USER MANUAL LFW408A LED FLASHER
Contents
1. G4 C G1 amp G4 alt G2 amp G3 D G1 alt G2 alt G3 alt G4 E G1 amp G2 amp G38 amp G4 Momentarily apply VDC once for next pattern FP FLASH PATTERNS Random Steady Single Mega Double Triple Quad Quint 8 Flash Single Quad 10 Single H L 11 Single Triple Quint Momentarily apply VDC once for next pattern quickly 3 times to FP 0 O 2 3 4 5 6 7 8 7 OPTIONAL CONNECTIONS GREEN apply to VDC for low power ORANGE for LED switch BLUE apply to VDC to activate NOTE The BLUE wire can be connected to other switches such as siren so that it can be activated when siren is switched on 0611212. USER MANUAL LFW408A LED FLASHER SPECIFICATIONS TROUBLE SHOOTING When LED lightheads don t function inactive check status of ERROR LED indicator Input Voltage 12VDC Output Current 3Amps per Group Number of Groups 4 Number of Outlets 2 per Group Flash Patterns 12 FLASH PATTERN INDICATOR ERROR to LED VDC to LED VDC GROUP 1 GROUP 2 GROUP 3 GROUP 4 INDICATOR GROUP 3 GROUP 4 connector GREEN amp WHITE BLUE amp WHITE connector CONTROL GROUP ei a CHANGE to LED VDC to LED VDC LOW AUXILIARY POWER ACTIVATION LED SWITCH PATTERN PATTERN CHANGE INDICATOR to LED VDC to LED VDC TO VDC TO VDC GROUP 1 g WHITE amp RED GROUP 2 WARNING All user supplied extension wires that connector connector connect to VDC amp VDC terminals the size needed to LED VDC to LED VDC must be sized to supply at least 125 of the maximum operating current The length of the wires determines 1 to 7 ft use IBAWG wire 7 to 14 ft use 16AWG wire 14 to 25 ft use IJ4AWG wire 25 to 35 ft use 12AWG wire If ERROR LED is off check that polarity VDC amp VDC wires of the CONTROL or the GROUPS are not reversed If ERROR LED is on check that polarity VDC amp VDC wires are not touching each other short circuit If there is no short circuit check that the current of connected lightheads do not exceed 3Amps GROUP GROUP PATTERNS A G1 amp G2 alt G3 amp G4 B G1 amp G3 alt G2 amp
Download Pdf Manuals
Related Search