to the Owners Manual for the pureHeat 2-in
Contents
1. pureHeat OWNER S MANUAL INTRODUCTION FEATURES BENEFITS RECORDS SPECIFICATIONS WARNINGS CONTROLS DIAGRAMS SETTING UP THE UNIT OPERATING THE UNIT ONIN Jus A A W WW MAINTAINING THE UNIT O SAFETY amp WARNINGS CONSUMER INFORMATION 1 WARRANTY INFORMATION 1 WWW GREENTECHENV COM INTRODUCTION Welcome to a more comfortable efficient way of heating your living spaces during cold weather pureHeat is the most complete and advanced space heating system on the market It heats using a cutting edge PTC Positive Thermal Coefficient element that heats the air efficiently without drying it out It purifies your air with PCO technology that features a high power germicidal UVC bulb This bulb creates a purifying plasma that reduces mold bacteria and viruses even on surfaces so the months spent with doors and windows closed no longer means months spent in a stuffy indoor environment pureHeat is designed to provide years of trouble free service when used and maintained according to this Owner s Manual The pages of this manual will guide you through proper operation cleaning the filter and replacing the PCO Cell as necessary Thank you for purchasing pureHeat by GreenTech Environmental FEATURES BENEFITS PTC Infrared Heating Element Clean Economical and Safe Heating PCO Air Purification Technology Even Distribution of Heat from Floor t2. SETTING UP THE UNIT 1 Unpack the unit by cutting open taped areas Fold back box flaps and gently turn entire box upside down Lift box off of styrofoam packed contents Remove styrofoam turn upright We recommend keeping packing materials for future transport or storage of unit 2 Find a level and unobstructed location to place heater away from cold walls outside walls 3 Plug the POWER CORD into a grounded outlet 120V 15A or higher 4 Activate the REMOTE by removing the plastic shipping guard from the battery compartment OPERATING THE UNIT TURNING THE UNIT ON OFF Turn the unit on by pressing the I on the POWER TOGGLE Unit Rear Turn the unit off by pressing the O on the POWER TOGGLE Unit Rear e Always unplug the unit when not in use HEATER MODE e Press the HEATER CONTROL button to activate the Heater Mode This will also automatically activate Purifier Mode To toggle Purifier Mode on or off press the PURIFIER CONTROL button Set the desired temperature using the TEMPERATURE CONTROL buttons You may select a temperature from 60 to 90 degrees Fahrenheit PURIFIER MODE e Toggle the Purifier Mode on or off at any time that the unit is turned on by pressing the PURIFIER CONTROL button TIMER FUNCTION Set the TIMER FUNCTION by pressing the TIMER CONTROL button to activate it e Press the TIMER CONTROL button once for each additional hour desired 1 12 hours If you press the TIMER CONTROL b
3. WARNING WARNING CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION 10 Do not operate the heater if any cord or part of the machine is damaged or has malfunctioned Return heater for examination and repair if damage has occured Do not plug heater into anything other than a 3 prong 110v 15amp or higher grounded circuit receptacle Do not use an extension cord to power this heater Do not block the front grill or rear filter of the heater Be sure that there is adequate space around the heater for air flow Keep heater away from areas which may have standing water The heater is not made for use in bathrooms laundry areas or areas with similar attributes Do not insert any foreign objects into the vent as this may cause an electric shock fire or damage the heater itself Do not change the heater s wiring or design as it will void the warranty and possibly cause injury Always unplug heater when not in use Turn heater off before removing plug from outlet Do not place cord under any kind of covering such as carpet rugs or similar covers Place cord away from high traffic areas as best as possible to keep from injuring a person or causing damage to the cord or heater Heater is intended for indoor use only do not use outdoors The filter must be cleaned regularly to avoid clogging and possible malfunction of the heater If the heater is used in a dirtier or dustier area than normal the filter must be
4. SPACE TO THE FRONT AND AT LEAST 1 FT OF WARNING SPACE TO THE SIDES AND REAR CAUTION ATTEMPTING TO SERVICE THE UNIT BEYOND CLEANING THE FILTER OR CHANGING THE PCO CELL CREATES DANGER OF ELECTRIC SHOCK CAUTION N CAUTION DISCONNECT THE POWER CORD BEFORE CLEANING THE FILTER OR CHANGING THE PCO CELL CAUTION 4 COPYRIGHT 2010 GREENTECH ENVIRONMENTAL ALL RIGHTS RESERVED CONTROL PANEL amp REMOTE CONTROL DIAGRAMS REMOTE RECIEVER POWER INDICATOR PURIFIER HEATER PURIFIER M CONTROL CONTROL TIMER TEMPERATURE DENE SONTREE QUIET MODE LI I CONTROL TIMER a CONTROL QUIET MODE CONTROL PURIFIER uu CONTROL PURIFIER LCD DISPLAY DIAGRAM HEATING UP INDICATOR TEMPERATURE INDICATOR HEATING UP COOLING DOWN COOLING INDICATOR TIMER INDICATOR QUIET MODE PURIFIER INDIGATOR INDICATOR 0 pureHeat LOD DISPLAY CONTROL PANEL FILTER ASSEMBLY SCREW POWER CORD 6 UNIT FRONT DIAGRAM 0000001 m UNIT REAR DIAGRAM ml COPYRIGHT 2010 GREENTECH ENVIRONMENTAL ALL RIGHTS RESERVED HOT AIR OUTLET FILTER ASSEMBLY TEMPERATURE SENSOR POWER TOGGLE
5. an audible tone to let the customer know It will produce the same tone when it goes into STANDBY MODE MAINTAINING THE UNIT CLEANING THE FILTER The filter should be cleaned every 30 days or more often if you find that the filter is collecting visible particulate 1 A Unplug the POWER CORD from the outlet Remove the FILTER ASSEMBLY SCREW using a screwdriver Place the screw aside where you will not misplace it 3 Allow the FILTER ASSEMBLY to lean away from the rear of the unit until it is free to be removed Remove the FILTER from the FILTER ASSEMBLY by using a flat blade screwdriver to release the four tabs of the FILTER COVER and then carefully lifting the FILTER from the FILTER ASSEMBLY Use a vacuum cleaner to remove built up particulate from the FILTER Optionally you can also clean the FILTER using warm soapy water If you opt to using water ensure that the FILTER dries completely before continuing Carefully replace the FILTER in the FILTER ASSEMBLY Replace the FILTER COVER onto FILTER ASSEMBLY and ensure all 4 tabs are in place Set the tabs of the FILTER ASSEMBLY in their place on the rear of the unit and pivot upwards until it is properly seated 8 Replace the FILTER ASSEMBLY SCREW using a screwdriver Tighten until snug 8 Plug the POWER CORD back into the outlet COPYRIGHT 2010 GREENTECH ENVIRONMENTAL ALL RIGHTS RESERVED CLEANING THE UNIT Unplug the POWER CORD from the outlet Carefull
6. an implied warranty lasts so the above limitations may not apply to you Your relief for the breach of this warranty is limited to the relief expressly provided above In no event shall GreenTech Environmental LLC be liable for any consequential or incidental damages you may incur in connection with your purchase or use of the Product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state REGISTRATION Please register your Product within 10 days of purchase by visiting www GreenTechEnv com warranty or fill out and return the enclosed warranty registration card Registering your new GreenTech product entitles you to the most up to date GreenTech warranty and promotion information 11 WWW GREENTECHENV COM
7. cleaned more often Air dry the filter do not use any other method to quicken the process as it could damage the filter COPYRIGHT 2010 GREENTECH ENVIRONMENTAL ALL RIGHTS RESERVED CONSUMER INFORMATION GreenTech Environmental declines responsibility for all damages arising from improper use of the unit or in case of tampering with the unit WARRANTY INFORMATION LIMITED WARRANTY INFORMATION Your pureHeat Product is warranted to be free from all defects in material and workmanship in normal household use for a period of 3 Years from date of purchase The warranty is granted only to the original purchaser The warranty is subject to the following provisions Any damages or malfunctions caused by negligence abuse or use not in accordance with the Product Owner s Manual are not covered by this warranty Likewise any defects or damages caused by unauthorized service or the use of other than Genuine GreenTech Environmental Parts are not covered GreenTech Environmental LLC will at its option repair or replace a defective Product or part s for the Product that is are covered by this warranty As a matter of warranty policy GreenTech Environmental LLC will not refund the customer s purchase price LIMITED LIFETIME WARRANTY ON TRIPLE HEATING ELEMENT The heating element in the Product is warranted for the lifetime of the original purchaser If the heating element fails after the standard warranty terms have expired the p
8. o Ceiling LCD Display Does not Burn or Dry Out Air Unit Control Panel Low Operating amp Maintenance Cost Simple Remote Efficient PCO Purification for Pure Clean Heated Air Quiet Mode Overheat Safety Shut Off Tip Over Safety Shut Off RECORDS Purchase Date Model Number Serial Number Distributor Name Distributor Phone pureHeat SPECIFICATIONS Volta ser RAR e e A A dak L D E ee 120V 60Hz BONE EEE EN ae he A MAE ag dr A kDa fo ses up to 1500 watts RP A s WT ge OR Bile WE uae Pu wot PEPE AAA AE 5000BTU Remote Bal u SM ooo A id ewe ni make WZ a a AE CR2025 Temperature Control Range 2 8 saa EEE a T togi i WKS 60 90 Degrees Fahrenheit Heatine Blements be Disc As Infrared Positive Thermal Coefficient PTC Element lis e A A A A dans Baden ah ga aa a ae Lifetime Washable ATEBUFIIER Man NEE usa Aa gins Als due anaes Photo Catalytic Oxidation PCO Cell DISplay food A OOO a ey KJ PE du PRS ea LCD EN PR RL mesdames rod EPOCE ea aa aa Up to 1000 ft DS 7 che AE AT Ne mu ou qe de cv A 11 5 x7 5 x13 HxWxD Mob E LISO RARO corer A eee NE 14 Ibs Corti cat ons nee ua ce Aah Sik ode PE ome eee ease es ee SS Re ETL Canada amp US by Intertek Warranty Ii Sk eh NE Bek DRE LS Be i ok pe OPER ee ed 3 Year Factory Limited INSERTE c LISTES us WARNINGS AN WARNING DO NOT COVER THE HOT AIR OUTLET WARNING A WARNING KEEP THE UNIT AWAY FROM FABRIC OR OTHER FLAMMABLE MATERIAL GIVE THE UNIT 3 FT OF
9. urchaser should return the unit to a GreenTech Environmental Service Center for repair or replacement OBTAINING WARRANTY SERVICE To obtain warranty service you must return the defective product along with proof of purchase to the GreenTech Environmental Authorized Service Center All shipping costs submitted under this Warranty shall be borne by purchaser Unless this Warranty is expressly renewed or extended by GreenTech Environmental LLC any repaired or replaced part of unit shall be warranted to the original purchaser only for the length of the unexpired portion of the original warranty For the location of the nearest GreenTech Environmental Authorized Service Center or for other service information please visit us online at www GreenTechEnv com service Before any product is sent for service the customer should contact the GreenTech Environmental Service Center to obtain a Return Merchandise Authorization RMA Number This RMA Number should be clearly written on the box before shipping All components parts including the remote if applicable manuals and original packaging should be included in the return if available FURTHER LIMITATIONS AND EXCLUSIONS ARE AS FOLLOWS Any warranty that may be implied in connection with your purchase or use of the Product including any warranty of merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty Some states do not allow limitations on how long
10. utton again once the TIMER INDICATOR on the LCD DISPLAY reads 12h the TIMER FUNCTION will be deactivated If the Heater amp Purifier Modes are active and you set the timer it will turn both modes off after the designated time has elapsed e If either the Heater or Purifier Modes are independently active and you set the timer it will turn the active mode off after the designated time has elapsed If neither the Heater or Purifier Modes are active nothing is active and you set the timer it will turn ON both the Heater and Purifier Modes after the designated time has elapsed 0 pureHeat QUIET FUNCTION If you feel the unit is too loud for your environment such as when you are sleeping press the QUIET MODE CONTROL button The unit continues to heat and purify according to active modes but the fan runs on the most silent speed STANDBY MODE When the room exceeds set temperature by 2 Degrees F the heater goes into STANDBY MODE essentially turning off except the temperature sensor After that when the room drops 2 Degrees F below the set temperature the heater comes back to normal operation This is because the heater radiates a small amount of heat even when the fan is on the lowest setting which would cause the heater to continue raising the temperature of a small room indefinitely were it not for the STANDBY MODE feature AUDIBLE NOTIFICATIONS When the heater reaches the set temperature it will produce
11. y wipe the exterior of the unit with a soft damp not wet cloth and dry thoroughly with a soft dry cloth Do not use harsh or abrasive cleaners as these may damage the aesthetic finish of the unit Remove particulate that may have gathered in the HOT AIR OUTLET using a vacuum with a brush attachment REPLACING THE PCO CELL After some time the Replace UV BULB indicator may appear on your LCD SCREEN This indicates that you need to replace your PCO Cell You may purchase a replacement PCO Cell through your GreenTech Environmental Authorized Distributor If your distributor is not available please visit www GreenTechEnv com to contact us regarding ordering a PCO Cell directly 1 2 Du R w Remove the FILTER ASSEMBLY by following steps 1 through 3 of Cleaning the Filter Unplug the old PCO Cell by disengaging the electrical adapter in the lower right hand region of the rear of the unit Slide the old PCO Cell straight out of the rear of the unit Slide the new PCO Cell straight into it s place in the rear of the unit Connect the new PCO Cell by plugging in the electrical adapter to it s socket Replace the FILTER ASSEMBLY by following steps 7 through 9 of Cleaning the Filter e e e 5 NMF NAN Lu i IJ ELECTRICAL ADAPTER PCO CELL eee 6 6 o o o o o 0 pureHeat SAFETY INFO amp WARNINGS 1 WARNING A gt 3 WARNING WARNING 6
Download Pdf Manuals
Related Search