Home

UD.6L0202D1542A01_User Manual of iVMS

1. HIKVISION iVMS 5200 Professional User Manual for Administrator UD 6L0202D1542A01 User Manual of iVMS 5200 Professional For Administrator Hikvision iVMS 5200 Professional User Manual This manual as well as the software described in it is furnished under license and may be used or copied only in accordance with the terms of such license The content of this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by Hangzhou Hikvision Digital Technology Co Ltd Hikvision Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book Except as permitted by such license no part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical recording or otherwise without the prior written permission of Hikvision HIKVISION MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THE HIKVISION SOFTWARE HIKVISION DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS ACCURACY RELIABILITY CURRENTNESS OR OTHERWISE THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU THE EXCLUSION OF IMPLIED
2. to Chapter 9 3 1 System Settings 46 User Manual of iVMS 5200 Professional For Administrator Chapter 9 User and System Management Purpose Multiple user accounts can be added to the iVMS 5200P for accessing the system through Web Manager Control Client or Web Client and you are allowed to assign different roles for different users The roles can be specified with different permissions 9 1 Role Management Purpose You can assign the permissions to the roles as required and the user can link to the role to obtain different permissions Steps 1 Select Role Management under User Management tab If no role has been added two roles are listed by default including system administrator and system operator System Administrator Have all the permission of the iVMS 5200P System Operator Have the all the permission for operating the iVMS 5200 Control Client Click Add to open the Add Role dialog box Input the role name as desired Optionally you can also set the expiry time and description for the role 4 Optional Check the checkbox Copy from and select the default or pre defined role to copy the permission settings of it If not please perform step 5 to assign the permissions to the role 5 In the permission area select the permission type in the left panel and check the checkboxes to select the corresponding devices or functions 6 Click OK to save the settings Managing the Role Purpose After created s
3. Select the device from the list click Restore Default Password input the security code and then you can restore the default password of the selected device Note The default admin password of the device is 12345 and the security code is returned after you send the date and serial No of the device to the manufacturer 6 1 2 Adding Devices by IP Address Steps Click the Physical View tab 1 2 3 4 Click Encoding Device and click Add to activate the device adding dialog box Select Single IP Address as the adding mode Input the required information Add Offline Devices Optional If you check this checkbox when the offline device comes online the software will connect it automatically Input the analog camera number alarm input num Note input ber and alarm output number of the device When the checkbox of Add Offline Devices is checked the analog camera number alarm number and alarm output number items are available Manufacturer Optional Select the manufacturer of the device If you select third party device only adding offline devices is available IP Address Input the IP address of the device Port Input the port No of the device By default it s 8000 Alias Edit a name for the device as desired User Name Input the user name of the device Password Input the password of the device Export to Area Optional Check the checkbox to create an area by the device alias All th
4. Uninitialized 100 0GB 28 1GB gt D _ Uninitialized 278 0GB 269 5GB E ___ Uninitialized 277 0GB_ _ 252 6GB lt lt F initialized 276 568 1 3 5GB a Delete Group 4 WW j Initialize Repair Disk New Group Group Name Global IP 10 64 48 81 Index _Code 50000000000003424790 HPP Port 7510 Picture Settings HTTP Port 8080 MAX Concurrent Num f 300 Save All Advanced Click to select a group select a pre allocated disk and click gt gt to add the disk to the group You can add multiple disks to a group Notes You can also select the disk and click lt lt to remove the disk from the group If you click Delete Group the selected group and the disks under it will be deleted You can repeat step 2 4 to create more groups Click Save All to save the allocation for the Picture Storage Server After configuring the PSS you can configure to upload the alarm pictures of the device to the PSS Please perform the following steps 1 Set the event configuration via the Web Manager Please refer to Chapter 8 1 Configuring Camera Exception Alarm The Upload Image to Center and Notify Surveillance Center should be enabled when configuring the alarm settings to enable uploading the alarm pictures to PSS 2 View the alarm pictures Please enter the Alarm Center interface of the Control Client to check the alarm pictures that are uploaded to the PSS For details please refer to the User Manual of iV
5. Confirm Password Tel Email Expire Time 2099 12 31 User Status Normal Freeze PTZ Control Permission 5 0 Description Managing the User Purpose After created successfully the user account is added to the user list on the User Management page The following operations are available for managing the user Edit Click the User Name field of the user to edit the information of the device Delete To delete the information of the user select the user from the list and click Delete Force Logout You can also select the online user and click Force Logout to log out the online user Change Password Click Change Password of the user and enter the required information to change the password of the user as desired 9 3 System Configuration Purpose The log expiry time NTP settings email settings and CMS Central Management Server IP can be configured Click the E icon on the control panel or click System Configuration under System Configuration to open the System Configuration page Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration System Configuration CMS IP Log Expired Time One Week hs NTP Settings Server Address 10 7 33 18 NTP Port 123 m Email Settings Server Authentication V Enable SSL Sender Email Address xujunyang hikvision com cn Sender Name xjy SMTP Server IP Address smtp hikvision com cn SMTP Serv
6. Name Intersection _A1_in_Intersectior Level Low z Arming Schedule Edit Client Software Linkage Recording Linkage PTZ Linkage Alarm Output Linkage Message Linkage Email Linkage Triggering Pop up Image of Camera Camera Area Two way Audio South Cross Intersection Voice Alarm Text Speed Dome Intersection North Cross Intersection Garage Intersection Table 4 2 Linkage Actions for Alarm Input Triggering The image of the selected camera s pops up when alarm is Pop up Image of i triggered Camera l Enable two way audio between the Control Client and the Control Client Two way Audio Sanu selected camera when alarm is triggered Linkage Set the voice text for playing on the PC when alarm is l triggered Voice Alarm Text Note You should set voice engine as the alarm sound on Local Configuration page of Control Client Start the recording of the selected camera s on the chosen storage location when alarm is triggered Note Before you can select the camera s you must Recording Linkage Camera Record configure the record schedule for the camera s on Record Schedule page For details please refer to Chapter 7 Record Schedule Settings Trigger to call the preset patrol or pattern of the selected PTZ Linkage PTZ Linkage a camera s when alarm is triggered Alarm Output Alarm Output Select the alarm output and the external device connected Linkage Linkage can be activated when alarm is triggered Send a me
7. 10 3 1 Howto Allocate Storage Space for Storage Servel csccccecsssseeeeeeeeeeeeeeees 52 10 3 2 Howto Configure PSS Allocation and Upload Alarm Pictures to PSS 54 User Manual of iVMS 5200 Professional For Administrator Chapter 1 Overview 1 1 About This Document This user manual is intended for the administrator of the iVMS 5200 Professional V3 0 hereafter simply as iVMS 5200P It guides you to establish and configure the surveillance system Follow this manual to perform the installation of the iVMS 5200P activation of CMS access of the iVMS 5200P and configuration of the surveillance task via the provided web manager etc To ensure the properness of usage and stability of the iVMS 5200P please refer to the contents below and read the manual carefully before installation and operation 1 2 Introduction to 1VMS 5200 Professional iVMS 5200P is developed by HIKVISION for central management of video monitoring system and features flexibility scalability high reliability and powerful functions Integrating with multiple surveillance systems iVMS 5200P provides the central management information sharing convenient connection and multi service cooperation It is capable of adding devices for management live view storage and playback of record files VCA search alarm linkage etc The complete iVMS 5200P contains the following modules Note You can install the modules according to actual nee
8. Server 7 SMS Managerment Adding Camera Alarm Input Alarm Output to Area Steps 1 Inthe area tree panel click to select an area 2 Click Add and a dialog box pops up 3 Click the corresponding tab to add the camera s alarm input s or alarm output s to the area Note You can input the key word in the text filed and click Search to find the required device camera alarm input or alarm output 4 Click OK to confirm the settings Notes Upto 64 cameras can be added to one area A camera alarm input or alarm output can only be added to one area Add x Encoding Channel Alarm Input Alarm Output Search a 0A ControlCenter e Og 10 7 33 33 O ipc 2013 a Og intersection C South Cross Oa Speed Dome 1 North Cross 1 Garage e Og 10 7 52 13 CO Camera 06 Oa Camera 07 C1 Camera 08 Oa Camera 09 C1 Camera 10 Oa Camera 11 C1 Camera 12 O amp A Camera 13 Da Camera 14 Oa Camera 15 Oa Camera 16 a a ower1234 W Editing the Camera Alarm Input Alarm Output Steps 1 2 Click the field of the Name column to activate the Edit dialog box Edit the corresponding information For camera You can edit the name stream type protocol type keyboard No optional and MAG association optional Keyboard No Set a unique number for corresponding to the keyboard 34 User Manual of iVMS 5200 Professional For Administrator MAG Association The iVMS 5260 Mobile Client gets the s
9. Template All day continuous recording from Monday to Friday Weekend Template All day continuous recording from Saturday to Sunday Alarm Template 01 08 You can edit the templates as desired If you need to edit the template see Configuring Arming Schedule Template 7 Check the checkboxes to activate the linkage actions For details see Table 4 3 Linkage Actions for Device Exception Optionally click Copy to to copy the event parameters to other devices Click Save to save the settings 43 User Manual of iVMS 5200 Professional For Administrator Select Event Type HDD Offline B Copy to Save v Enable Alarm Information Name Intersection _HDD Offline Level Low hd Arming Schedule Edit Client Software Linkage Message Linkage Email Linkage Voice Alarm Text Table 4 3 Linkage Actions for Device Exception Set the voice text for playing on the PC when alarm is Control Client triggered Linkage MOIE Aan Ex Note You should set voice engine as the alarm sound on Local Configuration page of Control Client Send a message of the alarm information to one or more mobile phones Notes Before using the message linkage you should install and configure the SMS Short Message Service Message Linkage Message Linkage Modem For details please contact our technical engineer Only the users that are configured with mobile phone number are available in the pop up window when you click Receiver For configuring user
10. and alarm outputs of the device will be added to the area by default Superior Select the parent area for the newly created area Stream Media Server Input the IP address of the stream media server to get the video stream of a camera via the server Optional If no server has been added to the iVMS 5200P you can click SMS Management to add one For details please refer to Chapter 6 2 Adding the Server Click OK to add the device 31 User Manual of iVMS 5200 Professional For Administrator Add x Adding Mode Domain Name Z Add Offline Devices Manufacturer HIKVISION Domain Port Alias UserName admin Password eeeee Export to Area V Superior ControlCenter a Stream Media Server 4 SMS Managerment The devices will be displayed on the device list for management after added successfully You can check the network status camera number and other information of the added devices on the list You can also input the device name in the filter field for search Click the Alias field of the device and you can edit the information of the device Modify x Adding Mode Single IP Address kd Add Offline Devices Manufacturer HIKVISION Alias 172 9 3 143 IP Address 172 9 3 143 Port 8000 UserName admin Password eeeee Select the device s from the list and click Delete to remove the selected device s Select a device
11. bit PC or server Please make sure that the PC or server that running the Storage Server is 64 bit operating system 10 3 How to 10 3 1 How to Allocate Storage Space for Storage Server Purpose After you install the SS Storage Server you should allocate the storage space for it before you can store the record files on it Note The SS must be installed on the 64 bit PC or server to work properly 52 User Manual of iVMS 5200 Professional For Administrator Steps 1 Double click aa on the desktop or click Start gt All Programs gt iVMS 5200 Professional gt iVMS 5200 Storage Config to pop up the Space Allocation window Group Partition Free space 43 10 GB 131 90 GB 4 83 GB 179 40 GB 2 In the Group Config panel click to create a disk group and configure the parameters in the pop up window It is recommended to use the default settings Max Record The maximum number of cameras that can record on this Storage Server Max Playback The maximum number of cameras that can play back from this Storage Server via Control Client Buffer Level The size of memory buffer each camera occupies for recording Max Lock Ratio The maximum percentage of HDD space that could be locked Locked record files won t be overwritten when HDD is full Disk Group Max Record o Max PlayBack 4 Buffer Level 1024 00 MaxLockRatio 20 O00000 3 Click OK to create the disk group You can also click to delete the group or c
12. disk with 600GB storage capacity Network Controller RJ45 Gigabit self adaptive Ethernet interfaces Note We also provide a dedicated product for installing and running the CMS For details please contact you dealer or our salesman For Other Servers Operating System Windows Server 2008 R2 SP1 Windows Server 2003 SP2 64 bit Processor E3 1230 V2 series processor 3 3 GHz Memory 8GB HDD Enterprise level SATA disk with 500GB storage capacity Network Controller RJ45 Gigabit self adaptive Ethernet interfaces Note We also provide dedicated products for installing and running the servers For details please contact you dealer or our salesman Installation Perform the following steps to install the server modules Steps 1 Double click the program file to enter the welcome panel of the InstallShield Wizard Click 7 User Manual of iVMS 5200 Professional For Administrator Next to start the InstallShield Wizard Welcome to the InstallShield Wizard for HS 5200 Professional The InstallShield Wizard will install WhMS 5200 Professional on your computer To continue click Next 2 Onthe next panel you are prompted to select a setup type to install WMS 5200 Professional InstallShield Wizard Setup Type Select the setup type to install Please select a setup type All program features will be installed Requires the most disk space Select which program features you want installed Recomme
13. from the list click Remote Configuration and then you can perform some remote configurations of the selected device if needed 6 2 Adding the Server Purpose You can add the server to the iVMS 5200P including SS Storage Server SMS Stream Media Server MAG Mobile Access Gateway and PSS Picture Storage Server Steps 1 Click the Physical View tab 2 Click a server type on the left panel and click Add to activate the server adding dialog box 3 Input the required information e Alias Edit a name for the device as desired 32 User Manual of iVMS 5200 Professional For Administrator IP Address Input the IP address of the server CMS IP Select the IP address of CMS Central Management Server The CMS may have two IP addresses If the server is in the same subnet with the CMS select the internal IP address of CMS If not please select the external IP address For detailed information please refer to Chapter 9 3 2 CMS IP Settings Note The ports of different servers have default value entered If the port No is changed you can enter the new value 4 Click OK to add the server The servers will be displayed on the server list for management after added successfully You can check the related information of the added servers on the list You can also input the server name in the filter field for search Click the Alias field of the server and you can edit the information of the server Select the server s
14. with HEE vente refers to the recording triggered by the alarm input or motion detection event The schedule time bar is marked with E Command refers to the recording triggered by command The schedule time bar is marked with a Note Recording triggered by command is only available for the ATM transactions when the ATM DVR is added to iVMS 5200P Optionally you can select the schedule time period and then click Delete to delete the selected time period or click the Delete All to delete all the time periods You can click Copy to to copy the time bar settings to other dates Click OK to save the settings Note Up to 4 time periods can be set for each day in the record schedule Record Schedule Template x All day template Name Recording template04 Weekday template 2 Schedule EventReco amp Command X Delete Delete All Copy to Weekend template 0 2 4 6 8 10 2 4 6 18 20 22 24 Recording template01 Mon eS ae T Recording template02 0 6 3 10 2 4 18 4 Tue nme ia Recording template03 0 2 4 6 8 10 2 4 6 18 20 22 24 Ned SaaS Sa Se Recording template04 3 A R p 5 i U l 2 6 a U zZ Recording template05 Thu Sa ae 0 2 4 6 8 10 2 4 1 4 Recording template06 Fri Recording template07 0 2 1 6 8 10 2 4 6 18 20 22 24 Sat Recording template08 4 1 4 1 4 Sun 37 User Manual of iVMS 5200 Professional For Administrator 7 2 Recording on Storage Server Purpose The storage server performs as a NVR instal
15. your PC or server perform the following steps Note Before removing the CMS you should logout the License or Dongle if you have activated the CMS so that the License or Dongle can be used for activating another CMS For details please refer to Chapter 4 Activating CMS Steps 1 Shut down all iVMS 5200P modules and exit the iVMS 5200 Service Watchdog Note The following procedure of standard system module removal may be slightly different according to the different OS versions 2 In Windows Start menu select Control Panel If using Category view find the Programs category and click Uninstall a program If using Small icons or Large icons view select Programs and Features In the list of currently installed programs right click the iVMS 5200 Professional 4 Select Uninstall and follow the removal instructions 3 2 2 Uninstall the Specific Server Modules To remove the specific module s of the iVMS 5200P e g CMS SS or the Control Client from your PC or server perform the following steps Note Before removing the CMS you should logout the License or Dongle if you have activated the CMS so that the License or Dongle can be used for activating another CMS For details please refer to Chapter 4 Activating CMS Steps 1 Shut down all iVMS 5200P modules and exit the iVMS 5200 Service Watchdog Note The following procedure of standard system module removal may be slightly different according to the different OS versions 2 I
16. 0 pictures per For detailed installation please refer second to Chapter 3 1 Installing the Server Modules MAG Mobile Access Gateway When setting the image quality as Fluent in Mobile Client the Optional MAG can provide the following functions For detailed installation please refer a Convert and distribute the low bitrate stream when live to Chapter 3 1 Installing the Server viewing the high definition video via Mobile Client Modules b Transcode and distribute up to 24 ch high definition stream Ensure the high definition live view and playback without affecting the performance of the mobile phone The following table lists the provided clients for accessing or management the iVMS 5200P Introduction Control Client iVMS 5200 Control Client is a C S software which provides For detailed installation please refer multiple operating functionalities including real time live to Chapter 3 3 Installing and view PTZ control video playback and download alarm Uninstalling the Control Client receiving log query etc Web Client iVMS 5200 Web Client is a B S software for accessing the For detailed introduction please iVMS 5200P through web browser It provides the refer to the User Manual of functionalities of live view playback and local configuration iVMS 5200 Control Client Web Manager iVMS 5200 Web Manager is a B S client for management of For detailed running environment iVMS 5200P It provides multiple function
17. 12 3 2 1 Uninstall All the Server Modules iasadussscaatonessiaceaccwnsedaeldeaseaacunebaneadadwnasmnatdueateae 12 3 2 2 Uninstall the Specific Server MOCUIES sssscccccessececeeeeseeeeesaeeeeceesseansees 12 3 3 Installing and Uninstalling the Control Clent cc eeccccccsssseceeeceeseeeeseeeeeeeeeeeeees 13 Chapter 4 Acuvating CMS raa shashccs shai cts saios a arte ndeaseueneagentenleassn pew ardeoe neces 16 4 1 Activating Vid Activation Cod Enan aina a a a a A E 16 4 1 1 ORME ACUVAU Oier a 16 4 1 2 ODE ACTIVE TIONS rii E TETT TOT EOT 18 4 2 ACUVALING Vid DONE lEn renu a aa a a 21 Chapter 5 ACCESSING TIVE IVIVIS 5 ZOOP ceina a a R a A 24 5 1 Open the Web Manager and Login c sssscccccessseceeseeesececeeeeseceeseeaeeeeseaeeeeeeees 24 5 2 PUA CCIM IV OGG S aane e a a EE tose dnaninawanda does ETE Son ouaiucnncad TO 25 Chapter 6 RESOUrCEIVIANAC SIMON eas ia is eas etetes el ee nate 26 6 1 Adding the Encoding DEVI CO sca accuses inei R E umatiogedena E 26 6 1 1 Adding Online DEVICES senres n a a e a 26 6 1 2 Adding Devices by IP Addressee anna aaa 27 6 1 3 Adding Devices by P Segmenteeinirer takers 28 6 1 4 Adding Devices by Port Segment cccessecccccesssecccceeeeeceeeeaeeeeeeesseaeeeeseaees 29 6 1 5 Adding Devices by HIDDNS ccsscccccsssseccccceseeeecseasseeeccseasececsseaeeeeesenes 30 6 1 6 Adding Devices by Domain Name ssssccccccesssececcaeeeccesseeneeceesseaseeeees
18. Client Steps 1 Double click the program file to enter the welcome panel of the InstallShield Wizard Click Next to start the InstallShield Wizard AS SAN Professional InstallShield Wizard Welcome to the InstallShield Wizard for HS 5200 Professional The InstallShield Wizard will install WMS 5200 Professional on pour computer To continue click Next 13 4 User Manual of iVMS 5200 Professional For Administrator On the next panel you are prompted to select a setup type to install Select Custom radio button and click Next to continue Setup Type Select the setup type to install Please select a setup type All program features will be installed Requires the most disk space Select which program features you want installed Recommended for advanced users Click Change and select a proper directory as desired to install the Control Client Click Next to continue Choose Destination Location Select folder where setup will install files Install MWhMS 5200 Professional to C Program Files ivM5 5200 Professional InstallShield Select the iVMS 5200 Control Client and click Next to start installation Select Features Select the features setup will install Select the features you want to install and deselect the features you want to uninstall E W DefaultFeature Description caf i MS 5200 CMS install Contral Client _Ji MS 5200 Sto
19. MS 5200 Control Client 0300001040701 55 First Choice for Security Professionals HIKVISION www hikvision com
20. SB Dongle Key and an activation file from HIKVISION Please perform the following steps to activate the CMS Note You will also get a USB Dongle Key driver from HIKVISION for installing the driver for the Dongle Key Steps 1 Decompress the USB Dongle Key driver file and run MicroDoglinstdrv exe in the folder as administrator select the installation type USB Dog Driver or Parallel Dog Driver and click Install Driver in the pop up window to install the driver of the Dongle Key Note It is recommended to select USB Dog Driver as the installation type 21 User Manual of iVMS 5200 Professional For Administrator tf MicroDog and NetDog Windows Driver fo mE Current Operating System System Platform Windows T System Path C Windows isystem32 Iriver Status The drivers with same version have already been installed Driver Installation Driver Uninstallation Iw USE Dog Driver W USE Dog Driver Parallel Dog Driver Farallel Dog Driver Date of drivers package 2010 2 4 Install E Uninstall Check x i i x1it Driver Driver Driver 2 Insert the Dongle Key into the USB interface of your PC 3 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 4 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 5 Sele
21. The port of the network management agent Used for accepting the request of RTSP The value range for the getting stream port pair RTP UDP via UDP transmission 10000 12000 and the value range for the getting stream port pair RTP RTSP via TCP transmission The communication port between the CMS and the SS and the port for searching the video files of the SS The port of the network management agent Used for inspecting the status of the Network Management Server 6304 Used for accepting the request of RTSP The value range for the getting stream port pair RTP RTCP via UDP 20000 22000 oo transmission The port of the network management agent Used for inspecting the status of the Network Management Server The communication port between the CMS and the MAG Used for accepting the request of RTSP 12000 14000 The value range for the getting stream port pair RTP UDP via UDP transmission 8008 The port for uploading and downloading the pictures aS The port of the network management agent Used for inspecting the status of the Network Management Server User Manual of iVMS 5200 Professional For Administrator 10 2 FAQ Q Why does the CMS fail to start A Please check that the port 80 you can input netstat ano findstr 80 in the console of your PC installing the CMS is not occupied by other service If it is occupied e Please change the port of the service to other value since the port 80 should be used wh
22. WARRANTIES IS NOT PERMITTED BY SOME STATES THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IN NO EVENT WILL HIKVISION ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION AND THE LIKE ARISING OUT OF THE USE OR INABILITY TO USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU User Manual of iVMS 5200 Professional For Administrator Contents Chapter 1 QV CT VIEW ahetesceentarcenaeicnaneas cameron tee enne eae ence ne aerate ene eae ene er ota 4 1 1 ADOUE TMS DOCUM OME dccescadvacencedapcancasuosesaaduscasaateastvsecnacasodasachsneduaaanaaeuactumedaucavacenaotsd 4 1 2 Introduction to IVMS 5200 Professional cccccccccssssecccceesseccesceeeeceeseueseceessaensees 4 1 3 AGIMIGISTMALON RIEN San aang aches a tno eae aa a 5 Chapter 2 Gerne SUI USGI ste sees Se a eect asleep sine tice ea spa een a 6 Chapter 3 Installation and Uninstallation cccccsssccccccsseccecceeseccceseeeseceesseeeeceessuaeeceeseaaaeees 7 3 1 Installing the Server MOGUICS viisdccensdavedim cdorconadateedivradisawnsdecatonesdncennaddondunesdecemerneeatens 7 3 2 Uninstalling the Server MOGUIES vices a
23. Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 3 Click Logout After successfully logging out the Logout Succeeded will pop up You can activate other CMS with the License 23 User Manual of iVMS 5200 Professional For Administrator Chapter 5 Accessing the 1VMS 5200P 5 1 Open the Web Manager and Login Running Environment Operating System Microsoft Windows 7 Windows 8 32 64 bit CPU Intel Pentium IV 3 0 GHz or above Memory 1G or above Video Card RADEON X700 Series Web Browser IE 8 0 or above version Chrome 34 0 Firefox 28 0 Steps 1 In the address bar of the web browser input the IP address of the CMS Central Management Server and press the Enter key A login window will pop up Example f the IP address of CMS is 172 6 21 96 and you should enter http 172 6 21 96 in the address bar 2 Input the user name and password of CMS Optionally check the checkbox of Remember Password to save the password Notes By default the user name for login is admin and the password is 12345 You are highly recommended to change the default password right after the first login to avoid safety problem 3 For the first time to login you should install the plug in before you can access the fu
24. a 01 10 7 52 13 d Camera 01 Camera 02 Camera 02 10 7 52 13 m ma E Camera 03 10 7 52 13 Camera 04 Camera 05 Camera 04 10 7 52 13 a fm 10 7 52 12 4 m r fa 10 7 52 10 D re Total 16 Record s 15 7 2 gt Page 1 Go You can set different linkage actions for the following events Camera Exception Alarm Input Encoding Device Exception Server Exception Note Camera exception refers to the video exception or the events detected in the monitoring area of the camera such as motion detection video loss line crossing etc 8 1 Configuring Camera Exception Alarm Note The camera exception types vary according to the connected device Here we take the introduction of motion detection settings as an example For the settings of other exception types please refer to the User Manual of the connected devices Purpose A motion detection alarm is triggered when the camera detects motion within its defined area The linkage actions such as Control Client linkage recording linkage and alarm output linkage can be set Steps 1 Select Camera under the Event Configuration tab 39 User Manual of iVMS 5200 Professional For Administrator 2 Inthe area tree panel select the camera to be configured and select Motion Detection as the event type Check the checkbox Enable to enable the function of motion detection Edit the name for the event and select the alarm level according to actual needs Click Remot
25. activation code received when you purchase your License 20 10 11 User Manual of iVMS 5200 Professional For Administrator Logout License x Activation Mode Online Offline Activation Code Export Request File Export Import Activation File Import Click Export and save the request file to the proper directory or the removable storage medium e g USB flash disk Copy the request file and the Offline License Activation Utility to the PC that can connect to the Internet Note If the PC accessing the iVMS 5200P via Web Manager can connect to the Internet you can skip step 5 Run the Offline License Activation Utility click Browse to select the License Request Binary File and click Browse to set the name and saving path for the License Response Binary File Click Send Request to Server to generate the response file Save the response file to the proper directory of the PC that accesses the iVMS 5200P via Web Manager In the License configuration window click Import to import the response file Click OK to confirm logging out Click Help at the top right corner and click License to pop up the License configuration window again Enter the activation code and perform the step 4 9 to logout again to complete the logout operation After successfully logging out the Logout Succeeded will pop up You can activate other CMS with the License 4 2 Activating via Dongle If you purchase the Dongle you will get a U
26. alities including for Web Manager please refer to device management record schedule settings event Chapter 5 1 Open the Web Manager configuration user management etc for the iVMS 5200P to and Login manage the connected devices Mobile Client The iVMS 5260 Mobile Client is the mobile client software For detailed installation please refer designed for getting access to the iVMS 5200P via Wi Fi 2G to the User Manual of iVMS 5260 3G and 4G network with mobile device it fulfills the functions Mobile Client of the devices connected to the iVMS 5200P such as live view remote playback PTZ control and so on 1 3 Administrator Rights When you install the servers clients and software it is important that you have administrator rights on the PCs or servers that should run these modules Consult your IT system administrator if in doubt about your rights User Manual of iVMS 5200 Professional For Administrator Chapter 2 Getting Started The following content describes the tasks typically involved in setting a working iVMS 5200P Note The contents below may not cover the exact needs of your organization Verify Initial Configuration of Encoding Devices and other Servers Before doing anything on iVMS 5200P make sure the devices cameras DVR storage server etc you are going to use are correctly installed and connected to the network etc as specified by the manufacturers Such initial configuration is required
27. as Device Address Device Serial No Net Status Encoding Device A 10 7 34 249 10 7 34 249 DS 2CD2032 120130420CCWR420556646 Offline Storage Server J Stream Media Server 172 10 1 60 172 10 1 60 DS 2CD4132FWD 1Z20131226CCCH446732260 Online 1 Mobile Access Gateway 172 10 1 66 172 10 1 66 iVMS6200C000321807Xil07nZ4DP2gCxXu1304221 Offline Picture Storage Server 172 10 7 123 172 10 7 123 DS 2DE7186 AE20140224CCWR452513138 Online 4 m p Total 12 Record s 145 z Page 1 Go Online Device 4 HIKVISION Zi Search h Addto System Modify Network Parameters 4 Restore Default Password Refresh IP Address Device Type Port Device Serial No Added 10 16 1 72 DS 7204HWI E1 8000 DS 7204HWI E10420140514AAWR123456789WCVU No 10 16 1 11 DS 7604HI ST 8000 DS 7604HI ST0820130708BBRR418574198WCVU No 10 16 1 28 iDS 2DF7286 A 8000 iDS 2DF7286 A20140430CCCH128456752C No 10 16 1 2 DS 2CD2112 8000 DS 2CD2112 10120130508CCRR421767892 No Two kinds of view are available for management the Physical View provides the management of devices and servers the Logical View provides the management of areas 6 1 1 Adding Online Devices Purpose The active online encoding devices in the same local subnet with the Web Manager will be displayed on a list You can click the Refresh button to get the latest information of the online devices You can also select protocol in the drop down list or input key word of the IP address and click Search to s
28. ber Alarm Output Number Optional Input the analog camera number alarm input number and alarm output number of the device Export to Area Optional Check the checkbox to create an area by the device alias All the cameras alarm inputs and alarm outputs of the device will be added to the area by default Superior Select the parent area for the newly created area Stream Media Server Input the IP address of the stream media server to get the video stream of a camera via the server Optional If no server has been added to the iVMS 5200P you can click SMS Management to add one For details please refer to Chapter 6 2 Adding the Server Click OK and the device of which the IP address is between the start IP address and end IP address will be added to the device list 28 User Manual of iVMS 5200 Professional For Administrator Add x E Adding Mode IP Segment Add Offline Devices V Manufacturer HIKVISION Port 8000 Start IP Address End IP Address UserName admin Password eesse Analog Channel Number 0 Alarm Input Number 0 Alarm Output Number 0 Exportto Area V 6 1 4 Adding Devices by Port Segment Steps 1 2 3 4 e e e e g e 5 Click the Physical View tab Click Encoding Device and click Add to activate the device adding dialog box Select Port Segment as the adding mode Input the required information Manufacturer Optional Select the manufacturer of t
29. ct the Dongle radio button and click Import License x Current Status Inactive Activation Mode Dongle License Import Activation File Import 6 On the pop up window select the activation file received when you purchase your License and click Open 7 Click OK and the prompt Activated will pop up when the CMS is successfully activated Update Purpose As your project grows you may need to enlarge the connectable number of cameras for your iVMS 5200P You can contact your dealer or our salesman to purchase additional features and then perform the following steps to update your CMS Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 22 User Manual of iVMS 5200 Professional For Administrator 3 Click Import and on the pop up window select the new activation file received after you purchase additional features and click Open 4 Click OK and the prompt Activated will pop up when the CMS is successfully updated Logout Purpose If you want to run the CMS on another PC or server you should logout the License first and then activate the CMS again You can also use the License to activate other CMS after you logout the License Steps 1 Log into the iVMS 5200P via
30. dd x E Adding Mode HiDDNS Add Offline Devices Manufacturer HIKVISION HIDDNS Address www hik online com Alias Device Domain UserName admin Password eeeee Export to Area V Superior ControlCenter Stream Media Server SMS Managerment E E 6 1 6 Adding Devices by Domain Name Steps 1 2 3 4 e amp 5 Click the Physical View tab Click Encoding Device and click Add to activate the device adding dialog box Select Single IP Address as the adding mode Input the required information Add Offline Devices Optional If you check this checkbox when the offline device comes online the software will connect it automatically Input the analog camera number alarm input number and alarm output number of the device Note When the checkbox of Add Offline Devices is checked the analog camera number alarm input number and alarm output number items are available Manufacturer Optional Select the manufacturer of the device If you select third party device only adding offline devices is available Domain Input the domain name of the device Port Input the port No of the device By default it s 8000 Alias Edit a name for the device as desired User Name Input the user name of the device Password Input the password of the device Export to Area Optional Check the checkbox to create an area by the device alias All the cameras alarm inputs
31. ds Module Introduction CMS Central Management Server For detailed installation please refer to Chapter 3 1 Installing the Server Modules SMS Stream Media Server Optional For detailed installation please refer to Chapter 3 1 Installing the Server Modules SS Storage Server Optional For detailed installation please refer to Chapter 3 1 Installing the Server Modules and Chapter 10 3 1 How to Allocate Storage Space for Storage Server Provide the unified authentication service for connecting with the clients and servers Provide the centralized management for the users roles permissions surveillance devices alarm device and servers Provide the configuration interface for surveillance and management module and sub systems Provide the log management and statistics function Forward and distribute the audio and video data of live view Provide the function of live view via mobile control client Obtain the audio and video data stream via the SMS Stream Media Server or directly from the connected encoding device Extract the index information and dump the audio and video data to the storage device to realize the centralized management of the mass video files User Manual of iVMS 5200 Professional For Administrator Module Introduction PSS Picture Storage Server a Provide the efficient secure convenient storage service Optional for pictures with storage efficiency of 1
32. e cameras alarm inputs and alarm outputs of the device will be added to the area by default Superior Select the parent area for the newly created area Stream Media Server Input the IP address of the stream media server to get the video stream of a camera via the server Optional If no server has been added to the iVMS 5200P 27 User Manual of iVMS 5200 Professional For Administrator you can click SMS Management to add one For details please refer to Chapter 6 2 Adding the Server Click OK to add the device Add x Adding Mode Single IP Address Add Offline Devices Manufacturer HIKVISION IP Address Port 8000 Alias UserName admin Password eeose Exportto Area V Superior ControlCenter E Stream Media Server SMS Managerment 6 1 3 Adding Devices by IP Segment Steps 1 2 3 4 e e e g g e 5 Click the Physical View tab Click Encoding Device and click Add to activate the device adding dialog box Select IP Segment as the adding mode Input the required information Manufacturer Optional Select the manufacturer of the devices Port Input the port No of the devices By default it s 8000 Start IP Address Input the start address of the IP segment End IP Address Input the end address of the IP segment User Name Input the user name of the device Password Input the password of the device Analog Channel Number Alarm Input Num
33. e Configuration and set the parameters for motion detection Event gt Motion Detection in the pop up interface Note For detailed configuration please refer to the User Manual of the device 6 Check the checkboxes to enable the linkage actions For details see Table 4 1 Linkage Actions for Motion Detection Alarm Optionally click Copy to to copy the event parameters to other cameras 8 Click Save to save the settings Select Event Type Motion Detection ha Copy to Save v Enable Alarm Information Name Intersection_South Cross_Motic Level Low z Remote Configuration Client Software Linkage Recording Linkage PTZ Linkage Alarm Output Linkage Message Linkage Email Linkage Triggering Pop up Image of Camera Camera Area Two way Audio South Cross Intersection i Voice Alarm Text v Speed Dome Intersection 7 North Cross Intersection Garage Intersection Table 4 1 Linkage Actions for Motion Detection Alarm Triggering The image of the selected camera s pops up when alarm is Pop up Image of triggered Camera A Enable two way audio between the Control Client and the Control Client Two way Audio S selected camera when alarm is triggered Linkage Set the voice text for playing on the PC when alarm is f triggered Voice Alarm Text Note You should set voice engine as the alarm sound on Local Configuration page of Control Client Start the recording of the selected camera s on the chosen storage location whe
34. eees 31 6 2 Adding the Server oni a ici hee hace ieaelrawarioee rae 32 6 3 Area Managemen Ereinionin a a e a a a a 33 Chapter 7 Re ord Schedule Setting S wiasuscciwassscdupagnadstupasadduceaneddteadancduoedneadiestuactabosseadianguaciaooaiods 36 7 1 Recording on Storage Devices of the Encoding Device cccccssseeeeeeeeesseeeeeeeees 36 7 1 1 Configuring Record Schedule Template cccccssssseccccsseecceeceesecceesaeseeeeees 37 7 2 Recording ON Storage Server sasensreisin a a AAA A 38 Chapter 8 EVEnC CONIC UFAG onnaa E ANN 39 8 1 Configuring Camera Exception Alarm esseeesssseresssreeessssecessssecresssecressseceessseeeessseeee 39 8 2 Conticuring Alarm Input Anka einna e elite 41 8 3 Configuring Device Exception LINKage cccccccssssececcseeeccecceesseccesseeseecessaaeeeeees 43 8 4 Configuring Server Exception Linkage ccccccccsssseceeceeeseeceeceeseeeccseuaeeeeseeaeeeeees 45 Chapter 9 User and System Management saicicnsdinedamadscorsdanedivaadianwasdavadeweadsseonadavedweandecswsrdaewas 47 9 1 Role Manaeement wasted tie ae 47 9 2 User Management cose ore lcten sea cunteucneaencahacunanoua T E A AR 47 9 3 SYE COnN Ua tl OM ae E 49 User Manual of iVMS 5200 Professional For Administrator 9 3 1 SVS tE SEMINE S iior ia a To E OAE EO E T TOA 50 9 3 2 CMS IP SEINES pronka S 50 Chapter dO Appa E A A erent 51 10 1 MDOGO a a N 51 10 2 FA eT T E O E OTTE O TOO 52 10 3 HOW tOna a a N eats aca 52
35. en running the CMS Please consult your IT system administrator if in doubt about how to changing the port No e Or please perform the following steps to change the port of CMS to other available value Steps 1 Shut down all iVMS 5200P modules and exit the iVMS 5200 Service Watchdog 2 Goto the installation directory of the CMS and open the server xml file by default the directory is C Program Files iVMS 5200 Professional iVMS 5200 CMS webserver Tomcat conf 3 Find the content Connector port 80 protocol HTTP 1 1 in the file and change the 80 to other value e g 85 that is not occupied by other service 4 Run the Watchdog as administrator and check the status of CMS The status changes to Running which means the CMS is working properly 5 Then you can log into the iVMS 5200P via Web Manager by inputting http P address of CMS new port in the address bar of your web browser Example input http 172 6 21 55 85 in the address bar to access the iVMS 5200P Q Why does the status of the services on the Watchdog show as Unusable A You may not run the Watchdog as administrator Please exit the Watchdog and then right click to run it as administrator Note Consult your IT system administrator if in doubt about your rights Q Why does the status of the Storage Server on the Watchdog show as Unusable after successfully allocating the storage space for the Storage Server A The Storage Server should be installed on the 64
36. er Pot No 25 49 User Manual of iVMS 5200 Professional For Administrator 9 3 1 System Settings Purpose The log expiry time NTP settings and email setting can be set Steps 1 Open the System Configuration page 2 Click the System Configuration tab to enter the System Settings interface 3 Configure the parameters according to actual needs Log Expired Time The time for keeping the log files once exceeded the files will be deleted NTP Settings Set the NTP server address and NTP port for time synchronization Email Settings Enable Server Authentication If your mail server requires authentication check this checkbox to use authentication to log in to this server and enter the login User Name and Password Enable SSL optional Check the checkbox to enable SSL if required by the SMTP server Sender Email Address The email address of sender Sender Name The name of sender SMTP Server IP Address The SMTP Server IP address or host name e g smtp 263xmail com SMTP Server Port No The SMTP port The default TCP IP port used for SMTP is 25 User Name The user account of sender s email Password The password of sender s email Email Test Click it to test whether the email settings work The corresponding attention message box will pop up 4 Click Save to save the settings 9 3 2 CMS IP Settings Purpose Two IP addresses can be set for CMS to meet the requirements of accessing via bot
37. f the iVMS 5200P Refer to Chapter 9 1 Role Management and Chapter 9 2 User Management User Manual of iVMS 5200 Professional For Administrator Chapter 3 Installation and Uninstallation The program file which is provided by HIKVISION contains 6 server modules and 1 client including iVMS 5200 CMS Central Management Server iVMS 5200 Storage Server iVMS 5200 Stream Media Server iVMS 5200 Picture Storage Server iVMS 5200 Mobile Access Gateway iVMS 5200 Service Watchdog and iVMS 5200 Control Client The server modules can be installed on different servers or PCs separately or you can install them on the same server or PC as desired 3 1 Installing the Server Modules Before you start Please check the following items before you install the server modules of the iVMS 5200P For installing CMS please check that the port 80 of your PC or server to be installed the CMS is not occupied by other service If it is occupied please change the port of the service to other value since the port 80 should be used when running the CMS You can also change the port of CMS to other available value after installation For details please refer to Chapter 10 2 FAQ The SS must be installed on the 64 bit PC or server to work properly Running Environment For CMS Operating System Windows Server 2008 R2 SP1 Windows Server 2003 SP2 64 bit Processor E5 2620 series processor with 6 cores 2 0 Ghz Memory 8GB HDD Enterprise level SATA
38. figuration of the device click Storage gt General select the HDD Net HDD or SD SDHC card and click Format to initialize the selected storage device Steps 1 Open the Record Schedule page 2 Select the camera in the camera list or in the area tree panel 36 User Manual of iVMS 5200 Professional For Administrator Check the checkbox Enable Record Schedule under Local Record Schedule to enable device local recording Select the record schedule template from the drop down list All day Template All day continuous recording whole week Weekday Template All day continuous recording from Monday to Friday Weekend Template All day continuous recording from Saturday to Sunday Recording Template 01 08 You can edit the templates as desired If you need to edit or customize the template see Chapter 7 1 1 Configuring Record Schedule Template Optionally click Copy to to copy the record schedule settings to other cameras Click Save to save the settings 7 1 1 Configuring Record Schedule Template Perform the following steps to configure the record schedule template Steps 1 2 4 Click Edit Template to enter the Record Schedule Templates interface Select the template Recording Template 01 08 to be set and you can edit the template name Click the recording type button and then click and drag on the time bar to set the time schedule sheae refers to continuous recording The schedule time bar is marked
39. from the list and click Delete to remove the selected server s 6 3 Area Management Purpose The devices added should be organized into areas for convenient management You can get the live view play back the record files and do some other operations of the devices after managing devices by areas Before you start Devices need to be added to the iVMS 5200P for area management Click the Logical View tab to enter the Area Management interface Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration Physical View Logical View Resource P 2 R Search gt area250 Encoding Channel g Alarm Input tay Alarm Output S 7g 10 7 33 33 Encoding Channel g Alarm Input g Alarm Output S ff 10 7 34 249 Encoding Channel fy Alarm Input ty Alarm Output 0 testddns dyndns athome Encoding Channel g Alarm Input tax Alarm Output 3 gt 10 7 35 253 Adding the Area Steps 1 Click P to open the Add Area dialog box 2 Select the parent area in the Superior drop down list 3 Input an area name as you want Optionally you can select a stream media server for the area to get the the video stream of the cameras belonging to this area via the server 4 Click Save to add the new area 33 User Manual of iVMS 5200 Professional For Administrator You can also select an area and click to edit the area Add x Superior ControlCenter B Area Name Stream Media
40. gin the installation 10 User Manual of iVMS 5200 Professional For Administrator Ready to Install the Program The wizard i ready to begin installation Click Install to begin the installation IF you want to review or change any of pour installation settings click Back Click Cancel to exit the wizard InstallShield 4 Apanel indicating progress of the installation is displayed WMS 5200 Professional InstallShield Wizard Setup Status Registing Alarm Management Server Installing E0200 Pro 201 4067 Si M5 5200 Servers WMS0N IFChent dll InstallShield Cancel 5 Read the post install information and click Finish to complete the installation iVMS 5200 Professional InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successtully installed WMS 5200 Professional Click Finish to exit the wizard lt Back Cancel After successfully installing the server module s the Watchdog runs automatically Note The Watchdog should be run as administrator If not please exit the Watchdog and then run it as administrator Consult your IT system administrator if in doubt about your rights 11 User Manual of iVMS 5200 Professional For Administrator 3 2 Uninstalling the Server Modules 3 2 1 Uninstall All the Server Modules To remove the entire iVMS 5200P that is the surveillance server software and related installation files and the Control Client from
41. h LAN and WAN Internal IP Address The IP address used for LAN access External IP Address Optional The IP address used for WAN access Steps 1 Open the System Configuration page 2 Click the CMS IP tab to enter the CMS IP Settings interface The internal IP address cannot be edited 3 Ifa static IP address is available for WAN access enter it in the External IP address field 4 Click Save to save the settings System Configuration CMS IP Internal IP Address External IP Address 10 7 34 16 50 User Manual of iVMS 5200 Professional For Administrator Chapter 10 Appendix 10 1 Important Ports iVMS 5200P uses particular ports when communication with other servers devices etc Make sure that the following ports are not occupied for data traffic on your network and you should open these ports in the firewall in case you may need to access the system via other networks CMS Port 80000 Used for web browser access The port of MQ message queue Used for receiving the alarm information by the Control Client 6300 The port for record query Used for receiving the query conditions 6502 The monitoring port of manual alarm 7200 Used for receiving the alarm of HIKVISION devices in listening mode 7000 Used for receiving the PTZ control command from the Control Client 7002 Used for receiving the PTZ control command from the Mobile Client 5800 6678 The communication port between the CMS and the SMS 6001
42. he devices IP Address Input the IP address of the device Start Port No Input the start port No of the port segment End Port No Input the end port No of the port segment User Name Input the user name of the device Password Input the password of the device Analog Channel Number Alarm Input Number Alarm Output Number Optional Input the analog camera number alarm input number and alarm output number of the device Export to Area Optional Check the checkbox to create an area by the device alias All the cameras alarm inputs and alarm outputs of the device will be added to the area by default Superior Select the parent area for the newly created area Stream Media Server Input the IP address of the stream media server to get the video stream of a camera via the server Optional If no server has been added to the iVMS 5200P you can click SMS Management to add one For details please refer to Chapter 6 2 Adding the Server Click OK and the device of which the port No is between the start port No and end port No will be added to the device list 29 User Manual of iVMS 5200 Professional For Administrator Add x E Adding Mode Port Segment Add Offline Devices V Manufacturer HIKVISION hd IP Address Start Port No End Port No UserName admin Password eesse Analog Channel Number 0 Alarm Input Number 0 Alarm Output Number 0 Exportto Area V 6 1 5 Adding Devices by HiDDNS Ste
43. how the corresponding devices Steps 1 Click the Physical View tab 2 Click Encoding Device and check the checkbox of the device s to be added from the list 3 Click Add to System to open the device adding dialog box 4 Input the required information IP Address Input the IP address of the device The IP address of the device is obtained automatically in this adding mode Port Input the device port No The default value is 8000 26 User User Manual of iVMS 5200 Professional For Administrator Name Input the user name of the device By default the user name is admin Password Input the password of the device By default the password is 12345 Note f multiple devices are selected only user name and password are available in the pop up dialog box Click Save to add the device s Online Device 4 HIKVISION a Search F Addto System Modify Network Parameters 4 Restore Default Password Refresh v IP Address Device Type Port Device Serial No Added 10 16 1 11 DS 7604HI ST 8000 DS 7604HI ST0820130708BBRR418574198WCVU No 10 16 1 72 DS 7204HWI E1 8000 DS 7204HWI E10420140514AAWR123456789WCVU No 10 16 1 2 DS 20D2112 1 8000 DS 20D2112 10120130508CCRR421767892 No 10 16 1 28 iDS 2DF7286 A 8000 iDS 2DF7286 A20140430CCCH128456752C No Modify Network Information Select a device from the list and click Modify Network Parameters to edit the network information of the selected device Restore Default Password
44. in number of connected cameras within a certain time period This is called the trial period If trial period have expired and the CMS has not been activated the iVMS 5200P will stop working To ensure the proper use of the iVMS 5200P you should activate the CMS before the trial period ends Note Please log into the iVMS 5200P via Web Manager refer to Chapter 5 1 Open the Web Manager and Login click Help at the top right corner and click About to check the trial period and the manageable camera number of your iVMS 5200P About x iVMS 5200 Professional S Compatible Version V3 00 00 04 20154 Has Managable Camera Number 0 Managable Camera Number 16 Has Managable Device Number 0 Managable Device Number 1024 Expire Time 08 16 2014 23 59 59 Email support hikvision com Home Page www_hikvision com 2002 2014 Hangzhou Hikvision Digital Technology Co Ltd All Rights Reserved Two activation modes are available Dongle and License We introduce the configuration of these two modes separately here If you purchase Dongle please refer to Chapter 4 2 Activating via Dongle for detailed configuration about activating the CMS via Dongle If you purchase License please refer to Chapter 4 1 Activating via Activation Code for details 4 1 Activating via Activation Code If you purchase the License you will get an activation code from HIKVISION Two ways are selectable according to your network condition 4 1 1 Online Activation P
45. in order to be able to connect the devices to the iVMS 5200P via network Install iVMS 5200P Refer to Chapter 3 Installation and Uninstallation to for the detailed installation steps Open the Web Manager Refer to Chapter 5 1 Open the Web Manager and Login Activate Your License Refer to Chapter 4 Activating CMS for the operation of activating the license Add Devices to iVMS 5200P and Configure Area iVMS 5200P can quickly scan your network for relevant encoding devices cameras DVR etc and add them to your system Or you can add the devices by inputting the required information manually The devices added should be organized into areas for convenient management Refer to Chapter 6 Resource Management Configure Record Schedule The video files of the cameras to can be recorded on the storage device according to the configured record schedule The schedule can be set as continuous alarm triggered or command triggered as desired Refer to Chapter 7 Record Schedule Settings Configure Events The camera exception device exception server exception and the alarm input can trigger linkage actions in iVMS 5200P For example when motion is detected an audible warning appears or a notification email is sent to you Refer to Chapter 8 Event Configuration Configure Users Now specify who should be able to access your iVMS 5200P and how You can set the different permissions for the users to limit the operation o
46. led on the server The record files can be stored in the storage server Before you start At least one available storage server has been added to the iVMS 5200P When installing the iVMS 5200P check the checkbox Storage Server to enable the installation of Storage Server For adding the Storage Server please refer to Chapter 6 2 Adding the Server Steps 1 Open the Record Schedule page 2 Select the camera in the camera list or in the area tree panel 3 Check the checkbox Enable Record Schedule under Storage Server Record Schedule to enable recording on storage server 4 Select the record schedule template from the drop down list If you need to edit the template see Chapter 7 1 1 Configuring Record Schedule Template 5 Select the storage server from the drop down list If you want to add delete the storage server click SS Management For detailed configuration please refer to Chapter 6 2 Adding the Server 6 Select the stream type for recording from the drop down list and select the disk grouping of the storage server Note For configuration of Storage Server please refer to Chapter 10 3 1 How to Allocate Storage Space for Storage Server 7 Optionally you can check the checkbox Obtain Video Stream via Stream Media Server to get the video stream of the camera via stream media server for recording Note A stream media server should be added properly Optionally click Copy to to copy the record schedule settings to
47. lick Export and save the request file to the proper directory or the removable storage medium e g USB flash disk 5 Copy the request file and the Offline License Activation Utility to the PC that can connect to the Internet Note If the PC accessing the iVMS 5200P via Web Manager can connect to the Internet you can skip step 5 6 Run the Offline License Activation Utility click Browse to select the License Request Binary File and click Browse to set the name and saving path for the License Response Binary File Click Send Request to Server to generate the response file Save the response file to the proper directory of the PC that accesses the iVMS 5200P via Web Manager In the License configuration window click Import to import the response file 9 Click OK and the prompt Activated will pop up when the CMS is successfully updated Logout Purpose If you want to run the CMS on another PC or server you should logout the License first and then activate the CMS again You can also use the License to activate other CMS after you logout the License Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 3 Click Logout and on the pop up window select the Offline radio button and enter the
48. lick to edit the parameters of the group 4 Inthe Partition panel click to select an available disk and click al to pre allocate the disk Note The pre allocation will format the disk and all the data on the disk will be erased Please back up and remove all the data on the disk before pre allocating it 5 After successfully pre allocating the following dialog box pops up Click OK to confirm Format the partition G successfully Note f the status of the pre allocated disk becomes Damaged you can click to repair the 53 User Manual of iVMS 5200 Professional For Administrator disk 43 10 GB 4 25 GB 200 24 1024KB 20 131 90 GB 4 25 GB Allocated 292 87 GB 0 00 GB 200 24 1024KB 20 145 83 GB 292 87 GB 178 82 GB 194 75 GB 6 Click to select a disk group select a pre allocated disk and click Add gt gt to add the disk to the group You can add multiple disks to a group Note You can also select the disk and click lt lt Delete to remove the disk from the group 7 Click Save to save the allocation for the Storage Server You can repeat step 2 6 to create more disk groups for the Storage Server 10 3 2 How to Configure PSS Allocation and Upload Alarm Pictures to PSS Purpose After you install the PSS Picture Storage Server you should allocate the storage space for it before you can use it Note The function of uploading alarm pictures to PSS should be supported by the device Please c
49. n Windows Start menu select Control Panel If using Category view find the Programs category and click Uninstall a program If using Small icons or Large icons view select Programs and Features In the list of currently installed programs right click the iVMS 5200 Professional 4 Select Change and the InstallShiled Wizard pops up Select the Modify radio button and click Next to continue 12 6 User Manual of iVMS 5200 Professional For Administrator WMS_5200 Professional Installshield Wizard Select Features Select the features setup will install Select the features you want to install and deselect the features you want to uninstall DefaultF eature Description Install deftaultteature fv iVMS 5200 Storage Server iVMS 5200 Stream Media Server 4 i MS 5200 Picture Storage Server vl i MS 5200 Mobile Access Gateway AB IVMS 5200 Service Watchdog vol VMS 5200 Control Client 0 00 MB of space required on the E drive A o4 57 MB of space available on the E dive InstallShield Uncheck the checkbox of the module s that you want to uninstall click Next and follow the removal instructions 3 3 Installing and Uninstalling the Control Client Running Environment Operating System Windows 7 Windows 8 32 64 bit CPU Intel Core i5 750 and above Memory 4GB Video Card Geforce GTX 460 and above Perform the following steps to install the iVMS 5200 Control
50. n alarm is triggered Note Before you can select the camera s you must Recording Linkage Camera Record configure the record schedule for the camera s on Record Schedule page For details please refer to Chapter 7 Record Schedule Settings Trigger to call the preset patrol or pattern of the selected PTZ Linkage PTZ Linkage camera s when alarm is triggered Alarm Output Alarm Output Select the alarm output and the external device connected Linkage Linkage can be activated when alarm is triggered User Manual of iVMS 5200 Professional For Administrator Send a message of the alarm information to one or more mobile phones Notes Before using the message linkage you should install and configure the SMS Short Message Service Message Linkage Message Linkage Modem For details please contact our technical engineer Only the users that are configured with mobile phone number are available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management Send an Email notification of the alarm information to one or more receivers Notes Only the users that are configured with email are available in the pop up window when you click Email Linkage Email Linkage Receiver For configuring users please refer to Chapter 9 2 User Management You should configure the email settings for the system in System Configuration page For details please refer
51. nager can connect to the Internet you can skip step 6 7 Run the Offline License Activation Utility click Browse to select the License Request Binary File and click Browse to set the name and saving path for the License Response Binary File Click Send Request to Server to generate the response file Save the response file to the proper directory of the PC that accesses the iVMS 5200P via Web Manager In the License configuration window click Import to import the response file 10 Click OK and the prompt Activated will pop up when the CMS is successfully activated Update Purpose 19 User Manual of iVMS 5200 Professional For Administrator As your project grows you may need to enlarge the connectable number of cameras for your iVMS 5200P You can contact your dealer or our salesman to purchase additional features and then perform the following steps to update your License Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 3 Click Update and enter the activation code received when you purchase your License Note After you contact your dealer or our salesman to purchase additional features you can use the activation code received when you purchase your License to update the CMS 4 C
52. nctions Optionally you can click Download Plug in run and install the plug in according to the prompt After the installation of plug in re open the web browser and log into the iVMS 5200P 4 Click Login PN iVMS 5200 Professional admin J Remember Password Download Plug in 24 User Manual of iVMS 5200 Professional For Administrator 5 2 Function Modules Afte The A The p Shp r successfully logging in you enter the control panel of iVMS 5200 Web Manager iVMS 5200 Professional Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration Control Panel admin Change Password Help Provide Feedback Exit Ee Resource Management Ek Record Schedule B Event Configuration User Management System Configuration ie E a iVMS 5200 Web Manager is composed of the following function modules The Resource Management module provides the adding modifying and deleting of areas and different devices and the devices can be assigned to areas for management The Record Schedule module provides the schedule settings for recording The Event Configuration module provides the settings of arming schedule alarm linkage actions and other parameters for different events of the camera alarm inputs encoding devices and servers The User Management module provides the adding modifying and deleting of user and roles and you are allowed to assign different r
53. nded for advanced users InstallShield For Complete All the modules including all the server modules and Control Client will be installed and the installation directory cannot be modified Note The default directory is C Program Files iVMS 5200 Professional or C Program Files x86 iVMS 5200 Professional Click Next to continue 1 Read the pre install information and click Install to begin the installation User Manual of iVMS 5200 Professional For Administrator 2 a TT EEE par ere Sep Ready to Install the Program The wizard i ready to begin installation Click Install to begin the installation IF you want to review or change any of your installation settings click Back Click Cancel to exit the wizard InstallShield 2 A panel indicating progress of the installation is displayed Setup Status Registing Alarm Management Server Installing Ch AWM S 5200 Servers MS VM eth anagers erer dil InstallShield Cancel 3 Read the post install information and click Finish to complete the installation The InstallShield Wizard has successtully installed WMS 5200 Professional Click Finish to exit the wizard lt Back Cancel For Custom You can select the installation directory and server modules to be installed as desired User Manual of iVMS 5200 Professional For Administrator Click Next to continue 1 Click Change and select a proper directory as desired to install the m
54. odule s Click Next to continue WM5 5200 Professional InstallShield Wizard Choose Destination Location Select folder where setup will install files Install WM 5 5200 Professional to C Program Files ivhMS 5200 Professional 2 Select the module s you want to install and click Next to start installation In this way you can install the server modules to different PCs or servers as desired Notes To build the surveillance system the iVMS 5200 CMS must be installed on ones of your PCs or servers For other modules you can install them according to actual needs Refer to Chapter 1 2 Introduction to iVMS 5200 Professional for the description of the modules Ifyou select server module s iVMS 5200 CMS iVMS 5200 Storage Server iVMS 5200 Stream Media Server iVMS 5200 Picture Storage Server or iVMS 5200 Mobile Access Gateway the iVMS 5200 Service Watchdog will be selected as well WM5 5200 Professional InstallShield Wizard Select Features Select the features setup will install Select the features you want to install and deselect the features you want to uninstall E W DefaultFeature Pescara Manage the pictures server DE MH S 5200 Picture Storage Server LJivMS 5200 Mobile Access Gateway i VMS 5200 Service Watchdog O i vMS 5200 Control Client 92 76 MB of space required on the E drive A956 MB of space available on the E dive s 3 Read the pre install information and click Install to be
55. of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window 17 User Manual of iVMS 5200 Professional For Administrator License x Current Status 9FXXXXXXXXXXX3E01 Activation Mode Dongle License Update Logout 3 Click Update and enter the activation code received when you purchase your License Note After you have contacted your dealer or our salesman to purchase additional features you can use the same activation code received when you purchase your License to update the CMS 4 Click OK and the prompt Activated will pop up when the CMS is successfully updated Logout Purpose If you want to run the CMS on another PC or server you should logout the License first and then activate the CMS again You can also use the License to activate other CMS after you logout the License Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window License x Current Status SFXXXXXXXXXXX3E01 Activation Mode Dongle License 3 Click Logout and enter the activation code received when you purchase your License in the pop up window 4 Click OK to confirm logging out After successfully logging out the Logout Succeeded will pop
56. oles for different users The roles are assigned with different permissions The System Configuration module provides the configuration of NTP settings email settings IP address settings etc function modules are easily accessed by clicking the navigation buttons on the control panel or by clicking the corresponding tab You can achieve the following functions in the upper right corner of the main page Change password of the current login user Click Help to download the help file and the log files of Watchdog configure your license and check the information of iVMS 5200P Send your problem or suggestion about the iVMS 5200P to us by clicking Provide Feedback Our technical engineers will handle your problems and suggestions as soon as possible 25 User Manual of iVMS 5200 Professional For Administrator Chapter 6 Resource Management 6 1 Adding the Encoding Device Purpose Before you can live view playback via the Control Client or set recording schedule event configuration via Web Manager you need to add devices to the iVMS 5200P and manage them by areas Click the EA icon on the control panel or click Physical View under Resource Management tab to open the Resource Management page Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration Physical View Logical View Device and Server ap Add X Delete xt Remote Configuration Search ControlCenter Ali
57. ontact your dealer or our salesman to get the list of the supported devices Steps 1 Double click aa on the desktop or click Start gt All Programs gt iVMS 5200 Professional gt iVMS 5200 Picture Storage Server to pop up the Space Allocation window Es PSS Configuration Tool Ea Disk Information Group c Uniniti 100 0GB 28 1GB D Uniniti 278 0GB 269 5GB E Uniniti 277 0GB 252 6GB F Uniniti 276 4GB 1 1GB Delete Group ne Initialize Repair Disk New Group Group Name 0000 Global IP 10 64 48 81 Index _Code 50000000000003424790 HPP Port 7510 Picture Settings HTTP Port 8080 MAX Concurrent Num 300 Save All Advanced 2 Inthe Group panel edit a name in the Group Name field and click New Group to create a new group There is a group O created by default 3 In the Disk Information panel click to select an available disk and click Initialize to pre allocate 54 User Manual of iVMS 5200 Professional For Administrator the disk After successfully pre allocating the status of the disk changes to nitialized Notes The pre allocation will format the disk and all the data on the disk will be erased Please back up and remove all the data on the disk before pre allocating it Ifthe status of the disk changes to Damaged after pre allocating you can click Repair Disk to repair the disk gh PSS Configuration Tool Se Disk Information Group Total Sp Free Sp 0 C
58. other cameras Click Save to save the settings 38 User Manual of iVMS 5200 Professional For Administrator Chapter 8 Event Configuration Purpose In iVMS 5200 Web Manager you can assign linkage actions to the event by setting up a rule For example when motion is detected an audible warning appears or other linkage actions happen The alarm information of the events can be received by the iVMS 5200 Control Client For detailed information about checking the alarm information please refer to the User Manual of iVMS 5200 Control Client Click the icon on the control panel or click Camera under Event Configuration to open the Event Configuration page Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration Camera Alarm Input Encoding Device Server Resource ControlCenter Search Search Camera Area Name Configured Event Type z Camera 01 10 7 35 251 a Camera 03 Camera 04 IPdome 172 10 9 41 Defocus Entered Region Face Capture Left Region Perin AN gt epsprereeeray Camera 01 172 10 9 49 Defocus Entered Region Face Capture Left Region Perin fay 10 9 22 1 fa 10 9 22 2 Camera 02 172 10 9 49 Defocus Entered Region Face Capture Left Region Perin fa 10 9 22 3 h A Camera 03 172 10 9 49 Defocus Entered Region Face Capture Left Region Perin ty 10 9 22 4 tay 10 9 22 5 Camera 04 172 10 9 49 Defocus Entered Region Face Capture Left Region Perin 3 ys 5 a a ee lepeiae Camer
59. ox 3 Input the user name password confirm password and PTZ control permission as desired Optionally you can set the telephone number email expire time user status and description Expire Time The date that this user account becomes invalid User Status Two kinds of status are available If you select freeze the user account is inactive until you set the user status as normal PTZ Control Permission Set the permission level 1 100 for PTZ control and the larger the value is the higher permission the user has E g when user1 and user2 control the PTZ unit at the same time the user who has the larger PTZ control permission will take the control of the PTZ movement 4 Click Role Information tab and check the checkboxes to assign the roles for the created user Note If no role has been added two default roles are selectable system administrator and system operator System administrator is the role that owns all the permission of the iVMS 5200P and system operator is the role that owns the all the permission of the iVMS 5200 Control Client For creating other roles as desired please refer to Chapter 9 1 Role Management 5 Click OK to save the settings Notes Auser name cannot contain any of the following characters lt gt Upto 64 user accounts can be added 48 User Manual of iVMS 5200 Professional For Administrator Add User x Basic Information Role Information User Name Password
60. ps 1 Click the Physical View tab 2 Click Encoding Device and click Add to activate the device adding dialog box 3 Select HiDDNS as the adding mode 4 Input the required information e Add Offline Devices Optional If you check this checkbox when the offline device comes online the software will connect it automatically Input the analog camera number alarm input number and alarm output number of the device Note When the checkbox of Add Offline Devices is checked the analog camera number alarm input number and alarm output number items are available HiDDNS Address Input the HiDDNS server address Alias Edit a name for the device as desired Device Domain Input the device domain name registered on HiDDNS server User Name Input the user name of the device Password Input the password of the device Export to Area Optional Check the checkbox to create an area by the device alias All the cameras alarm inputs and alarm outputs of the device will be added to the area by default Superior Select the parent area for the newly created area Stream Media Server Input the IP address of the stream media server to get the video stream of a camera via the server Optional If no server has been added to the iVMS 5200P you can click SMS Management to add one For details please refer to Chapter 6 2 Adding the Server 5 Click OK to add the device 30 User Manual of iVMS 5200 Professional For Administrator A
61. rage Server CIVMS 5200 Stream Media Server O WMS 5200 Picture Storage Server wf _ MS 5200 Mobile Access Gateway oof V MS 5200 Service Watchdog WMS 5200 Control Client 60 00 ME of space required on the E drive F956 MB of space available on the E dive InstallShield 14 User Manual of iVMS 5200 Professional For Administrator 5 Read the pre install information and click Install to begin the installation aa mene a Prof T SEEEN a Ready to Install the Program The wizard i ready to begin installation Click Install to begin the installation IF You want to review or change any of pour installation settings click Back Click Cancel to exit the wizard InstallShield 6 A panel indicating progress of the installation is displayed Setup Status Registing Alarm Management Server Installing E9200 Pro 201 4067 34MM S 5200 Servers WMSS0ON IFChent ll InstallShield Cancel 7 Read the post install information and click Finish to complete the installation The InstallShield Wizard has successtully installed WMS 5200 Professional Click Finish to exit the wizard lt Back Finish Cancel To uninstall the Control Client you can refer to Chapter 3 2 Uninstalling the Server Modules for detailed steps 15 User Manual of iVMS 5200 Professional For Administrator Chapter 4 Activating CMS After you install the iVMS 5200P you get a temporary License for certa
62. s please refer to Chapter 9 2 User Management Send an Email notification of the alarm information to one or more receivers Notes Only the users that are configured with email are Email Linkage Email Linkage available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management You should configure the email settings for the system in System Configuration page For details please refer to Chapter 9 3 1 System Settings 44 User Manual of iVMS 5200 Professional For Administrator 8 4 Configuring Server Exception Linkage Purpose The linkage actions can be triggered when the server is in exceptional status Steps 1 Open the Event Configuration page and click the Server tab 2 Select the server to be configured 3 Edit the name for the event and select the alarm level 4 Click Edit to select or edit the arming schedule Click OK to confirm the settings All day Template All day continuous recording whole week Weekday Template All day continuous recording from Monday to Friday Weekend Template All day continuous recording from Saturday to Sunday Alarm Template 01 08 You can edit the templates as desired If you need to edit the template see Configuring Arming Schedule Template 5 Check the checkboxes to activate the linkage actions For details see Table 4 4 Linkage Actions for Device Exception Optionally click Copy to to copy the event parameters to other ser
63. ssage of the alarm information to one or more mobile phones Notes Message Linkage Message Linkage Before using the message linkage you should install and configure the SMS Short Message Service Modem For details please contact our technical engineer User Manual of iVMS 5200 Professional For Administrator Only the users that are configured with mobile phone number are available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management Send an Email notification of the alarm information to one or more receivers Notes Only the users that are configured with email are Email Linkage Email Linkage available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management You should configure the email settings for the system in System Configuration page For details please refer to Chapter 9 3 1 System Settings 8 3 Configuring Device Exception Linkage Steps 1 Open the Event Configuration page and click the Encoding Device tab 2 Select the device to be configured 3 Select the device exception type including Device offline HDD full HDD exception illegal login etc Check the checkbox Enable Edit the name for the event and select the alarm level Click Edit to select or edit the arming schedule Click OK to confirm the settings All day Template All day continuous recording whole week Weekday
64. to Chapter 9 3 1 System Settings 8 2 Configuring Alarm Input Linkage Purpose When a device s alarm input port receives a signal from an external alarm device such as smoke detector doorbell etc the alarm input linkage actions are triggered for notification Note The alarm input should be supported by the device Before you start Add the alarm inputs to the areas for management For details please refer to Chapter 6 3 Area Management Steps 1 Open the Event Configuration page and click the Alarm Input tab 2 Select the alarm input channel to be configured and check the checkbox Enable 3 Edit the name for the alarm input and select the alarm level for it 4 Click Edit to select or edit the arming schedule Click OK to confirm the settings All day Template All day continuous recording whole week Weekday Template All day continuous recording from Monday to Friday Weekend Template All day continuous recording from Saturday to Sunday Alarm Template 01 08 You can edit the templates as desired If you need to edit the template see Configuring Arming Schedule Template 41 User Manual of iVMS 5200 Professional For Administrator 5 Check the checkboxes to activate the linkage actions For details see Table 4 2 Linkage Actions for Alarm Input Optionally click Copy to to copy the event parameters to other alarm inputs Click Save to save the settings A1_in_Intersection Copy to Save v Enable Alarm Information
65. tream from the camera via the MAG Mobile Access Gateway server A SMS Stream Media Server should be added to the iVMS 5200P to activate this function For alarm input and alarm output You can edit the name of the alarm input output 3 Click OK to save the new settings You can also click the field of Encoding Device column to check the details of the device Edit x characters such CameraName Camera0_10 7 35 250 S as lt gt cannot _ be entered Stream Type Main Stream hd Protocol Type TCP x Edit x Keyboard No A2 72 10 9 MAG Association 7 a 172 109 41 Removing Camera Alarm Input Alarm Output from the Area Steps 1 Select an area and the cameras alarm inputs and alarm outputs belonging to the area display 2 Select the item s and click Delete to remove the item s from the area Deleting the Area Steps 1 Select the area on the area tree panel 2 Click amp and the selected area will be deleted 35 User Manual of iVMS 5200 Professional For Administrator Chapter 7 Record Schedule Settings When there are video storage devices e g HDDs Net HDDs SD SDHC cards on the local device or the storage server is available you can set the record schedule of the cameras for the continuous alarm triggered or command triggered recording Click the E icon on the control panel or click Record Schedule tab to open the Record Schedule page Control Panel Reso
66. uccessfully the role is added to the role list on the Role Management page You can edit or delete the information of the roles Click the field in the Name column and you can edit the settings of the role To delete the information of the role select the role from the list and click Delete Note The system administrator and system operator roles cannot be edited or deleted 9 2 User Management Click the pos icon on the control panel or click User Management under User Management to open the User Management page 47 User Manual of iVMS 5200 Professional For Administrator Control Panel Resource Management Record Schedule Event Configuration User Management System Configuration User Management Role Management op Add X Delete Jb Force Logout m Refresh Search Serial No User Name Email User Status Mobile Created Last Login Time Descrij a 1 admin Online 2009 10 26 2014 05 04 14 12 Administrator cai 2 Operator Offline 2009 10 26 2010 03 08 00 00 Operator can not 3 xjy xjy 126 com Offline 2014 04 30 2014 05 04 11 31 Operator xjy 4 xjy2 Offline 2014 04 30 5 xjy3 Offline 2014 04 30 6 xjy4 Offline 2014 04 30 7 xjy5 Offline 2014 04 30 8 xjy6 Offline 2014 04 30 9 xjy7 Offline 2014 04 30 10 xjy8 Offline 2014 04 30 11 xjy9 Offline 2014 04 30 4 p gt Page 1 Go Total 12 Record s 15 4 Adding the User Steps I Select User Management under User Management tab 2 Click Add to open the Add User dialog b
67. up You can activate other CMS with the License 4 1 2 Offline Activation Purpose If the CMS to be activated cannot connect to the Internet you can perform the following steps to 18 User Manual of iVMS 5200 Professional For Administrator activate the License Note Offline License Activation Utility will also be provided by HIKVISION for offline activation Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window Help x License x Download Help File Download Current Status Inactive Download Watchdog Log Download Activation Mode Dongle License pees License Import Activation File import About About Cancel Cancel 3 Select the License radio button and click OK 4 On the pop up window select the Offline radio button and enter the activation code received when you purchase your License Software x Activation Mode Online Offline Activation Code Export Request File Export Import Activation File Import 5 Click Export and save the request file to the proper directory or the removable storage medium e g USB flash disk 6 Copy the request file and the Offline License Activation Utility to the PC that can connect to the Internet Note If the PC accessing the iVMS 5200P via Web Ma
68. urce Management Record Schedule Event Configuration User Management System Configuration Record Schedule Resource ControlCenterRecording Overview Search Camera Name Area Record Schedule Recording Status E ControlCenter Camera0_10 7 35 250 area250 No No z G dad Ea fap area250 Camera 01 10 7 34 249 Yes Yes Camera0_10 7 35 250 a 10 7 33 33 Camera 01 testddns dyndns at hom No No a thy 4 a fa 10 7 34 249 91 10 7 35 253 Yes Yes Camera 01 S testddns dyndns at home 02 10 7 35 252 No No EA Camera 01 10 7 35 251 No No E A 10 7 35 253 91 IPdome 172 10 9 41 No No a 4 f a fap 10 7 25 252 l Camera 01 172 10 9 49 No No z 02 T I ff 10 7 35 251 Camera 02 172 10 9 49 No No Camera 01 amp tm 172 10 9 41 Pdome Camera 04 172 10 9 49 No No amp p 172 10 9 49 Camera 01 Camera 03 172 10 9 49 No No Camera 02 Camera 03 Camera 04 t Intersection gy 10 9 22 1 G 10 9 22 2 S a i R 1N 9 22 2 gt Total 11 Record s 15 v Page 1 Go 7 1 Recording on Storage Devices of the Encoding Device Purpose Some local devices including the DVRs NVRs and Network Cameras provide storage devices such as the HDDs Net HDDs and SD SDHC cards for record files You can set a record schedule for the cameras of the local devices Before you start The newly installed storage devices need to be formatted Go to the remote configuration page Resource Management gt Physical View gt Remote Con
69. urpose If the CMS to be activated can properly connect to the Internet you can perform the following steps to activate the License 16 User Manual of iVMS 5200 Professional For Administrator Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login 2 After successfully logging in you enter the control panel of iVMS 5200 Web Manager Click Help at the top right corner and click License to pop up the License configuration window Help x License x Download Help File Download Current Status Inactive Download Watchdog Log Download Activation Mode Dongle License eee License Import Activation File Import About About Cancel Cancel Select the License radio button and click OK 4 On the pop up window select the Online radio button and enter the activation code received when you purchase your License Software x Activation Mode Online Offline Activation Code 5 Click OK and the prompt Activated will pop up when the CMS is successfully activated Update Purpose As your project grows you may need to enlarge the connectable number of cameras for your iVMS 5200P You can contact your dealer or our salesman to purchase additional features and then perform the following steps to update your License Steps 1 Log into the iVMS 5200P via Web Manager Please refer to Chapter 5 1 Open the Web Manager and Login After successfully logging in you enter the control panel
70. vers Click Save to save the settings Select Event Type Server Exception M Copy to Save Alarm Information Name ss_ Server Exception Level Low v Arming Schedule Edit Client Software Linkage Message Linkage Email Linkage Voice Alarm Text Table 4 4 Linkage Actions for Server Exception Set the voice text for playing on the PC when alarm is Control Client triggered Linkage ai a Note You should set voice engine as the alarm sound on Local Configuration page of Control Client Send a message of the alarm information to one or more mobile phones Notes Message Linkage Message Linkage Before using the message linkage you should install and configure the SMS Short Message Service Modem For details please contact our technical engineer 45 Email Linkage User Manual of iVMS 5200 Professional For Administrator Email Linkage Only the users that are configured with mobile phone number are available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management Send an Email notification of the alarm information to one Or more receivers Notes Only the users that are configured with email are available in the pop up window when you click Receiver For configuring users please refer to Chapter 9 2 User Management You should configure the email settings for the system in System Configuration page For details please refer

UD.6L0202D1542A01_User Manual of iVMS

Contents

Download Pdf Manuals

Related Search

Related Contents