IGI 500 - Chung Ho USA
Contents
1. Flow restrictor fi Hot water tank Waterspout J Drain valve rx Source water Drainage Removed water brine Ambient Hot Cold Water 10 2 Power Consumption Power Consumption Division Operation Condition month 16 ay men 2 Hot Ice making Cold 48 5 kWh month Z HOT OFF LOCK OFF Ice making Cold 24 5 kWh month X Reference 1 The above information is measured in terms of real using environmental condition Standard A family of four Non operation Condition The conditions of ice making cold and hot are under preparation Real using environmental condition 1 person 3 meals per day Iced water Cold water 150cc Ice cube 8pcs 100g 3 times Coffee amp Tea Hot water 150cc 2 times 2 It may happen small deviation 10 X If you want to cut down power consumption as the chart above you had better turn off Hot water function The halt of cold and ice making functions has not noticeable results compared to hot water function Therefore this product doesn t have option to cancel Cold and Ice making functions 09 F fe IGUASSU ICE iot emd Coll Wetter Purifier with lee Symptoms Checking items Remarks When the display is not turned on When hot water dispensing does not work even2. 2 When beep function is turned on ding ding ding ding ding is sounded 3 And when it is released HOT LOCK hot water lock LED and HOT CONT how water operation Continuous take in water LED will flash 5 times in one second intervals 8 Resetting Beep If HOT CONT hot water operation Continuous take in water touch sensor Ne button and HOT hot water dispenser selection touch sensor button is simul E taneously touched for over 3 seconds beep is reset HP 2 When beep is turned off ding ding ding ding ding sound goes off 8 And when it is released HOT LOCK hot water lock LED and HOT ECONO ZES 052 how water operation power saving selection LED will flash 5 times in one ce second intervals SE1 00 14 j fE IGUASSU ICE Ilot endl Colil Wetter Purifier with lee C amp Usage aT 6 5 Ice and Water Dispensing Method It can be the Spout of Ice Cube and Hot water intake that the lock function is released X Lock Function Ice Cube Hot Water Locking Function Hot Water Automatic Selection Release Function Setting the Ice Cube Hot water locking function using Lock 7 Hot touch sensor button prevents Ice Cube and Hot Water from being dispensed from the unit Please use it after releasing of LOCK FUNCTION 1 Ice Dispensing Mode If ICE ice dispense touch sensor button is pressed the door of the ice storage house is opened and ice comes out from the dispensing hol
3. Sediment filter About 6 months X Exchange time of filters can differ depending on location water quality tap water temperature quantity of water used and seasons summer winter Pre carbon filter 12 months Membrane filter 24 months x You can only expect to drink clean water by exchanging fil Post carbon filte 18 months a eae ie ters according to the recommended filter exchange schedule at Product name IGUASSU ICE iiot endl Colil Wetter Purifier with lee 9 Product Specification y IGUASSU ICE 500 Model name CHP 5110S Rated voltage AC TIOV 60Hz 220V 50Hz 240V 50Hz and 220V 60Hz External dimension 295W X 384D X1170H mm Rated consumed power 500W hot water ice making Consumed power Hot water 500W Cold water Ice making 105W Ambient water 1 58G 6 0Q ae Hot water Cold water 39G 55G 1 50 2 10 Ice 2 6lbs 1 2kg Monthly consumed power quantity 48 5kWh month Weather class N class 90 F 41 F 32 C 1 C Surrounding temperature 68 F 20 C 86 F 30 C Ice making Required time l3minutes Iminute 17minutes Iminute capability one time ice making one time ice making This can Daily ice making quantity differ 60Hz 50H7 17 lbs 8kg day 60Hz 13 bs 6kg day 60Hz depending on Daily maximum ice making surounding quantity 7 T deed oe 68 F 20 tempera 60Hz 50Hz when surrounding temperature is 68 F 20 C ture Ice size Heat radi
4. 17 Occasionally ice will not come out smoothly because it can be stuck each other if you do not use ice for many hours In such a case please touch ICE ice dispensing touch button twice or three times for 2 3 seconds 18 Please use the product 3 28 ft IM away from wireless machinery and tools If using the product 3 28 ft IM close to wireless machinery and tools may cause mis operation Ss a 8 Filters and Replacement 8 1 Filter Functions Sediment filter The Sediment filter removes particles and pollutants that are over 5um from the water This helps to extend the life of the membrane filter Pre carbon filter The Pre Carbon filter made from high temperature processed carbon collects chlorine THMs and organic chemical contaminants through an absorption process amp This protects the membrane and helps it function properly Membrane filter The Membrane filter removes dissolved pollutants with a molecular weight over 200 such as heavy metals bacteria and chemical contaminants via micro filtra lt lt tion through a semi permeable membrane 0 0001um pore Post carbon filter The Post Carbon filter removes dissolved gases and odors to ensure a natural tast ing water 8 2 Filter Exchange Time Filter kind Exchange time 16 y X Filter exchange time is not included within the standard warranty period The ideal filter exchange time is based on the use of 5 28G 20Q per day
5. te When installing the product do not install it at the following places e Near fire e Near flammable material e Wet place e A place exposed to rain and snow A place exposed to direct sunshine e Near chemicals volatile material organic solvent etc Dark place e A place below 32 F 0 C or a place with the possibility of dropping below 32 F 0 C X When the product is installed in a dark place and the power saving function is set then hot the water system may not operate even during daytime Install it at bright place When transporting the product do not tilt it over 45 X Severe tilting can be the cause of reduced performance Install the product at a place where the surface is level and after installation always attempt to adjust the level of the product using a level gauge X Tilting of the product can reduce water purification performance and ice making capability Leave approximately 8 in 20cm between the wall sides and rear surfaces of the prod uct so that ventilation may be smoothly performed for safe operation of product X This can be the cause of reduced performance and complications Do not install the rear of the product near any heat radiating plates at rear surface Use the following water quality range Use Use the following water quality range following water quality range e Water pressure 7 120psi 0 5 8 4kgf cm Water temperature 39 100 F 4 38 C e p H 5 10 e
6. Hardness 300ppm or less e Evaporated remains 500ppm or less e Water quality Biologically safe water quality X When using another water quality than the above discuss it with our company X If you do not use water quality within the above range without prior discussion with our company the product can be excluded from the stated warranty period ne Do not connect hot water over 100 F 38 C to this product X This can be the cause of trouble and decline in ice making performance A f 3 a E 4 Installation Precautions When connecting tubing hose take care so that the tubing hose is not be bent or pressed down by heavy objects etc X If tubing hose is blocked water does will flow smoothly and can become the source of problems Adjust the hose so that the water discharged from the drainage hose may not splash onto the product s surroundings X Brine water or the water coming out through drainage lines can easily be applied towards other water related needs such as in bathroom cleaning house cleaning laundering washing etc in order to prevent waste of water However never use the brine water as drinking water or for cooking of food Raising the brine water and drained water over 1 ft 30cm above the installation surface or connecting them over 9 84 ft 3M away from the water purifier can hinder a smooth drainage process In order to install the product in a location where the brine water and drai
7. are not mixed improving overall satisfaction in preferred temperature from the first drink Beep Function This provides customers a convenient reminder that a system setting has been changed as sounded via beep ing ding dingdong etc and as applied via system touch sensors Noise Prevention This reduces system operating noise by applying a dual noise prevention material utilizing a shock mitigation structure found at ice storage house etc Wire Condenser Natural Convection Using natural convection the system wire condensers are rated to reduce noise and thus provide further convenience for the user Convenience in Use Function operations are designed as simply as possible in order to maximize convenience Beautiful Design The IGUASSU ICE 500 truly displays sophistication and beauty This harmonizing design and newly refined look can create a modern look for any location Adoption of New Coolant The IGUASSU ICE 500 has adopted an environmentally friendly cooling system in the new R 134a a coolant that will not add to the problems of ozone layer destruction and global warming Assistance charge function Among Mobile phone PDA MP3 player Digital camera electric dictionary charge voltage can charge because product that is 5V uses USB charge Cable e Use USB charge Cable that is quoted certainly Can need special connection jack or exclusive use charge Cable according to product e When charge in case charge target produ
8. do drain switch of product back side to do ON Flushing Valve X If the drainage switch is turned on water purification and ice production stops eere er ete eo TS LAA REE 2 Take out the ice by pressing the ICE ice dispense touch sensor 3 On using Driver after extract Power Plug product whole surface Under Cover lower part It Removes 2 screws and pulls forward pressing Under Cover over downward you segregate 4 that is located to left side ambient and hot water drainage and right side cold water drainage after Under Cover separation Opening Flushing Valve Tank internal water perfectly drain 5 Combine Front Cover after lock Flushing Valve and separate raw water drain water drain hose etc all X If there is no other option but to transport the product in an inclined position transport the product in a backwards inclined position if at all possible 6 7 Understanding the Ice Making Process and Operation The ice making system of the IGUASSU ICE automatically operates according to designed program settings after applying power to the product 1 If power is supplied to the product by inserting the power plug then ice making automatically operates without any manual setting 2 Upon the initial application of power if the level of purified water goes above proper operating levels then all the ice created from the machine will be automatically removed by deicing action 3 In order to be produced cold water the co
9. function of CONT take in water Light on the LED Red when you choose the volume litter 6 2 Operation and Water Dispensing Selection B Used to dispense hot water Displays that hot water dispense was set Red Used to dispense cold ambient water Displays that cold water dispense was set Blue Displays that ambient water dispense was set Yellow green Used to dispense water into a container such as a cup after selecting the desired water temperature among ambient water cold water and hot water Used to dispense ice Lights when dispensing ice Red IGUASSU ICE Biot endl Colil Wetter Purifier with lee 6 3 Customer Warning Sensor A beep sound following aerations of the IGUASSU ICE 500 Division BEEP Remarks occurrence 1 Power ON Ding dong dang Occurrence one time 2 Touch Button Ding Occurrence one time 3 Lock Function Ding ding ding Occurrence one time 4 Water intake Start Ding Occurrence one time 5 Water intake Ending Dong Occurrence one time 6 Con Water intake Start Ding dong Occurrence one time 7 Con Water intake Ending Ding dong Ding dong Occurrence one time 8 Drain Water Level Sensor Error Ding ding ding ding One second interval 9 Beep sound Setting Releasing Ding ding ding ding ding Occurrence one time 6 4 Function Settings and Releasing Methods 1 Lock Function Ice Cube Hot Water Locking Function Hot Water Automatic Selection Release Functio
10. on a level surface Change product level using the product leg aD adjustment and confirm the level surface a level Close off the water supply valve as supplied to each household Then temporari ly remove the connector part as provided from your given water source Then connect the main water line adaptor X If the sealing O ring at the connection piece is removed or damaged it can lead to leakage Connect tubing hose into water source adaptor and then attach to the water inlet on the rear side of product Connect tubing hose into the removed water brine and drained water connec tion part on the rear side of product and then connect tubing hose into the drainage hole in sink bathroom or multi purpose room etc X Install the removed water brine line and drained water line separately If drainage does not function properly due to improper installation then water may flow back toward waterspout and cause an overflow O Adjust the tubing hose so that the discharged water brine and tap water tubing hose so that they do not splash into surrounding areas O Open the tap water valve supplied into each household and place the water source adaptor to the open position o Check to see if water is leaking at each connection part For stabilization of the cooling system and for safe use of this product insert the power plug into an AC TIOV 60Hz 220V 50Hz 240V 50Hz and 220V 60Hz power outlet after 30 minutes after the in
11. though the touch sensor button has been selected When purified water does not come out When tepid water comes out in place of cold water When hot water does not come out or when tepid water comes out Is the power plug of the product inserted properly Is the HOT LOCK hot water lock function set Does tap water come out Why is there no ambient water in the ambient water tank Is the system creating ice Is the HOT hot water operation display LED turned off Is the HOT hot water operation display LED turned on Check the ambient water tank A Insert the power plug into an AC 110V7 60Hz 220V 50Hz 240V 50Hz or 220V 60Hz power outlet Release the HOT LOCK hot water lock function See usage Page 13 See precautions Separate the power plug from during the power outlet and if tap installation and water comes out installation then connect the power method Page 9 10 11 Wait until the ambient water is purified and the water tank begins the hot water operation about 25 See usage Page 15 16 Wait until ice making cycle about 10 minutes ends Set to the hot water operation by pressing the HOT ECONO hot water operation power saving selection touch sensor button Wait until the temperature of the hot water tank rises See usage about 30 minutes after the Page 13 14 15 HOT hot water operation display LED is turned on Wait until t
12. water with ice Infrared Water Level Detection Sensor With improved detection accuracy as compared to existing mechanical detection types the Infrared OLC Sensor applies an electronic water level sensor that was developed for stable water level detection The signal is connected to a controller in order to automatically adjust purified water levels Patent No 426182 Lock Function Ice Cube Hot Water Locking Function Hot Water Automatic Selection Release Function Setting the Ice Cube Hot water locking function using Lock 7 Hot touch sensor button prevents Ice Cube and Hot Water from being dispensed from the unit Continuous Water intake Function The function of Continuous water intake can select volume of water intake of each 0 5 liter 1 0 liter according to number of times that can do ON OFF and Touch using the continuous water intake Touch button If press Push Button after volume of water intake selection because continuous water intake of ambient water or cold water is possible use is very convenient Hot water is not available to water intake continuously Product Inspection through the USB Pot We can inspect active state of product connecting our company Engineer s exclusive use PDA to USB Pot that is threaded to product Because inspected information of product is collected and manage to Server through PDA we offer Service that become Up grade still more ma S 1 Product Features d System Display Funct
13. ChungHo Nais Hot and Cold Water Purifier with Ice IGUASSU_ ICE Duno Nais Co Ltd 10 1 SCL B D 5F Dodang Dong Wonmi Gu Bucheon Kyunggi Do Korea Tel 82 0 32 677 3963 ext 260 262 269 Fax 82 0 32 671 6531 Internet www chungho co kr e mail trade chungho co kr ChungHo Nais Hot and Cold Water Purifier with ice IGUASSU_ ICE User s Manual Read instruction manual thoroughly before using product Product appearance specification etc is subject to change without prior notice if necessary for improving product performance Design and color may differ from cover model We greatly appreciate your purchase of the ChungHo Nais Hot Cold and Ice Purification System the IGUASSU ICE 500 IGUASSU ICE 500 A superior water cooler producing clean pure ice and water through the combination of our water purifier with an integrated ice maker Enjoy ice and water produced by ChungHo Nais Hot Cold and Ice Purification System the IGUASSU ICE 500 IGUASSU ICE 500 Designed and manufactured according to standard specification and is produced with a 95 quality assurance on all integrated components The system is tested thoroughly on strictquality guidelines including temperature moisture shock dust vibration etc We are sure that the IGUASSU ICE 500 s subjection to these various production processes will provide the utmost customer satisfaction in both quality and excellence Before installing or usi
14. ae er i e After transporting the product do not supply the product with power until a minimum of 30 minutes has passed for stabilization of the product e Do not install the product ina place where the surrounding temperature may drop below 32 F 0 C IGUASSU ICE iot emd Coll Wetter Purifier with lee 2 Safety Precautions y qT e Do not remove the power cord by pulling it out of the wall Always remove it by grasping the power plug e This product is for AC T1I0OV7 60Hz 220V 50Hz 240V 50Hz and 220V 60Hz only After installation arrange the power cord so that it will not be stepped on or stepped over Damage to the power cord can cause danger of electric shock or fire e If dust water etc finds its way onto the power plug wipe it off well ATN e Do not install the product in o or around largely damp areas at a place near flammable materials or at a place exposed to rain or snow There is danger of electric shock or fire There is danger of electric shock or fire e Do not put any covering etc on the rear and side of prod uct Blocking ventilation holes may raise inside temperatures allowing for system malfunc tion or even system stoppage e Fix hoses so that the brine water or the water discharged from the drainage hose may not splash into surrounding areas Other common issues facing the user 1 During use of product a
15. ation type Cold water temperature regulation 13g 1gX12ea one time ice making lea cold water tank submerging WIRE CONDENSER TYPE natural convection THERMISTOR Hot water temperature regulation Bimetal automatic return Overheating prevention system Safety system Cold water tank water level adjust ment Refrigerant Refrigerant weight Bimetal manual return Overheating prevention system water level detecting system Capacitance sensor R 134a 85 18 Product weight 78 2 bs 35 5kg Power cord 2 5m IP class IPX 10 Flow Diagram and Power Consumption 10 1 Flow Diagram Water level sensor Ambient water tank Ice making unit gt lt J lection valve S4 Cold water tank Cold Water now Vale 4 Water dispenser Hole Cold selection valve J Hot selection valve u Automatic source water intrruption valve ce storage house 19 1 QUeIQUO Jay UOq1e9 SOd L S gt _ Ice dispenser J9 I JUQWIPES JO UOGIEDIId
16. ct is badness Touch Button can be fastening state and if discon tinue charge in this case Touch Button fastening state is defrosted Also charge target product can be damaged when charge tension does not guess right e Do not pass maximum charge time 30 minutes of IGUASSU ICE iot emd Coil Wetter Purifier with lee 2 Safety Precautions y Cautions are divided into 2 categories Warnings and Precautions W Warni ng Associated with the possibility for serious injury or death e Do not use multiple electrical appliances in one power out let simultaneously This can cause a fire due to abnormal heating in wall outlet e When the power cord has been damaged exchange the power cord in order to prevent danger such as electric shock etc e Insert the power plug in a sta ble position in order to avoid swinging Do not use damaged or loose wall outlets There is danger of electric shock or fire Unstable connection can be e Do not touch the power plug with wet hands cause of fire There is danger of electric shock e Do not bend the power cord excessively nor allow it to be damaged by being pressed under heavy objects e Do not put candles lit ciga rettes etc on the product There is danger of electric shock or fire e Do not install the product near a heating appliance There is danger of fire e Do not put a bowl containing water chemicals small metal
17. ds by function that use clear water cold water at continuous water intake time select quantity of water intake want ing between 0 5 liter 1 0 liters if continuous water intake LED is lighted when select rele vant quantity of water intake red LED on 2 Effect sound is Ding dong if proper move water intake or cold water water intake Touch Button presses touch and push button It becomes continuous water intake ring ing Relevant quantity of water intake LED flicker at continuous water intake time X After if do not water intake even if selected Continuous take in water 10 0 50 seconds selection It is released automatically on Xx Hot water is incomprehensible Continuous take in water and Continuous take in The 1 00 water selection amount and actual quantity of water intake can be difference 6 OFF of the function of CONT take in water 1 We do Touch one of clear water continuous water intake among cold water continuous water intake or proper move water intake cold water water intake Touch Button or Push Button or as effect sound rings Ding dong Ding dong in case of press Continuous take in water is released Continuous take in water LED OFF 7 Releasing Beep If HOT CONT hot water operation Continuous take in water touch sensor button and HOT hot water dispenser selection touch sensor button is simul i 5 taneously touched for over 3 seconds the function is released on
18. e 2 Hot Water Dispense Mode If HOT hot water selection touch sensor button is selected and the water dispensing button is pressed hot water comes out X If HOT LOCK hot water lock is set then hot water does not come out even though the water dispensing button is pressed X If HOT LOCK hot water lock function is released the water in the hot water tank can be taken by selecting HOT hot water selection touch sensor button and pressing the water dispensing button 3 Cold Water Dispense Mode If COLD cold water selection touch sensor button is selected and water dispensing button is pressed cold water comes out ee eee Seen After early power ON water full LED is lighted up cold water water intake 7 EF irai selection is available y 4 Ambient Water Dispense Mode If AMBI ambient water selection touch sensor button is selected and water dispensing button is pressed ambient water comes out Ce ee Peete X If hot water or ambient water is selected and it is not used for a given time Recerca period Ambient 10 second Hot water L 5second the system will automatically EREE switch into cold water dispense mode Default function X There is not a separate setting and release method for the use of ambient water cold water ice making operation They operate automatically as designated by the program when the power is supplied 6 6 Draining the System for Relocation Installation 1 When Power Plug gets insert
19. e chemicals near the product 9 Do not supply water above 100 F 38 C to the product 10 If an abnormal sound smell or smoke appears from the product during use then pull out the power plug immediately close of the source water at the adaptor valve and then contact A S There is danger of electric shock or fire 11 When ice is not dispensed upon pressing the ICE ice dispense touch sensor button do not shake the product nor strike the product This can cause an immediate reduced product performance 12 When removing ice from the ice dispenser by pressing the ICE ice dispense touch sensor button avoid using a glass cup Glass cups can be broken by abrupt temperature change or as the ice cube strikes the glass 13 You can always reuse this quality ice by placing the ice in a separate storage vessel and storing it in the refrigerator freezer 14 Do not put foreign elements into the waterspout This can cause blocking of the water dispenser Blocking the water dispenser can cause reduced performance and other unwanted consequences 15 If an operation does not function properly even though the touch sensor button has been applied broaden the contact area of which the touch sensor button is pressed using your thumb etc 16 Occasionally ice will not come out because it is caught in ice dispenser hole In such a case remove the ice caught in dispenser hole with your finger etc and then attempt again
20. ems is designed to allow water to continuously flow for 24 hours within the water purifier by adopting a natural circulation method This mode entitle N W P W applies the natural weight of water pressure in order to always supply clean and fresh water Patent No 105585 Pure Ice Production Utilizing the Freezing Point Method The Freezing Point Method produces only the purest ice by supplying purified water to the ice making unit The freezing point principle states that the purest water freezes at 32 F while non pure water will freeze at a temperature below that Energy Saving Function The economically designed IGUASSU ICE 500 delivers purified water to the ice making unit in order to make pure ice while simultaneously sending cooled water to cold water tank This allows the system to maintain a constant cold water temperature thus inherently preventing water waste and helping to con serve energy Automatic Ice Dispenser Upon pressing the ice dispenser touch sensor button the system then slowly rotates the ice storage plate via an integrated motor in order to automatically replenish the ice supply within the storage housing Touch Sensor Application Breaking away from traditional button applications the IGUASSU ICE 500 has a built in touch sensor application This addition has been integrated into the already stellar system with customer convenience in mind The easy to use sensor application allows for effortless and enjoyable drinking
21. he water level of ambient water tank rises more than 25 Operating Point for Hot and Cold water Symptoms Checking items Remarks After a power outage the system performs a deicing action as a safety precaution Therefore irregular ice may come out When irregular ice comes out is it Is the first ice after a caused by power outage a power outage Open the waterspout cover and then check if there are any Remove foreign elements foreign elements from waterspout holes in the hole where the water is drained When the water from the waterspout is not well drained Is the drainage line See Installation found on the rear side of Precautions product bent or blocked Install drain line properly Page 10 11 by heavy objects If the drain line is over 9 84 ft 3M long or placed over 1 ft 30cm above installation surface Install separate drainage pump by requesting A S Water is being supplied Re supply tapwater to the product but ice is pull power plug out not being created and then insert it again Is the water level at usable level after When ice is not the initial power being created application Wait until the water in the ambi ent tank becomes above usable levels about 70 See usage Page 16 Is the ICE FULL lamp turned on Request A S Is ice frozen when tap water is supplied
22. ions and Safety Reinforcement S 68 8 8 The safety features of the product have been enhanced in order to prevent various problems from occurring The system will inform the user s of abnormal occurrences through a flashing display icon and by automati cally stopping the ice making function cold water function and water purification function when an abnor mality in the system is detected Power Saving Function Selecting the power saving function during hot water operation activates the light detection sensor which functions in accordance with the levels of light around the water purifier By activating the power save func tion the user will ultimately reduce power consumption at night Automatic Water Dispensing This system function is convenient to the user because it enables ambient water cold water and hot water to be taken at the press of a button and placed into a container of any kind Another new development found in the IGUASSU ICE 500 is the automatic selection of cold water In many circumstances cold water is found to be the most desired temperature of water for drinking The system has a reset function which shortly after selecting hot or ambient water will automatically switch the cooler into cold water mode Separate Water Delivery from a Single Spout Ambient water cold water and hot water come out from a single spout but independent water hoses are applied so that ambient water cold water and hot water
23. mpressor and circulation pump must operate properly The cold water production process automatically operates according to designated programming e Cold water operation This refers to an operation that makes cold water by continuously circulating and supplying water into the cold water tank Water temperature in the cold water tank is automatically checked by the cold water temperature sensor and if it drops below the set temperature then the cold water operation will automatically stop 4 If cold water production is operating properly the ice making system will produce the ice according to the given water supply e Water supply action This refers to an action to supply about 25G 1Q of cold water every 50 seconds into ice making mechanism in order to make ice e Ice making action This refers to the making of ice by way of an ice tray by supplying cold refrigerant onto the ice tray as it is filled with water e Harvest action This refers to an action to separate the ice created in the ice tray by supplying hot refrigerant onto the tray 5 When the ice storage house is full the ice detection sensor will automatically stop the process 6 Cold temperature control is applied to prevent ice cubes from melting by periodically sending cold air into ice stor age house 7 If ice in the storage house is not used for long periods of time it may melt and during ice dispensing small ice cubes can come out X TDS Total Dissolved S
24. murmuring water flow sound a rattling ice dropping sound etc may occur some times during cold water production process or ice production process 2 Opaque ice may occasionally be dispensed but there is no abnormality in product perfor mance or ice quality 3 TDSs Total Dissolved Solids found in ambient water cold water and ice may vary from one another This is a phenomenon occurs because the ice is created by way of the freezing point method 4 After the system power source is interrupted and then again restarted irregular ice cube sizes may temporarily occur 3 System Component Identification USB pot Full ice display Full water display water lock Hot water operation touch sensor button CONT take in water dispenser touch sensor button Drain switch Hot water dispenser touch sensor button Cold water Ambient water dispenser touch sensor button Ice dispenser touch sensor button Water dispenser hole Water dispenser button Ice dispenser P Power cord Drainage Removed water brine Upper covering Source water Ambient water tank Upper cover Ice making unit Cold water tank LA S ee Ice storage house Waterspout Hot water tank k iy k E Wire condenser a Flushing Valve Water purification filter Lower cover Compressor Pressurizing pump IGUASSU ICE Tiot endl Colil Wetter Purifier with lee 4 Installation Precautions
25. n Setting Touch LOCK HOT Touch Button softly for over 3 seconds 2 Lock lamp red is turned on and the lock function is set setting sound Ding ding ding 3 After lock function is set any function will not operate even though HOT hot water operation or HOT hot water intake selection ICE ice cube spout touch button has been selected e LOCK function helps to prevent spout of ice cube and burns by hot water due to user s carelessness 2 Lock Function Releasing Touch LOCK HOT Touch Button softly for over 3 seconds 2 Lock lamp red is turned off and the lock function is released releasing sound Ding ding ding 3 If lock function is released any function will operate even though HOT hot water operation or HOT hot water intake selection ICE ice cube spout touch button has been selected es 3 HOT hot water Operation Setting ns Touch LOCK HOT and HOT button simultaneously to turn on the hot water system Upon setting the HOT operation on HOT LOCK function will be automatically turned on please follow LOCK function Releasing as explained as above in order to use HOT water 4 HOT hot water Operation Release Touch LOCK HOT and HOT button simultaneously to turn off the hot water system aul when the HOT water system is already turned on A f G 5 ON of the function of CONT take in water 1 Do continuous water intake Touch Button Touch for 2 secon
26. ned water line are located a distance of over 9 84 ft 3M from each the user will inevitably have to install a separate drainage pump A bad wall outlet or plug may cause an electric shock or fire so please do not use them When installing another product water purifier dish washer etc at the same location and the water is derived from the same installation source prepare an independent drain line for each product Precautions during a Transfer Installation Drain the product by first removing the bottom front cover of the product and then draining both the hot and cold residual tanks completely This is done by opening the drainage valves located in the middle of the product Then drain the remaining cold water completely by pressing the water dispenser button with the product tilted forward Then draw all the ice out by touching the ICE ice dispenser touch sensor button When transporting the product in an inclined position try to tilt the product backwards at all times x When moving the product in an inclined position with water not completely drained the water inside the tank may come out while moving the product This could possibly create unwanted damages to the product and sur roundings IGUASSU ICE Cal Water Punitier with leo E 5 Installation Method W e Our company s technician will perform the installation You as the customer should check if the product was properly installed Install the product
27. ng this product by all means read this instruction man ual in detail and after doing so please save it for future reference Table of Contents 1 Product Features 2 Safety Precautions 3 System Component Identification 4 Installation Precautions 5 Installation Method 6 Usage 6 1 Display and System Function Settings 6 2 Operation and Water Dispensing Selection 6 3 Customer Warning Sensor 6 4 Function Settings and Releasing Methods 6 5 Ice and Water Dispensing Method s 6 6 Draining the System for Relocation Installation ms 6 7 Understanding the Ice Making Process and Operation 7 7 Cautions during Use 8 Filter Functions 9 Product Specifications 10 Flow Diagram and Power consumption Tl Wait a Moment Please Check these Before Requesting A S 12 Memo IGUASSU ICE Ilot endl Colil Wetter Purifier with lee 1 Product Features y Water Purification System Providing an Integrated Ice Making Function The IGUASSU ICE 500 is designed for both convenience and practicality as it utilizes a compact ice mak ing system designed to obtain cold water for the production of ice With an ice making mechanism fea turing an ice tray which utilizes the freezing point method as well as reverse osmotic water purification Patent application No 2005 99663 2005 365293 200510127096 9 11 342 117 qT 24 Hour Natural Water Circulation System N W P W This function of ChungHo purification syst
28. olids of ice may increase according to the environment in which the ice is created e The lower the surrounding temperatures the shorter the ice making process will become and the higher the surrounding temperatures the longer the ice making process will become e Do not install or use the product in temperatures below 32 F 0 C and above 100 F 38 C IGUASSU ICE Hiob end Cold Wetter Purifier with Ico E 7 Cautions during Use T 1 For safety reasons insert the power plug into the power outlet 30 minutes after installation 2 This product is for AC NOV 60Hz 220V 50Hz 240V 50Hz and 220V 60Hz only Please connect to the proper power source 3 Do not connect multiple electric appliances into the same wall outlet This can be lead to fire 4 Never move the product while in operation This can cause unwanted problems 5 The temperature of the radiator plate on the rear side of product is hot while the product is in operation so take care not to touch it 6 When power is disconnected to the product due to power outage etc wait 5 minutes and then attempt to re connect the product 7 When the product is not used for long periods of time e Pull the power cord out after closing off the source water e Do not touch the power plug with wet hands There is danger of electric shock or fire 8 Avoid the use of chemicals around the product volatile material inorganic solvent etc and do not plac
29. s etc on the product If these materials enter the inside of product there is danger of electric shock or fire e If the product is damaged or malfunctioning do not disas semble repair or remodel it on your own __ e When wanting to dispense ice ERE dispenser hole touch the ICE touch sensor button and attempt to keep ice from being scattered on the floor hat Take care in order not to allow containers such as cups etc to be inserted into the inside of ice dispenser hole Peete ete Che peter pee pea neg e Do not put foreign materials i into the ice dispenser hole nor block the dispenser hole This can become a cause for system malfunction place container close to the ice e Before cleaning the inside of e Hot water is very hot so to avoid burns always use con tainers such as cups during water dispensing product always pull out the power plug There is danger of electric shock or fire e Do not attempt to operate the product if installed at over a 15 incline This can be the cause of malfunction or unwanted troubles e Do not tilt the product over 45 during transportation Severe inclination can be the cause of reduced performance e Do not install the product ina sloped or unstable position This can be the cause of reduced performance system damaging or overall troubles f i b B
30. stallation of the product X This product is for AC NOV 60Hz 220V 50Hz 240V 50Hz and 220V 60Hz only Check whether water is supplied into the inside of product and whether there is any leakage in or around the tubing connections Check whether water is supplied into the inside of product and whether there is any leakage in or around the tubing connections 11 Use after water has flowed into the storage tanks Can do A S through correct diagnosis because connect exclu LOCK HOT HOT LOCK Hot water locking selection HOT LOCK LED Hot water locking LED HOT LED Hot water operation display LED CONT take in water HOT Hot water selection HOT LED Hot water selection LED COLD AMBI COLD LED Cold water selection LED AMBI LED Ambient water selection LED Water Dispensing Button ICE Ice dispenser ICE LED Ice dispense LED ir USB pot sive use PDA and fill up cellular S phone etc within maximum USB charge 30 minutes O ICE FULL Lights up when ice storage house Cenik is full of ice Yellow green O WATER FULL Lights up when storage house is full ER CULL of ambient water Yellow green Used when setting releasing the hot water lock function Lights up when setting the hot water locking function Red Lights up when setting hot water operation Red Use ON OFF the
Download Pdf Manuals
Related Search