Camera - ACB Auto
Contents
1. Sensor D Sensor C Sensor B Sensor A Sensor installation A B 19 D gt gt gt Sensor Sensor Rearview Sensor Sensor camera 4 45 70cm 1 Select a proper surface area 2 Select a smooth surface area which is 45 70cm to the ground along the horizontal guideline and as a horizontal guideline 12 20cm away from the left and right side Mark them for A and D sensors oe 0 3L 0 2L 0 2L 0 3L gt lt gt Y Equal Fe r 5 Install the sensor vertically the up sign must be on upside 3 Divide the distance between 4 Check the size of the hole saw to be sensor A and D into three parts matching the diameter of the sensors Mark the average point for B before drilling any holes and C sensor 6 Install the sensor E 7 Insert the plug into into the hole and the socket and turn mount firmly in the the sealing screw bumper y cap tightly Camera installation Flush mount camera installation Insert the camera and press Camera Pa Z 5a into the A hole firmly Camera Micro tab camera installation 1 Choose a proper place 2 Fix one side of the camera above the number plate and with screw drill a hole 4 Connect the system to the monitor and adjust the camera direction accordingly ECU installation Mount ECU on the driver s si2. should be replaced ASAP This picture indicates all sensors are functioning and the obstacle distance is more than 1 5m 5 0ft How does the system work Voice Optional aS A e Display 7 N E ST N Vv wv Vv Stop 0 3 m 7 4 ft 0 4 m 0 5 m 0 6 m 0 8 m Be Be Be Be Be Be OSD setting Once ignition is on one of the default clock setting Press to enter the main menu will appear as below Mode 1 2010 03 01 Parking assist lines settings Monitor settings Voice amp volume settings Date amp time settings 1 Date amp time settings Press gt to enter the main menu the icon will be highlighted Factory default Time setting Time format Press or lt to select time time format default clock setting and date Press button to save the settings and back to the main menu Shortcut key for Default clock setting Turn ignition on engine not start press and hold s for 3 seconds the buzzer will beep once to enter default clock setting mode Press gt or lt to select the default clock setting Press to save and exit or it will save and exit automatically in 3 seconds 2 Voice 8 volume settings Press to enter the main menu then press gt to choose the Press gt to enter voice amp volume settings Volume adjustment Voice on off Press or lt to adjust volume and select voice warning on off mode Press 5 b
3. to decrease the volume Press to save and exit or it will save and exit automatically in 3 seconds 2 Brightness adjustment Turn ignition on engine not start engage to reverse gear short press gt button to enter Brightness adjustment mode Press lt to adjust the brightness Press button to save and exit or it will save and exit automatically in 3 seconds 3 Voice waning on off TA E EN EY Mans 1 Turn ignition on engine not start engage to reverse gear press button to enter voice warning on off mode Press or button to turn on off the voice warning Press button to save and exit or it will save and exit automatically in 3 seconds 4 Parking assist lines adjustment Turn ignition on engine not start engage to reverse gear press and hold button for 3 seconds to enter parking assist lines adjustment mode The parking assist lines flash once Press lt to select the suitable parking assist lines suit for your needs Press button to save and exit or it will save and exit automatically in 3 seconds False detection may occur in the following Do not wash the situations sensors camera with squirt gun or swab them forcibly Please wash car with lowpressure water Please melt the ice with warm water when the sensors camera is e After installation please fully test the system y E covered by ice before use Heavy rain dirty or damanged sensor may
4. Camera gt Parking Assist System User s Manual Installation Manual Disclaimer Brief installation diagram Important notice Packing list Key features Installation tools About the product Wire connection About the monitor Sensor installation Self test function Camera installation How does the system work ECU installation OSD setting Monitor installation Shortcut key Parking assist lines mode selection and Attention adjustment Sensor and camera maintenance Function test after installation Troubleshooting Warranty terms Warranty card Camera Parking Assist System User s Manual The camera parking assist system is designed as a driver assistance device and should not be used as a substitute for safe parking practices The area into which the vehicle is to be reversed must be constantly visually monitored while parking We do not guarantee or assume liability for collisions or damages while reversing your vehicle Important notice Camera parking assist systems help to provide assistance when reversing and parking Driving skills such as slowing down use of mirrors etc are always essential This unit is for vehicles with 12V DC only This unit should be installed by a professional auto technician Route wiring harness away from heat sources and electrical components lt is strongly recommended to check the position of the sensors before the actual drilling of the holes Perform t
5. de of the trunk Connect the red wire to the reversing light wire Parking assist lines mode selection and adjustment There are 6 different parking assist lines modes to choose from Please refer to page 8 or page 9 for Parking assist lines adjustment According to the width of the vehicle select a suitable parking assist line it will assist you to reverse safely For Micro tab camera For micro tab camera please choose mode 1 2 or 3 For flush mount camera please choose mode 4 5 or 6 Function test after installation Use a flat board 1 0x1 5m 3x5ft standing behind the car reverse slowly to test each function respetively as shown in the manual A PRI0548 A
6. dified or used in a way not to its intended purpose d The unit has been damaged by accident unreasonable use neglect improper installation or service The warranty does not cover a Damage caused by incorrect or poor installation problems which may be caused by anomalies in the vehicle s electrical system or originating from the environment in which the system is operated b Damage to the system caused by accident or improper use in any manner whatsoever not the fault of the manufacturer distributor including but not limited to damage by water or as a result of excess voltage applied to the system or if misused or repaired or altered in any way other than by the manufacturer or it s authorized agent c False information displayed in the panel of the dash board that is caused by car with CAN bus system User Tel Vehicle Reg No Product Model No Serial No Date of Installation Name of the Retailer Signed by Retailer Camera Parking Assist System Installation Manual Brief installation diagram Sensor D Camera Sa LCD monitor Packing list Hole saw Power harness Harness X The actual sensor camera or monitor may vary from the image shown above Wire connection GND Reversing light 8 Pink Iginition Hy Orange 12V battery Black GND Spa De CB rush mount camera Micro tab camera
7. ests after finishing the installation e TFT LCD monitor with parking assist lines OSD menu e Flush mount or micro tab camera available e Shock vibration and water resistant camera e PAL or NTSC mode available e Accurate digital distance and clear rearview shown on the monitor e Audible warning and voice warning optional volume adjustable e Self test function e Anti false alert technology About the product About the monitor This camera parking assist system comes with 4 sensors a camera and a TFT LCD monitor Turn ACC on and engage reverse gear the system will start scanning the rear area If there is any object within the detection range the image digital distances and corresponding parking assist lines will appear on the monitor while the audible sound will change tones when the distance gets shorter voice warning is optional Every piece of our products has passed the most stringent test before releasing to the market It performs well at a wide temperature range and becomes very useful when you are reversing at a raining day snowing day or at night etc With this camera parking assist system on board you can enjoy a convenient and nervousfree reversing experience Parking assist lines Digital distance X Your TFT LCD monitor may be different from the drawing above 1 Rearview on the LCD monitor The color camera automatically projects the image behind the car to the monitor once the r
8. everse gear is engaged 2 Parking assist lines The space between the 2 parking assist lines is eguivalent to the width of your vehicle Any object in that space will hinder your reversing The color distance indicator will appear on the monitor when the vehicle is getting closer to the obstacle 3 Digital distance Detection range 0 3 1 5m 1 0 5 0ft The distance detected by the sensors will be shown on the left and right side of the monitor The digital number on the monitor will be refreshed every 0 1m 0 1ft When the obstacle distance is less than 0 3m 1 0ft STOP will be shown on the monitor and the speaker will beep continuously or say STOP when the voice warning is turned on 4 Monitor adjustment Allo Setting Previous Next Saving 1 Setting Button The gt button is used to turn on the on screen display menu and submenu 2 Previous button lt are used to select the previous menu and submenu 3 Next button are used to select the next menu and submenu 4 Saving button Press button to save the selection and return to previous menu Self test function The system will test the sensors automatically when the reverse gear is selected 1 If all sensors are functioning the system will beep once 2 If there is any problem with the sensors the system will beep three times to indicate that one or more sensors are damaged gt cS X Any damaged sensors
9. g sound is too low 1 Adjust the volume to a certain level Blurred image on the LCD monitor 1 Check whether there is dirt or water on the lens of the camera 2 Clean the lens with a wet cotton swab and then dry it with a soft clean cloth Parking assist lines is too high or too low 1 Adjust the parking assist lines properly according to P20 in the manual e If the problem persists please follow these steps A For consumers contact your dealer or nearby service center B For installer or dealer 1 Check the wire connection 2 Replace the ECU and recheck the system 3 Test the sensors with certified ECU using a flat wooden board 4 Plug the certified sensors into the ECU and recheck 5 Email your guestions to us and we will reply ASAP Warranty terms The unit is warranted for a limited period of time from the date of purchase In the unlikely event of a defect arising in this product when used in accordance with the manufacturer s instructions the parts would be repaired or replaced free of charge a It is required to show warranty card when making any warranty claims b The model and the unit s serial number must be the same as the information on the warranty card This warranty is non transferable and is automatically void if a The original purchaser has not completed the warranty card b The unit s serial number is defaced missing or altered c The unit has been mo
10. result in false warning occasionally Ensure that the self test procedure is completed the camera and all sensors are functioning before reversing Please clean the sensors camera with cloth or low pressure water when the sensors are covered by mud or snow Troubleshooting There is no image on the LCD monitor 1 Check whether the power supply wire is connected correctly 2 Check whether the ignition is turned to ACC ON 3 Check whether the reverse gear is selected 4 Check whether all the connections are correct 5 Check whether the video output plug is connected to the video in socket of the LCD monitor 6 Check whether the function setting of the monitor is correct 7 Check whether the camera is correctly connected to the ECU The monitor indicates a defective sensor 1 Check whether the sensor surface is clean 2 Check whether the sensor wires are plugged in the ECU properly 3 Check whether the sensor wires are damaged or not The object position does not correspond to that on the monitor 1 Are the sensor cables connected to the ECU in the correct order e g A B C D When reverse gear is selected 0 5m 0 6m will be shown on the LCD monitor No obstacle behind the vehicle 1 Check whether sensors are mounted too low or detecting the ground 2 Check whether the sensor is installed up side down 3 Unplug 1 sensor at a time to check for response e Audible voice or warnin
11. utton to save the settings and back to the main menu 3 Monitor settings Press to enter the main menu then press gt to choose the Press to enter the monitor settings Brightness setting Contrast setting Color setting Night time mode Press or to select the suitable level of the brightness contrast color and night time mode settings Press button to save the settings and back to the main menu You can select the night time mode when it is at night and the brightness of the LCD display will decrease accordingly According to your local night time range you can choose one of the following two night modes Time range 18 00 6 59 next morning LATER Time range 19 00 5 59 next morning 4 Parking assist lines settings Press to enter the main menu then press gt to choose the IM Press gt to enter the parking assist lines settings Parking assist lines mode on Parking assist lines mode off Press or lt to select the suitable parking assist lines mode 6 different modes or turn it off Press button to save the settings and back to the main menu Press gt to select the icon to turn off the parking assist lines mode Below are the shortcut methods to adjust volume voice brightness and parking assist lines mode 1 Volume adjustment Turn ignition on engine not start engage to reverse gear press gt button to increase or press lt button
Download Pdf Manuals
Related Search