hour format After finishing settings click Apply to save the settings 3 English Chapter 09 SNTP Time Setting Oo Automatically synchronize with Internet time servers First NTP time server 0 72 145 4 Si Second NTP time server Time Configuration Current Router Time 1971 01 01 13 03 51 Time Zone Enable Daylight Saving Daylight Saving Offset Daylight Saving Dates Time interval must be greater Start than the days of start month End 9 6 4 SNTP Choose Management Function gt SNTP and the SNTP page is displayed SNIP refers to Simple Network Time Protocol In this page you can set time information of your router It is strongly recommended to set the correct time on the router first This ensures proper functioning of log site blocking and schedule because their time settings are based on time information in this page Automatically synchronize with Internet time serve
43. e is dis played To block access to Internet sites Step 1 Step 2 Select Per Schedule or Always to enable keyword blocking To block by schedule be sure to specify a time period in the Schedule page For more information about scheduling refer to section 8 8 3 Schedules Enter keywords or domain names that you want to block in the keyword field and click Add Keyword The keyword or domain name then appears in the Block Sites Containing these Keywords or Domain Names list Keyword application examples If the keyword XXX is specified the URL ww w aabbcc com xxx html is blocked If the keyword com is specified only websites with other domain suffixes such as edu org or gov can be accessed Step 3 Step 4 You can specify one trusted user which is a computer that has no restriction in network access To specify a trusted user enter the computer s IP address in the Trusted IP Address field and select the Allow Irusted IP Address To Visit Blocked Sites check box Since the trusted user is identified by IP address you should configure thatcomputer with a fixed IP address Click Apply to save the settings English Chapter 09 6 English Chapter 09 Block Services Block Services Setup Service Type User Defined V Never Protocol TCP v Per Schedule ULI P Always Starting Port a 765535 Block Service Rules Table Black List Ending Port a 65535 Max of
44. ep 1 Select Push Button and click Start PBC WPS encrypted connectionstarts English Chapter 12 93 English Chapter 12 WPS Setup As Client Select a setup method Push Button recommended You can either press the Push Button physically on the Start PBC router or press the Button below soft Push Button OPIN Personal Identification Number Success The wireless chont has been added to the network successfully Che Ok 1 go bac b The Wi Fi Protected Setup page Step 2 Start the WPS PBC process After WPS connection is estab lished the following page is displayed indicating that the WPS connection is completed 94 WPS Setup As Client Select a setup method Push Button recommended 9 PIN Personal Identification Number If your Adapter supports WPS please click on Generate a Gernerate New PIN client Security Pin to input on the AP Router Gateway and put the generated client PIN number here Clients PIN 12345670 The wireless Cent has been added to fe network successfully Ch OK 15 go back 00 he Wi Fi Protected Setup page PIN mode Step 1 Select PIN click Generate New PIN and click Start PIN to start WPS connection Step 2 Start the WPS PBC process within 2 minutes to start WPS connection After WPS connection is established the following page is displayed indicating that the WPS connec tion is completed Wireless Client Function Wireless Client Function
45. er Any v Service Type TCP v Triggering Starting Port 1 65535 Triggering Ending Port 1765535 Required Inbound Connection Connection Type TCP v Starting Port 1 65535 Ending Port 1 65535 a COTO _F_ c jAp pRGROOOHESE oo 8 Enable Port Triggering If Enable Port Triggering box is not checked all port triggering function will be disabled Port Triggering Timeout The timeout value controls the inactive timer at the specified ingress port Upon timeout of the inactive timer the ingress port is disabled Click the Add Service button and the Port Triggering Services page is displayed Service Name Enter a service name Service User Any Allow everybody in the user network to use the service Single address Enter the IP address of the network adapter on the PC Then the service is applied only on the specific network adapter of the PC Service Type The protocol used at the triggering port You can select TCP UDP TCP or UDP Triggering Starting Port The first port to which an application sends a connection request All relevant ports can be open only after connection is established at this starting port Otherwise other relevant ports are not open Triggering Ending Port Set the end port of the triggering port range Starting Port he starting port of the port range Ending Port The ending port of the port range After finishing settings click Apply to add a port triggering ru
46. er encryption information of the selected wireless Step 2 network Click Finish to complete the settings 6 5 Client Mode Configuration Step 1 Click Setup Wizard in the navigation bar on the left pane of the page Click Site Survey to search for the wireless network you want to connect 25 English Chapter 07 Web Configuration general instructions NOTE This chapter explains the web configuration of the ISY Wireless Range Extender in general Some options explained in this chapter may not be available in all operating modes If you are looking for information on something which is not listed in the General chapter please refer to the chapter for the specific operating mode Repeater Router Bridge etc you are using 26 Running Status Router Status Clients List 7 1 Running Status Click Running Status and the extended navigation menu is shown as follows Click the submenu to enter a specific configuration page 7 1 1 Router Status Choose Running Status gt Router Status and wwwthe Router Status page is displayed In this page you can view information about the current running status of ISY Wireless Range Extender including system information LAN port status and wireless network status English Chapter 07 Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date LAN Port MAC Address IP Address IP Subnet Mask Wireless Port
47. ettings gt WDS Function and enable the WDS function Enter MAC addresses of repeaters that is wireless routers A and C in this example Click Apply to save the settings 23 English Chapter 06 2 Configuring wireless router A Do as follows to establish WDS connection between wireless routers A and B Step 1 Step 2 Step 3 Set wireless router A with the same channel and encryption informationas wireless router B Choose Wireless Settings WDS Function and enable the WDS function Set the IP address of wireless router B different from that of wireless router B to avoid IP address conflict for example change the IP address to 192 168 100 20 in the LAN Interface Settings page and log in to the Web management page again Enter the MAC address of the wireless basic station 2 Configuring wireless router A Click Apply to save the settings Then WDS connection is established between wireless routers A and B 3 Configuring wireless router C Configure wireless router C in the same way as wireless router A Note that the IP address of the LAN interface must be changed to an IP address that does not conflict with IP addresses of existing computers or devices in the network 24 English Chapter 06 Wireless Client Function Wireless Client Function MAC Address Channel Signal 00 A4 BB 01 23 45 9 9696 00 1E E3 00 35 08 6 9696 06 1F 6F 8E 87 1E 6 96 Ralink_AP111 yuanpeifeng test_2G Ent
48. form specific parameter configurations BasicSettings page is displayed 32 English Region Select the region where you are located Enable SSID Broadcast f enabled the router broadcasts its SSID in the wireless network Wireless clients can scan the SSID and access the wireless network under the SSID Enable Wireless Isolation If selected wireless clients connected to the network of the same SSID can access the Internet only but cannot communicate with each other Name SSID Set the name for the wireless network The SSID can contain up to 32 characters and can be letters numerals underlines and any combinations of them The SSID is case sensitive Mode Select the wireless mode Mixed 802 11b g n is recommended Channel The channel for transmitting wireless signals The default channel is Auto When you select Auto IS Y Wireless Range Extender automatically selects the best channel from the available channels according to actual situations Band Width The bandwidth occupied for wireless signal transmission Max Transmission Rate The maximum transmission rate of ISY Wireless Range Extender Security Options Set the security encryption of the wireless network to prevent unauthorized access and listening English Chapter 07 33 English Chapter 07 Security Options Security Options None v Security Options None Data encryption is not adopted and the networ
49. fter the Enable WPS check box is selected If the check box is not selected the WPS Setup menu item is greyed out Disable Router s PIN The PIN mode function in the WPS Setup page is available only when the Disable Router s PIN check box is not selected If the check box is selected the PIN mode option is unavailable 40 English Chapter 07 Wireless Card Access List Wireless Card Access Setup Available Wireless Cards Device Name Mac Address unknown 7C 11 BE 2C A7 5D O unknown 00 26 F2 4F AC 60 Wireless Card Access List Wireless Card Entry Max of terms 16 C Turn Access Control On Device Name Device Name Mac Address Mac Address J Restricting wireless access by MAC address Step 3 If the computer you want appears in the Available Wireless Cards list you can select the radio Dutton of that computer When a wireless card access list is configured and enabled the router to obtain its MAC address Otherwise you can manually checks the MAC address of any wireless device attempting a connection enter a name and MAC address of the computer to be and allows only connections to computers identified on the trusted authorized Generally the MAC address is labeled on the computer list The MAC address is a network device s unique 12 charac bottom of the wireless device ter physical address containing the hexadecimal characters 0 9 a f or Step 4 Click Add to add thi
50. hat ISY Wireless Range Extender is far distant from the terminal device or obstacles placed between them block wireless signals You can position IS Y Wireless Range Extender in a closer distance from the terminal device reduce obstacles between them or add a wireless repeater In addition place microwave ovens Bluetooth devices and wireless phones that interrupt WLAN signals far away from WLAN devices 2 The wireless network adapter fails to connect to ISY Wireless Range Extender Some early version wireless network adapters may not support WPA2 authentication You can set the authentication and encryption to WPA AES WPA TKIP or WEP 3 ISY Wireless Range Extender in the Repeater or Client mode fails to connect to the uplink AP for example the domestic gateway to access the Internet or it frequently gets disconnected from the Internet Check that ISY Wireless Range Extender is in the wireless signal co verage of its uplink device Click Site Survey in the Wireless Client Function page and check whether ISY Wireless Range Extender can search out strong wireless signals from the uplink AP 4 Wired connection to ISY Wireless Range Extender is abnormal Check status of the Ethernet indicator on the ISY Wireless Range Extender If the Ethernet indicator turns off check whether the Ethernet cable is connected properly If the problem persists replace the Ethernet cable 5 You cannot access the Internet Check whether t
51. he extended navigation menu is shown as follows Click a submenu to perform specific parameter configurations 58 Port Forwarding Service Name FTP v Service IP Address 192 168 100 Service List Max of rules 32 Server Name Start Port End Port Server IP Address Add Custom Service 9 4 1 Port Forwarding By default the firewall function of the router hides your LAN As aresult other users on the Internet can detect only the router but cannot access a certain PC in the LAN directly If you want to access a PC in an LAN you need to configure port forwarding for the router and map the desired port to the corresponding PC in the LAN The router forwards packets to the PC according to the port mapping rule after receiving an access request from the Internet In this way communic tion is successfully established between the Internet and the PC in the LAN Choose Network Application gt Port Forwarding and the Port Forwarding page is displayed Ports Custom Service Service Name Protocol TCP v Starting Port 1 65535 Ending Port J1 65535 Server IP Address 192 168 1 Service Name Select a service type Service IP Address Enter the IP address of the computer that provides services Click the Add Custom Service button and the Ports Custom Service page is displayed Service Name Select a se
52. he network adapter connected to the ISY Wireless Range Extender can automatically obtain an IP address If it fails enable DHCP for the domestic gateway or manually set the IP address of the network adaptor and DNS 6 You fails to configure ISY Wireless Range Extender using the Web page Check whether the IP address of the network adapter and that of ISY Wireless Range Extender are in the same network segment Manually set the IP address of your network adapter in the network segment of 192 168 100 2 253 according to procedures described in Chapter 5Click the submenu to enter a specific configuration page Configuring Your Computer and Wireless Connection Choose Network Settings gt LAN Interface Settings and set the IP address of ISY Wireless Range Exten der in the same network address as that of the domestic network gateway 7 WPS connection fails Ensure that one and the only WPS device connected to ISY Wireless Range Extender starts the WPS session within 2 minutes Note the WPS difference between ISY Wireless Range Extender serving as the uplink AP and that as the downlink client device in the Repeater mode see section 9 5 2 WPS Setup Refer to Table 4 1 for description on WPS indicator status English Chapter 13 97 Wireless Range Extender Extend the coverage of your existing Wi Fi network Speed Up to 300Mbps Band 2 4GHz DE WLAN Range Extender Erh hen Sie die Reichweite Ihres vorhandenen
53. his capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address Subnet mask 255 255 255 D Default gateway S Use the following DNS server addresses Preferred DNS server Alternate DNS server a Step 4 1 When ISY Wireless Range Extender is set to the Router mode select Obtain an IP address automatically Note After you finish configuring ISY Wireless Range Extender the domestic gateway can set the Internet protocol for the PC s network adapter Set the IP address and DNS server to Obtain an IP address automatically as shown in the figure above 2 When ISY Wireless Range Extender is set to other modes set the IP address of your computer to 192 168 100 X X is an integer in the range of 2 to 253 and the MAC address to 255 255 255 0 Set the gateway and the IP address of the DNS server You can leave them blank if you do not know information about the gateway and DNS server Click OK 13 English Chapter 05 on n Network Tasks Choose a wireless network Nisl Todi Choose a wireless network Refresh matwork bet Okk an iem in the bd below to connect to a wireless netreork in range or to get more Refresh natwork ket Chick an item in the iit below to connect to wireless network in range or bo get more rlormetion information d tua vereiess netwo
54. ied time for example 10 seconds until the connection is established If you pay for Internet access monthly we recommend you to use this connection mode English Chapter 09 Dial On Demand If you select it the system automatically establi shes a connection when a network access request from the LAN is received If no network access request is sent from the LAN within the specified time of Idle Timeout the system automatically interrupts the connection If you pay for Internet access by time you are recommended to use this connection mode which effectively saves the expense of Internet access Manually Connect If you select it you need to manually set dialupconnection after startup Idle Timeout If the system does not detect any Internet access behavior within the specified time of Idle Timeout the system Interrupts the Internet connection My IP Address Enter your IP address You can also leave this field blank Subnet Mask Enter the subnet mask You can also leave this field blank Sever Address Enter the IP address of the server You can also leave this field blank Gateway IP Address Enter the IP address of the gateway You can also leave this field blank Domain Name Server DNS Address Select Use These DNS Servers if you know that your ISP does not automatically transmit DNS addresses to the router during login And enter the IP address of your ISP s primary DNS server E
55. ing that the WPS connection is completed English Chapter 10 Wireless Client Function Number of Sites Scaned 3 MAC Address Channel Signal Encrypt Site Survey List TWSZ 2B08 00 1F A4 90 7A 5A 11 8696 WPA2 PSK AES SSID MAC Address Channel Signal RTL867x ADSL 00 05 1D 03 04 05 6 81 None Ralink AP111 00 AA BB 01 23 45 9 96 WLAN_5C22 00 1E E3 96 5C 2B 1 76 WPA PSK AES TKIP yuanpeifeng 00 1E E3 00 35 08 6 96 WLAN_Obde 00 1E E3 96 5C 2C 76 None test_2G 06 1F 6F 8E 87 1E 10 4 3 Wireless Client Function Step 1 Click Site Survey to search for the wireless network you Choose Wireless Settings gt Wireless Client Function and the Wireless want to connect ClientFunction page is displayed 85 English Chapter 10 Wireless Client Function Wireless Client Function Mone E Step 2 Enter encryption information of the selected wireless Step 3 ISY Wireless Range Extender provides the wireless roaming network Configure the client with the same security function if you select Synchronize Wireless Universal settings as the selected network Click Next Repeater s And Uplink AP s SSID And Security Options Click Finish Then the client can communicate with the selected network 86 11 Web Configuration for the WDS Mode 11 1 Router Status Choose Running Status gt Router Status and the Router Status page is displayed In this page you can view information about the current running status of ISY Wireless Range
56. ireless Repeater Wireless 192 168 100 254 255 255 255 0 Disable Ethernet cable Repeater default Client default 192 168 100 254 255255 2550 Ethernet cable only Universal Wireless 15 English Chapter 06 Setup Wizard i SY This setup wizard helps you to configure wireless settings in birdge mode simply connected Enable Wireless Router Radio Name SSID z Name SSID PocketAP 001 Language English e Secuity Options UserName admin Security Options WPA2 PSK AES Password eeeee Security Options WPA2 P SK PassPhrase 8 63 characters or 64 hex digits Step 1 Set the three way switch on the case of ISY Wireless Range 6 1 Bridge Mode Configuration Extender to the mode you want Step 1 Set the three way switch on the side panel to AP after ISY Step 2 Run the Internet Explorer IE Enter the management IP Wireless Range Extender is powered on Log in to the address of 192 168 100 253 and press Enter In the login configuration page after the system is started window that is displayed enter the user name and password both admin and click Login Step 2 Click Setup Wizard in the navigation bar on the left pane of the page Set the SSID and encryption password and note Step 3 Configure parameters for the mode you selected Terminal them down Click Finish to complete the settings devices can access the network through ISY Wireless Range Extender after you finish configu
57. k is not secure Any stations canaccess the network This option is not recommended WEP Wired equivalent privacy You can use WEP 64 or 128 bit encryption Authentication Type Select the authentication type that the system adopts I hree authentication types are available Automatic Open and Shared keys 34 Wireless Security Wireless Security Security Encryption WEP Authentication Type Automatic v Encryption Type ASCII v Encryption Strength 64 bits v Security Encryption WEP Key Key1 Key2 O Key3 O Key4 O Automatic Open Shared keys 5 ASCII characters 5 ASCII characters 5 ASCII characters 5 ASCII characters If selected the router uses an authentication type of Open or Shared keys according to the request of the host If selected hosts in the wireless network can pass the authentication and connect to the wireless network without using a password However the password is required if you want to transmit data If selected hosts in the wireless network can pass authentication only when the correct password is entered Otherwise the hosts cannot connect to the wireless network Encryption Type The type of the key to be set Hexadecimal and ASCII code are available Hex Valid characters for keys contain O 9 and A F ASCII Valid characters for keys contain all characters of
58. le English Chapter 09 6l English Chapter 09 UPnP TT Turn UPnP On Advertisement Period in minutes Advertisement Time To Live in hops UPnP Portable Table Active Protocol Int Port Ext Port IP Address Description 9 4 3 UPnP By using the Universal Plug and Play UPnP protocol a host in the LAN can ask the router to perform specific port conversion to enable an external host to access resources on the internal host when necessary For example if MSN Messenger is installed on Windows ME and Windows XP operating systems UPnP can be used for audio and video convers tions In this way functions restricted by NAT can work properly Choose Network Application UPnP and the UPnP page is displayed Turn UPnP On If selected UPnP is enabled Advertisement Period in minutes Set the broadcast interval It indicates the interval for the router broadcasting its UPnP information The value should be in the range of 1 to 1440 minutes and the default is 30 minutes 62 Advertisement Time To Live in hops The time for the broadcast to live It is the number of hops after each UPnP packet is sent The number of hops is the times that each packet can be broadcast before it vanishes The value is in the range of 1 to 255 hops and the default is 4 hops UPnP Portable Table This table shows the IP addresses of UPnP devices that are connected to the router and open internal and external ports on
59. mended You can either press the PBC Button physically on the device or press the Button right soft PBC Button OPIN Personal Identification Number As Client Select a setup method 9 PBC mode recommended English Chapter 10 WPS Setup As AP Select a setup method Push Button recommended You can either press the Push Button physically on the router or press the Button below soft Push Start PBC Button OPIN Personal Identification Number As Client Select a setup method You can either press the PBC Button physically on the Stat PBC device or press the Button right soft PBC Button e OPIN Personal Identification Number Push Button recommended You can either press the Push Button physically on the router or press the Button below soft Push Start PBC Synchronize Wireless Universal Repeater s And Uplink AP s SSID And Security Options Button OPIN Personal Identification Number 10 4 2 Using the Web Page As an AP You can perform WPS settings using the Web page for configuration Choose Wireless Settings gt WPS Setup to display the WPS Setup page You can perform WPS settings using the Web page for configuration Choose Wireless Settings gt WPS Setup to display the WPS page PBC mode Step 1 Select Push Button and click Start PBC WPS encrypted connection starts al English Chapter 10 WPS Setup As AP Select a setup method Push Button recommended
60. n page as shown in the following figure is displayed In this page you can view performance statistics information of ISY Wireless Range Extender including the numbers of sent and received packets at each port Set Interval Set the interval for traffic statistics Stop If you click this button this page always displays statistics information that was refreshed for the last time andit is not refreshed any more English Chapter 09 Connection Status IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Default Gateway 0 0 0 0 DHCP Server 0 0 0 0 DNS Server 0 0 0 0 Lease Obtained 0Day 0Hour 0Minute Lease Expires 0Day 0Hour 0Minute Click Connection Status in the Router Status page and the Connection Status page is displayed This page displays current connection informa tion of ISY Wireless Range Extender The following takes WAN connec tion of DHCP as an example Release Click the button and ISY Wireless Range Extender sends a request to the ISP for releasing the IP address the subnet mask the default gateway and DNS server settings Renew Click the button and ISY Wireless Range Extender dynamically obtains an IP address a subnet mask the default gateway and DNS server settings from the ISP The information will be displayed in this pagefor details 5l English Chapter 09 WAN Interface Settings Does your Internet Connection Require A Login ve owo Account Name If Required Ouse S
61. nection succeeds nication state Quick blick A terminal is attempting to Blink The Ethernet port is transmitting connect to the ISY Wireless Range and receiving data GE WLAN Green Off The WLAN connection is in the Quick blink Multiple terminals are connecting non communication state with a to the ISY Wireless Range Extender certain through WPS at the same time interval WPS sessions conflict Slow blink The WPS session is up On The WLAN connection is in the communication state Data is being transmitted and received in the WLAN English Chapter 04 dv award Sa Rear Panel Side Panel 4 1 2 Rear Side Panel and Interface Description INTERFACE BUTTON DESCRIPTION INTERFACE BUTTON DESCRIPTION WAN LAN IF SY WIRELESS RANGE EXTENDER IS SET TO THE AP MODE THE INTERFACE IS A WAN INTERFACE WHICH AP REPEATER CLIENT IT IS USED FOR SETTING SY WIRELESS RANGE EXTENDER CONNECTS TO WAN OR UPLINK NETWORK DEVICES TO THE AP REPEATER OR CLIENT MODE AP MODE INCLU IF ISY WIRELESS RANGE EXTENDER IS SET TO THE DING THE BRIDGE AND ROUTER MODES REPEATER MODE TO REPEATER CLIENT MODE THE INTERFACE IS AN LAN EXPAND WIRELESS NETWORK COVERAGE CLIENT MODE INTERFACE EQUIVALENT TO A WIRELESS NETWORK ADAPTER Press the Reset button gently for 3 6 seconds For enabling WPS PBC mode For more informa and then release it he system restores to the tion refer t
62. nter a secondary DNS server address if available 55 English Chapter 09 WAN Interface Settings Does your Internet Connection Require A Login Yes O No Internet Service Provider L2TP e Login Password y Connection Mode AlwaysOn el Idle Timeout In minutes My IP Address Subnet Mask Server Address Gateway IP Address Domain Name Server DNS Address 9 Get Automatically From ISP O Use These DNS Servers Primary DNS CIC IE IE Secondary DNS L 7 L MTU Setting MTU Size 616 1450 bytes 1450 Device MAC Address Use Default Address Ose Computer MAC Address O Use This MAC Address Apply Cancel MTU Size Set the maximum transmission unit The default value is recommended Router MAC Address See descriptions on setting Router MAC Address for DHCP After finishing settings click Apply to save the settings 5 L2TP If the ISP provides the user name and password for L21P dialup select Ba For details of parameter settings for this page refer to previous parame ter descriptions for PPTP 56 WDS C Enable WDS Function Enable Wireless Clients Association Wireless MAC ofthis device 00 1E E3 90 B3 63 Central base station mode Repeater MAC Address 1 Repeater MAC Address 3 Repeater MAC Address 2 Repeater MAC Address 4 9 3 WDS Function Wireless distrib
63. o WPS descriptions for each mode factory default settings 4 2 Hardware Installation 4 2 1 System Requirements Before installing the device please ensure that the following items are available At least one Ethernet RJ45 cable 10Base T 100Base T One ISY Wireless Range Extender wireless router A PC is already installed with the TCP IP protocol and the PC can access the Internet 4 2 2 Before You Begin Before you install the device please pay attention to the following items The Ethernet cables that are used to connect the device to a computer hub router or switch should be less than LOO meters Do not place this device on an uneven or unstable surface Do not put this device on the ground Keep the device clean Prevent the device from direct sunlight Avoid any metal in the device Place the device in the center of the area to optimize the wireless coverage English Chapter 04 4 3 Operation Range The operation range of ISY Wireless Range Extender depends on the actual environment The path and effect of signal transmission vary with the deployment in a house or an office For example the outdoor straight transmission distance for a certain device can reach 300 meters and the indoor transmission distance can reach 100 meters 10 English Chapter 05 English Chapter 05 5 Configuring J Your Computer T Search For Computers and Wireless Eom Disconne
64. on Protocol If Use Device as DHCP Service is selected ISY Wireless Range Extender automatically assigns IP addresses to comupters in the LAN Users do not need to configure TCP IP protocol paramters such as the IP address the subnet mask the gateway and the DNS server information for computers connected to the router s LAN 30 7 4 2 1 Using the Router as a DHCP Server Use Router as DHCP Server If you select the Use Router as DHCP Server check box ISY Wireless Range Extender serves as a DHCP server to automatically assign IP addresses to computers connected to it Starting IP Address Ending IP Address Set the starting and ending IP addresses to specify a pool of IP addresses to be assigned by the DHCP server After you set Starting IP Address Ending IP Address hosts in the LAN obtain IP addresses that are in the range of the starting and ending IP addresses DHCP Lease Time The valid time for an IP address that is automatically assigned by the DHCP server to a host The DHCP server does not assign the IP address to other hosts within the specified time English Chapter 07 Address Reservation Address Reservation Table IP Address Device Name MAC Address Address Reservation O 1 192 168 100 2 gj1291d 00 1F A4 90 73 F3 IP Address Device Name MAC Address o r 192 168 100 12 unknown 00 26 F2 4F AC 60 IP Address MAC Address Device Name 74 2 2
65. ork Respond to Ping on Internet Port f enabled the router responds to Open This option provides a less secure firewall that allows almost all ping commands from the Internet However like the DMZ server enab Internet applications to work After finishing the settings click Apply ling this function can bring about security risks Generally please disable to apply the settings this function 70 Management Function Backup Settings Backup Settings Remote Management Save a Copy of Current Settings Schedules Backup Restore Saved Setting from a File SNTP Browse i Reboot Device Restore Set Password Revert to Factory Default Settings Router Upgrade 9 6 Management Function Click Management Function and the extended navigation menu is shown as follows Click a submenu to perform specific parameter configurations English Chapter 09 9 6 1 Backup Settings Choose Management Function gt Backup Settings and the Backup Set tings page is displayed In this page you can export configuration infor mation of the router to the computer in the form of XML for later use import a previously saved or a new configuration file and restore the factory default settings of the router Backup Click Backup and save configuration information of the router as a local file Note Before saving your configuration file change the administrator password to the default admin in
66. r Mode You can choose anyone of WDS Mode or UR Mode Please choose your repeater mode as follows O WDS Mode 9 Wireless Universal Repeater Mode 10 2 Setup Wizard For settings refer to section 6 1 Repeater Mode Configuration 10 3 Repeater Mode Setting Click Repeater Mode Settings and the Repeater Mode Settings page is displayed Select Wireless Universal Repeater Mode English Chapter 10 10 4 1 WPS Setup WPS refers to Wi Fi Protected Setup You can use WPS to establish wireless connection in a quick and secure way if the uplink AP or terminal for example the network adapter has the WPS function It is suggested to first configure wireless encryption Wireless Universal Repeater EE Porket Repeater for the uplink AP If you change the wireless encryption mode after ecurity Options i f i i ERG having establishing wireless connection using WPS you must use WPS Security Options none v to establish wireless connection again Note that if the wireless client Apply does not support WPS you must manually configure the wireless client such as SSID security mode and password to make it have the same SSID and wireless security settings as the router In the Repeater mode with WDS disabled ISY Wireless Range Extender can perform WPS encrypted connection to both the uplink AP and the downlink client device The following describes how to configure WPS for the Repeater mode
67. r must be entered IP Subnet Mask Enter the WAN subnet mask provided by the ISP It varies with the network type It is usually 255 255 255 0 Class C English Chapter 09 Gateway IP Address Enter the IP address of the gateway provided by the ISP It is the IP address used for connecting to the ISP Primary DNS Enter the IP address of the primary DNS server if necess ry Secondary DNS Enter the IP address of that DNS server if the ISP provides another DNS server MTU Size Set the maximum transmission unit The default value is recommended Router MAC Address See descriptions on setting Router MAC Address for DHCP After finishing settings click Apply to save the settings 53 English Chapter 09 WAN Interface Settings Does your Internet Connection Require A Login Yes O No Internet Service Provider PPPoE v Login Password CO Service Name If Required cL dl Connection Mode AlwaysOn w Idle Timeout In minutes fd Domain Name Server DNS Address 9 Get Automatically From ISP O Use These DNS Servers Primary DNS LH II Secondary DNS LI MTU Setting MTU Size 616 1492 bytes 1222 Device MAC Address Use Default Address Use Computer MAC Address O Use This MAC Address oo 3 PPPoE If the ISP provides the user name and password for PPPoE Point to Point Protocol over Ethernet dialup select PPPoE Login Enter the user name for PPPoE dialup
68. ration by following proce dures in the sections below 16 Setup Wizard Dynamic IP DHCP detected Successfully detected the type of Internet connection you have Enter the account name gt provided by your ISP Leave it blank if your ISP does not provide the account name Parameter configuration for DHCP 6 2 Router Mode Configuration Step 1 Set the three way switch on the side panel to AP after ISY Wireless Range Extender is powered on Log in to the configuration page after the system is started Step 2 Click Mode Settings and select Router Mode The defaul mode is Bridge Mode English Chapter 06 Setup Wizard Static IP Fixed detected Succasstuty detected the type of intanet connection you have If you believe you have received this message in error please power cycle your modem unplug the modem amd plug it back in Then close Des screen and reopen new Web browser 0 9 Intemet Explorer EE Eis Optional Aer Guess Parameter configuration for static IP Step 3 Step 4 Connect your PC to ISY Wireless Range Extender using a wireless network adapter after ISY Wireless Range Extender is restarted successfully Log in to the configuration page Click Setup Wizard in the navigation bar on the left pane of the page Select Yes and click Next ISY Wireless Range Extender will automatically detect the broadband type ISY Wireless Range Extender can detect three types of broad
69. rk PocketAP 001 for a home or smal office PocketAP 001 QE Set up a meincs nwiwcrk fox a home or mall office Related Tasks Ly Gel v ren relve Change the order of C6688 p me gp rien fits apr p nari A Unsecured vereless network P rge advanced Unsecured vereless network settings phz wapi psk vk pbz man pk ep Quest 001 N Stcurty enatled wireless network WPA AP O01 babs p cinis f Securty enabled wireless network AP 001bsbs il g Unsecured ver eless network wil f Security enabled wareless network uii 9 WA v 5 2 Configuring Wireless Configuration Step 3 Your computer successfully connects to the wireless network when Connected is displayed on the right upper The following takes Windows XP as an example Do as follows to GONNER connect the wireless network adapter of your PC to ISY Wireless Range Extender Note The default SSID of ISY Wireless Range Extender is ISY AP 0O1 Step 1 Click the icon displayed at the right bottom corner of the desktop Note Ensure that your PC is installed with a wireless network adapter Step 2 In the Wireless Network Connection page double click the desired wireless network 14 English Chapter 06 English Chapter 06 6 Configuring ISY Wireless Range Extender Mope On Mope Available ManacementIP Appress Susnet MAC Appness DHCP Way of connecting to THE CASE IN THE WeB PC AP BRIDGE DEFAULT 192 168 100 254 Cos do 9 Disable Ethernet cable W
70. rk adapter configuration tool within c minutes to start WPS connection After WPS connection is established the following page is displayed indicating that the WPS connection is completed Click the PIN button on the network adapter within 2 minutes to start WPS connection After WPS connection is established the following page is displayed indicating that the WPS connection is completed PIN mode Step 1 Select PIN enter the PIN code of the network adapter refer to the client of the network adapter and click Start PIN to start WPS connection 43 English Chapter 07 Management Function Backup Settings Reboot Device Set Password Router Upgrade 7 6 Management Function Click Management Function and the extended navigation menu is shown as follows Click a submenu to perform specific parameter configurations 44 Backup Settings Save a Copy of Current Settings Restore Saved Setting from a File Revert to Factory Default Settings 7 6 1 Backup Settings Choose Management Function gt Backup Settings and the Backup Settings page is displayed In this page you can export configuration information of the router to the computer in the form of XML for later use import a previously saved or a new configuration file and restore the factory default settings of the router Backup Click Backup and save configuration information of the router as a local file Note Before s
71. rong connection may cause power or fire risks Do not place this device on an unstable surface English Chapter 02 2 Overview 2 1 Product Introduction Thank you for choosing the ISY Wireless Range Extender mini wireless router ISY Wireless Range Extender a pocket router is case shaped easy to carry and easy to install It wireless transmission rate is up to 300 Mbps It is a high performance and IEEE802 11b g n compatible network access device that can provide reliable and convenient network access service for individual users and SOHO Small Office Home Office It features Web based GUI allowing users to easily modify settings to connect the device to ISP Internet Service Provider and conveniently perform upgrade using the WEB page In addition ISY Wireless Range Extender has a three way switch on the side panel that enables users to change the device s working mode among AP Repeater and Client In the AP mode the device functions as a wireless router to achieve wireless connection for the wired LAN In the Repeater mode the device provides the URM Universal Repeater Mode function for users to expand wireless coverage of the existing AP in a quick and easy way In the Client mode the device functions as a wireless network adapter but it can provide a better transmission and connection performance 2 2 Packing List Please check whether your packing list includes the following items 1 x
72. rs f selected automatic synchronization with the network time server is enabled First NTP time server Enter the IP address of the primary NTP server The NTP server is a network time server that is used to synchronize the time of computers on the Internet When you set the first NTP time server the router obtains GMT time from the specified NTP server with 4 priority after it is connected to the Internet Second NTP time server Enter the IP address of the secondary NTP server if available Current Router Time Display the current system time of the router Time Zone Select the time zone where you are located Enable Daylight Saving Enable or disable daylight saving time DST Daylight Saving Offset Select a proper offset If itis set to 1 00 10 00 in the morning in standard time becomes 11 00 in the morning in DST Daylight Saving Dates Set the starting time and ending time of DST After finishing settings click Apply to save the settings Reboot Device Reboot Device 9 6 5 Reboot Router Choose Management Function gt Reboot Router and the Reboot Router page is displayed Click Reboot to reboot the router After the router is rebooted the system jumps to the login page English Chapter 09 Set Password Set Password Old Password Set Password Repeat New Password Web Idle Time Out Settings Web Idle Time Out 5 5 30 minutes 9 6 6 Set Passwor
73. rvice type Protocol The protocol used at the mapping port You can select T CP UDP TCP or UDP It is recommended to use TCP UDP if you do not know which protocol should be used English Chapter 09 Starting Port After the connection to the mapping port is established the corresponding port is open and the application can initiate subs quent connection requests to the open port Ending Port Set the end port of the mapping port range Service IP Address Enter the IP address of the computer that provides services After finishing settings click Apply to save the settings 59 English Chapter 09 Port Triggering C Enable Port Triggering Port Triggering Timeout in minutes 20 1 9999 Max of rules 32 Service Type Required Inbound Connection Service User Server Name 9 4 2 Port Triggering Certain applications such as WAN network games video conferences and network calls require multiple connections Because of the firewall setting these applications cannot work on a simple NAT router Howe ver certain special applications enable the applications to work on an NAT router When an application sends a connection request to a trigger port the corresponding ports are open for later connection and service provision Choose Network Application gt Port Triggering and the Port Triggering page is displayed 60 Port Triggering Services Service Name Service Us
74. s wireless device to the wireless card A F only The MAC address is in the format of XX XX XX XX XX XX access list The page jumps to the list page Torestrict wireless access by MAC address Step 1 Click Setup Access List button in the Wireless Advanced Settings page to display the Wireless Card Access List page Step 2 Click Add to add a wireless device to the wireless access control list The Wireless Card Access Setup page is dis played 41 English Chapter 07 Step 5 Select Turn Access Control On If selected you can restrict PCs access to the wireless network only allowing specified PCs to access your network according to their MAC addreses Step 6 Click Apply to save your Wireless Card Access List settings Now only devices on this list can wirelessly connect to the ISY Wireless Range Extender router 5 4 WPS Setup WPS refers to Wi Fi Protected Setup You can use WPS to establish wireless connection in a quick and secure way if the uplink AP or terminal for example the network adapter has the WPS function It is suggested to first configure wireless encryption for the uplink AP If you change the wireless encryption mode after having establishing wireless connection using WPS you must use WPS to establish wireless connection again Note that if the wireless client does not support WPS you must manually configure the wireless client such as SSID security mode and password to make it have the same SSID and wirele
75. ss security settings as the router The following descri bes how to configure WPS for the AP mode 7 5 4 1 Using the WPS Button In the AP mode with WDS disabled press the WPS button on the side panel of ISY Wireless Range Extender and the WPS button on the client device ISY Wireless Range Extender can perform WPS encrypted connection to the downlink client device 42 WPS As AP Select a setup method 9 PBC mode recommended You can either press the PBC Button physically on the Start PBC device or press the Button right soft PBC Button Stat PBC_ OPIN Personal Identification Number 7 5 4 2 Using the Web Page You can perform WPS settings using the Web page for configuration Choose Wireless Settings gt WPS Setup to display the WPS Setup page PBC mode Step 1 Select Push Button and click Start PBC WPS encrypted connection starts English Chapter 07 WPS As AP Select a setup method Success O PBC mode recommended The wirebess cient has been added to the network successnaty Click OK to go back to the Wi Fi Protected Setup page PIN Personal Identification Number rom If your Adapter supports WPS please click on Generate a client Enter Clients PIN Security Pin to input on the AP Router Gateway and put the generated client PIN number here Start PIN Step 2 Press the WPS button on the network adapter or click the Step 2 PBC button in the netwo
76. t the corresponding information is already preset Protocol Set the protocol used at service ports If you are not sure about the protocol that the application uses select TCP UDP Starting Port Ending Port The starting and ending ports of the port range where the specified service is blocked If the application uses a single port number enter the number in both fields Service Type User Defined Enter the service name Filter Service For You can block the specified service for a single computer computers within an IP address range or all computers After finishing settings click Add to add a new rule Then click Apply to save the settings English Chapter 09 69 English Chapter 09 Protection Disable Port Scan and DOS Protection Cl Respond to Ping on Internet Port NAT Filtering Secured Q Open 9 5 3 Protection NAT Filtering NAT filtering determines the way that the router deals Choose Security Options gt Protection and the Protection page is with incoming traffic displayed Secured his option provides a secured firewall to protect PCs on LAN Disable port scan and DoS protection Denial of service DoS protec from attacks from the Internet but it may not allow some Internet tion protects your LAN against DOS attacks Generally please enable the games point to point applications or multimedia applications to port scanning and DOS protection function w
77. tatic IP Address IP Address IP Subnet Mask IU Gateway IP Address Domain Name Server DNS Address 9 Get Automatically From ISP O Use These DNS Servers Primary DNS Secondary DNS MTU Setting MTU Size 616 1500 bytes 1500 Device MAC Address Use Default Address O Use Computer MAC Address Ose This MAC Address Apply 9 2 WAN Interface Settings Choose Network Settings gt WAN Interface Settings and the WAN Interface Settings page is displayed The router supports 5 modes of WAN connection including Dynamic IP DHCP Static IP PPPoE PPTP and L2TP Select the WAN connection you use Contact your ISP if you do not know your WAN connection mode 1 Dynamic IP DHCP If you select dynamic IP DHCP ISY Wireless Range Extender automati cally obtains the IP address from the ISP automatically Select DHCP when the ISP does not provide any IP network parameters 52 Account Name The account name is provided by your ISP If the ISP does not provide it you can leave the item blank Domain Name Service DNS Address Select Use These DNS Servers if you know that your ISP does not automatically transmit DNS addresses to the router during login And enter the IP address of your ISP s primary DNS server Enter a secondary DNS server address if available MTU Size Set the maximum transmission unit The default value is recommended Router MAC Address Physical
78. ution system WDS enables interconnection between APs in an IEEE 802 11 wireless network It extends the wireless network through several APs without connection of the wired backbone net work If you want to use WDS to achieve wireless repeating or bridging enable WDS Choose Wireless Settings WDS Function and the WDS Function page is displayed English Chapter 09 Enable WDS Function Enable the WDS function if you want to use this function Note that the WDS function cannot be enabled if the channel is set to Auto Enable Wireless Clients Association If not selected the wireless basic station does not transmit any signals to clients that are directly conne ted to it Central Base Station n this mode the router serves as a basic station to communicate with repeaters The basic station forwards the data of communication between repeaters to the destination repeaters Repeaters should be configured accordingly Note that a wireless basic station can be configured with up to four repeaters Repeater MAC Address 1 2 3 4 Enter the MAC address of the repe ter After finishing settings click Apply to save the settings For WDS application description refer to section 6 4 3 WDS Application 5 English Chapter 09 Network Application Port Forwarding Port Triggering UPnP IGMP Proxying DMZ Server Dynamic DNS static Routes 9 4 Network Application Click Network Application and t
79. xtender including system information LAN port status and wireless network status 48 Router Status System Info Hardware Version Firmware Version Product Name Work Mode Time and Date LAN Port MAC Address IP Address IP Subnet Mask Wireless Port Wireless Network Name SSID Region Wireless Channel 802 11 Mode Wireless Radio Broadcast Name Wireless Isolation Wi Fi Protected Setup WPS Wireless Security Mode V1 0 0 V1 0 0 Wireless Router Bridge Mode 1971 01 01 10 32 45 00 1E E3 5B DE 23 192 168 100 254 255 255 255 0 PocketAP 001 China Auto Mixed 802 11b g n Enabled ON OFF ON Mode Settings Please choose your mode as follows 9 Bridge Mode In this mode the portis used as alan port You can login web by either connecting you wired network View Wireless Basic Confi card and the lan port with ethernet cable or using your g wireless network card to connect this wireless network O Router Mode Apply 8 2 Setup Wizard For settings refer to section 6 1 Bridge Mode Configuration English Chapter 08 8 3 Mode Setting Click Mode Settings and the Mode Settings page is displayed Bridge Mode The interface on its case is an LAN interface Users can connect ISY Wireless Range Extender and the PC using an RJ45 cable or a wireless network card Router Mode Computers can connect to ISY Wireless Range Extender in a wireless way only 49 English Chapter 09
80. you can change the login password Note For security it is strongly recommended to change the default password of the administrator If you forget the password you can restore the router to the default settings The default password is admin 46 English Chapter 07 Router Upgrade Locate and select the upgrade file from your hard disk Browse Clear Config a 7 6 4 Router Upgrade Note After the software upgrade ISY Wireless Range Extender returns to the factory default settings In case of losing the previous configura Choose Management Function gt Router Upgrade and the Router tion information please save Settings before updating the software Do Upgrade page is displayed not power off the router during the upgrade To upgrade the software of the router Step 1 Click Browse to navigate to the latest software Step 2 Select the correct upgrade file If you select Clear Config the router restores to the default settings after upgrade is finished If you do not select it the current settings remain Step 3 Click Upload to start upgrade After the upgrade is completed the router automatically reboots 47 English Chapter 08 8 Web Configuration for the Bridge Mode 8 1 Router Status Choose Running Status gt Router Status and the Router Status page is displayed In this page you can view information about the current running status of ISY Wireless Range E

Wireless Range Extender INW5000

Contents

Download Pdf Manuals

Related Search

Related Contents