Home
Manual - Gefen
Contents
1. User Manual Release A5 HDMI Detective Plus Important Safety Instructions 10 11 12 13 14 19 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this product near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install or place this product near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer To reduce the risk of electric shock and or damage to this product never handle or touch this unit or power cord if your hands are wet or damp Do not expose this product to rain or moisture Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing t
2. 1 Connect the HDMI Detective Plus to the computer using a USB to Mini USB cable The USB connection will power the HDMI Detective Plus 2 On the PC launch a terminal emulation program We will be using Windows Hyperterminal to illustrate this example Refer to Using the Virtual COM Port for more information on terminal communication settings 3 and enter the following command line loedidtolo paraml where param is the EDID filename The file type must be binary bin In this example we will load an EDID file named visio bin loedidtolo visio bin 4 After executing the command the terminal program responds with the following Waiting for the file to be sent press a to abort 5 Open the Transfer menu and select Send File 6 Click the Browse button to select the EDID file 7 Select Ymodem as the sending protocol 8 Click the Send button 9 After the EDID has been uploaded the following will be displayed File visio bin Size 128 Bytes Download successfully Note in the example above the file size is displayed as 128 bytes This number will vary depending upon the size of the EDID that is uploaded The two most common file sizes are 128 and 256 bytes page 13 Operating the HDMI Detective Plus EDID Programming Uploading an EDID file to a EDID Bank In some instances uploading the EDID directly to the local input is not desired In this case an EDID can also be uploade
3. amp cc 2 This product uses UL or CE listed power supplies 46
4. HDTV 16 9 121 4 3 1 1 1 1 Native HDTV LPCM 2 Channel 24 Bit 20 Bit 48 kHz 44 1 kHz 32 kHz page 40 Firmware Upgrade Procedure Using Gefen Syner G The following items are required to update firmware Gefen Syner G Software Suite HDMI Detective Plus USB to Mini USB cable Firmware file 1 Download and install the Gefen Syner G software Refer to the Syner G User Manual for installation instructions 2 Launch the Gefen Syner G Software Suite 3 Connect a USB to Mini B cable between the HDMI Detective Plus and the computer running Gefen Syner G 4 Click the Refresh List button 5 Select HDMI Detective Plus from the Select Product drop down list at the top of the screen Connected Devices Refresh List Connected Devices HDMI Detective Plus A a EXT MF P MAC 00 1C 91 04 50 05 EXT MFP MAC 00 1C 91 04 50 8E Other Supported Products 1 DisplayPort Detective Plus 1 Booster for HDMI w EDID Detective 1 HDMINGA to 3GSDI Scaler VGAto DVI Scaler VGA wiAudio to HDMI Scaler If the HDMI Detective Plus is not listed in the Select product drop down list click the Refresh list button and wait a few moments then try again page 41 Appendix 6 7 8 9 Firmware Upgrade Procedure Click the Update tab Locate the Download and Install section near the bottom of the application Download and Install Download Latest Version to Gefe
5. and any accompanying documentation without prior written notice 2015 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners IV Operating Notes The Gefen Syner G Software Suite is a free downloadable application from Gefen that provides automatic download and installation of firmware upgrades for this product We highly recommend that you download and install this software as it also provides intuitive management of copying and moving EDID data within the HDMI Detective Plus Download the application here http www gefen com synerg When connecting a HDMI cable between the source and the HDMI Detective Plus the cable should not exceed 30 feet 10 meters in length The HDMI cable between the HDMI Detective Plus and the display or other sink device should not exceed 50 feet 15 meters in length The HDMI Detective Plus comes pre programmed with six Default EDID profiles and six user programmable EDID banks The Default EDID profiles cannot be overwritten or deleted Features and Packing List Features Supports resolutions up to 1080p Full HD and 1920 x 1200 WUXGA HDMI Features Supported gt HDCP 12 bit Deep Color gt LPCM 7 1 audio Dolby TrueHD Dolby Digital Plus and DTS HD Master Audio gt 3DTV pass through gt Lip Sync pass through CEC pass through USB port for advanced programming of features such as EDID management Configura
6. 0x98 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x86 page 31 Advanced Operation Commands prdsedid The prdsedid command displays the EDID stored in the specified EDID bank Syntax prdsedid Parameters None Example prdsedid 0x00 OxFF OxFF OxFF OxFF OxFF OxFF 0x00 0x10 OxAC 0x54 0x40 0x55 0x34 0x31 0x42 x F 0x14 0x01 0x03 0x80 0x2C 0x19 0x78 OxEE OxEE 0x95 0xA3 0x54 0x4C 0x99 0x26 OxOF 0x50 0x54 0xA5 0x4B 0x00 0x71 Ox4F 0x81 0x80 0xA9 OxCO 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x30 0x2A 0x40 OxC8 0x60 0x84 0x64 0x30 0x18 0x50 0x13 0x00 OxBB OxF9 0x10 0x00 0x00 OxIE 0x00 0x00 0x00 OxFF 0x00 0x43 0x32 0x30 0x31 0x52 0x30 0x34 0x45 0x42 0x31 0x34 0x55 0x0A 0x00 0x00 0x00 OxFC 0x00 0x44 0x45 0x4C 0x4C 0x20 0x45 0x32 0x30 0x31 0x30 0x48 Ox0A 0x20 0x00 0x00 0x00 OxFD 0x00 0x38 0x4C 0x1E 0x53 0x10 0x00 Ox0A 0x20 0x20 0x20 0x20 0x20 0x20 0x00 0x7C page 32 Advanced Operation Commands prloedid The prloedid command displays the EDID on the local input Syntax prloedid Parameters None Example prloedid 0x00 OxFF OxFF OxFF OxFF OxFF OxFF 0x00 1 0xA6 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x11 0x01 0x03 0x80 0x81 0x49 0x78 OxOA OxCF 0x9B OxA3 0x57 0x4C Ox9E 0x26 OxOF 0x4A 0x4C 0x20 0x00 0x00 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x1D 0x80 OxDO 0x72 0x1C 0x16 0x20 0x10 0 2 0x80 OxDO 0x72 0x1C 0x1
7. EDID Bank Read the downstream EDID and stores in the local input Erases the specified EDID bank Resets the unit to factory default settings Upgrades the device firmware Displays a list of all available commands Loads the external EDID to the specified EDID bank Loads the external EDID to the local input Bank 0 Displays the contents of the specified EDID bank Displays the downstream EDID Displays the contents of the local input Bank 0 Saves the local EDID to a bin or txt file Displays the current version of firmware IMPORTANT When sending commands a carriage return must be included at the end of the command When using parameters a space must be included between the command and the parameter page 23 Advanced Operation Commands ddcmode The ddcmode command sets the DDC mode Use this command to enable disable HDCP with the local EDID or use EDID pass through with HDCP enabled If param7 is not supplied then the current DDC mode is returned Syntax ddcmode paraml Parameters param1 Value 0 2 Value Description 1 Local EDID with HDCP enable 2 Local EDID with HDCP disable 3 EDID pass through with HDCP enable Examples ddcmode 2 DDC mode set to Local EDID HDCP disable ddcmode DDC mode is Local HDCP Enable page 24 Advanced Operation Commands edidbatolo The edidbatolo command loads the EDID from the specified EDID bank and writes it to the local input Syntax edid
8. Example See Firmware Upgrade Procedure for more information on upgrading the firmware page 28 Advanced Operation Commands help The help command displays a list of available commands This command can also be used to get help for a specific command Syntax help param1 Parameters param1 Command optional Examples help eredidbank Erase EDID bank Syntax eredidbank paraml Paraml 1 6 Example eredidbank 1 help Available Commands help show ver data loedidtoba loedidtolo ediddstolo ediddetolo edidbatolo ediddstoba prloedid prdsedid prbaedid saveloedid ddcmode eredidbank fadefault fw upgrade page 29 Advanced Operation Commands loedidtoba The loedidtoba command loads an EDID file to the specified EDID bank See Uploading an EDID file to a EDID Bank for details on using this command Syntax loedidtoba parami Parameters param1 Bank 1 6 Example loedidtoba 3 Waiting for the file to be sent press a to abort loedidtolo The loedidtoba command loads an EDID file to the local input Once stored in the local input the EDID can be stored to an EDID bank using the 1oedidtoba command for future use See Uploading an EDID file to the Local Input for details on using this command Syntax loedidtolo Parameters None Example loedidtoba Waiting for the file to be sent press a to
9. 6 0x20 0x10 Ox2C 0x01 OxlD 0x00 OxBC 0x52 OxDO 0x1E 0x20 OxB8 0x28 0x55 0x40 0xC4 0x8E 0x21 0x00 0x00 0x18 0x00 0x00 0x00 OxFC 0x00 0x47 0x45 0x46 0x45 0x4E Ox0A 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x00 0x00 0x00 OxFD 0x00 Ox3B 0x3D OxOF 0x44 OxOF 0x00 0x0A 0x20 0x20 0x20 0x20 0x20 0x20 0x01 OxCF 0x02 0x03 0x18 0x71 0x45 0x94 0x13 0x11 0x12 OxIF 0x23 OxOF 0x07 0x07 0x83 0x7F 0x00 0x00 0x65 0x03 0x0C 0x00 0x10 0x00 0x8C OxOA OxDO 0x90 0x20 0x40 0x31 0x20 0x0C 0x40 0x55 0x00 0x13 0x8E 0x21 0x00 0x00 0x18 0x8C Ox0A 0x90 0x20 0x40 0x31 0x20 0x0C 0x40 0x55 0x00 0xC4 0x8E 0x21 0x00 0x00 0x18 OxF3 0x39 0x80 OxDO 0x72 0x38 0x2D 0x40 0x10 0x2C 0x45 0x80 OxC4 Ox8E 0x21 0x00 0x00 0x1E 0x00 0x00 0x00 OxFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 OxFF 0x00 0x00 0x00 0x00 0x00 OxFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 OxFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x68 page 33 Advanced Operation Commands saveloedid Saves the local EDID toa bin or txt file After executing the command line use the YModem protocol within the terminal program e g Hyperterminal etc to save the EDID data to the file See Saving the Local EDID to a File for details on using this command Syntax Saveloedid paraml Parameters param1 Filename Examples Saveloedid edidtest bin Waiting for the file to be received press a to abort page 34 Advanced Operatio
10. PCM 2 Channel 24 Bit 20 Bit 16 Bit Sampling Frequency 192 kHz 176 4 kHz 96 kHz 88 2 kHz 48 kHz 44 1 kHz 32 kHz Audio Format 3 DTS 6 Channel 1536 k Max bit rate Sampling Frequency 96 kHz 88 2 kHz 48 kHz 44 1 kHz 32 kHz Audio Format 4 6 Channel 648 k Max bit rate Sampling Frequency 96 kHz 88 2 kHz 48 kHz 44 1 kHz 32 kHz page 39 Appendix EDID Profile 6 Supported Features Default EDID Profiles 720 x 400 70Hz IBM VGA 640 x 480 60Hz IBM VGA 640 x 480 67Hz Apple Mac II 640 x 480 72Hz VESA 640 x 480 75Hz VESA 800 x 600 60Hz VESA 800 x 600 72Hz VESA 800 x 600 75Hz VESA 832 x 624 75Hz Apple Mac IT 1024 x 768 60Hz VESA 1024 x 768 70Hz VESA 1024 x 768 75Hz VESA 1280 x 1024 75Hz VESA 1152 x 870 75Hz Apple Mac II 1152x864 75 Hz 1280x800 60 Hz 1280x960 60 Hz 1280x1024 60 Hz 1440x900 75 Hz 1680x1050 60 Hz 1600x1200 60 Hz YCbCr 4 4 4 Audio Format 1 16 Bit Sampling Frequency 1920x1080p 59 94 60Hz HDTV 1280x720p 59 94 60Hz HDTV 1920x1080i 59 94 60Hz 720x480p 59 94 60Hz EDTV 1920x1080p 23 97 24Hz 1920x1080p 29 97 3082 640x480p 59 94 60Hz EDIV YCbCr 4 2 2 4 3 Aspect Ratio 16 10 Aspect Ratio 4 3 Aspect Ratio 5 4 Aspect Ratio 16 10 Aspect Ratio 16 10 Aspect Ratio 4 3 Aspect Ratio 16 9 15 9 2 1 16 9 11 16 9 32127 HDTV 16 9 1 1
11. RRO O RA 23 Appendix RI EDID e ea 38 Firmware Upgrade Procedure E 41 Mer E 41 Using RS 232 Commands ann 44 idien euden eege 45 viii 01 Getting Started BRA 2 EAC Ee 2 pe 2 RARA ROOT 2 A 2 Learen EE 4 Connecting the HDMI Detective 4 Sample Aditzen RTE Let EE 4 Getting Started Panel Layout Back Top Front Left page 2 Getting Started Name DIP Switches HDMI Out WR Prog HDMI In USB Power DV DC Panel Layout Description Use this DIP switch bank to select a pre programmed EDID See EDID Programming for more information Connect the Hi Def display to this port using an HDMI cable Write enable switch Flip this switch to the E position to allow the HDMI Detective Plus to be programmed with an EDID Set this switch to the D position to disable programming and prevent an accidental erasure of the current EDID Press this button to begin programming an EDID See EDID Programming for more information Connect the Hi Def source to this port using the included HDMI cable Connect the included USB Type A to Mini USB Type B cable to this connector This interface provides serial control for the detective This LED will glow bright green when the unit is powered Connect the included 5V DC power supply to this power receptacle 3 Installation C
12. abort page 30 Advanced Operation Commands prbaedid The prbaedid command displays the EDID from the specified bank Syntax prbaedid parami Parameters param1 Bank 1 Example prbaedid 3 0x00 OxFF OxFF OxFF OxFF OxFF OxFF 0x00 0x34 OxA9 OxAF 0x01 0x01 0x01 0x01 0x00 0x14 0x01 0x03 0x80 0x00 0x00 0x78 OxOA OxDA OxFF OxA3 0x58 Ox4A OxA2 0x29 0x17 0x49 0x4B 0x00 0x00 0x00 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x02 0x3A 0x80 0x18 0x71 0x38 0x2D 0x40 0x58 0 2 0x45 0x00 OxBA 0x88 0x21 0x00 0x00 0x1E 0x01 0x1D 0x80 0x18 0x71 0x1C 0x16 0x20 0x58 0x2C 0x25 0x00 OxBA 0x88 0x21 0x00 0x00 0x9E 0x00 0x00 0x00 OxFC 0x00 0x50 0x61 0x61 0x73 0Ox6F Ux6E 0x69 0x63 0x54 0x56 0x30 Ox0A 0x00 0x00 0x00 OxFD 0x00 0x17 Ox3D OxOF 0x44 OxOF 0x00 0x0A 0x20 0x20 0x20 0x20 0x20 0x20 0x01 0xC7 0x02 0x03 0x2A 0x71 0x49 0x90 0x05 0x20 0x04 0x03 0x02 0x07 0x06 0x01 0x23 0x09 0x07 0x01 0x73 0x03 0x0C 0x00 0x10 0x00 xBS 0x2D 0x2F 0xC0 0x07 0x81 0x49 0x01 xFE 0x06 0x08 0x00 0x00 0x00 0x05 xlF 0x01 0x01 OxlD 0x00 0x72 0x51 0xDO 1 0x20 0x6E 0x28 0x55 0x00 UBA 0x88 0x21 0x00 0x00 0x1E Ox8C 0x0A OxDO 0x8A 0x20 OxEO 0x2D 0x10 0x10 0x3E 0x96 0x00 OxBA 0x88 0x21 0x00 0x00 0x18 0x8C UxDO 0x8A 0x20 0XE0 0x2D 0x10 0x10 0x3E 0x96 0x00 0x0B 0x88 0x21 0x00 0x00 0x18 0x8C Ox0A OxAU 0x14 0x51 0x16 0x00 0x26 0x7C 0x43 0x00 OxBA 0x88 0x21 0x00 0x00
13. ank 3 4 5 Bank 6 Default EDID 1 EDID Mode Default EDID 2 Default EDID 3 Default EDID 4 Default EDID 5 Default EDID 6 Custom 8 Local EDID will automatically be selected Default EDID profiles cannot be copied to a bank 9 Click the Copy button Upload EDID to Local EDID Copy EDID from DefautEDID5 to Local EDID EDID Mode Internal Custom 10 Default EDID 5 is now present on the local input page 16 Operating the HDMI Detective Plus EDID Programming Using RS 232 Commands 1 Install the driver for the virtual COM port See Using the Virtual COM Port for more information already installed and you can skip to Step 2 NOTE If you have installed Gefen Syner G then the driver is 2 Launch the desired terminal emulation software e g Hyperterminal 3 Select the COM port for the HDMI Detective Plus 4 Inthe terminal program type the following command followed by the number of the Default EDID profile you wish to copy to the local input For example the following copies Default EDID 5 to the local input ediddetolo 5 5 After the data from Default EDID 5 has been copied to the local input the following will be displayed EDID default 5 stored to local 6 You can use the prloedid command to display the contents of the local EDID to the screen page 17 03 Advanced Operation Usmo rme Vintu alle OMRON ERE Eee TAR 20 Ma
14. ank 3 we would type and enter the following command tediddstoba 3 page 10 Operating the HDMI Detective Plus EDID Programming Loading an EDID from a EDID Bank NOTE Before EDID can be loaded to the local input the EDID must be stored in an EDID bank See Recording an EDID to a EDID Bank for more information The HDMI Detective Plus provides the option of loading the EDID data stored in a EDID bank to the local input HDMI input 1 Begin by powering on the HDMI Detective Plus 2 Select the EDID from the EDID bank using the piano DIP switches Refer to the chart below DIP switch 4 is not used when selecting an EDID bank Bank DIP SW 1 DIP SW 2 DIP SW 3 DIP SW 4 1 ON OFF OFF Not used 2 OFF ON OFF 3 ON ON OFF 4 OFF OFF ON 6 3 Set the WR write switch to the E position in order to allow the EDID to be written to the local input 4 Press the Prog button The Power LED will slowly flash green as the EDID is written to the local input Once completed the Power LED will glow solid green 5 Set the WR write switch to the D position to prevent the EDID from being accidentally overwritten page 11 Operating the HDMI Detective Plus EDID Programming Saving the Local EDID to a File Once an EDID has been recorded see Programming an External EDID the EDID can be saved to a file on a computer using the saveloedid command The EDID must
15. annel 24 Bit 20 Bit kHz 44 1 kHz 32 kHz 16 9 1 1 Native 16 9 1 1 4 3 16315 16 9 64 45 16 9 1 1 o Channel Z4 Bit 20 Bit kHz 44 1 kHz 32 kHz 16 9 1 1 Native 16 9 131 4353 16 15 16 9 64 45 16 9 1 1 2 Channel 24 Bit 20 B1t kHz 44 1 KHz 32 kHz page 38 Appendix EDID Profile 4 Default EDID Profiles Supported Features 640 x 480 60Hz IBM VGA 1920x1080i 59 94 60Hz HDTV 16 9 1 1 Native 1280x720p 59 94 60Hz HDTV 16 9 1 1 720x480p 59 94 60Hz EDTV 16 9 32 27 720 1440 4801 59 94 60Hz SDTV 16 9 32 27 1920x1080p 59 94 60Hz HDTV 16 9 1 1 Audio Format 1 LPCM 2 Channel 24 Bit 20 Bit 16 Bit Sampling Frequency 48 kHz 44 1 kHz 32 kHz YCbOr 41474 43232 720 x 400 70Hz IBM VGA 640 x 480 60Hz IBM VGA 800 x 600 60Hz VESA 1024 x 768 60Hz VESA 1280x720 60 Hz 16 9 Aspect Ratio 1280x1024 60 Hz 5 4 Aspect Ratio 1920x10801 59 94 60Hz HDTV 16 9 1 1 1280x720p 59 94 60Hz HDTV 16 9 1 1 720x480p 59 94 60Hz EDTV 4 3 8 9 720x480p 8 59 94 60Hz EDTV 16 9 32 27 1920x1080p 59 94 60Hz HDTV 16 9 1 1 Native 1440x480p 8 59 94 60Hz 4 3 4 9 or 8 9 1440x480p 8 59 94 60Hz 16 9 16 27 or 32 27 YCbCr 4 4 4 YCbCr 4 2 2 Audio Format 1 LPCM 8 Channel 24 Bit 20 Bit 16 Bit Sampling Frequency 96 kHz 88 2 kHz 48 kHz 44 1 kHz 32 kHz Audio Format 2 L
16. batolo paraml Parameters param1 EDID bank 1 6 Example edidbatolo 2 EDID bank 2 stored to local ediddetolo The ediddetolo command reads the specified Default EDID profile and copies it to the local input Syntax ediddetolo paraml Parameters param1 Default EDID 1 6 Example tediddetolo 5 EDID default 5 stored to local page 25 Advanced Operation Commands ediddstoba The ediddstoba command reads the downstream EDID and stores it to the specified EDID bank Syntax ediddstoba paraml Parameters param1 EDID bank EN sas 6 Examples tediddstoba 3 Downstream EDID stored in bank 3 ediddstolo The ediddstolo command reads the downstream EDID and stores it to the local input Syntax ediddstolo Parameters None Example ediddstolo Downstream EDID stored to local page 26 Advanced Operation Commands eredidbank The eredidbank command erases the specified EDID bank Syntax eredidbank parami Parameters param1 Bank 1 6 Example eredidbank 2 EDID bank 2 is erased fadefault The fadefault command resets the HDMI Detective Plus to factory default settings Syntax fadefault Parameters None Examples fadefault Return to Factory default page 27 Advanced Operation Commands fw_upgrade The fw_upgrade command upgrades the device firmware Syntax fw upgrade Parameters None
17. be loaded to the local input HDMI input before it can be saved to a file 1 Connect the HDMI Detective Plus to the computer using a USB to Mini USB cable The USB connection will power the HDMI Detective Plus 2 Onthe PC launch a terminal emulation program We will be using Windows Hyperterminal to illustrate this example Refer to Using the Virtual COM Port for more information on terminal communication settings 3 Type and enter the following command line saveloedid paraml where paraml the filename used to save the EDID The file type can be either a txt file bin file In this example we will save the local EDID to the filename Dell30 bin Tsaveloedid 4 After executing the command the terminal program responds with the following Waiting for the file to be received press a to abort 5 Open the Transfer menu and select Receive File 6 Click the Browse button to select the location where the file will be saved 7 Select Ymodem as the receiving protocol 8 Click the Receive button 9 After the EDID has been saved the following will be displayed Saving EDID successfully page 12 Operating the HDMI Detective Plus EDID Programming Uploading an EDID file to the Local Input The loedidtolo command allows any EDID file to be directly uploaded to the local input HDMI input of the HDMI Detective Plus The EDID file must be in binary bin format
18. ble using Gefen EDID Tool software downloadable from Gefen website DDC re clocking Records the EDID from a display e 6 pre programmed EDID profiles 6 user programmable EDID banks Selectable HDCP pass through Field upgradable firmware via USB port Compact and portable Packing List The HDMI Detective Plus ships with the items listed below If any of these items are not present in your box when you first open it immediately contact your dealer or Gefen 1 x HDMI Detective Plus 1 x 1ft Locking HDMI Cable 1 x 6ft Mini USB to USB Cable 1 x 5V DC power supply 1 x Quick Start Guide vi HDMI Detective Plus Table of Contents 01 02 03 04 Getting Started Panel AAE 2 O 2 Re E o EA 2 CPAP o O 2 Ger 2 Sel AAA 4 Connecting the HDMI Detective BIOS rss 4 sample Wing Diagramm 4 Operating the HDMI Detective Plus GEI dela du une e DE 8 Programming an External RRE 8 Passito HOCP Connie 9 Recording an EDID to a EDID Bank E 10 Loading EDID from a EDID Bank 11 Saving the Local EDID to amp Files 12 Uploading an EDID file to the Local 13 Uploading an EDID file to a EDID Bank ne 14 Using the Default EDID Profiles 15 Advanced Operation Using the Virtual COM Por 20 Manual Driver lata ei Pu eia EO 21 CE
19. copied to a bank or to the local input HDMI In Unlike the EDID data stored in EDID banks these Default EDID profiles cannot be overwritten or deleted See Default EDID Profiles for a description Default EDID profile manipulation can be handled through RS 232 commands or by using the Gefen Syner G Software Suite We will cover both methods Using Gefen Syner G 1 Download and install the Gefen Syner G software Refer to the Syner G User Manual for installation instructions 2 Launch the Gefen Syner G Software Suite 3 Connect a USB to Mini B cable between the HDMI Detective Plus and the computer running Gefen Syner G 4 Click the Refresh List button Select HDMI Detective Plus from the Select Product drop down list at the top of the screen Connected Devices HDMI Detective Plus COM8 1 EXT MFP MAC 00 1C 91 04 50 05 EXT MFP MAC 00 1C 91 04 50 8E Other Supported Products 1 DisplayPort Detective Plus 1 Booster for HDMI WEDID Detective 1 HOMINGAto 3GSDI Scaler VGAto DVI Scaler VGAw Audio to HDMI Scaler If the HDMI Detective Plus is not listed in the Select product drop down list click the Refresh list button and wait a few moments then try again page 15 Operating the HDMI Detective Plus EDID Programming 6 Click the Manage EDID tab 7 Select the desired Default EDID profile from the Copy EDID from drop down list Upload EDID to Local EDID Copy EDID from Down Stream fo Local EDID B
20. d to the desired EDID bank using the loedidtoba command The EDID file must be in binary bin format 1 Connect the HDMI Detective Plus to the computer using a USB to Mini USB cable The USB connection will power the HDMI Detective Plus 2 On the PC launch a terminal emulation program We will be using Windows Hyperterminal to illustrate this example Refer to Using the Virtual COM Port for more information on terminal communication settings 3 Type and enter the following command line loedidtoba paraml where param1 is the EDID bank where the EDID file will be uploaded The file type must be binary bin In this example we will upload an EDID file to EDID bank 3 loedidtoba 3 4 After executing the command the terminal program responds with the following Waiting for the file to be sent press a to abort 5 Open the Transfer menu and select Send File 6 Click the Browse button to select the EDID file 7 Select Ymodem as the sending protocol 8 Click the Send button 9 After the EDID has been successfully uploaded to the EDID bank the message Download successfully will be displayed along with the filename and size The following is an example File viewsonic bin Size 128 Bytes Download successfully page 14 Operating the HDMI Detective Plus EDID Programming Using the Default EDID Profiles The HDMI Detective Plus comes with six Default EDID profiles which can be
21. g prompt will be displayed on the terminal screen Waiting for the file to be sent press a to abort Click Transfer gt Send File Select the firmware file from Step 2 Select YModem from the Protocol drop down list and click the OK button The firmware update procedure will begin This process should take only a few seconds After the firmware update is successful the following message will appear Download successfully You have to reset the device to a new version that would start work Disconnect and reconnect the power supply on the HDMI Detective Plus The firmware upgrade process is complete page 44 Appendix Specifications Resolution max 1080p Full HD Maximum Pixel Clock Status indicator Input Output USB DIP switches front panel Programming button Write protect switch Power Input Power Consumption Dimensions W x H x D Unit Weight 225 MHz 1 x LED bi color green red 1 x HDMI Type A 19 pin female 1 x HDMI Type A 19 pin female 1 x USB Mini B 4 x Piano DIP switches for pre programmed EDID selection 1 x Push button momentary switch 1 x 2 position slide switch 1x 5V DC SW max 27 x 1 3 x 1 8 68mm x 33mm x 46mm 0 18 Ibs 0 08 kg page 45 Stretch it Switch it Split it Gefen s got it 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com
22. he unit must be programmed with an EDID Once programmed the EDID data will be read by the source providing all the necessary details of the type of signal that the display or other sink device can process When a source device uses the EDID stored the HDMI Detective Plus this is called loca mode Programming an External EDID 1 Begin by powering on the display or other sink device containing the EDID to be recorded 2 Connect a HDMI cable from the sink device to the HDMI Out port on the detective 3 Make sure all DIP switches are in the OFF position 4 Set the WR write switch to the E position in order to allow the EDID to be written to the detective DIP switches Slide switch to in OFF position the E position 5 Connect the included 5V DC power supply to the detective The Power LED on the other side of the unit will glow solid green if the sink device contains a valid EDID If the EDID is corrupt or invalid then the Power LED will glow bright red 6 Press Prog button The Power LED will slowly flash as the EDID is recorded 7 Once the EDID has been recorded the Power LED glow bright green NOTE When the HDMI Detective Plus is used in local mode HPD Hot Plug Detect is always high page 8 Operating the HDMI Detective Plus EDID Programming The table below provides a status summary of the Power LED Detective is powered HPD is high EDID has been successfu
23. lly written to a EDID bank or the local input Solid green Bad EDID HPD is low Solid red Flashing EDID is being read from sink green o EDID is being read from EDID bank Passing HDCP Content In order for the HDMI Detective Plus to pass HDCP content e g Blu ray etc set DIP switch 4 to the OFF up position DIP switch 4 in OFF position To disable HDCP pass through set DIP switch 4 to the ON down position page 9 Operating the HDMI Detective Plus EDID Programming Recording an EDID to a EDID Bank When an EDID is recorded the EDID data is stored on the local input HDMI In port However the HDMI Detective Plus also allows EDID data to be stored directly to any of 6 EDID banks Each EDID can then be recalled at any time The data in an EDID bank is saved even when the power is disconnected 1 Begin by powering on the display or other sink device containing the EDID to be recorded 2 Connect a HDMI cable from the sink device to the HDMI Out port on the detective 3 Connect a USB to Mini USB cable between the detective and a PC The USB connection will power the detective 4 On the PC launch a terminal emulation program e g Hyperterminal etc Refer to Using the Virtual COM Port for more information on terminal communication settings 5 Execute the ediddstoba command specifying the bank in which to store the EDID For example if we wanted to store the EDID in b
24. n Commands show ver data Displays the current firmware and FPGA version Syntax show ver data Parameters None Example show ver data EXT HD EDIDPN Release version 2 23 Release date Oct 20 2013 Release time 17 22 17 page 35 04 Appendix Default EDD eg 38 Grade EA 41 Sy Me te AME T 41 RS 232 EARE re 44 A eT EE 45 Default EDID Profiles The HDMI Detective Plus comes 6 pre programmed EDID profiles The details of each default EDID profile is described below EDID Profile 1 Supported Features 640 x 480 60Hz 1920210801 8 50Hz HDTV 1280 720 50Hz HDTV 720 576 8 50Hz EDTV 1 720 576 50Hz EDTV 1920210805 50Hz HDTV Audio Format 1 LPCM 16 Bit Sampling Frequency 48 YCbCr 4 4 4 YCbCr 4 2 2 640 x 480 60Hz 1920x10801 8 50Hz HDTV 1280x720p 50Hz HDTV 720x576p 50Hz EDTV 720x576p 50Hz EDTV 1920x1080p SOHz HDTV Audio Format 1 LPCM l6 Bit Sampling Frequency 48 YCbCr 4 4 4 YCbCr 4 2 2 640 x 480 60Hz 1920 10801 50Hz HDTV 1280x720p 50Hz HDTV 720x576p 50Hz EDTV 720x576p 50Hz EDTV 1920x1080p 50Hz HDTV Audio Format 1 LPCM 16 Bit Sampling Frequency 48 YCbCr 4 4 4 YCbCr 4 2 2 IBM VGA IBM VGA IBM VGA 16 9 1 1 Native 16 9 1 1 4 3 16 15 16 9 64 45 16 9 131 8 Ch
25. n Syner G Download to Computer Click the Start button nstall St Version to Gefen Syner G Install Save After a few moments the latest firmware will automatically be downloaded Download and Install Download Latest Version to Gefen Syner G Download to Computer 10 Click the Install button The installation process will begin nstall st Version to Gefen Syner G page 42 Appendix Firmware Upgrade Procedure 11 After the software has been installed click the OK button on the message box that is displayed nstall st Version to Gefen Syner G 12 Disconnect and reconnect the power supply on the HDMI Detective Plus 13 The firmware upgrade process is complete page 43 Appendix Firmware Upgrade Procedure Using RS 232 Commands The following items are required to update firmware Terminal emulation program e g Windows Hyperterminal HDMI Detective Plus USB to Mini USB cable Firmware file The following instructions are outlined for use with Hyperterminal If using a different terminal emulation program you will need to locate the associated features on your program 1 Download the firmware file from the Support gt Downloads section of the Gefen web site Extract the contents of the zip file to the Windows desktop The zip file will contain the firmware file bin Within the terminal program enter the following command fw upgrade The followin
26. n next page page 21 Advanced Operation Using the Virtual COM Port 9 Select the inf file within the folder created in step 2 then click the OK button 10 While attempting to install the driver the following dialog may be displayed E Windows Security amp Windows can t verify the publisher of this driver software Don t install this driver software You should check your manufacturer s website for updated driver software for your device gt Install this driver software anyway Only install driver software obtained from your mal afacturer s website or disc Unsigned software from other sources may harm your computer or steal information w See details 11 Select Install this software anyway The driver installation may take a couple of minutes 12 Once the driver has been successfully installed click the Close button on the dialog to complete the installation page 22 Advanced Operation Commands The following list of commands are used to control various features of the HDMI Detective Plus Command ddcmode fedidbatolo edi edi ddetolo ddstoba tediddstolo eredidbank fadefault w_ upgrade help loedidtoba loedidtolo prbaedid prdsedid prloedid saveloedid show ver data Description Sets the DDC mode Copies the specified EDID bank to the local input Copies the default EDID bank to the local input Read downstream EDID and stores in
27. next to the driver COM 8 has been automatically assigned by the driver page 20 Advanced Operation 8 Using the Virtual COM Port Manual Driver Installation e NOTE Manual installation of the driver is required only if the computer does not recognize the HDMI Detective Plus Download the driver from the Downloads section of the Gefen Web site http www gefen com support download jsp Extract the contents of the ZIP file to the Windows Desktop From the Device Manager expand the Ports section Disconnect the USB cable from the detective then press the F5 key on the computer to refresh the device list Reconnect the USB cable to the detective Unknown device should now appear under the Ports section Right click on Unknown device and select Update Driver Software Select Browse my computer for driver software y Device Manager File Action View Help mE BA iS 2 19 15 il Update Driver Software Communications Port COMI How do you want to search for driver software gt Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device unless you ve disabled this feature in your device installation settings gt Browse my computer for driver software Locate and install driver software manually D J b 3 18 4 On the next screen click the Browse button continued o
28. nual Driver AEN a oo 21 Command eer 23 Using the Virtual COM Port This step is only required if you will be using the RS 232 command set to communicate with the HDMI Detective Plus When the HDMI Detective Plus is connected to a computer running the Windows operating system a virtual communications port is created 1 Connect the USB to Mini USB cable between the detective and the PC 2 COM port driver will automatically be installed HDMI EDID BOOSTER COM11 Device driver software installed successfully 3 Goto Control Panel gt Device Manager and click Ports to see the driver The driver will be identified as HDMI EDID BOOSTER as shown below 9 Human Interface Devices ca IDE ATA ATAPI controllers Keyboards n Mice and other pointing devices Monitors Network adapters KR Portable Devices TZ Ports COM 82 LPT 727 Communications Port COM1 9 HDMI EDID BOOSTER 8 N 7 Intel R Active Management Technology SOL COM3 Processors Sound video and game controllers System devices Universal Serial Bus controllers USB Virtualization 4 2 Ports COM amp LPT y Communications Port COMI Set the terminal program to use the specified COM port 4 Refer to Manual Driver Installation if driver is not present or is listed as an unknown device 5 Launch the terminal emulation program and set the terminal emulation program to use the COM port specified
29. o qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Batteries that may be included with this product and or accessories should never be exposed to open flame or excessive heat Always dispose of used batteries according to the instructions HDMI Detective Plus Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers ou
30. onnecting the HDMI Detective Plus 4 STOP Before connecting the HDMI Detective Plus the unit must be programmed with an EDID See EDID Programming for more information before continuing 1 Connect the included HDMI cable from the Hi Def source to the HDMI input on the detective If using a different HDMI cable this cable should not exceed 30 feet 10 meters in length 2 another HDMI cable to connect the display or other sink to the HDMI Out port on the detective The HDMI cable should not exceed 50 feet 15 meters in length 3 OPTIONAL Connect a USB to Mini USB cable to control the detective using serial commands See Using the Virtual COM Port for more information on using this feature 4 Connect the included 5V DC power supply to the power receptacle on the detective 5 Connect the power supply to an available electrical outlet Sample Wiring Diagram HDMI CABLE Er HDMI Detective Plus EXT HD EDIDPN page 4 02 Operating the HDMI Detective Plus P FOG Farin Inte cee Programing Saiz EEE e Ee GN Ee Il nno Recording EDID to a BUE NEE loading an EDID roma EDID Bank EE Saving the Local EDID toa E Uploading EDID file to the Cocal EU een Uploading an EDID fileto a EDID Bank re Using the Default EDID Ee 0 EE EDID Programming Before using the HDMI Detective Plus t
31. tside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site HDMI Detective Plus Contacting Gefen Technical Support Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Email support gefen com Visit us on the Web www gefen com Technical Support Hours 8 00 AM to 5 00 PM Monday Friday Pacific Time HDMI Detective Plus is a trademark of Gefen LLC Important Notice Gefen LLC reserves the right to make changes in the hardware packaging
Download Pdf Manuals
Related Search
Related Contents
Vedere la 取扱説明書 - M Manual del propietario del aerocargador Furlmatic FM1803 Série AB9 Copyright © All rights reserved.
Failed to retrieve file